06 Basic Specifications 07 Notes This product must not be disposed of as normal household

③ Ensure that the base bracket is complete, fix the bracket and the base as a whole
waste, in accordance with EU directive for waste electrical and electronic
equipment (WEEE- 2012/19/EU). Insteadit should be disposed of by returning it to
on the wall with screws, and check that the wall of the bracket part is firm and flat.
1. In order to ensure the correct use of this product, it must be installed, maintained the point of sale, or to a municipal recycling collection point.
Product Name Control Panel MAX
and disassembled by a professional electrician. The device could be used with a separation distance of 20cm to the human body.
Screen 10.1-inch multi-touch screen / resolution 1920×1200 2. Before installing and disassembling this product, the main power switch must be
cut off to prevent electric shock.
Storage 2GB RAM/8GB ROM
3. This product should be kept away from fire and water sources during installation
Camera IPS 5 million pixels / privacy protection paddle and use, and should not be used in humid environments (such as bathrooms).
4. Confirm that the voltage is in line with the working voltage of this product before
08 Warranty Policy
Audio Speaker * 2/microphone * 2
use, and do not insert the PoE network cable into the network port.
Wi-Fi/Zigbee3.0/ 5. Do not repair the product by yourself. Any modification or flashing of the product
Wireless Protocol The after-sales service of Smart Control Panel S is strictly in accordance with the
Bluetooth 5.0 BLE/BLE mesh without authorization will void the warranty.
"Consumer Rights Protection Law of the People's Republic of China" and "Product
TOF Proximity Sensor/Ambient Light Sensor/ 6. The product needs to be installed by technicians. The installation environment is
Sensor Quality Law of the People's Republic of China", and implements after-sales warranty
Temperature and Humidity Sensor concrete wall.
Schematic diagram of Schematic diagram of
locking screw (including power base) locking screw (without power base)
Operation mode Touch screen/Physical buttons/Voice/APP
7. The distribution box must be plastic and non-hygroscopic material, with a minimum
fire-resistance rating of 5V.
services of repair, replacement and refund. The service content is as follows:
1. Within 7 days from the date of your receipt, if this product has a product Control Panel MAX
④ Embed the upper part of the central control host directly, and then magnetically Interface USB type-C (Debug only, Input: DC12V,1.0A Max) 8. There should be no other metal conductive objects in the distribution box.
performance failure, you can enjoy the return or exchange services for free.

attract the lower part directly to the bracket to complete the installation and check 2. Within 8-15 days from the date of your receipt, if this product has a product
9. The distance between the opening of the product body and the opening of the
Work Temperature 0~40°C performance failure, you can enjoy free replacement or repair services.
Product Manual
whether the buckle is in good condition. junction box should be at least 1 cm.
3. Within 12 months from the date of your receipt, if the product has a product
Work Humidity 5%~90%RH non-condensing state
performance failure, you can enjoy free maintenance services.
Wall Input 100-240V~, 50/60Hz

Wireless For EU Type Frequency Max. Power Class II equipment.Equipment in which protection against electric shock does
not rely on basic insulation only, but in which a supplementary safeguard is provided,
09 Non-warranty regulations
Wi-Fi 2400-2483.5MHz 20dBm there being no provision for protective earthing or reliance upon installation
conditions.
Bluetooth 2400-2483.5MHz 10 dBm 1. Unauthorized maintenance, misuse, collision, negligence, abuse, liquid ingress,
~ a.c. Nature of the supply voltage.
accident, alteration, incorrect use of non-original accessories, or tearing off/altering of
Zigbee 2400-2483.5MHz 12 dBm Declaration of Conformity European notice
labels or anti-counterfeiting marks.
BoxSize
Pay Attention 2. Expiration of validity period of the warranty services of repair, replacement and
refund.
Do not use force when installing the screws, so as not to cause deformation of the
3. Damage caused by force majeure.
bracket. Hereby, We declares that this product is in compliance with essential
4. Other damages or malfunctions that are not caused by the product's own design,
The stripping length is about 10mm when wiring. Adjust the stripping length requirements and other relevant provisions of Directive 2014/53/EU,2011/65/EU.
technology, manufacturing, quality and other issues.
Please read the manual carefully before using the product according to the actual situation to ensure good release and avoid exposed wires.

01 Product introduction 03 Packing list 04 Function Diagram 05 Product Installation Federal Communication Commission
① Bottom box noun: US Spec Power Base
Interference Statement
This product is suitable for indoor public spaces, and integrates a multi-functional 1. Product parts and accessories list Parameters Table: Microphone Camera Light sensor Proximity sensor 1.Installation preparation
This device complies with Part 15 of the FCC Rules. Operation is subject to the
control panel that integrates control, interconnection, entertainment, and security.
Compatible with a variety of product forms, it is designed with standard bases for ① This product is powered by the neutral wire, please arrange the neutral wire in following two conditions: (1) this device may not cause harmful interference, and (2)
advance. this device must accept any interference received, including interference that may
different countries, and is used with the wall bracket to fix the control panel and hang Input 100-240V~, 50/60Hz
it on the wall. It mainly provides gateway function, scene panel, device video intercon- Mic ban button ② This product is connected to the network through Wi-Fi or Ethernet, please arrange cause undesired operation.
Switch 100-240V~, 50/60Hz 10A(two-way relay)
the Wi-Fi network or Ethernet cable in advance. This equipment has been tested and found to comply with the limits for a Class B
nection, and other functions. Users can control and manage different types of smart
③ If you need to use the relay, RS485, security network port of this product, please
Single load 200W digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
devices under the account through physical buttons, screen, voice and other screw bag x 1
User Manual
Total load 400W preset the relevant cables in advance. provide reasonable protection against harmful interference in a residential
interactive methods. Screw(KM4*40mm)*2,
Custom button
④ In order to ensure electricity safety and wireless performance, please use the
Asian
Screw(KA3.5*25mm)*4 Single-channel load RJ45 network port×1 installation. This equipment generates uses and can radiate radio frequency energy
Europen
Screw(KM3*20mm)*2,
Total load RS485 interface×1 standard plastic box for installation and use. and, if not installed and used in accordance with the instructions, may cause harmful
⑤ Please bring your own screwdriver, test pen, electrical tape and other tools, please
Screw(KA3.5*25mm)*4
02 Quick Setup Host x 1 User Manual x 1
US
Screw(UNC6#-32*25mm)*2,
interference to radio communications. However, there is no guarantee that
Screw(KA3.5*25mm)*4 Temperature and do not operate with electricity. interference will not occur in a particular installation. If this equipment does cause
humidity sensor
② Bottom box noun: European Spec Power Base
harmful interference to radio or television reception, which can be determined by
RISK OF FIR Install only in concrete or other non-combustible wall
turning the equipment off and on, the user is encouraged to try to correct the
1. Check and confirm the product itself and accompanying accessories according to
Parameters Table: Speaker Type-c interface Reset button 2. Installation Instructions interference by one or more of the following measures:
the purchased version.
① Turn off the main power switch, and use a test pen to confirm that the live wire of
(Debug only and Input) —Reorient or relocate the receiving antenna.
2. Follow the instructions in the manual to complete the required interfaces for
—Increase the separation between the equipment and receiver.
product installation and connection and confirm, and it will automatically start when the cassette is not charged.
② Connect the base correctly, make sure that the copper wire and the terminal are
Input 100-240V~, 50/60Hz —Connect the equipment into an outlet on a circuit different from that to which the
powered on.
receiver is connected.
3. Search for APP in the app store or scan the QR code on the outer package/instruc- well released, and there is no exposed wire.
Live wire Neutral wire —Consult the dealer or an experienced radio/TV technician for help.
tion to download and install the APP and complete the account login. US Spec Bracket x 1 European Spec Bracket x 1 Asian Spec Bracket x 1 Live wire Neutral wire

③ Bottom box noun: Asian Spec Power Base

(Optional*) (Optional*) (Optional*) Caution: The user is cautioned that changes or modifications not expressly approved
4. Complete the initialization process operation of the Control Panel MAX according Light line 2 Live wire Neutral wire
Light line 2 by the party responsible for compliance could void the user's authority to operate the
to the prompts of the central control. Light line 1

*Optional accessories: support multiple forms of standard bases for different

Light line 1
equipment.
5. Follow the prompts to complete the basic network activation, complete the basic L1 L2 L N

L1 L2 L N

configuration, and enter to start using the Control Panel MAX device. countries, and select suitable bases according to requirements. Input 100-240V~, 50/60Hz L N

FCC Radiation Exposure Statement:

Switch 100-240V~, 50/60Hz 10A(two-way relay)
This equipment complies with FCC radiation exposure limits set forth for an
2. Introduction of optional accessories Single load 200W
GND A B
uncontrolled environment. This equipment should be installed and operated with
Total load 400W
Network

minimum distance 20cm between the radiator & your body.

This product supports multiple forms, and has multiple functions; according to the US Spec European Spec Asian Spec
Single-channel load RJ45 network port×1 RF Exposure: A distance of 20cm shall be maintained between the antenna and
actual wiring and installation reservations on site, a suitable base cassette can be Power Base Power Base Power Base
Total load RS485 interface×1 users, and the transmitter module may not be co-located with any other transmitter
Scan the QR code to download “Smart Life” App selected.
Please connect according to the actual marking on the product or antenna.
*App is subject to the actual released version
L: Live wire input Stripping length 10mm
N: Neutral wire input