Scribd
Upload
52 views3 pages

HL-IL (Inset Light 2023)

Microlux Lighting offers the HL-IL Heliport Inset LED Light, designed for marking and illuminating helipads to enhance safety during night operations and adverse weather. The light features robust aluminum construction, long-lasting LEDs, and complies with various aviation standards, including FAA and ICAO requirements. It is available in multiple colors and voltage options, with additional features such as marine treatment and dimming capabilities.

Uploaded by

sales2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
52 views3 pages

HL-IL (Inset Light 2023)

Microlux Lighting offers the HL-IL Heliport Inset LED Light, designed for marking and illuminating helipads to enhance safety during night operations and adverse weather. The light features robust aluminum construction, long-lasting LEDs, and complies with various aviation standards, including FAA and ICAO requirements. It is available in multiple colors and voltage options, with additional features such as marine treatment and dimming capabilities.

Uploaded by

sales2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

MICROLUX LIGHTING

MICROLUX SPAIN
Heliport Inset LED Light
Model: HL-IL

Calle Diputacion 231


08007 Barcelona
Spain
Teléfono: (34) 632 234051
Fax: (34) 96 353 52 89
www.microluxlighting.com
[email protected]
MICROLUX LIGHTING

Compliances:
FAA AC 150/5390-2B Heliport Design Guide
ICAO Annex 14, Volume II
Transport Canada TP14371
Quality Assurance: ISO9001:2015
Tested & Certified to IP67 Ingress Protection

Application:
Perimeter Inset lights are one of the most important safety features on helipad. They are used to mark and
illuminate the FATO (Final Approach Take-Off) and TLOF (Touchdown Lift-Off) as well as to help the pilot to
locate the helipad and safety land during night operations and bad weather conditions.

The HL-IL Light is used for heliport and small airport applications where an inset light is required. The light is
an omni-directional steady burning light. The light uses long life LEDs and may be relamped without removing
the fixture from its mounting base. The light is prewired with cable that enters via a watertight compression
fitting.

Specifications: Marine Treated Light

 Body: Robust aluminum alloy construction 4 * 316SS Bolt


 Corrosion resistant anodized finish
 Prism (Lens): Borosilicate glass, heat resistant
 Prism replacement achieved without need for adhesives or sealants
 LED Lifespan: >100,000 hours
 Power Consumption: <10W
 Voltage: AC110V~ 240V, DC6V, DC24V (on request DC48V)
 Operating Mode: Steady Burning Cable Gland
 Temperature: -30°C ~ +55°C
 Ingress Protection (IP): 67
 2-way (IN-OUT) cable entry with IP67 cable gland
 Dimension: 203 mm (8 inch) x 146 mm (5.75 inch)
 Weight: 4.8kg
 The entire fixture is fully machined & double gasketed for weather proofness, to make it weather tight.
 Option MT: Marine Treatment: The fixture shall be treated for marine conditions by cleaning per US
Department of Defense TT-C-490 method III, chromate pre-treated with epoxy powder base coat
primer and glossy polyester powder coat finish in RAL6003 (FED-STD-595 color#14097) dark green.
 Option Dimming: With our Dimming Controller option, the lights can be dimmed at night to reduce
glare - select from three brightness levels. Dimmable lights are available in 6VDC.
MICROLUX LIGHTING

Design:

Photometric Comparison with ICAO Requirements:

Vertical Angle Avg. Intensity ICAO Spec


(Deg) (CD) (CD)

2 >67.6 >15
5 >62.5 >30
10 >42.3 >15
13 >35.4 >8
20 >22.7 >3

Ordering-codes:

Fixture Output Voltage Options


HL-IL G: Green 1: AC120V +- 10% MT: Marine Treated
B: Blue 2: AC240V +- 10% DIM: Dimming 3-levels
C: Clear (white) 3: DC12V (100% - 60% - 10%)
R: Red 4: DC24V Note: Voltage DC6V
Y: Yellow 5: DC6V IR: Infrared LEDs
* Green is currently the recommended color for heliport perimeter light.
* We recommended to use shallow base for water protection.

You might also like