HA35-22 V100R001 Maintenance
Manual
Issue V1.00
Date 2025-02-18
Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei").
The product described in this manual may include copyrighted software of Huawei and possible
licensors. Customers shall not in any manner reproduce, distribute, modify, decompile,
disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software,
unless such restrictions are prohibited by applicable laws or such actions are approved by
respective copyright holders.
Trademarks and Permissions
, , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their
respective owners.
Notice
Some features of the product and its accessories described herein rely on the software installed,
capacities and settings of local network, and may not be activated or may be limited by local
network operators or network service providers. Thus the descriptions herein may not exactly
match the product or its accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any information or
specifications contained in this manual without prior notice or obligation.
DISCLAIMER
ALL CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY
APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,
RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL
HUAWEI BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL
DAMAGES, OR LOSS OF PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR
ANTICIPATED SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE OR
NOT.
THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR
PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF
HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL
BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS
PRODUCT.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and will obtain all
necessary governmental permits and licenses in order to export, re-export or import the product
mentioned in this manual including the software and technical data therein.
Privacy Policy
To better understand how we protect your personal information, please see the privacy policy at
http://consumer.huawei.com/privacy-policy.
HA35-22 V100R001 Maintenance Manual
Restricted Disclosure
Catalog
1 Upgrade Interface...................................................................5
1.1 Multicast Upgrade.................................................................................................................................5
1.2 Urgent Restoring Mode of Local Upgrade........................................................................................6
1.3 User Multicast Upgrade......................................................................................................................7
2 Default Setting.......................................................................8
2.1 Management Account............................................................................................................................8
2.2 Key(Restricted Disclosur & only open to Operator).............................................................................8
3 Security Risk Description........................................................9
4 Acronyms and Abbreviations...................................................9
Huawei Proprietary and Confidential
Issue V1.00(2025-02- Page 4 of 11
18) Copyright © Huawei Technologies Co., Ltd.
HA35-22 V100R001 Maintenance Manual
Restricted Disclosure
About This Document
Related Versions
The following table lists the product versions related to this document.
Product Name Version
HA35-22 V100R001
Intended Audience
This document is intended for:
Installation and commissioning engineers
Technical support engineers
Operator/Carrier
Safety Statement
This non-public document is applied to equipment maintenance, repair and other
scenes. Customer should follow the requirements herein, without the permission
of Huawei, the content of this article and the corresponding tool will not be
allowed to realeased to public.
Revision
Modified records accumulate update notes each time. The latest version of the
document contains all previous updated versions.
Issue 01 (2015-10-30)
First official release.
Huawei Proprietary and Confidential
Issue V1.00(2025-02- Page 5 of 11
18) Copyright © Huawei Technologies Co., Ltd.
HA35-22 V100R001 Maintenance Manual
Restricted Disclosure
1 Upgrade Interface
This chapter describes all the upgrade related tools, URL and command interface.
1.1 Multicast Upgrade
Summary
Via this feature software upgrade of single or batch gateway device can be performed
at LAN side. In the production, rework, maintenance is needed.
Use Case
Case 1： We can use this feature to do the batch rework when we need to upgrade the
software on devices which has not yet shipped.
Case 2： We can use this feature to do the batch rework when we need to upgrade the
software on devices which is shipped to customer’s storehouse.
Description
The multicast upgrade tool which provided by Huawei is running on PC from LAN
side. PC connects the gateway devices through a LANswitch and multicast the
software to them. If gateway device detects the multicast packets on bootloader setup,
the device will receive the whole software and do upgrade.
Huawei Proprietary and Confidential
Issue V1.00(2025-02- Page 6 of 11
18) Copyright © Huawei Technologies Co., Ltd.
HA35-22 V100R001 Maintenance Manual
Restricted Disclosure
Security Consideration
1 ， This feature is not open to the public and must using the Huawei proprietary
multicast upgrade tools.
2 ， This feature is running only on bootloader setup process and close on normal
operating state.
3 ， The gateway will check the signature of the software to avoid upgrade illegal
image. Only Huawei authentication signature software package can be upgrade on
device.
1.2 Urgent Restoring Mode of Local Upgrade
Summary
This feature provides a way to upgrade the software on LAN side when the device is in
a abnormal states.
Use Case
When the device system is not running well, you can use this feature to upgrade and
recover the device.
Description
When the device system is not running well, Huawei provides a way to recover and re-
upgrade the software. Customer can hold the rest key for more than 10s while power
on the device to enter the urgent restoring mode.
PC sets the static IP address with 10.0.0.X, and brower the
http://10.0.0.138/upload.html , then upgrade the software following the introduction.
No support version which name has lte.
Security Consideration
1， This feature is not open to the public.
2 ， The gateway will check the signature of the software to avoid upgrade illegal
image. Only Huawei authentication signature software package can be upgrade on
device.
Huawei Proprietary and Confidential
Issue V1.00(2025-02- Page 7 of 11
18) Copyright © Huawei Technologies Co., Ltd.
HA35-22 V100R001 Maintenance Manual
Restricted Disclosure
1.3 User Multicast Upgrade
Summary
This feature uses multicast upgrade tool automatically identify large image file header
information, parse out the motherboard and slaveboard upgrade package, alternately
sending packets between mainboard and slaveboard.
Use Case
After the multicast upgrade tool is turned on, the board will need to restart the
gateway，and to upgrade the mainboard and slaveboard Simultaneously。
Description
The User Multicast Upgrade progress will start after cms init，Opened udp socket
listener determine whether has any multicast upgrade package , the waiting time to
monitor is currently set to 60 seconds。New multicast tool can automatically identify
large image file header information，resolving mainboard and slaveboard upgrade
image from big image automatically，then alternately sending packets between
mainboard and slaveboard。ATP processing is serial，first received slaveboard upgrade
packets，then next receive mainboard upgrade packets。Since a long time to write
flash，and upgrade is serial processing，so memory is enough。 Received packets
saved to /var directory，if it is slaveboard image file, then copy the file to online
partition，then send message to salveboard to upgrade；if it is mainboard image
file，then directly upgrade 。After upgrade completely, upg process remains suspended
waiting for the user to manually restart the board。
Security Consideration
1，This feature is not open to the public.
2 ， The gateway will check the signature of the software to avoid upgrade illegal
image. Only Huawei authentication signature software package can be upgrade on
device.
Huawei Proprietary and Confidential
Issue V1.00(2025-02- Page 8 of 11
18) Copyright © Huawei Technologies Co., Ltd.
HA35-22 V100R001 Maintenance Manual
Restricted Disclosure
2 Default Setting
This chapter describes all the default password and security setting. This default
password and security setting maybe not perform on user’s manual.
2.1 Management Account
WEB
Provide super – user manage / administrator account /open to Operator.
Administrator user name: Telek0m(customized), Default Password:
Austria&Eur0(customized). It can be changed via web UI.
Normal user name: admin(customized), Default Password:empty(customized, force to
change at first access). It can be changed via web UI.
Super user name: tccadmin , Default Password: psw4tcc(customized). It can be
changed via web UI or ACS. Before the first time to use the Super user, it should be
use the WAN side ACS tool to add.
TR069
Username used to authenticate the HA35-22 V100R001 when making a connection to
the ACS: HA35-22(customized), Default Password：M3m2zA2d (customized). These
can be changed by TR069.
Username used to authenticate an ACS when making a Connection Request to the
HA35-22 V100R001: Product-Serialnumber(customized), Default Password: Mac-
address(customized). These can be changed by TR069.
TR064
HA35 supports connection to TR064 tool, the username for
TR064 is fixed to “dslf-config”, and the default password :
agn93Pvpx. The action of SetConfigPassword is been
used to change the password.
Huawei Proprietary and Confidential
Issue V1.00(2025-02- Page 9 of 11
18) Copyright © Huawei Technologies Co., Ltd.
HA35-22 V100R001 Maintenance Manual
Restricted Disclosure
Key(Restricted Disclosur & only open to Operator)
Image, configuration file, Sensitive Data are protected by public Encryption Algorithm. Each Encryption
Algorithm and key is different, more information please contact
[email protected].
3 Security Risk Description
ACS Server security risks
WAN side currently supports HTTP / HTTPS, when gateway docking acs ，because
HTTP transmitted content without encryption，such information during transmission
easily be stolen and easy to malicious use， will result in a loss。We recommend using
a secure HTTPS data transfer。
When there is only LTE wan UP, the ACS remote management and downloading the
software packet will cost the users’ traffic, and there is no remined information in the
web UI.
Huawei Proprietary and Confidential
Issue V1.00(2025-02- Page 10 of 11
18) Copyright © Huawei Technologies Co., Ltd.
HA35-22 V100R001 Maintenance Manual
Restricted Disclosure
4 Acronyms and Abbreviations
Table 5-1 Acronyms and abbreviations list
Abbreviatio Full name
n
HG Home Gateway
NFF Not Found Fault
LAN Local Area Network
WAN Wide Area Network
PC Personal Computer
CWMP CPE WAN Management Protocol
URL Universal Resource Locator
Huawei Proprietary and Confidential
Issue V1.00(2025-02- Page 11 of 11
18) Copyright © Huawei Technologies Co., Ltd.
