Scribd
Upload
111 views2 pages

Odin 3 Falsh - Samsung

Odin3 is a tool for flashing firmware on Samsung devices, requiring careful preparation including data backup and correct firmware usage. The guide outlines steps from downloading necessary files to flashing the firmware and troubleshooting common issues. Users are advised to ensure their device is charged and to enable specific settings before proceeding with the flashing process.

Uploaded by

zidekhadi99
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
111 views2 pages

Odin 3 Falsh - Samsung

Odin3 is a tool for flashing firmware on Samsung devices, requiring careful preparation including data backup and correct firmware usage. The guide outlines steps from downloading necessary files to flashing the firmware and troubleshooting common issues. Users are advised to ensure their device is charged and to enable specific settings before proceeding with the flashing process.

Uploaded by

zidekhadi99
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

### **Odin3 Guide: How to Flash Samsung Firmware**

Odin3 is a tool used to flash stock or custom firmware, recoveries, and root
packages on Samsung devices. Here’s a step-by-step guide to using Odin3 safely.

---

## **⚠ Important Notes Before You Start**


✔ **Backup your data** – Flashing firmware can erase all data.
✔ **Use correct firmware** – Using the wrong firmware can brick your device.
✔ **Charge your device** – Ensure at least 50% battery.
✔ **Enable USB Debugging & OEM Unlock** – Found in Developer Options.

---

## **Step 1: Download Necessary Files**


🔹 **Odin3 Tool** – [Latest Odin3 versions](https://odindownload.com/)
🔹 **Samsung USB Drivers** – Install from [Samsung’s
website](https://developer.samsung.com/)
🔹 **Correct Firmware** – Download from sites like
[SamMobile](https://www.sammobile.com/firmwares/) or [Frija Tool]

---

## **Step 2: Boot Device into Download Mode**


1. **Power Off** your Samsung device.
2. Press and hold **Volume Down + Power + Home** (or **Bixby** on newer models).
3. When you see a warning screen, press **Volume Up** to enter **Download Mode**.

---

## **Step 3: Connect Device to PC & Open Odin**


1. Launch **Odin3.exe** on your Windows PC.
2. Connect your device via USB cable.
3. Odin should show **"Added!"** in the log section.

---

## **Step 4: Load Firmware into Odin**


1. Click the **BL** button & select the **BL (Bootloader) file**.
2. Click the **AP** button & select the **AP (PDA) file** (this may take time to
load).
3. Click the **CP** button & select the **CP (Modem) file**.
4. Click the **CSC** button & select either:
- **CSC** (for a factory reset)
- **HOME_CSC** (to retain data)

*(Some firmware comes as a single **.tar.md5** file. In that case, load it under
**AP**.)*

---

## **Step 5: Flash Firmware**


1. Ensure **Auto Reboot** and **F. Reset Time** are checked in Odin.
2. Click **Start** to begin flashing.
3. Wait for Odin to display **PASS!** in green.

---

## **Step 6: Reboot & Verify**


- If stuck on boot screen, enter **Recovery Mode** (**Volume Up + Power +
Home/Bixby**) and **wipe cache/data**.
- If the device is stuck in a boot loop, reflash firmware or perform a factory
reset.

---

## **Common Issues & Fixes**


❌ **Odin Stuck on "FAIL"** → Try another USB cable or Odin version.
❌ **Device Not Detected** → Reinstall Samsung USB drivers.
❌ **Endless Boot Loop** → Wipe cache/data from Recovery Mode.

---

You might also like