0% found this document useful (0 votes)

21 views55 pages

711194866800357711192464105866sii Ds 1084 - Public PDF

The SiI9136-3/SiI1136 HDMI Deep Color Transmitter Data Sheet provides detailed specifications and functional descriptions for the HDMI transmitter, including video and audio input capabilities, control features, and electrical specifications. It outlines the product family, pin diagrams, and design recommendations, along with timing diagrams and feature information. This document serves as a comprehensive guide for understanding the functionality and application of the SiI9136-3/SiI1136 transmitter.

Uploaded by

ken.avd.bot

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

21 views55 pages

711194866800357711192464105866sii Ds 1084 - Public PDF

Uploaded by

ken.avd.bot

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 55

SiI9136-3/SiI1136 HDMI Deep Color

Transmitter

Data Sheet

SiI-DS-1084-D

June 2017

Downloaded from Arrow.com.

SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

Contents
Acronyms in This Document ................................................................................................................................................. 6
1. General Description ...................................................................................................................................................... 7
1.1. Video Input ........................................................................................................................................................... 7
1.2. Audio Input ........................................................................................................................................................... 7
1.3. HDMI Output ........................................................................................................................................................ 7
1.4. Control Capability ................................................................................................................................................. 7
1.5. Packaging .............................................................................................................................................................. 7
2. Product Family .............................................................................................................................................................. 8
3. Functional Description .................................................................................................................................................. 9
3.1. Video Data Input and Conversion ......................................................................................................................... 9
3.1.1. Input Clock Multiplier/Divider .................................................................................................................... 10
3.1.2. Video Data Capture ..................................................................................................................................... 10
3.1.3. Embedded Sync Decoder ............................................................................................................................ 10
3.1.4. Data Enable Generator ............................................................................................................................... 10
3.1.5. Combiner .................................................................................................................................................... 10
3.1.6. 4:2:2 to 4:4:4 Upsampler ............................................................................................................................ 10
3.1.7. RGB Range Expansion ................................................................................................................................. 10
3.1.8. Color Space Converter ................................................................................................................................ 11
3.1.9. RGB/YCbCr Range Compression ................................................................................................................. 11
3.1.10. 4:4:4 to 4:2:2 Downsampler ....................................................................................................................... 11
3.1.11. Clipping ....................................................................................................................................................... 11
3.1.12. 18-to-8/10/12/16-Dither ............................................................................................................................ 11
3.2. Audio Data Capture............................................................................................................................................. 11
3.3. Framer ................................................................................................................................................................. 11
3.4. HDCP Encryption Engine/XOR Mask ................................................................................................................... 11
3.5. HDCP Key ROM ................................................................................................................................................... 12
3.6. TMDS Transmitter ............................................................................................................................................... 12
3.7. GPIO .................................................................................................................................................................... 12
3.8. Hot Plug Detector ............................................................................................................................................... 12
3.9. CEC Interface ....................................................................................................................................................... 12
3.10. DDC Master I2C Interface ................................................................................................................................ 12
3.11. Receiver Sense and Interrupt Logic ................................................................................................................ 13
3.12. Configuration Logic and Registers .................................................................................................................. 13
3.13. I2C Slave Interface ........................................................................................................................................... 13
4. Electrical Specifications .............................................................................................................................................. 14
4.1. Absolute Maximum Conditions .......................................................................................................................... 14
4.2. Normal Operating Conditions ............................................................................................................................. 14
4.2.1. I/O Specifications ........................................................................................................................................ 15
4.2.2. DC Power Supply Specifications .................................................................................................................. 16
4.3. AC Specifications ................................................................................................................................................. 16
4.3.1. Video/HDMI Timing Specifications ............................................................................................................. 16
4.3.2. Audio AC Timing Specifications ................................................................................................................... 17
4.3.3. Video AC Timing Specifications ................................................................................................................... 18
4.3.4. Control Signal Timing Specifications ........................................................................................................... 18
4.3.5. CEC Timing Specifications ........................................................................................................................... 19
4.4. Timing Diagrams ................................................................................................................................................. 19
4.4.1. Input Timing Diagrams ................................................................................................................................ 19
4.4.2. Reset Timing Diagrams ............................................................................................................................... 20
4.4.3. TMDS Timing Diagram ................................................................................................................................ 20
4.4.4. Audio Timing Diagrams ............................................................................................................................... 21
4.4.5. I2C Timing Diagrams .................................................................................................................................... 21
5. Pin Diagram and Descriptions ..................................................................................................................................... 22

© 2010-2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are
trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.

2 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

5.1. Pin Diagram......................................................................................................................................................... 22

5.2. Pin Descriptions .................................................................................................................................................. 23
5.2.1. Video Data Input ......................................................................................................................................... 23
5.2.2. TMDS Output .............................................................................................................................................. 24
5.2.3. Audio Input ................................................................................................................................................. 24
5.2.4. DDC, CEC, Configuration, and Control ........................................................................................................ 25
5.2.5. Power and Ground ...................................................................................................................................... 25
5.2.6. Not Connected and Reserved ..................................................................................................................... 25
6. Feature Information ................................................................................................................................................... 26
6.1. RGB to YCbCr Color Space Converter.................................................................................................................. 26
6.2. YCbCr to RGB Color Space Converter.................................................................................................................. 26
6.3. I2C Register Information ..................................................................................................................................... 27
6.4. I2S Audio Input .................................................................................................................................................... 27
6.5. Direct Stream Digital Input ................................................................................................................................. 27
6.6. S/PDIF Input ........................................................................................................................................................ 27
6.7. I2S and S/PDIF Supported MCLK Frequencies ..................................................................................................... 27
6.8. Audio Downsampler Limitations......................................................................................................................... 28
6.9. High Bitrate Audio on HDMI ............................................................................................................................... 29
6.10. Power Domains ............................................................................................................................................... 29
6.11. Internal DDC Master ....................................................................................................................................... 30
6.12. Deep Color Support ........................................................................................................................................ 30
6.13. Source Termination ........................................................................................................................................ 31
6.14. 3D and 4K Video Formats ............................................................................................................................... 31
6.15. Control Signal Connections ............................................................................................................................. 32
6.16. Input Data Bus Mapping ................................................................................................................................. 33
6.16.1. Common Video Input Formats .................................................................................................................... 33
6.16.2. RGB and YCbCr 4:4:4 Separate Sync ........................................................................................................... 34
6.16.3. YC 4:2:2 Separate Sync Formats ................................................................................................................. 36
6.16.4. YC 4:2:2 Embedded Syncs Formats ............................................................................................................. 38
6.16.5. YC Mux 4:2:2 Separate Sync Formats ......................................................................................................... 40
6.16.6. YC Mux 4:2:2 Embedded Sync Formats ...................................................................................................... 42
6.16.7. RGB and YCbCr 4:4:4 Dual Edge Mode Formats ......................................................................................... 44
7. Design Recommendations .......................................................................................................................................... 47
7.1. Power Supply Decoupling ................................................................................................................................... 47
7.2. Power Supply Sequencing ................................................................................................................................... 47
7.3. ESD Recommendations ....................................................................................................................................... 47
7.4. High-Speed TMDS Signals ................................................................................................................................... 48
7.4.1. Layout Guidelines ....................................................................................................................................... 48
7.4.2. TMDS Output Recommendation ................................................................................................................ 48
7.4.3. EMI Considerations ..................................................................................................................................... 48
8. Packaging .................................................................................................................................................................... 49
8.1. ePad Requirements............................................................................................................................................. 49
8.2. PCB Layout Guidelines ........................................................................................................................................ 49
8.3. Package Dimensions ........................................................................................................................................... 50
8.4. Marking Specification ......................................................................................................................................... 51
8.5. Ordering Information .......................................................................................................................................... 51
References .......................................................................................................................................................................... 52
Standards Documents..................................................................................................................................................... 52
Standards Groups ........................................................................................................................................................... 52
Lattice Semiconductor Documents ................................................................................................................................. 52
Technical Support ........................................................................................................................................................... 53
Revision History .................................................................................................................................................................. 54

SiI-DS-1084-D 3
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

Figures
Figure 1.1. Typical Application for Streaming Sticks ............................................................................................................. 7
Figure 3.1. SiI9136-3/SiI1136 Functional Block Diagram ...................................................................................................... 9
Figure 3.2. Transmitter Video Data Processing Path ............................................................................................................ 9
Figure 4.1. VCCTP Test Point for VCC Noise Tolerance ....................................................................................................... 14
Figure 4.2. IDCK Clock Duty Cycle ....................................................................................................................................... 19
Figure 4.3. Control and Data Single-Edge Setup and Hold Times—EDGE = 1 ..................................................................... 19
Figure 4.4. Control and Data Single-Edge Setup and Hold Times—EDGE = 0 ..................................................................... 19
Figure 4.5. Control and Data Dual-Edge Setup and Hold Times ......................................................................................... 19
Figure 4.6. VSYNC and HSYNC Delay Times Based on DE ................................................................................................... 20
Figure 4.7. DE HIGH and LOW Times .................................................................................................................................. 20
Figure 4.8. Conditions for Use of RESET# ............................................................................................................................ 20
Figure 4.9. RESET# Minimum Timings................................................................................................................................. 20
Figure 4.10. Differential Transition Times .......................................................................................................................... 20
Figure 4.11. I2S Input Timings ............................................................................................................................................. 21
Figure 4.12. S/PDIF Input Timings ....................................................................................................................................... 21
Figure 4.13. MCLK Timings .................................................................................................................................................. 21
Figure 4.14. DSD Input Timings ........................................................................................................................................... 21
Figure 4.15. I2C Data Valid Delay (Driving Read Cycle Data) ............................................................................................... 21
Figure 5.1. Pin Diagram ....................................................................................................................................................... 22
Figure 6.1. High Speed Data Transmission .......................................................................................................................... 29
Figure 6.2. High Bitrate Stream Before and After Reassembly and Splitting ...................................................................... 29
Figure 6.3. High Bitrate Stream After Splitting ................................................................................................................... 29
Figure 6.4. Simplified Host I2C Interface Using Master DDC Port ....................................................................................... 30
Figure 6.5. Master I2C Supported Transactions .................................................................................................................. 30
Figure 6.6. Controller Connections Schematic .................................................................................................................... 32
Figure 6.7. 8-Bit Color Depth RGB/YCbCr/xvYCC 4:4:4 Timing ........................................................................................... 35
Figure 6.8. 10-Bit Color Depth RGB/YCbCr/xvYCC 4:4:4 Timing ......................................................................................... 35
Figure 6.9. 12-Bit Color Depth RGB/YCbCr/xvYCC 4:4:4 Timing ......................................................................................... 35
Figure 6.10. 8-Bit Color Depth YC 4:2:2 Timing .................................................................................................................. 37
Figure 6.11. 10-Bit Color Depth YC 4:2:2 Timing................................................................................................................. 37
Figure 6.12. 12-Bit Color Depth YC 4:2:2 Timing................................................................................................................. 37
Figure 6.13. 8-Bit Color Depth YC 4:2:2 Embedded Sync Timing ........................................................................................ 39
Figure 6.14. 10-Bit Color Depth YC 4:2:2 Embedded Sync Timing ...................................................................................... 39
Figure 6.15. 12-Bit Color Depth YC 4:2:2 Embedded Sync Timing ...................................................................................... 39
Figure 6.16. 8-Bit Color Depth YC Mux 4:2:2 Timing .......................................................................................................... 40
Figure 6.17. 10-Bit Color Depth YC Mux 4:2:2 Timing ........................................................................................................ 41
Figure 6.18. 12-Bit Color Depth YC Mux 4:2:2 Timing ........................................................................................................ 41
Figure 6.19. 8-Bit Color Depth YC Mux 4:2:2 Embedded Sync Timing ................................................................................ 42
Figure 6.20. 10-Bit Color Depth YC Mux 4:2:2 Embedded Sync Timing .............................................................................. 43
Figure 6.21. 12-Bit Color Depth YC Mux 4:2:2 Embedded Sync Timing .............................................................................. 43
Figure 6.22. 8-Bit Color Depth 4:4:4 Dual Edge Timing ...................................................................................................... 45
Figure 6.23. 10-Bit Color Depth 4:4:4 Dual Edge Timing .................................................................................................... 45
Figure 6.24. 12-Bit Color Depth 4:4:4 Dual Edge Timing .................................................................................................... 45
Figure 6.25. 16-Bit Color Depth 4:4:4 Dual Edge Timing .................................................................................................... 46
Figure 7.1. Decoupling and Bypass Schematic .................................................................................................................... 47
Figure 7.2. Decoupling and Bypass Capacitor Placement ................................................................................................... 47
Figure 8.1. 100-Pin Package Diagram ................................................................................................................................. 50
Figure 8.2. Marking Diagram .............................................................................................................................................. 51
Figure 8.3. Alternate Topside Marking ............................................................................................................................... 51

4 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

Tables
Table 2.1. Product Selection Guide ...................................................................................................................................... 8
Table 4.1. Absolute Maximum Conditions .......................................................................................................................... 14
Table 4.2. Normal Operating Conditions ............................................................................................................................ 14
Table 4.3. DC Digital I/O Specifications............................................................................................................................... 15
Table 4.4. TMDS I/O Specifications ..................................................................................................................................... 15
Table 4.5. DC Specifications ................................................................................................................................................ 16
Table 4.6. Video Input AC Specifications ............................................................................................................................ 16
Table 4.7. TMDS AC Output Specifications ......................................................................................................................... 16
Table 4.8. S/PDIF Input Port Timings .................................................................................................................................. 17
Table 4.9. I2S Input Port Timings ......................................................................................................................................... 17
Table 4.10. DSD Input Port Timings .................................................................................................................................... 17
Table 4.11. Video AC Timing Specifications ........................................................................................................................ 18
Table 4.12. Control Signal Timing Specifications ................................................................................................................ 18
Table 6.1. RGB to YCbCr Conversion Formulas ................................................................................................................... 26
Table 6.2. YCbCr-to-RGB Conversion Formula .................................................................................................................... 26
Table 6.3. Control of the Default I2C Addresses with the CI2CA Pin ................................................................................... 27
Table 6.4. Supported MCLK Frequencies ............................................................................................................................ 28
Table 6.5. Channel Status Bits Used for Word Length ........................................................................................................ 28
Table 6.6. Supported 3D and 4K Video Formats ................................................................................................................. 31
Table 6.7. Video Input Formats .......................................................................................................................................... 33
Table 6.8. RGB/YCbCr 4:4:4 Separate Sync Data Mapping ................................................................................................. 34
Table 6.9. YC 4:2:2 Separate Sync Data Mapping ............................................................................................................... 36
Table 6.10. YC 4:2:2 Embedded Sync Data Mapping .......................................................................................................... 38
Table 6.11. YC Mux 4:2:2 Separate Sync Data Mapping ..................................................................................................... 40
Table 6.12. YC Mux 4:2:2 Embedded Sync Data Mapping .................................................................................................. 42
Table 6.13. RGB/YCbCr 4:4:4 Separate Sync Dual-Edge Data Mapping .............................................................................. 44

SiI-DS-1084-D 5
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

Acronyms in This Document

A list of acronyms used in this document.
Acronym Definition
ACPI Advanced Configuration and Power Interface
CBUS Control Bus
CEC Consumer Electronics Control
CPI CEC Programming Interface
CSC Color Space Converters
DDC Display Data Channel
DSC Display Stream Compression
DVI Digital Visual Interface
EDDC Enhanced Display Data Channel
EDID Extended Display Identification Data
EMI Electromagnetic interference
ESD Electrostatic Discharge
GPIO General Purpose Input/Output
HDCP High-bandwidth Digital Content Protection
HDMI High-Definition Multimedia Interface
HDTV High-Definition Television
HPD Hot Plug Detect
I2C Inter-Integrated Circuit
KSV Key Selection Vector
MCLK Master Clock
SPDIF Sony/Philips Digital Interface Format
TMDS Transition Minimized Differential Signaling
TPI Transmitter Programming Interface
VSIF Vendor Specific InfoFrame

6 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

1. General Description 1.3. HDMI Output

 DVI, HDCP (on SiI9136-3 only), and HDMI
The Lattice Semiconductor SiI9136-3/SiI1136
transmitter with xvYCC extended color gamut,
transmitter is an HDMI® Deep Color transmitter with
Deep Color up to 16-bit color, 3D, and high bitrate
3D and 4K x 2K support for consumer electronics
audio support
products such as set-top boxes, Blu-ray players and
recorders, A/V Receivers, DVD players and recorders,  300 MHz HDMI transmitter
personal video recorders, home theater-in-a-box  Supports all mandatory and some optional 3D
systems, and home theater PCs. Figure 1.1 shows an modes
example of system architecture using the  Preprogrammed HDCP key set (on SiI9136-3 only)
SiI9136-3/SiI1136 device. simplifies the manufacturing process, lowers cost,
The SiI9136-3/SiI1136 transmitter, with the latest and provides the highest level of HDCP key
generation 300 MHz TMDS™ core, enables home security
theater devices to deliver up to 16-bit Deep Color at
1080p/30 resolutions and up to 12-bit Deep Color at 1.4. Control Capability
1080p/60 resolutions. On the audio side, high bitrate
audio formats such as Dolby® TrueHD and DTS-HD are  Consumer Electronics Control (CEC) interface that
supported for an enhanced digital audio experience. incorporates an HDMI-compliant CEC I/O and the
Lattice CEC Programming Interface (CPI) reduces
the need for system-level control by the system
1.1. Video Input microcontroller and simplifies firmware overhead
 Supports most common standard and  Four General Purpose I/O (GPIO) pins
nonstandard video input formats  Three dynamic power management modes as
 Supports most common 3D formats required in the Advanced Configuration and Power
 Supports video resolutions up to 8-bit 4K (30 Hz), Interface (ACPI) Specification, according to system
12-bit 1080p (60 Hz), 12-bit 720p/1080i (120 Hz), needs
and 16-bit 1080p (30 Hz)
1.5. Packaging
1.2. Audio Input  100-pin, 14 mm x 14 mm, 0.5 mm pitch TQFP
 S/PDIF input supports PCM and compressed audio package with ePad
formats (Dolby Digital, DTS, AC-3)
 DSD input supports Super Audio CD applications
(SACD)
 I²S input supports PCM, DVD-Audio input (up to
8-channel 192 kHz)
 High Bitrate audio support such as DTS HD and
Dolby True HD

Figure 1.1. Typical Application for Streaming Sticks

SiI-DS-1084-D 7
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

2. Product Family
Table 2.1 summarizes the differences between the SiI9136-3/SiI1136 transmitter and the SiI9134 transmitter.
Table 2.1. Product Selection Guide
Transmitter SiI9134 SiI9136 SiI9136-3/SiI1136
Video Input
Digital Video Input Ports 1 1 1
I/O Voltage 3.3 V 3.3 V 3.3 V
Core Voltage 1.8 V 1.2 V 1.2 V
Input Pixel Clock Multiply/Divide 0.5x, 2x, 4x 0.5x, 2x, 4x 0.5x, 2x, 4x
Maximum Pixel Input Clock Rate 165 MHz 165 MHz 300 MHz
Maximum TMDS Output Clock 225 MHz 225 MHz 300 MHz
BTA-T1004 Format Support Yes Yes Yes
Video Format Conversion
36-bit and 30-bit Deep Color Yes Yes Yes
48-bit Deep Color No Yes Yes
xvYCC No Yes Yes
YCbCr  RGB CSC Yes Yes Yes
RGB  YCbCr CSC Yes Yes Yes
4:2:2  4:4:4 Upsampling Yes Yes Yes
4:4:4  4:2:2 Decimation Yes Yes Yes
16–235  0–255 Expansion Yes Yes Yes
0–255  16–235 Compression Yes Yes Yes
16–235/240 Clipping Yes Yes Yes
Audio Input
S/PDIF Input Ports 1 1 1
I2S Input Bits 4 (8-channel) 4 (8-channel) 4 (8-channel)
High Bitrate Audio Support
Yes Yes Yes
Compressed DTS-HD and Dolby True-HD
One-bit Audio (DSD/SACD) Yes Yes1 Yes1
192 kHz on I2S 192 kHz on I2S 192 kHz on I2S
2-Channel Maximum Sample Rate
192 kHz on S/PDIF 192 kHz on S/PDIF 192 kHz on S/PDIF
8-Channel Maximum Sample Rate 192 kHz 192 kHz 192 kHz
96 kHz to 48 kHz 96 kHz to 48 kHz 96 kHz to 48 kHz
Down Sampling
192 kHz to 48 kHz 192 kHz to 48 kHz 192 kHz to 48 kHz
Internal MCLK Generator No Yes2 Yes2
I2C Address Bus
Device Address Select CI2CA Pin CI2CA Pin CI2CA Pin
Master DDC Bus Yes Yes Yes
Other
CEC Interface No Yes Yes
xvYCC Gamut Data Yes Yes Yes
3D Support Yes Yes Yes
Programming Interface No Yes Yes
HDCP Reset Software Register Software Register Software Register
Package 100-pin TQFP 100-pin TQFP 100-pin TQFP
Notes:
1. Shared with I2S Input Interface.
2. Internal MCLK generation is ON by default.
3. HDCP Reset does not apply to the SiI1136 transmitter.

8 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

3. Functional Description
Figure 3.1 shows the functional diagram of the SiI9136-3/SiI1136 transmitter. Pin descriptions begin on page 23. A
description of each of the blocks shown in the diagram follows the figure. The power domains are described in the Power
Domains section on page 29.

Note: HDCP blocks do not apply to the SiI1136 transmitter.

CEC
Interface CEC
CSDA I2C Slave
Interface DDC Master DSDA
CSCL Configuration I2C Interface
Logic and DSCL
Registers
CI2CA
INT
RESET# Hot Plug Detect Hot-Plug
Detector HPD
Receiver Sense
and Interrupt Logic
GPIO GPIO[3:0]

IDCK
D[35:0]
Video Data Input
HSYNC
and Conversion
VSYNC EXT_SWING
DE
HDCP HDCP TXC±
ROM Encryption TMDS
SPDIF_IN TX0±
Engine Transmitter
MCLK TX1±

SCK TX2±
Audio Data XOR
WS Capture Framer Mask
SD[3:0]
DL[3],DR[3]

Figure 3.1. SiI9136-3/SiI1136 Functional Block Diagram

3.1. Video Data Input and Conversion

Figure 3.2 shows the video data processing stages through the transmitter. Each of the processing blocks can be
bypassed by setting the appropriate register bits. The HSYNC and VSYNC input signals are required, except in
embedded sync modes. The DE input signal is optional, because it can be created with the DE generator using the
HSYNC and VSYNC signals.

Input
Clock
IDCK Clock
Multiplier/
Divider Data

YCbCr to
Embedded DE HSYNC, 4:2:2 to 4:4:4
D[35:0] Combiner RGB Color
Sync Decoder VSYNC Upsampler
Space Converter
Video
Data
Capture HSYNC,
DE bypass 422 bypass CSC
VSYNC
Data
Enable
HSYNC
Generator
VSYNC DE can be explicit input,
decoded from embedded
syncs, or generated from
DE external DE
Hsync and Vsync edges.

RGB RGB to RGB/YCbCr Dither

4:4:4 to 4:2:2
Range YCbCr Color Range Clipping 18 to To HDCP XOR Mask
Downsampler
Expansion Space Converter Compression 8/10/12/16

bypass Expansion bypass CSC bypass Compression bypass 444 bypass Clipping bypass Dither

Figure 3.2. Transmitter Video Data Processing Path

SiI-DS-1084-D 9
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

3.1.1. Input Clock Multiplier/Divider

The input pixel clock can be multiplied by 0.5, 2, or 4. Video input formats that use a 2x clock, such as YC Mux mode,
can be transmitted across the HDMI link with a 1x clock. Similarly, 1x-to-2x, 1x-to-4x, and 2x-to-4x conversions are
possible.

3.1.2. Video Data Capture

The bus configurations support most standardized video input formats as well as other widely used non-standard
formats. Each configuration has four key attributes: data width, input mode, clock mode, and synchronization.
The video input port is a 36-bit wide bus that can be configured to any of the following data widths:
 8-, 10-, or 12-bit input in double speed clock mode
 12-, 15-, 18-, or 24-bit input in dual edge clock mode
 16-, 20-, 24-, 30-, or 36-input in single speed clock mode
The input mode includes color format such as RGB, YCbCr, or xvYCC, and color sampling such as 4:4:4 or 4:2:2.
Clock mode refers to the input clock rate relative to the pixel clock rate. The SiI9136-3/SiI1136 device supports 1x mode
and 2x mode, or dual edge mode. 1x mode and 2x mode means that the input clock operates at one or two times the
pixel clock rate. Dual edge mode means that the input clock rate equals the pixel clock rate, but a sample is captured
on both the rising edge and the falling edge of the input clock. Thus, with the Video Input configured for 24 bits with a
dual edge clock, 48 bits of video data are received per clock cycle. The 24 MSBs of the video data are latched on the
first clock edge, and the 24 LSBs are latched on the next clock edge. The first clock edge is programmable and can be
either the rising or falling edge.
Synchronization attributes refer to how the horizontal and vertical sync signals are configured. Separate
synchronization involves placing the horizontal sync, vertical sync, and data enable signals on separate input pins.
Embedded synchronization combines these signals with one or more of the data inputs.

3.1.3. Embedded Sync Decoder

The transmitter can create DE, HSYNC, and VSYNC signals using the Start of Active Video (SAV) and End of Active Video
(EAV) codes within the ITU-R BT.656-format video stream.

3.1.4. Data Enable Generator

The transmitter includes logic to construct a Data Enable (DE) signal from the incoming HSYNC, VSYNC, and IDCK. This
signal is used to correct timing from sync extraction to conform to CEA-861D timing specifications. By programming
registers, the DE signal can define the size of the active display region. This feature is particularly useful when the
transmitter connects to MPEG decoders that do not provide a specific DE output signal.

3.1.5. Combiner
The clock, data, and sync information is combined into a complete set of signals required for TMDS encoding. From
here, the signals are manipulated by the register-selected video processing blocks.

3.1.6. 4:2:2 to 4:4:4 Upsampler

Chrominance upsampling doubles the number of chrominance samples per line, converting 4:2:2 sampled video to
4:4:4.

3.1.7. RGB Range Expansion

The SiI9136-3/SiI1136 transmitter can scale the input color range from limited-range into full-range using the range
expansion block. When enabled by itself, the range expansion block expands 16–235 (64–943 to 256–3775, 4096-
60415 for 30/36/48-bit color depth) limited-range data into 0–255 (0–1023, 0–4095 to 0-65535 for 30/36/48-bit color
depth) full-range data for each video channel. When range expansion and the YCbCr to RGB color space converter are
both enabled, the input conversion range for the Cb and Cr channels is 16–240 (64–963, 256–3855 to 4096-61695 for
30/36/48-bit color depth).

10 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

3.1.8. Color Space Converter

Two Color Space Converters (CSCs) (YCbCr to RGB and RGB to YCbCr) are available to interface to the many video
formats supplied by A/V processors and to provide full DVI backward compatibility. The CSC can be adjusted to perform
standard-definition conversions (ITU.601) or high-definition conversions (ITU.709) by setting the appropriate registers.

3.1.9. RGB/YCbCr Range Compression

When enabled by itself, the range compression block compresses 0–255/0–1023/0–4095/0–65535 full-range data into
16–235/64–943/256–3775/4096–60415 limited-range data for each video channel. When enabled with the RGB to
YCbCr converter, this block compresses to 16–240/64–963/256–3855/4096–61695 for the Cb and Cr channels. The
color range scaling is linear.

3.1.10. 4:4:4 to 4:2:2 Downsampler

Downsampling reduces the number of chrominance samples per line by half, converting 4:4:4 sampled video to 4:2:2.

3.1.11. Clipping
The clipping block, when enabled, clips the values of the output video to 16–235 for RGB video or the Y channel, and to
16–240 for the Cb and Cr channels.

3.1.12. 18-to-8/10/12/16-Dither
The 18-to-8/10/12/16-dither block dithers internally processed, 18-bit data to 8, 10, 12, or 16 bits for output on the
HDMI link. It can be bypassed to output 10/12-bit modes when supplied by the A/V processor or converted in the
decimator and CSC.

3.2. Audio Data Capture

The audio capture block supports I2S, Direct Stream Digital, and S/PDIF audio input formats. The appropriate registers
must be configured to describe the audio format provided to the SiI9136-3/SiI1136 transmitter. This information is
passed over the HDMI link in the CEA-861D Audio Info (AI) packets.

3.3. Framer
The framer block handles the packetizing and framing of the data stream sent across the HDMI link. Audio and video
data packets are inserted into the respective HDMI Video Data and Data Island periods. This block handles the correct
insertion of all HDMI packet types.

3.4. HDCP Encryption Engine/XOR Mask

The HDCP encryption engine contains the logic necessary to encrypt the incoming audio and video data and includes
support for HDCP authentication and repeater checks. The system microcontroller or microprocessor controls the
encryption process by using a set sequence of register reads and writes. An algorithm uses HDCP keys and a Key
Selection Vector (KSV) stored in the HDCP key ROM to calculate a number that is then applied to an XOR mask. This
process encrypts the audio and video data on a pixel-by-pixel basis during each clock cycle. The HDCP encryption
engine/XOR mask does not apply to the SiI1136 transmitter.

SiI-DS-1084-D 11
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

3.5. HDCP Key ROM

The SiI9136-3/SiI1136 transmitter comes preprogrammed with a set of production HDCP keys stored in an internal
ROM. System manufacturers do not need to purchase key sets from the Digital-Content Protection LLC. Lattice
Semiconductor handles all purchasing, programming, and security for the HDCP keys. The preprogrammed HDCP keys
provide the highest level of security because there is no way to read the keys once the device is programmed.
Customers must sign the HDCP license agreement (www.digital-cp.com) or be under a specific NDA with Lattice
Semiconductor before receiving SiI9136-3/SiI1136 samples.
The SiI1136 transmitter is functionally equivalent to the SiI9136-3 except the HDCP keys are not preprogrammed and
therefore does not support HDCP encryption.

3.6. TMDS Transmitter

The TMDS digital core performs 8-to-10-bit TMDS encoding on the data received from the HDCP XOR mask, and is then
sent over three TMDS data and a TMDS clock differential lines. A resistor connected to the EXT_SWING pin controls the
swing amplitude of the TMDS signal.

3.7. GPIO
The SiI9136-3/SiI1136 transmitter has four General Purpose I/O pins. Each pin supports the following functions:
 Input mode: The value can be read through local I2C bus access; an interrupt can be generated on either the falling
or the rising edge of the input signal.
 Output mode: The value can be set through the local I2C bus access.

3.8. Hot Plug Detector

When HIGH, the Hot Plug Detection signal indicates to the transmitter that the EDID of the connected receiver is
readable. A HIGH voltage is at least 2.0 V, and a LOW voltage is less than 0.8 V.

3.9. CEC Interface

The Consumer Electronics Control (CEC) Interface block provides CEC-compliant signals between CEC devices and a CEC
master. A CEC controller compatible with the Lattice Semiconductor CEC API is included on-chip. The controller has a
high-level register interface accessible through the I2C interface, and can be used to send and receive CEC commands.
This controller makes CEC control easy and straightforward by removing the burden of programming the host
processor to perform these low-level transactions on the CEC bus. See the CEC Programming Interface (CPI)
Programmer Reference for details on the API (see the Lattice Semiconductor Documents section on page 52). The
Programmer’s Reference requires an NDA with Lattice Semiconductor.

3.10. DDC Master I2C Interface

The host uses the DDC master logic to read the EDID by programming the target address, offset, and number of bytes.
Upon completion, or when the DDC master FIFO becomes full, an interrupt signal is sent to the host so that the host
can read data out of the FIFO.
The TPI hardware uses the DDC master logic to carry out HDCP authentication tasks. The arbitration logic arbitrates the
access from host and the internal TPI hardware. See the Internal DDC Master section on page 30 for more information.

12 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

3.11. Receiver Sense and Interrupt Logic

The Interrupt logic of this block buffers interrupt events from different sources. Receiver Sense and Hot Plug Interrupts
are also available in power down mode. The logic for handling these interrupts when all clocks are disabled is also part
of this block. The INT pin provides an interrupt signal to the system microcontroller when any of the following occur:
 Monitor Detect (either from the HPD input level or from the Receiver Sense feature) changes
 VSYNC (useful for synchronizing a microcontroller to the vertical timing interval)
 Error in the audio format
 DDC FIFO status change
 HDCP authentication error.

3.12. Configuration Logic and Registers

This block contains the configuration registers that control the operation of the transmitter. The registers are accessed
via the I2C interface. This block also contains logic for simplifying the configuration of the transmitter by automatically
programming different parameters.

3.13. I2C Slave Interface

The controller I2C interface on the transmitter (signals CSCL and CSDA) is a slave interface with an operating frequency
from 3 kHz to 400 kHz and with an input tolerance of up to 4.0 V when all device operating voltages are present. The
host uses this interface to configure the transmitter by reading from and writing to appropriate registers.

SiI-DS-1084-D 13
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

4. Electrical Specifications
4.1. Absolute Maximum Conditions
Table 4.1. Absolute Maximum Conditions
Symbol Parameter Min Typ Max Units Note
IOVCC33 I/O Pin Supply Voltage –0.3 — 4.0 V 2
CVCC12 Digital Core Supply Voltage –0.5 — 1.5 V 2
AVCC Analog Supply Voltage 1.2 V –0.5 — 1.5 V 2
VI Input Voltage –0.3 — IOVCC + 0.3 V —
VO Output Voltage –0.3 — IOVCC + 0.3 V —
TJ Junction Temperature — — 125 C —
TSTG Storage Temperature –65 — 150 C —
Notes:
1. Permanent device damage can occur if absolute maximum conditions are exceeded.
2. Functional operation should be restricted to the conditions described in the Normal Operating Conditions section.

4.2. Normal Operating Conditions

Table 4.2. Normal Operating Conditions
Symbol Parameter Min Typ Max Units Note
IOVCC33 I/O Pin Supply Voltage 3.135 3.3 3.465 V —
CVCC12 Digital Core Supply Voltage 1.14 1.2 1.26 V —
AVCC Analog Supply Voltage, 1.2 V 1.14 1.2 1.26 V —
VCCN Supply Voltage Noise Tolerance — — 100 mVP-P *
TA Ambient Temperature (with power applied) 0 25 70 C —
ja Thermal Resistance (Theta JA) — — 29.3 C/W —
jc Junction to case resistance (Theta JC) — — 12.8 C/W —
*Note: The supply voltage noise is measured at test point VCCTP. See Figure 4.1. The ferrite bead provides filtering of power supply
noise. The figure is representative and applies to the IOVCC33, CVCC12, and AVCC pins.

VCCTP

Ferrite
VCC

SiI9136-3/
0.1 F 0.1 F 1 nF SiI1136
10 F

GND

Figure 4.1. VCCTP Test Point for VCC Noise Tolerance

14 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

4.2.1. I/O Specifications

Under normal operating conditions unless otherwise specified.
Table 4.3. DC Digital I/O Specifications
Symbol Parameter Signal Type Conditions Min Typ Max Units
VIH HIGH-level Input Voltage* 2.0 — 5.5 V
LVTTL —
VIL LOW-level Input Voltage* –0.3 — 0.8 V
VTH+ LOW to HIGH Threshold 1.9 — — V
Schmitt RESET#, CSCL, CSDA
VTH- HIGH to LOW Threshold — — 0.7 V
VTH+ LOW to HIGH Threshold 3.0 — — V
Schmitt DSCL, DSDA
VTH- HIGH to LOW Threshold — — 1.5 V
VTH+ LOW to HIGH Threshold 2.0 — — V
Schmitt CEC_A
VTH- HIGH to LOW Threshold — — 0.8 V
VOH HIGH-level Output Voltage 2.4 — — V
LVTTL —
VOL LOW-level Output Voltage — — 0.4 V
High Impedance Output Leakage
IOZ — @ VO = 3.3 V or 0 V –10 — 10 A
Current
IOH HIGH level Output Current — @ VOH {Min} — — 8 mA
IOL LOW level Output Current — @ VOL {Max} — — 8 mA
*Note: All unused input signals should be tied LOW.

Table 4.4. TMDS I/O Specifications

Signal
Symbol Parameter Conditions Min Typ Max Units
Type
RLOAD = 50 Ω
Differential outputs:
REXT_SWING as defined in
VOD single-ended swing TMDS 400 500 600 mV
the Pin Descriptions
amplitude*
section
Differential outputs:
VODD differential swing TMDS — 800 1000 1200 mV
amplitude
Differential HIGH level ≤ 165 MHz TMDS clock AVCC – 10 mV — AVCC + 10 mV V
VDOH TMDS
output voltage > 165 MHz TMDS clock AVCC – 200 mV — AVCC + 10 mV V
Differential LOW level ≤ 165 MHz TMDS clock AVCC – 600 mV — AVCC – 400 mV V
VDOL TMDS
output voltage > 165 MHz TMDS clock AVCC – 700 mV — AVCC – 400 mV V
Differential output
IDOS TMDS VOUT = 0 V — — 5 μA
short circuit current
*Note: Single-ended swing amplitude limits are defined by the HDMI Specification.

SiI-DS-1084-D 15
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

4.2.2. DC Power Supply Specifications

Table 4.5 shows the power consumption in the three power modes. Measurement uses Dot Moiré pattern with
8-chanel I2S audio and HDCP enabled.
Table 4.5. DC Specifications
IOVCC33 AVCC CVCC12
Symbol Parameter Mode Frequency1 Units
Typ Max Typ Max Typ Max
74.25 MHz 1.8 1.7 10.9 12.2 36.3 40.0 mA
148.5 MHz 3.6 3.1 18.2 20.3 68.4 75.6 mA
IPON Power On Current D0
225 MHz 4.7 3.8 25.4 28.3 83.9 92.9 mA
297 MHz 3.82 3.22 33.1 37.3 94.9 105.2 mA
IPSTBY Power Standby Current D2 — 4.70 0.50 9.10 mA
IPOFF Power Off current D3 — 4.70 0.50 5.10 mA
Notes:
1. TMDS clock frequency does not matter in D3 and D2 modes.
2. Current measurement for IOVCC33 is lower at 297 MHz since only 24-bits per pixel is used. At 225 MHz used for deep color,
each pixel is 36-bits wide.

4.3. AC Specifications
4.3.1. Video/HDMI Timing Specifications
Under normal operating conditions unless otherwise specified.
Table 4.6. Video Input AC Specifications
Symbol Parameter Conditions Min Typ Max Units Figure
VSYNC and HSYNC Delay from DE falling
TDDF — 1 — — TCIP Figure 4.6
edge
TDDR VSYNC and HSYNC Delay to DE rising edge — 1 — — TCIP Figure 4.6
THDE DE HIGH Time — — — 8191 TCIP Figure 4.7
TLDE DE LOW Time — 138* — — TCIP Figure 4.7
*Note: TLDE minimum is defined for HDMI mode carrying 480p video with 192 kHz audio, which requires at least 138 pixel clock
cycles of blanking to carry the audio packets. If only HDCP is running, the minimum DE LOW time is 58 clock cycles, according to the
HDCP Specification. If neither HDCP nor audio are running, the minimum DE LOW time is 12 clock cycles for TMDS. The minimum
vertical blanking time is three horizontal line times.

Table 4.7. TMDS AC Output Specifications

Symbol Parameter Conditions Min Typ Max Units Figure
REXT_SWING = 3.83 kΩ
Differential Swing LOW-to-HIGH
SLHT Internal Source 95.5 — 181.81 ps Figure 4.10
Transition Time
Termination On
REXT_SWING = 3.83 kΩ
Differential Swing HIGH-to-LOW
SHLT Internal Source 86.5 — 172.3 ps Figure 4.10
Transition Time
Termination On
Notes:
1. These limits are defined by the HDMI Specification.
2. Refer to the Source Termination section on page 31 for information about internal source termination.

16 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

4.3.2. Audio AC Timing Specifications

Table 4.8. S/PDIF Input Port Timings
Symbol Parameter Conditions Min Typ Max Units Figure Notes
FS_SPDIF Sample Rate 2 Channel 32 — 192 kHz — —
TSPCYC S/PDIF Cycle Time CL = 10 pF — — 1.0 UI Figure 4.12 1
TSPDUTY S/PDIF Duty Cycle CL = 10 pF 90% — 110% UI Figure 4.12 1
TMCLKCYC MCLK Cycle Time CL = 10 pF 13.3 — — ns Figure 4.13 3
FMCLK MCLK Frequency CL = 10 pF — — 75 MHz — 3
TMCLKDUTY MCLK Duty Cycle CL = 10 pF 40% — 60% TMCLKCYC Figure 4.13 3
TAUDDLY Audio Pipeline Delay — — 30 70 s — 4
Note: Refer to the notes for Table 4.10.
Table 4.9. I2S Input Port Timings
Symbol Parameter Conditions Min Typ Max Units Figure Notes
FS_I2S Sample Rate — 32 — 192 kHz — —
TSCKCYC I2S Cycle Time CL = 10 pF — — 1.0 UI Figure 4.11 1
TSCKDUTY I2S Duty Cycle CL = 10 pF 90% — 110% UI Figure 4.11 —
TI2SSU I2S Setup Time CL = 10 pF 15 — — ns Figure 4.11 2
TI2SHD I2S Hold Time CL = 10 pF 0 — — ns Figure 4.11 2
Note: Refer to the notes for Table 4.10.

Table 4.10. DSD Input Port Timings

Symbol Parameter Conditions Min Typ Max Units Figure Notes
FS_DSD Sample Rate — — 44.1 88.2 kHz — —
TDCKCYC DSD Cycle Time CL = 10 pF — — 2.0 UI Figure 4.14 1
TDCKDUTY DSD Duty Cycle CL = 10 pF 90% — 110% UI Figure 4.14 1
TDSDSU DSD Setup Time CL = 10 pF 20 — — ns Figure 4.14 —
TDSDHD DSD Hold Time CL = 10 pF 20 — — ns Figure 4.14 —
Notes:
1. Proportional to unit time (UI) according to sample rate. Refer to the I2S, S/PDIF, or DSD Specifications.
2. Setup and hold minimum times are based on 13.388 MHz sampling, which is adapted from Figure 3 of the Philips I2S
Specification.
3. If a separate master clock input (MCLK) is used for time-stamping purposes, it has to be coherent with the audio input.
Coherent means that the MCLK and audio input have been created from the same clock source. This requirement usually uses
the original MCLK to strobe the audio out from the sourcing chip.
4. Audio pipeline delay is measured from the transmitter input pins to the TMDS output.

SiI-DS-1084-D 17
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

4.3.3. Video AC Timing Specifications

Under normal operating conditions unless otherwise specified.
Table 4.11. Video AC Timing Specifications
Symbol Parameter Conditions Min Typ Max Units Figure Notes
TCIP IDCK period, one pixel per clock — 3.3 — 40 ns Figure 4.2 1
FCIP IDCK frequency, one pixel per clock — 25 — 300 MHz — 1
TCIP12 IDCK period, dual-edge clock — 12.3 — 40 ns Figure 4.2 2
FCIP12 IDCK frequency, dual-edge clock — 25 — 82.5 MHz — 2
TDUTY IDCK duty cycle — 45% — 55% TCIP Figure 4.2 —
Worst case IDCK clock jitter, DJ — — — 0.20 TBIT —
TIJIT 3, 4
Worst case IDCK clock jitter, RJ — — — 0.25 TBIT —
TSIDF Setup time to IDCK falling edge 1.36 — — ns
EDGE = 0 Figure 4.4 5
THIDF Hold time to IDCK falling edge 0.45 — — ns
TSIDR Setup time to IDCK rising edge 1.57 — — ns
EDGE = 1 Figure 4.3 5
THIDR Hold time to IDCK rising edge 1.16 — — ns
TSIDD Setup time to IDCK rising or falling edge Dual-edge 1.57 — — ns
Figure 4.5 6
THIDD Hold time to IDCK rising or falling edge clocking 1.16 — — ns
Notes:
1. TCIP and FCIP apply in single-edge clocking modes. TCIP is the inverse of FCIP and is not a controlling specification.
2. TCIP12 and FCIP12 apply in dual-edge mode. TCIP12 is the inverse of FCIP12 and is not a controlling specification.
3. TBIT is the TMDS bit time.
4. Total jitter (TJ) is calculated from DJ (deterministic jitter), RJ (random jitter, rms) and required BER (Bit Error Rate). For BER of
1E-9, TJ = DJ + 12 • RJ = 3.2 TBIT.
5. Setup and hold time specifications apply to Data, DE, VSYNC, and HSYNC input pins, relative to IDCK input clock.
6. Setup and hold limits are not affected by the setting of the EDGE bit for 12/15/18/24-bit dual-edge clocking mode.

4.3.4. Control Signal Timing Specifications

Under normal operating conditions unless otherwise specified.
Table 4.12. Control Signal Timing Specifications
Symbol Parameter Conditions Min Typ Max Units Figure Note
Figure 4.8
TRESET RESET# signal LOW time required for reset — 50 — — µs 1, 5
Figure 4.9
SDA Data Valid Delay from SCL falling edge
TI2CDVD CL = 400pF — — 700 ns Figure 4.15 2, 6
on READ command
THDDAT I2C data hold time 0–400 kHz 2.0 — — ns — 3, 6
Response time for INT output pin from
TINT change in input condition (HPD, Receiver RESET# = HIGH — — 100 µs — —
Sense, VSYNC change, etc.).
FSCL Frequency on master DDC SCL signal — 40 70 100 kHz — 4
FCSCL Frequency on master CSCL signal — 40 — 400 kHz — —
Notes:
1. Reset on RESET# signal can be LOW as the supply becomes stable (shown in Figure 4.8), or pulled LOW for at least TRESET (shown
in Figure 4.9).
2. All standard-mode (100 kHz) I2C timing requirements are guaranteed by design. These timings apply to the slave I2C port (pins
CSDA and CSCL) and to the master I2C port (pins DSDA and DSCL).
3. This minimum hold time is required by CSCL and CSDA signals as an I2C slave. The device does not include the 300 ns internal
delay required by the I2C Specification (Version 2.1, Table 5, note 2).
4. The master DDC block provides an SCL signal for the E-DDC bus. The HDMI Specification limits this to I2C Standard Mode or 100
kHz. Use of the Master DDC block does not require an active IDCK.
5. Not a Schmitt trigger.
6. Operation of I2C pins above 100 kHz is defined by LVTTL levels VIH, VIL, VOH, and VOL (see Table 4.3 on page 15). For these levels,
I2C speeds up to 400 kHz are supported.

18 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

4.3.5. CEC Timing Specifications

See the HDMI 1.4 Specification – Supplement 1 Consumer Electronics Control (CEC).

4.4. Timing Diagrams

4.4.1. Input Timing Diagrams

TCIP/TCIP12

50% 50% 50%

TDUTY

Figure 4.2. IDCK Clock Duty Cycle

TCIP

IDCK 50 % 50 %

TSIDR THIDR

D[23:0], DE, no change allowed

50 % 50 %
HSYNC,VSYNC

Signals may change only in the unshaded portion of the waveform, to meet both the
minimum setup and minimum hold time specifications.

Figure 4.3. Control and Data Single-Edge Setup and Hold Times—EDGE = 1

IDCK 50 % 50 %

TSIDF THIDF

D[23:0], DE, no change allowed

50 % 50 %
HSYNC,VSYNC

Signals may change only in the unshaded portion of the waveform, to meet both the
minimum setup and minimum hold time specifications.

Figure 4.4. Control and Data Single-Edge Setup and Hold Times—EDGE = 0

TCIP12

IDCK 50 % 50 %

TSIDD THIDD TSIDD THIDD

D[11:0], DE, no change no change

50 % 50 % 50 %
HSYNC,VSYNC allowed allowed

Signals may change only in the unshaded portion of the waveform, to meet both the
minimum setup and minimum hold time specifications.

Figure 4.5. Control and Data Dual-Edge Setup and Hold Times

SiI-DS-1084-D 19
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

DE 50% 50%

TDDF TDDR
VSYNC, HSYNC
50% 50%

Figure 4.6. VSYNC and HSYNC Delay Times Based on DE

THDE

DE 2.0 V 2.0 V
0.8 V 0.8 V
TLDE

Figure 4.7. DE HIGH and LOW Times

4.4.2. Reset Timing Diagrams

VCC must be stable between its limits listed in the Normal Operating Conditions section on page 14 for TRESET before RESET# goes
HIGH, as shown in Figure 4.8. Before accessing registers, RESET# must be pulled LOW for TRESET. This can be done by holding RESET#
LOW until TRESET after stable power, as described above, or by pulling RESET# LOW from a HIGH state for at least T RESET, as shown in
Figure 4.9.

VCCmax

VCCmin

VCC

RESET#
TRESET

Figure 4.8. Conditions for Use of RESET#

RESET#
TRESET

Figure 4.9. RESET# Minimum Timings

4.4.3. TMDS Timing Diagram

SLHT SHLT

80% VOD

20% VOD

Figure 4.10. Differential Transition Times

20 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

4.4.4. Audio Timing Diagrams

TSCKCYC

TSCKDUTY

SCK 50 % 50 %

TI2SSU TI2SHD

SD[0:3], WS no change allowed

50 % 50 %

Figure 4.11. I2S Input Timings

TSPCYC

T SPDUTY

50%

SPDIF

Figure 4.12. S/PDIF Input Timings

TMCLKCYC

MCLK 50% 50%

TMCLKDUTY

Figure 4.13. MCLK Timings

TDCKCYC

TDCKDUTY

DCLK 50 % 50 %

TDSDSU TDSDHD

DL[3:0], DR[3:0] no change allowed

50 % 50 %

Figure 4.14. DSD Input Timings

4.4.5. I2C Timing Diagrams

CSDA, DSDA
TI2CDVD

CSCL, DSCL

Figure 4.15. I2C Data Valid Delay (Driving Read Cycle Data)

SiI-DS-1084-D 21
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

5. Pin Diagram and Descriptions

5.1. Pin Diagram

Figure 5.1 shows the pin diagram for the SiI9136-3/SiI1136 transmitter. A description of the pin functions begins on the
next page.

EXT_SWING
AVCC
AVCC
TX2+

TX1+

TX0+

TXC+

GND
TXC-
TX2-

TX1-

TX0-
NC

NC
75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51

HPD 76 50 NC
GPIO1 77 49 GPIO3
D35 78 48 GND

D34 79 47 RESET#

D33 80 46 INT
D32 81 45 CSCL
D31 82 44 CSDA

D30 83 43 CI2CA

D29 84 42 DSCL
D28 85 41 DSDA

D27 86 40 CEC_A

D26 87 SiI9136-3/SiI1136
SiI9136-3 39 GPIO2
CVCC12 88 (Top
(TopView)
View) 38 CVCC12
D25 89 37 IOVCC33

D24 90 36 MCLK

IOVCC33 91 35 SCK
ePad (GND)
D23 92 34 WS_DR0
D22 93 33 SD0_DL0

D21 94 32 SD1_DR1

D20 95 31 SD2_DL1

D19 96 30 SD3_DR2
D18 97 29 SPDIF_IN_DL2
D17 98 28 DR3
D16 99 27 DL3
GND 100 26 GPIO0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
CVCC12

CVCC12

HSYNC
D9

DE
IOVCC33
D15

D14

D13

D12

D11

D10
IOVCC33

VSYNC
IDCK
CVCC12

Figure 5.1. Pin Diagram

22 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

5.2. Pin Descriptions

5.2.1. Video Data Input
Name Pin Type Dir Description
D0 20
D1 19
D2 18
D3 17
D4 15
D5 14
D6 13
D7 11
D8 10
D9 9
D10 8
D11 7
D12 6
D13 4
D14 3
D15 2
D16 99 Video Data Inputs.
D17 98 The video data inputs can be configured to support a wide variety of input
LVTTL
Input formats, including multiple RGB and YCbCr bus formats, using the VID_CONFIG
D18 97 5 V tolerant
registers.
D19 96 See the Common Video Input Formats section on page 33 for details.
D20 95
D21 94
D22 93
D23 92
D24 90
D25 89
D26 87
D27 86
D28 85
D29 84
D30 83
D31 82
D32 81
D33 80
D34 79
D35 78
LVTTL Input Data Clock.
IDCK 22 Input
5 V tolerant Input configurable using the VID_CONFIG registers.
Data Enable.
LVTTL
DE 25 Input This signal is HIGH when the transmitter input pixel data is valid and LOW
5 V tolerant
otherwise. DE is optional for some input formats, such as ITU-R BT.656.
LVTTL Horizontal Sync input control signal.
HSYNC 24 Input
5 V tolerant HSYNC is optional for some input formats, such as ITU-R BT.656.
LVTTL Vertical Sync input control signal.
VSYNC 23 Input
5 V tolerant VSYNC is optional for some input formats, such as ITU-R BT.656.

SiI-DS-1084-D 23
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

5.2.2. TMDS Output

Name Pin Type Dir Description
TX0+ 58
TX0- 57
TX1+ 60 HDMI Transmitter Output Port Data.
TMDS Output
TX1- 59 TMDS low voltage differential signal output data pairs.
TX2+ 63
TX2- 62
TXC+ 55 HDMI Transmitter Output Port Clock.
TMDS Output
TXC- 54 TMDS low voltage differential signal output clock pair.
External Swing Voltage Control.
Input Recommended values (actual value depends on board design):
EXT_SWING 52 Analog
Output  5.6 k resistor to ground without using internal termination.
 4.02 k resistor to ground using internal termination.

5.2.3. Audio Input

Description
Name Pin Type Dir
I2S Mode; S/PDIF Mode DSD Mode
LVTTL
MCLK 36 Input Audio Input Master Clock. —
5 V tolerant
LVTTL
SCK 35 Input I2S Serial Clock. DSD Clock.
5 V tolerant
LVTTL
WS_DR0 34 Input I2S Word Select. DSD Data Right Bit 0.
5 V tolerant
LVTTL
SD0_DL0 33 Input I2S Data 0. DSD Data Left Bit 0.
5 V tolerant
LVTTL
SD1_DR1 32 Input I2S Data 1. DSD Data Right Bit 1.
5 V tolerant
LVTTL
SD2_DL1 31 Input I2S Data 2. DSD Data Left Bit 1.
5 V tolerant
LVTTL
SD3_DR2 30 Input I2S Data 3. DSD Data Right Bit 2.
5 V tolerant
LVTTL
SPDIF_IN_DL2 29 Input S/PDIF Input. DSD Data Left Bit 2.
5 V tolerant
LVTTL
DR3 28 Input — DSD Data Right Bit 3.
5 V tolerant
LVTTL
DL3 27 Input — DSD Data Left Bit 3.
5 V tolerant

24 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

5.2.4. DDC, CEC, Configuration, and Control

Name Pin Type Dir Description
INT 46 LVTTL Output Interrupt Output.
Reset signal.
RESET# 47 Schmitt Input
Active LOW asynchronous reset input for entire chip.
HPD 76 LVTTL Input Hot Plug Detect.
Input
GPIO0 26 LVTTL General Purpose I/O Data 0.
Output
Input
GPIO1 77 LVTTL General Purpose I/O Data 1.
Output
Input
GPIO2 39 LVTTL General Purpose I/O Data 2.
Output
Input
GPIO3 49 LVTTL General Purpose I/O Data 3.
Output
DDC I2C Clock.
Schmitt
Input HDCP KSV, An, and Ri values are exchanged over this I2C port during
DSCL 42 Open drain
Output authentication. True open drain, so does not pull to ground if power not
5 V tolerant
applied.
Schmitt DDC I2C Data.
Input
DSDA 41 Open drain HDCP KSV, An, and Ri values are exchanged over this I2C port during
Output
5 V tolerant authentication. True open drain, it does not pull to ground if power not applied.
LVTTL
CI2CA 43 Input Selects base address group for CSCL/CSDA interface. See Table 6.3 on page 27.
5 V tolerant
Schmitt Local Configuration/Status I2C Clock.
CSCL 45 Input
5 V tolerant Chip configuration/status registers are accessed through this I2C port.
Schmitt
Input Local Configuration/Status I2C Data.
CSDA 44 Open drain
Output Chip configuration/status registers are accessed through this I2C port.
5 V tolerant
HDMI compliant CEC I/O.
CEC Compliant Input As an input, this pin acts as a LVTTL Schmitt-triggered input and is 5 V tolerant.
CEC_A 40
5 V tolerant Output As an output, the pin acts as an NMOS driver with resistive pull-up. This pin has
an internal pull-up resistor.

5.2.5. Power and Ground

Name Pin Type Description Supply
CVCC12 5, 16, 21, 38, 88 Power Digital Core VCC. 1.2 V
IOVCC33 1, 12, 37, 91 Power I/O VCC. 3.3 V
AVCC 56, 61 Power Analog VCC. 1.2 V
GND 48, 53, 100 Ground These pins must be connected to ground. Ground

5.2.6. Not Connected and Reserved

Name Pin Type Description Supply
NC 50, 51, 64–75 Not connected These pins should be left unconnected. None

SiI-DS-1084-D 25
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

6. Feature Information

6.1. RGB to YCbCr Color Space Converter

The RGBYCbCr color space converter can convert from video data RGB to standard definition or to high definition
YCbCr formats. Table 6.1 shows the conversion formulas that are used. The HDMI AVI packet defines the color space of
the incoming video.
Table 6.1. RGB to YCbCr Conversion Formulas
Formulas
Video Format Conversion
CE Mode 16-235 RGB
640 x 480 ITU-R BT.601
480i ITU-R BT.601
576i ITU-R BT.601 Y = 0.299R′ + 0.587G′ + 0.114B′
480p ITU-R BT.601 Cb = –0.172R′ – 0.339G′ + 0.511B′ + 128
576p ITU-R BT.601 Cr = 0.511R′ – 0.428G′ – 0.083B′ + 128
240p ITU-R BT.601
288p ITU-R BT.601
720p ITU-R BT.709 Y = 0.213R′ + 0.715G′ + 0.072B′
1080i ITU-R BT.709 Cb = –0.117R′ – 0.394G′ + 0.511B′ + 128
1080p ITU-R BT.709 Cr = 0.511R′ – 0.464G′ – 0.047B′ + 128

6.2. YCbCr to RGB Color Space Converter

The YCbCrRGB color space converter allows MPEG decoders to interface with RGB-only inputs. The CSC can convert
from YCbCr in standard-definition (ITU.601) or high-definition (ITU.709) to RGB. See the detailed formulas in Table 6.2.
Note the difference between RGB range for CE modes and PC modes.
Table 6.2. YCbCr-to-RGB Conversion Formula
Format change Conversion YCbCr Input Color Range2, 3
R′ = Y + 1.371(Cr – 128)
6011 G′ = Y – 0.698(Cr – 128) – 0.336(Cb – 128)
YCbCr 16-235 Input2, 3, 4 B′ = Y + 1.732(Cb – 128)
to
RGB 16-235 Output2, 3, 4 R′ = Y + 1.540(Cr – 128)
7091 G′ = Y – 0.459(Cr – 128) – 0.183(Cb – 128)
B′ = Y + 1.816(Cb – 128)
R′ = 1.164((Y-16) + 1.371(Cr – 128))
601 G′ = 1.164((Y-16) – 0.698(Cr – 128) – 0.336(Cb – 128))
YCbCr 16-235 Input2, 3, 4 B′ = 1.164((Y-16) + 1.732(Cb – 128))
to
RGB 0-255 Output2, 3, 4 R′ = 1.164((Y-16) + 1.540(Cr – 128))
709 G′ = 1.164((Y-16) – 0.459(Cr – 128) – 0.183(Cb – 128))
B′ = 1.164((Y-16) + 1.816(Cb – 128))
Notes:
1. No clipping can be done.
2. For 10-bit deep color, multiply all occurrences of the values 16, 128, 235, and 255 by 4.
3. For 12-bit deep color, multiply all occurrences of the values 16, 128, 235, and 255 by 16.
4. For 16-bit deep color, multiply all occurrences of the values 16, 128, 235, and 255 256.

26 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

6.3. I2C Register Information

I2C registers monitor and control all functions of the transmitter. The four local I 2C slave addresses can be altered by
setting the CI2CA signal LOW or HIGH as shown in Table 6.3. An external pull-up or pull-down resistor, depending on
the desired set of I2C addresses, is used to set the level on the CI2CA pin. Refer to the Programmer Reference (see the
Lattice Semiconductor Documents section on page 52) for complete information. The Programmer’s Reference requires
an NDA with Lattice Semiconductor.
Table 6.3. Control of the Default I2C Addresses with the CI2CA Pin
Block CI2CA = 0 CI2CA = 1
Configuration Registers 0x7A 0x7E
TPI 0x72 0x76
CPI 0xC0 0xC4

6.4. I2S Audio Input

The I2S input has four I2S data signals to support up to eight channels of linear pulse code modulation (LPCM) audio.
The I2S interface also supports high bit rate audio formats such as Dolby ® TrueHD and DTS HD Master Audio. Two-
channel PCM audio can be downsampled by a factor of 2 or 4 to support 32, 44.1, or 48 kHz basic sample rates as
required by the HDMI standard.

6.5. Direct Stream Digital Input

Nine pins are used for the Direct Stream Digital interface that provides 8-channel one-bit audio data (DSD). This
interface is for SACD applications. Seven of the nine pins of this interface (four data left, four data right, and one clock)
share the I2S and S/PDIF pins.
The one-bit audio inputs are sampled on the positive edge of the DSD clock, assembled into 56-bit packets, and
mapped to the appropriate FIFO. The Audio InfoFrame, instead of the Channel Status bits, carries the sampling
information for one-bit audio. The one-bit audio interface supports an input clock frequency of 2.882 MHz (64 • 44.1
kHz).

6.6. S/PDIF Input

The Sony/Philips Digital Interface Format (S/PDIF) interface is usually associated with compressed audio formats such
as Dolby® Digital (AC-3), DTS, and the more advanced variants of these formats.

6.7. I2S and S/PDIF Supported MCLK Frequencies

The transmitter includes an integrated MCLK generator for operation without an external clock PLL, although an
external MCLK can be used. The I2S and S/PDIF interfaces support sampling frequencies of 32, 44.1, 48, 64, 88.2, 96,
128, 176.4, and 192 kHz. The 64 and 128 kHz sampling rates, however, are not part of the HDMI standard; and must be
downsampled to 32 kHz before transmitting across the HDMI link. Table 6.4 lists the supported MCLK frequencies.

SiI-DS-1084-D 27
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

Table 6.4. Supported MCLK Frequencies

Audio Sample Rate, Fs
Multiple of Fs I2S and S/PDIF Supported Rates
32 kHz 44.1 kHz 48 kHz 88.2 kHz 96 kHz 176.4 kHz 192 kHz
128 4.096 MHz 5.645 MHz 6.144 MHz 11.290 MHz 12.288 MHz 22.579 MHz 24.576 MHz
192 6.144 MHz 8.467 MHz 9.216 MHz 16.934 MHz 18.432 MHz 33.868 MHz 36.864 MHz
256 8.192 MHz 11.290 MHz 12.288 MHz 22.579 MHz 24.576 MHz 45.158 MHz 49.152 MHz
384 12.288 MHz 16.934 MHz 18.432 MHz 33.864 MHz 36.864 MHz 67.737 MHz 73.728 MHz
512 16.384 MHz 22.579 MHz 24.576 MHz 45.158 MHz 49.152 MHz
768 24.576 MHz 33.869 MHz 36.864 MHz 67.738 MHz 73.728 MHz
1024 32.768 MHz 45.158 MHz 49.152 MHz
1152 36.864 MHz 50.803 MHz 55.296 MHz

6.8. Audio Downsampler Limitations

The SiI9136-3/SiI1136 transmitter has an audio downsampler function that downsamples the incoming two-channel
audio data and sends the result over the HDMI link. The audio data can be downsampled by one-half or one-fourth
with register control. Supported conversions are: from 192 kHz to 48 kHz, 176.4 kHz to 44.1 kHz, 96 kHz to 48 kHz, and
88.2 kHz to 44.1 kHz. Some limitations in the audio sample word length when using this feature may need special
consideration in a real application.
When enabling the audio downsampler, the Channel Status registers for the audio sample word lengths sent over the
HDMI link always indicate the maximum possible length. For example, if the input S/PDIF stream was in 20-bit mode
with 16 bits valid, after enabling the downsampler the Channel Status indicates 20-bit mode with 20 bits valid.
Audio sample word length is carried in bits 33 through 35 of the Channel Status register over the HDMI link, as shown
in Table 6.5. These bits are always set to 0b101 when enabling the downsampler feature. Audio data is not affected
because 0s are placed into the LSBs of the data, and the wider word length is sent across the HDMI link.
Table 6.5. Channel Status Bits Used for Word Length
Bit
Sample Word Length
Audio Sample Word Length Maximum Word Length1 Note
(bits)
35 34 33 32
0 0 0 0 Not indicated
0 0 1 0 16 2
0 1 0 0 18 2
1 0 0 0 19 2
1 0 1 0 20 2, 4
1 1 0 0 17 2
0 0 0 1 Not indicated 3
0 0 1 1 20 3
0 1 0 1 22 3
1 0 0 1 23 3
1 0 1 1 24 3, 4
1 1 0 1 21 3
Notes:
1. Maximum audio sample word length (MAXLEN) is 20 bits if MAXLEN = 0 and 24 bits if MAXLEN = 1.
2. Maximum audio sample word length is 20.
3. Maximum audio sample word length is 24.
4. Bits [35:33] are always 0b101 when the downsampler is enabled

28 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

6.9. High Bitrate Audio on HDMI

The high bitrate compression standards such as Dolby TrueHD and DTS-HD transmit data at bit rates as high as 18 or
24 Mb/s. Because these bit rates are so high, DVD decoders and HDMI transmitters operating as source devices, and
DSP and HDMI receivers as sink devices, must carry the data using four I 2S lines rather than a single very-high-speed
S/PDIF interface or I2S bus. See Figure 6.1.

MPEG Transmitter Receiver DSP

Figure 6.1. High Speed Data Transmission

The High Bitrate audio stream is originally encoded as a single stream. To send the stream over four I 2S lines, the DVD
decoder splits it into four streams. Figure 6.2 shows the High Bitrate stream before it has been split into four I2S lines,
and Figure 6.3 shows the same audio stream after being split. Each sample requires 16 cycles of the I2S clock (SCK).

Sample 0 Sample 1 Sample 2 Sample 3 Sample 4 Sample 5 ... Sample N-1 Sample N

16-Bits
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Figure 6.2. High Bitrate Stream Before and After Reassembly and Splitting

WS Left Right Left Right

SD0 Sample 0 Sample 1 Sample 8 Sample 9

SD1 Sample 2 Sample 3 Sample 10 Sample 11

SD2 Sample 4 Sample 5 Sample 12 Sample 13

SD3 Sample 6 Sample 7 Sample 14 Sample 15

Figure 6.3. High Bitrate Stream After Splitting

6.10. Power Domains

To reduce standby power, the SiI9136-3/SiI1136 transmitter supports three power modes. Each mode complies with
the ACPI Specification.
 Power-On mode (D0): The System is powered up and running completely. All functions are available.
 Power-Standby mode (D2): Some sub-systems are enabled, but the audio and video processing pipelines are
disabled. The configuration interface, CEC, GPIO, and DDC master are active. The TMDS core is configured
independently. The Host is able to perform the following functions during this mode:
 CEC: send and receive messages
 DDC: read EDID from HDMI receiver
 optional: TMDS core enabled for generating receiver-sense interrupt requests
 Power-Off mode (D3): The chip is in its lowest power-state. All clocks are disabled. No register access is possible.
The only active function is the interrupt request generation for Hot-plug events, if that function has been
configured before entering this mode. An IRQ is asserted in this mode, but cannot be deasserted, as register access
is not possible. The host must assert RESET# to the chip to properly leave Power-Off mode.

SiI-DS-1084-D 29
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

6.11. Internal DDC Master

Figure 6.4 illustrates how the transmitter contains a master I2C port for direct connection to the HDMI cable. A
pass-through mechanism allows direct control of the DDC lines by the host I2C controller.

SiI9136-3/SiI1136 Transmitter

HDMI Connnector
Video CEC Programming
Interface registers HDMI
Audio
Transmitter
MPEG Chip Programming
I2C Interface registers

DDC Master access DDC

Figure 6.4. Simplified Host I2C Interface Using Master DDC Port

The DDC Master Interface supports the I2C transactions specified by the VESA Enhanced Display Data Channel
Standard. The DDC master block complies with the 100 kHz Standard Mode timing of the I 2C Specification and supports
slave clock stretching, as required by E-DDC. Figure 6.5 shows the supported transactions and timing sequences.

Current Read
S slv addr + R As data 0 Am data 1 Am Am data n N/As P

Sequential Read
S slv addr + W As device offset As Sr slv addr + R As data 0 Am Am data n N/As P

Enhanced DDC Read

S 0x60 N/As segment N/As* Sr slv addr + W As device offset As Sr slv addr + R As data 0 Am Am data n N/As P

Sequential Write
S slv addr + W As device offset As data 0 As As data n N/As P

S = start
Sr = restart
As = slave acknowledge
Am = master acknowledge
N = no ack
P = stop
*Do not care for segment 0, ACK for segment 1 and above

Figure 6.5. Master I2C Supported Transactions

6.12. Deep Color Support

The SiI9136-3/SiI1136 transmitter provides support for Deep Color video data up to the maximum specified link speed
of 2.25 Gb/s, at a 225 MHz internal clock rate for the Deep Color packetized data. It supports 30-bit, 36-bit, and 48-bit
video input formats, and converts the data to 8-bit packets for encryption and encoding for transferring across the
TMDS link.
When the input data width is wider than desired, the device can be programmed to dither or truncate the video data to
the desired size. For instance, if the input data width is 12 bits per pixel component, but the sink device only supports
10 bits, the transmitter can be programmed either to dither or to truncate the 12-bit input data to the desired 10-bit
output data. Dither processing is the final block in the video processing path and occurs after all other video processing
has been performed; refer to the Video Data Input and Conversion section on page 9. Note that the actual maximum
link speed for 3D FP or 4K formats is 300 MHz. However, Deep Color is only supported up to 1080p60. Thus, for Deep
Color the maximum link speed is 225 MHz.

30 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

6.13. Source Termination

TMDS transmitters use a current source to develop the low-voltage differential signal at the receiver end of the
DC-coupled TMDS transmission line, which constitutes open termination for reflected waveforms. Thus, signal
reflections created by traces, packaging, connectors, and the cable can arrive at the transmitter with increased
amplitude.
To reduce these reflections, the transmitter chip has an internal termination option of 150 Ω for single-ended
termination and 300 Ω for differential termination. This termination reduces the amplitude of the reflected signal, but
it also lowers the common-mode input voltage at the sink. As a result, Lattice Semiconductor recommends turning
internal source termination off when the transmitter operates at less than or equal to 165 MHz and turning it on for
frequencies above 165 MHz Using internal source termination at the higher frequencies while still maintaining
conformance to the HDMI Specification is possible because the sink input voltage range tolerance is wider above 165
MHz.

6.14. 3D and 4K Video Formats

The SiI9136-3/SiI1136 transmitter supports the 3D and 4K video modes described in the HDMI Specification. All modes
support RGB 4:4:4, YCbCr 4:2:2, and YCbCr 4:4:4 color formats, and 8-, 10-, and 12-bit data width per color component.
External separate HSYNC, VSYNC, and DE signals can be supplied, or these signals can be supplied as embedded
EAV/SAV sequences in the video stream. Table 6.6 shows only the maximum possible resolution with a given frame
rate. For example, Side-by-Side mode is defined for 1080p60, which implies that 720p60 and 480p60 are also
supported. Furthermore, a frame rate of 24 Hz also means that a frame rate of 23.98 Hz is supported, and a frame rate
of 60 Hz also means that a frame rate of 59.94 Hz is supported. Input pixel clock changes accordingly.
When using Side-by-Side format, 4:4:4 to 4:2:2 downsampling and 4:2:2 dithering and upsampling to 4:4:4 should be
avoided because these combinations may result in visible artifacts. Dithering should also be avoided when using frame
packing formats. Video processing should be bypassed in the case of L + depth format. The SiI9136-3/SiI1136 device
supports transmission of the Vendor Specific InfoFrame (VSIF), which carries 3D and 4K information to the receiver.
Table 6.6. Supported 3D and 4K Video Formats
3D Format Extended Definition Resolution Frame Rate (Hz) Input Pixel Clock (MHz)
1080p 50/60 297.00
progressive 1080p 24
Frame Packing
720p 50/60 148.5
interlaced 1080i 50/60
L + depth progressive 1080p 50/60 297.00
full 1080p 50/60
297.00
Side-by-Side 1080p 50/60
half
1080i 50/60 74.25
progressive 1080p 50/60 148.5
Top and Bottom interlaced 1080i 50/60
74.25
progressive 720p 50/60

4K Format Extended Definition Resolution Frame Rate (Hz) Input Pixel Clock (MHz)
29.97/30 296.703/297.000
— 3840 x 2160 25 297.000
4K
23.98/24 296.703/297.000
SMPTE 4096 x 2160 24 297.000

SiI-DS-1084-D 31
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

6.15. Control Signal Connections

Figure 6.6 shows the interconnection between the host processor and transmitter. The INT output can be connected as
an interrupt to the processor, or the processor can poll a register to determine if any of the enabled interrupts have
occurred.

IOVCC IOVCC
Stuff only one of two 4.7 k
resistors to set chip I2C address.

Host processor 4.7 k 4.7 k 4.7 k SiI9136-3/SiI1136

Transmitter
C_SCL CSCL

C_SDA CSDA
CI2CA

4.7 k

GPIO RESET#
C_CEC CEC_A
GPIO INT

Figure 6.6. Controller Connections Schematic

32 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

6.16. Input Data Bus Mapping

6.16.1. Common Video Input Formats
The video data capture block receives uncompressed 8- to 16-bit color depth, or bits per color component, digital video
from the digital video input interface and provides a data path width of 8 to 36 bits. The data path is divided internally
into three 16-bit data channels, which are configured for one of the video formats listed in Table 6.7.
Table 6.7. Video Input Formats
Bus Input Pixel Clock (MHz)
Clock
Color Video Width/ 6
Edge SYNC VGA Notes Page
Space Format Color 480i2, 3 2 XGA 720p 1080i SXGA 1080p UXGA 4K
Mode 480p
Depth
Single 36/12 Sep 27 25/27 65 74.25 74.25 108 148.5 — — 1 30
Single 30/10 Sep 27 25/27 65 74.25 74.25 108 148.5 162 — 1 30
Single 24/8 Sep 27 25/27 65 74.25 74.25 108 148.5 162 297 1, 7 30
RGB 4:4:4 Dual 12/8 Sep 27 25/27 65 74.25 74.25 — — — — 4 44
Dual 15/10 Sep 27 25/27 65 74.25 74.25 — — — — 4 44
Dual 18/12 Sep 27 25/27 65 74.25 74.25 — — — — 4 44
Dual 24/16 Sep 27 25/27 65 74.25 74.25 — — — — 4 44
Single 36/12 Sep 27 25/27 65 74.25 74.25 108 148.5 — — 1 30
Single 30/10 Sep 27 25/27 65 74.25 74.25 108 148.5 162 — 1 30
Single 24/8 Sep 27 25/27 65 74.25 74.25 108 148.5 162 297 1, 7 30
4:4:4 Dual 12/8 Sep 27 25/27 65 74.25 74.25 — — — — 4 44
Dual 15/10 Sep 27 25/27 65 74.25 74.25 — — — — 4 44
Dual 18/12 Sep 27 25/27 65 74.25 74.25 — — — — 4 44
YCbCr
xvYCC Dual 24/16 Sep 27 25/27 65 74.25 74.25 — — — — 4 44
16/8 Sep 27 25/27 65 74.25 74.25 108 148.5 162 297 1, 7 36
Single 20/10
24/12 Emb 27 25/27 65 74.25 74.25 108 148.5 162 297 1, 4, 7 38
4:2:2 Sep 27 50/54 130 148.5 148.5 — — — — 1 40
8/8
Single/
10/10 Emb 27 50/54 130 148.5 148.5 — — — — 1, 4 42
YC Mux
12/12 T1004 — 50/54 130 — — — — — — 1, 4, 5 —
Notes:
1. Latching edge is programmable.
2. 480i/p support also encompasses 576i/p support.
3. 480i must be provided at 27 MHz, using pixel replication, to be transmitted across the HDMI link.
4. If embedded syncs are provided, DE is generated internally from SAV/EAV sequences. Embedded syncs use ITU-R BT.656
SAV/EAV sequences of FF, 00, 00, XY.
5. BTA-T1004 format is defined for a single-channel (8/10/12-bit) bus.
6. Sep = separate sync; Emb = embedded sync; T1004 = BTA-T1004 encoded sync.
7. 4K resolution only supports capturing data at the falling edge of IDCK.
The system configures registers that set the bus width, video format, and rising or falling edge latching, according to
the format of the video data received by the transmitter. The logic also supports dual-edge clocking.
Relevant format information must also be programmed into registers to be formed into AVI InfoFrame packets for
passing over the HDMI link.
In the tables which follow in this section, shaded cells labeled LOW should be held LOW when not used for a selected
video format. When not used, they should be tied to ground.
In the timing diagrams which follow in this chapter, data bits labeled val do not convey pixel information and contain
values defined by the relevant specification. In the diagrams showing embedded sync, the SAV and EAV sequence FF,
00, 00, XY is specified by ITU-R BT.656.

SiI-DS-1084-D 33
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

6.16.2. RGB and YCbCr 4:4:4 Separate Sync

The pixel clock runs at the pixel rate and a complete definition of each pixel is received on each clock cycle. Each
column in Table 6.8 shows the first pixel of n + 1 pixels in the line of video. The figures below the table show RGB and
YCbCr data; the YCbCr 4:4:4 data is given in braces {}.
Table 6.8. RGB/YCbCr 4:4:4 Separate Sync Data Mapping
24-bit Data Bus 30-bit Data Bus 36-bit Data Bus
Pin Name 8-bit Color Depth 10-bit Color Depth 12-bit Color Depth
RGB YCbCr RGB YCbCr RGB YCbCr
D0 LOW LOW LOW LOW B0[0] Cb0[0]
D1 LOW LOW LOW LOW B0[1] Cb0[1]
D2 LOW LOW B0[0] Cb0[0] B0[2] Cb0[2]
D3 LOW LOW B0[1] Cb0[1] B0[3] Cb0[3]
D4 B0[0] Cb0[0] B0[2] Cb0[2] B0[4] Cb0[4]
D5 B0[1] Cb0[1] B0[3] Cb0[3] B0[5] Cb0[5]
D6 B0[2] Cb0[2] B0[4] Cb0[4] B0[6] Cb0[6]
D7 B0[3] Cb0[3] B0[5] Cb0[5] B0[7] Cb0[7]
D8 B0[4] Cb0[4] B0[6] Cb0[6] B0[8] Cb0[8]
D9 B0[5] Cb0[5] B0[7] Cb0[7] B0[9] Cb0[9]
D10 B0[6] Cb0[6] B0[8] Cb0[8] B0[10] Cb0[10]
D11 B0[7] Cb0[7] B0[9] Cb0[9] B0[11] Cb0[11]
D12 LOW LOW LOW LOW G0[0] Y0[0]
D13 LOW LOW LOW LOW G0[1] Y0[1]
D14 LOW LOW G0[0] Y0[0] G0[2] Y0[2]
D15 LOW LOW G0[1] Y0[1] G0[3] Y0[3]
D16 G0[0] Y0[0] G0[2] Y0[2] G0[4] Y0[4]
D17 G0[1] Y0[1] G0[3] Y0[3] G0[5] Y0[5]
D18 G0[2] Y0[2] G0[4] Y0[4] G0[6] Y0[6]
D19 G0[3] Y0[3] G0[5] Y0[5] G0[7] Y0[7]
D20 G0[4] Y0[4] G0[6] Y0[6] G0[8] Y0[8]
D21 G0[5] Y0[5] G0[7] Y0[7] G0[9] Y0[9]
D22 G0[6] Y0[6] G0[8] Y0[8] G0[10] Y0[10]
D23 G0[7] Y0[7] G0[9] Y0[9] G0[11] Y0[11]
D24 LOW LOW LOW LOW R0[0] Cr0[0]
D25 LOW LOW LOW LOW R0[1] Cr0[1]
D26 LOW LOW R0[0] Cr0[0] R0[2] Cr0[2]
D27 LOW LOW R0[1] Cr0[1] R0[3] Cr0[3]
D28 R0[0] Cr0[0] R0[2] Cr0[2] R0[4] Cr0[4]
D29 R0[1] Cr0[1] R0[3] Cr0[3] R0[5] Cr0[5]
D30 R0[2] Cr0[2] R0[4] Cr0[4] R0[6] Cr0[6]
D31 R0[3] Cr0[3] R0[5] Cr0[5] R0[7] Cr0[7]
D32 R0[4] Cr0[4] R0[6] Cr0[6] R0[8] Cr0[8]
D33 R0[5] Cr0[5] R0[7] Cr0[7] R0[9] Cr0[9]
D34 R0[6] Cr0[6] R0[8] Cr0[8] R0[10] Cr0[10]
D35 R0[7] Cr0[7] R0[9] Cr0[9] R0[11] Cr0[11]
HSYNC HSYNC HSYNC HSYNC HSYNC HSYNC HSYNC
VSYNC VSYNC VSYNC VSYNC VSYNC VSYNC VSYNC
DE DE DE DE DE DE DE

34 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

blank Pixel 0 Pixel 1 Pixel 2 Pixel 3 Pixeln - 1 Pixel n blank blank blank
R0[7:0] R1[7:0] R2[7:0] R3[7:0] Rn-1[7:0] Rn[7:0]
D[35:20] val
{Cr0[7:0]} {Cr1[7:0]} {Cr2[7:0]} {Cr3[7:0]} {Crn-1[7:0]} {Crn[7:0]}
val val val

G0[7:0] G1[7:0] G2[7:0] G3[7:0] Gn-1[7:0] Gn[7:0]

D[23:16] val
{Y0[7:0]} {Y1[7:0]} {Y2[7:0]} {Y3[7:0]} {Yn-1[7:0]} {Yn[7:0]}
val val val

B0[7:0] B1[7:0] B2[7:0] B3[7:0] Bn-1[7:0] Bn[7:0]

D[11:4] val
{Cb0[7:0]} {Cb1[7:0]} {Cb2[7:0]} {Cb3[7:0]} {Cbn-1[7:0]} {Cbn[7:0]}
val val val

IDCK

HSYNC,
VSYNC

Figure 6.7. 8-Bit Color Depth RGB/YCbCr/xvYCC 4:4:4 Timing

blank Pixel 0 Pixel 1 Pixel 2 Pixel 3 Pixel n - 1 Pixel n blank blank blank
R0[9:0] R1[9:0] R2[9:0] R3[9:0] Rn-1[9:0] Rn[9:0]
D[35:26] val
{Cr0[9:0]} {Cr1[9:0]} {Cr2[9:0]} {Cr3[9:0]} {Crn-1[9:0]} {Crn[9:0]}
val val val

G0[9:0] G1[9:0] G2[9:0] G3[9:0] Gn-1[9:0] Gn[9:0]

D[23:14] val
{Y0[9:0]} {Y1[9:0]} {Y2[9:0]} {Y3[9:0]} {Yn-1[9:0]} {Yn[9:0]}
val val val

B0[9:0] B1[9:0] B2[9:0] B3[9:0] Bn-1[9:0] Bn[9:0]

D[11:2] val
{Cb0[9:0]} {Cb1[9:0]} {Cb2[9:0]} {Cb3[9:0]} {Cbn-1[9:0]} {Cbn[9:0]}
val val val

IDCK

HSYNC,
VSYNC

Figure 6.8. 10-Bit Color Depth RGB/YCbCr/xvYCC 4:4:4 Timing

blank Pixel 0 Pixel 1 Pixel 2 Pixel 3 Pixel n - 1 Pixel n blank blank blank
R0[11:0] R1[11:0] R2[11:0] R3[11:0] Rn-1[11:0] Rn[11:0]
D[35:24] val
{Cr0[11:0]} {Cr1[11:0]} {Cr2[11:0]} {Cr3[11:0]} {Crn-1[11:0]} {Crn[11:0]}
val val val

G0[11:0] G1[11:0] G2[11:0] G3[11:0] Gn-1[11:0] Gn[11:0]

D[23:12] val
{Y0[11:0]} {Y1[11:0]} {Y2[11:0]} {Y3[11:0]} {Yn-1[11:0]} {Yn[11:0]}
val val val

B0[11:0] B1[11:0] B2[11:0] B3[11:0] Bn-1[11:0] Bn[11:0]

D[11:0] val
{Cb0[11:0]} {Cb1[11:0]} {Cb2[11:0]} {Cb3[11:0]} {Cbn-1[11:0]} {Cbn[11:0]}
val val val

IDCK

HSYNC,
VSYNC

Figure 6.9. 12-Bit Color Depth RGB/YCbCr/xvYCC 4:4:4 Timing

SiI-DS-1084-D 35
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

6.16.3. YC 4:2:2 Separate Sync Formats

The YC 4:2:2 formats receive one pixel for every pixel clock period. A luma (Y) value is carried for every pixel, but the
chroma values (Cb and Cr) change only every second pixel. The data bus can be 16, 20, or 24 bits. HSYNC and VSYNC are
driven explicitly on their own signals. Each pair of columns in Table 6.9 shows the first and second pixel of n + 1 pixels in
the line of video. The DE HIGH time must contain an even number of pixel clocks.
Table 6.9. YC 4:2:2 Separate Sync Data Mapping
16-bit Data Bus 20-bit Data Bus 24-bit Data Bus
Pin Name 8-bit Color Depth 10-bit Color Depth 12-bit Color Depth
Pixel #0 Pixel #1 Pixel #0 Pixel #1 Pixel #0 Pixel #1
D[3:0] LOW LOW LOW LOW LOW LOW
D4 LOW LOW LOW LOW Y0[0] Y1[0]
D5 LOW LOW LOW LOW Y0[1] Y1[1]
D6 LOW LOW Y0[0] Y1[0] Y0[2] Y1[2]
D7 LOW LOW Y0[1] Y1[1] Y0[3] Y1[3]
D8 LOW LOW LOW LOW Cb0[0] Cr0[0]
D9 LOW LOW LOW LOW Cb0[1] Cr0[1]
D10 LOW LOW Cb0[0] Cr0[0] Cb0[2] Cr0[2]
D11 LOW LOW Cb0[1] Cr0[1] Cb0[3] Cr0[3]
D[15:12] LOW LOW LOW LOW LOW LOW
D16 Y0[0] Y1[0] Y0[2] Y1[2] Y0[4] Y1[4]
D17 Y0[1] Y1[1] Y0[3] Y1[3] Y0[5] Y1[5]
D18 Y0[2] Y1[2] Y0[4] Y1[4] Y0[6] Y1[6]
D19 Y0[3] Y1[3] Y0[5] Y1[5] Y0[7] Y1[7]
D20 Y0[4] Y1[4] Y0[6] Y1[6] Y0[8] Y1[8]
D21 Y0[5] Y1[5] Y0[7] Y1[7] Y0[9] Y1[9]
D22 Y0[6] Y1[6] Y0[8] Y1[8] Y0[10] Y1[10]
D23 Y0[7] Y1[7] Y0[9] Y1[9] Y0[11] Y1[11]
D[27:24] LOW LOW LOW LOW LOW LOW
D28 Cb0[0] Cr0[0] Cb0[2] Cr0[2] Cb0[4] Cr0[4]
D29 Cb0[1] Cr0[1] Cb0[3] Cr0[3] Cb0[5] Cr0[5]
D30 Cb0[2] Cr0[2] Cb0[4] Cr0[4] Cb0[6] Cr0[6]
D31 Cb0[3] Cr0[3] Cb0[5] Cr0[5] Cb0[7] Cr0[7]
D32 Cb0[4] Cr0[4] Cb0[6] Cr0[6] Cb0[8] Cr0[8]
D33 Cb0[5] Cr0[5] Cb0[7] Cr0[7] Cb0[9] Cr0[9]
D34 Cb0[6] Cr0[6] Cb0[8] Cr0[8] Cb0[10] Cr0[10]
D35 Cb0[7] Cr0[7] Cb0[9] Cr0[9] Cb0[11] Cr0[11]
HSYNC HSYNC HSYNC HSYNC HSYNC HSYNC HSYNC
VSYNC VSYNC VSYNC VSYNC VSYNC VSYNC VSYNC
DE DE DE DE DE DE DE

36 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

blank Pixel 0 Pixel 1 Pixel 2 Pixel 3 Pixeln - 1 Pixel n blank blank blank

D[35:28] val Cb0[7:0] Cr0[7:0] Cb2[7:0] Cr2[7:0] Crn-1[7:0] Cbn-1[7:0] val val val

D[23:16] val Y0[7:0] Y1[7:0] Y2[7:0] Y3[7:0] Yn -1[7:0] Yn [7:0] val val val

IDCK

HSYNC,
VSYNC

Figure 6.10. 8-Bit Color Depth YC 4:2:2 Timing

blank Pixel 0 Pixel 1 Pixel 2 Pixel 3 Pixeln - 1 Pixel n blank blank blank

D[35:28] val Cb0[9:2] Cr0[9:2] Cb2[9:2] Cr2[9:2] Crn-1[9:2] Cbn-1[9:2] val val val

D[23:16] val Y0[9:2] Y1[9:2] Y2[9:2] Y3[9:2] Y n -1[9:2] Y n [9:2] val val val

D[11:10] val Cb0[1:0] Cr0[1:0] Cb2[1:0] Cr2[1:0] Crn-1[1:0] Cbn-1[1:0] val val val

D[7:6] val Y0[1:0] Y1[1:0] Y2[1:0] Y3[1:0] Y n -1[1:0] Y n [1:0] val val val

IDCK

HSYNC,
VSYNC

Figure 6.11. 10-Bit Color Depth YC 4:2:2 Timing

blank Pixel 0 Pixel 1 Pixel 2 Pixel 3 Pixeln - 1 Pixel n blank blank blank

D[35:28] val Cb0[11:4] Cr0[11:4] Cb2[11:4] Cr2[11:4] Crn-1[11:4] Cbn-1[11:4] val val val

D[23:16] val Y0[11:4] Y1[11:4] Y2[11:4] Y3[11:4] Yn-1[11:4] Yn[11:4] val val val

D[11:8] val Cb0[3:0] Cr0[3:0] Cb2[3:0] Cr2[3:0] Crn-1[3:0] Cbn-1[3:0] val val val

D[7:4] val Y0[3:0] Y1[3:0] Y2[3:0] Y3[3:0] Yn-1[3:0] Yn[3:0] val val val

IDCK

HSYNC,
VSYNC

Figure 6.12. 12-Bit Color Depth YC 4:2:2 Timing

SiI-DS-1084-D 37
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

6.16.4. YC 4:2:2 Embedded Syncs Formats

The Embedded Sync format is identical to the YC 4:2:2 formats with Separate Syncs, except that the syncs are
embedded and not explicit. The data bus can be 16, 20, or 24 bits. Each pair of columns in Table 6.10 shows the first
and second pixel of n + 1 pixels in the line of video.
Table 6.10. YC 4:2:2 Embedded Sync Data Mapping
16-bit Data Bus 20-bit Data Bus 24-bit Data Bus
Pin Name 8-bit Color Depth 10-bit Color Depth 12-bit Color Depth
Pixel #0 Pixel #1 Pixel #0 Pixel #1 Pixel #0 Pixel #1
D[3:0] LOW LOW LOW LOW LOW LOW
D4 LOW LOW LOW LOW Y0[0] Y1[0]
D5 LOW LOW LOW LOW Y0[1] Y1[1]
D6 LOW LOW Y0[0] Y1[0] Y0[2] Y1[2]
D7 LOW LOW Y0[1] Y1[1] Y0[3] Y1[3]
D8 LOW LOW LOW LOW Cb0[0] Cr0[0]
D9 LOW LOW LOW LOW Cb0[1] Cr0[1]
D10 LOW LOW Cb0[0] Cr0[0] Cb0[2] Cr0[2]
D11 LOW LOW Cb0[1] Cr0[1] Cb0[3] Cr0[3]
D[15:12] LOW LOW LOW LOW LOW LOW
D16 Y0[0] Y1[0] Y0[2] Y1[2] Y0[4] Y1[4]
D17 Y0[1] Y1[1] Y0[3] Y1[3] Y0[5] Y1[5]
D18 Y0[2] Y1[2] Y0[4] Y1[4] Y0[6] Y1[6]
D19 Y0[3] Y1[3] Y0[5] Y1[5] Y0[7] Y1[7]
D20 Y0[4] Y1[4] Y0[6] Y1[6] Y0[8] Y1[8]
D21 Y0[5] Y1[5] Y0[7] Y1[7] Y0[9] Y1[9]
D22 Y0[6] Y1[6] Y0[8] Y1[8] Y0[10] Y1[10]
D23 Y0[7] Y1[7] Y0[9] Y1[9] Y0[11] Y1[11]
D[27:24] LOW LOW LOW LOW LOW LOW
D28 Cb0[0] Cr0[0] Cb0[2] Cr0[2] Cb0[4] Cr0[4]
D29 Cb0[1] Cr0[1] Cb0[3] Cr0[3] Cb0[5] Cr0[5]
D30 Cb0[2] Cr0[2] Cb0[4] Cr0[4] Cb0[6] Cr0[6]
D31 Cb0[3] Cr0[3] Cb0[5] Cr0[5] Cb0[7] Cr0[7]
D32 Cb0[4] Cr0[4] Cb0[6] Cr0[6] Cb0[8] Cr0[8]
D33 Cb0[5] Cr0[5] Cb0[7] Cr0[7] Cb0[9] Cr0[9]
D34 Cb0[6] Cr0[6] Cb0[8] Cr0[8] Cb0[10] Cr0[10]
D35 Cb0[7] Cr0[7] Cb0[9] Cr0[9] Cb0[11] Cr0[11]
HSYNC LOW LOW LOW LOW LOW LOW
VSYNC LOW LOW LOW LOW LOW LOW
DE LOW LOW LOW LOW LOW LOW

38 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

SAV Pixel 0 Pixel 1 Pixel 2 Pixel 3 Pixel n - 1 Pixel n EAV

D[35:28] FF 00 00 XY Cb0[7:0] Cr0[7:0] Cb2[7:0] Cr2[7:0] Crn-1[7:0] Cbn-1[7:0] FF 00 00 XY

D[23:16] FF 00 00 XY Y0[7:0] Y1[7:0] Y2[7:0] Y3[7:0] Yn-1[7:0] Yn[7:0] FF 00 00 XY

IDCK

Active
video

Figure 6.13. 8-Bit Color Depth YC 4:2:2 Embedded Sync Timing

SAV Pixel 0 Pixel 1 Pixel 2 Pixel 3 Pixel n - 1 Pixel n EAV

D[35:28] FF 00 00 XY Cb0[9:2] Cr0[9:2] Cb2[9:2] Cr2[9:2] Crn-1[9:2] Cbn-1[9:2] FF 00 00 XY

D[23:16] FF 00 00 XY Y0[9:2] Y1[9:2] Y2[9:2] Y3[9:2] Yn-1[9:2] Yn[9:2] FF 00 00 XY

D[11:10] FF 00 00 XY Cb0[1:0] Cr0[1:0] Cb2[1:0] Cr2[1:0] Crn-1[1:0] Cbn-1[1:0] FF 00 00 XY

D[7:6] FF 00 00 XY Y0[1:0] Y1[1:0] Y2[1:0] Y3[1:0] Yn-1[1:0] Yn[1:0] FF 00 00 XY

IDCK

Active
video

Figure 6.14. 10-Bit Color Depth YC 4:2:2 Embedded Sync Timing

SAV Pixel 0 Pixel 1 Pixel 2 Pixel 3 Pixel n - 1 Pixel n EAV

D[35:28] FF 00 00 XY Cb0[11:4] Cr0[11:4] Cb2[11:4] Cr2[11:4] Crn-1[11:4] Cbn-1[11:4] FF 00 00 XY

D[23:16] FF 00 00 XY Y0[11:4] Y1[11:4] Y2[11:4] Y3[11:4] Yn-1[11:4] Yn[11:4] FF 00 00 XY

D[11:8] FF 00 00 XY Cb0[3:0] Cr0[3:0] Cb2[3:0] Cr2[3:0] Crn-1[3:0] Cbn-1[3:0] FF 00 00 XY

D[7:4] FF 00 00 XY Y0[3:0] Y1[3:0] Y2[3:0] Y3[3:0] Yn-1[3:0] Yn[3:0] FF 00 00 XY

IDCK

Active
video

Figure 6.15. 12-Bit Color Depth YC 4:2:2 Embedded Sync Timing

SiI-DS-1084-D 39
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

6.16.5. YC Mux 4:2:2 Separate Sync Formats

The video data is multiplexed onto fewer pins than the mapping described in the YC 4:2:2 Separate Sync Formats on
page 36. The clock rate is doubled so a chroma value is sent for each pixel, followed by a corresponding luma value for
the same pixel. Thus, a luma (Y) value is provided for each pixel, while the Cb and Cr values alternate on successive
pixels. Each group of four columns in Table 6.11 shows the four clock cycles for the first two pixels of the line. Pixel
values for Cb0 and Y0 values are sent with the first pixel (first two clock cycles). Then the Cr0 and Y1 values are sent
with the second pixel (next two clock cycles). The figures below the table show how this pattern is extended for the
rest of the pixels in a video line of n + 1 pixels.
Table 6.11. YC Mux 4:2:2 Separate Sync Data Mapping
8-bit Data Bus 10-bit Data Bus 12-bit Data Bus
8-bit Color Depth 10-bit Color Depth 12-bit Color Depth
Pin Name
Clock cycle Clock cycle Clock cycle
First Second Third Fourth First Second Third Fourth First Second Third Fourth
D[3:0] LOW LOW LOW
D4 LOW LOW Cb0[0] Y0[0] Cr0[0] Y1[0]
D5 LOW LOW Cb0[1] Y0[1] Cr0[1] Y1[1]
D6 LOW Cb0[0] Y0[0] Cr0[0] Y1[0] Cb0[2] Y0[2] Cr0[2] Y1[2]
D7 LOW Cb0[1] Y0[1] Cr0[1] Y1[1] Cb0[3] Y0[3] Cr0[3] Y1[3]
D[15:8] LOW LOW LOW
D16 Cb0[0] Y0[0] Cr0[0] Y1[0] Cb0[2] Y0[2] Cr0[2] Y1[2] Cb0[4] Y0[4] Cr0[4] Y1[4]
D17 Cb0[1] Y0[1] Cr0[1] Y1[1] Cb0[3] Y0[3] Cr0[3] Y1[3] Cb0[5] Y0[5] Cr0[5] Y1[5]
D18 Cb0[2] Y0[2] Cr0[2] Y1[2] Cb0[4] Y0[4] Cr0[4] Y1[4] Cb0[6] Y0[6] Cr0[6] Y1[6]
D19 Cb0[3] Y0[3] Cr0[3] Y1[3] Cb0[5] Y0[5] Cr0[5] Y1[5] Cb0[7] Y0[7] Cr0[7] Y1[7]
D20 Cb0[4] Y0[4] Cr0[4] Y1[4] Cb0[6] Y0[6] Cr0[6] Y1[6] Cb0[8] Y0[8] Cr0[8] Y1[8]
D21 Cb0[5] Y0[5] Cr0[5] Y1[5] Cb0[7] Y0[7] Cr0[7] Y1[7] Cb0[9] Y0[9] Cr0[9] Y1[9]
D22 Cb0[6] Y0[6] Cr0[6] Y1[6] Cb0[8] Y0[8] Cr0[8] Y1[8] Cb0[10] Y0[10] Cr0[10] Y1[10]
D23 Cb0[7] Y0[7] Cr0[7] Y1[7] Cb0[9] Y0[9] Cr0[9] Y1[9] Cb0[11] Y0[11] Cr0[11] Y1[11]
D[35:24] LOW LOW LOW
HSYNC HSYNC HSYNC HSYNC HSYNC HSYNC HSYNC
VSYNC VSYNC VSYNC VSYNC VSYNC VSYNC VSYNC
DE DE DE DE DE DE DE

Pixel 0 Pixel 1 Pixel 2 Pixel 3 Pixel n - 1 Pixel n

D[23:16] val Cb0[7:0] Y0[7:0] Cr0[7:0] Y1[7:0] Cb2[7:0] Y2[7:0] Cr2[7:0] Y3[7:0] Cbn-1[7:0] Yn-1[7:0] Crn-1[7:0] Yn[7:0] val

IDCK

HSYNC
VSYNC

Figure 6.16. 8-Bit Color Depth YC Mux 4:2:2 Timing

40 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

Pixel 0 Pixel 1 Pixel 2 Pixel 3 Pixel n - 1 Pixel n

D[23:16] val Cb0[9:2] Y0[9:2] Cr0[9:2] Y1[9:2] Cb2[9:2] Y2[9:2] Cr2[9:2] Y3[9:2] Cbn-1[9:2] Yn-1[9:2] Crn-1[9:2] Yn[9:2] val

D[7:6] val Cb0[1:0] Y0[1:0] Cr0[1:0] Y1[1:0] Cb2[1:0] Y2[1:0] Cr2[1:0] Y3[1:0] Cbn-1[1:0] Yn-1[1:0] Crn-1[1:0] Yn[1:0] val

IDCK

HSYNC
VSYNC

Figure 6.17. 10-Bit Color Depth YC Mux 4:2:2 Timing

Pixel 0 Pixel 1 Pixel 2 Pixel 3 Pixel n - 1 Pixel n

D[23:16] val Cb0[11:4] Y0[11:4] Cr0[11:4] Y1[11:4] Cb2[11:4] Y2[11:4] Cr2[11:4] Y3[11:4] Cbn-1[11:4] Yn-1[11:4] Crn-1[11:4] Yn[11:4] val

D[7:4] val Cb0[3:0] Y0[3:0] Cr0[3:0] Y1[3:0] Cb2[3:0] Y2[3:0] Cr2[3:0] Y3[3:0] Cbn-1[3:0] Yn-1[3:0] Crn-1[3:0] Yn[3:0] val

IDCK

HSYNC
VSYNC

Figure 6.18. 12-Bit Color Depth YC Mux 4:2:2 Timing

SiI-DS-1084-D 41
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

6.16.6. YC Mux 4:2:2 Embedded Sync Formats

This format is similar to the one described in the YC Mux 4:2:2 Separate Sync Formats section on page 40, except the
syncs are embedded. A luma (Y) value is provided for each pixel, while the Cb and Cr values alternate on successive
pixels. Each group of four columns in Table 6.12 shows the four clock cycles for the first two pixels of the line. Pixel
values for Cb0 and Y0 values are sent with the first pixel (first two clock cycles). Then the Cr0 and Y1 values are sent
with the second pixel (next two clock cycles). The figures following this table show only the first two pixels and last
pixel of the line to make room to show the SAV and EAV sequences, but the remaining pixels are similar to those shown
in the figures of the previous section.
Table 6.12. YC Mux 4:2:2 Embedded Sync Data Mapping
8-bit Data Bus 10-bit Data Bus 12-bit Data Bus
8-bit Color Depth 10-bit Color Depth 12-bit Color Depth
Pin Name
Clock cycle Clock cycle Clock cycle
First Second Third Fourth First Second Third Fourth First Second Third Fourth
D[3:0] LOW LOW LOW
D4 LOW LOW Cb0[0] Y0[0] Cr0[0] Y1[0]
D5 LOW LOW Cb0[1] Y0[1] Cr0[1] Y1[1]
D6 LOW Cb0[0] Cb0[2] Cr0[0] Cr0[2] Cr0[2] Y0[2] Cb0[2] Y1[2]
D7 LOW Cb0[1] Cb0[3] Cr0[1] Cr0[3] Cr0[3] Y0[3] Cb0[3] Y1[3]
D[15:8] LOW LOW LOW
D16 Cb0[0] Y0[0] Cr0[0] Y1[0] Cb0[2] Y0[2] Cr0[2] Y1[2] Cb0[4] Y0[4] Cr0[4] Y1[4]
D17 Cb0[1] Y0[1] Cr0[1] Y1[1] Cb0[3] Y0[3] Cr0[3] Y1[3] Cb0[5] Y0[5] Cr0[5] Y1[5]
D18 Cb0[2] Y0[2] Cr0[2] Y1[2] Cb0[4] Y0[4] Cr0[4] Y1[4] Cb0[6] Y0[6] Cr0[6] Y1[6]
D19 Cb0[3] Y0[3] Cr0[3] Y1[3] Cb0[5] Y0[5] Cr0[5] Y1[5] Cb0[7] Y0[7] Cr0[7] Y1[7]
D20 Cb0[4] Y0[4] Cr0[4] Y1[4] Cb0[6] Y0[6] Cr0[6] Y1[6] Cb0[8] Y0[8] Cr0[8] Y1[8]
D21 Cb0[5] Y0[5] Cr0[5] Y1[5] Cb0[7] Y0[7] Cr0[7] Y1[7] Cb0[9] Y0[9] Cr0[9] Y1[9]
D22 Cb0[6] Y0[6] Cr0[6] Y1[6] Cb0[8] Y0[8] Cr0[8] Y1[8] Cb0[10] Y0[10] Cr0[10] Y1[10]
D23 Cb0[7] Y0[7] Cr0[7] Y1[7] Cb0[9] Y0[9] Cr0[9] Y1[9] Cb0[11] Y0[11] Cr0[11] Y1[11]
D[35:24] LOW LOW LOW
HSYNC LOW LOW LOW
VSYNC LOW LOW LOW
DE LOW LOW LOW

SAV Pixel 0 Pixel 1 Pixel n EAV

D[23:16] FF 00 00 XY Cb0[7:0] Y0[7:0] Cr0[7:0] Y1[7:0] Crn-1[7:0] Yn[7:0] FF 00 00 XY

IDCK

Active
video

Figure 6.19. 8-Bit Color Depth YC Mux 4:2:2 Embedded Sync Timing

42 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

SAV Pixel 0 Pixel 1 Pixel n EAV

D[23:16] FF 00 00 XY Cb0[9:2] Y0[9:2] Cr0[9:2] Y1[9:2] Crn-1[9:2] Yn[9:2] FF 00 00 XY

D[7:6] FF 00 00 XY Cb0[1:0] Y0[1:0] Cr0[1:0] Y1[1:0] Crn-1[1:0] Yn[1:0] FF 00 00 XY

IDCK

Active
video

Figure 6.20. 10-Bit Color Depth YC Mux 4:2:2 Embedded Sync Timing

SAV Pixel 0 Pixel 1 Pixel n EAV

D[23:16] FF 00 00 XY Cb0[11:4] Y0[11:4] Cr0[11:4] Y1[11:4] Crn-1[11:4] Yn[11:4] FF 00 00 XY

D[7:4] FF 00 00 XY Cb0[3:0] Y0[3:0] Cr0[3:0] Y1[3:0] Crn-1[3:0] Yn[3:0] FF 00 00 XY

IDCK

Active
video

Figure 6.21. 12-Bit Color Depth YC Mux 4:2:2 Embedded Sync Timing

SiI-DS-1084-D 43
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

6.16.7. RGB and YCbCr 4:4:4 Dual Edge Mode Formats

The pixel clock runs at the pixel rate and a complete definition of each pixel is received on each clock cycle. One clock
edge latches in half the pixel data. The opposite clock edge latches in the remaining half of the pixel data on the same
pins. The same timing format is used for RGB and YCbCr 4:4:4. Each pair of columns in Table 6.13 shows the first pixel
of n + 1 pixels in the line of video. The figures below the table show RGB and YCbCr data; the YCbCr 4:4:4 data is given
in braces {}. Data and control signals (Dx, DE, HSYNC, and VSYNC) must change state to meet the setup and hold times
specified for the dual edge mode, with respect to the first edge of IDCK as defined by the setting of the Edge Select bit.
Refer to the Programmer Reference (see the Lattice Semiconductor Documents section on page 52). The figures show
IDCK latching input data when the Edge Select bit is set to 1 (first edge is the rising edge). See Table 4.11 on page 18 for
the required timing relationships.
Table 6.13. RGB/YCbCr 4:4:4 Separate Sync Dual-Edge Data Mapping
12-bit Data Bus 15-bit Data Bus 18-bit Data Bus 24-bit Data Bus
8-bit Color Depth 10-bit Color Depth 12-bit Color Depth 16-bit Color Depth
Pin
RGB YCbCr RGB YCbCr RGB YCbCr RGB YCbCr
Name
First Second First Second First Second First Second First Second First Second First Second First Second
Edge Edge Edge Edge Edge Edge Edge Edge Edge Edge Edge Edge Edge Edge Edge Edge
D0 LOW LOW LOW LOW LOW LOW LOW LOW B0[0] G0[6] Cb0[0] Y0[6] B0[0] G0[8] Cb0[0] Y[08]
D1 LOW LOW LOW LOW LOW LOW LOW LOW B0[1] G0[7] Cb0[1] Y0[7] B0[1] G0[9] Cb0[1] Y[09]
D2 LOW LOW LOW LOW B0[0] G0[5] Cb0[0] Y0[5] B0[2] G0[8] Cb0[2] Y0[8] B0[2] G0[10] Cb0[2] Y[010]
D3 LOW LOW LOW LOW B0[1] G0[6] Cb0[1] Y0[6] B0[3] G0[9] Cb0[3] Y0[9] B0[3] G0[11] Cb0[3] Y[011]
D4 B0[0] G0[4] Cb0[0] Y0[4] B0[2] G0[7] Cb0[2] Y0[7] B0[4] G0[10] Cb0[4] Y0[10] B0[4] G0[12] Cb0[4] Y[012]
D5 B0[1] G0[5] Cb0[1] Y0[5] B0[3] G0[8] Cb0[3] Y0[8] B0[5] G0[11] Cb0[5] Y0[11] B0[5] G0[13] Cb0[5] Y[013]
D6 B0[2] G0[6] Cb0[2] Y0[6] B0[4] G0[9] Cb0[4] Y0[9] B0[6] R0[0] Cb0[6] Cr0[0] B0[6] G0[14] Cb0[6] Y[014]
D7 B0[3] G0[7] Cb0[3] Y0[7] B0[5] R0[0] Cb0[5] Cr0[0] B0[7] R0[1] Cb0[7] Cr0[1] B0[7] G0[15] Cb0[7] Y[015]
D8 B0[4] R0[0] Cb0[4] Cr0[0] B0[6] R0[1] Cb0[6] Cr0[1] B0[8] R0[2] Cb0[8] Cr0[2] B0[8] R0[0] Cb0[8] Cr[00]
D9 B0[5] R0[1] Cb0[5] Cr0[1] B0[7] R0[2] Cb0[7] Cr0[2] B0[9] R0[3] Cb0[9] Cr0[3] B0[9] R0[1] Cb0[9] Cr[01]
D10 B0[6] R0[2] Cb0[6] Cr0[2] B0[8] R0[3] Cb0[8] Cr0[3] B0[10] R0[4] Cb0[10] Cr0[4] B0[10] R0[2] Cb0[10] Cr[02]
D11 B0[7] R0[3] Cb0[7] Cr0[3] B0[9] R0[4] Cb0[9] Cr0[4] B0[11] R0[5] Cb0[11] Cr0[5] B0[11] R0[3] Cb0[11] Cr[03]
D12 LOW LOW LOW LOW LOW LOW LOW LOW G0[0] R0[6] Y0[0] Cr0[6] B0[12] R0[4] Cb0[12] Cr[04]
D13 LOW LOW LOW LOW LOW LOW LOW LOW G0[1] R0[7] Y0[1] Cr0[7] B0[13] R0[5] Cb0[13] Cr[05]
D14 LOW LOW LOW LOW G0[0] R0[5] Y0[0] Cr0[5] G0[2] R0[8] Y0[2] Cr0[8] B0[14] R0[6] Cb0[14] Cr[06]
D15 LOW LOW LOW LOW G0[1] R0[6] Y0[1] Cr0[6] G0[3] R0[9] Y0[3] Cr0[9] B0[15] R0[7] Cb0[15] Cr[07]
D16 G0[0] R0[4] Y0[0] Cr0[4] G0[2] R0[7] Y0[2] Cr0[7] G0[4] R0[10] Y0[4] Cr0[10] G0[0] R0[8] Y0[0] Cr[08]
D17 G0[1] R0[5] Y0[1] Cr0[5] G0[3] R0[8] Y0[3] Cr0[8] G0[5] R0[11] Y0[5] Cr0[11] G0[1] R0[9] Y0[1] Cr[09]
D18 G0[2] R0[6] Y0[2] Cr0[6] G0[4] R0[9] Y0[4] Cr0[9] LOW LOW LOW LOW G0[2] R0[10] Y0[2] Cr[010]
D19 G0[3] R0[7] Y0[3] Cr0[7] LOW LOW LOW LOW LOW LOW LOW LOW G0[3] R0[11] Y0[3] Cr[011]
D20 LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW G0[4] R0[12] Y0[4] Cr[012]
D21 LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW G0[5] R0[13] Y0[5] Cr[013]
D22 LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW G0[6] R0[14] Y0[6] Cr[014]
D23 LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW G0[7] R0[15] Y0[7] Cr[015]
HS HS HS HS HS HS HS HS HS HS HS HS HS HS HS HS HS
VS VS VS VS VS VS VS VS VS VS VS VS VS VS VS VS VS
DE DE DE DE DE DE DE DE DE DE DE DE DE DE DE DE DE

44 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

blank Pixel 0 Pixel 1 Pixel 2 Pixel n - 1 Pixel n blank blank

G0[3:0] R0[7:4] G1[3:0] R1[7:4] G2[3:0] R2[7:4] Gn-1[3:0] Rn-1[7:4] Gn[3:0] Rn[7:4]
D[19:16] val
{Y0[3:0]} {Cr0[7:4]} {Y1[3:0]} {Cr1[7:4]} {Y2[3:0]} {Cr2[7:4]} {Yn-1[3:0]} {Crn-1[7:4]} {Yn[3:0]} {Crn[7:4]}
val val val val

B0[7:4] R0[3:0] B1[7:4] R1[3:0] B2[7:4] R0[3:0] Bn-1[7:4] Rn-1[3:0] Bn[7:4] Rn[3:0]
D[11:8] val
{Cb0[7:4]} {Cr0[3:0]} {Cb1[7:4]} {Cr1[3:0]} {Cb2[7:4]} {Cr2[3:0]} {Cbn-1[7:4]} {Crn-1[3:0]} {Cbn[7:4]} {Crn[3:0]}
val val val val

B0[3:0] G0[7:4] B1[3:0] G1[7:4] B2[3:0] G0[7:4] Bn-1[3:0] Gn-1[7:4] Bn[3:0] Gn[7:4]
D[7:4] val
{Cb0[3:0]} {Y0[7:4]} {Cb1[3:0]} {Y1[7:4]} {Cb2[3:0]} {Y2[7:4]} {Cbn-1[3:0]} {Yn-1[7:4]} {Cbn[3:0} {Yn[7:4]}
val val val val

IDCK

HSYNC,
VSYNC

Figure 6.22. 8-Bit Color Depth 4:4:4 Dual Edge Timing

blank Pixel 0 Pixel 1 Pixel 2 Pixel n - 1 Pixel n blank blank

G0[4:0] R0[9:5] G1[4:0] R1[9:5] G2[4:0] R2[9:5] Gn-1[4:0] Rn-1[9:5] Gn[4:0] Rn[9:5]
D[18:14] val
{Y0[4:0]} {Cr0[9:5]} {Y1[4:0]} {Cr1[9:5]} {Y2[4:0]} {Cr2[9:5]} {Yn-1[4:0]} {Crn-1[9:5]} {Yn[4:0]} {Crn[9:5]}
val val val val

B0[9:5] R0[4:0] B1[9:5] R1[4:0] B2[9:5] R0[4:0] Bn-1[9:5] Rn-1[4:0] Bn[9:5] Rn[4:0]
D[11:7] val
{Cb0[9:5]} {Cr0[4:0]} {Cb1[9:5]} {Cr1[4:0]} {Cb2[9:5]} {Cr2[4:0]} {Cbn-1[9:5]} {Crn-1[4:0]} {Cbn[9:5]} {Crn[4:0]}
val val val val

B0[4:0] G0[9:5] B1[4:0] G1[9:5] B2[4:0] G0[9:5] Bn-1[4:0] Gn-1[9:5] Bn[4:0] Gn[9:5]
D[6:2] val
{Cb0[4:0]} {Y0[9:5]} {Cb1[4:0]} {Y1[9:5]} {Cb2[4:0]} {Y2[9:5]} {Cbn-1[4:0]} {Yn-1[9:5} {Cbn[4:0} {Yn[9:5]}
val val val val

IDCK

HSYNC,
VSYNC

Figure 6.23. 10-Bit Color Depth 4:4:4 Dual Edge Timing

blank Pixel 0 Pixel 1 Pixel 2 Pixel n - 1 Pixel n blank blank

G0[5:0] R0[11:6] G1[5:0] R1[11:6] G2[5:0] R2[11:6] Gn-1[5:0] Rn-1[11:6] Gn[5:0] Rn[11:6]
D[17:12] val
{Y0[5:0]} {Cr0[11:6]} {Y1[5:0]} {Cr1[11:6]} {Y2[5:0]} {Cr2[11:6]} {Yn-1[5:0]} {Crn-1[11:6]} {Yn[5:0]} {Crn[11:6]}
val val val val

B0[11:6] R0[5:0] B1[11:6] R1[5:0] B2[11:6] R2[5:0] Bn-1[11:6] Rn-1[5:0] Bn[11:6] Rn[5:0]
D[11:6] val
{Cb0[11:6]} {Cr0[5:0]} {Cb1[11:6]} {Cr1[5:0]} {Cb2[11:6]} {Cr2[5:0]} {Cbn-1[11:6]} {Crn-1[5:0]} {Cbn[11:6]} {Crn[5:0]}
val val val val

B0[5:0] G0[11:6] B1[5:0] G1[11:6] B2[5:0] G2[11:6] Bn-1[5:0] Gn-1[11:6] Bn[5:0] Gn[11:6]
D[5:0] val
{Cb0[5:0]} {Y0[11:6]} {Cb1[5:0]} {Y1[11:6]} {Cb2[5:0]} {Y2[11:6]} {Cbn-1[5:0]} {Yn-1[11:6]} {Cbn[5:0]} {Yn[11:6]}
val val val val

IDCK

HSYNC,
VSYNC

Figure 6.24. 12-Bit Color Depth 4:4:4 Dual Edge Timing

SiI-DS-1084-D 45
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

blank Pixel 0 Pixel 1 Pixel 2 Pixel n - 1 Pixel n blank blank

G0[7:0] R0[15:8] G1[7:0] R1[15:8] G2[7:0] R2[15:8] Gn-1[7:0] Rn-1[15:8] Gn[7:0] Rn[15:8]
D[23:16] val
{Y0[7:0]} {Cr0[15:8]} {Y1[7:0]} {Cr1[15:8]} {Y2[7:0]} {Cr2[15:8]} {Yn-1[7:0]} {Crn-1[15:8]} {Yn[7:0]} {Crn[15:8]}
val val val val

B0[15:8] R0[7:0] B1[15:8] R1[7:0] B2[15:8] R0[7:0] Bn-1[15:8] Rn-1[7:0] Bn[15:8] Rn[7:0]
D[15:8] val
{Cb0[15:8]} {Cr0[7:0]} {Cb1[15:8]} {Cr1[7:0]} {Cb2[15:8]} {Cr2[7:0]} {Cbn-1[15:8]} {Crn-1[7:0]} {Cbn[15:8]} {Crn[7:0]}
val val val val

B0[7:0] G0[15:8] B1[7:0] G1[15:8] B2[7:0] G0[15:8] Bn-1[7:0] Gn-1[15:8] Bn[7:0] Gn[15:8]
D[7:0] val
{Cb0[7:0]} {Y0[15:8]} {Cb1[7:0]} {Y1[15:8]} {Cb2[7:0]} {Y2[15:8]} {Cbn-1[7:0]} {Yn-1[15:8} {Cbn[7:0} {Yn[15:8]}
val val val val

IDCK

HSYNC,
VSYNC

Figure 6.25. 16-Bit Color Depth 4:4:4 Dual Edge Timing

46 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

7. Design Recommendations

7.1. Power Supply Decoupling

Designers should include decoupling and bypass capacitors at each power pin in the layout. Figure 7.1 shows this
schematically. Figure 7.2 shows a representative layout of the various types of power connections on the transmitter.
Connections in any one group, such as all the CVCC12 pins, can share C2, C3, and the ferrite. Locate a separate C1 as
close as possible to the VCC pin. The recommended impedance of the ferrite is 10  or more in the frequency range of
1 MHz to 2 MHz.

3.3 V
L1
VCC Pin

C1 C2 C3
GND

Figure 7.1. Decoupling and Bypass Schematic

VCC

C1 C2 L1

VCC

Ferrite

GND C3

Via to GND

Figure 7.2. Decoupling and Bypass Capacitor Placement

7.2. Power Supply Sequencing

All power supplies in the SiI9136-3/SiI1136 transmitter are independent. However, identical supplies must be provided
at the same time. Independent supplies do not have any sequencing requirements.

7.3. ESD Recommendations

The SiI9136-3/SiI1136 transmitter can withstand electrostatic discharges due to handling during manufacture up to 4
kV HBM. In applications where higher protection levels are required, ESD-limiting components can be placed on the
pins of the device. These components typically have a capacitive effect that reduces the signal quality on the
differential lines at higher clock frequencies, so use the lowest capacitance devices possible on these lines. In no case
should the capacitance value exceed 1 pF.

SiI-DS-1084-D 47
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

7.4. High-Speed TMDS Signals

7.4.1. Layout Guidelines
These layout guidelines help to ensure signal integrity. Lattice Semiconductor encourages the board designer to follow
these guidelines as closely as possible.
 Locate the output connector that carries the TMDS signals as close as possible to the device.
 Route the differential lines as directly as possible from the connector to the device pins.
 Route the two traces of each differential pair together.
 Minimize the number of vias through which the signal lines pass.
 Lay out the two traces of each differential pair with a controlled differential impedance of 100 Ω.
Because Lattice Semiconductor devices are tolerant of skews between differential pairs, spiral skew compensation for
path length differences is not required.

7.4.2. TMDS Output Recommendation

The SiI9136-3/SiI1136 transmitter is capable of sending frequencies of up to 300 MHz over the TMDS clock line.
If the output of the transmitter is connected to an HDMI connector, the output port must be HDMI-compliant. The
TMDS output is designed to give the maximum horizontal eye opening by speeding up the rise and fall time to the
minimum value of 75 ps allowed by the HDMI Specification. Depending on the design layout and with light loading, it is
possible to see rise times slightly faster than 75 ps. Adding components such as common mode filters and ESD
suppression devices slows down the rise and fall time to well within the specification. If these components are not in
the design, adding a discrete capacitor of approximately 1 pF from each of the differential signal traces to ground can
solve this compliance issue.
The following external components have been tested for output compliance. Components with similar capacitance can
also be used:
 Common mode filter: TDK ACM2012H
 ESD suppression diode: Semtech RClamp0524P. Semtech also makes a pin-compatible device, Semtech SRV05, that
Lattice Semiconductor has not tested but for which similar compliance performance is expected.

7.4.3. EMI Considerations

Electromagnetic interference is a function of board layout, shielding, operating voltage and frequency, and so on.
When attempting to control emissions, do not place any passive components on the differential signal lines, except for
the ESD protection described earlier. The differential signals used in HDMI are inherently low in EMI if the routing
recommendations noted in the Layout Guidelines section are followed.
The PCB ground plane should extend unbroken under as much of the transmitter chip and associated circuitry as
possible, with all ground signals of the chip using a common ground.

48 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

8. Packaging

8.1. ePad Requirements

The SiI9136-3/SiI1136 HDMI Deep Color Transmitter chip is packaged in a 100-pin, 14 mm x 14mm TQFP package with
an ePad that is used for the electrical ground of the device and for improved thermal transfer characteristics. The ePad
dimensions are 5 mm x 5 mm ±0.20 mm. Soldering the ePad to the ground plane of the PCB is required to meet
package power dissipation requirements at full speed operation, and to correctly connect the chip circuitry to electrical
ground. A clearance of at least 0.25 mm should be designed on the PCB between the edge of the ePad and the inner
edges of the lead pads to avoid the possibility of electrical shorts.
The thermal land area on the PCB may use thermal vias to improve heat removal from the package. These thermal vias
also double as the ground connections of the chip and must attach internally in the PCB to the ground plane. An array
of vias should be designed into the PCB beneath the package. For optimum thermal performance, the via diameter
should be 12 mils to 13 mils (0.30 mm to 0.33 mm) and the via barrel should be plated with 1-ounce copper to plug the
via. This design helps to avoid any solder wicking inside the via during the soldering process, which may result in voids
in solder between the pad and the thermal land. If the copper plating does not plug the vias, the thermal vias can be
tented with solder mask on the top surface of the PCB to avoid solder wicking inside the via during assembly. The
solder mask diameter should be at least 4 mils (0.1 mm) larger than the via diameter.
Package stand-off when mounting the device also needs to be considered. For a nominal stand-off of approximately
0.1 mm the stencil thickness of 5 mils to 8 mils should provide a good solder joint between the ePad and the thermal
land.

8.2. PCB Layout Guidelines

PCB layout designers should refer to Lattice Semiconductor Application Note PCB Layout Guidelines: Designing with
Exposed Pads (SiI-AN-0129) for basic design guidelines when designing with thermally enhanced packages using ePad.

SiI-DS-1084-D 49
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

8.3. Package Dimensions

These drawings are not to scale.

D
D1
5.00 ± 0.20
100 76

R1
75
R2
GAGE PLANE
PIN 1 .25

5.00 ± 0.20
IDENTIFIER
S
E1 E
L
L1

Detail A
25 51

26 50
e b
See Detail A

A A2
A1 C
ccc C

Figure 8.1. 100-Pin Package Diagram

JEDEC Package Code MS-026
Item Description Min Typ Max Item Description Min Typ Max
A Thickness — — 1.20 C Lead thickness 0.09 — 0.20
A1 Stand-off 0.05 — 0.15 e Lead pitch 0.50 BSC
A2 Body thickness 0.95 1.00 1.05 L Lead foot length 0.45 0.60 0.75
D Footprint 16.00 BSC L1 Total lead length 1.00 REF
E Footprint 16.00 BSC R1 Lead radius, inside 0.08 — —
D1 Body size 14.00 BSC R2 Lead radius, outside 0.08 — 0.20
E1 Body size 14.00 BSC S Lead horizontal run 0.20 — —
b Lead width 0.17 0.22 0.27 ccc Lead coplanarity 0.08
Dimensions given in mm.

50 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

8.4. Marking Specification

This marking drawing is not to scale.

Logo

SiI9136CTU Silicon Image Part Number

Pin 1 location
LLLLLL.LL-L Lot # (= Job#)
YYWW Date code
XXXXXXX
-3 Post top marking

SiIxxxxrpppp-sXXXX
Product
Designation Special
Designation
Revision
Speed
Package Type

Figure 8.2. Marking Diagram

SiI9136/1136CTU
DATECODE
Region/Country of Origin @
Pin 1 Indicator

Figure 8.3. Alternate Topside Marking

8.5. Ordering Information

Production Part Numbers: Device Part Number
Standard SiI9136CTU-3
Non-HDCP SiI1136CTU

The universal package can be used in lead-free and ordinary process lines.

SiI-DS-1084-D 51
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

References

Standards Documents
This is a list of standards abbreviations appearing in this document, and references to their respective specifications
documents.
Abbreviation Standards publication, organization, and date
HDMI High Definition Multimedia Interface, Revision 1.4a, HDMI Consortium, March 2010
HCTS HDMI Compliance Test Specification, Revision 1.4a, HDMI Consortium, March 2010
HDCP High-bandwidth Digital Content Protection, Revision 1.4, Digital Content Protection, LLC; July 2009
E-EDID Enhanced Extended Display Identification Data Standard, Release A Revision 1, VESA; Feb. 2000
E-DID IG VESA EDID Implementation Guide, VESA, June 2001
CEA-861-D A DTV Profile for Uncompressed High Speed Digital Interfaces, EIA/CEA; July 2006
EDDC Enhanced Display Data Channel Standard, Version 1.1, VESA; March 2004
ITU-R BT.601 Studio encoding parameters of digital television for standard 4:3 and wide screen 16:9 aspect ratios, International
Telecommunications Union, January 2007
ITU-R BT.656 Interface for digital component video signals in 525-line and 625-line television systems operating at the 4:2:2 level
of Recommendation ITU-R BT.601, International Telecommunications Union, December 2007
ITU-R BT.709 Parameter values for the HDTV standards for production and international programme exchange, International
Telecommunications Union, April 2002
IEC 61966-2-4 Multimedia systems and equipment - Colour measurement and management - Part 2-4: Colour management -
Extended-gamut YCC colour space for video applications – xvYCC, International Electrotechnical Commission,
January 2006
ACPI Advanced Configuration and Power Interface, Revision 4.0, Hewlett-Packard/Intel/Microsoft/Phoenix/
Toshiba, June, 2009
BTA T-1004 Video Signal Interfaces for EDTV-II Studio Equipment, Version 1.0, ARIB; June 1995

Standards Groups
For information on the specifications that apply to this document, contact the responsible standards groups appearing
on this list.
Standards Organization Web URL
ANSI/EIA/CEA http://global.ihs.com
VESA http://www.vesa.org
HDCP http://www.digital-cp.com
DVI http://www.ddwg.org
HDMI http://www.hdmi.org
ITU http://www.itu.int
IEC http://www.iec.org
ARIB http://www.arib.or.jp

Lattice Semiconductor Documents

This is a list of the related documents that are available from your Lattice Semiconductor sales representative. The
Programmer’s Reference requires an NDA with Lattice Semiconductor.
Document Title
SiI-PR-1032 Transmitter Programming Interface (TPI) Programmer Reference
SiI-PR-0041 CEC Programming Interface (CPI) Programmer Reference
SiI-AN-1029 PCB Layout Guidelines: Designing with Exposed Pads
SiI-PR-1018 Repeater Programming Interface (RTPI) Programmer Reference
SiI-UG-1068 CP9136-3/CP1136 Transmitter/Repeater Starter Kit User Guide

52 SiI-DS-1084-D
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

Technical Support
For technical support questions, contact your regional sales manufacturer representative or distributor. For contact
information, visit the Lattice Semiconductor web site at www.latticesemi.com.

SiI-DS-1084-D 53
Downloaded from Arrow.com.
SiI9136-3/SiI1136 HDMI Deep Color Transmitter
Data Sheet

Revision History
Revision D, June 2017
Marking spec changed as per PCN13A16. Added Figure 8.3. Alternate Topside Marking.
Revision C, February 2016
Added SiI1136 transmitter support and updated to latest template.
Revision B, July 2013
1. Add YC Mux 480i support.
2. Update to 300 MHz maximum frequency in Deep Color Support section.
3. Update Table 19 for 4K formats.
4. Update Table 24 and Table 25 for correct order of sending Cr0 and Cb1.
Revision A, October 2010
First Production release.

54 SiI-DS-1084-D
Downloaded from Arrow.com.
7th Floor, 111 SW 5th Avenue
Portland, OR 97204, USA
T 503.268.8000
www.latticesemi.com

Downloaded from Arrow.com.

SiI DS 1084 - Public
No ratings yet
SiI DS 1084 - Public
55 pages
712856488299112view Documentdocument Id51622
No ratings yet
712856488299112view Documentdocument Id51622
55 pages
SiI9022ACNU C369574
No ratings yet
SiI9022ACNU C369574
80 pages
Sii9589 Datasheet 457
No ratings yet
Sii9589 Datasheet 457
38 pages
SiI DS 1120 Public
No ratings yet
SiI DS 1120 Public
53 pages
IC HDMI SiI9334
No ratings yet
IC HDMI SiI9334
9 pages
TC358743XBG Datasheet en 20171026
No ratings yet
TC358743XBG Datasheet en 20171026
18 pages
AD9393
No ratings yet
AD9393
40 pages
165 MHZ, High Performance Hdmi Transmitter: Data Sheet
No ratings yet
165 MHZ, High Performance Hdmi Transmitter: Data Sheet
12 pages
Efrevf
No ratings yet
Efrevf
7 pages
IT6633E-P: Preliminary Datasheet
No ratings yet
IT6633E-P: Preliminary Datasheet
8 pages
Adv 7623
No ratings yet
Adv 7623
16 pages
MIPI/DSI Receiver With HDMI Transmitter: Data Sheet
No ratings yet
MIPI/DSI Receiver With HDMI Transmitter: Data Sheet
12 pages
10 Ecb 8 e 5
No ratings yet
10 Ecb 8 e 5
45 pages
9655 It66332e
No ratings yet
9655 It66332e
11 pages
TC358870XBG Datasheet en 20171025 PDF
No ratings yet
TC358870XBG Datasheet en 20171025 PDF
21 pages
SID-X2N Datasheet
No ratings yet
SID-X2N Datasheet
3 pages
Sii9233A Hdmi Receiver With Repeater, Multi-Channel Audio, and Deep Color
No ratings yet
Sii9233A Hdmi Receiver With Repeater, Multi-Channel Audio, and Deep Color
9 pages
MCDP2800 MegaChips
No ratings yet
MCDP2800 MegaChips
33 pages
4:1 HDMI/DVI Switch With Equalization, DDC/CEC Buffers and EDID Replication
No ratings yet
4:1 HDMI/DVI Switch With Equalization, DDC/CEC Buffers and EDID Replication
28 pages
Hitachi L37v01e A U l37vr1 l37v01 l37vp01 l42vp01
No ratings yet
Hitachi L37v01e A U l37vr1 l37v01 l37vp01 l42vp01
68 pages
Adv 7513
No ratings yet
Adv 7513
12 pages
TC358840XBG
No ratings yet
TC358840XBG
21 pages
Confidential For Digikits Technologies Internal Use Only: HDMI 1.4 3-In 1-Out Repeater/Switch/MCU Combo EP92A2E
No ratings yet
Confidential For Digikits Technologies Internal Use Only: HDMI 1.4 3-In 1-Out Repeater/Switch/MCU Combo EP92A2E
21 pages
Controlador de HDMI TV LCD Sharp BU16028KV
No ratings yet
Controlador de HDMI TV LCD Sharp BU16028KV
18 pages
Single-Link HDMI 1.4 Receiver With 3D Support: Jul-2010 Rev:0.7 1/36
No ratings yet
Single-Link HDMI 1.4 Receiver With 3D Support: Jul-2010 Rev:0.7 1/36
36 pages
Adv 7611
No ratings yet
Adv 7611
16 pages
Hardware User'S Guide: Low-Power HDMI 1.4a Transmitter
No ratings yet
Hardware User'S Guide: Low-Power HDMI 1.4a Transmitter
46 pages
ADV7511W Hardware Guide
No ratings yet
ADV7511W Hardware Guide
45 pages
IT66121FN
No ratings yet
IT66121FN
39 pages
Toshiba, Tc358779xbg, 7.2gbps, Ultra HD Hdmi 1.4b RX To Mipi Dsi TX, Rev1.1, 2017-11-13
No ratings yet
Toshiba, Tc358779xbg, 7.2gbps, Ultra HD Hdmi 1.4b RX To Mipi Dsi TX, Rev1.1, 2017-11-13
18 pages
Engineering Training for LCD TVs
No ratings yet
Engineering Training for LCD TVs
47 pages
SHARP LC-26D44 & LC32D44 Training Course (English)
0% (1)
SHARP LC-26D44 & LC32D44 Training Course (English)
47 pages
IT6263 Datasheet v0.8
No ratings yet
IT6263 Datasheet v0.8
16 pages
Sii9127 PDF
No ratings yet
Sii9127 PDF
2 pages
UM2048 User Manual: DSI To HDMI Adapter Board For STM32 Development Tools
No ratings yet
UM2048 User Manual: DSI To HDMI Adapter Board For STM32 Development Tools
12 pages
STDP93xx 92xx 73xx Datasheet
100% (1)
STDP93xx 92xx 73xx Datasheet
137 pages
Sil 9185 A
No ratings yet
Sil 9185 A
7 pages
M123SP Service Manual
100% (2)
M123SP Service Manual
57 pages
Manual de Servicio Kalley
No ratings yet
Manual de Servicio Kalley
57 pages
Daewoo Osdtd29n001
No ratings yet
Daewoo Osdtd29n001
21 pages
VG 6640
No ratings yet
VG 6640
126 pages
Panasonic Th-32f312m Chassis Sy56d
No ratings yet
Panasonic Th-32f312m Chassis Sy56d
36 pages
LC786960E
No ratings yet
LC786960E
24 pages
IT66121FN Datasheet v1.02
No ratings yet
IT66121FN Datasheet v1.02
40 pages
1318 035488 Tda8366 Philips
No ratings yet
1318 035488 Tda8366 Philips
48 pages
MN82832 3D Y/C Separation LSI Data Sheet
No ratings yet
MN82832 3D Y/C Separation LSI Data Sheet
4 pages
PI3VDP612-A DP To DP and HDMI Source Application Note: Pericom Semiconductor Corp. Page 1 of 6 11/4/2011 Rev 1.0
No ratings yet
PI3VDP612-A DP To DP and HDMI Source Application Note: Pericom Semiconductor Corp. Page 1 of 6 11/4/2011 Rev 1.0
6 pages
17MB26 Servismanual
No ratings yet
17MB26 Servismanual
61 pages
Ths 8200
No ratings yet
Ths 8200
100 pages
ST6391, ST6392, ST6393 ST6395, ST6397, ST6399: Data Sheet
No ratings yet
ST6391, ST6392, ST6393 ST6395, ST6397, ST6399: Data Sheet
68 pages
Gid1370Pdf - CH7210 Brief Datasheet - Rev 0.4
No ratings yet
Gid1370Pdf - CH7210 Brief Datasheet - Rev 0.4
9 pages
AD9974 - Analog Devices
No ratings yet
AD9974 - Analog Devices
52 pages
AMT630A: Confidential
No ratings yet
AMT630A: Confidential
12 pages
Diagrama
No ratings yet
Diagrama
14 pages
TDA8366
100% (1)
TDA8366
48 pages
PTN3361B: 1. General Description
No ratings yet
PTN3361B: 1. General Description
29 pages
Sffs 310 A
No ratings yet
Sffs 310 A
12 pages
Slvae 12 e
No ratings yet
Slvae 12 e
3 pages
ITC 2002 Credence
No ratings yet
ITC 2002 Credence
7 pages
Can All Asic
No ratings yet
Can All Asic
3 pages
DAI0350A Coremark Benchmarking
No ratings yet
DAI0350A Coremark Benchmarking
15 pages
ISO26262 Compliant Safe Computing For 3-Phase Motor Control: International TÜV Rheinland Symposium in China
No ratings yet
ISO26262 Compliant Safe Computing For 3-Phase Motor Control: International TÜV Rheinland Symposium in China
27 pages
Event Log Windows 1000
No ratings yet
Event Log Windows 1000
36 pages
Cricut Kickoff Workbook v4 JenniferMaker
No ratings yet
Cricut Kickoff Workbook v4 JenniferMaker
52 pages
Data Science & Generative AI Technologies
100% (1)
Data Science & Generative AI Technologies
97 pages
AIrtel Xstream Fiber Plans and Details - 3300
No ratings yet
AIrtel Xstream Fiber Plans and Details - 3300
8 pages
JA - Jupiter Automation Company Profile
No ratings yet
JA - Jupiter Automation Company Profile
3 pages
Examples of Gaps in Literature Review
100% (2)
Examples of Gaps in Literature Review
4 pages
Open Book Cat
No ratings yet
Open Book Cat
7 pages
MSI H110M PRO-VD (VH) MS-7996 r1.0
100% (2)
MSI H110M PRO-VD (VH) MS-7996 r1.0
47 pages
Thermocouple Accuracies - Thermocouple Accuracy - Thermocouple Accuracy Comparison Chart
No ratings yet
Thermocouple Accuracies - Thermocouple Accuracy - Thermocouple Accuracy Comparison Chart
2 pages
Effect of Internal External Shear Wall On Performa
No ratings yet
Effect of Internal External Shear Wall On Performa
7 pages
Motor & Gearbox Selection Guide
No ratings yet
Motor & Gearbox Selection Guide
15 pages
Image Encryption by Using Gyrator Transform and Arnold Transform
No ratings yet
Image Encryption by Using Gyrator Transform and Arnold Transform
6 pages
BCNF Program Grow Your Audience On Facebook and Instagram
No ratings yet
BCNF Program Grow Your Audience On Facebook and Instagram
14 pages
Ecosoft Catalog 2024 ENG
No ratings yet
Ecosoft Catalog 2024 ENG
124 pages
Boiler Erection Method Statement
No ratings yet
Boiler Erection Method Statement
10 pages
Computer Parts and Accessories Price List
No ratings yet
Computer Parts and Accessories Price List
3 pages
Adb Commands
No ratings yet
Adb Commands
7 pages
Coursedog Real-Time Sync Guide
No ratings yet
Coursedog Real-Time Sync Guide
1 page
Best Practice Guide To Implementing The Least Privilege Principle
No ratings yet
Best Practice Guide To Implementing The Least Privilege Principle
9 pages
DLD Project Report
No ratings yet
DLD Project Report
4 pages
13 - Implementation of LZW Algorithm For Binary Lossless Data Compression
No ratings yet
13 - Implementation of LZW Algorithm For Binary Lossless Data Compression
6 pages
Four Levels of Measurement in Stats
No ratings yet
Four Levels of Measurement in Stats
7 pages
Automated Wall Plastering Design
No ratings yet
Automated Wall Plastering Design
6 pages
Substation Testing & Maintenance Guide
No ratings yet
Substation Testing & Maintenance Guide
8 pages
Big Data Storage Techniques For Spatial Databases: Implications of Big Data Architecture On Spatial Query Processing
No ratings yet
Big Data Storage Techniques For Spatial Databases: Implications of Big Data Architecture On Spatial Query Processing
27 pages
10b Comparison Table
No ratings yet
10b Comparison Table
1 page
S05 121,+ (779+to+783)
No ratings yet
S05 121,+ (779+to+783)
5 pages
307 Shyam Ip
No ratings yet
307 Shyam Ip
15 pages
Management Information System Two Prof Bayo Okunade Ed Download
No ratings yet
Management Information System Two Prof Bayo Okunade Ed Download
43 pages
Downgrade iPhone 3.1 to 3.0.1 Guide
No ratings yet
Downgrade iPhone 3.1 to 3.0.1 Guide
4 pages