Puducherry Technological University,

Puducherry –605014
(A Technological University of Government of Puducherry)

Curriculum and Syllabi

for
First Year B.Tech. Degree Programme
(Effec ve from Academic year 2024-25)

(Subject to the Approval of the Fourth Academic Council of Puducherry

Technological University)
 CURRICULUM AND SYLLABUS
The Curriculum of B.Tech. is designed to fulfil the Program Educational Objectives
(PEO) and the Program Outcomes (PO) listed below.
PROGRAM EDUCATIONAL OBJECTIVES (PEO)
To provide students with the necessary knowledge in basic sciences in general and Electrical
PEO1 and Electronics Engineering in particular so as to develop skills to understand Electrical and
Electronics Engineering systems.
To provide education and practical training to design, debug and improve reliability of
PEO2
Electrical and Electronics Engineering systems.
To impart in-depth knowledge to build competency and capability to analyze and provide
PE03
feasible solutions for real life problems in power, control and electronics industries.
To prepare and encourage students to succeed in leadership positions in industry and to
PE04
undertake research leading to scientific innovations for sustainable development
To promote student awareness for life-long learning and to inculcate sensitivity to
PEO5 professional ethics and codes of professional practices with a commitment to improve the
quality of life and environment.
PROGRAM OUTCOMES (PO)
Apply the knowledge of Basic sciences and Engineering Sciences to provide solutions for
PO1
complex engineering problems
Competency to identify, formulate review research literature and analyze complex
PO2
engineering problems pertaining to Electrical and Electronics Engineering.
Use research-based knowledge and research methods including design of experiments,
PO3 analysis and interpretation of data, and synthesis of the information to provide valid
conclusions
Develop innovative thinking to create, select, and apply appropriate techniques & resources
PO4 with the help of modern computational methods and tools for prediction and modeling of
complex engineering tasks.
Identify, formulate, review research literature, analyze complex engineering problems and
PO5 conduct original research leading to substantiated conclusions using first principles of
mathematics, natural sciences, and engineering sciences.
Confident and knowledgeable to take up responsible positions in industry with the ability to
PO6 work in a group as well as lead a team towards achieving technology enhancement and
economic growth.
PO7 Awareness of professional responsibility with sensitivity to ethical practices.
Communicate effectively so as to interact with the engineering community and society at
PO8 large. Able to comprehend and to write effective reports, design documentation,
presentations, and give and receive clear instructions.
Have broad knowledge of aiding technologies necessary to recommend competitive
PO9
engineering solutions in a global and societal context.
Realize the need for lifelong learning and attain good attitude to adopt to modern
PO10
managements practices in a changing global scenario.
Apply ethical principles and commit to professional ethics and responsibilities and norms of
PO11
the engineering practice.
Create industry ready engineers by building strong collaboration and partnerships with the
PO12 industry through joint research projects, and also include arrangements for faculty to take up
joint research collaboration, curriculum development and continuous education programmes.
 Semester-wise First Year Courses and Credits
Curriculum for First Year B.Tech. Degree Courses
Semester I

Group-I (EC1, EC2, ME1, ME2, MT1, CH1)

Periods
Course Code Course CCC Credits
L T P
3 weeks compulsory Induc on Program
MAUC101 Mathematics I BSC 3 1 4
XXUC1xx Professional Core I PCC 3 1 4
PHUC101 Physics BSC 3 3
MEUC101 Engineering Graphics ESC 1 4 3
HSUA101 English for Communication AEC 2 2
GEUS101 Basic Engineering Skills Laboratory - I SEC 1 4 3
GEUV101 NSS, Yoga and Health VAC 2 1
PHUC102 Physics Laboratory BSC 2 1
13 2 12 -
Total
27 21

Group-II (CS1, CS2, IT1, EE1, EI1, CE1, CE2)

Course Periods
Course CCC Credits
Code L T P
3 weeks compulsory Induc on Program
MAUC101 Mathematics I BSC 3 1 4
XXUC1xx Professional Core I PCC 3 1 4
CYUC101 Chemistry BSC 3 3
CSUC101 Programming for Problem Solving ESC 2 2
HSUA101 English for Communication AEC 2 2
GEUS102 Basic Engineering Skills Laboratory - II SEC 1 4 3
GEUV102 Essence of Indian Traditional Knowledge VAC 1 1
CYUC102 Chemistry Laboratory BSC 2 1
CSUC102 Computer Programming Laboratory ESC 2 1
15 2 8
Total
25 21

XX – Department Code
xx- serial number
 Semester II

Group-I (EC1, EC2, ME1, ME2, MT1, CH1)

Periods Credi
Course Code Course CCC*
L T P ts
MAUC102 Mathematics II BSC 3 1 4
XXUC1xx Professional Core II PCC 3 1 4
CYUC101 Chemistry BSC 3 3
CSUC101 Programming for Problem Solving ESC 2 2
HSUA101 Professional English AEC 2 2
GEUS102 Basic Engineering Skills Laboratory - II SEC 1 4 3
GEUV102 Essence of Indian Traditional Knowledge VAC 1 1
CYUC102 Chemistry Laboratory BSC 2 1
CSUC102 Computer Programming Laboratory ESC 2 1
15 2 8
Total
25 21

Group-II (CS1, CS2, IT1, EE1, EI1, CE1, CE2)

Course CCC Periods Credi

Course
Code * L T P ts
MAUC102 Mathematics II BSC 3 1 4
XXUC1xx Professional Core II PCC 3 1 4
PHUC101 Physics BSC 3 3
MEUC101 Engineering Graphics ESC 1 4 3
HSUA102 Professional English AEC 2 2
GEUS101 Basic Engineering Skills Laboratory - I SEC 1 4 3
GEUV101 NSS, Yoga and Health VAC 2 1
PHUC102 Physics Laboratory BSC 2 1
13 2 12
Total
27 21

Exit Option for the students who opt to exit after completion of first year of B.Tech
Programme and have secured a minimum of 42 credits will be awarded a UG certificate in a
discipline if, in addition they complete one vocational course of 4 credits during the summer
vacation of the first year
 Professional Core Courses:
Department of Civil Engineering:
1. CEUC101 Sustainable Environment
2. CEUC102 Fundamental of Civil and Safety Engineering
Department of Mechanical Engineering
1. MEUC102 Engineering Mechanics
2. MEUC103 Engineering Thermodynamics
Department of Electronics and Communication Engineering
1. ECUC101 Electronic Device and Circuits
2. ECUC102 Analog Communications
Department of Computer Science and Engineering
1. CSUC103 Fundamentals of Computer Organization
2. CSUC104 Software Engineering
Department of Electrical and Electronics Engineering
1. EEUC101 Elements of Electrical Engineering
2. EEUC102 Electronic Devices and Circuits
Department of Electronics and Instrumentation Engineering
1. EIUC101 Fundamentals of Instrumentation
2. EIUC102 Basics of Industrial Automation and Control
Department of Chemical Engineering
1. CHUC101 Basics of Chemical Engineering
2. CHUC102 Process Calculations
Department of Information Technology
1. ITUC101 Information Technology Essentials
2. ITUC102 Digital Logic Design
Department of Mechatronics Engineering
1. MTUC101 Basics of Mechatronics
2. MTUC102 Basics of Sensors and Measurements
 3 weeks compulsory Induction Program

Induction program for students to be offered right at the start of the first year. The Induction
program contains.
• Physical activity
• Creative Arts
• Universal Human Values
• Literary
• Proficiency Modules
• Lectures by Eminent People
• Visits to local Areas
• Familiarization to Dept./Branch & Innovations
Department : Mathematics Programme: B.Tech.
Semester : First Course Category Code: Semester Exam Type: TY
BSC
Periods / Week Credit Maximum Marks
Course Code Course Name
L T P C CA SE TM
MAUC101 Mathematics-I 3 1 - 4 40 60 100
Prerequisite: -
Apply differential calculus to notions of curvature, evolutes and utilize Beta
CO1
and Gamma functions to solve improper integrals.
Course Make use of mathematical tools in evaluating multiple integrals and their
Outcome CO2
applications.
CO3 Solve problems of first order differential equations of various types.
At the end of
Determine solution of higher order ODE and simultaneous differential
the course CO4
Students will equations.
be able to Estimate gradient, divergence, curl and use Gauss, Stokes and Green’s
CO5 theorem to simplify evaluation of integrals.

UNIT-I Differential Calculus Periods: 12

Curvature, radius of curvature, evolutes and involutes. Beta and Gamma functions and their
CO1
properties.
UNIT-II Multi variable calculus Periods: 12
Multiple Integrals, change of order of integration in double integrals, Applications: Plane areas
(double integration), Change of variables (Cartesian to polar), Double and triple integrations, CO2
Volumes by triple integration.
UNIT-III First order Ordinary Differential Equation Periods: 12
Exact equations, First order linear equations, Bernoulli’s equation, Equations not of first
degree, equations solvable for p, equations solvable for y, equations solvable for x - Clairaut’s CO3
type - simple applications, orthogonal trajectories, growth and decay.
UNIT-IV Higher Order Ordinary Differential Equation Periods: 12
Linear differential equations of higher order - with constant coefficients, the operator D,
Euler’s linear equation of higher order with variable coefficients, simultaneous linear CO4
differential equations.
UNIT-V Vector Calculus Periods: 12
Gradient, divergence and curl. Scalar line integrals, vector line integrals, scalar surface
integrals, vector surface integral, Theorems of Stokes and Gauss divergence (without proof). CO5
Simple applications involving cubes and rectangular parallelopipeds (only planar surface).
Lecture Periods: 45 Tutorial Periods: 15 Practical Periods:- 00 Total Periods: 60
Reference Books:
1. Veerarajan T, Engineering Mathematics I , McGraw-Hill Education(India) Private Limited, 2014
2. Veerarajan T, Engineering Mathematics II , McGraw-Hill Education(India) Private Limited, 2015
3.Venkataraman M.K., Engineering Mathematics, Vol. I&II, The National Publishing Company,
Chennai, 2008.
4.Erwin Kreyszig, Advanced Engineering Mathematics (9th Ed), John Wiley & Sons, New Delhi,
2011.
5.Ramana B.V., Higher Engineering Mathematics, Tata McGraw Hill New Delhi, Eleventh Reprint,
2018.
6.Bali N. and Goyal M., Advanced Engineering Mathematics, Laxmi Publications Pvt. Ltd., New
Delhi, 9thEdition, 2011.
CO – PO Mapping

PO PO PO PO PO PO PO PO PO PO1 PO1 PO1 PS PS PS

1 2 3 4 5 6 7 8 9 0 1 2 O1 O2 O3
CO 3 3 2
1
CO 3 3 2
2
CO 3 3 3
3
CO 3 3 3
4
CO 3 3 2
5
Score: 3 – High; 2 – Medium; 1 – Low
 Programme : B. Tech.
Department : Mathematics
Semester : Second Course Category Code: Semester Exam Type: TY
BSC
Periods / Week Credit Maximum Marks
Course Code Course Name
L T P C CA SE TM
MAUC102 Mathematics-II 3 1 - 4 40 60 100
Prerequisite: -
Define and explain the basic concepts of Matrices and make use of it to
CO1
solve system of equations.
Course Analyze the continuous and discrete functions in terms of Fourier series
Outcome CO2
expansion.
Explain the concept of Fourier Transform and make use of it to evaluate
At the end of CO3
Integrals.
the course
Students will CO4 To develop an understanding of the standard techniques of complex
be able to variable theory in particular analytic function and its mapping property.
Explain the concepts of complex integration techniques and contour
CO5
integration techniques which can be used in real integrals.
UNIT-I Matrices Periods: 12
Inverse and rank of a matrix, System of linear equations, Symmetric, Skew Symmetric and
Orthogonal matrices, Eigenvalues and Eigenvectors of a real matrix, Characteristic equation, CO1
Cayley-Hamilton Theorem (statement only), Diagonalization of matrices.
UNIT-II Fourier Series Periods: 12
Dirichlet’s conditions - Expansion of periodic functions into Fourier series- Change of
interval- Half-range Fourier series. Complex form of Fourier series - Root mean square value CO2
- Parseval’s theorem on Fourier coefficients - Harmonic analysis.
UNIT-III Fourier Transform Periods: 12
Fourier transform, Inverse Fourier transform, definition and properties - Evaluation of
integrals- Fourier cosine and sine transform, definitions and evaluation of integrals using CO3
cosine and sine transforms.
UNIT-IV Complex Valued function and Conformal Periods: 12
Mapping
Definition of a Complex valued function f(z) and its derivative - Analytic functions -
Necessary condition for a function f(z) to be analytic (in Cartesian) - Cauchy-Riemann
equation - statement of C-R equation in polar form -sufficient condition for f(z) to be
analytic(statement only)- harmonic function- Harmonic and orthogonal properties of analytic CO4
function – Construction of analytic functions. Conformal mapping – Simple and standard
transformations like w = z+c, cz, sinz, cosz, 1/z, Bilinear transformation (excluding Schwarz-
Christoffel transformation).
UNIT-V Complex Integration Periods:12
Cauchy’s Integral theorem, Taylor’s and Laurent’s theorem (without proof), Classification of
singularities. Residues and evaluation of residues – Cauchy’s Residue theorem, Contour
CO5
integration – Evaluation of real integrals – unit circle and semi-circular contour (excluding
poles on boundaries).
Lecture Periods: 45 Tutorial Practical Periods: 00 Total Periods: 60
Periods: 15
Reference Books:
1. Veerarajan T., Engineering Mathematics II , McGraw-Hill Education(India) Private Limited, 2018
 2. Veerarajan T., Transforms and Partial Differential Equations , McGraw-Hill Education(India)
Private
Limited, 2016
3. Venkataraman M.K., Engineering Mathematics, Vol. II and III, The National Publishing Company,
2008.
4. Erwin Kreyszig, Advanced Engineering Mathematics (Ninth Edition), John Wiley & Sons, New
Delhi, 2011
5. Ramana B.V., Higher Engineering Mathematics, Tata McGraw Hill New Delhi, Eleventh Reprint,
2018.
6. Bali N. and Goyal M., Advanced Engineering Mathematics, Laxmi Publications Pvt. Ltd., New
Delhi, Ninth Edition, 2011.

CO – PO Mapping

PO PO PO PO PO PO PO PO PO PO1 PO1 PO1 PS PS PS

1 2 3 4 5 6 7 8 9 0 1 2 O1 O2 O3
CO 3 3 2
1
CO 3 3 2
2
CO 3 3 2
3
CO 3 3 2
4
CO 3 3 2
5
Score: 3 – High; 2 – Medium; 1 – Low
Department : Physics Programme: B. Tech.
Semester : First/Second Course Category Code: BSC Semester Exam Type: TY
Periods / Week Credit Maximum Marks
Course Code Course Name
L T P C CA SE TM
PHUC101 Physics 3 – – 3 40 60 100
Prerequisite: NIL
Course CO1 Recall and Illustrate the basic concepts of physics in various fields like electromagne sm,
Outcomes: dielectric, ultrasonic & acous cs, ma er waves, op cs and lasers.
CO2 Develop the skills to analyse and solve the problems related to field theory of electricity
At the end of and magne sm, mechanism of polariza on, wave equa on, Sabine’s formula, absorp on
the course, coefficient, op cal phenomena and laser ac ons.
the students CO3 Interpret the basic concepts of electrosta cs and magnetosta cs, types of polariza on,
should be
ultrasonic techniques, me dependent and independent Schrödinger wave equa ons,
able to
resolving power of prism/gra ng and types of lasers.
CO4 Assess the acquired informa on in the respec ve topics like electromagne sm,
dielectric, ultrasonic & acous cs, ma er waves, op cs and lasers.
CO5 Compile the basic physics laws and principles in the respec ve field for different
applica ons.
UNIT-I Electromagne c Theory Periods: 09
Electrosta c field – Electric poten al – Divergence of Electrosta c Field – Gauss Law and its applica ons -
Field due to spherical charge distribu on. CO1-
Biot-Savart Law – Divergence and Curl of Sta c Magne c Field – Ampere’s Circuital Law in Differen al CO5
form – Magne c Vector Poten al, Applica ons.

UNIT-II Dielectrics Periods: 09

Dielectric Polariza on and its Mechanisms – Dielectric Loss – Dielectric Breakdown – Calcula on of
Electronic and Ionic Polarizabili es – Temperature and Frequency Dependence of Polariza on – Internal CO1-
field in Solids – Claussius-Mosso Rela on. CO5

UNIT-III Ultrasonics and Acous cs Periods: 09

Ultrasonics: Piezo-electric Effect – Piezo-electric Generator – Magnetostric on Effect– Magnetostric on
oscillator – Industrial Applica ons of Ultrasonics. CO1-
Acous cs: Reverbera on me – Sabine’s formula – Determina on of Absorp on co-efficient. CO5

UNIT-IV Quantum Mechanics Periods: 09

Ma er Waves – de Broglie hypothesis – Uncertainty Principle – Schrödinger wave equa ons – me
dependent – me independent – Physical Significance of Wave Func on – Applica on to Par cle in a
CO1-
one-dimensional Poten al Box – Concept of Quantum Mechanical Tunnelling (without deriva on) –
CO4
Applica ons of Tunneling (qualita ve).

UNIT-V Op cs and Lasers Periods: 09

Interference: Air-wedge – Newton’s rings – Michelson’s interferometer – Determina on of Wavelength
of a Monochroma c Light Source.
Diffrac on: Rayleigh’s criterion – resolving power of gra ng and prism. CO1-
Lasers: Principles of laser – Spontaneous and S mulated emissions – Einstein’s theory of Ma er CO5
Radia on interac on – A and B coefficients – Types of Lasers – GaAs laser.

Lecture Periods: 45 Tutorial Periods: – Prac cal Periods: – Total Periods: 45

Text Books:
 1. V. Rajendran, Engineering Physics, 2nd Edi on, TMH, New Delhi 2011.
2. Avadhanulu M. N., Engineering Physics, S. Chand & Co., 2007.

Reference Books:
1. David Griffiths, Introduc on to Electrodynamics, 3rd Edi on, Eastern Economy Edi on, 2011.
2. D. J. Griffiths, Quantum mechanics, Pearson Educa on, 2014.
3. A.S. Vasudeva, Modern Engineering Physics, S. Chand & Co., 2006.
4. David Halliday, Robert Resnick and Jearl Walker, Fundamentals of Physics, Willey publica ons,
2013.
5. H. J. Pain, The physics of vibra ons and waves, Wiley publica ons, 2005.
6. Ajoy Ghatak, Op cs, 5th Edi on TMH, New Delhi, 2012.
7. K. Thyagarajan and Ajoy Ghatak, Lasers Fundamentals and Applica ons, 2nd Edi on, Springer
2010.
8. Avadhanulu M. N., P. G. Kshirsagar, A text book of Engineering Physics, Radiant publishers,
2017.

CO-PO Mapping
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 3 2 2 2 – – – – – – – 2
CO2 3 3 2 2 – – – – – – – –
CO3 3 2 3 2 – – – – – – – –
CO4 3 2 2 2 1 – – – – – – –
CO5 3 2 1 1 1 – – – – – – 2
Score: 3 – High; 2 – Medium; 1 – Low
Department : Physics Programme: B.Tech.
Semester : First/Second Course Category Code: Semester Exam Type: Prac cal
BSC
Periods / Week Credit Maximum Marks
Course Code Course Name
L T P C CA SE TM
PHUC102 Physics Laboratory – – 2 1 40 60 100
Prerequisite: NIL
Course CO1 Recall the physical parameters related to Physics theory.
Outcomes:
CO2 Extend the concepts and execu ng the experimental setup.
At the end of
the course, CO3 Experiments with op cs, thermal and electrical conduc vity, magne c field and laser.
the students
CO4 Analyse and interpret the results through calcula ons.
should be
able to CO5 Conclude the experimental findings.
Choice of any 10 experiments from the following
1. Radius of curvature of lens – Newton’s Ring
2. Thickness of an object – Air wedge
3. Resolving power of Prism – Spectrometer
4. Resolving power of Gra ng – Spectrometer
5. Specific rotatory power – Lorentz’s half shade polarimeter
CO1-CO5
6. Wavelength of laser source using gra ng and determina on of par cle size
7. Determina on of numerical aperture & acceptance angle of an op cal fiber
8. Wavelength of laser beam – Michelson’s interferometer
9. Coefficient of thermal conduc vity – Lee’s disc method
10. Coefficient of thermal conduc vity – Radial flow method
11. Electrical conduc vity of semiconductor – Two probe method
12. Field along the axis of a coil carrying current
13. Magne c dipole moment – Deflec on magnetometer
CO1-CO5
14. Young’s modulus – Uniform bending
15. Accelera on due to gravity – Compound pendulum

Lecture Periods: – Tutorial Periods: – Prac cal Periods: 30 Total Periods: 30

Reference Book:
1. Physics Laboratory manual prepared by Department of Physics, PTU

CO-PO Mapping
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 3 2 2 1 1 – – – – – – –
CO2 3 2 2 3 1 – – – – – – –
CO3 3 2 2 1 1 – – – – – – –
CO4 3 2 2 2 – – – – – – – –
CO5 3 1 1 2 2 – – – – – – –
Score: 3 – High; 2 – Medium; 1 – Low
 Department : Chemistry Programme : B.Tech
Semester : First/Second Course Category Code: BSC Semester Exam Type: TY
Periods / Week Credit Maximum Marks
Course Code Course
L T P C CA SE TM
CYUC101 Chemistry 3 - - 3 40 60 100
Prerequisite: -
After completion of the course, the students will be able to:
CO1 Explain the concepts of Water Chemistry in the context of industrial usage.
Course CO2 Discover the fundamental concepts of electrode potential in view of practical applications
Outcome CO3 Analyse chemical structures in terms of chemical bonding
CO4 Illustrate the organic reaction mechanisms with respect to the synthesis of drugs
CO5 Interpret the fundamental principle of spectroscopy and electrochemistry towards proper
applications
UNIT-I Water chemistry Periods: 9
Water chemistry-hard and soft water, Determination of hardness by EDTA method Disadvantages of hard
water- Boiler Scales, sludges, Softening of water: Internal conditioning, External conditioning - ion exchange CO1
and zeolite processes. Desalination-Reverse osmosis.
UNIT-II Electrochemical cells and corrosion Periods: 9

Electrode potential, electromotive force, reference electrodes-hydrogen, Ag/AgCl, calomel and glass
electrodes. Nernst equation and applications. Batteries- Dry cell, alkaline battery, Ni-Cd battery and lead- CO2
acid battery. Fuel Cell-Hydrogen-oxygen fuel cell. Corrosion-dry and wet corrosion, mechanism and types of
electrochemical corrosion. Corrosion control methods
UNIT-III Chemical bonding Periods: 9
Chemical bonding-valence bond theory, overlapping of orbitals. Hybridization in carbon compounds-sp, sp2
and sp3. Electron pair repulsion. Hybridization and shape of water and ammonia molecules. Molecular orbital
theory- combination of atomic orbitals. Bond order. Molecular orbital diagrams for homonuclear diatomic CO3
molecules- (hydrogen to neon). Factors influencing Chemical reaction - homolytic and heterolytic bond
fission. Reaction intermediates-carbonium ion, carbanion, free radicals and carbenes. Electrophiles and
nucleophiles
UNIT-IV Reaction mechanism Periods: 9
Mechanism of free radical substitution-chlorination of methane. Mechanism of electrophlic substitution-
bromination of benzene. Nucleophilic substitution-SN2-hydrolysis of methyl bromide, SN1-hydrolysis of t-
butyl bromide. Elimination reactions-E1 and E2. Addition reactions-nucleophilic and electrophilic. Synthesis CO4
of aspirin, paracetamol, sulfanilamide and chloroquine.
UNIT-V Analytical techniques Periods: 9
Absorption and emission of radiation. Beer-Lamberts law. Ultraviolet and visible spectroscopy-basic principles
and instrumentation. Conductivity-equivalent and molar conductance, cell constant. Conductometric
titration-types of conductometric titrations. Potentiometry-principle of acid base titration. CO5
Chromatography- Principles and instrumentation of gas Chromatograph.
Lecture Periods: 45 Tutorial Periods: - Practical Periods: - Total Periods: 45
Reference Books
1. P.C. Jain and Monika Jain, Engineering Chemistry, Dhanpat Rai Publishing Company, New Delhi, 17 ED, (2020-21).
th
2. Arun Bahl, B.S. Bahl and G.D. Tuli, Essentials of Physical Chemistry, S. Chand and Company Ltd, New Delhi, 28 ED,
2020.
nd
3. Arun Bahl and B.S. Bahl, A Text Book of Organic Chemistry, S. Chand and Company Ltd, New Delhi, 22 ED, 2016.
4. G.R. Chatwal and S.K. Anand, Instrumental Methods of Chemical Analysis, Himalaya Publishing House Pvt Ltd, New
Delhi, 2011.
th
5. D.A. Skoog, F.J. Holler and T.A. Nieman, Principles of Instrumental Analysis, Thomson Asia Pvt. Ltd, Singapore, 5
ED, 2005.
 CO-PO Mapping
PO1
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO11 PO12
0
CO1 3 3 2

CO2 3 3 2

CO3 3 3 -

CO4 3 3 -

CO5 3 3 2

Average 3 3 2
 Department : Chemistry Programme : B.Tech.
Semester : First/Second Course Category Code: BSC Semester Exam Type: LB
Periods / Week Credit Maximum Marks
Course Code Course
L T P C CA SE TM
CYUC102 Chemistry Laboratory - - 2 1 40 60 100
Prerequisite -
After completion of the course, the students will be able to:
CO1 Determine the rate constants and order of chemical reactions.
Examine the molecular/system proper es such as hardness of water and adsorp on.
Course CO2
Outcome CO3 Test for the quality parameters by Titrimetry methods.

CO4 Es mate the quality parameters by conductometry and poten ometry.

CO5 Analyse the inorganic salt in terms of appropriate ca ons and anions

Choice of 10-12 experiments from the following:

1. Kinetic study of acid hydrolysis of ethyl acetate
CO1
2. Total hardness of water - Determination by EDTA method
3. Freundlich adsorption isotherm - Adsorption of acetic acid on charcoal
CO2
4. Chloride content of water - Determination by Mohr’s method
5. Determination of oxalic acid by permanganometry
6. Determination of ferrous by permanganometry
7. Determination of carbonate and bicarbonate in a mixture
8. Beer-Lamberts law - Determination of ferrous by colorimetry CO3
9. Magnesium content in water - Determination by EDTA method
10. Acetic acid content in vinegar
11. Dissolved oxygen content in water - Determination by Winkler’s method.
12. Determination of available chlorine in bleaching powder.
13. Conductometric titration
14. Potentiometric titration CO4
15. Chemical analysis of salt for cations and anions
CO5
Lecture Periods: Tutorial Periods: - Practical Periods: 30 Total Periods: 30
Reference Books
1. Lab Manual, Department of Chemistry, Puducherry Technological University, Puducherry, 2018.
2. V. Venkateswaran, R. Veeraswamy and A.R. Kulandaivelu, Basic Principles of Practical Chemistry, Sultan Chand &
Sons, New Delhi, 2012
3. J. Mendham, R.C. Denney, J.D. Barnes and M. Thomas, Vogel’s Text Book of Quan ta ve Chemical
Analysis, PearsonEduca on, New Delhi, 6th ED, 2009.
 CO-PO Mapping
PO1
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO11 PO12
0
CO1 3 3 2

CO2 3 3 2

CO3 3 3 2

CO4 3 3 2

CO5 3 3 2

Average 3 3 2
 Course Semester Exam Type: TY
Semester : First Category:
AEC
Hours / Credit Maximum Marks
Course Code Course Name Week
L T P C CA SE TM
English for
HSUA101 2 - - 2 40 60 100
Communication
Prerequisite Basic English
CO1 Apply various strategies to foster good communication skills.
CO2 Analyse reading comprehension passages.
At the end of the course, CO3 Construct effective sentences in English thereby improving the
students will be able to writing skills.
Demonstrate effective speaking skills through clear and coherent
CO4
articulation.
CO5 Develop the grammatical structures for effective communication.
UNIT-I ART OF COMMUNICATION Hours: 06
Definition - Importance - Process- Types- – Barriers- Strategies to become good
communicators
CO1,CO4
UNIT-II READING COMPREHENSON Hours: 06
Intensive and Extensive Reading- predicting the content- skimming the text- identifying
CO2
the topic sentence- guessing the meaning of words from context- scanning- summarizing.
UNIT-III PRACTICE IN WRITING Hours: 06
Coherence and Clarity in Writing – Principles of Paragraph writing- Essay writing-
Describing – Defining – classifying. CO3,CO5

UNIT-IV SPEAKING PRACTICE Hours: 06

Importance of Pronunciation –– Short conversations and Dialogues – role plays- extempore
speaking. CO4,CO1
UNIT-V BASICS OF GRAMMAR Hours: 06
Articles – Voice – Preposition– Importance of punctuation- Subject-Verb Agreement-Error
CO5,CO3
detection - Synonyms, Antonyms- Acronyms.
Lecture Periods: 30 Tutorial Periods: - Practical Total Periods: 30
Periods:
-
Reference Books:
1. Sudarshana, N.P and C. Savitha. English for Technical Communication. Noida: CUP, 2016.
2. Shoba, K N and Lourdes Joavani Rayen. Communicative English. Chennai: CUP, 2017.
3. Rizvi, Ashraf, M. Effective Technical Communication. New Delhi: McGraw, 2017.
4. Michael Swan. Practical English Usage. Oxford: OUP,2014
5. Dignen, B. Fifty Ways to Improve your Presentation Skills in English. Orient Blackswan, 2014.
6. Dutt, Kiranmai P and Geetha Rajeevan. Basic Communication Skills. New Delhi: CUP, 2013.
7. Mohan, Krishna and Meera Banerji. Developing Communication Skills. Delhi: Macmillan,
2012.
 CO-PO Mapping

CO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 - - - - - - - - - 2 - -

CO2 - 1 - - - - - - - 2 - -

CO3 - - - - - - - - - 2 - -

CO4 - - - - - - - - 2 2 1 -

CO5 - - - - - - - - - 2 - -
Department : HSS Programme: B.Tech.
Semester : Second Course Category Code: Semester Exam Type: TY
AEC
Periods / Week Credit Maximum Marks
HSUA102 PROFESSIONAL ENGLISH
L T P C CA SE TM
Prerequisite Basic English 2 - - 2 40 60 100
CO1 Enhance the professional communication skills.
At the end of
CO2 Listen effectively in various contexts and become good communicators
the course,
students will CO3 Write effectively with clarity.
be able to CO4 Interpret reading materials, thereby improving comprehension skills
CO5 Develop good vocabulary skills
UNIT-I PROFESSIONAL COMMUNICATION Periods: 06
Clarity and effectiveness in communication – aspects of body language (proxemics, kinesics,
CO1,
haptics, chronemics) – paralanguage - feedback in communication.
CO2
UNIT-II LISTENING AND SPEAKING Periods: 06
Importance of Listening – Types - Hearing vs Listening - Steps involved in listening- Barriers to
listening- Presentation skills – Group Discussion CO2

UNIT-III WRITING Periods: `06

Formal and informal writing – Sentence construction –Use of phrases and clauses in sentences-
Resume writing - Agenda and Minutes of a meeting- E-mail writing. CO3,CO4

UNIT-IV READING STRATEGIES Periods: 06

Reading different kinds of texts- active and passive reading- SQ3R Reading technique – drawing
CO1,
inferences and conclusions- critical reading.
CO4
UNIT-V VOCABULARY BUILDING Periods: 06
Word formation- préfixes and Suffixes- Homophones and homonyms- Words often confused-
sentence completion. CO5

Lecture Periods: 30 Tutorial Periods: - Practical Periods:- Total Periods: 30

Reference Books:
1. Bikram, K. Das. Functional Grammar and Spoken and Written Communication in English. Orient Black swan,
2018.
2. K.N. Shoba and Lourdes Joavani Rayen. Communicative English: A Workbook. Cambridge University Press,
2018.
3. Mohan Das, N. K. Writing Today. Orient Blackswan, 2016.
4. E. Suresh Kumar, P. Sreehari, J. Savithri. Essential English. Orient Blackswan, 2015.
5. Alvinder, Dhillon and Parmod Kumar Singla. Textbook of English and Communication Skills-1. Abhishek
Publications, 2017.
6. Barun K. Mitra. Personality Development and Soft Skills. Oxford University Press, 2017.
CO-PO Mapping

CO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 - - - - - - - - 1 2 - -

CO2 - - - - - - - - - 2 1 1

CO3 - - - - - - - - - 2 - -

CO4 - - - - - - - - - 2 - -

CO5 - - - - - - - - - 2 - -
Department :HSS Programme: B.Tech.
Semester : I/II Course Category Code: Semester Exam Type:
VAC
Periods / Week Credit Maximum Marks
GEUV101 NSS, Yoga and Health
L T P C CA SE TM
- 2 1 100 - 100
Prerequisite: NIL
Course Understand the Foundations and Practices of Community Service and Holistic Well-
Outcome: CO1
being:
CO2 Engage in Fitness Activities for Personal Development and Physical Fitness
At the end of
CO3 Cultivate Competence in Sports Training Principles and Injury Prevention
the course
students will CO4 Promote Health Education and Community Engagement
be able to
UNIT-I NSS Periods: 06
Introduction to NSS History, philosophy, aim and objectives of NSS.Organization of NSS, funding,
regular activities, special camping, adopted village, maintain records, collaboration government, agencies CO1,
NGOs, NSS Moto, NSS logo, NSS day.NSS Community service; CO4

UNIT-II Yoga Periods: 06

Definition of yoga,– Classifications of yoga - Mudras. – Importance of meditation – Mental wave
frequency –Assanas from Common Yoga Portal - breathing practices – pranayama-. Relaxation-
Simplified Yoga - Knowing the relation among self, nature and society - Analysis of Thoughts CO1,
Moralisation of Desire - Neutralisation of Anger - Eradication of Worries - Realisation of Self - CO2
Harmony in Life

UNIT-III Health Periods: 06

Components of health & wellness-. Relationship between health and physical activity-. Factors affecting
health -. Diet and nutrition for health - Essential components of balanced diet - Role of nutrients for
healthy life -Introduction to AYUSH- concepts of alkaline and acidic food, Healthy Habits to be CO3,
followed day to day life CO4

UNIT-IV Fitness Periods: 06

Fitness activities - types of fitness activities- outdoor activities - basic movement pattern- CO2,
Indoor activity -. Aerobics / dance fitness- resistance training for fitness benefits of physical fitness – CO3
development of physical fitness.

UNIT-V Sports Periods:06

Meaning, Definition Sports Training – Meaning and Significance of Warming Up and Warming Down –
Types of Warming Up. Principles of Sports Training and Conditioning – Fist Aids CO2,
CO4,
Lecture Periods: 0 Tutorial Periods: 0 Practical Periods:-30 Total Periods: 30

Reference Books:
1. NSS Manual 2016, Ministry of sports and youth affairs, GOI,
2. Yoga for Moden Age by Vethathiri Maharishi, Vethathiri Publication,
3. Health & Wellness, Yoga Education, Sports & Fitness- A Complete Guide By Prof. Arulnidhi Suraj,
M.A.(Yoga), Ph.D. ,Dr. G. Dhanalakshmy,, 2024, SURAJ PUBLICATIONS Puducherry
4. Deck, Frank W, “Sports Training and Principles” London Lepus Books, 1980.
5. Fox, Edward L, “Sports Physiology” Halt CBS College Publishing, 1984.
6. Singh, Hardayal, “Science of Sports Training” New Delhi: DVS Publications, 1991.
7. Shaver, Larry G, “Essential of Exercise Physiology of Sports and Exercise” Champaign. Human
Kinetics, 1982.
8. Physical Activity and Health by Claude Bouchard, Steven N. Blair, William L. Haskell. 2. Mental Health
workbook by Emily Attached &MarziaFernadez, 2021.

CO-PO Mapping

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 - - 3 - - 2 - - - - - 1
CO2 - - 3 - - 2 - - - - - 1
CO3 - - 3 - - 2 - - - - - 1
CO4 - - 3 - - 2 - - - - - 1
 Department : Humanities and Social Sciences Programme: B.Tech.
Subject Category: Semester Exam Type: -
Semester : First/Second
VAC
Period/Week Credit Maximum Marks
Course Code Course Name
L T P C CA SE TM
Essence of Indian Traditional 1 - - 1 100 - 100
GEUV102
Knowledge
Prerequisite -
The course will enable the student to:
To understand the importance of Yoga for health care and explain basics of
CO1 Indian traditional knowledge in modern scientific perspective.
Course
Outcome Analyze the relation between orthodox and Heterodox Indian philosophical
CO2 tradition.

Interpret the effect of traditional knowledge from linguistic and artistic

CO3 perspectives.
UNIT-I Periods: 5
Basic structure of Indian knowledge system, Modern science and Indian knowledge system,
CO1
Yoga and holistic health care.
UNIT-II Periods: 5
Indian philosophical tradition, Orthodox (Hindu school), Heterodox (Non-Hindu schools). CO2
UNIT-III Periods: 5
Indian linguistic tradition and Indian artistic tradition. CO3
Lecture Periods: 15 Tutorial Periods: - Practical Periods: - Total Periods: 15
Reference Books:
1. N. Sivaramakrishnan (Ed.) Cultural Heritage of India – Course Material, Bharatiya Vidya
Bhavan, Mumbai 5th edition, 2014.
2. Swami Jitatmanand, Modern Physics and Vedanta, Bharatiya Vidya Bhavan.
3. Yoga Sutra of Patanjali, Ramakrishna Mission, Kolkatta.
4. R.N. Jha, Science of Consciousness Psychotherapy and yoga Practices, Vidyanidhi Prakashan,
Delhi 2016.
5. S.C Chaterjee and D.M Datta, An Introduction to Indian Philosophy, University of Calcutta,
1984. 7. Krishna Chaitanya, Arts of India, Abhinav Publications, 1987.
CO – PO Mapping

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 3 3 2 2
CO2 2 3 2
CO3 2 3 2
Score: 3 – High; 2 – Medium; 1 – Low
 Department : Civil Engineering Programme : B.Tech
Semester : First Course Category Code: PCC Semester Exam Type: TY
Periods / Week Credit Maximum Marks
Course Code Course
L T P C CA SE TM
CEUC101 Sustainable Environment 3 - - 3 40 60 100
Prerequisite -
CO1 Able to gain comprehensive understanding of Environment and Natural Resources.
Able to grasp the foundational principles of Ecology, including ecological systems and the
CO2
study of living organisms.
Capable of addressing various forms of environmental pollution, including Air, Water, Soil,
CO3
and Noise pollution.
Course Outcome
CO4 Able to comprehend solid waste management technologies and associated challenges.
Able to understand the resources and energy management practices that prioritize
CO5
environmental sustainability and contribute to humanity's sustainable development.
Capable of actively participating in societal green initiatives, such as energy conservation.
UNIT – 1 Introduction to Environment and Natural Resources Periods: 9
Introduction to environmental studies-Definition, scope and importance, Water resources- Water Cycle, CO1
Environmental Segments, Forest resources, Mineral resources, Food resources, Land resources, Energy resources,
Conservation of Natural resources.

UNIT – 2 Ecosystem and Bio Diversity Periods: 9

Ecosystem-types, Structure and function of Ecosystem, Food chain and Food web, Bio Diversity – Levels of Bio
diversity, Types of bio diversity, Hotspot of bio diversity, Conservation of bio diversity-Threats to biodiversity- CO2
need for public awareness.
UNIT – 3 Environmental Pollution Periods: 9
CO3
Environmental pollution-Definition,causes,effects,and control measures of Air pollution, Water pollution- , Soil
Pollution Marine pollution and Noise Pollution.
UNIT– 4 Solid Waste and water Management Periods: 9
Solid Waste management – Causes- effects, types and control measures of Urban and industrial waste, E- CO4
waste, plastic waste, Biomedical, waste water conservation-recycling and reuse, rainwater harvesting and
water shed management.
Social Environment and Sustainable Development
C

UNIT– 5 Periods: 9
Environmental Ethics, Human population and Environment, Climate Changes, Public Awareness, Value
Education, Role of NGOs in the protection of environment , Role of National Green Tribunal, Green energy, CO5
Future trends for sustainable development.
Lecture Periods: 45 Tutorial Periods: - Practical Periods: - Total hours: 45
Reference Books:
1. P.Yugananth, R.Kumaravelan, Environmental Science and Engineering, Scitech Publications (Inida) P.Ltd., Delhi,
2017.
2. John Pichtel, Waste Management Practices: Municipal, Hazardous and Industrial, CRC Press,2014
3. V.S.K.V.Harish, Arunkumar, Green Building Energy Simulation and Modeling, Elsevier Science & Technology,2018
4. Anubha Kaushik and C.P.Kaushik, Environmental Science and Engineering, New Age International (P) Ltd., New
Delhi, 2010.
5. S.S.Dara, A text book of Environmental Chemistry and Pollution Control, S.Chand and Company Ltd., New Delhi,
2014.
6. IS:15797:2008, Roof Top Rainwater Harvesting-Guidelines, BIS, New Delhi
7. Energy Conservation Building Code, 2017, Bureau of Energy Efficiency, Ministry of Power, Government of India.
 CO – PO Mapping

PO PO PO PO PO PO PO PO PO PO1 PO1 PO1 PSO PSO PSO

1 2 3 4 5 6 7 8 9 0 1 2 1 2 3
CO
3 3 - - - - - - - - - - - - -
1
CO
3 3 2 - - - - - - - - - - - -
2
CO
3 3 - - - - - - - - - - - - -
3
CO
3 3 2 - - - - - - - - - - - -
4
CO
- - - - - 3 3 2 - - - - - - -
5
Score: 3 – High; 2 – Medium; 1 – Low
Department : Civil Engineering Programme: B.Tech. (CE)
Semester : Course Category Code: Semester Exam Type: TY
Course Code Course Name Periods / Week Credit Maximum Marks
L T P C CA SE TM
CEUC102 Fundamental of Civil and
Safety Engineering 3 1 0 4 40 60 100

Prerequisite: -
CO1 The role of civil engineer in society and to relate the various disciplines of Civil
Engineering, NBC Code and Building Area.
CO2 Able to understand the building components and knowledge roads, bridges and
loads.
Course
CO3 Able to understand of details plan, section elevation and loads on structure.
Outcome
CO4 Able to understand of safety practise in buildings & IS codes.
CO5 Able to understand the safety rules and remedial measures.

UNIT-I OVERVIEW OF CIVIL ENGINEERING Periods: 12

Civil Engineering contributions to the welfare of Society – Specialized sub disciplines in CO1
Civil Engineering – National building code (NBC) – terminologists: Plinth area, Carpet
area, Floor area, Build up area, Floor space index – Types of buildings as per NBC.
UNIT-II BUILDING COMPONENTS AND Periods: 12
INFRASTRUCTURE
Building plans – Setting out of a Building – Foundations: Types of foundations – Bearing
capacity and settlement – Brick masonry – Stone Masonry – Beams – Columns – Lintels –
Roofing – Flooring – Plastering. Types of Bridges and Dams – Roads-types, Water bound CO2
macadam road, cement concrete road, bituminous road.
UNIT-III ELEMENTS OF BUILDING CONSTRUCTION Periods: 12
Planning: General Requirement of Building-Elementary principles and basic requirements
of a building Planning-Importance of Planning - Layout of residential & industrial
buildings, Introduction to Plan - Elevation & Section of Residential Building.
CO3
Construction: Types of Structures -Types Loads acting on the structure - Elements of
building drawing - Introduction to building byelaws - Section of Wall through Door &
Window
UNIT-IV CONSTRUCTION SAFETY & QUALITY Periods: 12
MANAGEMENT
Construction safety: – Basic principles of safety – Major causes of accidents at project site
– Effects of accidents – Safety practices at construction site – Precautions in handling
hazardous materials – Occupational hazard – Role of supervisor/ Engineer in ensuring CO4
safety at construction site – Safety legislations.
Quality management: – Quality concepts – Basic TQM concepts – Elements of TQM -
Quality standards – BIS v/s ISO – Various ISO standards related to construction – Merits
and demerits of ISO standardization.
UNIT-V SAFETY RULES AND ECONOMY Periods: 12
Important Safety Rules: Accident Reporting - Storage of Materials - Atmosphere in
Confined Place - Prevention from Drowning - Fire Prevention and Protection - First Aid CO5
and Medical Care - Personal Protective Equipment.

Safety and Economy: Direct Costs of Accidents - Indirect Cost of Accidents - Cost of
Safety Programs - Safety Cost Optimization
Lecture Periods: 45 Tutorial Periods: 15 Practical Periods: Total Periods: 60
Reference Books:

1. Basic Civil engineering, Gopi, S., Pearson Publication

2. Basic Civil Engineering, Bhavikatti, S. S., New Age
3. National Building Code Of India 2005
4. Mishra. R.K., Construction Safety, Aitbs Publishers, 2012.
5. Jimmy W. Hinze, Construction Safety, Prentice Hall Inc., 1997
6. Bhattacharjee. S.K., Safety Management in Construction Principles & Practice,Khanna Publishers, 2011.
7. Hand Book on Construction Safety Practices, SP:70, BIS, 2001.
8. Muraleedharan Pillai.K, Construction Safety Hand Book, Sujatha Publishers, 2012.

CO-PO Mapping

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2 PSO3

CO1
3 3 - - - - - - - - - - - - -
CO2
3 3 2 - - - - - - - - - - - -
CO3
3 - 3 - - - - - - - - - - - -
CO4
- - - - - - 3 - 3 - - - - - -
CO5
- - - - - 3 - - 3 - - 2 - - -
Score: 3 – High; 2 – Medium; 1 – Low
Department : Mechanical Engineering Programme : B.Tech.
Semester : First/Second Course Category Code: Semester Exam Type: TY
ESC
Course Periods/Week Credit Maximum Marks
Course Name
Code L T P C CA SE TM
MEUC101 Engineering Graphics 1 4 3 40 60 100
Prerequisite -
CO1 Properly dimension and annotate engineering drawings as per standards of
engineering drawing prac ce and understand simple projec on concept using
Course simple basic geometrical en es.
Outcome CO2 Prepare projec ons of simple regular solids at different posi on and
At the end orienta on.
of CO3 Draw projec ons of simple regular solids sec oned by sec oned plane
the course oriented in different angle. Also create development surface of simple and
students sec oned solids.
will CO4 Visualize and draw projec ons of two intersec ng simple regular solids and
be able to present the given 3D simple blocks in orthographic views.
CO5 Present the given orthographic views of simple blocks and combina on of
simple solids in 3D views
UNIT-I Periods: 15
ENGINEERING DRAWING STANDARDS
Introduc on-Standards for Engineering Drawing prac ce, Le ering, Line work and
Dimensioning, Orthographic projec on- principles-Principal planes-First angle projec on-
projec on of points.
PROJECTIONS OF STRAIGHT LINES AND PLANES CO1
Projec on of straight lines (only First angle projec ons) inclined to both the principal planes
Determina on of true lengths and true inclina ons by rota ng line method and traces.
Projec on of planes (polygonal and circular surfaces) inclined to both the principal planes
by rota ng object Method.
UNIT-II Periods: 15
PROJECTIONS OF SOLIDS
Projec ons of simple solids like prisms, pyramids, cylinder, cone and truncated solids when CO1,
the axis is inclined to one of the principal planes and parallel to the other by rota ng object CO2
method.
UNIT- Periods: 15
III
SECTIONS OF SOLIDS
Sec oning of simple regular solids in simple ver cal posi on when the cu ng plane is
inclined to one of the principal planes and perpendicular to the other — obtaining true CO1,
shape of sec on. CO2,
DEVELOPMENT OF SURFACES CO3
Development of lateral surfaces of simple and sec oned solids — Prisms, pyramids cylinders
and cones.
UNIT- Periods: 15
IV
INTERSECTION OF SOLIDS
Intersec on of solids and curves of intersec on – prism with cylinder, cylinder & cylinder,
cone and cylinder with normal intersec on of axes and with no offset. CO4
ISOMETRIC VIEW TO ORTHOGRAPHIC VIEWS
Conversion of isometric view of simple blocks to orthographic views
UNIT-V Periods: 15
ISOMETRIC PROJECTION CO1
Principles of isometric projec on — isometric scale — isometric projec ons of simple solids CO5
and truncated solids - Prisms, pyramids, cylinders, cones- combina on of two solid objects
in simple ver cal posi ons
CONVERSION OF ORTHOGRAPHIC VIEWS TO ISOMETRIC VIEW
Conversion of orthographic views of simple blocks to isometric view
Lecture Periods:15 Tutorial Periods: - Practical Periods: 60 Total Periods:75

Text Books
1. K.Venugopal, ‘Engineering Drawing + Auto CAD’, New Age Interna onal Publisher, 2011.
2. K.V. Natarajan, ‘A Text Book of Engineering Graphics’, Dhanalakshmi Publishers, 2018.
Reference Books
1. K.R. Gopalakrishna, ‘Engineering Drawing’ (Vol I &II), Subhas Publica ons, Bangalore, 2017.
2. Engineering drawing prac ce for schools & colleges SP 46:2003.
3. T. Jeyapoovan, ‘Engineering Graphics using AUTOCAD’, VIKAS Publishing House Pvt., 2015.
4. N.D. Bha and Panchal VM, ‘Engineering Drawing’, Charotar Publishing House, 2019.
5. C M Agrawal and Basant Agrawal, ‘Engineering Graphics’, McGraw Hill Edu. Publica on,2017
6. V.P Kumar, ‘Engineering Graphics’, Full Marks Pvt Ltd Publica ons, 2017

CO-PO Mapping

PO PO PO PO PO PO PO PO PO PO1 PO1 PO1 PSO PSO

1 2 3 4 5 6 7 8 9 0 1 2 1 2
CO 3 1 1 2 3 1 3 2
1
CO 3 1 2 3 1 3 2
2
CO 3 1 2 3 1 3 2
3
CO 3 1 2 3 1 3 2
4
CO 3 1 2 3 1 3 2
5
Score: 3-High; 2-Meium; 1-Low
Department : Mechanical Engineering Programme : B.Tech.
Course Category Code: Semester Exam Type: TY
Semester : First
PCC
Course Code Course Name Periods/Week Credit Maximum Marks
L T P C CA SE TM
MEUC102 Engineering Mechanics 3 1 0 4 40 60 100
Prerequisite
Interpret the vectorial and scalar representation of forces and moments, by
CO1
identifying the components and magnitude of each force and moment.
Course Analyze the equilibrium of rigid bodies, by applying the principles of statics
CO2
Outcome and calculating the forces and moments acting on a rigid body.
At the end Apply the laws of friction to determine the friction force and its effects on the
CO3
motion of a body, by using the relevant equations and formulas.
of
Evaluate the properties of surfaces and solids, by analyzing their physical and
the course
CO4 mechanical characteristics and determining their suitability for specific
students will
applications
be able to
Synthesize the knowledge of dynamic forces exerted on rigid bodies, by
CO5 applying the principles of dynamics and calculating the forces and moments
acting on a body in motion.
UNIT-I Periods: 12
STATICS OF PARTICLES
Introduc on – fundamental Laws of Mechanics – Vector opera ons of forces - dot
product, cross product – Coplanar Forces – rectangular components – Equilibrium of a CO1
par cle – Forces in space – Equilibrium of a par cle in space – Equivalent systems of
forces.
UNIT-II Periods: 12
EQUILIBRIUM OF RIGID BODIES
Types of supports –Ac on and reac on forces – Free body diagram - stable equilibrium
– Moments and Couples – Moment of a force about a point and about an axis –
CO1, CO2
Vectorial representa on of moments and couples – Scalar components of a moment –
Varignon’s theorem – Single equivalent force -Equilibrium of Rigid bodies in two
dimensions.
UNIT-III Periods: 12
FRICTION
CO1,
Fric on force – Laws of dry fric on – equilibrium analysis of simple systems – Wedges
CO2, CO3
and Screws – Screw Jack - Rolling resistance.
UNIT-IV Periods: 12
PROPERTIES OF SURFACES AND SOLIDS
Centroids and Centre of Gravity – Area moments of iner a of plane areas of two-
dimensional body – primi ve shapes - Parallel axis theorem and perpendicular axis CO4
theorem – Mass moment of iner a – for primi ve solids – Rela on between mass and
area moments of iner a - Principal axes and Principal moment of iner a.
UNIT-V Periods: 12
DYNAMICS OF PARTICLES
Displacements, Velocity and accelera on, their rela onship – Rela ve mo on – CO1,CO2,
Curvilinear mo on -Newton’s laws of mo on – Angular momentum – Impulse and CO5
Momentum - Impact of bodies.
Lecture Periods: 45 Tutorial Periods: 15 Practical Periods: 0 Total Periods: 60
TEXT BOOKS
1. Beer, F.P and Johnston Jr. E.R., “Vector Mechanics for Engineers (In SI Units): Sta cs and
Dynamics”, Published by McGraw-Hill Educa on, 2 Penn Plaza, New York, NY 10121. Copyright ©
2019 by McGraw-Hill Educa on.
2. S. Rajasekaran and G. Sankarasubramanian, “Engineering Mechanics, Sta cs and Dynamics, Vikas
Publishing House Pvt Ltd New Delhi- 110055,(2016)
REFERENCE BOOKS
1. Irving H. Shames and Krishna Mohana Rao. G., “Engineering Mechanics – Sta cs and
Dynamics”, 4th Edi on, Pearson Educa on 2006.
2. Meriam J.L. and Kraige L.G., “ Engineering Mechanics- Sta cs - Volume 1, Dynamics- Volume 2”,
Third Edi on, John Wiley & Sons,1993.
3. R. C. Hibbeler “Engineering Mechanics”, Copyright © 2017 by Pearson India Educa on Services Pvt
Ltd
4. Bhavika , S.S and Rajashekarappa, K.G., “Engineering Mechanics”, New Age Interna onal (P)
Limited Publishers, 1998.
5. Dr.R.K Bansal, “A Text Book of Engineering Mechanics”, Lakshmi Publica ons (P) Ltd, New
Delhi,2004

CO-PO Mapping

PO PO PO PO PO PO PO PO PO PO1 PO1 PO1 PSO PSO

1 2 3 4 5 6 7 8 9 0 1 2 1 2
CO 3 2 2 1
1
CO 3 3 2 1 1 1
2
CO 2 2 2 3 1
3
CO 2 2 1 1 2 1
4
CO 3 3 3 2 2 2
5
Score: 3-High; 2-Meium; 1-Low
Department : Mechanical Engineering Programme : B.Tech
Semester : Second Course Category Code: PCC Semester Exam Type: TY
Course Code Course Name Periods/week Credit Maximum Marks
Engineering L T P C CA SE TM
MEUC103
Thermodynamics 3 1 - 4 40 60 100
Prerequisite -
CO1 Define the laws of thermodynamics signifying energy interac ons.
Course
Demonstrate the applica on of laws of thermodynamics to problems involving energy
Outcome CO2
interac ons.
CO3 Solve problems by applying the principles of thermodynamics.
At the end of
the course Develop correla ons among the various func ons which are studied in
CO4
students will thermodynamics.
be able to Make use of data handbooks, charts, etc., for determining thermodynamic
CO5
proper es.
UNIT-I Periods: 12
INTRODUCTION AND ZEROTH LAW
Con nuum – microscopic and macroscopic approach – thermodynamic systems, property and
its types, process and its types, state – thermodynamic equilibrium – path and point func ons –
temperature and its measurement scales – zeroth law of thermodynamics – energy – stored CO1, CO2,
forms and transi onal forms of energy and their types – CO3
FIRST LAW OF THERMODYNAMICS
first law of thermodynamics applied to closed and open systems – steady and unsteady
processes – first law efficiency.
UNIT-II Periods: 12
SECOND LAW OF THERMODYNAMICS AND ENTROPY
Limita ons of first law of thermodynamics – heat engines – heat pumps – thermal reservoirs –
various statements of second law of thermodynamics – reversibility – Clausius inequality –
entropy – entropy change in processes – entropy genera on principle and its applica ons – CO1,
CO2,
entropy balance of closed and open systems.
CO3
EXERGY
Exergy – reversible work, useful work for closed and open systems – decrease of exergy in
processes – dead state – irreversibility – second law efficiency of thermal devices.
UNIT-III Periods: 12
GAS LAWS
Ideal and real gases – gas laws, various equa ons of state – law of corresponding states –
compressibility factor and charts. CO1,
PURE SUBSTANCES CO2,
CO3,
Mixture of gases – laws – property correla ons – entropy – Gibbs func on. CO5
Pure substances – phase change process – dryness frac on – property tables – 2D and 3D
charts – Mollier diagram.
UNIT-IV Periods: 12
THERMODYNAMIC PROPERTIES
Thermodynamic proper es correla ons – Maxwell’s correla ons – Tds equa ons – inversion
temperature – Joule Kelvin effect – Clausius Clapeyron equa on. CO4,
PSYCHROMETRY CO5
Psychrometry – air and water vapour mixture – property tables and charts – adiaba c
satura on temperature – psychrometric processes.
UNIT-V Periods: 12
 COMBUSTION
Combus on – Stoichiometry – air/fuel ra o – enthalpy of forma on – enthalpy of combus on
–first law of thermodynamics applied to combus on – hea ng values. CO2,
COMPRESSIBLE FLOW CO5
Compressible flow – stagna on states – Mach number – rela ons for stagna on fluid
proper es – isentropic flows through nozzles.
Lecture Periods: 45 Tutorial Periods: 15 Prac cal Periods: - Total Periods: 60
TEXT BOOK
1. Nag.P.K., “Engineering Thermodynamics”, 6th Edi on, McGraw Hill India, New Delhi, 2017.
REFERENCE BOOKS
1. Yunus A. Cengel, Michael A. Boles, Mehmet Kanoglu “Thermodynamics - An Engineering Approach”, 9th
edi on, McGraw Hill India, New Delhi, 2019.
2. C.P.Arora, “Thermodynamics”, Tata McGraw Hill Publishing Co. Ltd., New Delhi, 2003.
3. Rathakrishnan E, “Fundamentals of Engineering Thermodynamics”, 2nd Edi on, PHI Learning Pvt. Ltd.,
New Delhi, 2006.
4. Claus Borgnakke & Richard E. Sonntag, “Fundamentals of Thermodynamics”, 7th Edi on John Wiley and
Sons Inc. New York, 2009.

CO-PO Mapping

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2
CO1 3 1 2 3 2
CO2 3 2 1 3 2
CO3 3 2 1 3 2
CO4 3 2 1 3 2
CO5 1 2 3 3 2
3- High, 2-Medium, 1-Low
 Department: Electronics and Communication Programme: B.Tech
Engineering
Semester:First Course Category Code: PCC Semester Exam Type: TY
Periods/Week Credit Maximum Marks
Course Code Course
L T P C CA SE TM
ECUC101 Electronic Devices and Circuits 3 1 - 4 40 60 100
Prerequisite -
Upon completion of the course, the students will be able to
CO1 Demonstrate the understanding of DC circuits, AC circuits and resonance
Course CO2 Demonstrate the understanding of the operation and characteristics of diodes, BJT, FET
Outcome CO3 Explain the various applications of diodes.
CO4 Design biasing circuits for the BJT and FET
CO5 Analyze the small signal, low and high frequency characteristics of BJT and FET amplifiers
UNIT-I DC and AC Circuits Periods:12
Electrical circuit elements (R, L and C) - Definition of Voltage, Current, Power and Energy – Ohm’s law,
Kirchoff current and voltage laws, analysis of simple circuits with DC voltage – Division of current in series and
parallel circuits–Node and mesh method analysis of DC circuits - Representation of sinusoidal waveforms, peak CO1
and rms values, phasor representation, real power, reactive power, apparent power, power factor. Steady state
Analysis of single-phase ac circuits consisting of R, L, C, RL, RC and RLC series combinations. Series and
parallel resonance.

UNIT-II Semiconductor Diodes and Applications Periods:12

Introduction to semiconductors – PN junction diode-construction and working–Capacitance effects in diode-
current equation –VI characteristics- Breakdown in diodes-Applications : Half Wave Rectifier, Centre tapped CO2
and Bridge rectifiers–Ripple factor derivation with and without capacitance filter– Rectifier Efficiency and PIV- ,
Zener diode–Regulator–varactor diode-Schottky diode. CO3

UNIT-III BJT and FET Characteristics Periods:12

Construction, working and characteristics of CE, CB and CC configurations–Early effect-Thermal runaway–
Transistor as an amplifier. Construction, working and characteristics of JFET and MOSFET (enhancement mode CO2
and depletion mode).
UNIT-IV Bias Stabilization and Compensation Circuits Periods:12
BJT biasing and Stabilisation: Operating point– DC loadline-Bias Stabilisation circuits: Fixed bias, collector to CO1,
base bias and potential divider bias. Bias compensation circuits: Diode compensation, thermistor compensation CO4
and sensistor compensation. Biasing of JFET: Fixed bias,Self bias.
UNIT-V Low Frequency and High Frequency Analysis of Small Periods:12
Signal Amplifiers
Transistor hybrid model -h-parameters-Analysis of CE amplifier using h-parameter model. FET small signal CO1,
model-Low frequency analysis of Common Source amplifier. Hybrid pi model-Analysis of CE transistor CO5
amplifier using hybrid pi model, Analysis of Common Source FET amplifier at high frequency.

Lecture Periods:45 Tutorial Periods:15 Practical Periods:- Total Periods:60

Reference Books
1. D.P.Kothari and L.J.Nagrath, “Basic Electrical Engineering”,4th Edition, McGraw Hill Edition, 2019.
2. D. C. Kulshreshtha, “Basic Electrical Engineering”, 2nd Edition, Tata McGraw Hill, 2019.
3. C. Millman, Halkias and Satyabrata,”Electronic devices and Circuits”, Third edition, Mc GrawHill, 2010.
4. Robert L. Boylested and Louis Nashelsky, “Electron Devices and Circuits Theory", Prentice Hall of
India, 11th Edition, 2013.
5. David A.Bell," Electronic Devices and Circuits", Prentice Hall of India, 5th Edition, 2008.
6. S.Salivahanan et al,“Electronic Devices and Circuits”,Tata Mc Graw Hill, 5th Edition, 2022.
CO-PO mapping

CO PO PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO1 PO11 PO1 PSO PSO
1 0 2 1 2

CO1 3 3 3 1 ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ 2 1

CO2 2 2 2 1 ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ 2 1

CO3 2 2 2 1 ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ 2 1

CO4 2 2 2 1 ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ 2 1

CO5 2 2 2 1 ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ 2 1

ECUC10 2.2 2.2 2.2 1 ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ 2 1

1

Score: 3 – High; 2 – Medium; 1 – Low

 Department: Electronics and Communication Programme: B.Tech
Engineering
Semester: Second Course Category Code: PCC Semester Exam Type: TY
Periods/Week Credit Maximum Marks
Course Code Course Name
L T P C CA SE TM
ECUC102 Analog Communication 3 1 - 4 40 60 100
Prerequisite -
Upon completion of the course, the students will be able to
CO1 Demonstrate the understanding of signals and noise
Course CO2 Analyze the variants of Amplitude modulation and Frequency modulation schemes
Outcome
CO3 Demonstrate the understanding of the fundamentals of AM and FM demodulators

CO4 Compare different transmitter and receiver architectures.

CO5 Demonstrate the understanding of various pulse modulation schemes.

UNIT-I Signals and Noise Periods:12

Introduction of communication system, Block diagram, types of communication, modes of communication,
signal bandwidth, channel bandwidth, frequency spectrum, Signal classification
(continuous time signal, discrete time), Energy and power signal.
Shot Noise- Thermal noise-White Noise–Noise Calculations–Equivalent Noise Bandwidth–Noise Figure– CO1
Effective Noise Temperature
UNIT-II Amplitude Modulation Systems Periods:12
Introduction–Need for modulation– Amplitude Modulation-Suppressed carrier systems– DSB-SC,SSB-SC
-Bandwidth Requirements- Power relations - Generation and detection of AM waves – Generation and
detection of DSB-SC waves - Balanced Modulator, Ring Modulator, Coherent detection –Costas Loop- CO2,
Generation and detection of SSB-SC waves –Phase discrimination method, Coherent detection –Vestigial CO3
Sideband Modulation-Comparison of AM systems.
UNIT-III Angle Modulation Systems Periods:12
Introduction to Angle Modulation–FM and PM-Narrowband FM and Wideband FM–Bandwidth
Requirements-Pre-emphasis, De-emphasis-Generation and demodulation of FM waves–Direct and Indirect
CO2,
FM generation, FM Demodulation- FM to AM Conversion-Balanced Frequency Discriminator and PLL
CO3
demodulator, FM Stereo Multiplexing-Comparison of frequency modulation and Phase modulation system.

UNIT-IV Transmitters and Receivers Periods:12

Transmitters: Classification of transmitters - Block diagram of AM broadcasting transmitters- Low Level and
High-Level transmitters-FM transmitters-Direct and Indirect FM systems.
Receivers: Classifications of receivers-Block diagram–Receiver characteristics-Tuned radio frequency CO4
receiver–Superheterodyne receiver–AGC-Merits and demerits of different receivers. Block diagram of FM
receiver-Automatic frequency control-Communication Receivers-Delayed AGC.
UNIT-V Pulse Analog Modulation Schemes Periods:12
Sampling process–Pulse-amplitude modulation–Pulse-Width modulation–Pulse Position Modulation- CO1,
Methods of generation and detection-Bandwidth-noise tradeoff-FDM and TDM. CO5
Lecture Periods:45 Tutorial Periods: 15 Practical Periods:- Total Periods: 60
Text Books:
1. Simon Haykin, “Communication Systems”, Wiley Publication, New Delhi, 5th Edition 2015.
2. Kennedy G,“ Electronic Communication systems”, Tata Mc Graw Hill, New Delhi ,6th Edition 2017.
Reference Books:
1. Taub and Schilling, "Principles of Communication Systems", Mc Graw Hill International edition, New Delhi, 3rd
Edition 2007.
2. Carlson A B ,Communication systems: An Introduction to signals and noise in electrical communication", Mc
Graw Hill, New Delhi, 2002
3. Dennis John, Roddy and Coolen,“Electronic Communications”, Prentice Hall of India, New Delhi, 2003.

CO-PO Mapping

CO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2

CO1 3 3 3 3 - 2 ‒ ‒ ‒ ‒ ‒ ‒ 2 1

CO2 3 2 2 2 ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ 2 1

CO3 3 2 2 2 ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ 2 1

CO4 3 2 2 2 ‒ 2 ‒ ‒ ‒ ‒ ‒ ‒ 2 1

CO5 3 2 2 2 - - - ‒ ‒ ‒ ‒ ‒ 2 1

ECUC102
3 2.2 2.2 2.2 - 2 - ‒ ‒ ‒ ‒ ‒ 2 1

Score: 3 – High; 2 – Medium; 1 – Low

Department: Computer Science and Engineering Programme: B.Tech. (Common to all Branch)
Course Category Code:
Semester: First/Second Semester Exam Type: TY
ESC
Periods / Week Credit Maximum Marks
Course Code Course Name
L T P C CA SE TM
CSUC101 Programming for Problem Solving 2 0 0 2 40 60 100
Prerequisite: -
CO1 Ability to solve problems by writing programs using basic language constructs
Course CO2 Develop larger and complex programs with branching and looping statements
Outcome CO3 Formulate programs using Arrays, Structures and Union
CO4 Apply function-oriented approaches and pointers in C programs
UNIT-I Program Development Lifecycle Periods: 6
Problem Solving Techniques: Algorithm – Pseudocode - Flowchart – Generations of Programming
CO1
Languages – Test cases – Compiler – Interpreter – Number System
UNIT-II Introduction to C Periods: 6
C program structure – Token – Keyword – Identifier – Variable – Constants - Datatypes – Operators -
CO1, CO2
Operator Precedence – Storage classes - Input Statement – Output Statement
UNIT-III C Statements Periods:
Branching Statements: If, If-else, Else-if, Nested if – Switch case. Looping Statement: For loop – While
CO2, CO3
loop – Do-While Loop. Jumping Statement: Break - Continue
UNIT-IV Array, Structure and Union Periods: 6
Array: 1D – 2D – Declaration, Initialization and Accessing – String Array. Structures: Declaration,
CO3
Initialization and Accessing – Nested Structure – Array of Structure - Union
UNIT-V Functions and Pointers Periods: 6
Functions: user-defined - in-built (String, Math) - Call by Value – Call by Reference – Nested Function
CO4
– Recursive Function. Pointers: Declaration, Initialization and Accessing.
Lecture Periods: 30 Tutorial Periods: 00 Practical Periods: 00 Total Periods: 30
Reference Books:
1. Balagurusamy. E, “Programming in ANSI C”, Tata McGraw Hill, Eighth Edition, 2019.
2. Yashavant Kanetkar, “Let Us C: Authentic guide to C programming language”, BPB Publications, 19th
Edition, 2022
3. Byron Gottfried & Jitender Chhabra, “Programming with C”, Schaum's Outlines Series, 2017.
4. Brian W. Kernighan & Dennis Ritchie. “The C Programming Language”, Pearson Education India; Second
Edition,2015.

CO-PO Mapping
PO PO PO PO PO PO PO PO PO PO1 PO1 PO1 PSO PSO PSO
1 2 3 4 5 6 7 8 9 0 1 2 1 2 3
CO 3 3 2
2 - - - - - - 2 - - - -
1
CO 3 3 2 -
2 - - - - - 2 - - - -
2
CO 3 3 2 -
2 - - - - - - - - - -
3
CO 3 3 2 -
- - - - - - 2 - - - -
4
Score: 3 – High; 2 – Medium; 1 – Low
Department: Computer Science and Engineering Programme: B.Tech. (Common to all Branch)
Course Category Code:
Semester: First/Second Semester Exam Type: LB
ESC
Periods / Week Credit Maximum Marks
Course Code Course Name
L T P C CA SE TM
CSUC102 Computer Programming Laboratory 0 0 2 1 40 60 100
Prerequisite: -
Interpret C programming environment to write simple C programs using branching and
CO1
looping statements
Course CO2 Apply arrays and pointer for problem solving
Outcome
CO3 Demonstrate the working of structure and union concept in C programming
CO4 Implement programs using user-defined and in-built function
1. Study of C Program Development Environment
2. Understanding of compiling and executing of C program
3. Basic C Programs
CO1
a. Arithmetic Operations
b. Area and Circumference of a circle
c. Swapping with and without Temporary Variables
4. Programs using Branching statements
1. To check the number as Odd or Even
2. Greatest of Three Numbers
3. Grading based on Student’s Mark
4. Arithmetic operations using switch-case
CO1
5. Programs using Looping Statement
a. Computing Factorial of a number
b. Fibonacci Series generation
c. Prime Number Checking
d. Computing Sum of Digit
6. Programs using Arrays
a. Sum of ‘n’ numbers
b. Sorting an Array
CO1,
c. Matrix Addition, Subtraction, Multiplication and Transpose
CO2
7. Program using Pointer
5. Counting Vowels in the string
a. Call by reference
8. Program Using Structure
a. Student Information System
b. Employee Pay Slip Generation CO1,
c. Electricity Bill Generation CO3
d. Nested Structure
a. Demo on Union
9. Programs using Functions
b. Call by Value
c. Computing nCr CO1,
d. Factorial using Recursion CO4
e. Palindrome checking using string in-built functions
f. Sorting ‘n’ names using string in-built functions
Lecture Periods: 00 Tutorial Periods: 00 Practical Periods: 30 Total Periods: 30
Reference Books:
1. Balagurusamy. E, “Programming in ANSI C”, Tata McGraw Hill, Eighth Edition, 2019.
2. Yashavant Kanetkar, “Let Us C: Authentic guide to C programming language”, BPB Publications, 19th
Edition, 2022
3. Byron Gottfried & Jitender Chhabra, “Programming with C”, Schaum's Outlines Series, 2017.
4. Brian W. Kernighan & Dennis Ritchie. “The C Programming Language”, Pearson Education India; Second
Edition, 2015.
 CO-PO Mapping
PO PO PO PO PO PO PO PO PO PO PO1 PO PS PS PS
1 2 3 4 5 6 7 8 9 10 1 12 O1 O2 O3
CO 3 3 2
2 - - - - - - 2 - - - -
1
CO 3 3 2 -
2 - - - - - 2 - - - -
2
CO 3 3 2 -
2 - - - - - - - - - -
3
CO 3 3 2 -
- - - - - - 2 - - - -
4
Score: 3 – High; 2 – Medium; 1 – Low
 Programme: B.Tech. Computer Science and
Department: Computer Science and Engineering
Engineering
Course Category Code: Semester Exam Type:
Semester: First
PCC TY
Periods / Week Credit Maximum Marks
Course Code Course Name
L T P C CA SE TM
Fundamentals of Computer
CSUC103 3 1 0 4 40 60 100
Organization
Prerequisite: -
CO1 Explain the basics of functional units of a digital computer and types of computers
CO2 Interpret instructions sets and their impact on processor design
Course CO3 Analyze the execution of instructions in conventional and pipelined processors
Outcome CO4 Make use of computing algorithms for the design and implementation of ALU
Compare the performances of different types of memory, interconnecting devices, and their
CO5
impact on computer design
UNIT-I Basic Structures of Computer Periods: 12
Computer Types, Functional Units, Basic Operational Concepts, Types of Computer Architecture, Number
systems, Number Representation and Arithmetic Operations, Character Representation, Performance, CO1
Historical Perspective, Memory Locations and Addresses, Memory operations, Instructions, and Instruction CO2
Sequencing, Addressing modes, Assembly language, RISC and CISC styles.
UNIT-II Basic Processing Unit and Pipelining Periods: 12
Fundamental Concepts, Instruction Execution, Hardware Components, Instruction Fetch and Execution
CO1
Steps, Control Signals, Hardwired Control, Micro-programmed control. Pipelining: Basic Concept, Pipeline
CO3
Organization, Pipeline Hazards.
UNIT-III Computer Arithmetic Periods: 12
Addition and Subtraction of Signed Numbers, Design of Fast Adders, Multiplication of UnsignedNumbers,
Multiplication of Signed Numbers, Fast Multiplication, Integer Division, Floating-PointNumbers and CO4
Operations.
UNIT-IV Memory System Periods: 12
Basic Concepts, Semiconductor RAM Memories, Read-Only Memories, Memory Hierarchy, Cache
Memories, Associate memory, Performance Considerations, MemoryManagement requirements, Secondary CO5
Storage.
UNIT-V Input /Output Organization Periods: 12
Accessing I/O Devices: I/O Device Interface, Program-Controlled Data Transfer, Interrupts Driven Data
Transfer, DMA, Synchronous and Asynchronous Bus, Interface Circuits, Interconnection Standards: USB, CO5
SCSI.
Lecture Periods: 45 Tutorial Periods: 15 Practical Periods: 00 Total Periods: 60
Reference Books:
1. Carl Hamacher, Zvonko Vranesic, Safwat Zaky and Naraig Manjikian, Computer Organization and Embedded
Systems, Sixth Edition, McGraw Hill, 2022.
2. John P. Hayes, Computer Architecture and Organization, Third Edition, Tata McGraw Hill, 2017.
3. William Stallings, Computer Organization and Architecture, Designing for Performance, Tenth Edition, Pearson
Education, 2016.
4. M. Morris R. Mano, Michael D. Ciletti, Digital Design: With an introduction to Verilog HDL, VHDL and
SystemVerilog, Sixth Edition Pearson Education, 2021.
 CO – PO Mapping
PO PO PO PO PO PO PO PO PO PO1 PO1 PO1 PSO PSO PSO
1 2 3 4 5 6 7 8 9 0 1 2 1 2 3
CO 2 2 - - - - - - - - 2 - - 2
1
CO 2 2 - - - - - - - - - 2 2 - 2
2
CO 3 3 - - - - - - - - 2 - - 2
3
CO 3 3 2 - - - - - - - - 2 - - -
4
CO 2 2 - - - - - - - - - 2 - - -
5

Score:3 – High; 2 – Medium; 1 – Low

 Programme: B.Tech. Computer Science and
Department: Computer Science and Engineering
Engineering
Course Category Code: Semester Exam Type:
Semester: Second
PCC TY
Periods / Week Credit Maximum Marks
Course Code Course Name
L T P C CA SE TM
CSUC104 Software Engineering 3 1 0 4 40 60 100
Prerequisite: -
CO1 Illustrate the software process models suitable for variety of real-life software development
problems.
CO2 Develop software plan, requirement specification document and design models using
Course function-oriented approach.
Outcome
CO3 Design test cases and test plan for a specific testing activity.
CO4 Explain the software maintenance process and international quality standards for software
systems.
UNIT-I Introduction to Software Engineering Periods: 12
Importance of Software Engineering Discipline – Types of Software Companies– Software Life Cycle
Models – Classic Waterfall Model – Iterative Life Cycle Model – V Model - Prototyping Model –
Incremental Development model - Evolutionary Model – RAD Model – Agile Development Models – CO1
Spiral Model – Comparison of Software Life Cycle.
UNIT-II Software Project Management and Requirements Analysis Periods: 12
Responsibilities of a Software Project Manager – Project Planning – LOC and FP metric for Project Size
Estimation –– COCOMO – Halstead’s Software Science – Scheduling – Requirements for the Wheels Case
CO2
Study System- Requirements Engineering – Requirements Elicitation – List of requirements for the Wheels
System Development of Software Requirements Specification for a Case Study-.
UNIT-III Software Design Periods: 12
Characteristics of a Good Software Design – Cohesion and Coupling––Data Flow Diagrams –- RUP – UML
- Use Cases – Basic concepts of Objects and classes – class and object diagrams – state diagram- activity CO2
diagram – Sequence – collaboration – package-components-deployment diagrams for a case study.
UNIT-IV Coding and Software Testing Periods: 12
Coding Standards and Guidelines – Code Review – Software Documentation – Testing – Unit Testing –
Black Box Testing – White Box Testing – Debugging – Program Analysis Tools – Integration Testing – CO3
System Testing – Issues with Testing.
UNIT-V Software Maintenance and Quality Management Periods: 12
Characteristics of Software Maintenance – Reverse Engineering – Software Maintenance Process Models –
CO1,
Estimation of Maintenance Cost – Software Quality – Quality Management System – ISO 9000 – SEI
CO4
CMM.
Lecture Periods: 45 Tutorial Periods: 15 Practical Periods: 00 Total Periods: 60
Reference Books:
1. Rajib Mall, Fundamentals of Software Engineering, Fifth Edition, PHI Learning Pvt. Ltd., 2018.
2. Roger S. Pressman, Software Engineering: A Practitioner's Approach, Seventh Edition, McGraw-Hill, 2014.
3. Ian Sommerville, Software Engineering, Tenth Edition, Pearson Publishers, 2016.
4. Carol Britton and Jill Doake, A Student Guide to Object-Oriented Development, First Edition, Elesvier,2020.
 CO – PO Mapping
PO PO PO PO PO PO PO PO PO PO PO1 PO PS PS PS
1 2 3 4 5 6 7 8 9 10 1 12 O1 O2 O3
CO
3 3 - - - - - - - - - - - - -
1
CO
3 3 2 - - - - - - - - - - - -
2
CO
3 3 - - - - - - - - - - - - -
3
CO
3 3 - - - - - - - - - - - - -
4

Score:3 – High; 2 – Medium; 1 – Low

Department : EEE Programme: B.Tech.
Semester :First Course Category Code: PCC Semester Exam Type: TY
Periods / Week Credit Maximum Marks
EEUC101 Elements of Electrical Engineering
L T P C CA SE TM
3 1 - 4 40 60 100
Prerequisite: NIL
Course CO1 To understand the basic concepts of DC circuits and theorems.
Outcome: CO2 To explain the concepts of AC circuits
CO3 To understand the basic concepts of Three Phase circuits
At the end of
CO4 To understand electrical wiring and calcula on of electrical energy.
the course
students will CO5 To gain knowledge of electrical safety and protec on Devices.
be able to
UNIT-I DC Circuits Periods: 12
Review of Ohm's and Kirchoff's Laws, Series and parallel circuits - Star Delta conversion - Mesh and
CO1
Node Analysis of DC circuits- Network Theorems: Thevenin, Norton and Superposi on.
UNIT-II AC Circuits Periods: 12
Sinusoidal voltages and currents - average and R.M.S. values- peak factor and form factor for sinusoidal
and non-sinusoidal waveform- phase difference- lagging- leading and in phase quan es and phasor
CO2
representa on -real power, reac ve power, apparent power, power factor. Analysis of single-phase AC
circuits consis ng of R, L, C, RL, RC, RLC combina ons (series and parallel).
UNIT-III Three Phase Circuits Periods: 12
Concept of three-phase supply and phase sequence- voltages, currents and power rela ons in three
phase balanced star-connected and delta-connected loads along with phasor diagrams– Power CO3
measurement by two Wa meter method.
UNIT-IV Domes c Wiring Periods: 12
Requirements: Connectors and switches, Types of wiring: casing and craping-Layout of an domes c
wiring- Simple control circuit in domes c installa on. Power ra ng of house holds appliances- calcula on CO4
of electrical energy for domes c consumers.
UNIT-V Electrical Safety and Protec ve Devices Periods:12
Electrical Safety: Safety precau ons, electric shock, first aid for electric shock and other hazards, Use of
mul -meters - Grounding: Defini on, Importance of grounding, Types of grounding - Protec ve Devices: CO5
fuses, MCB, MCCB, ELCB and electromagne c relays.
Lecture Periods: 45 Tutorial Periods: 15 Prac cal Periods:NIL Total Periods: 60

Reference Books:
1. Basic Electrical and Electronics Engineering by R.Muthusubramanian and S.Salivahanan. McGraw Hill
Educa on India Pvt Ltd, New Delhi, 2009.
2. Electric Circuit Theory by Dr.M.Arumugam and N.Premkumar, Khanna Publisher, New Delhi, 2006.
3. B. L. Theraja, “Electrical Technology”, Vol.1, S. Chand Publica on, New Delhi, 2014.
4. D C Kulshreshtha, “Basic Electrical Engineering”, Tata McGraw Hill, 2nd Edi on, New Delhi, 2019.
 CO-PO Mapping
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2 PSO3
CO1 3 3 - - - - - - - - - - - -
CO2 3 3 - - - - - - - - - - - - -
CO3 3 3 - - - - - - - - - - - - -
CO4 3 3 2 - - - - - - - - - - - -
CO5 3 3 - - - - - - - - - - - - -

Score: 3 – High; 2 – Medium; 1 – Low

Department : EEE Programme: B.Tech.
Semester : Second Course Category Code: PCC Semester Exam Type: TY
Periods / Week Credit Maximum Marks
EEUC102 Electronic Devices and Circuits
L T P C CA SE TM
3 1 - 4 40 60 100
Prerequisite: NIL
Course CO1 Describe the characteris cs and opera on of PN junc on diode, BJT and FET
Outcome: CO2 Gain knowledge about various applica ons of PN junc on diodes.
CO3 Calculate biasing currents and voltages for BJT and FET circuits.
At the end of
Describe the proper es and characteris cs of few specialized diodes, optoelectronic
the course CO4
devices and power devices
students will
be able to CO5 Acquire knowledge about rec fiers, filters and regulators.
UNIT-I Semiconductor diodes Periods: 12
PN junc on diode - Construc on – forward and reverse bias opera on –volt-ampere characteris cs
mathema cal model of a PN junc on diode–Silicon versus Germanium diodes – Effects of temperature
on diode opera on– Sta c and dynamic resistances–Diode equivalent models– Specifica on sheets– CO1,
Transi on and diffusion capacitances–Diode switching characteris cs -reverse recovery me, Diode CO2
applica ons: Clipping circuits – posi ve clipper, nega ve clipper and biased clipper. Clamping circuits –
posi ve clamper, nega ve clamper and biased clamper.
UNIT-II Bipolar Junc on Transistors Periods: 12
Construc on and opera on– NPN and PNP transistors– CB, CE and CC configura ons – Specifica on
sheet, Transistor currents, current gains and leakage currents.
BJT characteris cs: Input and output characteris cs of CB, CE and CC configura ons and regions of
CO1,
opera on Biasing of BJTs – DC load line characteris cs - opera ng point– stabiliza on of opera ng
CO3
point– different biasing circuits: base bias, base bias with emi er feedback, base bias with collector
feedback and voltage divider bias and Bias compensa on techniques–thermal stability and thermal
runaway.
UNIT-III Field Effect Transistors Periods: 12
Construc on and opera on of JFET – drain and transfer characteris cs – JFET parameters - Shockley’s
CO1,
equa on– comparison between JFET and BJT. MOSFET – Construc on and opera on - deple on and
CO3
enhancement types Biasing of FETs – Gate bias, source bias and poten al divider bias.
UNIT-IV Special Devices Periods: 12
Principle of opera on of Scho ky diode, Varactor diode, Zener diode, Tunnel diode and PIN Diodes.
OPTO ELECTRONIC DEVICES: Principle of opera on and characteris cs of Photo diodes, Phototransistors, CO4
Photo conduc ve cells, LEDs and LCDs, Opto-couplers, seven segment displays, Solar cells and
thermistors.
UNIT-V Power Devices and Rec fiers & Power Supplies Periods:12
Introduc on to power devices– SCR, SCS, GTO, Shockley diode-DIAC- TRIAC and UJT.
CO2,
Half-wave rec fier and full wave rec fiers: center tapped and bridge type – PIV and ripple factor
CO4,
calcula ons - ripple reduc on using filter circuits: inductor filter, capacitor filter, LC filter and filter.
CO5
Shunt and series voltage regulators.
Lecture Periods: 45 Tutorial Periods: 15 Prac cal Periods:NIL Total Periods: 60

Reference Books:
1. Jacob Millman and Christopher C Halkias, Electronic Devices and Circuits, McGraw Hill Edi on, 4th
Edi on, 2015.
2. Robert L. Boylestad and Louis Nashelsky, Electronic Devices and Circuit Theory, Pearson, 11th Edi on,
2021.
3. David A Bell, Electronic Devices and Circuits, oxford higher educa on, 5th Edi on, 2018.
4. J. D. Ryder, Electronic Fundamentals and Applica ons, Pearson Educa on, Canada, 1976.
5. Allen Mo ershed, Electronic Devices and Circuits: An Introduc on, PHI Learning, 2011
 CO-PO Mapping
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2 PSO3
CO1 3 3 - - - - - - - - - - - - -
CO2 3 3 2 - - - - - - - - - - - -
CO3 3 3 3 - - - - - - - - - - - -
CO4 3 3 - - - - - - - - - - - - -
CO5 3 3 - - - - - - - - - - - - -
Score: 3 – High; 2 – Medium; 1 – Low
Department : Electronics & Instrumentation Programme: B.Tech.
Engineering
Semester :1 Course Category Code: Semester Exam Type:
Periods / Week Credit Maximum Marks
Course Code Course Name
L T P C CA SE TM
Fundamentals of
EIUC101 3 1 - 4 40 60 100
Instrumentation
Prerequisite:
Demonstrate a comprehensive understanding of the principles and significance of
CO1
instrumentation.
Analyze and classify measurement systems based on their characteristics and
CO2
Course applications.
Outcome Evaluate and select appropriate sensors and transducers for specific measurement
CO3
tasks.
Apply signal conditioning techniques to accurately process and interpret
CO4
measurement data.
UNIT-I Understanding Circuit Laws, Measurement Periods: 12
Systems, and Calibration
Basic Circuit Laws – Ohms Law, KCL, KVL. - Definition, importance, and scope of
instrumentation - Measurement Systems - Types of measurements and measurement units -
classification of measurement systems - Errors in measurements –types of errors- Statistical CO1
analysis of measurement data - mean, standard deviation – Importance of calibration in
instrumentation - Calibration methods and standards
UNIT-II Basics of sensors Periods: 12
Static & Dynamic Characteristics of Sensor - Principles of sensing and transduction - Types of
CO2,
sensors – based on principle of operation: resistive, capacitive, inductive, magnetic, optical –
CO4
based on application – Selection Criteria
UNIT-III Basics of Electronics Periods: 12
Basics of Electronic circuits - Review of Transistor Amplifiers (CB, CE, CC) – basics of opamp -
amplification, filtering - Analog-to-digital conversion (ADC) and digital-to-analog conversion CO1
(DAC) – Basics of Power supplies
UNIT-IV Measuring Instruments Periods: 12
Principle & Operation of Measuring Instruments: D’Arsonval galvanometer – moving coil,
moving iron meters, Voltmeter, Ammeter, Ohmmeter, Wattmeter, CRO, Function Generator - CO3
Megger
UNIT-V Digital systems Basics: Periods: 12
Digital Basics: Review of Numbers systems & Logic gates (AND, OR, NOT, NAND, NOR) –
CO1
DVM, DMM, DFM, DPM
Lecture Periods: 45 Tutorial Periods: 15 Prac cal Periods:0 Total Periods: 60

Text book:
1. "A Course in Electrical and Electronic Measurements and Instrumentation" by A.K. Sawhney,
Dhanpat Rai & Co., 23rd Edition, 2020

References:
1. "Principles of Measurement Systems" by John P. Bentley, Pearson Publishing, 5th edition, 2021
2. "Instrumentation and Measurement in Electrical Engineering" by Roman Malaric, CRC Press,
2nd Edition, 2020
CO PO Mapping
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 3 3 3 - - - - - - - - -
CO2 3 3 3 - - - - - - - - -
CO3 3 3 2 - - - - - - - - -
CO4 2 2 2 - - - - - - - - -
Score: 3 – High; 2 – Medium; 1 – Low
Department : Electronics & Instrumentation Programme: B.Tech.
Engineering
Semester :2 Course Category Code: Semester Exam Type:
Periods / Week Credit Maximum Marks
Course Code Course Name
L T P C CA SE TM
Basics of Industrial
EIUC102 3 1 - 4 40 60 100
Automation & Control
Prerequisite:
Describe the fundamental concepts and types of control systems, including their
CO1
components and functions.
Design and analyze feedback control systems using PID controllers and stability
Course CO2
analysis techniques.
Outcome
CO3 Program and troubleshoot PLCs for industrial automation applications.
Apply process instrumentation principles to monitor and control various
CO4
industrial processes effectively.
UNIT-I Basic concepts of control systems Periods: 12
open-loop vs. closed-loop systems - Types of control systems Automatic, Manual - Role of
instrumentation in control systems - Feedback control loop: sensors, controllers, actuators – P&I CO1
Diagram
UNIT-II Basics Measurement & controllers Periods: 12
Basics Measurement & control - Level, Temperature, Flow, Pressure - Types of Controllers –
CO2,
ON/OFF controller, P, I, D & PID controller: principles & applications– Mathematical model of
CO4
First order systems – Selection Criteria
UNIT-III Overview of industrial automation Periods: 12
Overview of industrial automation and its components - PLC (Programmable Logic Controller)
CO3,
architecture, basic programming and applications – Basics of Distributed Control Systems -
CO4
SCADA (Supervisory Control and Data Acquisition) systems
UNIT-IV Introduction to Virtual instruments Periods: 12
Evolutions of VI, advantages, block diagram and architecture of a virtual Instrument-Graphical
programming, and comparison with conventional programming - Controls and indicators- Data CO4
flow Programming-Editing – Debugging and Running a Virtual Instrument – Loops & Structures
UNIT-V Introduction to smart sensors, Periods: 12
MEMS sensors and IoT (Internet of Things) - Measurement and monitoring of physiological
parameters - Role of instrumentation in renewable energy systems - Recent advancements in CO4
instrumentation technology and their applications
Lecture Periods: 45 Tutorial Periods: 15 Prac cal Periods:0 Total Periods: 60

Text Book
1. "Control Systems Engineering" by I.J. Nagrath and M. Gopal, New Age International Publishers, 6th
Edition, 2021

Reference Books:
1. "Programmable Logic Controllers" by Frank D. Petruzella, McGraw-Hill Education, 6th Edition,
2020
2. "Modern Control Engineering" by Katsuhiko Ogata, Pearson, 6th Edition, 2021
CO PO Mapping
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 3 3 2
CO2 3 3 2
CO3 2 2 1
CO4 3 1
Department :CHEMICAL ENGINEERING Programme: B.Tech
Semester : First Course Category Code: Semester Exam Type: TY
PCC
Periods / Week Credit Maximum Marks
Course Code Course Name
L T P C CA SE TM
CHUC101 Basics of Chemical Engineering 3 1 - 4 40 60 100
Prerequisite
CO1 Understand the role of Chemical Engineer in Process Industry
CO2 Able to use appropriate units for Material Balances Calculations
Course
CO3 Gain the basic Knowledge of Fluid Flow and Heat Transfer
Outcome
CO4 Obtain the basic knowledge of Mass Transfer and Reaction Rates and Reactors
CO5 Gather the basic Knowledge of Controls and Economics
UNIT-I Introduction to Chemical Engineering Periods: 12
The impact of Chemical Engineering, The Chemical Engineering Discipline, The role of Chemical
Processing: What is a Chemical Process, Representing Chemical Process Using Process Diagrams;
Solving Chemical Engineering Problems: Strategies for solving problems, Ethical Considerations in CO1
Solving Problems.

UNIT-II Material Balances Periods: 12

Describing Physical Quantities: Units, Some important Process variables; Material Balances:
Conservation of Total Mass, Material Balances for Multiple Species, Material Balances: Summary.
CO2
Spreadsheets: The Calculation Scheme, Setting Up a Spreadsheet, Graphing

UNIT-III Fluid Flow and Energy Balances Periods: 12

Fluid Flow: The Concept of Pressure, Non-flowing Fluids, Principle of fluid flow, Pumps and Turbines;
Heat Transfer: Energy Balance for Steady State Open Systems, Application of the Steady State Energy CO3
Balance, Heat Exchanger Devices.
UNIT-IV Mass Transfer with and without Chemical Reactions Periods: 12
Mass Transfer : Molecular Diffusion, Mass Convection, Mass convection with Transfer across phase
Boundaries, Multi-step Mass Transfer; Reaction Engineering: Describing Reaction Rates, Designing the CO4
Reactor;
UNIT-V Process Control and Process Economics Periods: 12
Controlling The Process: The need for the Process Control; Feedback Control, Feed forward Control and
Comparison of strategies; Economics: Costs, Profitability, Economics for the Acid-Neutralization
CO5
Problem, Reporting the Results; Case Studies: Using Engineering Teams for These Case studies; Case
Study-I: Manufacture of Aspirin, Case Study-II: Manufacture of Xylenes
Lecture Periods: 45 Tutorial Periods: 15 Practical Periods: Total Periods: 60
Text/Reference Books:
1. Kenneth A. Solen, John N. Harb, Introduction to Chemical Engineering: Tools for Today and Tomorrow, A
First Year Integrated Course, 5th Edition, Wiley Student Edition, 2015.
2. Max Peters, “Elementary Chemical Engineering”, 2nd Edition, TATA Mc Graw Hill Publication, 2009.
3. S.Pushpavanam, “Introduction to Chemical Engineering”, PHI Learning Pvt. Limited, 2012.
4. Morton M. Denn, “Chemical Engineerng - An Introduction”, Cambridge University Press, 2012.
5. Walter L. Badger, Julius T. Danchero, “Introduction to Chemical Engineering”, TATA McGraw Hill, 1997.
6. Salil K. Ghosal, Shyamal K. Sanyal, Siddhartha Datta, “Introduction to Chemical Engineering”, First Edition,
Tata Mc Graw Hill , 2004 .

CO-PO Mapping

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2 PSO3
CO1 3 2 3
CO2 3 2 2 3 3 3
CO3 3 2 2 3 3
CO4 3 2 2 3 3
CO5 3 2 2 3 2 2 2 3 3 3
Score: 3 – High; 2 – Medium; 1 – Low
 Department: Chemical Engineering Programme: B.Tech (CH)
Semester: Second Course Category Code: PCC Semester Exam Type: TY

Periods/Week Credit MaximumMarks

Course Code Course Name
L T P C CA SE TM
CHUC102 Process Calculations 3 1 - 4 40 60 100

Prerequisite
On successful completion of the course, students should be able to:
Understand the fundamental concepts of dimensional consistency, stoichiometry and estimation of
CO1
composition of mixtures and solutions, conversion, yield, selectivity, ideal and real behavior of
gases, vapors and liquids.
Course
CO2 Analyze the problem statement and balance the material flowing through a chemical
Outco process/equipment without and with reactions
me Understand the general energy balance, simplify and apply to open and closed systems with and
CO3
without reactions
CO4 Able to draw flow diagrams and solve problems involving recycle, Purge and bypass in a process
or unit.
CO5 Able to judge the process units from various angles such as: society, environment, sustainability,
etc.
UNIT-I Process Principles Periods: 12
Introduction to Chemical engineering calculations, units and dimensions, mole and molecular weight,
properties of gases, vapors, liquids, solutions and solids, gas laws, partial pressures, vapor pressures, saturation
and equilibria, Raoults law, partial saturation and humidity. CO1,
Introduction to Material and Energy Balances- Derivation of Steady state and Unsteady state Balance equations CO2
for any system
UNIT-II Material Balances on Non-reactive System Periods: 12
Material balances without chemical reactions, stoichiometry and unit operations - distillation, absorption,
stripping, extraction, leaching, crystallization, drying and psychrometry. Recycle, purge and CO2,
By-pass calculations. CO3
UNIT-III Material Balances on Reactive system Periods: 12
Material balances involving chemical reactions, simple oxidation reaction, calculations involving combustion
of gaseous, liquid and solid fuels. Recycle, purge and bypass calculations. Introduction to unsteady balances, CO2,
Balances on mixing vessel, Level Systems CO3,
CO4
UNIT-IV Energy Balances on Non-reactive System Periods: 12
Energy balance-heat capacity and calculation of enthalpy changes, Enthalpy changes for phase transitions, CO2,
evaporation, Clausius- Clapeyron equation. CO3,
CO4
UNIT-V Energy Balances on Reactive Systems Periods: 12
Energy balances with chemical reaction – heat of reaction and adiabatic flame temperature calculations CO2,
CO5
Lecture Periods: 45 Tutorial periods: 15 Practical Periods: - Total Periods: 60
ReferenceBooks:
1. Bhatt and S.M. Vora, Stoichiometry, Tata Mc Graw Hill, 5th Edition, 2013.
2. David.M. Himmelblau and Riggs , Basic Principles and Calculations in Chemical Engineering, Prentice Hall of
India Ltd., 7thEdition,2004
3. A.Hougen, K.M.Watson and K.A.Ragatz, Chemical Process Principles, Vol.1, CBSE Publishers, 1980.
4. Richard M.Felder,RonaldW.Rousseau, Elementary Principles of Chemical Processes, Wiley Publications,3rd Ed.,
2007.
5. V.Venkataramani, N. Anantharaman and K.M. Meera Sheriffa Begum, Process Calculations, PHI Learning Private
Limited, 2nd Edition, 2012.
6. D.C. Sikdar, Chemical Process Calculations, PHI Learning Private Limited, 2nd Edition, 2013.
 CO-PO MAPPING

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2 PSO3
CO1 3 3 2 3
CO2 3 3 3 3
CO3 3 3 2 3
CO4 3 2 2 2
CO5 3 3 3 3
Score: 3 – High; 2 – Medium; 1 – Low
 Department : IT Programme : B.Tech
Semester : First Course Category Code: Semester Exam Type:
Periods / Week Credit Maximum Marks
Course Code Course Name
L T P C CA SE TM
ITUC101 Information Technology Essentials 3 1 - 4 40 60 100
Prerequisite: -

Course CO1 Discuss the basic concepts of Information Technology.

Outcome
CO2 Describe the working principle of Computer and its hardware components.
CO3 Examine various programming concepts and decide the best one to be applied for real time
At the end of applications
the course Design websites with basic multimedia features that meet specified needs and interests using
CO4
basic elements to control layout and style.
students will be
able to Develop dynamic website/web based applications using HTML and MYSQL database.
CO5

UNIT-I Introduction to Information Technology Periods: 12

Core Functions of Information Technology- Components of the Computer System- Data and Information -
Data Storage -Data Organization- Introduction to Content Management Systems (CMS)- CMS Tools and
Examples- Societal Impacts of Information Technology. CO1

UNIT-II Hardware Essentials Periods: 12

Motherboard – Networking Cards – Graphics Card – Processors – Hard Drive – USB Port –Monitor Ports
– Servers – Types of Servers – Web Server – Database Server – Data Centre and Cloud Servers – Server
Management CO2

UNIT-III Computer Programming and Languages Periods: 12

Introduction, Algorithm, Programming Paradigms, characteristics of a Good Program, Programming
Languages, Generations of Programming Languages, Features of a Good Programming Language. Operating
System- Introduction, Operating System Definition, Evolution of Operating System, Types of Operating CO3,CO
4
Systems. Database Fundamentals- Introduction, Database Definition

UNIT-IV Multimedia Essentials Periods: 12

Components of Multimedia -Multimedia and Hypermedia-Overview ofMu1timedia Software Tools-

Graphics and Image Editing-Video Editing-Animation- Mu1timedia Authoring and tools-Adobe Premiere-
Macromedia Director-Macromedia Flash-Dreamweaver
CO4,CO
5
UNIT-V WEB and Scripting Essentials Periods:12
Internet Basics – Browser Fundamentals – Authoring Tools – Introduction to HTML5 – HTML5 Tags –
HTML5 Forms – Cascading Style Sheets (CSS3) Fundamentals – Need for Scripting Languages –
Introduction to JavaScript/ Angular JS. CO4,CO
5
Lecture Periods: 45 Tutorial Periods: 15 Practical Periods: Total Periods: 60
Reference Books:
1. Shambhavi Roy, Clinton Daniel, Manish Agrawal, “Fundamentals of Information Technology” USF Publications,
2023.
2. Rajaraman .V “Introduction to Information Technology” PHI Learning; 3rd edition,2018
3. Irv Englander “The Architecture of Computer Hardware, Systems Software and Networking:”, Wiley, Fifth Edition,
2016.
4. Deane Barker “Web content management: Systems, features, and best practices. Boston: O’Reilly, First Edition,2016.
5. Niederst Robbins, Jennifer, “Learning Web Design: A Beginner's Guide to HTML,
6. Ze-Nian Li and Mark S. Drew,” Fundamentals of Multimedia”, Springer International Publishing Switzerland ,
Second Edition 2014
7. Robert W. Sebesta, “Concepts of Programming Languages , Pearson Publisher Tenth Edition, 2012

CO-PO MAPPING

CO/P PO PO PO PO PO PO PO PO PO PO PO PO PS0 PS
O 1 2 3 4 5 6 7 8 9 10 11 12 1 O2
CO1 2 2 2 3 2 1 3 2
CO2 2 2 3 3 2 1 3 1
CO3 2 3 3 3 2 2 2 3
CO4 2 2 3 3 2 2 2 2
CO5 2 2 3 3 2 2 2 2
 Department : IT Programme : B.Tech
Semester : Second Course Category Code: PCC Semester Exam Type: TY
Periods / Week Credit Maximum Marks
Course Code Course Name
L T P C CA SE TM
ITUC102 Digital Logic Design 3 1 - 4 40 60 100
Prerequisite: -
Course CO1 Describe the combinational circuits, sequential circuits, memory / programmable logics.
Outcome
CO2 Solve complex Boolean functions through algebraic manipulation and Karnaugh maps
CO3 Describe the characteristics of various Flip-Flops
At the end of
Design PLDs from their specifications or truth/function table
the course theCO4
students will be
able to Design digital systems with combinational and sequential circuits logic
CO5
UNIT-I BOOLEAN ALGEBRA AND GATES Periods: 12
Number Systems: Binary, Octal, Hexadecimal – Representation of Negative Numbers – 1’s and 2’s Complements
– Arithmetic Operations – Binary Codes – Boolean Algebra – Theorems and Postulates – Functions – Truth Table
CO1,
– Canonical and Standard Forms – Minterms and Maxterms - Logic Gates – Universal gates
UNIT-II SIMPLIFICATION OF BOOLEAN FUNCTIONS Periods: 12
Sum of Products and Product of Sums- Simplification of Boolean Functions –Karnaugh Map – 2, 3, 4 variables
– NAND/NOR Implementations - Two level and multi-level implementation – Don’t care conditions.
CO2,
UNIT-III COMBINATIONAL LOGIC Periods: 12
Design Procedure – Adders- Subtractors - Binary Parallel Adder – Carry Look-ahead Adder – BCD Adder –
Binary Multiplier – Magnitude Comparator – Code Converters – Decoder – Encoder – Priority Encoder –
Mux/Demux – Applications. CO1,
CO5
UNIT-IV SEQUENTIAL CIRCUITS Periods: 12
Sequential Circuits –latches (S-R Latch, D-Latch)– flip flops (S-R Flip Flop, D-Flip Flop, J-K Flip Flop, T-Flip
Flop) - Master Slave Configuration of J-K Flip Flop – analysis of clocked sequential circuits – Registers and
Counters: Registers – shift registers –Ripple counters –synchronous counters
CO1,
CO5
UNIT-V MEMORY AND PROGRAMMABLE LOGIC Periods:12
Introduction - Random Access Memory - Memory Decoding - Read Only Memory - Programmable Logic Array
(PLA) - Programmable Array Logic (PAL) - Sequential Programmable Devices
CO1,
 CO4

Lecture Periods: 45 Tutorial Periods: 15 Practical Periods: Total Periods: 60

Reference Books:
1. Shipra Gupta, “Digital System Design” Kararia, 2021
2. M. Morris Mano and Michael D. Ciletti, Digital Systems: With an Introduction to the Verilog HDL, Sixth
Edition, Pearson, 2018.
3. Samir Palnitkar, VERILOG HDL – A Guide to Digital Design and Synthesis, Pearson Education Inc., Second
Edition, 2012.
4. J. Bhasker, VHDL Primer, Prentice Hall of India Pvt. Ltd, Third Edition, 2006.
5. Thomas L. Floyd and R.P. Jain, Digital Fundamentals, Pearson Education, Tenth edition, 2008.
6. Leach Malvino, Digital Principles and Applications, Tata McGraw Hill, Fifth edition, 2005.
7. Charles H. Roth, Fundamentals of Logic Design, Thomson Brooks/Cole, Fifth edition, 2003.
8. Thomas C Bartee, Computer Architecture and Logic Design, McGraw Hill, Singapore, 2002.

CO-PO Mapping Table

CO/P PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO1 PO1 PO1 PSO PSO2
O 0 1 2 1
CO1 2 2 1 1 - - - - - - - - 2 1
CO2 2 1 - 2 - - - - - - - - 2 1
CO3 3 2 1 2 - - - - - - - - 2 1
CO4 3 3 2 2 - - - - - - - - 2 1
CO5 3 3 2 2 - - - - - - - - 2 1
Avg 2.6 2.2 1.5 1.8 2 2
Department: Mechatronics Programme : B.Tech.(MT)
Semester : First Course Category Code: PCC / Semester Exam Type: TY
Periods / Week Credit Maximum Marks
Course Code Course
L T P C CA SE TM
MTUC101 Basics of Mechatronics 3 0 0 3 40 60 100
Prerequisite Nil
CO1 Differentiate the concurrent mechatronics and traditional approach.

CO2 Describe transducers and micro mechatronic system and their applications
Course
Outcome
After
CO3 Defines the actuators and their application
successful CO4 Explain controllers and algorithms and their applications
completion of
course, the CO5 Describe the interfacing concepts to appreciate the interdisciplinary
student will
be able to:
UNIT – I Introduction Periods: 9
Definition, basic concepts and elements of mechatronic systems and comparison with traditional
approach of design, needs and benefits of mechatronics in manufacturing - Applications in robotics, CNC,
Automotive Systems etc.
CO1
UNIT-II Transducers and Micro Mechatronic System Periods: 9
Introduction to transducers- Primary, Secondary- Working, Mechanical device as primary detector,
electrical transducers, active & passive, analog & digital.
CO2
Introduction to micro mechatronics system- System principle - Component design – System design-
Scaling laws- Micro actuation- Micro robot- Micro pump - Applications of micro mechatronic
components.
UNIT-III Drives and Actuators Periods: 9
Solenoids, relays, diodes, DC motor, AC Motor, stepper motors, Hydraulic & Pneumatic devices, Power
supplies, valves.
CO3
UNIT-IV Controllers and Algorithms Periods: 9
Introduction to Microprocessor -Microcontrollers, Programmable Logic Controllers (PLC), Artificial Neural
Networks (ANN), Fuzzy controls. CO4

UNIT-V Interfacing Periods: 9

Introduction to Input / Output addressing, interface requirements, peripheral interface adapters, serial CO5
communications – examples.
Lecture Periods: 45 Tutorial Periods: Practical Periods: Total Periods: 45
Reference Books:
1. W Bolton, Mechatronics, Pearson Education, Sixth Edition, 2015.
2. D. A. Bradley, Mechatronics and the Design of Intelligent Machines and Systems, CRC Press, 2000.
3. Dan Nesculescu, Mechatronics, Pearson Education Pvt. Ltd, Fourth Impression 2009.
4. David G. Alciatore & Michael B Histand., Introduction to Mechatronics and Measurement systems,
Tata McGraw Hill, Third Edition, 2007.
5. D. Shetty & R. Kolk, Mechatronics System Design, Second Edition, SI, Global Engineering, 2011.
CO-PO Mapping

PO PO PO PO PO PO PO PO PO PO1 PO1 PO1 PSO PSO

1 2 3 4 5 6 7 8 9 0 1 2 1 2
CO 2 2 2 1
1
CO 3 3 2 1 2 1
2
CO 3 2 1 2 1
3
CO 3 2 1 1 2 2 2
4
CO 3 3 2 2 1 2 1
5
Department: Mechatronics Programme : B.Tech.(MT)
Semester :Second Course Category Code: PCC / Semester Exam Type: TY
Periods / Week Credit Maximum Marks
Course Code Course
L T P C CA SE TM
MTUC102 Basics of Sensors and Measurements 3 0 0 3 40 60 100
Prerequisite Nil
CO1 Expertise in various calibration techniques and signal types for sensors.
Course CO2 Apply the various sensors in the Automotive and Mechatronics applications
Outcome
After CO3 Learn the various sensors used to measure various physical parameters.
successful
CO4 Study the basic principles of various smart sensors.
completion of
course, the
CO5 Implement the DAQ systems with different sensors for real time applications
student will be
able to:
UNIT – I Introduction to Sensors Periods: 9
Basics of Measurement – Classification of errors – Error analysis – characteristics of transducers –
Classification of sensors – Sensor Output Signal Types.
CO1
UNIT-II Motion, Proximity And Ranging Sensors Periods: 9
Motion Sensors – Potentiometers, Encoders – Optical, Magnetic, Inductive, Capacitive, LVDT– RVDT-
Range Sensors – RF beacons, Ultrasonic Ranging, Applications.
CO2
UNIT-III Force, Magnetic And Heading Sensors Periods: 9
Strain Gage, Load Cell, Magnetic Sensors –types, principle, requirement and advantages: Magneto resistive
– Hall Effect – Current sensor- Heading Sensors – Compass, Gyroscope, Inclinometers -Applications.
CO3
UNIT-IV Optical, Pressure And Temperature Sensors Periods: 9
Photo conductive cell, photo voltaic, Photo resistive, LDR – Fiber optic sensors – Pressure – Diaphragm,
Piezoelectric – Tactile sensors, Temperature – IC, Thermistor, Thermocouple. Acoustic Sensors – flow and CO4
level measurement, Radiation Sensors - MEMS & Nano Sensors, LASER sensors - Applications.

UNIT-V Signal Conditioning And DAQ Systems Periods: 9

Data Acquisition: Single channel and multi-channel data acquisition – Data logging – Benefits and
applications - Automobile, Aerospace, Home appliances, Manufacturing, Environmental monitoring.
CO5
Lecture Periods: 45 Tutorial Periods: Practical Periods: Total Periods: 45
Reference Books:
1. Ernest O Doebelin, “Measurement Systems – Applications and Design”, Tata McGraw-Hill, 2009.
2. Sawney A K and Puneet Sawney, “A Course in Mechanical Measurements and Instrumentation and Control”,
12th edition, Dhanpat Rai & Co, New Delhi, 2013.
3. Patranabis D, “Sensors and Transducers”, 2nd Edition, PHI, New Delhi, 2010.
4. John Turner and Martyn Hill, “Instrumentation for Engineers and Scientists”, Oxford Science Publications,
1999. Richard Zurawski, “Industrial Communication Technology Handbook” 2nd edition, CRC Press, 2015.
5. Czichos, Horst, Measurement, Testing and Sensor Technology, Springer International Publishing, 2018.
 PO PO PO PO PO PO PO PO PO PO1 PO1 PO1 PSO PSO
1 2 3 4 5 6 7 8 9 0 1 2 1 2
CO 3 2 2 1
1
CO 3 3 2 2 1
2
CO 3 2 1 2 1
3
CO 3 2 1 2 2
4
CO 3 3 2 2 1 1 1 3 1
5
Department : Programme : B.Tech.
Semester : First/Second Course Category Code: Semester Exam Type:
SEC LB
Periods/Week Credit Maximum Marks
Course Code Course Name
L T P C CA SE TM
GEUS101 Basic Engineering Skills
1 - 4 3 60 40 100
Laboratory - I
Prerequisite NIL
Course CO1 Understanding the fundamentals of masonry technology
Outcome CO2 Gain skills in carpentry and sheet metal works
At the end of CO3 Understand basic properties chemicals and their handling and usage
the course CO4 To demonstrate understanding the principle of operation of various Electrical
students will home appliances, Solar PV system and their wiring method
be able to
UNIT – I (Civil Engineering) Periods:15
CO1
1. Dimensions and Building Materials
Basic Dimension and Units- Methods of measurements–Masonry tools and applications –
Building materials and their uses –plans and Documents - Field study and Practical’s .
2. Building Construction and working strategy
Construction of walls-Types; Placing of reinforcement – for beams, column ,slabs and
footings as per the detailed drawing- Plastering and techniques – Laying of Tiles , marbles
and granite for cladding and floor - Field study and Practical’s
3. Setting out of Buildings and Drainage system
Marking diagonals, setting out cross walls & offsets. Marking excavation lines & fixing of
plinth & floor levels. Setting out Drainage lines – finishing for plumbing and closet works
– Field and Practical’s

UNIT-II (Mechanical Engineering) Periods: 15

1. Carpentry
Study of different carpentry tools and their functions. Types of joints and their applications.
Procedure for making different types of joints.
Exercises:
i) Lap joint
ii) corner mortise joint and
iii) Dovetail joint

2. Sheet Metal work

Study of sheet metal work tools and their functions. Different types of sheet metal CO2
operations, Applications.
Exercises:
i) Dust pan
ii) box tray and
iii) Frustum of cone
UNIT-III (Chemical Engineering) Periods:15
1. Studies on physical properties measurements (Boiling point, Density, Viscosity)
2. Studies on acid/base and es ma on of Normality/Molarity and Molality Materials
safety and data sheet
3. Studies on wet bulb/dry bulb (Humidity calculation, relative humidity calculation
etc)
4. Studies on colligative properties (Boiling point ,freezing point elevation)
5. Studies on colours/flavours extraction/synthesis
6. Studies on centrifugal pump priming/cavity
7. Studies on peristaltic pump-calibration
8. Studies on basic (mass, heat and momentum transfer equation) equations and their
verification
9. Studies on pipes, tube and fittings and valves and their standards and Hoop stress
calculations
10. Studies on flow meters and their utilization and flow calculations CO3
11. Studies on heat insulators and elements and their calculations
12. Soap preparation and analysis (fatty content and alkali content)
13. Handmade papers
14. Basic fuel analysis.
15. Bomb calorimeter (calorific value estimation)
16. Momentum transfer/ Heat transfer calculations/ Mass transfer calculations using
Excel program
17. Steam distillation experiment
18. Testing the adulteration of coconut oil (Saponification number and Cloud & Pour
point)
19. Testing of Viscosity of oils. (Viscometer)
20. Quality analysis of water. (pH, Density, Hardness, Alkalinity, TDS, DO )..

UNIT-IV (Electrical and Electronics Engineering) Periods: 15

1.Wiring
(i) Lamp controlled from two different places and from three different places.
(ii) Bedroom wiring and Godown wiring.
(iii)Doctor’s room wiring
2.Electrical Maintenance
(i) Demonstration and testing of mixer and iron box
(ii) Demonstration and testing of grinder and induction stove CO4
(iii) Demonstration and testing of fan and tube light.
3.Solar setup
(i) Study of solar cell characteristics
(ii) Measurement of solar insolation using pyranometer
(iii) Serial and parallel operation of solar panel

Lecture Periods: 15 Tutorial Periods: - Practical Periods: 60 Total Periods :75

Reference Books:
1. GPS Sattelite Surveying—Alfred Leick—Wiley
2. Remote sensing and Geographical Information System, By A. M. Chandra and S. K. Ghosh,
Narosa Publishing House.
3. Remote Sensing & GIS,2/E—Bhatta– Oxford University Press
4. Principles of Geographical Information System—Burrough– Oxford University Press
5. Surveying—M.D.Saikia—PHI Learning Pvt . Ltd.Delhi
 6. Advanced Surveying -Total Station, GIS and Remote Sensing by SatheeshGopi,
R.Sathikumar and N. Madhu, Pearson publication
7. Surveying Vol. 2 by S. K. Duggal, McGraw Hill Publication
8. Remote sensing & image interpretation, Lillesand& Kiefer, John Wiley Pub.
9. John K.C ., “Mechanical Workshop Practice”, PHI Learning Pvt. Ltd., New Delhi,2010
10. Bawa H.S., “Workshop Practice”, MC Graw Hill India, 2009
11. Lab Manual, Department of Chemical Engineering, Puducherry Technological University,
2024.
12. Electrical Wiring: An Introduction by Satheesh Kumar, Ane Books Pvt Ltd. 2022.
13. Electrical Wiring Handbook by Edward L. Safford. Jr, Tab Books Inc. 2021.
14. Study of Electrical Appliances and Devices by K.B . Bhatia – Khanna Publishers -1988.
15. Testing, Commissioning, operation and Maintenance of Electrical Equipments - Sunil S Rao,
Khanna Publishers 1991.
16. Hand book on Solar PV Installer designed by Skill Council for Green Jobs (SCGJ), Skill
India, National Skill Development Corporation, 2024.
17. Solar Photovoltaic Technology & Systems: A manual for Technicians, Trainers and
Engineers, Chetan Singh Solanki, PHI, 2013.

CO-PO Mapping
PO PO PO PO PO PO PO PO PO PO1 PO1 PO1 PSO PSO
1 2 3 4 5 6 7 8 9 0 1 2 1 2
CO 3 3 3 - - - - - - - - 3 - -
1
CO 1 - 1 1 - 1 1 - 2 1 - 1 - 1
2
CO 3 3 01 02
3
CO 3 3 2 1
4
Score: 3-High; 2-Medium; 1-Low
Department : Programme : B.Tech.
Semester : First/Second Course Category Code: Semester Exam Type:
SEC LB
Periods/Week Credi Maximum Marks
Course
Course Name t
Code
L T P C CA SE TM
GEUS102 Basic Engineering Skills
1 - 4 3 60 40 100
Laboratory - II
Prerequisite NIL
CO1 students will demonstrate proficiency in understanding and applying
principles of basic sensors and transducer, and will expertise proficiency in
understanding and applying techniques in the field of instrument calibration
CO2 Test and troubleshoot Regulated Power Supply, Audio Amplifier and Function
Course
Generator using Breadboard and PCB.
Outcome
CO3 Develop intuitive and responsive web pages Demonstrate Photoshop as a
At the end of
graphic designing tool and work with the text, graphics, and other effects that
the course
made designing easier.
students will
CO4 Demonstrate Photoshop as a graphic designing tool and work with the text,
be able to
graphics and other effects that made designing easier.

UNIT – I (Electronics and Instrumentation Engineering) Periods:15

1. a) Testing and troubleshooting in various types of sensors (thermocouples, RTDs, CO1
thermistor, pressure and level sensors) to understand their principles of operation and
characteristics.
2. Testing of level, flow, pH value , moisture and humidity ……etc.
3. Drone Design
4. Calibration of ammeter, volt meter and wattmeter. etc.
5. Calibration and testing of control valves, pressure switch, P-I &I-P converter and
temperature sensors
6. PCB Design .

UNIT-II (Electronics and Communication Engineering) Periods: 15

1. Familiarization of Electronics components, devices and equipment using demo model
2. Construction of half wave and full wave rectifier with and without filter and
measurement of ripple factor.
3. Construction of voltage regulator for varying line and load voltages.
4. Setting up of audio system using AF amplifier using tag board CO2
5. Construct, test and troubleshoot Audio Amplifier
6. PCB Design

UNIT-III (Computer Science and Engineering) Periods:15

1. A) Building a Wikipedia Clone website
1.1 Understanding the structure and layout of Wikipedia
1.2 Implementing navigation, content sections, and formatting
B) Design and Implement student course registration HTML form
CO3
2. Building E-commerce site
2.1 Wireframing and prototyping
2.2 Responsive design
2.3 Adopting CSS frameworks
3. Graphics
3.1 Installation of image editing software (e.g., GIMP, photoshop)
3.2 Basic image editing techniques (cropping, resizing, color adjustments)

UNIT-IV (Information Technology) Periods: 15

1: Basics of photoshop Tools:
Introduction to graphic design and Adobe Photoshop - Photoshop Pre-Settings - Photoshop
User Interface - Cropping an object/color corrections/setting up canvas size/Import and
Export file formats
2 Food/Tourism/ Event poster Design:
Layout, Background Design and Image editing for Poster Design - -Role of Typography in
CO4
Poster Design
3. Create customized Business cards with QR code:
Work with fonts, including size and type, colors, pen tool and QR code.
4 Robotics Design – I
5 Robotics Design – II
6: Study of parts of the system unit.
Lecture Periods: 15 Tutorial Periods: - Practical Periods: 60 Total Periods :75
Reference Books:
1. Paul Horowitz, Winfield Hill, The Art of Electronics, 3rd Edn., Cambridge university press, 2015.
2. C. Millman, Halkias and Satyabrata,”Electronic devices and Circuits”, Third edition, Mc GrawHill,
2010.
3. Data sheets of various electronic components
4.Jason Beaird, Alex Walker, James George, The Principles of Beautiful Web Design, SitePoint, 4th
Edition, September 2020.
5.Eugene Fedorenko, Designing in Figma, 1st Edition, January 2020.
6. Ernest Woodruff, “Adobe Photoshop for Beginners 2021: A Complete Step by Step Pictorial Guide
for Beginners with Tips & Tricks to Learn and Master All New Features in Adobe Photoshop 2021”,
Kindle Edition, 2021.
CO-PO Mapping
PO PO PO PO PO PO PO PO PO PO1 PO1 PO1 PSO PSO
1 2 3 4 5 6 7 8 9 0 1 2 1 2
CO
1
CO
3 2 2 ‒ 1 2 ‒ ‒ 2 ‒ ‒ 1 2 1
2
CO 2 - 3
- - - - - - - - - - -
3
CO 2 2 1 3 3 1
4
Score: 3-High; 2-Medium; 1-Low