HIGH PRESSURE CONTROL VALVES

PISTON BALANCED

APPLICATIONS: SPRINGS:
For discharge of liquid or gas from vessels, separators, treat- HPCV springs are available for diaphragm pressures of 15,
ers, knockouts and other similar liquid accumulators. 20, and 30 psig in the 2" valve and 30 psig in the 3" and 4" valve.
For back pressure or pressure reducing applications with Unless otherwise specified, all PISTON BALANCED HPCV’s
pressure pilots. will be furnished with 30 lb. springs.
Top Adjusting Screw may be adjusted to vary the spring ten-
FEATURES: sion slightly; this affects pressure required to actuate valve.
Compact design
Soft seat with metal to metal backup STEM TRAVEL:
Valve travel indicator 2" HPCV PB - 3/4" nominal
Field reversible topworks 3" HPCV PB - 13/8" nominal
Teflon packed stuffing box 4" HPCV PB - 13/4" nominal
Bubble tight shut-off 6" HPCV PB - 21/2" nominal
Piston balanced seat assembly 8" HPCV PB - 21/2" nominal
10" HPCV PB - 21/2" nominal
CERTIFICATIONS:
Canadian Registration Number (CRN): WORKING PRESSURE:
0C10903.24567890NTY (2" HPCV PB) 2" HPCV PB - 1500, 4000 psig
0C15019.24567890NTY (3"-10" HPCV PB) 3" HPCV PB - 1500 psig
4" HPCV PB - 1500 psig
TOPWORKS: 6" HPCV PB - 1500 psig
Unless otherwise specified, all HPCV’s will be furnished with 8" HPCV PB - 1500 psig
ductile topworks. 10" HPCV PB - 1500 psig
Effective diaphragm area:
2" HPCV PB - 65 square inches STANDARD TRIM SPECIFICATIONS:
3" HPCV PB -100 square inches 316 stainless steel cage
4" HPCV PB -100 square inches D-2 tool steel valve plug assembly
6" HPCV PB -120 square inches D-2 tool steel seat
8" HPCV PB -120 square inches Polyurethane seal with Metal-to-Metal back-up
10" HPCV PB -120 square inches (Other material available on request)

ACTUATOR WORKING PRESSURE: Cf & Cv VALUES

15-30 psig normal (see spring ranges) Line Size Flow Characteristic Trim Size Cf Cv
45 psig maximum 1 1/2" 0.75 28.6
2" Equal Percentage
2" 0.76 57.0
2" 0.75 52.6
3" Equal Percentage
Control Valve Diaphragm Assembly 3" 0.76 107.0
Control Valve Diaphragm Pressure 3" 0.75 115.0
Upstream Pressure
4" Equal Percentage
4 3/8" 0.75 222.0
Downstream Pressure 4 3/8" 0.75 222.0
6" Equal Percentage
6 3/4" 0.75 431.0
Reduced EP 6" 0.75 453.0
Spring 8" Refined EP 8 1/2" 0.75 630.0
Modified EP 1 8 1/2" 0.75 810.0
Reduced EP 6" 0.75 655.0
10" Refined EP 8 1/2" 0.75 884.0
Modified EP 1 8 1/2" 0.75 1091.0
1
Standard Trim Configuration

Control Valve
Diaphragm
Travel
Indicator

Yoke

Stuffing Box
Assembly

Piston and
Seat

Kimray is an ISO 9001- certified manufacturer.

Current Revision: E1:15.1
Change "Trim Type" to "Flow Characteristic" www.kimray.com Issued 12/17
 HIGH PRESSURE CONTROL VALVES
PISTON BALANCED
6" STEEL BODY DUCTILE TOPWORKS
O Ring 2632 *
Adjusting Screw 5348
InnerSpring 5314, PO Only
Pivot 5349
OuterSpring 5353
Spring Plate 5350
Sleeve 5309
Breather Plug 5559SS6
Plate 5343
Diaphragm 5315
Screw 191, 24 Req'd.
Nut 241, 24 Req,d.
Bonnet 5299
Ring 5344
O Ring 5355 *
Spring Plate 5350

* Wiper 5337, 2 Req’d. O Ring 2632 *

Screw 7534, 2 Req'd. Lower Adjusting Screw 5351

Retainer 5338 Snap Ring 5311 *

Indicator 5317 Upper Stem 5310

Scale 5316 Block 5345

with 5392 Screws, 2 Req'd.
Yoke 5300 Snap Ring 5311 *
Tag 5352
Stuffing Box 5346SS6
Retainer 5338
Packing Sleeve 5341 *
Screw 5406, 4 Req'd.
Packing Ring 5339, 8 Req'd. *
* Wiper 5337, 2 Req’d.
Follower 5340SS6
Screw 5323, 12 Req'd.
Spring 5347
Upper Housing 5301
Cage 5430SS6
* O Ring 2081
Quad Ring 5318Q *
* O Ring 2353, 2 Req'd.
Piston Seat 6722
* Backup 5321T, 2 Req'd.

Piston Assy. 6723ASS6 O Ring 5319 *

* O Ring 1151 Seat 5375SS6

6" I.V. 5313

* O Ring 6725 Ratio Plug
4" I.V. 6425
* Seal Ring 5387P Screw 5354SS6

Bodies Available
BODY FLANGED
TYPE SIZE BODY ANSI CLASS
6" 6429 150 RF
THRU 6" 5302 300 RF
6" 5322 600 RF

THRU VALVES AVAILABLE: NOTES:

CAT. SIZE MAX NOTE: All standard HPCV’s have a Cat. No. Seats, stems,
NO. TYPE VALVE W.P. KIT cages, stuffing boxes and valve bodies are available in 316 stain-
less steel. Inner valves can be made from a wide selection of
EIG 6" FLGD. 6150 FMT PB 150 RFab 6 IV 285 RWD
materials. Specify when ordering.
EIA 6" FLGD. 6150 FMT PB 300 RFab 6 IV 740 RWD
Dimensions refer to E1:100.3
EIB 6" FLGD. 6150 FMT PB 600 RFab 6 IV 1480 RWD
For BOTTOM WORKS only refer to Bulletin No. E105355
For working pressure vs. working temperature see ASME B16.34;
a
For TOP WORKS only refer to Bulletin No. E106024
For flanges & flanged fittings see ASME B16.5.
*These are recommended spare parts and are stocked as repair
kits.
Kimray is an ISO 9001- certified manufacturer.
Current Revision: E1:15.5
Add 150RF option www.kimray.com Issued 3/20
HIGH PRESSURE CONTROL VALVES
PISTON BALANCED CAGE ASSEMBLIES

VALVE INNER
MATERIAL ELASTOMERS SEAT RATIO PLUG CATALOG CODE
LINE SIZE VALVE SIZE
D-2 STEEL BUNA-N 6464 4720 EFB
D-2 STEEL AFLAS 6464 4720 EFBAF
D-2 STEEL VITON 6464 4720 EFBV
S6 BUNA-N 6464SS6 4720SS6 EFBSS6
2" S6 AFLAS 6464SS6 4720SS6 EFBS6AF
S6 VITON 6464SS6 4720SS6 EFBS6V
17-4PH BUNA-N 6464PH 4720PH EFBPH
S6 HSN 6464SS6 4720SS6 EFBS6HSN
2"
ZIRCONIA BUNA-N 6464 4720 EFBZR
D-2 STEEL / S6 BUNA-N 6464 6672SS6 EFBQOV
2" QUICK OPENING
D-2 STEEL / ZIRCONIA BUNA-N 6464 6641ZR EFBQOZR
D-2 STEEL BUNA-N 6464 4927 EFR
S6 BUNA-N 6464SS6 4927SS6 EFRSS6
1 1/2" S6 AFLAS 6464SS6 4927SS6 EFRS6AF
S6 HSN 6464SS6 4927SS6 EFRS6HSN
ZIRCONIA BUNA-N 6464 4927 EFRZR
D-2 STEEL BUNA-N 6465 4985 EFC
S6 BUNA-N 6465SS6 4985SS6 EFCSS6
S6 VITON 6465SS6 4985SS6 EFCS6V
17-4PH BUNA-N 6465PH 4985PH EFCPH
3"
S6 AFLAS 6465SS6 4985SS6 EFCS6AF
S6 HSN 6465SS6 4985SS6 EFCS6HSN
D-2 STEEL VITON 6465 4985 EFCV
3"
ZIRCONIA BUNA-N 6465 4985 EFCZR
3" QUICK OPENING 17-4PH / D2 BUNA-N 6465PH 7094 EFCQOPH
D-2 STEEL BUNA-N 6465 5123 EHZ
D-2 STEEL VITON 6465 5123 EHZV
2" S6 BUNA-N 6465SS6 5123SS6 EHZS6
S6 HSN 6465SS6 5123SS6 EHZS6HSN
S6 VITON 6465SS6 5123SS6 EHZS6V
D-2 STEEL BUNA-N 5583 5139 EFF
D-2 STEEL VITON 5583 5139 EFFV
S6 BUNA-N 5583SS6 5139SS6 EFFSS6
4"
S6 VITON 5583SS6 5139SS6 EFFS6V
S6 HSN 5583SS6 5139SS6 EFFS6HSN
4"
ZIRCONIA BUNA-N 5583 5139 EFFZR
D-2 STEEL BUNA-N 5583 5255 EVK
D-2 STEEL VITON 5583 5255 EVKV
3"
S6 BUNA-N 5583SS6 5255SS6 EVKS6
S6 VITON 5583SS6 5255SS6 EVKS6V
D-2 STEEL BUNA-N 5375SS6 5313 EFQ
6" S6 BUNA-N 5375SS6 5313 EFQS6
S6 AFLAS 5375SS6 5313SS6 EFQS6AF
S6 / D-2 STEEL BUNA-N 5375SS6 6425 MGE
6" S6 / D-2 STEEL AFLAS 5375SS6 6425 MGEAF
S6 / D-2 STEEL HSN 5375SS6 6425 MGEHSN
4"
S6 / D-2 STEEL VITON 5375SS6 6425 MGEV
S6 5375SS6 6425SS6 MGES6
S6 AFLAS 5375SS6 6425SS6 MGES6AF
S6 / D-2 STEEL BUNA-N 6570S6 6609 EIC
8" S6 BUNA-N 6570S6 6609SS6 EICS6
S6 HSN 6570S6 6609SS6 EICS6HSN
8" & 10"
S6 / D-2 STEEL BUNA-N 6570S6 6647 MGI
6" S6 BUNA-N 6570S6 6647SS6 MGIS6
S6 HSN 6570S6 6647SS6 HGIS6HSN
Kimray is an ISO 9001- certified manufacturer.
E1:80.2 Current Revision:
Issued 8/14 www.kimray.com
 HIGH PRESSURE CONTROL VALVES
FLANGED BODY DIMENSIONS

SIZE BODY STYLE A B C D E

150RF 7 1/4” 1 15/16" 10 1/2" 9 1/8"
150RTJ 7 5/8” 1 15/16" 10 1/2" 9 1/8"
300RF 7 3/4” 1 15/16" 10 1/2" 9 1/8"
300RTJ 8 1/8” 1 15/16" 10 1/2" 9 1/8"
1"
600RF 8 1/4” 1 15/16" 10 1/2" 9 1/8"
600RTJ 8 1/4” 1 15/16" 10 1/2" 9 1/8"
1500RF 10 3/4” 1 15/16" 10 1/2" 9 1/8"
1500RTJ 10 3/4” 1 15/16" 10 1/2" 9 1/8"
STANDARD 150RF 10" 3 3/16" 14 1/2" 12 7/8" 5"
150RTJ 10 3/8" 3 3/16" 14 1/2" 12 7/8" 5"
300RF 10 1/2" 3 3/16" 14 1/2" 12 7/8" 5 1/2"
300RTJ 11" 3 3/16" 14 1/2" 12 7/8" 5 1/4"
600RF 11 1/4" 3 3/16" 14 1/2" 12 7/8" 5 5/8"
2"
600RTJ 11 3/8" 3 3/16" 14 1/2" 12 7/8" 5 5/8"
1500RF 13 3/8" 3 3/16" 14 1/2" 12 7/8" 7 13/32"
1500RTJ 13 1/2" 3 3/16" 14 1/2" 12 7/8" 7 13/32"
2500RTJ 16 3/8" 3 3/16" 14 1/2" 12 7/8"
2 1/16 API 5,000 14 3/4" 3 3/16" 14 1/2" 12 7/8"
150RF 10" 5 5/8" 17" 12 7/8"
300RF 10 1/2" 5 5/8" 17" 12 7/8"
2" 600RF 11 1/4" 5 5/8" 17" 12 7/8"
1500RF 13 3/8" 5 5/8" 17" 12 7/8"
1500RTJ 13 1/2" 5 5/8" 17" 12 7/8"
150RF 11 3/4" 7 1/4" 27" 15 3/4"
300RF 12 1/2" 7 1/4" 27" 15 3/4"
3"
600RF 13 1/4" 7 1/4" 27" 15 3/4"
600RTJ 13 3/8" 7 1/4" 27" 15 3/4"
150RF 13 7/8" 11" 30" 15 3/4"
PISTON
4" 300RF 14 1/2" 11" 30" 15 3/4"
BALANCED
600RF 15 1/2" 11" 30" 15 3/4"
150RF 17 3/4" 11 3/16" 34 1/2" 20 7/16"
6" 300RF 18 5/8" 11 3/16" 34 1/2" 20 7/16"
600RF 20 1/16" 11 3/16" 34 1/2" 20 7/16"
150RF 21 3/8" 11 5/16" 34 1/2" 20 1/2"
8" 300RF 22 3/8" 11 5/16" 34 1/2" 20 1/2"
600RF 24" 11 5/16" 34 1/2" 20 1/2"
150RF 26 1/2" 11 5/16" 34 1/2" 20 1/2"
10" 300RF 27 7/8" 11 5/16" 34 1/2" 20 1/2"
600RF 29 9/16" 11 5/16" 34 1/2" 20 1/2"

Current Revision: E1:100.3

Add 2-16 API flange www.kimray.com Issued 7/19