https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by sales@ChinaStandards.
net
ICS 13.340.20
CCS C 73
National Standard of the People’s Republic of China
GB 811-2022
Replaces GB 811-2010
Helmets for motorcycle and electric
bicycle users
摩托车、电动自行车乘员头盔
(English Translation)
Issue date: 2022-12-01 Implementation date: 2023-07-01
Issued by the State Administration for Market Regulation of the
People's Republic of China
the Standardization Administration of the People’s Republic
of China
https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by
[email protected] Foreword
Codeofchina.com is in charge of this English translation. In case of any doubt about the
English translation, the Chinese original shall be considered authoritative.
This document is developed in accordance with the rules given in GB/T 1.1-2020
Directives for standardization - Part 1: Rules for the structure and drafting of standardizing
documents.
This standard replaces GB 811-2010 Helmets for motorcyclists. In addition to structural
adjustment and editorial changes, the following main technical changes have been made
with respect to GB 811-2010:
a) The “Scope” is modified (see Clause 1; Clause 1 of Edition 2010);
b) The term “haze” and its definition are added (see 3.8);
c) The product classification is modified (see Clause 4; Clause 3 of Edition 2010);
d) The structure is modified (see 5.1; 4.1 of Edition 2010);
e) The protecting section and testing section are modified (see 5.2; 4.2.1 of Edition
2010);
f) The mass is modified (see 5.3; 4.2.2 of Edition 2010);
g) The item “abrasion resistance” is added (see 5.4.2.3);
h) The shear force of raised structure on the surface is added (see 5.4.3);
i) The item “surface friction” is added (see 5.4.4);
j) The impact energy absorption performance is modified (see 5.4.8; 4.2.8 of Edition
2010);
k) The abrasion resistance test is added (see 6.5.3);
l) The shear force test of raised structure on the surface is added (see 6.6);
m) The surface friction test is added (see 6.7);
n) The procedures of stability test of fixing devices are modified (see 6.9.2; 5.7.2 of
Edition 2010);
i
https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by [email protected]
o) The testing headform is modified [see 6.11.2.2 a); 5.9.1.1 a) of Edition 2010];
p) The procedures of impact energy absorption performance test are modified (see
6.11.5; 5.9.4 of Edition 2010);
q) The procedures of penetration resistance test are modified (see 6.12.3; 5.10.3 of
Edition 2010);
r) The type inspection is modified (see 7.1; 6.2 of Edition 2010);
s) The marking and identification are modified (see 8.1; 7.1 of Edition 2010);
t) The shape and dimension of the testing headform above the reference plane are
added (see Annex A);
u) The shape and dimension of the testing headform below the reference plane are
added (see Annex B);
v) The identification requirements and test methods for hamlet types are added (see
Annex C).
Attention is drawn to the possibility that some of the elements of this document may be the
subject of patent rights. The issuing body of this document shall not be held responsible
for identifying any or all such patent rights.
This standard was jointly proposed by and is under the jurisdiction of the Ministry of Public
Security of the People's Republic of China and the Ministry of Industry and Information
Technology of the People’s Republic of China.
The previous editions of this document are as follows:
——This document was firstly issued in 1989 with the serial number of GB 811-1989
under the name of Helmets for motorcycle users; it was firstly revised in 1998 and
secondly revised in 2010;
——This is the third revision.
ii
https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by [email protected]
Helmets for motorcycle and electric bicycle
users
1 Scope
This document specifies the product classification, requirements, inspection rules,
marking and identification, instructions for use, packaging, transportation and storage of
helmets for motorcycle and electric bicycle users, and describes the relevant test
methods.
This document is applicable to helmets for motorcycle and electric bicycle users (including
drivers and passengers).
This document is not applicable to helmets worn by cyclists, skateboarders and roller
skaters, nor to occupational safety helmets.
2 Normative references
The following documents contain requirements which, through reference in this text,
constitute provisions of this document. For dated references, only the edition cited applies.
For undated references, the latest edition (including any amendments) applies.
GB/T 2410-2008 Determination of the luminous transmittance and haze of transparent
plastics
GB/T 18833 Retroreflective sheeting for traffic control
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
helmet for motorcycle and electric bicycle users
outfit for reducing the injury of head of motorcycle and electric bicycle users in accidents
3.2
shell
outer structure of the helmet for motorcycle and electric bicycle users, forming the general
shape of helmet
3.3
protective padding
appropriate padding used to absorb impact energy
1
https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by [email protected]
3.4
comfort padding
padding provided for the wearer's head comfort
3.5
retention system
component to ensure that the helmet for motorcycle and electric bicycle users is firmly
fixed on the head
3.6
goggles
eye and face protectors that cover the eyes and face without affecting the observation
3.7
luminous transmittance
ratio of the luminous flux of visible light passing through the goggles to the incident light
flux
3.8
haze
ratio of the scattered light flux deviated from the direction of incident light when passing
through the goggles to the incident light flux
Note: It is expressed as a percentage. Only the scattered light flux more than 2.5° deviated from the
direction of the incident light is used to calculate haze.
[Source: GB/T 2410-2008, 3.1, modified]
3.9
testing headform
headform simulating the geometric profile and mechanical property of human head when
inspecting the helmet for motorcycle and electric bicycle users
3.10
basic plane
plane passing through the center of left/right porus acusticus externus and the lower edge
of eye sockets of the testing headform
Note: See plane O-O′ in Figure 1.
2
https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by [email protected]
Center of porus acusticus Lower edge of eye sockets
externus
Figure 1 Side view of the basic plane (O-O')
3.11
reference plane
plane parallel to the basic plane at a certain distance above it
Note: See Figure 2 for the reference plane. The distance x is determined by the model of testing
headform.
Dimensions in millimeters
Central vertical axis
Reference plane
Basic plane
Keys:
x——the vertical distance from the basic plane to the reference plane;
y——the vertical distance from the reference plane to the top of the testing headform.
A-A′ is the lower edge plane of protecting section of type A3 helmet and type B3 helmet, and also the
auxiliary plane for other types of helmets to set up protecting section.
Figure 2 Reference plane
3
https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by [email protected]
3.12
vertical median plane
longitudinal plane passing through the apex of the testing headform, vertical to the base
plane, and dividing the testing headform into two symmetrical parts
3.13
protecting section
scope of head protected by the helmet for motorcycle and electric bicycle users
3.14
testing section
section within which the impact energy absorption performance and penetration
resistance of helmet for motorcycle and electric bicycle users are inspected
4 Product classification
4.1 Types
4.1.1 Helmets for motorcycle and electric bicycle users (hereinafter referred to as
“helmets”) may be classified into type A helmets and type B helmets by suitable object.
Type A helmet is helmet for motorcycle users, applicable to both motorcycle and electric
bicycle users; type B helmet is helmet for electric bicycle users, only applicable to electric
bicycle users.
4.1.2 Helmets may be classified into type 1 helmet, type 2 helmet and type 3 helmet by
shape. Type 1 helmet is full helmet, type 2 helmet is 3/4 helmet and type 3 helmet is 1/2
helmet, as shown in Figure 3. The type, shape and suitable object of helmets shall meet
the requirements of Table 1.
a) Type 1 helmet (full helmet) b) Type 2 helmet (3/4 helmet) c) Type 3 helmet (1/2 helmet)
Figure 3 Helmet shape
