Conformity Statement No.
IECRE.WE.CS.22.0117-R1
IECRE - IEC System for Certification
to Standards Relating to Equipment DESIGN EVALUATION
for Use in Renewable Energy CONFORMITY STATEMENT
Applications
Wind Turbine
WEG Industries (India) Private Limited
This conformity statement is issued to Plot No. E-20 (North) Sipcot Indl. Complex Phase - II,
Expansion - II
Mornapalli Village, Hosur, Tamil Nadu, 635109
India
and
WEG Equipamentos Elétricos S.A.
Av. Prefeito Waldemar Grubba, 3300, Vila Lalau
Jaraguá do Sul, SC 89256-900
Brazil
for the wind turbine AGW 147/4.2
class, standard (if applicable) IIIB/S, IEC 61400-1, 2019-02
The conformity evaluation was carried out in accordance with the rules and procedures of the IECRE System
www.iecre.org
This conformity statement attests compliance with the operational documents of the IECRE system and applicable
technical standards such as the IEC 61400 series as specified in subsequent pages. It is based on the following reference
documents:
Evaluation report(s) see Annex I
Dated
The wind turbine type specification begins on page 2 of this conformity statement.
Changes in the system design or the manufacturer’s quality system are to be approved by the Certification Body. Without
approval, the certificate loses its validity.
Approved for issue on behalf of the IECRE Certification Body:
UL Renewables
Federico Osvald
Vice Head of Certification Body
Bremen 28.02.2023 DEWI-OCC GmbH
Contrescarpe 45
28195 Bremen
Conformity Statement No.
IECRE.WE.CS.22.0117-R1
IECRE - IEC System for Certification
to Standards Relating to Equipment DESIGN EVALUATION
for Use in Renewable Energy CONFORMITY STATEMENT
Applications
Wind Turbine
Annex I
This conformity statement is based on the following reference documents:
Design basis evaluation
DEWI-OCC GmbH: Evaluation Report
“Evaluation Report Design Basis Wind Turbine AGW 147/4.2MW 50/60Hz”,
Doc. No. R13268522-0 Rev. 2, 2020-12-07
Loads and load cases
DEWI-OCC GmbH: Evaluation Report
“Evaluation Report Load Assumptions Wind Turbine AGW 147/4.2MW 50Hz Wind Class S”,
Doc. No. R13268522-1a Rev. 3, 2023-02-28
DEWI-OCC GmbH: Evaluation Report
“Evaluation Report Load Assumptions Wind Turbine AGW 147/4.2MW 50Hz Wind Class IIIB”,
Doc. No. R13268522-1b Rev. 2, 2020-11-23
DEWI-OCC GmbH: Evaluation Report
“Evaluation Report Load Envelope Wind Turbine AGW 147/4.2MW 50/60Hz Wind Class S and
IIIB”,
Doc. No. R13268522-1c Rev. 2, 2020-12-07
Control and protection system
DEWI-OCC GmbH: Evaluation Report
“Evaluation Report Control and Protection System and Manuals Wind Turbine AGW
147/4.2MW 50/60Hz”,
Doc. No. R13268522-2 Rev. 1, 2020-12-22
Rotor blades
DEWI-OCC GmbH: Evaluation Report
“Evaluation Report Rotor Blade WB720-4.2-F55G3S1 Design Evaluation”,
Doc. No. R13268522-3 Rev. 0, 2020-12-15
Machine and structural components
DEWI-OCC GmbH: Evaluation Report
“Evaluation Report Machinery Components for Wind Turbine AGW 147/4.2MW 50/60 Hz”,
Doc. No. R13268522-4 Rev. 3, 2021-12-20
2/10
Conformity Statement No.
IECRE.WE.CS.22.0117-R1
IECRE - IEC System for Certification
to Standards Relating to Equipment DESIGN EVALUATION
for Use in Renewable Energy CONFORMITY STATEMENT
Applications
Wind Turbine
Tower
DEWI-OCC GmbH: Evaluation Report
“Evaluation Report Tower Wind Turbine AGW 147/4.2 Precast Concrete Tower with Steel or
Cast Adaptor 60 Hz”,
Doc. No. R13268522-5 Rev. 0, 2021-02-18
DEWI-OCC GmbH: Evaluation Report
“Evaluation Report Tower Wind Turbine AGW 147/4.2 Tubular Steel tower 50/60Hz”,
Doc. No. R13522856-5 Rev. 0, 2020-12-08
Electrical components
DEWI-OCC GmbH: Evaluation Report
“Evaluation Report Electrical Components Wind Turbine AGW 147/4.2 50/60Hz”,
Doc. No. R13268522-6 Rev. 1, 2022-01-14
Personnel safety
DEWI-OCC GmbH: Evaluation Report
“Evaluation Report Control and Protection System and Manuals Wind Turbine AGW
147/4.2MW 50/60Hz”,
Doc. No. R13268522-2 Rev. 1, 2020-12-22
3/10
Conformity Statement No.
IECRE.WE.CS.22.0117-R1
IECRE - IEC System for Certification
to Standards Relating to Equipment DESIGN EVALUATION
for Use in Renewable Energy CONFORMITY STATEMENT
Applications
Wind Turbine
Annex II
Machine parameters:
Power regulation: Pitch controlled
Rotor orientation: Upwind
Number of rotor blades: 3
Rotor tilt: 6 deg
Cone angle: 4 deg
Rated power: 4200 kW
Rated wind speed Vr: 10 m/s
Rotor diameter: 147 m
Hub height(s): 120 m (class IIIB)
125 m (class S)
Hub height operating wind speed range Vin – Vout: 3 m/s – 20 m/s
Design life time: 20 years
Software version: WEG_Control_v1.30
Wind conditions:
Characteristic turbulence intensity Iref at Vhub = 15 m/s: 14 %
Annual average wind speed at hub height Vave : 7.5 m/s (class IIIB)
9 m/s (class S)
Reference wind speed Vref : 37.5 m/s
Mean flow inclination: 8º
Hub height 50-year extreme wind speed Ve50: 52.5 m/s
Electrical network conditions:
Normal supply voltage and range: 862V (± 10%) MSC
925 V (± 10%) LSC
Normal supply frequency and range: 50 Hz (± 2 Hz) (class IIIB)
60 Hz (± 2 Hz) (class S)
Voltage imbalance: 2% as per IEC 61400-1 Ed.4
Maximum duration of electrical power network outages: 6h as per IEC 61400-1 Ed.4
Number of electrical network outages 20/y
4/10
Conformity Statement No.
IECRE.WE.CS.22.0117-R1
IECRE - IEC System for Certification
to Standards Relating to Equipment DESIGN EVALUATION
for Use in Renewable Energy CONFORMITY STATEMENT
Applications
Wind Turbine
Other environmental conditions (where taken into account):
Design conditions in case of offshore WT : n/a
Normal and extreme temperature ranges: -10 °C to +40 °C
-20°C to +50 °C
as per IEC 61400-1 Ed.4
Relative humidity of the air: up to 95%
as per IEC 61400-1 Ed.4
Air density: 1.16 kg/m³ (class IIIB)
1.18 kg/m³ (class S)
Solar radiation: 1000 W/m2
as per IEC 61400-4 Ed.4
Lightning protection system (standard and protection
class): IEC 61400-24 Ed. 1.0, LPL I
Earthquake model and parameters (standard and key n/a
parameters e.g. spectrum, model, seismic zone, soil class,
etc.):
Other design conditions : n/a
5/10
Conformity Statement No.
IECRE.WE.CS.22.0117-R1
IECRE - IEC System for Certification
to Standards Relating to Equipment DESIGN EVALUATION
for Use in Renewable Energy CONFORMITY STATEMENT
Applications
Wind Turbine
Major components:
*If not otherwise stated, the certificate holder
is the manufacturer.
Blade:
Type: WB720-4.2-F55G3S1
Material: Glass fiber reinforced epoxy resin, PET and Balsa
Blade length: 72 m
Number of blades: 3
Manufacturer*: Aeris
Drawing / Data sheet / Part No.: 00259-01 - 15-09.02.01
Blade bearing (Option 1):
Type: 2 ROW BALL SLEWING RING BEARING
Manufacturer: Liebherr-Components Biberach GmbH
Drawing / Data sheet / Part No.: KUD03347-070WJ18-001-000 Rev. 00.18
Blade bearing (Option 2):
Type: 2 ROW BALL SLEWING BEARING
Manufacturer: thyssenkrupp rothe erde Germany GmbH
Drawing / Data sheet / Part No.: 092.70.3342_00.180820.D Rev. B
Drawing / Data sheet / Part No.: 092.70.3342.000.48.140D Rev. B
Blade bearing (Option 3):
Type: 8 POINT CONTACT BALL RADIAL BEARING
Manufacturer: SKF
Drawing / Data sheet / Part No.: 18698001 Rev. 0
Pitch System:
Motor / Actuator Type: 5FSNA84-150R01KD0.04-1
Pitch Controller Type: DEIF IMD 100 Integrated Motor Drive
Manufacturer: DEIF
6/10
Conformity Statement No.
IECRE.WE.CS.22.0117-R1
IECRE - IEC System for Certification
to Standards Relating to Equipment DESIGN EVALUATION
for Use in Renewable Energy CONFORMITY STATEMENT
Applications
Wind Turbine
Spindle:
Type: Casted
Manufacturer: WEG
Material: EN-GJS-400-18-LT
Drawing / Data sheet / Part No.: 10006289129 Rev. 5
10006289129 Rev. 12
Main bearing:
Type: Tapered roller bearings
Manufacturer: Schaeffler Technologies AG & Co. KG
Drawing / Data sheet / Part No.: EDD F-634362.TR1-WPOS 000 Rev. 0 (Rotor side)
EDD F-621203.01.TR1-WPOS 000 Rev. AA (Generator
side)
Yaw System:
Drive Type: 8 active yaw drives
Special gearbox 712 T5 with motor adapter IEC-100
Manufacturer: BONFIGLIOLI TRASMITAL
Drawing / Data sheet / Part No.: I7120T024400 Rev. 2
Bearing Type: 2 ROW BALL SLEWING RING BEARING
Manufacturer: Liebherr-Components Biberach GmbH
Drawing / Data sheet / Part No.: KUD02892-070WA18-001-000 Rev. 00.13
KUD02892-070WA18-001-000 Rev. 01.1
Brake Type: HYDRAULIC ACTIVE DISC BRAKE BSAB 120-S-550
Manufacturer: Svendborg Brakes
Drawing / Data sheet / Part No.: 1010-0072-631 Rev. A
Generator:
Type AGW 4.2-147
Manufacturer: WEG
Rated Power: 4366 kW
Rated Frequency: 6.71 - 14.3 Hz
7/10
Conformity Statement No.
IECRE.WE.CS.22.0117-R1
IECRE - IEC System for Certification
to Standards Relating to Equipment DESIGN EVALUATION
for Use in Renewable Energy CONFORMITY STATEMENT
Applications
Wind Turbine
Rated Speed: 11.0 rpm
Max. speed: 13.0 rpm
Rated Voltage: 850 V
Rated Current: 4086 A
Insulation Class: H
Degree of Protection: IP34
Converter:
Type: WCW4400 (comprised of two WCW2200 cabinets)
Manufacturer: WEG
Rated Voltage (grid side): 862 V / 925 V (±10%)
Rated Current (grid side): 4200 A / 3180 A
Degree of Protection: IP54
Transformer Option 1 (class IIIB):
Type: Oil filled transformer
Manufacturer: Wilson Power and Distribution Technologies
Rated Voltage: 33 kV / 0.925 kV
Rated Power: 4421 kVA
Frequency: 50 Hz
Degree of Protection: n/a
Location (e.g. tower bottom): Nacelle
Transformer Option 2 (class S):
Type: Oil filled transformer
Manufacturer: Hitachi ABB
Rated Voltage: 34.5 (+ 1x2.5%) kV / 0.925 kV
Rated Power: 4420 kVA
Frequency: 60 Hz
Degree of Protection: n/a
Location (e.g. tower bottom): Nacelle
8/10
Conformity Statement No.
IECRE.WE.CS.22.0117-R1
IECRE - IEC System for Certification
to Standards Relating to Equipment DESIGN EVALUATION
for Use in Renewable Energy CONFORMITY STATEMENT
Applications
Wind Turbine
Tower Option 1 (class IIIB)
Type: Tubular steel tower
Manufacturer: WEG
Sections: 7
Length: 118 m
Drawing / Data sheet / Part No.: D-027-001-TOW-00-00-00-00-000-A Rev. D
Tower Option 2 (class S):
Type: Precast concrete tower
Manufacturer: WEG
Sections: 7
Length: 121,36 m
Drawing / Data sheet / Part No.: CAL001-GEO-000-01-05
Foundation:
Type: n/a
Manufacturer: n/a
Drawing / Data sheet / Part No: n/a
Foundation Adaptor:
Type: n/a
Manufacturer: n/a
Drawing / Data sheet / Part No.: n/a
Manuals:
Operation & maintenance manual: Wind Turbines AGW 147/4.X Operation and Maintenance
Manual,
Doc. No. 10007776335 Rev. 3
Wind Turbines AGW 147/4.X Mechanical Preventive
Maintenance Protocol,
Doc. No. 10007780644 Rev. 2
Wind Turbines AGW 147/4.X Electrical Preventive
Maintenance Protocol,
Doc. No. 10007771565 Rev. 1
9/10
Conformity Statement No.
IECRE.WE.CS.22.0117-R1
IECRE - IEC System for Certification
to Standards Relating to Equipment DESIGN EVALUATION
for Use in Renewable Energy CONFORMITY STATEMENT
Applications
Wind Turbine
Transport manual: Cargo PlanWind Generator 4.2 MW,
Doc. No. 10007877618 Rev. 0
Doc. No. 10007891294 Rev. 0
Doc. No. 10007893783 Rev. 0
Installation & commissioning manual: Wind turbine AGW 147/4.X 10007921156 – Mechanical
Assembly Manual,
Doc. No. 10007921156 Rev. 1
LIFTING WIND GENERATOR 4.2MW,
Doc. No. 10007878272 Rev. 0
Doc. No. 10007891520 Rev. 0
Doc. No. 10007893707 Rev. 0
Wind Turbines AGW 147/4.X Commissioning Manual,
Doc. No. 10007771165 Rev. 0
Wind Turbines AGW 147/4.X Commissioning Checklist,
Doc. No. 10007772147 Rev. 0
Outstanding issues: n/a
10/10
