Scribd
Upload
214 views1 page

Apl Apollo Tubes LTD.: Manufacture Test Certificate For Steel Tubes, Tubulars and Other Wrought Steel Fittings

APL Apollo Tubes Ltd. certifies that their steel tubes conform to IS 1239: 2004 standards regarding chemical composition and mechanical properties, as detailed in test certificate No. APL/QA/2023-24/853 dated 05.01.2024. The document includes test results for two sizes of galvanized steel tubes, confirming successful tests for tensile strength, elongation, and galvanizing uniformity. Additionally, it states that each tube has been hydrotested at a pressure of 5 Mpa.

Uploaded by

sangmeshsajjan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
214 views1 page

Apl Apollo Tubes LTD.: Manufacture Test Certificate For Steel Tubes, Tubulars and Other Wrought Steel Fittings

APL Apollo Tubes Ltd. certifies that their steel tubes conform to IS 1239: 2004 standards regarding chemical composition and mechanical properties, as detailed in test certificate No. APL/QA/2023-24/853 dated 05.01.2024. The document includes test results for two sizes of galvanized steel tubes, confirming successful tests for tensile strength, elongation, and galvanizing uniformity. Additionally, it states that each tube has been hydrotested at a pressure of 5 Mpa.

Uploaded by

sangmeshsajjan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

APL APOLLO TUBES LTD.

IS:1239
Format No:F/QA/10
Manufacturer of : ERW GALVANIZED, BLACK STEEL TUBES, PIPES & HOLLOW SECTIONS Rev No: 00
Effe. Date: 01/05/2017
CM/L- 5900046216

Vill- Bendri, Near- Urla Industrial Area, Raipur (Chattisgarh)


MANUFACTURE TEST CERTIFICATE FOR STEEL TUBES, TUBULARS AND OTHER WROUGHT STEEL FITTINGS

M/s APL APOLLO TUBES LTD,Pune Test certificate No.APL/QA/2023-24/853


Certificate Date : 05.01.2024
Invoice No :2395611153
We certify that material described below fully confirms to IS 1239: 2004 Chemical composition & Mechanical properties of the products tested in accordance with the scheme of testing and inspection
contained in BIS certification mark license No. CM/L- 5900046216 as indicate against each order No. etc

TEST RESULTS
CHEMICAL COMPOSITION MECHANICAL PROPERTIES GALVANIZING
Mass of
SIZE Length Quantity Tensile Flattening
Sr. No. Type/Series Batch No. Elongation Zinc Uniformity Remarks
NB (mm) (PCS.) C% Mn% S% P% Strength /Bend
% Coating Test
Mpa test (g/m²)
1 25 NB GI/ HEAVY/ P/E 6000 23428018 600 0.051 0.35 0.004 0.015 375 27 OK 402 OK OK
2 40 NB GI/ HEAVY/ P/E 6000 49320781 593 0.045 0.36 0.009 0.016 375 28 OK 395 OK OK

1. This is to certify that dimensional characteristic (outside diameter / thickness / straightness / length / end condition) and workmanship
confirms the requirement of IS 1239 : 2004
2. It is certified that each steel tubes is Hydrotested at a pressure of 5 Mpa = 51 Kg/cm² SIGNATURE OF AUTHORISED SIGNATORY
For APL APOLLO TUBES LTD

You might also like