A D R I V E S CO M PA N Y

EP66 EURA Drives GmbH Mühlenweg 143, 22844 Norderstedt

ENGLISH
EP66
Telefon: +49 40 589 7950 0
Fax: +49 40 589 7950 29
FREQUENCY INVERTER
ENGLISH [email protected]
w w w . e uradrive s . e u 0.4 kW - 90 kW
 EP66
TECHNICAL DATA
0.4 kW - 90 kW 3-Phase 380V-460V (+/-15%)
Rated input voltage 3-phase 220V-240V(+/-15%)
FREQUENCY INVERTER Power input
1-Phase 220V～240V (+/-15%)
Input frequency 44….67 Hz

Integrated C3 class filter as standard (2. environment – industrial area)

HIGHLIGHTS
EMC filter
(optional internal C1 class filter kit available)

DSP based high-tech motor control concept, suitable for V/Hz, SENSORLESS VECTOR, PMM synchro- Output voltage 0………V-input
nous motor control, SPEED/TORQUE control mode.
Output frequency 0……...650 Hz (1500HZ OPITION)
Motor output
Intelligent AUTOTUNING functions for quick and easy set-up Frequency resolution 0,01 Hz
Overload capability 150% - 60 sec. / 10 min
Rugged construction, IP66/NEMA 4

Flexible configurable 4 line character display – ready for any common field bus
V/Hz-SpaceVector, SLV-SENSORLESS Vector control, Torque/Speed control mode. CLV-Closed loop
Motor control algorithm
Removable cable conduit plate, including vent with humidity barrier vector, PMSM Permanent Magnet Synchronous Motor SENSORLESS control

Space inside the drive, for customer options, like main/emergency switch, start/stop selectors, Chopper frequency 0.8…16 kHz (fixed / random)
potentiometer and brake resistor
V/Hz curve Linear, exponential, and user-programmable curve
Optional BYPASS switch build in Starting torque 150% rated torque at 0,5 Hz (in SLV Mode)

Control Mode Torque compensation Automatic / Manual

C3 class filter standard – optional C1 EMC filter build in for 1. Environment (residential area)
Motor data input Manual, from nameplate / AUTOTUNING
All standard inverter functions build in, to make it suitable for various applications in industrial and Control range 1:100 in SLV mode,1:1000 in CLV mode,1:20 in PMSM mode
civil area, and for retrofit as well
Speed precision +/- 0,5% (SLV),+/- 0.02% (CLV)
Smart PC-tools, for inverter control, parametrization and troubles hooting. parameter-duplication stick Torque precision +/- 5% (SLV)

Ready for the worldwide market, due to approved international standards DC-Brake Programmable in duration and intensity
Brake chopper Chopper transistor integrated

To display configuration parameters, Inverter status and various operating parameters - all
Display 4 Line character display
FRAMESIZE programmable, easy and flexible

Dimensions Brake resistor Inverter control Via terminals / Keypad / Serial link (or combination of all)
Model Motor power (KW) Framesize
(WxHxD-mm) Min. value
Digital inputs 6 (8) Dig. inputs (NPN-PNP selectable) pulstrain-input
MAIN SWITCH C1 EMC FILTER EP66-0004 S2 0,4 kW - 2,5 A I1 200x412x198 80 Ohm
EP66-0007 S2 0,75 kW - 4,5 A I1 200x412x198 80 Ohm Speed reference input Potentiometer, analogue signal (terminals), keypad (INC/DEC), pulsetrain, via serial link
EP66-0015 S2 1,5 kW - 7 A I1 200x412x198 80 Ohm 2 analogue inputs - 12 BIT: 0…10V, 0...5V, -10V...0...10V, 0..(4)20 mA,
Analogue channels
EP66-0022 S2 2,2 kW - 10 A I1 200x412x198 80 Ohm all free scalable in gain and offset, and mathematically concatenable
EP66-0004 T2 0.4 kW – 2,5A I1 200x412x198 80 Ohm
I/O Channels, Analogue outputs 1 (2) analogue outputs, programmable in gain and function (0…10V, 0(4)..20 mA)
EP66-0007 T2 0,75 kW - 4,5 A I1 200x412x198 80 Ohm control functions
Digital outputs 1 (2) digital OC outputs (free mapping to different functions)
EP66-0015 T2 1,5 kW - 7 A I1 200x412x198 80 Ohm
EP66-0022 T2 2,2 kW - 10 A I1 200x412x198 80 Ohm Relais output 1 switchover contact 5 A 230 V (programmable function assignment)
EP66-0007 T3 0.75kW - 2A I1 200x412x198 150 Ohm/150W Data link Serial link RS 485 (MODBUS ASCI/RTU)
EP66-0015 T3 1.5kW - 4A I1 200x412x198 150 Ohm/150W 24V / 50 mA auxiliary power supply on terminals, 10V potentiometer power
EP66-0022 T3 2.2kW - 6.5A I1 200x412x198 150 Ohm/150W Special functions supply, 5V/100 mA power supply on modbus connector
EP66-0030 T3 3,0 kW - 7 A I1 200x412x198 150 Ohm/150W Simple PTC / KLIXON motor protection
EP66-0040 T3 4,0 kW - 9 A I1 200x412x198 150 Ohm/150W
LCD REMOTE EP66-0055 T3 5,5 kW - 12 A I2 242x418x198 75 Ohm/500W
KEYPAD IP66 Over-voltage, under-voltage
PARAMETER EP66-0075 T3 7,5 kW - 17 A I2 242x418x198 75 Ohm/500W Electronic protections Electrical
over-current overload
COPY STICK EP66-0110 T3 11 kW - 23 A I3 242x471x228 75 Ohm/1.0kW with fault history
EP66-0150 T3 15 kW - 32 A I3 242x471x228 75 Ohm/1.0kW Thermal Inverter overtemperature, I²xt motorprotection PTC/LIXON read in
EP66-0185 T3 18.5kW - 38A I4 242x650x325 30 Ohm/1.5kW

EP66-0220 T3 22kW - 44A I4 242x650x324 30 Ohm/1.5kW

Display IP66 Remote display / keypad unit
EP66-0300 T3 30kW - 60A I4 242x650x324 30 Ohm/1.5kW
Dynamic brake Braking resistors for different load characteristics
EP66-0370 T3 37kW - 75A I5 308x680×379 20 Ohm/2.0kW
EP66-0450 T3 45kW - 90A I5 308x680×379 20 Ohm/2.0kW
Options Power control options Main switch, emergency switch, BYPASS switch
EP66-0550 T3 55kW - 110A I5 308x680×379 20 Ohm/2.0kW Inverter control options Potentiometer, inverter control selector switches
EP66-0750 T3 75kW - 150A I6 370x770×404 15 Ohm/3.0kW PC-software / Parameter Stick Configuration-, control- an diagnosis-tool, Parameter copy/duplicating stick
EP66-0900 T3 90kW - 180A I6 370x770×404 15 Ohm/3.0kW

Protection class IP66 / NEMA4

Operating temperature -10……+40 °C (-40 with optional antifreeze control)
Environmental and
OPTIONAL: Humidity 0 to 98% non-corrosive
operating conditions
MAIN-/EMERGENCY-/ Altitude 1000 m, above 1% derating / 100m
IP66 accesories SERVICE SWITCH
Vibration Max. 1,0 g
INVERTER CONTROL
SELECTOR SWITCHES ROOM FOR BUILD-IN
POTENTIOMETER OPTIONALS Power range 0,4……90 kW

Electromagnetic compatibility EN61800-3(2004)

Standards
Safety EN61800-5-1 2003