JOB:

ITEM NO:

INSULATED HEATED
STAINLESS STEEL BANQUET CART
MODEL CCB-120A

FEATURES AND BENEFITS:

• Fully insulated banquet cart designed to hold

plated covered meals.
• Self contained power top lifts off for easy
cleaning.
• Easy-to-read eye level controls.
• Standard 1650 Watts, 120 Volts, 15 Amps
Provides quick heat up to 200˚F (93˚C).
• Use for short term cold food storage. Factory
installed slides hold 2 accessory Kold Keepers.
• Stainless steel construction throughout for ease
of cleaning.
• Two inch thick insulation for energy efficiency. CCB-120A

• Supplied with six wire grid shelves; easily

removed yet secure.
® ®
• Fully insulated doors swing flush to sides; latch in C US
place for ease of loading and unloading. SANITATION
NSF/ANSI 4
• Recessed push/pull handles on both sides
prevent damage to walls; allows easy
maneuvering. ACCESSORIES and OPTIONS
• One piece welded base with perimeter bumper (Available at extra cost):
provides solid foundation to support heavy loads. q Gravity Transport Latch
• Heavy duty 6" modulus wheels, two swivel with q Menu Card Holder
brakes. Rolls easily, even over carpeted surfaces. q Digital Thermometer
Staggered mounting provides mobility when fully
loaded especially over uneven surfaces. q Thermometer Cover
q Kold Keepers
q Various Caster Options
q 240 Volt Service
See page F-4 for accessory details.

Page F-1
5925 Heisley Road • Mentor, OH 44060-1833 Jan., 2013
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
 CCB-120A

A B 4
14
ON

OFF

B G
W

C
5-15P

MEAL CAPACITY
CRES COR DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS* WEIGHT
COVERED PLATE DIA.
MODEL NO. ACT.
11" 11-3/4" 13" WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
IN 59 32-3/8 68-7/8 22 23 50-1/2 LBS 530
CCB-120A 120 90 60
MM 1500 825 1745 560 585 1285 KG 240
*Dimensions for each side.
Capacity based on covered plate dia. with nesting height of 3" for plate and cover.
ALL CONSTRUCTION IS RIVETED, WELDED AND FINISHED.

CABINET: HOT UNIT COMPONENTS:

• Body: 22 ga. non-magnetic stainless steel. • Body: Formed of 20 ga. non-magnetic stainless steel with black
• Inner Liner: 22 ga. 300 series stainless steel. powder coated control panel.
• Reinforcement: Internal framework of 14 ga. 300 series stainless • Removable without tools.
steel. • Thermostat: Electro-mechanical, ambient to 200˚F (93˚C).
• Insulation (walls, doors, base): 2" fiberglass, thermal conductivity • Switch: ON-OFF rocker type.
• (K factor) is .23 at 75˚F. • Thermometer.
• Push handles: 1" dia. stainless steel tubing, recessed on both • Power cord: Permanent, 10 ft., 14/3 ga. with molded plug.
sides. • Heaters (2): 750 Watts each.
• Rack insert posts: Removable 18 ga. 300 series stainless steel • Blower motors (2).
channels. • Slides for Kold Keeper (2 cap.).
• Metal strain relief.
BASE:
• One piece construction, .190 aluminum, welded. POWER REQUIREMENTS:
• Casters: 6" dia., modulus tires, 2" wide, load cap. 450 lbs. each, • 1650 Watts, 120 Volts, 60 Hz., single phase, 13.8 Amps., 15
temp. range -45˚/+180˚F. Zerk fittings in hub. Two rigid type. Two Amp. service.
swivel type equipped with brakes.
• Perimeter bumper: Gray, non-marking rubber, 1 x 1.
SHORT FORM SPECIFICATIONS
DOORS:
• Formed 22 ga. non-magnetic stainless steel. Cres Cor Heated Banquet Cart Model CCB-120A.
• Latches: Polished stainless steel, slam type; mounted inboard. Cabinet 22 ga. non-magnetic stainless steel. Doors
• Door gaskets: Perimeter type, silicone. and body 2" fiberglass insulation. Eye level controls on
• Pan stop channels: 22 ga. 300 series stainless steel attached to removable top. Doors swing 270˚; held open on friction
inner doors. catches. Recessed side push handles. Six nickel chrome
• Swings 270˚ on two heavy duty butt hinges; held open on friction plated wire grids. Capacity 120 covered meals. Base one
catches. piece .190 aluminum, welded and finished, perimeter
PAN SLIDES: bumper. Six inch modulus casters. Load capacity 450 lbs.
• Angles: Formed 16 ga. 304 stainless steel. each. 1650 Watts, 120 Volts, 60 Hz., 1 Phase, 15 Amp.
• Three sets of 1 x 1 angles on each side. service. 2-Year Parts / 1-Year Labor warranty. Provide
• Shelves: Six nickel chrome plated wire grids, 21-1/2 x 22-1/2. the following accessories: ____ _____ _____ CSA-US,
• Shelf clearance: 16” between shelves; adjustable on 1-1/2" CSA-C, CSA to NSF4 listed.
centers.

In line with its policy to continually improve its products,

5925 Heisley Road • Mentor, OH 44060-1833 CRES COR reserves the right to change materials and
Phone: 877/CRESCOR • Fax: 440/350-7267 specifications without notice.
www.crescor.com
© Crescent Metal Products, Inc. 2013 All rights reserved. Litho in U.S.A.