Scribd
Upload
77 views2 pages

De PD 11

The DREW Air Diaphragm Pump System is a pneumatic diaphragm pump designed for circulating and transferring marine products, suitable for various cleaning applications. It features a 3-way suction valve for safe circulation and requires minimal maintenance. Key specifications include a maximum flow rate of 7.9 M^3/hr and a tank capacity of 100 liters.

Uploaded by

KleinerOthMárquez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
77 views2 pages

De PD 11

The DREW Air Diaphragm Pump System is a pneumatic diaphragm pump designed for circulating and transferring marine products, suitable for various cleaning applications. It features a 3-way suction valve for safe circulation and requires minimal maintenance. Key specifications include a maximum flow rate of 7.9 M^3/hr and a tank capacity of 100 liters.

Uploaded by

KleinerOthMárquez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Chemical Feed Equipment

DREW™ Air Diaphragm Pump System


Description
The DREW Air Diaphragm Pump System is a pneumatic driven
diaphragm pump and tank set. It is suitable for circulating and
transferring various marine products.

The unit is suitable for introducing cleaning products from


the smallest heat exchanger to the largest diesel jacket system,
propulsion boiler, or tank. The system may also be used for
circulating cleaning solutions through evaporators and small
heat exchangers or for stripping tanks and bilges. The 3-way
suction valve design allows for system circulation without the
risk of tank overflow or it can be externally piped to provide
system return to the tank.

The unit is rugged and requires little maintenance.

Applications
Chemical Cleaning:
• SAF-ACID™ descaling compound
• DESCALE-IT™ liquid acid descaler
• TC#4™ tank cleaner
• HDE-777™ heavy-duty emulsifier
• CARBON REMOVER™ solvent cleaner
• ENVIROMATE® 2000 general-purpose cleaner
• AMEROID® RSR rust stain remover
• ACC-9™ air cooler cleaner P/C #1AA8981
• FERROCLEAN® cleaning treatment
• O&GR™ oil and grease remover
• AMEROID OWS quick separating degreaser
• EDGE® heavy-duty cleaner
• LAC™ liquid alkaline cleaner
• DREWCLEAN® 2000 quick-breaking degreaser
• SNC™ 2000 carbon remover

Specifications
Air Pressure Required: 1.3-7 bar (20 psi-100 psi)
Air Consumption: 0.1-85 M^3/hr
(0.1-50 Ft^3/min)
Max Flow Rate: 7.9 M^3/hr (35 GPM)
Max Discharge Press: 6.9 bar (100 psi)
Max Suct Lift: 6.1 mtr (20 ft)
Tank Capacity: 100 ltr (26 gal)
Continued on page 2

®
Registered trademark, TMTrademark, Drew Marine
1
Registered trademark of Prominent Dosiertechnik GmbH
©
2009 Drew Marine • All Rights Reserved • DE-PD-11 (9/09)R3
www.drew-marine.com

All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability
or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and
verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not
recommendations to infringe on any patent.

DREW MARINE • One Drew Plaza, Boonton, NJ 07005 USA • Tel: (1-973) 263-7600 • Fax: (1-973) 263-4491
DE-PD-11 (9/09)R3

You might also like