AC8976A8 Datasheet

Zhuhai Jieli Technology Co.,LTD

Version：2.1

Date：2020.10.09

Copyright © Zhuhai Jieli Technology Co.,LTD. All rights reserved.

1
Confidential
The information contained herein is the exclusive property of JIELI and shall not be distributed, reproduced, or disclosed in whole or in part without
prior written permission of JIELI.
 AC8976A8 Datasheet

AC8976A8 Features
CPU Meet class1 class2 and class3 transmitting
32-bit DSP supports hardware Float Point power requirement
Unit(FPU) Support GFSK and π/4 DQPSK all packet
Up to 160MHz programmable processor types
64Vectored interrupts Provides a maximum +8dbm transmitting
4 Levels interrupt priority power
receiver with -94dBm sensitivity
DSP Audio Processing Fast AGC for enhanced dynamic range
SBC, AAC Audio decodes supported for BT Supports
audio a2dp\avctp\avdtp\avrcp\hfp\spp\smp\att\gap\
mSBC voice codec supported for BT phone gatt\rfcomm\sdp\l2cap profile
Supports MP2, MP3, WMA, APE, FLAC, a2dp 1.3\avctp 1.4\avdtp 1.3\ avrcp 1.5\
AAC, MP4, M4A, WAV, AIF, AIFC audio hfp 1.5 \spp 1.0\rfcomm 1.2\pnp 1.3\
decoding hid 1.0\sdp core4.2\l2cap core 4.2
Packet Loss Concealment (PLC) for voice
processing Peripherals
Single/Dual MIC Environmental Noise One full speed USB 2.0 OTG controller
Cancellation (ENC) Six multi-function 32-bit timers, support
Support Feed-Forward, Feed-Back, Hybrid capture and PWM mode
three modes Active Noise Cancellation Three full-duplex basic UART, support DMA
(ANC) mode
Multi-band DRC limiter One hardware IIC interface supports host and
20-band EQ configuration for voice Effects device mode
Two Built-in low power Cap Sense Keys
Audio Codec Built-in Cap Sense Key controller
Two channels 24-bit DAC, SNR >= 101dB 10-bit ADC for analog sampling
Two channels 24-bit ADC , SNR >= 92dB External wake up/interrupt on all GPIOs
Sampling rates of
8KHz/11.025KHz/16KHz/22.05KHz/24KHz/ PMU
32KHz/44.1KHz/48KHz are supported Low voltage LDO and DC-DC for internal
Two analog MIC amplifier, build-in MIC bias digital and analog circuit supply
generator 2uA current consumption in the soft-off mode
Supports two PDM digital MIC inputs Built-in LDO and DC-DC for the core, I/O,
Two channels Stereo analog MUX Bluetooth and flash
Supports cap-less, single-ended, and VBAT is 2.2V to 4.5V
differential mode at the DAC path VDDIO is 2.2V to 3.4V
Supports 16ohm and 32ohm Speaker loading
Packages
Bluetooth QFN32(4mm*4mm)
Compliant with Bluetooth
V5.1+BR+EDR+BLE specification Temperature
2
Confidential
The information contained herein is the exclusive property of JIELI and shall not be distributed, reproduced, or disclosed in whole or in part without
prior written permission of JIELI.
 AC8976A8 Datasheet

Operating temperature: -40℃ to+85℃ Applications

Storage temperature: -65℃ to +150℃ Bluetooth TWS headset
Bluetooth TWS ANC headset

3
Confidential
The information contained herein is the exclusive property of JIELI and shall not be distributed, reproduced, or disclosed in whole or in part without
prior written permission of JIELI.
 AC8976A8 Datasheet

1、Pin Definition

1.1 Pin Assignment

32 31 30 29 28 27 26 25
VCOM USBDP
1 24
DACL USBDM
2 23
DACR PC2
3 22
PB8 AC8976A8 PC3
4 21
PB7 (QFN32) PC4
5 20
PB4 PC5
6 19
PGND BT_OSCO
7 18
SW BT_OSCI
8 17
GND BOM 9 10 11 12 13 14 15 16

Figure 1-1 AC8976A8 Package Diagram

2
Confidential
The information contained herein is the exclusive property of JIELI and shall not be distributed, reproduced, or disclosed in whole or in part without
prior written permission of JIELI.
 AC8976A8 Datasheet

1.2 Pin Description

Table 1-1 AC8976A8 Pin Description

PIN I/O Drive

Name Function Other Function
NO. Type (mA)

1 VCOM P / DAC reference voltage

2 DACL O / DAC Left Channel
3 DACR O / DAC Right Channel
MIC1：MIC1 Input Channel；
MIC1_P：Different MIC1 Positive
4 PB8 I/O 8/24 GPIO
UART0RXB：Uart0 Data Input(B)；
CAP4：Timer4 Capture；
MIC_BIAS1：MIC1 Bias Output；
5 PB7 I/O 8/24 GPIO MIC1_N：Different MIC1 Negative
UART0TXB：Uart0 Data Output(B);
ADC9：ADC Input Channel 12；
6 PB4 I/O 8/24 GPIO
TMR2：Timer2 Clock Input;
7 PGND P / DCDC Ground
8 SW P / DCDC switch output, connected to inductor
9 VBAT P / Power Supply, connect to battery
Charge Power Input;
UART0TXC：Uart0 Data Output(C);
10 LDO_IN P / UART0RXC：Uart0 Data Input(C);
PWM3：Timer3 PWM Output；
CAP1：Timer1 Capture;
11 VDDIO P / IO Power 3.3v
12 BT_AVDD P / GPIO BT Power
PB3 I/O 8/24 GPIO
13
EVDD P / EVDD：Supply volte to Peripherals
UART2RXC：Uart2 Data Input(C);
SPI2DOC：SPI2 Data Out(C);
14 PB2 I/O 8/24 GPIO CAP5：Timer5 Capture;
ADC7：ADC Input Channel 7；
LP_TH1：Low Power Touch Channel 1
Long Press Reset；
SPI2CLKC：SPI2 Clk(C);
GPIO
15 PB1 I/O 8/24 UART2TXC：Uart2 Data Output(C)
(pull up)
ADC6：ADC Input Channel 6；
LP_TH0：Low Power Touch Channel 0

3
Confidential
The information contained herein is the exclusive property of JIELI and shall not be distributed, reproduced, or disclosed in whole or in part without
prior written permission of JIELI.
 AC8976A8 Datasheet

16 BT_RF / / BT Antenna
17 BT_OSCI I / BTOSC In
18 BT_OSCO O / BTOSC Out
UART2RXD：Uart2 Data Input(D);
SPI1DOB：SPI1 Data Out(B);
19 PC5 I/O 8/24 GPIO ALNK_DAT3(B)：Audio Link Data3(B);
IIC_SDA_B：IIC SDA(B)；
ADC5：ADC Input Channel 5；
UART2TXD：Uart2 Data Output(D);
SPI1CLKB：SPI1 Clock(B);
ALNK_DAT2(B)：Audio Link Data2(B);
20 PC4 I/O 8/24 GPIO
IIC_SCL_B：IIC SCL(B)；
ADC4：ADC Input Channel 4；
PWM4：Timer4 PWM Output；
UART0RXD：Uart0 Data Input(D);
SPI1DIB：SPI1 Data In(B);
ALNK_LRCK(B)：Audio Link Word
21 PC3 I/O 8/24 GPIO
Select(B);
IIC_SDA_C：IIC SDA(C)；
TMR3：Timer3 Clock Input;
ALNK_SCLK(B)：Audio Link Serial Clock(B);
IIC_SCL_C：IIC SCL(C)；
22 PC2 I/O 8/24 GPIO
UART0TXD：Uart0 Data Output(D);
TMR1：Timer1 Clock Input;
UART1RXD：Uart1 Data Input(D)；
23 USBDM I/O 4 USB Negative Data IIC_SDA_A：IIC SDA(A)；
ADC11：ADC Input Channel 11；
UART1TXD：Uart1 Data Output(D)；
24 USBDP I/O 4 USB Positive Data IIC_SCL_A：IIC SCL(A)；
ADC10：ADC Input Channel 10；
ALNK_LRCK(A)：Audio Link Word
Select(A);
UART2RXB：Uart1 Data Input(B)；
25 PA8 I/O 8/24 GPIO
PLNK_DAT1：PLNK Data1;
Touch5：Touch Input Channel 5;
ADC3：ADC Input Channel 3；
ALNK_SCLK(A)：Audio Link Serial
Clock(A);
26 PA7 I/O 8/24 GPIO UART2TXB：Uart0 Data Output(B);
Touch4：Touch Input Channel 4;
TMR0：Timer0 Clock Input;
27 PA6 I/O 8/24 GPIO ALNK_DAT3(A)：Audio Link Data3(A);

4
Confidential
The information contained herein is the exclusive property of JIELI and shall not be distributed, reproduced, or disclosed in whole or in part without
prior written permission of JIELI.
 AC8976A8 Datasheet

UART0RXA：Uart1 Data Input(A)；

PLNK_DAT0：PLNK Data0;
Touch3：Touch Input Channel 3;
IIC_SDA_D：IIC SDA(D)；
ADC2：ADC Input Channel 2；
CAP0：Timer0 Capture；
ALNK_DAT1(A)：Audio Link Data1(A);
UART0TXA：Uart0 Data Output(A);
PLNK_SCLK：PLNK Serial Clock;
28 PA5 I/O 8/24 GPIO Touch2：Touch Input Channel 2;
IIC_SCL_D：IIC SCL(D)；
ADC1：ADC Input Channel 1；
PWM5：Timer5 PWM Output；
ALNK_DAT0(A)：Audio Link Data0(A);
UART2TXA：Uart2 Data Output(A);
PA3 I/O 8/24 GPIO ADC0：ADC Input Channel 0；
PWM1：Timer1 PWM Output；
Touch0：Touch Input Channel 0;
29
ALNK_MCLK(A)：ALNK Master Clock(A);
MIC_BIAS0：MIC0 Bias Output；
PA2 I/O 8/24 GPIO MIC0_N：Different MIC0 Negative
CAP3：Timer3 Capture；
UART1RXC：Uart1 Data In(C)；
MIC0：MIC0 Input Channel ;
MIC0_P：Different MIC0 Positive
30 PA1 I/O 8/24 GPIO
PWM0：Timer0 PWM Output；
UART1TXC：Uart1 Data Output(C)；
31 MIC_VDD O / MIC Power Supply
32 DACVSS P / Analog Ground

5
Confidential
The information contained herein is the exclusive property of JIELI and shall not be distributed, reproduced, or disclosed in whole or in part without
prior written permission of JIELI.
 AC8976A8 Datasheet

2、Electrical Characteristics

2.1 Absolute Maximum Ratings

Table 2-1
Symbol Parameter Min Max Unit
Topt Operating temperature -40 +85 °C
Tstg Storage temperature -65 +150 °C
VBAT Supply Voltage -0.3 4.5 V
LDO_IN Charger Voltage -0.3 6 V
V3.3IO 3.3V IO Input Voltage -0.3 3.6 V

Note : The chip can be damaged by any stress in excess of the absolute maximum ratings listed below

2.2 PMU Characteristics

Table 2-2
Symbol Parameter Min Typ Max Unit Test Conditions
VBAT Voltage Input 2.2 3.7 4.2 V
Charger supply
LDO_IN Voltage 4.5 5.0 5.5 V
Normal mode
Voltage output _ 3.0 _ V VBAT = 4.2V, 10mA loading
VDDIO
Loading current _ _ 100 mA VDDIO=3V@VBAT = 4.2V
Voltage output _ 1.3 _ V VDDIO=3.0V, 10mA loading
BT_AVDD
Loading current _ _ 60 mA BT_AVDD=1.25V@VDDIO=3.0v
Voltage output _ 1.1 _ V BT_AVDD=1.25V, 1mA loading
EVDD
Loading current _ _ 5 mA EVDD=1.1V@BT_AVDD=1.25v
LP mode
VDDIO Loading current 5 mA VDDIO=3V@VBAT = 4.2V

2.3 Battery Charge

Table 2-3
Symbol Parameter Min Typ Max Unit Test Conditions
Charge Input
LDO_IN 4.5 5 5.5 V _
Voltage

VCharge Charge Voltage 4.15 4.2 4.25 V _

6
Confidential
The information contained herein is the exclusive property of JIELI and shall not be distributed, reproduced, or disclosed in whole or in part without
prior written permission of JIELI.
 AC8976A8 Datasheet

ICharge Charge Current 20 200 mA Charge current at fast charge mode

Trickle Charge
ITrikl 20 45 70 mA VBAT<VTrikl
Current

2.4 IO Input/Output Electrical Logical Characteristics

Table 2-4
IO input characteristics
Symbol Parameter Min Typ Max Unit Test Conditions
Low-Level Input
VIL -0.3 _ 0.3* VDDIO V VDDIO = 3.3V
Voltage
High-Level Input 0.7*
VIH _ VDDIO+0.3 V VDDIO = 3.3V
Voltage VDDIO
IO output characteristics
Low-Level Output
VOL _ _ 0.33 V VDDIO = 3.3V
Voltage
High-Level Output
VOH 2.7 _ _ V VDDIO = 3.3V
Voltage

2.5 Internal Resistor Characteristics

Table 2-5
Internal Internal
General High
Port Pull-Up Pull-Down Comment
Output Drive
Resistor Resistor
PA1~PA8
PC2~PC5 1、PB1 default pull up
8mA 24mA 10K 10K
PB1~PB4 2、USBDM & USBDP default pull
PB7~PB8 down
USBDP 4mA _ 1.5K 15K 3、internal pull-up/pull-down
resistance | accuracy ±20%
USBDM 4mA _ 180K 15K

2.6 DAC Characteristics

Table 2-6
Parameter Min Typ Max Unit Test Conditions
Frequency Response 20 _ 20K Hz
THD+N _ -80 _ dB 1KHz/0dB
S/N _ 101 _ dB 10Kohm loading
Crosstalk _ -80 _ dB With A-Weighted Filter
Output Swing 0.45 Vrms
1KHz/-60dB
Dynamic Range 90 dB
10Kohm loading

7
Confidential
The information contained herein is the exclusive property of JIELI and shall not be distributed, reproduced, or disclosed in whole or in part without
prior written permission of JIELI.
 AC8976A8 Datasheet

With A-Weighted Filter

DAC Output Power 11 _ mW 32ohm loading

2.7 ADC Characteristics

Table 2-7
Parameter Min Typ Max Unit Test Conditions
Dynamic Range 80 dB 1KHz/-60dB
S/N _ 92 _ dB
THD+N _ -75 _ dB 1KHz/-60dB
Crosstalk _ -80 _ dB

2.8 BT Characteristics

2.8.1 Transmitter
Basic Data Rate Table 2-8
Parameter Min Typ Max Unit Test Conditions

RF Transmit Power 6 8 dBm

RF Power Control Range 20 dB 25℃,

20dB Bandwidth 950 KHz
Power Supply
+2MHz -40 dBm
VBAT=5V
Adjacent Channel -2MHz -38 dBm
2441MHz
Transmit Power +3MHz -44 dBm

-3MHz -35 dBm

Enhanced Data Rate Table 2-9

Parameter Min Typ Max Unit Test Conditions

Relative Power -1 dB

DEVM RMS 6 %
π/4 DQPSK
25℃,
DEVM 99% 10 %
Modulation Accuracy
DEVM Peak 15 % Power Supply

+2MHz -40 dBm VBAT=5V

Adjacent Channel -2MHz -38 dBm 2441MHz
Transmit Power +3MHz -44 dBm

-3MHz -35 dBm

8
Confidential
The information contained herein is the exclusive property of JIELI and shall not be distributed, reproduced, or disclosed in whole or in part without
prior written permission of JIELI.
 AC8976A8 Datasheet

2.8.2 Receiver
Basic Data Rate Table 2-10
Parameter Min Typ Max Unit Test Conditions

Sensitivity -94 dBm

Co-channel Interference Rejection -13 dB

25℃,
+1MHz +5 dB

-1MHz +2 dB Power Supply

Adjacent Channel +2MHz +37 dB VBAT=5V

Interference Rejection -2MHz +36 dB 2441MHz

+3MHz +40 dB

-3MHz +35 dB

Enhanced Data Rate Table 2-11

Parameter Min Typ Max Unit Test Conditions

Sensitivity -94 dBm

Co-channel Interference Rejection -13 dB

25℃,
+1MHz +5 dB

-1MHz +2 dB Power Supply

Adjacent Channel +2MHz +37 dB VBAT=5V

Interference Rejection -2MHz +36 dB 2441MHz

+3MHz +40 dB

-3MHz +35 dB

9
Confidential
The information contained herein is the exclusive property of JIELI and shall not be distributed, reproduced, or disclosed in whole or in part without
prior written permission of JIELI.
 AC8976A8 Datasheet

3、 Package Information
3.1 QFN32_4.0x4.0

Figure 3-1 AC8976A8 Package

10
Confidential
The information contained herein is the exclusive property of JIELI and shall not be distributed, reproduced, or disclosed in whole or in part without
prior written permission of JIELI.
 AC8976A8 Datasheet

4、Revision History
Date Revision Description
2020.08.18 V2.0 Initial Release
Update PMU characteristics
2020.10.09 V2.1
Add Bluetooth profiles version number

11
Confidential
The information contained herein is the exclusive property of JIELI and shall not be distributed, reproduced, or disclosed in whole or in part without
prior written permission of JIELI.