封底和封面背面留白,书本形式

封底 封面
120.00 mm

PRODUCT DISCLAIMERS PRODUCT PARAMETER PRODUCT INSTALLATION 2 Insert the diffuser from the side of the light panel. 4 There are two power supply modes to choose. ACCESSORIES 2 Desktop Light Stand : DESCRIPTION OF FUNCTION INSTRUCTION & Master mode: adjust the light and channel of the light through the controller In APP mode, connect to APP and adjust hue through APP. ⑩ On-line control (Joint control between lamps and lanterns): APP CONNECTION AND USE AND SIMPIE FAULTS Phenomenon Check the product Troubleshooting PACKING
C O N T E N T S INTRODUCTION 1. Before using this product, please read the instructions carefully and make sure
use the product correctly. If you don’t obey the instructions and warnings, you
Brand : GVM
STRUCTURE ANALYSIS METHOD ① Connect the power cord and adapter for power supply.
② Purchase two other suitable lithium batteries and use them for power
INSTALLATION METHOD
Only some packages include the following accessories, subject to the actual purchase of the package
① Loosen the A knob as shown in the figure below to clamp the lower end of
the lamp holder to the desktop, and then tighten the A knob to fix the lamp
PRODUCT CONTROL KEYS INSTRUCTION FOR USE behind the light, and the slaves of the same channel will also be adjusted
synchronously. ⑥ Adjust SAT: range 0%~100%
Prepare two or more photography lights, set one to Master mode, and the
others to Slave mode, and set the channel (CH) of the master and slave.
APP CONTROL
Scan the QR code on the back of the manual to download the APP
PRESERVATION
Do not put the product in a highly humid, strong electromagnetic field,
AND TROUBLESHOOTING ① In the Master mode / Rotate
LIST
Product Name : Photography lights External diffuser supply. ( both battery cells must be plugged in to power ) mode, lightly press the
Welcome to "GVM-800D-II". This product is specially designed for senior 1 The lamp can be installed and fixed on the bracket by rotating the knob holder on the desktop. APP mode: adjust the light parameters through APP. In Master mode / Rotate mode, short press the composite knob to switch When the master and slave channels are the same, the slave of the same Check the product Troubleshooting
maybe cause harm to yourself and the people around, or even damage the mounting screw hole ① LCD screen： direct sunlight, high-temperature environment. If not use the product for a Phenomenon compound knob button to Quantity
photography enthusiasts. The product is suitable for live / outdoor / studio Product Type : Photography Fill Light clockwise, and unloaded by rotating in the counterclockwise direction. 1 Light control folding : SC: CH:
channel can be synchronously controlled through the controller behind
Turn on the video light and set the mode to APP mode. Open the “GVM_LED” In RGB mode, Check whether the color purity
product and other things around. ② If the desktop is thick, you only need to loosen the B knob and C knob to Rotate Short press the compound knob to switch the light mode, which are: CCT, the light mode to SAT, and then turn the composite knob button to adjust long time, disconnect the power and take out the battery. switch to SAT, then turn the Name Notes
Light control folding can control the Angle of light. Slave The screen display the current brightness, control mode, light mode, light application software on the phone ( The phone needs to turn on bluetooth and the lamp beads SAT value is too low or 0; the
photography, and also for youtube video shooting. The main features of Product model : GVM-800D-II ① Check the matching power 800D- 800D- 800D- 800D-
Product introduction ------------------------------------------- Page 1 2. Once you use this product, you are deemed to have read the disclaimer and warning Soft light spot
locking mouth Align the front mounting holes with the screw holes of the hinges and lock
remove it, after adjusting E down, then install the B knob to the position of 7 Master
APP 4 parameters, scene number, channel numerical, and battery power of the light.
HUE, SAT; Long press the compound knob for 3 seconds to enter/exit the the color purity. the master.
GPS), then enter the bluetooth's search interface → Find the bluetooth
Clean：Before clean, disconnect the power plug. And use wet cloth rather than any
Clean：
adapter indicator light up
Make sure the adapter is well
have no RGB color purity value is 100, the
compound knob button to RGB RGB-2 RGB-3 RGB-2M
the product are: carefully, understand and acknowledge all the terms and contents of this statement, Product material : Aluminum alloy the original C knob, and install the C knob to D. At this time, proceed to scene mode. In APP mode, connect to APP and adjust SAT through APP. Prepare two or more photography lights, set one to APP mode, and detergent or soluble liquid, avoiding damaging the surface layer. contacted with the power plug. increase the color purity;
The switch color. color difference is most obvious.
Disclaimers -------------------------------------------------------- Page 2 and promise to take full responsibility for the use of this product and possible the latches with screws. CCT : HUE : O %
connect the mobile phone APP to set the channel; set the rest to Slave named “BT_LED” and connect → Wait for connection → After connect or not.
② In WIFI mode, connect APP, Photography
① Step-less adjustable RGB color and dual color temperature feature, color Lamp beads quantity : 252 step ① to install the light stand on a thicker desk. TIM : SAT : K ms
Channel CCT: adjustable color temperature, range 3200K~5600K Power：Make sure the power is in the demanded range, not too high or too low. Correctly
Power： indicator 1 2 3 2
consequences. LED lamp beads success, it will automatically enter the app's control interface. At this time, the a d j u s t c o l o r p u r e S AT lights
numerical mode, and set the same channel. When the APP mode machine connected
range 3200K ~ 5600k, with 252 LED bulbs, which is helpful to restore and Angle fixing knob ③ Loosen the knob of the lamp, install the lamp on the lamp holder as shown HUE: Adjustable light color, range 0°~360° ⑦ Adjustment scene (SC): range 1~8 load the battery, in order not the damage to machine. does not light up ② When using lithium battery,
Precautions ------------------------------------------------------- Page 2 Color rendering index : ≥97 MODE
3 Scene number SC: CH: Battery power
with the mobile phone APP and the slave machine channel are the same, video light have been connected and you can controll the APP. Charge the battery before using through APP.
160.00 mm

in the figure, and then tighten the knob. make sure there's no "low
enrich the color of objects and provide you with natural and vivid shooting Color temperature : 3200K~5600K (lights only when the SAT: adjustable light color saturation, range 0%~100% In Master mode/Rotate mode, long press for 3 seconds and press the Repairing：If there is fault or performance degradation, do not unpack the shell by
Repairing： it. Power cord 1 2 3 2
Product parameter --------------------------------------------- Page 3 ④ Loosen the F knob to adjust the height of
light mode is a scene) Rotate SC: The product can simulate 8 kinds of scene lights: ①Lightning, ②Police composite knob to enter/exit scene light (SC) mode. At this time, short
at this time, the connected APP mode machine can be controlled through You can save 6 custom light effects in “My Scenes”. After setting the light yourself, avoiding damage the machine and lose the right of maintenance. When there power" protection.
effect. U-frame
Hue : RGB 0°~360°
the lamp holder and tighten the F knob to 5 6 Slave Control mode car, ③Candlelight, ④TV, ⑤Bad light bulb, ⑥Party, ⑦Disco, ⑧Paparazzi.
the mobile phone APP, and the slave machine of the same channel as the effect parameters → click the “ ” icon in the right corner → pop up the is a fault, do not hesitate to contact us, and we will do our best to deal with the problem.
Lamp rack interface Brightness press the composite knob to select scenes, all scenes can be adjusted Adapter 1 2 3 2
Product structure analysis ------------------------------------ Page 4 ② App intelligent control system, which can be controlled by your intelligent SAT : 0%~100%
lock the height of the lamp holder.
Battery OFF Adapter
Master (Only display the current
control mode) APP mode machine can be synchronously controlled. “Save Current Scenes” → click “OK”. This light effect can be found in “My Accessories：Please use the accessories provided by manufacturer and approved
Accessories： The brightness/
Check if the mode were set as
by rotating the brightness adjustment knob; the current scene When it slave mode, lightness and color Pressthe“MODE”button for once,
mobile device. Brightness : 5000lux/0.5m, 1500lux/1m Lamp holder fixing knob Lamp rack interface 1 BRG CCT / HUE / SAT / SCE
APP Scenes” at this time. ones, in order to maximize the performance. color temperature
Installation method ---------------------------------------- Page 5,6,7 ③ Adjust brightness (BRG): range 0%~100% is scene No. ⑤, turn the compound knob to adjust the color temperature; temperature of the products switch the mode from slave mode
1 2 3 2
③ With an LCD screen and stable system, it supports 360° rotation and can PRECAUTIONS Light adjustment method : Step-less adjustment 2 The light mode
when the current scene is scene No. ⑥ or ⑦, turn the compound knob to If there is a slave, the APP will synchronously control the slave of the same Guarantee：Do does not modify the product, or you will lose the right of maintenance.
Guarantee：
knob is out of
cannot be controlled in slave to master mode.
Diffuser
3 Loosen the adjustment knobs on both sides of the U-bracket, adjust of the current CCT : HUE : O % Correlated Color
In Master mode / Rotate mode, turn the brightness adjustment knob to control
Accessories installation method ------------------------- Page 8,9 effectively control the light. You can also install folding and soft light adjustable channel as the connected APP mode machine. mode.
Light angle of lamp bead : 120° Batter y TIM : SAT : K ms adjust the time. (Other scenes can only adjust the brightness).
① Please use the matching power adapter or lithium battery with the same LCD display screen the angle of the panel you need, and then tighten the adjustment parameters
Temperature/ adjust the brightness. Folding 1 2 3 2
board to avoid excess light, make the light softer, and customize the fill Cooling hole Installation Slot HUE/Saturation/
specification to power the product. Do not use power adapter with Features / Features : RGB, SAT, APP, Joint control, Special light, knobs on both sides of the U-bracket. 1 DC15V power input interface (Only the currently
Time parameter In APP mode, connect to APP and adjust brightness through APP. In the APP mode, connect to the APP and adjust the scene through the APP. Color temperature RGB control Scene light Save light
The product is in
Description of product control keys ---------------------- Page 10 （ Battery Not Included ） adjustable light control interface interface control interface effect interface
Check if the product is “OFF”
light, allowing you to easily and casually shoot the desired results. mode is displayed) (Only the currently adjustable
different output voltage parameters. High color rendering index light beads, Upgrade LED screen Mode selection 2 Power switch the "ON" state, Press the “ON/OFF” button once Desktop Light
light mode is displayed)
because of the APP of the 2
button the display and again. Stand
Function introduction and instruction for use ---------------------- ④ The product can simulate 8 kinds of scene lights: Lightning, Police car,
② The product is not waterproof, please use it in rainproof environment. Power : 40W 3 Mode control button: Change mode control ④ Adjust color temperature (CCT): range 3200K~5600K ⑧ Adjust CH: range 1~12 mobile phone.
Battery tank ② Mode types and functions： lights are not on
Candlelight, TV, Bad light bulb, Party, disco, Paparazzi.
Voltage : AC:100-240V F 4 Change channel button: When is in master/slave mode, press this button In Master mode / Rotate mode, short press the composite knob to switch In Master mode/Slave mode, tap the plus/minus key to set the channel value. Light stand 2 3
------------------------------------------------------------ Page 11,12,13,14 ③ The product is not anti-corrosion, therefore do not let the product touch Mode control
We believe that once using our product correctly, you can make huge progress
MODE

to select the channel. Press the mode button to change the control mode, such as: In APP mode, connect to APP and set the channel value through APP. Normal steps:
any corrosive liquid. Power supply mode : DC input&Battery button the light mode to CCT, and then turn the composite knob button to adjust
Adapter interface Battery OFF Adapter
Rotate, slave, master, APP ① Switch to APP mode after
APP connection and APP control ------------------------ Page 15 when shooting. Before using the product, you are strongly recommended to
Power supply : DC15V/3A
BRG CCT / HUE / SAT / SCE

5 Brightness adjustment button: Adjust the brightness the color temperature. Check whether the device is Carrying Case 1 1 1 1
Power switch Rotate mode: Adjust the parameters of the light through the controller APP can't booting;
read the instructions below carefully. ④ When using the product, make sure the product is put firmly and prevent In APP mode, connect to APP and adjust color temperature through APP. ⑨ APP control: in APP mode and whether
GVM Official Facebook Download APP Battery Capacity : 7.4V-4400mAh*2 ( to be purchased separately) 6 Multifunctional button: Press once to switch light mode. Press for 3 connect / can't ② Turn on bluetooth and GPS on
Use and preservation ----------------------------------------- Page 16 from falling and damage. Brightness control Multifunctional behind the light. "BT_LED" is displayed on the
website seconds to enter/exit the scene mode; Spin the knob to adjust the Switch the photography light to the APP mode, connect the Bluetooth of the control the phone Instructions 1 1 1 1
Product Weight : 1KG button B Slave mode: The channel can only be adjusted through the ▲ and ▼ APP
⑤ If the product will not be used for a long time, please switch off the power parameters of the current light mode. ⑤ Adjust HUE: range 0° ~ 360° camera light through the mobile phone, and then use the APP to control the ③ Open the APP, search and
Simple faults and troubleshooting -------------------- Page 17,18 Product Size ( mm ) : 270*263*40 buttons of the controller behind the light. When the channels of the slave
Web: www.gvmled.com to reduce energy loss. Adapter Interface In Master mode / Rotate mode, short press the composite knob to switch brightness, color temperature, hue, sat, scene, channel, and on/off of the connect to Bluetooth BT_LED
B&H Email: [email protected] C 7 LCD screen: The screen display the current brightness, control mode, and the master are the same, they can be synchronously controlled by
Cooling : Natural heat dissipation camera light. If there is a slave, you can also go through the APP Perform
GVM Email: [email protected]
Packing list ------------------------------------------------------- Page 19 light mode, light parameters, scene number, channel numerical, and the light mode to HUE, and then turn the composite knob button to adjust
GVM-800D-II Commodity origin : China. Huizhou the master.
Amazon Email: [email protected] D A online control.
E battery power of the light. the hue.
Warehouse Add: 4301 N Delaware ave, unit D. PHILADELPHIA, PA19137, USA
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19