Bodycarving master
Regazi multi-dimensional
body carving master
Continuous use
S
Charming curve
Various probes are used to relieve body
fat and soreness
Effective management to relieve fatigue
Through the thermal current 448KHz activated cells to generate motion
heat energy, promote blood and lymphatic circulation, can be
In order to restore skin elasticity, tighten skin to promote subcutaneous
fat, improve cellular tissue, improve body To activate body functions to
improve tissue elasticity, promote tissue reconstruction, strengthen veins
and fluids Ba Zai reflux beauty and thin body effect.
Fixed point constant temperature technology
promote the whole body temperature rise
The probe contacts the skin, and heat energy
is continuously input
All parts of the body produce high heat energy
not heat quotient
Skin while continuing to care for all parts of
the body
It is safer and more assured to use hot rather
than hot
Diathermy care Diathermy care
(front) (after)
37 36 34 32 31 28
3.
Reliable temperature
1.
Deep heat conduction
2.
control scheme
Built-in precision temperature Advanced heat transfer technology,
sensor, double temperature and heat energy quickly into deeper parts
double control, more reliable of the heat more lasting
Ceramic conduction head
3. with metal conduction head
Two kinds of material conduction head for
different parts of accurate positioning,
accurate conduction
More than face
One machine to solve a variety of problems
beauty + curve + health one machine to fix
Facial tough and Eye fine Postpartum
relaxation stocky build lines maintenance
Female Joint muscular Fear
deficiency cold discomfort soreness of cold
CAP RES massage gun Stainless steel
Ceramic probe deep internal heat Negative electrode patch
Transmission probe
Utilize CAP to generate thermal energy conduction, and precisely
reach the deep layer of the skin to stimulate the body The ions
achieve the effect of firming the skin, filling wrinkles and re-
storing skin elasticity and luster
Humanized four probes
can be switched arbitrarily
body probe body probe face probe face probe
(large part) (small part) (large part) (small part)
Notes：
After selecting the operation probe, apply the product on the opera-
tion part, and press the operation probe slightly flat Stick to the
skin, start to click "Start", and click "Pause" after the work is
over, and then the head willleave the skin During the operation, the
probe cannot stay in the same position, and it must be operated by
taxi. Energy recommendations from low Slowly increase the gear, keep
asking customers about their feelings during operation, and the energy
level varies from person to person
The temperature effect dries the deep tissue of the human body, and
truly realizes the high-efficiency internal heating technology to acelerate
the human blood Circulation, synchronous non-invasive elimination of
subcutaneous fat and visceral fat for temperature management of the
whole body,Activate cells and improve human immunity.Penetrate subcuta-
neously 12 cm to the superficial, middle and deep fascialayer bidirec-
tional internal circulation
Humanized four probes
can be switched arbitrarily
body probe body probe face probe face probe
(large part) (small part) (large part) (small part)
Notes：
After selecting the operation probe, apply the product on the opera-
tion part, and press the operation probe slightly flat Stick to the
skin, start to click "Start", and click "Pause" after the work is
over, and then the head willleave the skin During the operation, the
probe cannot stay in the same position, and it must be operated by
taxi. Energy recommendations from low Slowly increase the gear, keep
asking customers about their feelings during operation, and theenergy
level varies from person to person
Use EMS biological current to activate cells, dredge meridians, promote
blood circulation and improve blockage.It is widely used in motor limita-
tion,pain during exercise, muscle recruitment, internal epicondyle
pain, external epicondyle pain,Neck shoulder and back leg pain, plantar
fascia pain, heel pain, synovial disease, tendinitis and many other common
diseases Spinal curvature correction is the ace technique of fascia nife.
Before operation After operation
The anterior membrane is re- The fascia layer is tight and
laxed Muscle collapse orderlyPromote tissue absorp-
tion to achieve muscle Q bomb
Notes：
Stainless steel negative patch for use with fascia knife. Put it on the
client.Apply the product to the operating part, press the operating head
closeto the skin, and click "Start".Click "Pause" at the end of the work
and leave the operating head off the skin. During the operation, the head
should not stay In the same position, you have to slide. Energy is recommended
to start at a low level and slowly increase,Keep asking customers how
they feel when operating. Energy varies from person to person.
Use with facial, body probe, fascia knife. The human body forms an
electric circuit
Metal around silicone rubber wrap, avoid energy focus, heat damage
skin design, rest assured
single
stage
negative
plate
Deep heating
Time regulation Setting
return
real time power
intensity adjustment
start pause
Work Work
mode selection
Master of
Multidimensional Ruijiazi
Body Sculpture
length width height Instrument weight
34cm*46*cm*25cm 6.2kg
operating temperature input power
10°C-+40°C MAX350W
Package Size Packed weight
62.5cm*43cm*23.2cm 7.8kg
5-1. introduction
First of all, let us express our heartfelt thanks to the customers who have purchased our
instruments.
This manual is written for customer service to better use this instrument. Hope the compa-
ny's products kimonoI give you the honor and courtesy.
NOTICE：
This product must be used in strict accordance with the use of this manual, misuse
other than the manual All the consequences caused by the method shall be his own responsi-
bility, the company does not assume any responsibility.
The Company makes no warranties of any kind, including (but not limited to) for aparular
purpose An implied guarantee of merchantability and fitness. The Company shall not beliable
for any errors contained in this material, or for any accidental or consequential damages
resulting from the provision, actual performance or use of this manual.
This manual contains proprietary materials protected by patent law. All rights reserved.
Without written consent of the Company,No part of this manual may be photographed, copied,
reproduced or translated into other languages.The content contained in the manual may be
changed without the user's notice.
5-2. manufacturer's liability
The Company is responsible for the safety and reliability of the instrument only under the
following circumstances:Assembly operations, realignments, improvements and repairs are
carried out by personnel approved by the Company for the electrical equipment concerned
Comply with national standards, and the instrument is used in accordance with the operating
instructions.
warning：
This is a life beauty instrument, not a medical instrument, do not use for medical
treatment。
If the beauty institution responsible for the use of this instrument cannot achieve a
satisfactory operation plan, then It will cause abnormal instrument failure and may endanger
human health.
Currently, the company will provide circuit diagrams on request for a fee, along with a
list of calibration methods and other information,To help the user by the appropriate, qualified
technical personnel to repair those classified by the company available by the user In-
strument part for maintenance.
5-3. guarantee
Manufacturing process and raw materials: The company guarantees that the instrument (ex-
cept parts) is in regular use and maintenance condition No breakdown of production process
and raw materials within one year from the date of shipment. None of our tests are perfect
Nothing missing.
5-4. Precautions before use
WARNING：
The operator must be familiar with the instruction manual and operation method.
The instrument must be managed by a specially-assigned person. The setting of
operation parameters should be set under the guidance of professional personnel
NOTICE：
Confirm whether the instrument is in normal operation condition before use;
Make sure the wiring is connected correctly；
Make sure all wires are properly connected and secure；
When the instrument is used, it must be used correctly, otherwise it may be
dangerous and must be paid great attention to
5-5. Precautions in use
WARNING：
When abnormal conditions occur in the operation of the instrument or the pa-
tient, the operator shall immediately leave the operation handle from the pa-
tient and press the stop switch to stop the use of the instrument
NOTICE：
During the operation of the instrument, we should constantly observe the situation of the
beauty guests and the instrument, and pay attention to whether there are abnormal situa-
tions at any time; The instrument shall be properly used by skilled operating technicians.
Personnel other than operating technicians shall not use the instrument.
5-6. Precautions for failure/maintenance/inspection
WARNING：
Do not use the instrument when it is abnormal.
One thousand smoke burnt smell, can not operate the situation, if continue to
use will occur fire contact danger, danger, please quickly press the stop button,
turn off the power, unplug the power plug, immediately contact the company or
dealers;
Personnel other than technical personnel are forbidden to repair and modify the
instrument without permission. The inside of the instrument is forbidden to open,
so as to avoid danger. Violators shall bear the consequences
NOTICE：
During the operation of the instrument, we should constantly observe the situation of
the beauty guests and the instrument, and pay attention to whether there are abnormal
situations at any time; The instrument shall be properly used by skilled operating
technicians. Personnel other than operating technicians shall not use the instrument.
matters need attention
5-7. Operational taboo
Pregnant women, heart, arrhythmia, especially with a pacemaker prohibited
Cancer patients, major surgery patients, diabetes patients prohibited
People with epilepsy and severe hypertension are forbidden to do it
People who are allergic or have serious skin wounds do not do it temporarily
Do not do this with any metal in the body, or with gold implants in the face
It can be used after three months for facial surgery
5-8. Points for attention in use place
WARNING：
Please do not use and connect the socket, so as not to cause fire;
Always turn off the power switch when replacing the fuse, so as not to cause fire and elec-
tric shock；
A power supply of 220V±22 V and 50HZ±1 HZ and an effectively grounded socket must be use
The use of damaged or processed power lines has the risk of fire and electric shock;；
Do not bend and cockle the power cord excessively, in case of fire and electric shock.
If the instrument is loose, fallen or damaged, please contact the company in time;
Do not use this instrument in unstable environment such as tilt, vibration and impact；
There can be no water or debris inside the instrument. If there is a foreign body, please
contact the company in time
The power plug must be unplugged when the instrument is moving.
When the instrument moves, vibration should be avoided as far as possible;
The instrument should be placed in a stable place, and at least 5cm space should be left
around it to ensure Air circulation, conducive to the instrument heat dissipation;
The instrument should not be covered with anything in case the vent is blocked;
Avoid using this instrument in the following environments:
Place of sunlight, high humidity environment, near water environment vibration, inclined
place, strong magnetic field environment, electromagnetic wave, impulse voltage, storage place
of chemical drugs, corrosive gas Body place;
This instrument shall not be used near radio, TV, copier, fax machine, etc.
Do not use with other instruments (such as microwave), so as not to interfere with each
other and cause misoperation.
NOTICE：
Instruments and components must be inspected regularly;
Do not use cleaning tools that damage the protective coating, such as brush,
broom, etc；
If the instrument has not been used for more than 2 weeks, the instrument must
be carefully checked before being used again。
5-9. Warning and suggestive instructions
WARNING：
When the high-frequency equipment and the instrument are connected to the same patient at
the same time, the electrode position of the instrument may cause burns to the skin tissue
of the patient, and may also cause damage to the instrument. When the instrument is used
near the short-wave or microwave equipment (1m), the output of the instrument may be unsta-
ble due to microwave interference. Using electrodes close to the chest increases the risk
of heart fibrillation.
5-10. Care and maintenance
Routine inspection Managers must perform the following checks on instruments and compo-
nents:
Check whether the power socket is reliably connected to the ground. If no, replace the
power socket。
Whether the power cable is deformed, broken or broken: Check whether the power cable
is deformed or deformed by naked eyes. In some cases, it may cause fire due to electric
leakage. Please replace the control handle of the power cable immediately. Check the output
line by the naked eye for deterioration and deformation. If so, please replace it immedi-
ately. Please check whether the prompt content is correct before using the instrument.
5-11. The replacement of a fuse
Size of power fuse 8A(diameter 5×20mm)
When replacing a fuse, follow these steps:
① Turn off the power switch;
② Unplug the power;
③ Use a screwdriver to pry open the fuse casing;
④ Take out a bad fuse and replace it with a new one;
⑤ Reattach the fuse casing to its original position;
⑥ Plug it in.
WARNING：
When replacing the fuse, to prevent electric shock, please turn off the power and unplug
the power。
For a long time (more than one year) to clean the ash inside the instrument, should be
carried out by professional maintenance personnel
When the instrument is not in use, it should be placed in a ventilated and dry place,
and the instrument should be covered with dust cover。
6.warranty card
Product Name: Model:
Production Date: Serial Number:
1、This machine can only be replaced with one machine if quality problems occur with
in 7 days from the date of purchase (with the bill) and the appearance is in good
condition. The main engine is guaranteed for one year (except for wearing parts)If
other parts are not covered by warranty or have passed the warranty period, they can
also be responsible for maintenance and renewal. Within half a year from the date of
purchase, the buyer shall bear the shipping freight and the seller shall bear the shipping
cost. The freight over half a year shall be borne by the buyer
2、For the failure caused by the following personal reasons, no free warranty
service is provided;
① Failure caused by unauthorized disassembly and modification of the product;
② Failure caused by careless fall or fall;
③ Failure caused by lack of reasonable maintenance;
④ Failure caused by failure in accordance with the correct instruction manual;
Customer name: Purchase Date:
Sddress:
Contact Number:
Dealer Name: Contact Name:
Address:
Contact Number:
Delivery Date:
Warranty Record: Maintenance Date:
Delivery Date:
Model:
Customer's Name:
Cause Of Issue:
Contact Number:
Processing Method And Result: Delivery Address:
Delivery Date:
Warranty Record: Maintenance Date:
Delivery Date:
Model:
Cause Of Issue: Customer's Name:
Contact Number:
Processing Method And Result: Delivery Address:
Delivery Date:
Warranty Record: Maintenance Date:
Delivery Date:
Model:
Customer's Name:
Cause Of Issue:
Contact Number:
Processing Method And Result: Delivery Address:
6-1. Need to know about warranty
After the purchase of instruments to fill in the warranty card, and sent to the manufac-
turer or agents, warranty effect
From the date of invoice issued since the purchase of the machine is the company's prod-
uct quality problem host free warranty for one year
(Note: Warranty with purchase bill and warranty card; The scope of warranty here is limited
to the main engine of the instrument, excluding accessories and other consumable parts that
need to be replaced regularly).
After the warranty period, please contact the manufacturer directly to provide service
guarantee.
To repair this machine, please contact the customer service department or the distribu-
tor. Do not repair or unpack by yourself
The company does not guarantee.
6-2. service life
The warranty period of this instrument is 1 year. (Note: manual damage excepted)
Accessories are guaranteed for 3 months. (Note: manual damage excepted)
The continued use of the instrument beyond the service period shall be approved by the
engineer test and in the subsequent use The instrument shall be checked periodically by the
engineer.
Discarded instruments and accessories beyond the service life should be dealt with ac-
cording to the relevant local regulations
