EX3600-7

Bucket Capacity: SHOVEL (ISO HEAPED): 22 m3 (28.8 cu. yd)

BACKHOE (ISO HEAPED): 22 m3 (28.8 cu. yd)
Operating Weight: CUMMINS MTU
FT4 SHOVEL: 369 000 kg (813,506 lb.) FT4 SHOVEL: 366 000 kg (806,892 lb.)
FT4 BACKHOE: 370 000 kg (815,710 lb.) FT4 BACKHOE: 367 000 kg (809,097 lb.)
FCO SHOVEL: 365 000 kg (804,687 lb.) FCO SHOVEL: 366 000 kg (806,892 lb.)
FCO BACKHOE: 366 000 kg (806,892 lb.) FCO BACKHOE: 367 000 kg (809,097 lb.)
Rated Power: CUMMINS: 1450 kW (1,944 hp)
MTU: 1450 kW (1,944 hp)
ELECTRIC: 1200 kW (1,609 hp)
MINING EXCAVATORS
 UNCOMPROMISED

PRODUCTIV
Hitachi's EX-7 Series is designed from more than 100 years
of group company expertise, integrating efficiency,
reliability and durability. Available as a backhoe or shovel,
the EX3600-7 reduces fuel consumption by 4 percent.*
Plus, it features enhanced safety and features like an
improved hydraulic system, engine options and simplified
maintenance.

The EX3600-7 provides

EFFICIENT
OPERATION.
2 *Comparison of Cummins engine configuration against the EX3600-6.
 EX3600-7

VITY.
3
EX3600-7

INCREASED EFFICIENCY.
REDUCED
CONSUMPTION.
The EX3600-7 features the latest engine and energy optimizing
technologies to provide a 4 percent reduction in fuel consumption.*
Additionally, this workhorse includes electronically controlled
hydraulic pumps, an optimized cooling package and enhanced
hydraulic circuits for a sustainable solution that doesn't compromise
performance.

This excavator gives you

FUEL-EFFICIENT
PERFORMANCE.

MAIN PUMP HYDRAULIC HYDRAULIC OIL COOLER EFFICIENT ENGINE OPTIONS

ELECTRIC REGULATORS REGENERATION CIRCUIT A larger hydraulic oil cooler Choose from Cummins or MTU
Each individually controlled The flow regeneration valve fitted with variable speed fan reduces U.S. EPA Final Tier 4 (FT4)
hydraulic pump has its own electric to the hydraulic system reduces energy demand and creates a engines, and Cummins or MTU
regulator, enhancing engine pump demand, ultimately reducing more reliable hydraulic system. Fuel-Calibration Optimization
power, lowering fuel consumption, power requirements from the The oil cooler is kept separate (FCO) options for fuel-efficient
and increasing productivity to hydraulic system and engine. The from the radiator to effectively operation.
lower the total cost of operation. result is lower fuel consumption reduce hydraulic oil temperatures,
and improved pump life. increase hydraulic service life
and improve maintainability.

4 *Comparison of Cummins engine configuration against the EX3600-6.

ELECTRIC MOTOR OPTION
The EX3600-7E electric excavator
option with a Hitachi AC electric
motor is available.

5
 ELECTRONIC CYLINDER FRONT ATTACHMENT HOSES
STROKE CONTROL Hitachi’s hose design has been
The new on-board electronic tested on a high cyclic fatigue
controller receives signals from rate to maximize longevity and
angle sensors fitted to the main improve safety. Front attachment
frame, boom and arm to control hoses have been rearranged
the pump flow rate and cylinder from the traditional arch style
speed. Shock at stroke end of to an underslung configuration,
the cylinder cycle is reduced, removing the need for clamping,
improving operator comfort and reducing chafing and increasing
lowering impact on cylinders reliability.
and structures for more reliable
operation.

6
 EX3600-7

AROUND-THE-CLOCK
PRODUCTIVITY.
Equipped with more than 100 years of technological innovation
from Hitachi, Ltd. group companies, our EX-7 Series excavators
are engineered to achieve more for your mine site. The EX3600-7
delivers exceptional around-the-clock performance while
optimizing consumption, taking productivity to a new level.

When you choose the EX3600-7,

NOTHING'S STOPPING YOU.

FRONT ATTACHMENT SHOVEL DESIGN SHOVEL EXCAVATING FORCE

With a front attachment The Loading Shovel attachment Arm crowding force on ground
design optimized for machine is equipped with an auto-leveling 1190 kN/105 000 kgf (231,485 lbf.)
crowd mechanism that controls the
performance, the EX3600-7 can bucket at a constant angle. The Bucket digging force
achieve superior productivity EX3600-7 now has a larger 22 m3
under various digging profiles. (28.8 cu. yd.) bucket, designed 1030 kN/97 000 kgf (213,848 lbf.)
The boom and arm are welded, to enhance loading capability
with a tilt angle that enhances
utilizing a low stress, full-box operational efficiency.
section design to evenly distribute
stress throughout the high tensile
strength steel structure and BACKHOE DESIGN BACKHOE EXCAVATING FORCE
The Backhoe attachment is Arm crowding force*
provide for ease of maintenance. designed using computer aided 951 kN/97 000 kgf (213,848 lb.)
box frame analysis to determine
the optimal structure for integrity Bucket digging force
and longevity. Complete with
floating pin and bush, Hitachi 1050 kN/107 000 kgf
buckets are designed to match (235,895 lbf.)
the geometry of the attachment to
maximize productivity.

*Calculated value at the loading point (Cutting Edge) conforming to ISO. 7

EX3600-7

OPERATOR FRIENDLY.
SAFETY
FOCUSED.
At Hitachi, safety is a top priority. And the design of the EX3600-7
provides for a safety-focused machine. The EX3600-7 includes
spacious walkways, improved handrails, and standard features like
an on-board inclinometer and dual isolator switch.

This excavator provides advanced

SAFETY FEATURES.

EMERGENCY STOP SWITCHES DUAL ISOLATOR SWITCH ON-BOARD INCLINOMETER

Seven emergency stop switches The dual isolator switch can The on-board inclinometer offers two predetermined safety limits to
are easily accessible around the deactivate the engine and battery assist the operator. If the first safety limit is exceeded, the operator
machine to improve safety. The individually. The battery isolator receives a visual alert prompting corrective action. The alert escalates
emergency switch located in isolates the positive and negative to an audible alarm if the second safety limit is breached.
the cab has the added feature battery terminals for safe
of releasing the hydraulic tank inspections. The engine isolator
pressure when activated to reduce deactivates the engine starter
the parasitic pressure in the motor while allowing battery
hydraulic system. power to the electric system.

8
PERIMETER MONITORING EMERGENCY ESCAPE CHUTE ACCESS AND WALKWAYS
CAMERAS An escape chute has been added Anti-slip walkways and specially
Optional perimeter monitoring to the side of the cab for use in designed handrails reduce the risk
cameras offer better visibility of a an emergency. The chute allows of tripping. Wide, low-gradient,
surrounding area, reducing blind evacuees to descend vertically non-slip, hydraulic folding stairs
spots for the operator. Two cam- down from the machine, providing a allow for easy and safe access to
eras are located at both the front safe and fast route of escape when the machine.
and rear of the excavator, and are all other means of exit are blocked.
linked to monitors inside the cab.

9
ROLL SCREENS CLIMATE CONTROLLED OPERATOR SEAT ELECTRONIC JOYSTICKS
Retractable front and side roll AIR CONDITIONING The automatic weight-adjusting Connected to the machine’s
screens protect the operator The pressurized cab’s climate air suspension seat calculates microprocessor, the integrated
from UV glare and reduce heat controlled air conditioning optimal cushioning to match the electronic joysticks enable precise
buildup in the cab, improving the optimizes filtering of interior and operator's weight, enhancing and almost effortless operation.
efficiency of the climate controlled exterior air. Plus, a new flexi-vent comfort and minimizing vibration.
air conditioner for a superior system provides a personalized
operating environment. environment.

10
 EX3600-7

COMFORTABLE CAB.
PRODUCTIVE
OPERATOR.
Hitachi’s EX3600-7 maximizes productivity by giving operators
complete comfort and control in the cab. Features include
ergonomic layout, electronic joysticks, intelligent multi-functional
display, advanced air suspension seating and better climate
control for effortless operation.

This excavator offers

MAXIMUM COMFORT.

OPERATOR CABIN MULTI-FUNCTIONAL DISPLAY

Laminated, tinted windows reduce Fitted with an LED back-light to provide improved clarity with reduced
heat and glare. The Level II Operator glare and reflection, the multi-functional display provides key machine
Protective Guard (OPG) provides information and performance indicators through use of an integrated
secure protection from falling dial switch interface.
objects, ensuring operator safety.

11
EX3600-7

LESS MAINTENANCE.
MORE UPTIME.
Hitachi's EX-7 Series excavators are now easier and safer to
maintain than ever before with an intuitive design. The EX3600‑7
features a layout with open passageways and work platforms to
simplify daily upkeep and major component inspections.

The EX3600-7 provides

SIMPLE SERVICING.

MAINTENANCE ACCESS
AUTO-LUBRICATING SYSTEM GREASE-LESS CENTER JOINT SWING CIRCLE COVER Walkways, platforms and wide
A redesigned auto-lubrication The redesigned center joint is self- A cover has been added to the open service areas provide ease
system comes with a 500 L (132 lubricating utilizing the machine’s outside of the swing bearing of access for daily maintenance
gal.) large capacity grease tank, hydraulic oil, reducing the need to provide protection to the tasks, and to engine, hydraulic
new grease pump, in-line grease for daily maintenance. lubrication piping against damage and electrical components for
filter with breather, grease level from debris. quick and easy inspections.
indicator in cab and provision for
fitting of a second grease pump
in the lubrication tank.

12
CONTAMINATION SENSORS CENTRALIZED
Contamination sensors are located LUBRICATION SYSTEM
on all main hydraulic pumps to The centralized fast-filling system
detect any contaminants that may provides easy access from
cause damage to the hydraulic the ground to refill and evacuate
system. The sensors alert the lubricants, water, grease and
operator and record the fault code fuel. The fast-filling system
in the Data Logging Unit (DLU). can be fitted with an optional
quick coupler.

13
 TRAVEL TRANSMISSION GUARD CENTER TRACK FRAME TRACK SHOES
An optional guard protects the travel Hitachi’s exclusive center track frame The proven Hitachi patented
transmission from rough operating delivers optimal stress dispersion track shoe design helps reduce
surfaces often encountered in through the use of specifically premature wear of the drive-lugs.
backhoe benching operations. designed castings to reduce welds Each shoe is induction hardened
in critical high stress areas. to deliver a more durable solution.

14
 EX3600-7

TOUGHNESS BUILT IN.

DOWNTIME
TOSSED OUT.
The EX3600-7 is built to withstand the harshest mining conditions
while delivering outstanding productivity. Advanced computer
modelling, specialized forgings, and pedestal design track shoes
are just some of the features that make this excavator one of the
most durable machines on the market.

The EX3600-7 is built to

OUTWORK AND OUTLAST.

OIL FILLED ROLLERS & IDLERS

The oil-filled idlers, and upper RIGID BOX DESIGN UPPER ROLLERS CENTER FRAME UNDERGUARD
and lower rollers eliminate the Computer assisted analysis The EX3600-7 undercarriage The optional heavy duty guard
need for daily lubrication, helping is used to determine the most has three double-sided pedestal- protects hoses and accumulators
reduce maintenance costs. effective design for frame designed upper rollers on each located in the track center frame
longevity to withstand the side of the track frame to maintain from rocks and debris ingress,
demands of the mining operation. track shoe clearance and provide providing extra protection and
protection from debris buildup, reliability.
reducing shoe and roller wear.

15
EX3600-7

ON-DEMAND PERFORMANCE.
RELIABLE
SOLUTION.
Hitachi’s EX-7 Series is loaded with intelligent features that minimize
downtime and optimize excavator longevity. The EX3600-7 is
designed to provide a reliable solution every hour of the day.

With the EX3600-7, you get

DEPENDABLE DESIGN.

CAB RISER PRESSURIZER SOLID CONDUIT WIRE HARNESSES OPERATING LIGHTS

A pressurizer system has been The introduction of solid conduit Strategically placed long-life LED
introduced to the cab riser harnesses and junction boxes working lights provide greater
to reduce dust infiltration, prevents dust and moisture longevity and reliability in night
maximizing the service life of ingress, improving longevity. operations.
the electronic components and Electrical harnesses between
devices located within. junction boxes can be replaced
individually, ultimately reducing
maintenance time and cost.

16
JUNCTION BOX CONNECTIONS TRAVEL MOTOR GUARD SWING LUBRICATION
All junction boxes now An optional travel motor guard, PIPING COVER
use removable, major wire now upgraded with a top cover, A new, standard cover protects
connections. If a wire harness covers and helps protect the travel hydraulic piping on the turn base
section is damaged, it can be motors and hydraulic piping from from damage.
replaced without removing the tough terrain.
entire wire harness, reducing
maintenance time and costs.

17
EX3600-7

INTELLIGENT SYSTEMS FOR

RAPID RESPONSE.
Hitachi’s EX-7 Series excavators connect physical and
digital technologies to drive transformation in the
mining industry. Utilizing extensive onboard sensors,
diagnostic tools, real-time data and advanced software,
the EX3600-7 helps optimize your operation.

The excavator controller can be

INTERNET combined with Wenco or another
third party fleet management
system to provide live operational
and performance information,
assisting with fleet management.

CUSTOMER HITACHI CONSTRUCTION INFORMATION CENTER, FLEET MANAGEMENT

MACHINERY GROUP HITACHI CONSTRUCTION SYSTEM
AND DEALERS MACHINERY

Aerial Angle(optional) provides the operator with a real-time
continuous birds-eye view around their excavator. Cameras
strategically mounted on the machine generate a single aerial view of
the EX3600-7 surroundings. Multiple screen display options can be
selected on the cab’s 7-inch Aerial Angle monitor for ease of operation.

18
 SATELLITE / GPRS COMMUNICATION
(OPTIONAL)
Standard machine information is
transmitted daily through either
satellite or GPRS (General Packet
Radio Service) communication,
GLOBAL E-SERVICE
sending data directly to Hitachi’s Global
Global e-Service is a Hitachi web-based
e-Service platform to support the
platform which sends vital machine
mining operation.
information directly to the customer in an
easy-to-understand format. ANTENNA (GPRS)
OR SATELLITE

WIRELESS INTERFACE (OPTIONAL)

Detailed machine information recorded on
the Data Logging Unit (DLU) can be remotely INTERNET
downloaded via the Wireless Interface
Unit (WIU), providing vital operational &
performance data.

ON-SITE STAFF
Operation data is
collected and uploaded
by on-site staff.

Image used for display purposes only.

19
SPECIFICATIONS
Rear-end swing radius 6980 mm
EX3600-7 9420 mm (30 ft. 11 in.) (22 ft. 11 in.)
(Rear end length 6850 mm)
(22 ft. 6 in.)

7830 mm (25 ft. 8 in.)

2440 mm
(8 ft.)
905 mm (3 ft.)
1270 mm 6660 mm (21 ft. 10 in.)
(4 ft. 2 in.)
6770 mm (22 ft. 3 in.) 8700 mm (28 ft. 7 in.)

ILLUSTRATIONS SHOW DIESEL ENGINE MACHINE

Diesel Engine EX3600-7
Manufacturer and Model Cummins QSKTA60-CE Cummins QSKTA60-CE MTU 12V 4000 C35 MTU 12V 4000 C33
Type 4 cycle 4 cycle 4 cycle 4 cycle
Aspiration Water-cooled, 16-cylinder, Water-cooled, 16-cylinder, Water-cooled, 12-cylinder, Water-cooled, 12-cylinder,
turbocharged and aftercooled, turbocharged and aftercooled, turbocharged and aftercooled, turbocharged and aftercooled,
direct-injection chamber-type direct-injection chamber-type direct-injection chamber-type diesel direct-injection chamber-type
diesel engine diesel engine engine, Miller cycle, Cooled EGR diesel engine
Emission certification U.S. EPA Tier 4 Final Fuel consumption optimized U.S. EPA Tier 4 Final Fuel consumption optimized
Rated power
Gross (ISO 14396) 1450 kW (1,944 hp) 1450 kW (1,944 hp) 1500 kW (1,944 hp) 1450 kW (1,944 hp)
@ 1800 min-1 (rpm) @ 1800 min-1 (rpm) @ 1800 min-1 (rpm) @ 1800 min-1 (rpm)
Maximum torque 8364 Nm (853 kgf-m) 8364 Nm (853 kgf-m) 9588 Nm (978 kgf-m) 9231 Nm (941 kgf-m)
@ 1500 min-1 (rpm) @ 1500 min-1 (rpm) @ 1500 min-1 (rpm) @ 1500 min-1 (rpm)
Piston displacement 60 L (3,661 cu. in.) 60 L (3,661 cu. in.) 57.2 L (3,491 cu. in.) 57.2 L (3,491 cu. in.)
Bore and stroke 159 mm x 190 mm (6.3 in. x 7.5 in.) 159 mm x 190 mm (6.3 in. x 7.5 in.) 170 mm x 210 mm (6.7 in. x 8.3) 170 mm x 210 mm (6.7 in. x 8.3)
Starting system 24 V electric motor 24 V electric motor 24 V electric motor 24 V electric motor
Batteries 4 x 12 V, 4 x 185 AH 4 x 12 V, 4 x 185 AH 4 x 12 V, 4 x 185 AH 4 x 12 V, 4 x 185 AH
Hydraulic System
Hitachi’s ETS (Electronic Total control System) can achieve maximum job efficiency by reducing fuel consumption and noise levels, while maximizing productivity through the
optimization of engine-pump functions with excellent controllability increasing operator comfort.
Computer-Aided Engine-Pump Control System (E-P Control)
Main pumps regulated by electric engine speed sensing control system.
Optimum Hydraulic System (OHS)
Four tandem-axial piston pump groups (eight pumps in total), supply a four-valve hydraulic system enabling both independent and combinedoperations of all functions.
Additional Features
Fuel-saving Pump System (FPS) minimizes energy loss with superior performance in fine control
Auto-idle system saves fuel and reduces noise
Hydraulic drive cooling-fan system for oil cooler
Hydraulic drive cooling-fan system for radiator
Forced-lubrication and forced-cooling pump drive system
Regeneration circuit for boom down
Main Pumps
8 variable-displacement, axial piston pumps for front attachment, travel and swing
Maximum oil flow 8 x 500 L/min (8 x 132 gal./min.)
Pilot Pump
Gear pump
Maximum oil flow 110 L/min (29 gal./min.)
Relief Valve Settings
Implement circuit 29.4 MPa (300 kgf/cm2) (4,264 psi)
Travel circuit 29.4 MPa (300 kgf/cm2) (4,264 psi)
Swing circuit 29.4 MPa (300 kgf/cm2) (4,264 psi)
Pilot circuit 4.0 MPa (41 kgf/cm2) (580 psi)
Hydraulic Cylinders
High-strength piston rods and tubes adopted. Cylinder cushion mechanisms are provided for boom, arm, bucket and dump cylinders.
Bucket cylinders of loading shovel are provided with protector.

20
Cylinder Dimensions (Backhoe)
Quantity Bore Rod Diameter
Boom 2 360 mm (14.2 in.) 260 mm (10.2 in.)
Arm 2 300 mm (11.8 in.) 220 mm (8.7 in.)
Bucket 2 250 mm (9.8 in.) 180 mm (7.1 in.)
Cylinder Dimensions (Loading Shovel)
Quantity Bore Rod Diameter
Boom 2 360 mm (14.2 in.) 260 mm (10.2 in.)
Arm 1 300 mm (11.8 in.) 220 mm (8.7 in.)
Bucket 2 280 mm (11 in.) 200 mm (7.9 in.)
Dump 2 225 mm (8.9 in.) 130 mm (5.1 in.)
Level 1 360 mm (14.2 in.) 260 mm (10.2 in.)
Hydraulic Filters
All hydraulic circuits have high-quality hydraulic filters for protection against oil contamination and longer life of hydraulic components. Filters are centralized for convenient maintenance.
Quantity
Full-flow filter 5 10 µm
High-pressure strainer (in main and swing pump line) 8 120 µm
Drain filter (for all plunger-type pumps and motors) 1 10 µm
Bypass filter (in oil cooler by-pass line) 1 5 µm
Pilot filter 1 10 µm
Controls
Two Implement Levers
E lectric joystick control levers. Right lever is for boom and bucket
control, left lever for swing and arm control.
Two pedals provided for opening/closing the bottom dump bucket.
Two Travel Levers with Pedals 16
4 16
5
R emote-controlled hydraulic servo system. Independent drive at each
16
10 16
11
track allows counter rotation of tracks. 16
17
1 Left Console
2 Left Control Lever/Horn Switch
3 Left Travel Pedal
4 Left Travel Lever
5 Right Travel Lever 16
12
6 Right Travel Pedal 16
3 16
6
7 Right Control Lever/Horn Switch 16
14
16
2 16
7
8 Right Console 16
15
9 Operator’s Seat
10 Bucket Close Pedal (for loading shovel)
11 Bucket Open Pedal (for loading shovel)
12 Pilot Control Shut-Off Lever
13 Rear Console 16
8
14 Emergency Engine Stop Switch 16
1 16
15 Engine Speed Control Dial
16 Key Switch
17 Monitor Display 16
9

16
13

DIESEL ENGINE CONTROLS

21
SPECIFICATIONS

EX3600-7

Upperstructure EX3600-7
Revolving Frame
D
 eep, full-reinforced box section. Heavy-gauge steel plates
used for ruggedness.
FOR DIESEL ENGINE MACHINE
Deck Machinery
M
 aintenance accessibility is the major feature in the layout
of deck machinery. Sidewalks provide easy access to engine,
hydraulic and electrical components. ISO-met stairs and
handrails. Sidewalks and stairs are provided with skid-resistant
plates.
1 Diesel Engine
2 Engine Radiator x2
3 LTA Radiator x2
4 Radiator Fan Motor x4
5 Reserve Tank(Coolant)
6 Air Filter(Outer / Inner) x4
7 Muffler x2
8 Pump Drive Unit
9 Hydraulic Pump x10
10 High Pressure Strainer x8
11 Control Valve x4
12 Hydraulic Oil Cooler x3
13 Hydraulic Oil Cooler Fan Motor x2
14 Hydraulic Tank
15 Fuel Tank
16 Fuel Filter
17 DEF Tank (Only for Cummins Tier4F)
DECK MACHINERY
18 Pump Transmission Oil Cooler
FOR DIESEL ENGINE MACHINE
19 Fuel Cooler
20 Pump Transmission Oil & Fuel Cooler Fan Motor
21 Engine Room Ventilation Fan Motor
22 Center Joint
23 Swing Device x4
24 Lubricator
25 Cab
26 Battery x4
27 Isolation Switch Box
28 Folding Stairs
29 Ladder
30 Engine-Pump Bulkhead
31 Engine-Radiator Bulkhead
32 Emergency Escape Chute

22
Swing Device
Four high-torque, axial-piston motors with two-stage planetary gear bathed in oil. Swing circle with dirt seals is a heavy-duty, triple-row cylindrical roller bearing. Induction-hardened
internal swing circle gear and pinion immersed in lubricant. Parking brake of springset/hydraulic-released disc type. This parking brake is manually releasable.
Swing speed 3.2 min-1 (rpm)
Operator’s Cab
The sturdy cab, with the top guard conforming to OPG Level ll (ISO), helps protect the operator from falling objects. 1800-mm (5 ft. 11 in.) width, 2150-mm (7 ft. 1 in.) height, roomy
7.5-m3 (9.8 cu. yd.) cab with tinted-glass windows features all-around visibility. Air-suspension type, fully adjustable reclining seat with armrests; movable with or without front and
swing control levers by slide. Instruments and control panel are within easy reach of the operator. Three air conditioner system.
Noise level 72 dB(A) in the cab at maximum engine speed under no-load condition
Eye-level height 6760 mm (22 ft. 2 in.)
Undercarriage
Tracks
Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame and X-form center frame assures durability. Heavy-duty track frame of all-welded, stress-relieved structure.
Top-grade materials used for toughness. Lifetime-lubricated induction-hardened track rollers, idlers and drive tumblers with floating seals. Specially heat-treated connection pins.
Hydraulic track adjuster provided with N2 gas accumulator and relief valve. Track adjuster provided with protection device against abnormal tension. Travel motion alarm device.
Shovel-Type Undercarriage
Triple grouser track shoes of induction-hardened cast steel
Shoe width 1270 mm (50 in.)
Number of Rollers and Shoes (each side)
Upper rollers 3
Lower rollers 8
Track shoes 38
Travel Device
E ach track driven by high-torque, axial piston motors, allowing counter rotation of tracks. Two-stage planetary gear plus spur gears reduction device. Dual-support-type traction
device. Parking brake of springset/hydraulic-released disc type. This parking brake is manually releasable.
Travel speeds Low: 0-1.7 km/h (0-1.1 mph)
High: 0-2.2 km/h (0-1.4 mph)
Maximum traction force 1760 kN/179 500 kgf (395,730 lbf.)
Gradeability 58% (30°) maximum
Weights and Ground Pressure
Loading Shovel
Equipped with 22-m3 (28.8 cu. yd.) (ISO heaped) bottom-dump bucket. Ground pressures are based on ISO 16754.
Cummins Engine
Shoe Type Shoe Width Emmission Certification Operating Weight Ground Pressure
FCO 365 000 kg (804,687 lb.) 191 kPa (1.95 kgf/cm2) (27.7 psi)
Triple Grousers 1270 mm (50 in.)
T4F 369 000 kg (813,506 lb.) 193 kPa (1.97 kgf/cm2) (28 psi)
MTU Engine
Shoe Type Shoe Width Operating Weight Ground Pressure
FCO 366 000 kg (806,892 lb.) 192 kPa (1.96 kgf/cm2) (27.8 psi)
Triple Grousers 1270 mm (50 in.)
T4F 366 000 kg (806,892 lb.) 192 kPa (1.96 kgf/cm2) (27.8 psi)
Backhoe
Equipped with 9.6-m (31 ft. 6 in.) BE boom, 4.5-m (14 ft. 9 in.) BE arm,, and 22-m3 (28.8 cu. yd.)(ISO heaped) bucket. Ground pressures are based on ISO 16754.
Cummins Engine
Shoe Type Shoe Width Emmission Certification Operating Weight Ground Pressure
FCO 366 000 kg (806,892 lb.) 192 kPa (1.96 kgf/cm2) (27.8 psi)
Triple Grousers 1270 mm (50 in.)
T4F 370 000 kg (815,710 lb.) 194 kPa (1.98 kgf/cm2) (28.1 psi)
MTU Engine
Shoe Type Shoe Width Emmission Certification Operating Weight Ground Pressure
FCO 367 000 kg (809,097 lb.) 192 kPa (1.96 kgf/cm2) (27.8 psi)
Triple Grousers 1270 mm (50 in.)
T4F 367 000 kg (809,097 lb.) 192 kPa (1.96 kgf/cm2) (27.8 psi)
Service Refill Capabilities Cummins Engine MTU Engine
Fuel tank 7450 L (1,968 gal.) 7450 L (1,968 gal.)
Engine coolant (T4F/FCO) 611 L (161 gal.)/ 593 L (156 gal.) 708 L (187 gal.)/ 678 L (179 gal.)
Engine oil pan 360 L (95 gal.) 290 L (76 gal.)
Pump transmission device 62 L (16 gal.) 62 L (16 gal.)
Swing device 4 x 75 L (4 x 20 gal.) 4 x 75 L (4 x 20 gal.)
Travel device 2 x 220 L (2 x 58 gal.) 2 x 220 L (2 x 58 gal.)
Hydraulic system 4000 L (1,057 gal.) 4000 L (1,057 gal.)
Hydraulic oil tank 1900 L (502 gal.) 1900 L (502 gal.)
Grease tank 500 L (132 gal.) 500 L (132 gal.)
DEF tank (only Tier 4 final specification) 475 L (125 gal.)

23
SPECIFICATIONS

EX3600-7
Loading Shovel Attachment EX3600-7

Meter
18

16

14

12
H
10 G
E
8

6 E1
EH3500
4

0
Ground Line
2 A
F
4
C B
6
D
8
20 18 16 14 12 10 8 6 4 2 0 Meter

Working Ranges
Boom and arm are of all-welded, low-stress, high-tensile strength steel full-box section design. Efficient, automatic level crowding achieved by one-lever control as the parallel link
mechanism keeps the bucket digging angle constant, and level cylinder circuit maintains the bucket height constant (Auto-Leveling Crowd Mechanism). Auto-lubrication system for all
pins is standard.
Bucket Capacity (ISO 7456 heaped 2:1) 22 m3 (28.8 cu. yd.)
A Min digging distance 6180 mm (20 ft. 3 in.)
B Min level crowding distance 9440 mm (31 ft.)
C Level crowding distance 5060 mm (16 ft. 7 in.)
D Max digging reach 15 660 mm (51 ft. 5 in.)
E Max cutting height 16 750 mm (54 ft. 11 in.)
E1 Max dumping height 10 990 mm (36 ft. 1 in.)
F Max digging depth 4350 mm (14 ft. 3 in.)
G Working radius at max dumping height 8640 mm (28 ft. 4 in.)
H Max bucket opening width 1950 mm (6 ft. 5 in.)
Bucket digging force 1030 kN / 97 000 kgf (213,848 lbf.)
Arm crowding force 1190 kN / 155 000 kgf (341,717 lbf.)
Bucket
Boom and arm are of all-welded, low-stress, high-tensile strength steel full-box section design. Bottom dump type general purpose bucket.
Capacity (ISO heaped 2:1) Width Number of Teeth Weight Type Materials density
22-m3 (28.8 cu. yd.) 4200 mm (13 ft. 9 in.) 5 29 300 kg (64,595 lb.) Bottom-dump-type 1800 kg/m3
general purpose (3,034 lb./cu. yd.) or less
Note: These buckets do not include any type of wear protection for sides, bottom, and inside the bucket. Please consult your local Hitachi dealer for a proper wear protection system for your application.
Please do not use the buckets without proper wear protection for your application.

Bucket Passes to Dump Trucks

Truck Nominal Payload Bucket Capacity Passes to Fill
1 2 3 4 5 6 7 8
181 tonnes 22-m (28.8 cu. yd.)
3
Shovel EH3500AC-3
(200 tons) Bucket

221 tonnes 22-m3 (28.8 cu. yd.)

Shovel EH4000AC-3
(243.6 tons) Bucket

24
Backhoe Attachment EX3600-7

Meter
18 E

16
14
12
10
8
C
6 D

4
D1
2
0
EH3500 Ground Line
2 F

4 B1
B
6 2.5m
8
G
10 A1
A
12
22 20 18 16 14 12 10 8 6 4 2 0 Meter

Working Ranges
Boom and arm are of all-welded, low-stress, full-box section design. Bucket of all-welded, high-strength steel structure. Bucket/arm joint pins are floating type. Replaceable thrust plates
are provided with bucket/arm joint part. Autolubrication system for all pins is standard.
BE-boom length 9.6-m (31 ft. 6 in.)
BE-arm length 4.5-m (14 ft. 9 in.)
Bucket Capacity (ISO 7451 heaped 1:1) 22 m3 (28.8 cu. yd.)
A Max digging reach 18 240 mm (59 ft. 10 in.)
A1 Max digging reach (on ground) 17 660 mm (57 ft. 11 in.)
B Max digging depth 8630 mm (28 ft. 4 in.)
B1 Max digging depth (2.5 m level) 8540 mm (28 ft.)
C Max cutting height 17 710 mm (58 ft. 1 in.)
D Max dumping height 11 540 mm (37 ft. 10 in.)
D1 Min dumping height 4960 mm (16 ft. 3 in.)
E Min swing radius 8540 mm (28 ft.)
F Max vertical wall 4120 mm (13 ft. 6 in.)
G Min level crowding distance 6710 mm (22 ft.)
Bucket digging force* ISO 1050 kN / 107 000 kgf (235,895 lbf.)
Arm crowding force* ISO 951 kN / 97 000 kgf (213,848 lbf.)
*This is the calculated value at the loading point (Cutting Edge) conforming to ISO.
Bucket
Boom and arm are of all-welded, low-stress, full-box section design. Bucket of all-welded, high-strength steel structure. Bucket/arm and arm/boom joint pins are floating type.
Replaceable thrust plates are provided with bucket/arm joint part. Auto-lubrication system for all pins is standard.
Capacity (SAE heaped 1:1) Width (without side cutters) Number of Teeth Weight Type Materials density
22-m3 (28.8 cu. yd.) 3790 mm (12 ft. 5 in.) 6 18 400 kg (40,565 lb.) General purpose 1800 kg/m3 (3,034 lb./cu. yd.) or less
Note: These buckets do not include any type of wear protection for sides, bottom, and inside the bucket. Please consult your local Hitachi dealer for a proper wear protection system for your application.
Please do not use the buckets without proper wear protection for your application.

Bucket Passes to Dump Trucks

Truck Nominal Payload Bucket Capacity Passes to Fill
1 2 3 4 5 6 7 8
181 tonnes 22-m3 (28.8 cu. yd.)
Backhoe EH3500AC-3
(200 tons) Bucket

221 tonnes 22-m3 (28.8 cu. yd.)

Backhoe EH4000AC-3
(243.6 tons) Bucket

25
TRANSPORTATION

EX3600-7
Upperstructure EX3600-7

CAB ASSEMBLY CAB BED ASSEMBLY (L) STEP STEP

Weight : 1800 kg (3,968 lb.) Weight : 10 300 kg (22,708 lb.) Weight : 74 kg (163 lb.) Weight : 65 kg (143 lb.)
2828 mm (9 ft. 3 in.)

(4 ft. 3 in.)
1220 mm

1286 mm
3179 mm (10 ft. 5 in.)

(4 ft.)
2700 mm (8 ft. 10 in.)

895 mm 1836 mm
(35 in.) (6 ft.)

5890 mm (19 ft. 4 in.)

Width : 1876 mm (6 ft. 2 in.) Width : 2777 mm (9 ft. 1 in.) Width : 620 mm (24 in.) Width : 620 mm (24 in.)

STEP STEP STEP STEP STEP

Weight : 62 kg (137 lb.) Weight : 49 kg (108 lb.) Weight : 131 kg (289 lb.) Weight : 203 kg (448 lb.) Weight : 177 kg (190 lb.)

1870 mm
(6 ft. 2 in.)

(4 ft. 3 in.)
(4 ft. 3 in.)

(4 ft. 3 in.)

1293 mm
1286 mm

1286 mm

(5 ft. 1 in.)
1555 mm

2923 mm (9 ft. 7 in.)

1526 mm 1370 mm 2208 mm
(5 ft.) (4 ft. 6 in.) (7 ft. 3 in.)
1553 mm
(5 ft. 1 in.)

Width : 421 mm (17 in.) Width : 407 mm (16 in.) Width : 721 mm (28 in.) Width : 1328 mm (4 ft. 4 in.) Width : 656 mm (26 in.)

ESCAPE DEVICE STAY FENDER FENDER

Weight : 192 kg (423 lb.) Weight : 21 kg x 2 (46 lb. x 2) Weight : 428 kg (944 lb.) Weight : 303 kg (668 lb.)

1005 mm 405 mm (16 in.)

(3 ft. 4 in.)

2173 mm (7 ft. 2 in.)

1817 mm (6 ft.)
1821 mm (6 ft.)
1535 mm (5 ft.)

2806 mm (9 ft. 2 in.)

1689 mm
(5 ft. 6 in.)
Width : 95 mm (4 in.) Width : 1350 mm (4 ft. 5 in.) Width : 1540 mm (5 ft. 1 in.)

HANDRAIL HANDRAIL STEP STOPPER

Weight : 32 kg (71 lb.) Weight : 35 kg (77 lb.) Weight : 42 kg (93 lb.) Weight : 14 kg (31 lb.)
1288 mm (4 ft. 3 in.)

1288 mm (4 ft. 3 in.)

913 mm (3 ft.)
(15 in.)
391 mm

274 mm (11 in.)

980 mm
(3 ft. 3 in.)

1963 mm (6 ft. 5 in.) 2615 mm (8 ft. 7 in.)

Width : 281 mm (11 in.) Width : 281 mm (11 in.) Width : 575 mm (23 in.) Width : 19 mm (1 in.)

26
 Upperstructure (continued) EX3600-7

COVER COVER BRACKET ASSEMBLY HANDRAIL BRACKET

Weight : 4 kg (9 lb.) Weight : 4 kg (9 lb.) Weight : 6 kg (13 lb.) Weight : 5 kg (11 lb.) Weight : 14 kg (31 lb.)

484 mm (19 in.) 606 mm (24 in.)

(23 in.)
577 mm
140 mm (6 in.)
140 mm (6 in.)

448 mm (18 in.)

397 mm (16 in.)

287 mm 401 mm
287 mm (11 in.) (16 in.)
(11 in.)

Width : 158 mm (6 in.) Width : 158 mm (6 in.) Width : 122 mm (5 in.) Width : 260 mm (10 in.) Width : 216 mm (9 in.)

BRACKET BRACKET COVER BRACKET ASSEMBLY

Weight : 5 kg x 4 (11 lb. x 4) Weight : 16 kg x 4 (35 lb. x 4) Weight : 2 kg x 6 (4 lb. x 6) Weight : 1 kg x 4 (2 lb. x 4)

186 mm (7 in.) 186 mm (7186

in.)mm (7300
in.)mm (12 in.) 300
300 mm (12 in.)mm (12340
in.)mm (13 in.) 340 mm (13
340in.)mm (13 in.)

(3 in.)
82 mm
460 mm (18 in.)

460 mm (18 in.)

460 mm (18 in.)

410 mm (16 in.)

453 mm

453 mm

453 mm
(18 in.)

(18 in.)

(18 in.)
453 mm

453 mm

453 mm
(18 in.)

(18 in.)

(18 in.)

Width : 107 mm (4 in.) Width : 150 mm (6 in.) Width : 8 mm (0.3 in.) Width : 65 mm (3 in.)

COVER ASSEMBLY COVER COVER (WATER TANK)

Weight : 9 kg (20 lb.) Weight : 12 kg x 2 (27 lb. x 2) Weight : 2 kg (4 lb.)

340 mm
340(13
mmin.)
(13 in.)
985 mm
985(3
mmft.(3
3 in.)
ft. 3 in.)
460 mm (18 in.)
460 mm (18 in.)
162 mm
162 mm
(6 in.)
400 mm(6 in.)
(16 in.)
(16 in.)
400 mm

1835 1835
mm (6mmft.)(6 ft.)

Width : 102 mm (4 in.) Width : 30 mm (1 in.) Width : 8 mm (0.3 in.)

MAIN FRAME ASSEMBLY BED ASSEMBLY

Weight : 41 900 kg (92,374 lb.) Weight : 12 400 kg (27,337 lb.)
3187 mm (10 ft. 5 in.)
3346 mm (11 ft.)

8935 mm (29 ft. 4 in.)

5122 mm (16 ft. 10 in.)

Width : 3540 mm (11 ft. 7 in.) Width : 2222 mm (7 ft. 3 in.)

27
TRANSPORTATION

EX3600-7
Upperstructure EX3600-7

GREASE TANK ASSEMBLY FENDER FENDER FENDER FENDER

Weight : 401 kg (884 lb.) Weight : 246 kg (542 lb.) Weight : 210 kg (463 lb.) Weight : 174 kg (384 lb.) Weight : 238 kg (525 lb.)

2049 mm (6 ft. 9 in.)

2435 mm (8 ft.) 1692 mm 2030 mm (6 ft. 8 in.)
(5 ft. 7 in.)
1872 mm (6 ft. 2 in.)

2152 mm (7 ft. 1 in.)

(5 ft. 9 in.)
(5 ft. 8 in.)
(5 ft. 8 in.)

1757 mm
1732 mm
1732 mm
1385 mm (4 ft. 7 in.)

Width : 877 mm (35 in.) Width : 760 mm (30 in.) Width : 685 mm (27 in.) Width : 702 mm (28 in.) Width : 864 mm (34 in.)

HANDRAIL HANDRAIL HANDRAIL HANDRAIL

Weight : 44 kg (97 lb.) Weight : 20 kg (44 lb.) Weight : 17 kg (38 lb.) Weight : 23 kg (51 lb.)

2992 mm (9 ft. 10 in.) 1745 mm (5 ft. 9 in.) 955 mm 866 mm

(3 ft. 2 in.) (2 ft. 10 in.)
1032 mm (3 ft. 5 in.)

(3 ft. 7 in.)
1082 mm
(3 ft. 7 in.)
(3 ft. 4 in.)

1082 mm
1006 mm

Width : 292 mm (12 in.) Width : 100 mm (4 in.) Width : 266 mm (10 in.) Width : 801 mm (2 ft. 8 in.)

STEP HANDRAIL HANDRAIL STEP ASSEMBLY

Weight : 39 kg (86 lb.) Weight : 27 kg (60 lb.) Weight : 25 kg (55 lb.) Weight : 33 kg (73 lb.)
1077 mm (3 ft. 9 in.)

1671 mm (5 ft. 5 in.)

(2 ft. 9 in.)
533 mm
(1 ft. 5 in.)
368 mm

850 mm
(2 ft. 9 in.) 406 mm 558 mm
(2 ft. 9 in.) (2 ft. 9 in.)
1732 mm (5 ft. 7 in.)

1717 mm (5 ft. 7 in.)

Width : 400 Width : 274 Width : 261

STEP ASSEMBLY ENGINE UNIT DOOR

Weight : 42 kg (93 lb.) Weight : 27 400 kg (60,407 lb.) Weight : 30 kg (66 lb.)

6848 mm (22 ft. 6 in.)

645 mm
(25 in.)
3747 mm (12 ft. 4 in.)
628 mm
(25 in.)

1874 mm (6 ft. 2 in.)

1063 mm
(3 ft. 6 in.) 406 mm
(16 in.)

Width : 2744 mm (9 ft.) Width : 74 mm (3 in.)

28
Upperstructure (continued) EX3600-7

INTAKE/EXHAUST UNIT HANDRAIL HANDRAIL HANDRAIL

Weight : 1810 kg (3,990 lb.) Weight : 21 kg (46 lb.) Weight : 26 kg (57 lb.) Weight : 13 kg (29 lb.)
3810 mm (12 ft. 6 in.)

1850 mm (6 ft. 1 in.)

2193 mm (7 ft. 2 in.)

(3 ft. 9 in.)
(3 ft. 9 in.)

1142 mm
1142 mm
1198 mm
(3 ft. 11 in.) 265 mm 336 mm 503 mm
(10 in.) (13 in.) (20 in.)
210 mm 542 mm
55 mm
(2 in.)

(8 in.) (21 in.)

Width : 2538 mm (8 ft. 4 in.)

HANDRAIL HANDRAIL HANDRAIL HANDRAIL

Weight : 16 kg (35 lb.) Weight : 17 kg (38 lb.) Weight : 30 kg (66 lb.) Weight : 34 kg (75 lb.)
1530 mm (5 ft.)

(3 ft. 4 in.)

(3 ft. 4 in.)
(3 ft. 4 in.)

1007 mm

1007 mm
1007 mm

931 mm 2643 mm (8 ft. 8 in.) 2500 mm (8 ft. 2 in.)

975 mm 265 mm (3 ft. 1 in.)
(3 ft. 2 in.) (10 in.)

Width : 34 mm (1 in.) Width : 97 mm (4 in.) Width : 50 mm (2 in.)

FENDER FENDER HANDRAIL COVER

Weight : 70 kg (154 lb.) Weight : 102 kg (125 lb.) Weight : 173 kg (381 lb.) Weight : 10 kg (22 lb.)

529 mm
(4 ft. 1 in.)
(4 ft. 11 in.)

(4 ft. 1 in.)

(21 in.)
1233 mm
1233 mm
1491 mm

3113 mm (10 ft. 3 in.) 620 mm

1026 mm 892 mm 2033 mm (6 ft. 8 in.) (24 in.)
(3 ft. 4 in.) (3 ft.) 789 mm
651 mm
(26 in.) (31 in.)

Width : 80 mm (3 in.)

FENDER SUPPORT STEP STEP

Weight : 44 kg (97 lb.) Weight : 100 kg (221 lb.) Weight : 194 kg (428 lb.) Weight : 185 kg (408 lb.)
(26 in.)
666 mm
(5 ft. 3 in.)
1598 mm
(34 in.)
876 mm

1604 mm (5 ft. 3 in.)

305 mm
(12 in.)

994 mm 1227 mm (4 ft.)

(3 ft. 3 in.) 685 mm
(27 in.) 2486 mm (8 ft. 2 in.)
787 mm 2464 mm (8 ft. 1 in.)
(31 in.)

Width : 637 mm (25 in.)

29
SPECIFICATIONS

EX3600-7
Upperstructure EX3600-7

SUCTION MANIFOLD UREA TANK

Weight : 422 kg (930 lb.) Weight : 484 kg (1,067 lb.)

1587 mm (5 ft. 2 in.) 758 mm (30 in.)

1087 mm (3 ft. 7 in.)

1025 mm (3 ft. 4 in.)

1333 mm (4 ft. 4 in.) 1331 mm (4 ft. 4 in.)

STEP ASSEMBLY BOX ASSEMBLY HANDRAIL

Weight : 773 kg (1,704 lb.) Weight : 837 kg (1,845 lb.) Weight : 24 kg (53 lb.)

90 mm
(4 in.)
1255 mm 1242 mm
(4 ft. 1 in.) (4 ft. 1 in.)
2130 mm (7 ft.)

(4 ft. 2 in.)
(5 ft. 3 in.)

1268 mm
1600 mm

3150 mm (10 ft. 4 in.) 1100 mm 1573 mm

(3 ft. 7 in.) (5 ft. 2 in.)

WATER TANK STEP UREA PUMP

Weight : 299 kg (659 lb.) Weight : 15 kg (33 lb.) Weight : 34 kg (75 lb.)
422 mm
(17 in.)
470 mm
(19 in.)
(34 in.)
870 mm

1083 mm (3 ft. 7 in.)

810 mm 97 mm
(32 in.) (4 in.)
949 mm 1060 mm
(3 ft. 1 in.) (3 ft. 6 in.)

Width : 402 mm (16 in.)

BOLT ASSEMBLY STOPPER STOPPER

Weight : 31 kg x 8 (68 lb. x 8) Weight : 5 kg x 2 (11 lb. x 2) Weight : 9 kg x 2 (20 lb. x 2)

290 mm 363 mm
1394 mm (4 ft. 7 in.) (11 in.) (14 in.)
98 mm
(4 in.)

130 mm

130 mm
(5 in.)

(5 in.)

Width : 100 mm (4 in.) Width : 32 mm (1 in.) Width : 32 mm (1 in.)

30
Upperstructure (continued) EX3600-7

COUNTERWEIGHT
Weight : 39 800 kg (87,744 lb.)

1650 mm (5 ft. 5 in.)

8150 mm (26 ft. 9 in.)

1592 mm (5 ft. 3 in.)

HANDRAIL HANDRAIL HANDRAIL

Weight : 21 kg (46 lb.) Weight : 15 kg (33 lb.) Weight : 23 kg (51 lb.)

1795 mm (5 ft. 11 in.) 1309 mm (4 ft. 4 in.)

1904 mm (6 ft. 3 in.)
(3 ft. 4 in.)
(3 ft. 4 in.)

580 mm
1013 mm

(23 in.)
1007 mm

Width : 1330 mm (4 ft. 4 in.) Width : 333 mm (13 in.) Width : 64 mm (3 in.)

HANDRAIL HANDRAIL
Weight : 15 kg (33 lb.) Weight : 21 kg (46 lb.)

1309 mm (4 ft. 4 in.) 1795 mm (5 ft. 11 in.)

1013 mm (3 ft. 4 in.)

(3 ft. 4 in.)
1007 mm

Width : 333 mm (13 in.) Width : 1330 mm (4 ft. 4 in.)

31
TRANSPORTATION

EX3600-7
Upperstructure EX3600-7

TRACK FRAME SIDE FRAME

Weight : 32 300 kg (71,209 lb.) Weight : 28 600 kg x 2 (63,052 lb. x 2)

5526 mm (18 ft. 1 in.)

1836 mm (6 ft.)
8186 mm (26 ft. 10 in.)

3992 mm (13 ft. 1 in.)

Width : 1780 mm (5 ft. 10 in.) Width : 2315 mm (7 ft. 7 in.)

COVER COVER COVER

Weight : 29 kg (64 lb.) Weight : 29 kg (64 lb.) Weight : 12 kg x 2 (26 lb. x 2)

466 mm 466 mm 166 mm

(18 in.) (18 in.) (7 in.)

450 mm (18 in.)

400 mm
(16 in.)

400 mm
(16 in.)

Width : 205 mm (8 in.) Width : 205 mm (8 in.) Width : 189 mm (7 in.)

LINK ASSEMBLY LINK ASSEMBLY

Weight : 5100 kg (11,244 lb.) Weight : 4600 kg (10,141 lb.)
330 mm
(13 in.)

330 mm
(13 in.)

5136 mm (16 ft. 10 in.) 4639 mm (15 ft. 3 in.)

Width : 1270 mm (4 ft. 2 in.) Width : 1270 mm (4 ft. 2 in.)

32
 Upperstructure (continued) EX3600-7

BOOM CYLINDERS BOOM

Weight : 4500 kg x 2 (9,921 lb. x 2) Weight : 27 040 kg (59,613 lb.)

7940 mm (26 ft. 1 in.)

(28 in.)
701 mm

5255 mm (17 ft. 3 in.)

2632 mm (8 ft. 8 in.)

Width : 560 mm (22 in.)

ARM CYLINDER Width : 2570 mm (8 ft. 5 in.)

Weight : 2720 kg (5,997 lb.)

4195 mm (13 ft. 9 in.)

ARM
650 mm
(26 in.)

Weight : 13,340 kg (29,410 lb.)

Width : 592 mm (23 in.) 5110 mm (16 ft. 9 in.)

5110 mm (16 ft. 9 in.)

BUCKET CYLINDERS
Weight : 2 420 kg x 2

4290 mm (14 ft. 1 in.)

483 mm
(19 in.)

Width : 2895 mm (9 ft. 6 in.)

Width : 873 mm (34 in.)

REAR BUCKET FRONT BUCKET TOOTH

Weight : 14 600 kg (32,188 lb.) Weight : 14 700 kg (32,408 lb.) Weight : 96 kg x 5 (212 lb. x 5)
2955 mm (9 ft. 8 in.)
(6 ft. 1 in.)
1859 mm

292 mm
(11 in.)

645 mm
3500 mm (11 ft. 6 in.) 3320 mm (10 ft. 11 in.) (25 in.)

Width : 4162 mm (13 ft. 8 in.) Width : 4278 mm (14 ft.) Width : 321 mm (13 in.)

33
SPECIFICATIONS
Load
Radius
EX3600-7

EX3600-7 BE Unit: 1000 kg (1,000 lb.)

Load Point Height 8.0 m (26 ft. 3 in.) Load Point
10.0 m (32 ft. 10 in.) 12.0 mHeight
(39 ft. 4 in.) 14.0 m (45 ft. 11 in.) 15.0 m (49 ft. 3 in.) 16.0 m (52 ft. 6 in.) At Maximum Reach
Horizontal Distance from Over Over Over Over Over Over Over
A LOAD RADIUS
Over Over Over Over Over Over Over meters
Centerline of Rotation Front Side Front Side Front Side Front Side Front Side Front Side Front Side (feet)
EX3600-7 BE with 9.6-m (31 ft. 6 in.) boom, 4.5-m (14 ft.Lifting 9 in.) Capacity
arm, 22.0-m3 (28.8 cu. yd.) bucket (SAE) B and LOAD POINT HEIGHT
1270-mm (50 in.) shoes
*25.3 *25.3 *10.2 *10.2 16.0
13 m (42 ft. 8 in. )
(*55.8) (*55.8) C LIFTING CAPACITY (*22.5) (*22.5) (52 ft. 6 in.)
*27.3 *27.3 *9.8 *9.8 16.5
12 m (39 ft. 4 in.)
(*60.2) (*60.2) (*21.6) (*21.6) (54 ft. 2 in.)
*27.8 *27.8 *23.7 *23.7 *9.4 *9.4 17.3
10 m (32 ft. 10 in.)
(*61.3) (*61.3) (*52.2) (*52.2) (*20.7) (*20.7) (56 ft. 9 in.)
*28.6 *28.6 *28.7 *28.7 *21.9 *21.9 *9.5 *9.5 17.7
8 m (26 ft. 3 in.)
(*63.1) (*63.1) (*63.3) (*63.3) (*48.3) (*48.3) (*20.9) (*20.9) (58 ft. 1 in.)
*37.7 *37.7 *35.4 *35.4 *33.0 *33.0 *29.0 *29.0 *10.1 *10.1 17.8
6 m (19 ft. 8 in.) (*83.1) (*83.1) (*78.0) (*78.0) (*72.8) (*72.8) (*63.9) (*63.9) (*22.3) (*22.3) (58 ft. 5 in.)
*74.0 *74.0 A*52.8 *52.8 *40.4 *40.4 *34.5 *34.5 *22.5 *22.5 *11.3 *11.3 17.6
4 m (13 ft. 1 in.) (*163.1) (*163.1) (*116.4) (*116.4) (*89.1) (*89.1) (*76.1) (*76.1) (*49.6) (*49.6) (*24.9) (*24.9) (57 ft. 9 in.)
*76.7 *76.7 *57.5 *57.5 *44.3 *44.3 *38.8 *38.8 *25.3 *25.3 *13.2 *13.2 17.1
2 m (6 ft. 7 in.) (*169.1) (*169.1) (*126.8) (*126.8) (*97.7) (*97.7) (*85.5) (*85.5) (*55.8) (*55.8) (*29.1) (*29.1) (56 ft. 1 in.)
*73.9 *73.9 *55.9 *55.9 *42.2 *42.2 *36.0 *36.0 *13.8 *13.8 16.2
(*79.4)A LOAD
0 (Ground) (*162.9) (*162.9) (*123.2) (*123.2) (*93.0) (*93.0) (*79.4)RADIUS (*30.4) (*30.4) (53 ft. 2 in.)
*65.8 *65.8 *50.3 *50.3 *36.6 *36.6 *29.1 *29.1
(*64.2)B LOAD
-2 m (-6 ft. 7 in.) (*145.1) (*145.1) (*110.9) (*110.9) (*80.7) (*80.7) (*64.2)POINT HEIGHT
*61.0 *61.0 *52.2 *52.2 *39.6 *39.6 *24.6 *24.6
-4 m (-13 ft. 1 in.) (*134.4) (*134.4) (*115.1) (*115.1) (*87.3) (*87.3) (*54.2) (*54.2) C LIFTING CAPACITY
*49.2 *49.2 *42.9 B *42.9 *31.5 *31.5
-5 m (-16 ft. 5 in.) (*108.5) (*108.5) (*94.6) (*94.6) (*69.4) (*69.4)
*Indicates hydraulically limited capacity; numbers without * indicate stability-limited capacities, in kg. The load point is a hook (not standard equipment) loaded on the back of the bucket.
Lifting capacity of the EX Series does not exceed 75% of tipping loadCwith the machine on firm, level ground or 87% full hydraulic capacity. Ratings are based on SAE J1097.

A Load radius
B Load point height
C Lifting capacity
B

34
 ADDITIONAL EQUIPMENT

EX3600-7

Key: l Standard s Optional or special kit

3600 Engine 3600 Cab (continued) 3600 Monitor Systems (continued)

l Auto-idle system l Footrest l Engine coolant level
l Cartridge-type engine oil filter l Front windshield washer l Fuel temperature
l Cartridge-type fuel filter l Hot & cool-box l Engine oil pressure
l Laminated glass windshield (Front) l Engine oil temperature
l Emergency engine stop system
l OPG top guard level ll (ISO 10262) l Air intake manifold temperature
l Engine room cooling fan l Parallel-link-type intermittent windshield wiper l Crankcase pressure
l Fan guard l Pilot control shut-off lever l Pump transmission oil level
l Heavy-duty type air cleaner with dust ejector l Rearview mirror l Hydraulic oil level
l Hydraulic drive cooling-fan system l Reinforced/tinted (Green color) glass side and l Stop valve close
l lsolation-mounted engine rear windows l Fast-filling system panel position
l Pre-lubrication system l Roll screens l Stairway position
l Seat belt l Electric lever fault
l Radiator reserve tank
l Storage spaces Fast-Filling System
l Water filter Fast-filling system for fuel, hydraulic oil coolant,
l Trainer’s seat l
l 140 A alternator l 4 color monitor cameras ; 2 front and 2 rear swing device oil, pump transmission oil, engine
Hydraulic System Monitor Systems oil, and grease (Couplers not included). DEF (only
l Bypass filter Meters for Cummins Tier4F)
l Control valve with main relief valve l Ambient temperature l Fast-filling couplers (Wiggins)
l Drain filter l Clock Data Logging System
l E-P control system l DEF gauge (only for Cummins Tier4F) l Data-Logging Unit (DLU) continuously records
l Forced-lubrication and forced-cooling pumpdrive l Engine coolant temperature gauge the performance of the engine and the hydraulic
system l Engine oil pressure gauge system; data can be downloaded by PC. And for
l FPS (Fuel-saving Pump System) l Engine oil temperature gauge Fleet management system (Provided by Wenco
l Full-flow filter l Fuel gauge etc.) connection**
l High-pressure strainer l Grease gauge l WIU (Wireless Interface Unit)
l Hydraulic drive cooling-fan system l Hour meter l Communication system (Alternative)** GPRS
l OHS (Optimum Hydraulic System) l Hydraulic oil temperature gauge communication system Satellite data
l Pilot filter l Inclinometer transmitting system
l Regeneration circuit for boom down function l Tachometer Lights
l Suction filter l Travel mode l 2 entrance halogen light
Undercarriage Warning indicators (red) l 10 working LED light
l Grease-less center joint l Alternator l 8 maintenance halogen light
l Hydraulic track adjuster with N2 gas l Engine stop
accumulator with relief valve Miscellaneous
l Coolant overheat
Travel motion alarm device l Auto-lubrication system (Lincoln) for
l l Hydraulic oil level
Travel parking brake front-attachment pins, swing bearing
l l Auto lubrication
Swing circle excess grease scraper l Recirculation air filter for air conditioner
l l Tension (Track Adjuster)
Swing circle lubrication piping protection l Stairs and handrails (Meeting ISO)
l l Electric lever
1270 mm (50 in.) triple grouser shoes l Stop valve for transport and reassembly
l l Emergency engine stop
Upperstructure l Ventilation air filter for air conditioner
l Stop valve
Cab riser pressurizer l 12 V power terminal board
l l Engine over run
Dual isolator switch Optional Equipment
l l Coolant level
Electronic cylinder stroke control system s Aerial Angle
l l Engine oil pressure
Emergency escape device s Cold weather package
l l Pump transmission oil level indicator
Folding stairs with wide steps s Standard tool kit
l Warning indicators (yellow)
Hydraulic drive grease gun with hose reel s Travel motor guard
l l Exhaust temperature
Lockable machine covers s Travel transmission guard
l l Fast-filling
Swing parking brake s Center track frame cover
l l Fuel temperature
40 300 kg (88,846 lb.) counterweight s Additional fuel filter (PARKER FBO-14)
l l Engine warning
(Inc. bolt etc.) s Front cab guard
l Hydraulic oil overheat
Cab l Stairway position
l Adjustable reclining seat with air suspension l Electrical equipment box
l Air conditioner* with defroster l Pump contamination
l Air horn with electric compressor l Air cleaner restriction *Contains fluorinated greenhouse gases,
l Auto-tuning AM-FM radio with digital clock Alarm buzzers Refrigerant type: HFC-134a, GWP: 1430,
l Evacuation hammer l Overheat Amount: 2.85 kg, CO2e: 4.08 ton.
l Floor mat l Engine coolant pressure **The availability of the system depends on
l Fluid-filled elastic mounts licensing regulations in each country.
See your Hitachi dealer for further information.

35
 HitachiConstruction.com
Hitachi Construction & Mining Division – Americas
DKD36007HT Litho in U.S.A. (20-07) 1300 River Drive • Moline, IL 61265