380W BEAM MOVING HEAD
USER MANUAL
Please read and keep this manual carefully for further use!
1
Thank you for buying our professional Beam moving head.
This user manual includes important information for installation and operation, so please read this
user manual carefully before installation and operation, and keep this user manual well for further
use.
In order to install , operate, and maintain the lighting safety and correctly. We suggest that the
installation and operation should be done by the verified technician and follow the instruction strictly.
Spare part includes:
Name QTY Unit
Fixture 1 PC
User manual 1 PC
Power cable 1 PC
DMX signal cable 1 PC
Safety rope 1 PC
Please check carefully
that there is no damage caused by transportation. Should there be any, consult your local dealer.
Cautions
Before delivery, this device has passed strict inspection, Please follow the user manual
strictly for operation, if this fixture is damaged by improper operation and mistake, the
fixture will be out of warranty, and manufacture or dealer won’t be responsible for it. In case
of any technology change in this manual,we won’t advise in further .
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
Warning!
Silkscreen symbol on
Damages lightby the disregard of this user manual are not subject to
caused
warranty. The dealer will not accept liability for any resulting defects or
problems.
Installation
2
► This fixture is not suitable for direct installation on combustible material surface, please keep the
fixture surface at least 0.5m from any combustible material.
► If you use the quick lock cam in hanging up the fixture, please make sure the quick lock fasteners
turned in the quick lock holes correctly.
►The applicable temperature for the fixture is between -25°C to 45°C. Do not use the lighting under
or above this temperature range.
►The truss for hanging the fixture should be able to hold 10 times weight of this fixture and no
deformation after 1 hour hang.
►Please don’t stand under the fixture when install, uninstall, move or repair the fixture.
►Please ensure the light is connected correctly and invite professional technician to check and
confirm the electrical data before installation.
►Please invite professional technician to check the fixture and installation each year.
Rigging：
Clamp
Bracket
Safety rope
Quick lock
Insert the quick-lock fasteners of the first holder into the respective holes on the bottom of the
device.Tighten the quick-lock fasteners fully clockwise.
Fix the clamp on truss or other fixture bracket.
Pull the safety rope through the holes on the bottom of the base and fasten it on the truss or other
fixing point.
Note:This step is quite important to ensure that fixture will not drop down for the clamp damage.
3
Product specification
Voltage：100-240V，50/60HZ；
Power Consumption：500W；
Fuse:8A/250V，￠5*20
DMX Channel: 16CH
Operation mode: master-slave/DMX/Auto
Focus/Zoom: Yes
Fixed gobo: 12 gobos+open+ 5 glass gobos
Strobe: 25Hz
Color: 14 colors+open
Prism 1: 12-facet
Prism 2: 8+16-facet
Pan: 540°
Tilt: 270°
Frost / Six-color effect: Yes
RDM: Yes
Display and operation
DMX DMX signal indicator
AUDIO Sound control indicator
Up menu up selection
Down menu down selection
Left Menu left to select/return
Right Menu right to select
ENTER Confirm button
4
time on the left Total system usage time
time on the right Total time of this power-on
Vertical signal at the Current DMX signal strength
top Red: No signal / White: Current signal strength
Green: OK, no errors
Square icon in the
Red: There is an error (click the icon or "Information Menu/Error
upper right corner
Information/View" to view the error
System Menu description:
反向 Reve Invert the screen display
退出 Exit Exit to the main interface
Lang 语言 Choose from Chinese or English
标准设置 Standard Address code and some common function settings
高级设置 Advanced Main parameter factory settings
系统信息 Info Error, software version, etc. information display
手动编程 Program Manually control the operation, or edit the user program
Automatic operation or Sound-controlled operation of
测试运行 Perform
built-in programs, user programs
系统复位 Reset System reset to initial position
Display Setting:
5
Default set Enter Default set
Address 001-512 Set address code
Mode1
Mode2
DMX mode Select DMX control mode
Mode3
Mode4
effect wheel automatically finds the shortest
Effect mode No/Yes
distance to rotate and run
Started lamp Off/on Choose to turn the bulb "on" or "off" each time
Switch lamp Off/on Turn on the lamp manually
Clear Keep DMX value or clear DMX channel value
No signal
Hold when no DMX signal
Standard Green
Blue
UI Color Choose screen menu color
Golden
Gray
Show time No/Yes Display the runtime timer on the main screen
Brightness 000-255 Adjust screen brightness
Turn off the screen when no touch and key
Screensaver Off/on
operation
XY encoder No/Yes Cancel or use the XY auto-correction function
X inversion No/Yes Select X-axis to run forward or reverse
Y inversion No/Yes Select Y-axis to run forward or reverse
Focus inversion No/Yes Choose to run the focus forward or reverse
Zoom inversion No/Yes Choose to run the Zoom forward or reverse
Advanced This is the main parameter setting of the fixture and requires permission
If there are no errors or there are errors, click
Error List No error/View
OK to view the errors
System ver Vxxxxxxx System version information
Serial NO. xxxxxxxx Equipment factory number
SYS timer 00000.0H Total system running time (hours)
Run timer 000:00 Running time after this power-on (hours)
Lamp timer 00000.0H The total time of lamp on (hours)
The temperature of the main part (requires
Info Equip TEMP 000
device support)
The temperature of the head (requires device
Head TEMP 000
support)
FAN 1 Speed 0000 RPM fan 1 speed (requires equipment support)
FAN 2 Speed 0000 RPM fan 2 speed (requires equipment support)
Run mode Auto/Sound Run selected programs Auto or Sound
Run speed 255 Set the speed of Auto running
Run cross 255 Set run cross for Auto or Sound
Built-in 1 Off/on built-in test program 1
Built-in 2 Off/on built-in test program 2
User PRO 1 Off/on User-programmed program 1
User PRO 2 Off/on User-programmed program 2
User PRO 3 Off/on User-programmed program 3
Perform User PRO 4 Off/on User-programmed program 4
Circle shape Off/on (reserve)
Square shape Off/on (reserve)
Shape range 000 (reserve)
Sound DB 000 Adjust the sound control sensitivity
This function can program up to 4 user programs, and the 4 programs can be run in
series, that is to say, the programmed
6
4 programs can be switched to ON at the same
Program time in the "User-Pro" function. Go to program 2, go to program 3, then program 4,
then loop back to program 1, and so on. Of course, it can also be run as a single
option.
16 DMX channel:
000 - 003 White
004 - 006 gobo 1
16CH Function 007Value
- 009 Details
gobo 2
000-004 White
gobo 3
010 - 012
005 -009 White+Color 1
013 -- 015 gobo 4
010 014 Color 1
016 -- 018
015 019 gobo 51+color 2
Color
019 -
020 024021 gobo 62
Color
025 029
022 - 034 Color
gobo 72+color 3
030 - 034
025 - 027 Color
gobo 83
035
028 -- 030
039 Color
gobo 93+color 4
040 - 044 Color 4
031 -- 033 gobo 10
045 049 Color 4+color 5
034 - 036
050 - 054 gobo 11
Color 5
037 - 039
055 059 gobo 12
Color 5+color 6
060 -
040 042064 gobo 13
Color 6
065
043 -- 045
069 Color 6+color 7
gobo 14
070 - 074
046 - 048 Color 7
gobo 15
CH1 Color wheel 075 - 079 Color 7+color 8
049 -- 051 gobo 16
080 084 Color 8
052 -- 055
085 089 gobo 17
Color 8+color 9
056 - 059
090 094 White 9
Color
CH4 gobo wheel 095 099
060 - 063 gobo 19+color
Color shake 10
slow to fast
100 -104
064 - 067 Color 10
gobo 2 shake slow to fast
105
068 --109
071 Color
gobo 310+color 11 to fast
shake slow
110 -114 Color 11
072 -119
- 075 gobo 4 shake slow to fast
115 Color 11+color 12
076 --124
120 079 gobo 512shake slow to fast
Color
080 - 083
125-129 gobo 612+color
Color shake slow
13 to fast
130
084 --134
087 gobo 713shake slow to fast
Color
140-
088 - 144
091 Color
gobo 814shake slow to fast
145- 149
092 - 095 Color
gobo 914+White
shake slow to fast
150- 200 Forward flow (from fast to slow)
096 - 255
099 gobo 10 shake slow to fast
201- Reverse flow (from slow to fast)
100 - 103 gobo 11 shake slow to fast
000-003 Shutter closed
104 - 107
004-103 gobo 12from
Strobe shake slow
slow to fast
to fast
108 - 111
104-107 gobo 13
Open theshake slow
shutter to fast
→ (controlled by the dimming channel)
Shutter
CH2 108-207 gobo 14 shake slow to fast
Pulse strobe from slow to fast
/strobe 112 - 115
208-212
116 - 119 Open
gobo 15 shake slow to fast
213-251
120 - 123 Random strobe slow
gobo 16 shake from toslow
fastto fast
252-255 Open
124 - 127 gobo 17 shake slow to fast
CH3 dimmer 000-255 dimmer from dark to bright
128 - 189 Reverse flow (from fast to slow)
190 - 193 Stop
194 - 255 Forward flow (from slow to fast)
000-31 no prism
CH5 Prism 1
32-255 prism 1
CH6 Prism1 000-127 prism angle adjustment
7
128-190 Reverse rotation (fast to slow)
rotation 191-192 Stop
193-255 Forward rotation (slow to fast)
000-31 no prism
CH7 Prism 2
32-255 prism 2
000-127 prism angle adjustment
Prism2 128-190 Reverse rotation (fast to slow)
CH8
rotation 191-192 Stop
193-255 Forward rotation (slow to fast)
CH9 focus 000-255 Pattern clarity from far to near
CH10 pan 000-255 0-540 degree
CH11 pan fine 000-255 0-1.2 degree
CH12 tilt 0-270 degree
000-255
CH13 tilt fine 000-255 0-1.2 degree
CH14 XY speed 000-255 speed fast to slow
000-127 no function
Frost & 6-
CH15 128-191 Frost
color effect
192-255 6-color effect
000-099 no function
100-105 Lamp off
Lamp
106-199 no function
CH16 control &
200-205 Lamp on
Reset
206-249 no function
250-255 all motors reset
Gobo Wheel
8
Color Wheel:
9
Frost & 6-color:
DMX-512 connection
Connect the provided XLR cable to the male 3-pin XLR output of your controller and the other side
to the female 3-pin XLR input of the light.then connect the DMX signal to the first fixture to the 2nd
fixture, after all fixtures are connected,
The signal cable should be two - core with screened cable with XLR input and output connectors.
Please refer to the diagram below
DMX terminator connection
If there are many lines or lights, it is recommended to use a DMX terminator to prevent DMX signal
corruption, the DMX terminator is an simple XLR plug with a 120 Ω resistor connected between pins
2 and 3,which is then plugged into the output XLR socket of the last fixture in the chain.
10
3-Pins connection
Cleaning and maintenance
Cleaning should be performed every 15-day period, by using a sponge which is dipped with
alcohol, rather than wet cloth or other chemical liquid, to clean the mirror.
CAUTION
Cut off power before cleaning and maintenance!
Attention
Do not see directly light source when open the light, and make sure power off before do any
11
installation or maintenance.
CAUTION
Wires connection must be done professional person!
Cautions
Before delivery, this device has passed strict inspection, Please follow the user manual strictly for
operation, if this fixture is damaged by improper operation and mistake, the fixture will be out of
warranty, and manufacture or dealer won’t be responsible for it. In case of any technology change
in this manual,we won’t advise in further .
Common issues instruction
Issues Solve instruction
No power Check power’s voltage
When power in, output light but the Check address setting and the control DMX cable
device cannot accept control connection well or not
signal
The effect have light shadow Check electronic focus DMX channel value, if it’s
suitable distance
Light beam dim The lamp maybe arrived end of using life, should
change new lamp, and also check light source
cleaning or not
Note: the maintenance should be done by the verified technician.
Warranty Card
This product is made of high-brightness transistor. We will provide 1 year warranty
under the condition that user has operated the light normally and lifetime service.
We won't provide warranty if the damage is caused by artificial or force majeure
event. Cost of fittings should be charged by user if product need maintenance after
1 year .Please cut this warranty card and shipped it along with the product to our
factory when applying for warranty.
Product：
Purchasing date：
Code of invoice：
Warranty date: From To
User’s name： Add：
Company： Tel：
12
