COC 1 – INSTALL AND CONFIGURE - Select Custom: Install Windows only

(advance)
COMPUTER SYSTEMS
- Delete unnecessary Drives > New
BIOS Configuration - Set the Partition Size (The TESDA Assessor will
give the size of the partition.) > Apply
- Turn on PC
- Select the created partition > Next
- Restart PC
- Press Del / F2 > Boot tab
…Installing Windows…
- set Removable Devices as the primary boot
- Save and Exit. - Default User name: Administrator
- Set the Password: Css@12345

CLIENT
…Wait until the login page appear…
INSTALLATION OF CLIENT (WINDOWS 10)
- Press Ctrl+Alt-Delete to unlock
- Set the Language to install: English (United - Type the password > Enter
States)
- Time and Currency format: English (United
States) --- CONGRATULATIONS!---
- Keyboard or input method: US
- Next > Install Now
- Patch the Windows 10 License key / select I
don’t have a product key to proceed.
- Next
COC 2 – SETUP COMPUTER NETWORKS
- Select type of License: e.g. Windows 10 Pro CLIENT
- Select I accept the license terms.
SET DYNAMIC IP ADDRESS TO CLIENT
- Next
- Go to Control Panel > Disable and Enable
- Go to Control Panel > Network and Internet
- Network and Sharing Center
PARTITIONING
- Click Change adapter settings
- Select Custom: Install Windows only - Right click the Ethernet
(advance) - Click Properties > IPv4
- Delete unnecessary Drives - Obtain the IP Address automatically
- Select the Drive that will use for installing - Obtain the DNS server automatically
- Once the disk is Unallocated, select New - Search Firewall > Turn Off all
- Multiply to .60 and Set the Partition Size - Go to CMD > Type ipconfig
(MB). - Copy the IP Address of Default Gateway
- Apply > Ok
- Select the partition allocated for OS > Next
SETUP ROUTER AND ACCESS POINT SSID AND
…Loading… PASSWORD

- Paste the IP Address of Default Gateway in the

- Select United States > Yes > US > Yes > Skip
browser
- Select Set up for personal use > Next
- Username: admin
- Offline Account > Limited experience > Next
- Password: admin
- Input the Name of the user > Next
- Go to Wireless
- Set the Password: Css@12345 > Next
- Change the Network Wireless Name to your
- Choose the privacy setting > Skip > Not now
LASTNAME-ROUTER (Ex. Dela Cruz-RT) > Save
- Go to Wireless Security
- Change the Wireless Password to Css@12345
SERVER

INSTALLATION OF WINDOWS SERVER 2016

CONFIGURE THE ROUTER AND ACCESS POINT IP
- Yung BIOS Configuration na steps ulit ADDRESS USING CLASS A, B, C

…Loading… - Go to Network > LAN

- Change the IP Address to the given Class of IP
- Next > Install Now Address. (Ex. Using Class A, IP Add:
- Patch the Windows 10 License key / select I 80.80.80.80, SM: 255.0.0.0) > Save
don’t have a product key to proceed > Next (Avoid input using starting 1-5)
- Select type of License: e.g. Windows 10 Pro
… the browser will refresh…
- Select I accept the license terms > Next
 - Copy the IP Address you input earlier from - Set the new Computer Name to your
Default Gateway LASTNAME
- Paste in the browser - Change the WORKGROUP to SERVER2024
- Login again - Click Ok > Close and Restart
- Go to DHCP > Enable
- Input the start IP address and end IP address
for the DHCP range. (Ex. Start IP Add: SET STATIC IP ADDRESS ON SERVER
80.80.80.85, End IP Add: 80.80.80.90) > Save - Go to CMD > type ipconfig
- Go to System Tools > Reboot - Copy the IPv4 Add: (Ex. 80.80.80.85)
- Copy the default gateway (80.80.80.80). it
… the browser will refresh… should be the same IP Add you input earlier in
the DHCP on the router > Ok
CONDUCT TESTING WITH MAC FILTERING

- Go to Wireless > Wireless MAC Filter CONDUCT TESTING USING PING COMMAND
- Look for MAC Filtering / Access Control and - Open CMD > Type ping Client’s IP (e.g. ping
enable it 80.80.80.86).

You will typically see two modes:

CLIENT
➢ If you select Allow, add the MAC Testing of Client’s Network Connectivity
addresses of the devices you want to - Open CMD > Type ping Server’s IP (e.g. ping
permit 80.80.80.85)
➢ If you choose the Deny, add the MAC
addresses of the devices you want to block
SERVER
- You can edit the description if you want and INSTALL ACTIVE DIRECTORY SERVICE WITH DOMAIN
enable > Save NAME ON SERVER (CSS.ORG) AND INSTALL DNS
- Open Server Manager > Manage
Conduct Testing: - Add Roles and Features > Next
➢ If the connection is successful and you’re - Select Role-based or feature-based installation
able to connect to the Wi-Fi, it means your - Next > Select a server from the server pool
phone’s MAC address is not blocked - Next > Active Domain Services > Add Features
➢ If you receive a connection failure or - DNS Server > Next > Add Features > Next
your phone can’t join the network, your - Next > Next > Install
phone’s MAC address is blocked
…Installing (DON’T CLOSE)…

- Select Promote this server to a domain

--- CONGRATULATIONS!---
controller > Add a New Forest
- Set Root domain name. e.g. CSS.ORG > Next
- Set DSRM password (e.g. Css@12345) > Install
- Next > Next > Next > Install
COC 3 - SETUP COMPUTER SERVER
…installing and automatic restart…
CLIENT
- Click Close > Go to Control Panel
SET COMPUTER NAME ON SERVER AND CLIENT - Network and Internet > IPv4 Properties
- Go to Control Panel > System - Copy the IP Add (80.80.80.86)
- Change Settings > Change
- Paste it in the Preferred DNS server > Ok
- Set the new Computer Name to your
FIRSTNAME
- Change the WORKGROUP to SERVER2024 > Ok INSTALL NEW REVERSE LOOKUP ZONE
- Close and Restart - Go to Server Manager > Tools > DNS
- Go to Control Panel > Network and Sharing - Create a Reverse Lookup Zone (if it’s not
- Advanced Sharing already created):
- Turn on Network Discovery > Turn on All ➢ In DNS Manager, expand server name
- Turn off password > Restart Now ➢ Right-click Reverse Lookup Zones
➢ Select New Zone.

SERVER - Click Next -- Primary zone > Next

- IPv4 Reverse Lookup Zone > Next
Computer Name (SERVER)
- In the Network ID, type from the first to third
- Go to Control Panel > System Octet of IP Add of server (e.g. 80 | 80 | 80)
- Change Settings > Change - Click Next > allow secure only dynamic updates
 - Click Next > Finish - Active Directory Users and Computers
- Dropdown the reverse lookup zones - Right click Domain Name
- New > Organizational Unit
- Right click the IP Add (80.80.80.in.addr.arpa) - Create name (e.g. MY_OU)
- Click New Pointer (PTR) > Browse - Right click Organizational Unit > New > User
- Double click the Forward... - Fill out personal information > Next
- Double click the domain name (CSS.ORG) - Input your password: Css@12345
- Choose (same as p...) > Ok > Ok - Then uncheck User must change password at
next logon
- Go to CMD > Type nslookup - Check User cannot change password &
- Should be the Default Server is your domain Password never expires > Next > Finish
name (CSS.ORG), and the Address is the - Create another user (could be your nickname)
server’s IP Add - Input your password: Css@12345
- Then uncheck User must change password at
next logon
CLIENT - Check User cannot change password &
INSTALL DHCP (INSTALL NEW SCOPE) Password never expires > Next > Finish
- Go to Browser and Login
- Go to DHCP > Click Disable
CREATE FOLDER USING DIRECTORY FORMAT
SERVER - Go to File Explorer > This PC
- Open Server Manager > Manage - Create New folder and name it SERVER
- Select Add Roles and Features > DHCP Server - Right click SERVER folder > Properties
- Next > Add Features > Next > Next > Install - Go to Sharing > Share > Click the arrow icon
- Select Everyone > Add
…Installing (DON’T CLOSE)… - Change the permission level to Read/Write
- Click Done > Advanced Sharing > Permission
- Click Complete DHCP configuration
- Administrators > Remove > Everyone
- Next > Commit > Close > Close
- Remove > Add > Type Everyone
- Click Check Names > OK > Check Full Control
SERVER - Click Apply > OK > Apply > OK
- Go to Server Manager > Tools > DHCP
- Expand IP address > Right click IPv4
CONFIGURE FOLDER REDIRECTION
- Click New Scope > Next
- Go to Server Manager > Tools
- Create name (e.g. MYSCOPE) > Next
- Click Group Policy Management
- Create new IP address range (e.g. from
- Right click Organizational Unit
’80.80.80.85 – 80.80.80.90’ to ’80.80.80.100 –
- Select create a GPO
80.80.80.105’)
- Create name (e.g. MY_GPO) > OK
- Next > Next > Next
- Right click your GPO > Select Edit
- Input your router’s IP Address
- Expand User configuration > Policies
- Click Add > Next > Next > Finish
- Windows settings > Folder Redirection
- Expand Folder Redirection
CLIENT - Select and Right click Desktop
- Go to CMD > Type ipconfig/release - Select Properties
- Type ipconfig/renew - Change the Setting to Basic
- Paste the root path (e.g. \\Delacruz\server)
…Network notification will pop up… - Click Settings > Uncheck Grant the user
- Check Move the contents & Also Apply
- Click Yes - Click Apply > OK
- Go to Control Panel > System
- Change Settings > Change > Domain CLIENT
- Type your domain name > Ok - Select Other User
- Type Administrator and password of your - Log in the user you created
computer server > Ok

SERVER
SERVER - File Explorer > This PC > Serer folder
INSTALL FILE SERVICES Note: The user you log in on client must be there
- Open Server Manager - Click the user account
- Manage > Add Roles and Features Note: Desktop should be there
- Click File Server Resource Manager > Next - Click Desktop > Create a Text Document
- Click Add Features > Next > Install > Close

CLIENT
CREATE ATLEAST 2 USER ACCOUNT Note: the text document you created on the
- Go to Tools server must appear on the client’s desktop
 --- CONGRATULATIONS!---

SERVER
CONFIGURE FILE RESOURCES MANAGER COC 4 – BACKUP FILES
- Go to Server Manager > Tools SERVER
- File Server Resource Manager - Go to File Explorer > Format Local Disk (D:)
- Expand File Screening Management - Go to Desktop > Create a Text File
- Right click File Screen Template - Go to Server Manager > Tools
- Click Create File Screem - Windows Server Backup > Local Backup
- Create Template Name (e.g. test_screening) - Backup Once > Next > Custom > Next
- Select the file you want to block (e.g. Image - Add Items > + Local Disk C: > + Users
Files) > OK > Right click File Screens - + Administrator SERVER > + Desktop
- Select Create File Screen - Check the Text File you created > OK > Next
- In Derive properties, select the template you - Next
created > Browse - Set the Backup destination to Local Disk D:
- Next > Backup > Close
CLIENT
- Go to Desktop > Delete the Text File
- On the Desktop, right click then select New
- Choose Bitmap Image or notepad - Go to Server Manager > Recover > Next > Next
- Next > + SERVER > + Local Disk C: > + Users
Note: A notification will appear that you need
permission - + Administrator SERVER > Desktop > Next
- Next > Recover > Close
- Check the file on the Desktop if it recovered
SERVER
INSTALL PRINT AND DOCUMENT SERVICES
- Go to Server Manager > Manage --- CONGRATULATIONS!---
- Add Roles and Features
- Print and Document Services > Next
- Window Server Backup > Next > Next
- Check Print Server > Next > Install > Close

CONDUCT TESTING AND PERFORM FILE AND PRINTER

DEPLOYMENT
- Go to Tools > Print Management
- Expand Print Servers
- Right click Devices Name
- Select Add Printer > Add a new printer > Next
- Click Install a new driver > Next
- Choose a type of printer > Next
- Check Share this printer > Next > Next > Finish
- Printers
- Select and right click the printer you choose
- Deploy > Browse > Double click MY_OU
- MY_GPO > OK > Check The users > Add > OK
- OK

CLIENT
CONDUCT TESTING AND PERFORM FILE AND PRINTER
NETWORK SHARING
- Go to Control Panel > Hardware and Sound
- Devices and Printers
- Check and right click the brand of printer you
created earlier > Printer Properties > Sharing
- Check Share this printer

SERVER / CLIENT
- Go to File Explorer > Network
- Refresh to appear the computer name of
server/client and double click
- Look for the brand of your printer
- Right click the printer > Connect