CONSTRUCTOR
3000
POWERFUL
CONSTRUCTION
ROV
The CONSTRUCTOR technology is refined from years of operational and
“hands-on” experience by our designers. The top-side control system for
KYSTDESIGN ROV’s is designed with focus on providing an ergonomic, intuitive
and efficient working environment. Single or dual operation stations can easily
be configured to individual needs. Operator task priorities can be switched and
shared between stations during operation.
The CONSTRUCTOR can accommodate up to 26 additional hydraulic tooling functions, up to 25
additional survey sensors and 10 camera connectors. 24 hydraulic functions are proportionally
controlled, and all electrical power supplies are ground fault monitored. The ROV control system offers
a variety of auto-functions like AutoPOS and AutoTRACK capabilities. Remote control is also available.
SPECIFICATIONS, CONSTRUCTOR 3000
General: Sensor Interface 12 connectors are prewired for user/survey equipment.
Power 160 Kw / 220 Hp In addition 11 extra connectors can be installed.
Depth rating ROV 3000 msw Survey Sensors 1 to 8
Connector type: Seacon Min-K-10 - wired for 24/48VDC.
Depth rating Buoyancy 3000 msw
Built in CP interface
Dimensions (L/W/H) 3220 / 1700 /1900 mm
Survey Sensor 9 to 12
Weight ~4600 kg
Connector type: Seacon Min-K-8 - wired for 115VAC.
Payload 450 kg
Through Frame Lift capacity 3000 kg Camera and Lights:
Thrusters 7 x SA380 Camera Interface 10 camera inputs.
Connector type: Seacon 5506-1508 or MinL-coax.
Mechanical Capacity and Interfaces: One camera interface is a combined manipulator
Free space inside ROV for Open area of approx. 460 L through the entire ROV, communication and camera connector. HD is optional.
F/Z lines are bipolar/VISCA/IP
utility equipment: right in front of centre of gravity.
Pan/Tilt Electrical
Interface for work modules: Four docking receptacles underneath the ROV.
Light Interface Capacity for ten dimmable lights, maximum load of
Interface for Sensors and/ or modules by threaded
30A. Each output secured by 6A breakers.
inserts on all sides of the buoyancy element. Connector type: Seacon 5506-1503
Manipulators: Interface for Schilling T4, RigMaster and Atlas.
Performance:
Hydraulic Capacity and Interfaces: Bollard Pull FWD/AFT 900
Valve Pack No. 1 10 x Bi-directional Valves with proportional flow Bollard Pull LATERAL 850
control, each with max flow 10 l/min. Pressure on Bollard Pull Vertical UP 800
Bollard Pull Vertical DOWN 900
VP controlled by VP No.3.
Speed FWD > 1,7 m/s
Valve Pack No. 2 10 x Bi-directional Valves with proportional flow
Speed LATERAL > 0,9 m/s
control, each with max flow 10 l/min. Pressure on
VP controlled by VP No.3. Pilot Interface:
Valve Pack No. 3 4 x Bi-directional Valves with proportional flow and - Two identical pilot chairs, where all necessary controls for operating the ROV, TMS
pressure control, each with max flow 90 l/min. and PDU are integrated in the armrests
Manifolds Pressure and return manifolds mounted in front - Multiview Controllers
of the ROV. - Monitors
- 1 x Pilot operated high flow valve with max flow - Clearcom communication system, microphone and channel selectors integrated in
pilot chair
160 l/ min on AUX system
- 1 x Pilot operated high flow valve with max flow
PDU:
250 l/ min on main system
Description Two separate cabinets. One containing breakers,
Aux System Capacity 220 bar, 160 l/min contactors, overload relays and signal trans-
formers. The other serving as a termination and
Telemetry/Sensor Capacity and Interfaces: isolation point for all high voltage connections.
Telemetry Link By default the control pod and telemetry system are Input 3 phase 400-420-440VAC, 60 Hz (690VAC optional)
prepared for survey operations. Up to 6 fibre optic Output - ROV HPU 230 KVA, 4200-4350-4500VAC
cables are available for communication. Total capacity - ROV Instrument 10 KVA, 3000-3150-3300VAC
- TMS HPU 23 KVA, 3000-3150-3300VAC
in a standard system is 8 composite video channels,
- TMS Instrument 10 KVA, 3000-3150-3300VAC
36 serial communication channels and expandable to
include 4 HD video channels (all in a single optical fibre).
Containers (Option):
Options are Ethernet, gigabit layer 1 (4 ports) with ROV Control Container - 20´ Container manufactured in accordance with
ethernet switch (4 ports), and Multibeam PECL. DNV 2.7-1 Offshore Containers
Power Distribution All power distributed to external users, such as lights, - Dimensions: 6058 / 2438 /3000 mm (L/W/H)
cameras and sensors can be switched on/ off from - Air conditioned
the topside computer and are equiped with individual - Option: Zone 2 certification
fuses. When a sensor is switched off, it’s correspond- ROV Workshop / - 20´ Container manufactured in accordance with
PDU Container DNV 2.7-1 Offshore Containers
ing subsea connector is galvanic isolated. Total
- Dimensions: 6058 / 2438 /3000 mm (L/W/H)
available power 20A @ 115VAC. Available supplies:
- Air conditioned
115VAC, 24VDC, 48VDC, others on request.
- Contain workshop, PDU and transformers.
Tool Interface Max power consumption available is 20A @ - Option: Zone 2 certification
115VAC. Connector type: Seacon 5506-2008
Gyro Interface Connector type: Seacon MinM-26#20, other on request TMS (Option):
Various options available. Contact Kystdesign for further information.
kystdesign.no
Kystdesign AS [email protected] +47 52 70 62 50
