Scribd
Upload
36 views4 pages

Descriere Cortine Antifoc Fara Sprinklere

The Fire-Rated Roller Shutter is designed to close openings in vertical partitions, limiting the spread of fire and gases for 90-120 minutes, facilitating safe evacuation in buildings. It features an electric drive and is constructed from fire-proof fabric and galvanized steel, with a control panel that responds to smoke detectors or fire alarms. The installation requires specific space conditions, and the product complies with harmonized standards EN 16034:2014 and EN 13241:2003+A2:2016.

Uploaded by

kasztakatika
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
36 views4 pages

Descriere Cortine Antifoc Fara Sprinklere

The Fire-Rated Roller Shutter is designed to close openings in vertical partitions, limiting the spread of fire and gases for 90-120 minutes, facilitating safe evacuation in buildings. It features an electric drive and is constructed from fire-proof fabric and galvanized steel, with a control panel that responds to smoke detectors or fire alarms. The installation requires specific space conditions, and the product complies with harmonized standards EN 16034:2014 and EN 13241:2003+A2:2016.

Uploaded by

kasztakatika
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

FIRE-RATED ROLLER SHUTTER AUTOMATIC

EI90, EI120

Fire-Rated Roller Shutter is intended for closing off


opening in vertical partitions, both internal and
external. The main purpose of the shutter is
to limit the spread of fire and the flow of
gases and heat for 90-120 minutes. Shutters
separate fire zones in buildings and enable safe
evacuation. They can be applied in public
facilities and in other types of buildings. The EI
shutter is equipped with an electric drive - a
tubular motor, usually located on the right side.

TYPES OF FIRE ROLLER SHUTTERS


EI90 – prevents the spread of fire and the flow of gases and heat streams for 90 minutes
EI120 – prevents the spread of fire and the flow of gases and heat streams for 120 minutes

GATE CONSTRUCTION
Rolling door consists of: curtain coat, shaft housing, guides, ballast strip, electric drive, control unit.

Limits the flow of flames, gases and heat


Separation of fire zones
Ensures the safe evacuation
Compact, light construction
Easy to assemble

ADDITONAL INFORMATION
The curtain gate coat is made of fire-proof fabric, which is wound on a shaft and fixed between the guides. The door is
controlled by the control panel, which starts the motor and lowers the curtain when it receives a signal from a smoke
detector or from the fire alarm system. In case of power failure, the control panel is supplied by built-in batteries. The
emergency power supply time is up to 24 hours. Shaft casing and guides of the curtain gate are made of galvanized
steel sheet as a standard. All elements made of galvanized sheet can be painted in any colour from the RAL palette.
Fasteners (screws) are made of galvanized steel, which are not painted as standard.

EI rolling fire gates are made in accordance with the harmonized standard: EN 16034:2014, EN 13241:2003+A2:2016.

www.rthc.ro [email protected] 0723 11 22 88


CONSTRUCTION CONDITIONS
EI90, EI120 automatic
The installation conditions specify the space required for the gate installation. All dimensions not shown in the terms and
conditions are to be individually.

* external drive - from the drive side, an additional 140 mm of side space should be provided

Warning:
The surface for mounting the gate, upper head box and the side guides must be vertical and even (smooth), tolerance 1mm/m.
Otherwise, the customer is obliged to level the surface before installation.
The manufacturer has the right to change the dimensions of the development during the execution of the order.
The manufacturer reserves the form of legalization of the product in case of order.

www.rthc.ro [email protected] 0723 11 22 88


EI90, EI120 automatic
POWER SUPPLY

THE CONTROL SYSTEM

www.globalsystem.com.pl [email protected]
EI90, EI120 automatic

MAIN DETAILS

So - opening width 1. Shaft housing


Ho - opening height 2. Guides
A - shaft housing depth 3. Coat
B - shaft housing height 4. Fastening

www.globalsystem.com.pl [email protected]

You might also like