630/631 F I R E K I NG
634/635
ROLLING FIRE DOOR COLLECTION
FIRE PROTECTION.
INNOVATIVE DESIGN.
OPTIMIZED PERFORMANCE.
INDUSTRY LEADING
COMMERCIAL & INDUSTRIAL SOLUTIONS
F IRE K ING ® MODELS 630/631/634/635 ROLLING FIRE DOOR COLLECTION
Standard features at a glance Options
Technical data • Between jamb mount
Application Exterior/Interior for fire rated walls • Fire Sentinel® time-delay release device
Operation Non-motorized, mechanical floor • FireLite® vision lite (Flat and insulated slats only
resettable hoist with viscous with a max of 4 per door)
governor • Smoke detectors and heat detectors
Mounting Face of wall (between jambs • UL-listed brush-type smoke seals “S” label (flat
optional) or insulated slats only)
Models 630 – Standard fire door • Flame baffle system - an FM requirement
631 – Smaller fire door • UL, ULC and FM labels available
634 – Fire door up to 24'x24'; 4 • Horns and horns with strobes
hour rating UL
• Tension release: push-up or crank, electric motor:
635 – Insulated fire door
RHX® or RSX®
Drop speed Meets NFPA 80 requirements of • Non-tension hoist or electric motor: RSX® FDO or
6" to 24" per second RHX® FK
• Stainless or galvanized steel: curtain, hood, guides,
Curtain
bottom bar
Material Steel slats in a variety of gauges
• Slide bolts, cylinder locks, interlocks
Finish Baked-on polyester top coat in Gray,
• Wind load options to include: Florida Building Code
Tan, White or Brown
(FBC), Miami-Dade, Texas Department of Insurance (TDI)
Guides Three steel angles (some use
• PowderGuard® Premium powder coat in
structural and some are roll formed)
approximately 200 RAL standard colors or color-
Bottom bar Steel double angle matched to specification
Counterbalance system • PowderGuard® Zinc and PowderGuard® Textured
finishes
Counterbalance High tensile helical torsion spring
housed in a steel tube or pipe
Brackets Steel plates to support
counterbalance, curtain and hood
Limited warranty 2-year material and workmanship Cover image: Model 630 with C187 slats, Gray powder coat finish
1-year labor Image above: Model 630 with C187 slats
2
F IRE K ING ® MODELS 630/631/634/635
Our F IRE K ING ® Rolling Fire Door Collection
offers fire protection, innovative design and optimized
performance. Additional benefits including thermal efficiency,
climate control and sound control are available with our
FireKing® Insulated Fire Door (Model 635), which provides an
R-value of 4.5; Smoke and flame index of 5 and STC of 21.
FireKing® Fire Doors come equipped with an innovative floor
reset system which allows these doors to be easily drop tested
and mechanically reset at any time without special tools.
Model 635
www.overheaddoor.com 3
F IRE K ING ® MODELS 630/631/634/635 ROLLING FIRE DOOR COLLECTION
Fire door selection chart
Series 630 631 634 635
Label
Up to 13’6” (4,115 mm) width/height, Up to 13’6” (4,115 mm) width/height, Up to 13’6” (4,115 mm) width/height, Up to 13’6” (4,115 mm) width/height,
UL/ULC/FM 1½ or 3 hr max. 152 sf (14.121 sm) max. 152 sf (14.121 sm) max. 152 sf (14.121 sm) max. 152 sf (14.121 sm)
Up to 13’6” (4,115 mm) width/height,
Up to 13’6” (4,115 mm) width/height, Up to 13’6” (4,115 mm) width/height, Up to 13’6” (4,115 mm) width/height,
UL 4 hr max. 152 sf (14.121 sm) max. 152 sf (14.121 sm)
max. 152 sf (14.121 sm)
max. 152 sf (14.121 sm)
FM 4 hour is an option
UL oversized door Over 152 sf (14.121 sm) Over 152 sf (14.121 sm) Over 152 sf (14.121 sm) Over 152 sf (14,121 sm)
Over 152 sf (14.121 sm), but less
Over 152 sf (14.121 sm), but less
FM (optional) oversized than 18’ (5,486 mm) height or Over 152 sf (14.121 sm), but less than
than 18’ (5,486 mm) height or width.
door width. Over 18' must be certified 18’ (5,486 mm high)*
Over 18' must be certified by FM*
by FM*
Applications
Masonry/steel • • • •
Non-masonry • • •
Standard
Maximum width 41'2" (12,548 mm) 14' (4,267 mm) 41’2” (12,548 mm) 24' (7,351 mm)
Maximum height 25'4" (7,722 mm) 12' (3,658 mm) 25'4" (7,722 mm) 24' (7,351 mm)
Curtain material Painted galvanized steel/stainless steel Painted galvanized steel Painted galvanized steel/stainless steel Painted galvanized steel/stainless steel
R-value** 4.5
Sound transmission class 21 STC†
Finish color Gray/Tan/White/Brown Gray/Tan/White/Brown Gray/Tan/White/Brown Gray/Tan/White/Brown
Available Options
Fire Sentinel® time-delay
release device • • • •
Smoke detectors • • • •
FireLite® vision lites • • • •
UL listed brush-type
smoke seals • • • •
Windload (FBC, TDI,
MiamiDade) • • • •
Operation options
Push-up Up to 80 sf (7.43 sm) Up to 80 sf (7.43 sm) Up to 80 sf (7.43 sm)
Chain hoist • • • •
Crank • • • •
Electric motor • • • •
Locking option
Slide locks or cylinder
locking bottom bar
w/mortise cylinder
• • • •
Finish options
Approximatly 200
powder coat
premium colors
• • • •
* FM reviews designs for openings over 18’ (5,486 mm) wide
Information is subject to change. Please call your local Overhead Door™ Distributor for special applications or if your application is not listed. All 635 Series doors are chain hoist minimum.
** R-value: Overhead Door Corporation uses a calculated door section R-value for our insulated doors.
†
Sound transmission classification.
4
F IRE K ING ® MODELS 630/631/634/635
Slat data
C-187 slat F-265 slat C-275 slat F-265i slat
2.2 LBS DENSITY
MINERAL WOOL
INSULATION
630 Face-of-wall mounted 634 Face-of-wall mounted
Slat Opening width Standard Optional Slat Opening width Standard Optional
Thru 14'0" (4,267 mm) 22 ga.* 20 or 22 ga. ss C-187 Thru 20'0" (6,096 mm) 20 ga. 18 or 20 ga. ss
C-187
Thru 20'0" (6,096 mm) 20 ga. 18 or 20 ga. ss C275 Thru 20'0" (6,096 mm) 20 ga. 18 or 20 ga. ss
C-275 Thru 14'0" (4,267 mm) 22 ga. 20,18, 16 ga. or 22, 20 ga. ss Thru 41'2" (12,548 mm) 18 ga. 16 ga.
Thru 20'0" (6,096 mm) 20 ga. 18, 16 ga. or 20 ga. ss F265 Thru 20'0" (6,096 mm) 20 ga. 18 ga. or 20 ga. ss
Thru 41'2" (12,548 mm) 18 ga. 16 ga.
Thru 41'2" (12,548 mm) 18 ga.
F-265 Thru 14'0" (4,267 mm) 22 ga.* 20 ga. or 22 ga. ss
Thru 20'0" (6,096 mm) 20 ga. 18 ga. or 20 ga. ss
635 Face-of-wall or between jamb mounted
Thru 41'2" (12,548 mm) 18 ga.
Slat Opening width Standard Optional
F265 with 24 ga. front 22 ga. front
631 Face-of-wall mounted Thru 24'0" (7,315 mm)
back cover 24 ga. back 22 ga. back
Slat Opening width Standard Optional
Slats are galvanized and painted or stainless steel (ss).
C-187 Thru 14'0" (4,267 mm) 24 ga.
* Maximum wall opening height for 22 ga. is 12’0” (3658 mm).
F265 Thru 14'0" (4,267 mm) 24 ga.
Maximum insulation
The mineral wool insulation material used in FireKing® insulated fire doors is compressed within the steel slat,
completely and uniformly filling the slat for maximum insulation. Overhead Door™ brand products provide consistent
quality in design and performance.
Color options
White Gray Tan Brown
®
PowderGuard Premium powder coat paint finish is available in approximately 200 RAL colors, or may be color
matched to architect’s specifications to best complement the look of the facility. PowderGuard® Zinc and
PowderGuard® Textured finishes are also available.
www.overheaddoor.com 5
F IRE K ING ® MODELS 630/631/634/635 ROLLING FIRE DOOR COLLECTION
Door clearance elevations
Operation: crank, chain hoist, electric
Chain hoist has only one sash chain located on drive side.
Face-of-wall mounted Between jambs mounted
* Options may effect clearance dimensions.
* Add 7” for crank operation. For more detailed information, consult your local Overhead Door™ Distributor.
Angle guide
Face-of-wall mounted Between jambs mounted
E guide
Section B-B Z guide
Section B-B Drive Side - Electric, Chain or Crank
Section B-B
Whenever expansion mounting bolts are used maintain
a minimum of 6 bolt diameters from edge of wall.
Tension side & push-up drive side
Section C-C
Whenever expansion mounting bolts are used maintain
a minimum of 6 bolt diameters from edge of wall.
6
F IRE K ING ® MODELS 630/631/634/635
Electric operators
Our broad line of electric operators suits new construction and retrofit applications, as well as unusual or special
requirements. In order to improve safety and enhance door and motor life, industry quality assurance guidelines
recommend the choice of a single manufacturer for both door and operator applications. Overhead Door®
commercial operators are UL 325 2010 compliant.
Electric operator selection guide
Model RHX® FK
Totally enclosed
Explosion proof
Continous duty
Mounting type
Model RHX® FK is a heavy duty
Max. area of
Horsepower
Super Belt™
Worm gear
Adjustable
clutch
door*
motor featuring industrial gearbox
in oil bath design. It offers unique
features like LimitLock™, dual 1/2 HP,
®
frequency radio system and 16 digit RHX
FK
3/4 HP,
1 HP,
400 sq ft
(37.161 sm) • • • • • F
menu setup. Combined with FireKing® 3 HP
fire doors this system offers a unique RSX
® 1/2 HP,
400 sq ft
FDO
3/4 HP
(37.161 sm) • • • • • F, T
floor resettable feature as well as 1 HP
providing for easy drop test and ®
1/2 HP,
480 sq ft
RHX 3/4 HP,
(44.593 sm) • • • • • F, T, W
reset of fire door within seconds. 1 HP
1/2 HP,
168 sq ft
Model RSX® FDO
®
RSX 3/4 HP
(15.608 sm) • • • • F, T, W
1 HP
Model RHX® FDO is a standard
Mounting options:
duty motor specifically for fire door F=Front of hood W= Wall mount T= Top of hood
* Based on slat profile, gauge steel and overall weight of door. Contact Distributor for
operation. While similar to RSX, appropriate motor selection.
this model has additional features
including: floor level auto reset and Safety recommendations
timed delay of door drop upon
alarm activation, automatic door We strongly recommend the use of interlock
open upon alarm reset, battery switches and an electric safety edge for all electrically
back-up and mechanical braking operated rolling service doors. If a sensing edge or
system. other reversing device is not installed, a constant-
contact control switch must be used to close the
Model RHX® door. We recommend a self-mounting, four-wire,
Model RHX® is a heavy duty fail-safe electric sensing device as defined by UL 325
commercial operator designed to 2010. Contact your Overhead Door™ Distributor for
operate doors up to 24' (7,315 mm) more information.
in height and 3696 pounds (1676
kg). Available as either a trolley, With the optional selection of a commercial operator
sidemount or centermount. for the Fire Door system the floor resettable chain
hoist is not available.
Model RSX® The automatic closing of the door must
Model RSX® is a standard duty be tested at the time the door is installed,
commercial operator designed to and the door shall be inspected and tested
operate doors up to 24' (7,315 mm) not less than annually as required by NFPA
in height and 1620 pounds (735 80. This requirement applies to all fire doors – even
kg). It offers unique features like those that are not used and remain in the closed
LimitLock®, SuperBelt™ and 16 digit position. The doors must be checked regularly for
menu setup. conditions that may affect the operation of the door.
www.overheaddoor.com 7
Architect's Corner
A resource for architects, containing comprehensive
technical and resource materials to support your
project, including drawings and specifications for
commercial doors.
www.overheaddoor.com
The original, innovative choice for unequalled quality and service.
Overhead Door Corporation pioneered the upward-acting door industry, inventing the first upward-acting door
in 1921 and the first electric door operator in 1926. Today, we continue to be the industry leader through the
strength of our product innovation, superior craftsmanship and outstanding customer support, underscoring a
legacy of quality, expertise and integrity. That’s why design and construction professionals specify Overhead
Door™ products more often than any other brand. Our family of over 400 Overhead Door™ Distributors across
the U.S. and Canada not only share our name and logo, but also our commitment to excellence.
INDUSTRY LEADING
COMMERCIAL & INDUSTRIAL SOLUTIONS
2501 S. State Hwy. 121 Bus., Suite 200, Lewisville, TX 75067
1-800-929-DOOR •
[email protected] www.overheaddoor.com
© 2018 Overhead Door Corporation. Overhead Door is a trademark and Fire King, Fire Sentinel, RHX, RSX and the Red Ribbon logo are registered trademarks of Overhead Door Corporation.
FireLight is a registered trademark of Nippon Electric Glass Company. All other trademarks are the property of their rightful owners. Consistent with our policy of continuing product
improvements, we reserve the right to change product specification without notice or obligations. C900-900 04/18
