Scribd
Upload
59 views1 page

ULC-R Line Card for SatCom Networks

The ULC-R line card features multi-channel Adaptive TDMA demodulation with a maximum symbol/chip rate of 29 Msps/Mcps, supporting efficient inbound FEC for various applications. It is compatible with both ST Engineering iDirect Evolution and Velocity platforms, and can also operate in a proprietary BPSK mode for low data rate communication. The card includes multiple interfaces and operates within a temperature range of 0° to +45°C, with a weight of 0.83 kg.

Uploaded by

bedo79476
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
59 views1 page

ULC-R Line Card for SatCom Networks

The ULC-R line card features multi-channel Adaptive TDMA demodulation with a maximum symbol/chip rate of 29 Msps/Mcps, supporting efficient inbound FEC for various applications. It is compatible with both ST Engineering iDirect Evolution and Velocity platforms, and can also operate in a proprietary BPSK mode for low data rate communication. The card includes multiple interfaces and operates within a temperature range of 0° to +45°C, with a weight of 0.83 kg.

Uploaded by

bedo79476
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ULC-R Line Card

The universal receive line card, ULC-R, features multi-channel Adaptive TDMA demodulation for inbound traffic with an aggregate
symbol/chip rate of up to 29 Msps/Mcps. In conjunction with a modulator line card (e.g. ULC-T), the ULC-R supports efficient
inbound FEC with 2D 16-State coding, making it ideally suited for voice, video and data applications in enterprise and mobility
networks on both the ST Engineering iDirect Evolution and Velocity platforms. The ULC-R line card can also be configured
alternatively to support a proprietary BPSK spread spectrum waveform to enable low data rate communication in conjunction with
the iDirect portfolio of Fixed/Dynamic IoT Terminals available in either Ku-Band/Ka-Band variants.

Network Configuration Interfaces

Network Technology Adaptive TDMA (ATDMA), IoT** SatCom Interfaces


Modem ATDMA: Demod up to 16 channels RxIF In: Type-F, 950–2000 MHz, -5dBm (max) composite,
IoT**: Demod up to 1 channel -130+10*log(Fsym)dBm (min) single carrier
Modulation ATDMA: SS-BPSK (SF:2/4/8), BPSK, RxIF Out: Type-F (Monitor)
QPSK, 8PSK, 16 QAM*, 5% & 20% Data Interfaces
Roll-off factor*
GigE LAN A: Data & Control; GigE LAN B: Data & Control. Link
IoT**: BPSK, 35% Roll-off factor Aggregation.
FEC ATDMA: 2D 16-State 1/3-9/10* Console: RS232 over RJ-45
IoT**: Turbo 1/3 Timing Interface
Carrier Parameters ATDMA: Locked to customer supplied PPS/10 MHz through backplane
Symbol Rates: 128 ksps to 29* Msps
Chip Rates: 1 Mcps to 29 Mcps
Maximum Aggregate symbol/chip Mechanical & Environmental
rate: 29 Msps/Mcps
IoT**:
Chip Rates: 110 Kcps - 3125 Kcps; Redundancy Software controlled, hot-swappable, and
Spread factors 5 to 64 auto-failover

Interoperability Weight 0.83 kg (1.48 lbs)

Compatible with Series 15100 Universal Hub (5IF/20 Slot) Operating 0° to +45°C (+32° to +113°F)
ATDMA Modulation and Carrier Parameter availability based on Temperature
software release. Humidity 0–95% non condensing
*Requires suitable Evolution software. Note Velocity software
Input Voltage 24V, 65W (max)
supports up to 8PSK, 7.5 Msps/Mcps max, 20% Roll-off and code
rates 1/2 to 6/7
**IoT mode requires IoT software configuration on ULC-R

EVOLUTION
VELOCITY

ST Engineering iDirect | www.idirect.net D0000909 RevE

You might also like