Scribd
Upload
16 views1 page

Electrode Booklet 22

Supabase X Plus (S) is a high deposition efficiency electrode designed for 500 MPa tensile strength steel, classified under EN ISO 2560-A and AWS A/SFA 5.1. It features low hydrogen content, medium penetration, and is suitable for various applications including boilers, bridges, and shipbuilding. The electrode has specific chemical and mechanical properties, with a typical deposition efficiency of 125% and is available in multiple sizes and amperage ratings.

Uploaded by

achapagain.ramanconstruction
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views1 page

Electrode Booklet 22

Supabase X Plus (S) is a high deposition efficiency electrode designed for 500 MPa tensile strength steel, classified under EN ISO 2560-A and AWS A/SFA 5.1. It features low hydrogen content, medium penetration, and is suitable for various applications including boilers, bridges, and shipbuilding. The electrode has specific chemical and mechanical properties, with a typical deposition efficiency of 125% and is available in multiple sizes and amperage ratings.

Uploaded by

achapagain.ramanconstruction
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SUPABASE X PLUS (S)

C-Mn STEEL (Low Hydrogen)

High Deposition Efficiency Electrode For 500 MPa Tensile Strength Steel
CLASSIFICATION : EN ISO 2560-A AWS A/SFA 5.1 IS 814

E 42 3 B 32 H5 E 7018 H4 R E B5426H3JX

KEY FEATURES :

• Basic coated electrode • High deposition efficiency typical 125%


• Smooth surface finish • Radiographic weld quality
• Low hydrogen iron powder type • All position capability
• Medium penetration

WELDING POSITION : AC (70 OCV)/ DCEP

TYPICAL APPLICATIONS :

• Boilers, Pressure vessels • Bridges, Pipe lines, Penstocks


• Heavy structures subject to dynamic loading • Joining IS 2002, 2062 steels
• Ship building, Storage tanks

REDRYING CONDITION : 250-300OC for minimum 1 hr.

CHEMICAL COMPOSITION OF UNDILUTED WELD METAL, Wt % :


C Mn Si S P
Typical 0.05 1.3 0.5 0.015 0.02
Specification 0.12 max 1.60 max 0.70 max 0.03 max. 0.03 max.

MECHANICAL PROPERTIES OF ALL WELD METAL :


YS at 0.2% CVN Impact at
Condition UTS, MPa EL%
offset, MPa -30°C, J

Typical PWHT: 620OC


535 440 34 120
for 5 hrs
Typical 560 480 32 60
As Welded
Specification 500 min 400 min 22 min 27 min

Hardness, 3 Layer: 200 BHN max Diffusible H2 Content: <4 ml/100 gm


Typical Deposition Efficiency: 125 %
PARAMETERS - PACKING DATA :
Ø x L, mm Amperage, A Wt./Carton, Kg Carton/Box Net wt./Box, Kg
2.5 x 350 60-90 5 4 20
3.15 x 450 100-130 5 4 20
4.0 x 450 140-180 5 4 20
5.0 x 450 180-240 5 4 20

PASSION FOR WELDING SINCE 1951 www.adorwelding.com

22

You might also like