Scribd
Upload
31 views

Module 103 - Electrical Hazard Recognition (2)

The document outlines basic concepts of electricity, emphasizing the flow of electrons and the necessity of a power source in a closed circuit. It highlights the importance of inspecting electrical cords and equipment for damage, maintaining clear access to electrical panels, and recognizing electrical hazards such as exposed wiring and trip hazards. Additionally, it advises against daisy chaining power strips and stresses the need for proper covers on junction boxes and fittings.

Uploaded by

Patrick Ecleo Arranguez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
31 views

Module 103 - Electrical Hazard Recognition (2)

The document outlines basic concepts of electricity, emphasizing the flow of electrons and the necessity of a power source in a closed circuit. It highlights the importance of inspecting electrical cords and equipment for damage, maintaining clear access to electrical panels, and recognizing electrical hazards such as exposed wiring and trip hazards. Additionally, it advises against daisy chaining power strips and stresses the need for proper covers on junction boxes and fittings.

Uploaded by

Patrick Ecleo Arranguez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

LESSON 103

Basic Concepts of Electricity


• Electricity is the flow of electrons
(current) through a conductor.
• Requires a source of power: usually
a generating station.
• Travels in a closed circuit.
• When you become part of the
circuit, the injury may be fatal.
Electrical Hazard Recognition
• Cords & Equipment
• Power tools and extension cords
must be inspected each time they
are used.
• They must be taken out of service
immediately upon discovery of
worn or broken insulation.
Electrical Hazard Recognition
• Cords & Equipment
• Visually inspect electrical equipment before each use
for damage and/or external defects such as loose,
missing or deformed parts, pinched or crushed outer
jackets or insulation. This type of external damage may
indicate internal damage to the equipment.
• Electrical cords that are worn or damaged must be
replaced without delay.
• Before cleaning electrical equipment, turn it off and
unplug it.
Electrical Hazard Recognition
• Electrical Panels
• Electric panels must be kept clear of
any obstructions at all times.
• Storage is not allowed in electrical
vault or service panel rooms. Find
another place for storage of
materials, products, etc.
Electrical Hazard Recognition
• Trip Hazards
• Don’t cause tripping hazards
or create pinch points for
cords.
• If you must run a cord
temporarily across the floor,
protect your co-workers by
covering the cord
appropriately.
Electrical Hazard Recognition
• Exposed Wiring
• Assume all exposed wiring is
energized until proven otherwise.
• Stop, protect the area, and contact
supervision if you encounter this
situation.
Electrical Hazard Recognition
• Power Strips
• Never daisy chain multi-
outlet strips (plugging
into each other)
Electrical Hazard Recognition
• Junction boxes, pull boxes,
and fittings must have
approved covers in place.
• Unused openings in
cabinets, boxes, and fittings
must be closed (no missing
knockouts).
• Report these situations to
your supervisor.

You might also like