RUT906

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice.
 DATASHEET // RUT906

HARDWARE

FRONT VIEW

LAN Ethernet WAN

ports Ethernet port

LAN LEDs RS485 interface

WAN LED
Power
socket Mobile signal
strength
indication LEDs

Power LED Mobile connection

status LED
RS232 Input/output
interface connector

BACK VIEW

Mobile AUX antenna Mobile MAIN antenna

connector (SMA female) connector (SMA female)
GPS antenna connector
(SMA female)

SIM1 slot SIM2 slot

Wi-Fi antenna connector Wi-Fi antenna connector

(RP-SMA female) (RP-SMA female)

USB Reset SIM

port button needle

POWER SOCKET PINOUT

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 2
 DATASHEET // RUT906

FEATURES

MOBILE
Mobile module 4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps

3GPP Release Release 9

3GPP Release Release 10/11 depending on the hardware version

2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data
SIM switch
connection fail, SIM idle protection
IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI),
Status
SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS,
SMS
scheduled SMS, SMS autoreply, SMPP

USSD Supports sending and reading Unstructured Supplementary Service Data messages

Black/White list Operator black/white list (by country or separate operators)

Band management Band lock, Used band status display

When working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it,
SIM idle protection service
meaning that no data is used on the card until then
SIM PIN code management SIM PIN code management enables setting, changing, or disabling the SIM card's PIN

APN Auto APN

Bridge Direct connection (bridge) between mobile ISP and device on LAN

Passthrough Router assigns its mobile WAN IP address to another device on LAN

WIRELESS
Wireless mode 802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)

WPA2-Enterprise - PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes,
Wi-Fi security
client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect

SSID/ESSID ESSID stealth mode

Wi-Fi users Up to 100 simultaneous connections

Wireless Connectivity Features Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)

Wireless MAC filter Whitelist, blacklist

Wireless QR code generator Once scanned, a user will automatically enter your network without needing to input login information

ETHERNET
WAN 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX

LAN 3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

NETWORK
Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP,
Network protocols
Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall Port forward, traffic rules, custom rules

Firewall status page View all your Firewall statistics, rules, and rule counters

Ports management View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on

Network topology Visual representation of your network, showing which devices are connected to which other devices
Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication,
Hotspot internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations,
user management, 9 default customisable themes and optionality to upload and download customised hotspot themes

DHCP Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards

QoS / Smart Queue

Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
Management (SQM)

DDNS Supported >25 service providers, others can be configured manually

DNS over HTTPS DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS

Network backup Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

Load balancing Balance Internet traffic over multiple WAN connections

SSHFS Possibility to mount remote file system via SSH protocol

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 3
 DATASHEET // RUT906

SECURITY
Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login
Authentication
attempts block, time-based login blocking, built-in random password generator

Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN,
Attack prevention
SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN Port and tag-based VLAN separation

Mobile quota control Mobile data limit, customizable period, start time, warning limit, phone number

WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access control Flexible access control of SSH, Web interface, CLI and Telnet

SSL certificate generation Let's encrypt support

VPN
OpenVPN Multiple clients and a server can run simultaneously, 27 encryption methods

DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,
BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128,
OpenVPN Encryption AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB
192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256,
AES-256-OFB 256, AES-256-CBC 256

XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8,
IPsec
AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE GRE tunnel, GRE tunnel over IPsec support

PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN Method of building scalable IPsec VPNs

SSTP SSTP client instance support

ZeroTier ZeroTier VPN client support

WireGuard WireGuard VPN client and server support

Tinc Tinc offers encryption, authentication and compression in it's tunnels. Client and server support

BACNET
Supported connection types RS485, TCP

Supported modes Router

OPC UA
Supported modes Client, Server

Supported connection types TCP

MODBUS
Supported modes Server, Client

Supported connection types RTU (RS232, RS485), TCP, USB

MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS
Custom registers
TCP Client functionality
8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB,
Supported data formats
BADC), HEX, ASCII

DATA TO SERVER
Protocol HTTP(S), MQTT, Azure MQTT, Kinesis
Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting,
Data to server
allowing scripts to utilize the router's Data to server feature

MQTT GATEWAY
Modbus MQTT Gateway Allows sending commands and receiving data from MODBUS Server through MQTT broker

DLMS
DLMS Support DLMS - standard protocol for utility meter data exchange

Supported modes Client

Supported connection types RS232, RS485, TCP

API
Teltonika Networks Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more informa-
Web API (beta) support tion, please refer to this documentation: https://developers.teltonika-networks.com

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 4
 DATASHEET // RUT906

MONITORING & MANAGEMENT

HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability
WEB UI
notifications, event log, system log, kernel log, Internet status
FOTA Firmware update from server, automatic notification

SSH SSH (v1, v2)

SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET

Call Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off

TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT MQTT Broker, MQTT publisher

SNMP SNMP (v1, v2, v3), SNMP Trap, Brute force protection

JSON-RPC Management API over HTTP/HTTPS

MODBUS Teltonika Remote Management System (RMS)

IoT PLATFORMS
Clouds of things Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection
ThingWorx
Type, Operator, Signal Strength. Has reboot and firmware upgrade actions
Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which
Cumulocity allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that
allows zero-touch device provisioning to IoT Hubs

SYSTEM CHARACTERISTICS
CPU Mediatek, 580 MHz, MIPS 24KEc

RAM 128 MB, DDR2

FLASH storage 16 MB, SPI Flash

FIRMWARE / CONFIGURATION
WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup

FOTA Update FW

RMS Update FW/configuration for multiple devices at once

Keep settings Update FW without losing current configuration

A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's
Factory settings reset
configuration

FIRMWARE CUSTOMISATION
Operating system RutOS (OpenWrt based Linux OS)

Supported languages Busybox shell, Lua, C, C++, and Python, Java in Package manager

Development tools SDK package with build environment provided

You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements
GPL customization
in our firmware to fit your or your clients’ needs

Package Manager The Package Manager is a service used to install additional software on the device

LOCATION TRACKING
GNSS GPS. (GLONASS, BeiDou, Galileo and QZSS - under development)

Coordinates GNSS coordinates via WebUI, SMS, TAVL, RMS

NMEA NMEA 0183

NTRIP NTRIP protocol (Networked Transport of RTCM via Internet Protocol)

Server software Supported server software TAVL, RMS

Geofencing Configurable multiple geofence zones

SERIAL
RS232 DB9 connector, RS232 (with RTS, CTS flow control), 300 to 115200 baud rate

RS485 RS485 Full Duplex (4 wires) and Half-Duplex (2 wires), 300-230400 baud rate

Serial functions Console, Serial over IP, Modem

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 5
 DATASHEET // RUT906

USB
Data rate USB 2.0

Applications Samba share, USB-to-serial

External devices Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter

Storage formats FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4

INPUT / OUTPUT
1 x digital dry input (0 - 3 V), 1 x digital galvanically isolated input (0 - 30 V), 1 x analog input (0 - 24 V), 1 x Digital non-isolated
Input
input (on 4-pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high)
1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA,
Output
on 4-pin power connector)

Events Email, RMS, SMS

I/O juggler Allows to set certain I/O conditions to initiate event

SD CARD
Physical size Micro SD (internal)

Applications Samba share, Storage Memory Expansion, DLNA

Capacity Up to 64 GB

Storage Formats FAT32, NTFS, ext2, ext3, ext4

POWER
Connector 4-pin industrial DC power socket

Input voltage range 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt
PoE (passive)
standards, Mode B, 9 - 30 VDC

Power consumption < 2 W idle, < 7 W Max

PHYSICAL INTERFACES
Ethernet 4 x RJ45 ports, 10/100 Mbps

I/O’s 2 x Inputs and 2 x Outputs on 10-pin industrial socket, 1 x Digital input and 1 x Digital output on 4-pin power connector

Status LEDs 1 x Bi-color connection status, 5 x Mobile connection strength, 4 x ETH status, 1 x Power

SIM 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)

Power 1 x 4-pin power connector

Input/output 1 x 10-pin industrial socket for inputs/outputs

Antennas 2 x SMA for LTE, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS

USB 1 x USB A port for external devices

RS232 1 x DB9 socket

RS485 1 x 6-pin industrial socket

Reset Reboot/User default reset/Factory reset button

PHYSICAL SPECIFICATION
Casing material Aluminium housing, plastic panels

Dimensions (W x H x D) 109.5 x 50 x 100 mm

Weight 295 g

Mounting options DIN rail, wall mount, flat surface (all require additional kit)

OPERATING ENVIRONMENT
Operating temperature -40 °C to 75 °C

Operating humidity 10% to 90% non-condensing

Ingress Protection Rating IP30

REGULATORY & TYPE APPROVALS

Regulatory CE, UKCA, RCM, CB, E-mark

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 6
 DATASHEET // RUT906

EMC EMISSIONS & IMMUNITY

EN 55032:2015+A11:2020
Standards
EN 55035:2017+A11:2020
EN 61000-3-3:2013+A1:2019+A2:2021
EN IEC 61000-3-2:2019+A1:2021
EN 301 489-1 V2.2.3
EN 301 489-17 V3.2.4
EN 301 489-19 V2.2.0
EN 301 489-52 V1.2.1

ESD EN 61000-4-2:2009

Radiated Immunity EN IEC 61000-4-3:2020

EFT EN 61000-4-4:2012

CS EN 61000-4-6:2014

DIP EN IEC 61000-4-11:2020

Standards CE: EN 62311 CB: IEC 62368-1:2018

RF

EN 301 908-1;
EN 301 908-2;
Standards
EN 301 908-13;
EN 300 328;

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 7
 DATASHEET // RUT906

STANDARD PACKAGE*

• Router RUT906
• 9 W PSU
• 2x Mobile antennas (magnetic mount, SMA male, 3 m cable)
• 2x Wi-Fi antennas (magnetic mount, RP-SMA male, 1.5 m cable)
• GNSS antenna (adhesive, SMA male, 3 m cable)
• RS485 connector block
• I/O connector block
• Ethernet cable (1.5 m)
• SIM Adapter kit
• QSG (Quick Start Guide)
• Packaging box

ROUTER RUT906

9 W PSU 2X MOBILE ANTENNAS (MAGNETIC 2X WI-FI ANTENNAS (MAGNETIC MOUNT,

MOUNT, SMA MALE, 3 M CABLE) RP-SMA MALE, 1.5 M CABLE)

GNSS ANTENNA (ADHESIVE, SMA MALE, RS485 CONNECTOR BLOCK I/O CONNECTOR BLOCK
3 M CABLE)

ETHERNET CABLE (1.5 M) SIM ADAPTER KIT QSG

* Standard package contents may differ based on standard order codes.

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 8
 DATASHEET // RUT906

CLASSIFICATION CODES
HS Code: 851762
HTS: 8517.62.00

For more information on all available packaging options – please contact us directly.

AVAILABLE VERSIONS
HARDWARE VERSION SUPPORTED FREQUENCIES STANDARD ORDER CODE / PACKAGE CONTAINS

RUT906000000 / Standard package with EU PSU

RUT906000200 / Standard package with UK PSU
RUT906 0***** 4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B28
RUT906000800 / Standard package with AU PSU
Europe1, The Middle East, 4G (LTE-TDD): B38, B40, B41
RUT906000300 / Standard package with Power cable with
Africa, Thailand, Australia, 3G: B1, B8
4-way screw terminal
New Zealand 2G: B2, B8
RUT906000400 / Standard package with Universal PSU
RUT906000100 / Mass packing code

The price and lead-times for region (operator) specific versions may vary. For more information please contact us.
1 - Regional availability - excluding Russia & Belarus.

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 9
 DATASHEET // RUT906

RUT906 SPATIAL MEASUREMENTS

MAIN MEASUREMENTS
W x H x D dimensions for RUT906:
Device housing*: 110 x 50 x 100 mm
Box: 355 x 60 x 175 mm
*Housing measurements are presented without antenna connectors and screws; for measurements of other device elements look to the sections below.

TOP VIEW
The figure below depicts the measurements of RUT906 and its components as seen from the top:

RIGHT VIEW
The figure below depicts the measurements of RUT906 and its components as seen from the right side:

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 10
 DATASHEET // RUT906

FRONT VIEW
The figure below depicts the measurements of RUT906 and its components as seen from the front panel side:

REAR VIEW
The figure below depicts the measurements of RUT906 and its components as seen from the back panel side:

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 11
 DATASHEET // RUT906

MOUNTING SPACE REQUIREMENTS

The figure below depicts an approximation of the device's dimensions when cables and antennas are attached:

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 12
 DATASHEET // RUT906

DIN RAIL
The scheme below depicts protrusion measurements of an attached DIN Rail:

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 13