Zaber & Zubair Fabrics Ltd.

Fashion Testing Service, Pagar, Tongi, Gazipur-1710 DOC. NO. FTS-QSR-04-558

ISS. NO. / REV NO.: ' 01' / ‘03’
EFFECTIVE FROM: 27/06/2023
DEVELOPMENT (IOM) FABRIC TEST REPORT

Test Report No: FTS2023125836 Report Issue Date: 19.12.2023

PRODUCT INFORMATION
Buyer/ Supplier : VF-VANS Applicant : R&D-Development
IOM No. : 72614/2023 Sample Details : WOVEN FABRIC
Composition : 100% BCI COTTON Emarizing : NON PEACH
Construction : (6+6)X10/2/72X28 Color PRINT Fabric Finish : REGULAR
Weave : OXFORD Claim Weight 12.39 o/z² End Use : MENS BOTTOMS
Note: The results relate only to the items/samples tested and select requested parameters only.
TEST SPECIFICATION
*Tested & Reported according to “VF Vans Softline SOP 13-March-2023”: Woven Fabrics & Inhouse Facility*
S/L Test Name & Standards Tested on Tested Values Requirements Result

Dimensional Change Warp -0.5%

1. 1 After 3HL 0 to -4% Pass
AATCC 135 Weft -3.5%
Spirality a/laundering- Twist
2. 2 After 3HL 1.0% 4% Max. Pass
AATCC 179
Color Change 4.5 4.0
Color Fastness to
3. 3 Washing As Received Acetate Cotton Nylon Poly Acrylic Wool Pass
AATCC 61 2A Color Staining 3.0
4.5 4.0 4.5 4.5 4.5 4.5
Color Fastness to Color Change 4.5 4.0
4. 4 Water As Received Pass
AATCC 107 Color Staining 4.5 3.5 4.5 4.5 4.5 4.5 3.0

Color Fastness to Color Change 4.5 4.0

5. 5 Perspiration As Received Pass
AATCC 15 Color Staining 4.5 4.0 4.5 4.5 4.5 4.5 3.0
Color Fastness to Dry 4.0 3.5
6. 6 Rubbing As Received Fail
AATCC 8 Wet 2.5 3.0
Mass per unit Area- OZ² As Received/
7. 7 B/W 12.82 A/W 12.94 ±5% Pass
ASTM D3776 After 3HL

Warp 12.26 lbs 3.0 lbs

Tear Strength
8. 8 As Received Pass
ASTM D1424
Weft 6.60 lbs 3.0 lbs

Warp 183.4 lbs 50 lbs

Tensile Strength
9. 9 As Received Pass
ASTM D5034
Weft 113.2 lbs 40 lbs
Mode of
Yarn Slippage @1/4" Seam Strength
Failure
Warp
10. 1 Yarn Slippage
As Received No Seam Opening 62.99 lbs STB 30 lbs Pass
0 ASTM D434
Weft No Seam Opening 52.18 lbs STB
11. 1 Fabric Width (Inch.)
As Received Overall 57.0” Cutable 56.0” / Data
1 ASTM D3774
12. 1 Fabric Construction
As Received Ends 72 Picks 28 ±5% Pass
2 ASTM D3775
Note: (+) means extension and (-) means shrinkage. Grey scale rating of ISO 105 A02 and A03 is based on 5 steps of 1 to 5, where 1 is bad and 5 is good.

Md. Mahfujur Rahman Rokib Arif Ishtiaq Sadhan Chandra Chowdhury

Lab Technician Sr. Executive Sr. Asst. General Manager
Prepared By Reviewed By Authorized By

_________________A SISTER CONCERN OF NOMAN GROUP_____________

Fashion Testing Services ISO/IEC 17025:2017 Accredited from BAB.
Feedback/Complaints/Suggestion: 'Sadhan Chowdhury'
[email protected], [email protected]