Zebco De-Liar 2.0 Features: 3. Start weighing.
1) Accurately weighs up to 50 lbs./22 kg * Verify the reading is "0". If not, press “POWER” to display "0".
Art No.: ZDELIAR.FB4
2) Stores up to 8 weights in memory * Using the non-puncturing clamp-style grip, clamp the bottom
Specification: 3) Clear LCD display: 37x18mm jaw of the fish to be weighed.
* Steadily suspend fish until hearing the beeping sound,
4) Water resistant indicating that the weight has been read and displayed. Set the
5) Requires 2 AAA batteries (Not included) fish down, and read the weight.
* Press the "POWER" button to start again.
b. If you use a bag or other container for weighing:
* Place an empty container on the clamp and proceed to weigh it.
* Wait for the starting weight to be displayed and press “POWER”
Instructions: to display "0" in order to zero out the scale.
Clear LED Display
Non- * Place fish to be weighed in the container.
puncturing * Lift the container from the ground until hearing the beeping
Save Button
Clamp-Style WEIGHING sound, indicating that the weight has been read and displayed.
Grip Before weighing:
Delete Button
Set the object down, and read the weight.
Whenever possible, please allow the scale to warm up
for 30 seconds after first turning the power on so that the 4. Record weights
a. When weight is displayed on LCD display, press the
scale will function properly and accurately.
“SAVE” button. Your recorded weight will be placed into
Error messages: next available storage slot automatically.
b. When all 8 storage slots are full, the lightest weight will
EEEE: Overload
be automatically replaced by the new weight
: Low battery
Record Button
5. Check the recorded weights
a. Press “RECORD” button until locating the storage slot you'd
like to access.
Weighing procedures:
6. Delete recorded weights
HOLD Lb Kg 1. Press the “POWER” button to turn on the scale; and hold a. When “C” is displayed, the number reflected is the total weight
it for 3 seconds to turn off the scale. recorded for all storage slots. Press the “DELETE” button to
When power is turned on, "HI" will appear on the screen for a delete all storage weights.
few seconds and finally "0" will appear on the display. Press b. When you want to delete a particular recorded weight, please
“POWER” button for 3 seconds to turn off the scale. press “RECORD” button until the number you'd like to delete
appears under the corresponding slot number then press the
“DELETE” button, causing the weight to flash then press
“DELETE” button again, effectively deleting that recorded weight.
Display Options: E, A, C, 1, 2, 3, 4, 5, 6, 7, 8 2. Select unit of measurement.
E – Total weight for all recorded weights Press “POWER" and while "HI" is displayed on the screen, c. When under the “E” or “A” slot, pressing the “DELETE” button
quickly press the “SAVE” button before the screen displays will not delete any recorded weight.
A – Average weight of all stored weights
C – RESET the memory "0.00" to select the preferred unit - Kg or Lb. d. Press “POWER” button, to return the weigh function.
1, 2, 3, 4, 5, 6, 7, 8 – Weight storage slots
7. Water resistant
• Designed for hobby/household use, not for commercial use.
• Cannot be used to weigh fish for competition purposes.
Size : 90x175mm
