R E V I S I O N

NOTES: UNLESS OTHERWISE SPECIFIED REV. DRAWN BY ECO No DESCRIPTION DATE APPROVED
1. CORNERS DRAWN SHARP TO BE R.005 MAXIMUM. 1 M BOYER PRELIMINARY RELEASE 08-Jul-04 D.C.
2 M BOYER RELEASED 09-Jul-04 D.C.
2. EXTERIOR SURFACE TEXTURE TO BE LIGHT EDM FINISH.
EQUIVELANT TO MT-11010. 3 M BOYER MODIFIED BATTERY COMPARTMENT 06-Aug-04 D.C.
3. INTERIOR SURFACE TEXTURE TO BE: NONE. 4 M BOYER 0208 UPDATE FORMAT 15-May-08 D.C.
4. ALL INSIDE RADII .010R. UNLESS OTHERWISE SPECIFIED. 5 M BOYER 4209 REDUCE SIZE OF ASSEMBLY SCREW HOLE ON BASE 04-Nov-09 D.C.
5. ALL EXTERNAL DIMENSIONS AFFECTED BY THE DRAFT APPLY AT
5.1 M BOYER 0710 UPDATE FORMAT 26-Mar-10 D.C.
THE LARGE END OF THE FEATURE, AND ALL INTERNAL FEATURES 5.2 M BOYER 0412 ADD NYLON WASHER TO BOM 13-Feb-12 D.C.
AFFECTED BY THE DRAFT APPLY AT THE SMALL END OF THE
FEATURE UNLESS OTHERWISE SPECIFIED. 5.3 M BOYER 04715 CHANGE ASSY SCREW FROM #6x.250 TO #4x.500 2015-Nov-04
6. 1 DEGREE DRAFT IN THE DIRECTION OF PULL IS PERMISSIBLE UNLESS
OTHERWISED SPECIFIED.
7. MATERIAL / COLOR: ABS PLASTIC IS STANDARD IN BLACK OR WHITE.
CUSTOM MATERIALS AND COLORS ARE AVAILABLE UPON REQUEST FOR QUOTE.
8. PCB SIZES ARE RECOMMENDATIONS ONLY. FINAL SIZES AND 5
VERIFICATION OF IT'S FIT ARE THE SOLE RESPONSIBILITY OF
EACH OWNER.
9. STANDARD OR CUSTOM LABEL RECESSES ARE AVAILABLE UPON 2
REQUEST FOR QUOTE.
10. ASSEMBLY SCREWS PROVIDED. PCB SCREWS AND BATTERY
CONTACTS ARE SOLD SEPERATELY. 4
11. BATTERY CLIPS AVAILABLE. ASK REP. FOR DETAILS
12. HARDWARE CALLOUT:
a) ASSY BOSS - 4ea .500" #4 HI-LOW SCREW
b) PCB BOSS - 4ea .187" #4 HI-LOW SCREW (Not Included)
c) BATTERY HATCH - 1ea 4-40 BRASS INSERT
1ea 4-40 FLATHEAD SCREW
1ea #2 RETAINER WASHER
10

11

11 WASHER_91755A2 WASHER NYLON RETAINING #2 NYLON WHITE 1

EXPLODED VIEW
10 BATTERY_AA BATTERY - CUSTOMER SUPPLIED SIZE "AA" REFERENCE 4
SCALE 0.500 1
9 SM_CLIP ACC-AACLIP-209 STEEL NICKEL PLATED 2
8 LG_CLIP ACC-AACLIP-210 STEEL NICKEL PLATED 3
7 SCREW_HILO-NO4X500 #4 HiLo x .500" SCREW ZINK PLATED INCLUDED 4 THIRD ANGLE PROJECTION TOLERANCES: UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN U.S. INCHES.
6 784114_HATCH 784114 HATCH - STANDARD ABS BLACK or WHITE 1 X.XX = .015 X.XXXX = .001
X.XXX = .010 X.X° = 1°
5 784114_COVER 784114 COVER - STANDARD ABS BLACK or WHITE 1
DO NOT SCALE DRAWING NEW AGE ENCLOSURES 2240 South Thornburg Street Santa Maria, CA. 93455
4 784114_BASE 784114 BASE - STANDARD ABS BLACK or WHITE 1 ph. (805) 595-1310 fax (805) 595-1024
3 4-40_INSERT PEM STKB-440-8 STK SERIES INSERT 4-40 x .250" 1
NOTICE: THE INFORMATION AND DATA
CONTAINED HEREIN IS CONSIDERED
Customer's Part No: 784114 www.newageenclosures.com
PROPRIETARY TO ALLTEC INTEGRATED

LRG HANDHELD - STANDARD

APPROVAL BY DATE
2 784114_PCB 784114 PCB - REFERENCE CUSTOMER SUPPLIED .062" THICK 1 MFG INC & SHALL REMAIN THE EXCLUSIVE
PROPERTY OF ALLTEC INTEGRATED MFG INC
CHECK
THE HOLDER WILL ASSUME CUSTODY AND
1 4-40_FLAT-HEAD-SCREW 4-40 FLAT HEAD 4-40 FH x .312" - 1
SXX-784114-XXX
CONTROL THAT THIS DOCUMENT WILL
NOT BE COPIED, REPRODUCED, OR ENG.
DISCLOSED WITHOUT THE EXPRESS WRITTEN
SCALE AS NOTED
ITEM FILE NAME DESCRIPTION MATERIAL COLOR QTY. CONSENT OF ALLTEC INTEGRATED MFG INC
POSSESSION OF THIS DOCUMENT DOES
NOT CONSTITUTE A GRANT TO DRAWN BY SIZE DRAWING NAME SHEET REV.DOC

BILL OF MATERIALS A 5.3

MANUFACTURE ANY ITEMS.
© 2017 M BOYER 2004-Jul-08 784114_R5_3 1 OF 7
COVER LABEL AREA 3.250
4.100 BASE LABEL AREA
AVAILABLE FOR
CUSTOM TOOLING AVAILABLE FOR
6.58" x 3.15" 3.150 CUSTOM TOOLING 1.625
3.25" X 3.25"
A

R.188

.755
.320

3.250

7.875 .250

6.575

.830

2.760

SECTION A-A
SCALE 0.500 A 2.505

TOLERANCES: UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN U.S. INCHES.
X.XX = .015 X.XXXX = .001
X.XXX = .010 X.X° = 1°
.990 NEW AGE ENCLOSURES 2240 South Thornburg Street Santa Maria, CA. 93455
1.477 ph. (805) 595-1310 fax (805) 595-1024
Customer's Part No: 784114 www.newageenclosures.com
LRG HANDHELD - STANDARD
APPROVAL BY DATE
CHECK
ENG.
SCALE AS NOTED SXX-784114-XXX
.465 DRAWN BY SIZE DRAWING NAME SHEET REV.DOC
M BOYER 2004-Jul-08 A 784114_R5_3 2 OF 7 5.3
 784114 COVER

A .249
.100
.990

.078

3.400

7.875

3.400

SECTION A-A
A 1.600 1.600

SCALE 0.500 LABEL AREA RECESS

AVAILABLE .020 DEEP

TOLERANCES: UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN U.S. INCHES.
X.XX = .015 X.XXXX = .001
X.XXX = .010 X.X° = 1°
NEW AGE ENCLOSURES 2240 South Thornburg Street Santa Maria, CA. 93455
ph. (805) 595-1310 fax (805) 595-1024
Customer's Part No: 784114 www.newageenclosures.com
4.100
LRG HANDHELD - STANDARD
APPROVAL BY DATE
CHECK
ENG.
SCALE AS NOTED SXX-784114-XXX
DRAWN BY SIZE DRAWING NAME SHEET REV.DOC
M BOYER 2004-Jul-08 A 784114_R5_3 3 OF 7 5.3
 784114 BASE 4-40 BRASS INSERT

.125
.855
1.600 1.600 .465 2.310
4X .311 .100
A
P P

2.315
3.400

.025
.249 4x 2.245

.093
(4X .320)
3.400

2X 3.025

.100

SECTION A-A (R.188) OPTIONAL

LABEL RECESS
A x .020 DEEP
BRASS INSERTS AVAILABLE SCALE 0.500
AT PCB STANDOFFS
3.100 ASK REP FOR DETAILS
TOLERANCES: UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN U.S. INCHES.
X.XX = .015 X.XXXX = .001
X.XXX = .010 X.X° = 1°
.200
NEW AGE ENCLOSURES 2240 South Thornburg Street Santa Maria, CA. 93455
ph. (805) 595-1310 fax (805) 595-1024
Customer's Part No: 784114 www.newageenclosures.com
LRG HANDHELD - STANDARD
APPROVAL BY DATE
CHECK

SECTION P-P
ENG.
SCALE AS NOTED SXX-784114-XXX
.270 -4° DRAFT/SIDE DRAWN BY SIZE DRAWING NAME SHEET REV.DOC
M BOYER 2004-Jul-08 A 784114_R5_3 4 OF 7 5.3
 784114 BATTERY HATCH
2.495

.050 .750

.290

1.375

2.750
.075 3.035

SCALE 1.000

.150 .187 1.250

R.693

.145

TOLERANCES: UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN U.S. INCHES.
X.XX = .015 X.XXXX = .001
X.XXX = .010 X.X° = 1°
NEW AGE ENCLOSURES 2240 South Thornburg Street Santa Maria, CA. 93455
ph. (805) 595-1310 fax (805) 595-1024
Customer's Part No: 784114 www.newageenclosures.com
LRG HANDHELD - STANDARD
APPROVAL BY DATE
CHECK
ENG.
SCALE AS NOTED SXX-784114-XXX
DRAWN BY SIZE DRAWING NAME SHEET REV.DOC
M BOYER 2004-Jul-08 A 784114_R5_3 5 OF 7 5.3
 784114 PCB - CUSTOMER SUPPLIED
PCB SIZES ARE RECOMMENDATIONS ONLY. FINAL
SIZES AND VERIFICATION OF IT'S FIT ARE THE
SOLE RESPONSIBILITY OF THE OEM.

5.950

4.638

1.326 2x

1.674 2x
.062
3.631

2.319

1.869

2.319
.000
1.825

1.550 2x
1.375
1.156
R.070 4x

.000

EXTENDED LEGS
NOT NESSESARY
DESIGNERS OPTION

1.156
1.375
1.550 2x

1.825

SCALE 1.000
.120 4x TOLERANCES: UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN U.S. INCHES.
X.XX = .015 X.XXXX = .001
X.XXX = .010 X.X° = 1°
NEW AGE ENCLOSURES 2240 South Thornburg Street Santa Maria, CA. 93455
ph. (805) 595-1310 fax (805) 595-1024
Customer's Part No: 784114 www.newageenclosures.com
LRG HANDHELD - STANDARD
APPROVAL BY DATE
CHECK
ENG.
SCALE AS NOTED SXX-784114-XXX
DRAWN BY SIZE DRAWING NAME SHEET REV.DOC
M BOYER 2004-Jul-08 A 784114_R5_3 6 OF 7 5.3
 2nd OPERATION DETAILS
NEW AGE ENCLOSURES DELIVERS YOUR ENCLOSURE MARKET-READY WITH IN-HOUSE
CNC MACHINING, PAD PRINTING, ASSEMBLY, AND FULFILLEMENT.
ALL SURFACES AND AREAS ARE AVAILABLE FOR CNC ALTERATION BY NEW AGE ENCLOSURES
CALL (805) 595-1310 FOR PRICING AND SCHEDULE.
THE INSIDE RADIUS OF ANY MACHINED FEATURES SHOULD BE NO SMALLER THAN .031"

SCALE 0.500

TOLERANCES: UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN U.S. INCHES.
X.XX = .015 X.XXXX = .001
X.XXX = .010 X.X° = 1°
NEW AGE ENCLOSURES 2240 South Thornburg Street Santa Maria, CA. 93455
ph. (805) 595-1310 fax (805) 595-1024
SXX-784114X-XXX COVER - ABS, BLACK Customer's Part No: 784114 www.newageenclosures.com
STEP NO DESCRIPTION CUTTER FIXTURE ORIENTATION PROGRAM APPROVAL
CHECK
BY DATE
LRG HANDHELD - STANDARD
1-C-C1 SIDE T2 = .062" EM 118 SINGLE - ENG.
SCALE AS NOTED SXX-784114-XXX
2-C-C2 SIDE T2 = .062" EM 118 - - DRAWN BY SIZE DRAWING NAME SHEET REV.DOC

3-C-C3 SIDE T2 = .062" EM 118 - - M BOYER 2004-Jul-08 A 784114_R5_3 7 OF 7 5.3