Measuring & monitoring systems

Solutions for smart machines, factories & grids

Version 2025
Measuring & monitoring systems

Contents
Hardware Introduction A
Energy Meter B
Energy Analyser
C
Energy Logger
D
Current transformer
E
Sensors - u-sense
F
A comprehensive automation portfolio
G
Software Energy management software
H
A comprehensive software portfolio
I
Applications Applications in practice
J

Appendix Service and support V

X
Index Type / Index Order No.
Index
Addresses worldwide

3043800000 I
 Product overview

Hardware
Energy Meter – BasicLine Energy Meter – ValueLine Energy Analyser
Page B.2 Page B.14 Page C.2

MID
certifi
ed

• Measurement of the basic electrical signals • Detailed measurement of energy consumption • Integrated residual current monitoring
of an AC system • Voltage, current, power and energy visible at a • Measurement according to common standards
• Direct current measurement up to 100 A glance EN 50160, IEEE 519 or IEC 61000-2-4
• IEC 62053-21 • High scalability • DIN rail devices for basic requirements

Energy Logger Current Transformers Rogowski-Coil

Page D.2 Page E.2 Page E.20

• Integrated temperature measurement • Galvanically isolate primary and secondary circuit • Universal measuring and monitoring solution
• Integrated Modbus interface from each other • Easy configuration & status request
• Data memory up to 32 MB • Measuring in different measuring environments • DIN mounting possible

Sensors
u-sense vibration
Page F.2

• Retrofit solution for machine monitoring

• Analyze acceleration data (time and frequency)
• IP66 and Ex approved

II 3043800000
 Product overview

Comprehensive automation portfolio

u-remote – I/O Systeme IP20 u-control – Controls and edge devices IoT-Gateways
Page G.6 Page G.20 Page G.28

• Modular I/O system • M3000 / M4000: Multicore technology for • Flexible IoT integration
• Protection class IP20 independent installation of multiple run-time • Many PLC protocols are supported
• Various modules & fieldbus couplers systems
• M3000 with two CPU cores &
M4000 with 4 CPU cores
• u-control WL2000: Web-based // HTML5,
dual-core CPU, 512 MB RAM, with integrated
u-view – Touch Panels software
Page G.32

• Resitive & Multi-Touch

• Sizes 4.3“, 7“ and 10.1“ available
• Different case types / different designs

Software
ecoExplorer go ResMa®
Page H.4 Page H.6

• Collect and display measurement data • ResMa® Basic

• Simple commissioning Analyze data – Plan optimizations
• Quick insight for efficient energy management • ResMa® Packages
ResMa® Energy
ResMa® Production
ResMa®Regression Analysis
ResMa® Recipe Management
ResMa® Import

3043800000 III
 Product overview

Comprehensive software portfolio

PROCON-WEB Embedded Systems PROCON-WEB SCADA AutoML – Data analysis and
Page I.2 Page I.6 automated machine learning Page I.10

• Portable and easily configurable HMI and IIoT • Easy creation of modern user interfaces • ModelBuilder
solution • Dynamic web interface From Data to Model
• High performance with low resource requirements • User and rights management • ModelRuntime
• Compatible with devices featuring OPC-UA server, • Ideal for control systems or complex digitalization Flexible Deployment in the Cloud
Modbus interface, Codesys PLCs, and u-OS PLCs tasks
• Dynamic web interface

u-link Page I.16

• Secure remote access and remote diagnostics

• Condition monitoring and status reporting
• Individual system management
• Low configuration effort

Service and support

Service connects – worldwide Digital ordering options
Page V.2 Page V.10

• Service connects – worldwide Purchasing made easy:

• Engineering services and customised products • Weidmüller eShop
• easyConnect – Your Industrial Service Platform • OCI interface
• Support Center • EDI interface
• Additional support services
• Weidmüller Configurator

IV 3043800000
 Contents

Introduction

Introduction
Introduction Industrial IoT with measuring and monitoring systems A.2
A
Total Energy Monitoring A.4

Efficient solutions for the energy transition A.6

3043800000 A.1
 Industrial IoT with measuring and monitoring systems

Industrial IoT with measuring and monitoring systems

Introduction

A
The way to Industrial IoT does not have to be complicated. linking and evaluation of the collected information – the data
No matter whether access to valuable data is required or if analysis – is based.
new, data-related services are to be generated, Weidmüller One thing is clear: digitalisation is not an end in itself. The
offers components and services for easy access to the added value is exploited in the specific use case, whether
Industrial IoT. this is the collection of process data, energy management,
ensuring availability with condition monitoring or deploying
With the comprehensive, future-oriented and coordinated service technicians more efficiently thanks to remote
IoT-capable portfolio, the path to the Industrial IoT can be maintenance. And last but not least, new business models
a successful one – „enabler from data to value“ – both for can be created by using artificial intelligence without having
greenfield and brownfield applications. The solutions from to be a data scientist – Weidmüller is designing the digital
the areas of data acquisition, data pre-processing and data transformation both with and for the user: it‘s simple and
communication form the infrastructure on which the logical efficient.

Industrial Internet of Things (IIoT) is increasingly permeating the production

I nterconnection of 15 billion
▼

communication-capable machines

 omponents of the advancing

C
▼

automation and digitalization process

 redictive Maintenance and

P
▼

Energy Monitoring

A.2 3043800000
 Industrial IoT with measuring and monitoring systems

Industrial IoT, Data Acquisition & Energy Management

Product Portfolio

Introduction
A
Holistic Offering for Industrial Data Acquisition

Software Solutions
• ResMa® – Resource Manager Data Analysis &

Engineering & Services

• u-create visu / Business Logic
PROCON WEB

Communication
• IoT Gateway Data
• PROCON-CONNECT Communication
Services
• Measuring concepts
Automation • Application engineering
• u-control and I/O modules Data • Data services
• HMI Preprocessing
• Engineering tools

Measurement
• Energy Meter and Analyser Data
• Transformers Acquisition
• Rogowski System

Target Applications

Energy • Manufacturing companies that want to improve energy efficiency

Monitoring (ISO 50001 – EN 16247-1)
& • Customers with trouble in grid quality as well as electromagnetic compatibility
Management • Improvement of plant availability by measuring residual currents
Industrial IoT with measuring
and monitoring systems

• Companies that want to improve and monitor their production (processes) as well as
Factory Data their manufacturing environment
Acquisition • Customers with need of condition monitoring or live visualization of production
• Automation and integration of different silo applications from different suppliers

• Machine builders that want to monitor their machines in the field

Machine Data • Machine integrators willing to improve their maintenance contract and offer new
Acquisition services for their end customers
• Data acquisition of different machine types with various PLCs

3043800000 A.3
 Total Energy Monitoring

Maximum energy efficiency and plant availability

Tap new potential with Total Energy Monitoring
Introduction

Seamless portfolio for plants of all sizes

A
Total Energy Monitoring is Weidmüller’s holistic modular
system for measuring and monitoring the power supply
network. Entire manufacturing energy networks can be Achieve full transparency of your manufacturing energy
continuously monitored and analysed in detail – even consumption. Manufacturing energy networks can be
remotely. fully monitored and analysed from the interconnection
point and sub-distribution all the way down to the individual
machine modules. You gain a better understanding of
Effectively maximise energy efficiency the process and more control over your energy costs and
and plant availability machine processes.

Climate change and dwindling resources are global The Weidmüller solution supports this optimisation process
megatrends that are increasingly influencing corporate with software and hardware components which can be
action. It also holds true that if you reduce energy costs, used flexibly. They are highly compatible, even when used
you increase profitability. In addition, high plant availability is in collaboration with already installed energy measurement
playing an increasingly prominent role for ensuring efficient systems and can be easily adjusted to individual application
production processes. These factors require a specific requirements. In short, you can always rely on a seamless
package of measurements that is individually tailored for production portfolio with optimum quality for all levels of
each company. production. The improved availability and efficiency of your
entire plant will quickly become noticeable.
With Total Energy Monitoring, Weidmüller has developed
an equally comprehensive and flexible product range for
individual solutions: hardware, software and consultancy
services are tailored to fulfil the purpose of the customer-
specific Energy Management solution. The concept
supports also the international ISO 50001 directive and
makes projects easier to plan and realise.

Expertise and awards

Weidmüller has a long tradition of energy efficiency.

During the time between receiving our first award, the
ASU Environmental Prize in 1990, and the German
Innovation Award in 2018, we have enjoyed decades
of pioneering work and development. An outstanding
example of accurate energy monitoring is our
production location in Detmold, which was awarded
the title of a climate protection company in 2013.
Implemented with our proprietary components, the
hardware in combination with the specialised software
provides the best prerequisites for successful energy
monitoring.

A.4 3043800000
 Total Energy Monitoring

Introduction
A

Shop floor Machine

Company
Network
Factory floor Machine module

Firewall Data
storage

Visualisation, monitoring On-site

and analysis using visualisation,
remote access monitoring and
analysis

Grid interconnection point

Energy and process data acquisition

Total Energy Monitoring

for all four levels of production

The Total Energy Monitoring concept ensures consistency flow rates, temperatures or pressures. Transferring the
from interconnection points in the factory, down the measurement data to a central data server allows for
production lines and individual machines and into the heart immediate access and prompt evaluation using the ResMa®
of the machine processes. software.

The solution allows you to monitor current and energy In addition the flexible remote maintenance solution u-link
measurement data as well as other process data relevant is available which provides the ability to communicate
for energy monitoring within your entire concept, such as from remote into the machine module level.

3043800000 A.5
 Efficient solutions for the energy transition

Pioneering energy solutions

Efficient solutions for the energy transition
Introduction

A
Smart Industrial Connectivity: Electrification, automation, digitalisation, electrical
connectivity, electromobility and renewable energies - markets in which
Weidmüller is at home. Throughout its 170-year history, Weidmüller has been a
pioneer in innovative products, supporting and promoting technological and social
change. Sustainability is taking on an increasingly relevant role in this context. We
support the change with our products and solutions for the energy transition.
This applies in particular to our high-performance components for energy
measurement and energy monitoring systems.

Power generation
Wind energy
Maximum performance and availability of wind turbines
With many years of industry experience, Weidmüller is the expert for condition
monitoring, digitalisation, lighting and connectivity for the wind industry.
In addition to control cabinet components, we offer solutions for condition
monitoring of rotor blades and screw connections, complete LED systems for
the tower, nacelle and hub, as well as customised housing solutions. Further
information can be found on our website www.weidmueller.com/wind

Photovoltaics
Efficient installation and operation of photovoltaics
Weidmüller offers a wide range of combiner boxes, monitoring solutions
and components for ground-mounted photovoltaic systems and rooftop
systems to meet your individual requirements: Benefit from our many years
of experience in the photovoltaic industry, the know-how of our experts
and our global network. Further information can be found on our website
www.weidmueller.com/pv-solutions

A.6 3043800000
 Efficient solutions for the energy transition

Introduction
Power transmission and energy storage
A
Energy storage systems
Solutions and products for battery energy storage systems (BESS))
The storage of renewable energy contributes significantly to the optimal use
of this future-oriented energy source. With our industrial connectivity and
digitalisation solutions, we offer an extensive range of solutions for energy
storage systems. Be it for battery management, power back-up, connectivity
or Ethernet communication. Further information can be found on our website
www.weidmueller.com/energy-storage

Hydrogen
Unleash the power of hydrogen with us
From energy production to storage to consumption: the production and efficient
use of hydrogen is a multi-layered process requiring the close interlinking and
coordination of a large number of technical components. As a specialist in Smart
Industrial Connectivity, Weidmüller supports its customers around the world
with products, solutions and services. We offer specific solutions to support
the expansion of the hydrogen industry, including our condition monitoring
system for electrolyser stacks. Further information can be found on our website
www.weidmueller.com/hydrogen DC
ready
DC
DC Microgrids ready
The use of direct current technology in industrial plants makes an important
contribution to the energy transition and will become the new standard
in the years to come. This is because a DC-based microgrid achieves not DC
only a much higher level of energy efficiency, but also greater grid quality ready
and security of supply. As a pioneer in the research and development of
DC technology, we already offer an extensive range of DC ready solutions
and components. Further information can be found on our website
www.weidmueller.com/dc-microgrids

DC
ready
Energy utilisation
e-mobility
Charge for the change: Charging infrastructure for a sustainable future
Electric vehicles play a key role in the energy transition. Weidmüller offers
practical solutions for the implementation of charging infrastructure for the
private and commercial sector. Our AC SMART wallbox family allows easy,
app-controlled charging and can be connected to inverters and backend systems.
Our SMARTcharge load management system prevents peak loads when there
are several charging points. Our charging cables, accessories and components
complete our portfolio for a simple electrical installation. Further information can
be found on our website www.weidmueller.com/e-mobility

3043800000 A.7
Introduction

A.8 3043800000
 Contents

Energy Meter

Energy Meter
Energy Meter Introduction BasicLine B.2

Selection table B.6

Energy Meter – BasicLine B.8 B

Introduction ValueLine B.14

Selection table B.16

Energy Meter – ValueLine B.18

3043800000 B.1
 Introduction BasicLine

Accurate, reliable and cost-effective energy measurement

Universal meters with direct display in a modern design ​
Energy Meter

BasicLine is the measuring device portfolio for the Your special advantages:
cost-effective acquisition of basic electrical parameters in
low-voltage power networks. • Simple and reliable measurement of the basic electrical

B
parameters of an AC system.
The devices will measure and display all the fundamental • In addition to measurement via current transformers,
electrical parameters in a LCD. The portfolio includes devices direct current measurement up to 100A is also possible.
for one- or three-phase measurement. It is mounted on a • Bi-directional measurement for kW and kWh.
DIN rail or in the front panel. Several current measurement • Complies to the requirement of class 1 active energy
versions are available: either for 1A/5A current transformers measurement and conforms to IEC 62053-21 standards.
or for direct current measurement up to 100A. Depending
on the version, the measuring devices have an integrated
Ethernet or RS485 interface.

MID
certifi
ed

B.2
 Introduction BasicLine

Energy Meter
Simple and reliable measurement
Simple and reliable measurement of the basic
electrical parameters of an AC system.

Direct measurement up to 100A

In addition to measurement via 1A/ 5A current
transformers, direct current measurement up to
100A is also possible.

Bi-directional measuring for kW and kWh

Bi-directional energy meter for energy and
power measurement.

3043800000 B.3
 Introduction BasicLine

Precise and reliable consumption measurement

Our certified MID counters for billing
Energy Meter

B Discover our high-quality energy meters with MID approval! The MID is a
European directive that defines specific requirements for measuring instruments. MID
It guarantees the accuracy and reliability of measurements – especially for
certifi
electricity, gas and water. Our MID-compliant instruments fulfil the highest quality ed
standards and are ideal for reliable billing. Trust in the clear rules of the MID and
choose our tested energy meters!

Additional features of MID-certified energy meters:

• Measuring instruments with MID approval fulfil the legal

requirements for use in the billing of energy consumption.
This offers legal security for both the operator of the
measuring instruments and the end consumer.
• Measuring devices with MID certification meet high
quality standards. They provide reliable measurement
results and create trust among users.
• The MID creates clear rules for the European market.
Manufacturers and consumers benefit from uniform
guidelines.Vorgaben.

B.4 3043800000
 Introduction BasicLine

DC-Microgrids
DC current for sustainable applications with DC infrastructure

Energy Meter
Climate change, carbon neutrality and electromobility are topics not only affect us
B
not only in our private lives, but also as Weidmüller.

DC current is used in solar systems, for energy storage in batteries, for charging
electric cars and other applications. Many challenges also arise from a production
perspective.
In this regard, DC technology is seen as having great potential for the future. The
focus here lies, in particular, on the use of DC voltage to supply energy to industrial
plants, for example to optimise energy efficiency in production, but also to ensure
grid quality and security of supply – an important step towards climate-neutral
production.

Our solutions also include DC energy counters for measuring DC current and DC
current consumption.

For further information, technical specifications

or additional services, please visit our website:
www.weidmueller.com/dc-microgrids

Potentials of industrial DC power distribution

Energy efficiency Grid stability

Lower
Lowerconversion
conversionand
andtransport
transportlosses,
losses,use
useofofrecuperation,
recuperation,direct
directuse
useof NoAdditional
need for additional
investments
investments
for grid filtering
for gridand
filtering
compensation
and compensation,
can be
renewable
of renewable
energy
energy
sources
sources
as well
as well
as peak
as peak
power
power
reduction
reduction
through
through
the omitted
supportand
for the
existing
existing
gridsgrids
andare
prevention
supported andand
reduction
production
of production
losses due
usesuitable
of suitable
storage
storage
systems.
systems. to grid disturbances
losses due toareprevented
grid disturbances.
and reduced.

Resource efficiency Industrial smart DC grid

Reduction of copper consumption for cables and lower equipment costs Infrastructure for intelligent control of energy flows,
flows enables
offering advantages
andand
space
space
savings
savings
through
throughElimination
the elimination
of of
power
power
electronics.
electronics. ininenergy
energypurchasing
purchasingandandsupport
supportsformodular
modularmachine
machineconcepts.
concepts.

3043800000 B.5
 Selection table
Energy Meter

Type EM110-RTU-2P EM111-RTU-2P EM120-RTU-2P EM122-RTU-2P EM220-RTU-4DI2DO

Order No. 7760051002 7760051001 7760051004 7760051003 7760051005
Type of mounting DIN rail DIN rail DIN rail DIN rail Front panel mounting

B
Display LCD LCD LCD LCD LCD round diagram
MID approvals – – – – –
Technical Characteristics
Measuring range, Voltage L-N, AC
176…276 V 176…276 V 138…276 V 138…276 V 50…345 V
(without transducer)
Measuring range, Voltage L-L, AC
240…480 V 240…480 V 50…600 V
(without transducer)
Overvoltage category CAT II CAT II CAT III CAT III CAT III
Power supply voltage 176…276 V 176…276 V 85…275 V AC 138…276 V 75…270 V
Two wire • • – – –
Three wire – – • • •
Four wire – – • • •
Measurement accuracy for active energy
Class 1 Class 1 Class 0.5 Class 1 Class 0.5
(kWh, …/5 A)
Measuring accuracy for voltage 0.20% 0.20% 0.20% 0.20% 0.20%
Measuring accuracy for current 0.25% 0.20% 0.25% 0.25% 0.25%
Number of digital inputs – – – – 4
Number of digital outputs – – – – 2
Number of pulse outputs 2 2 2 2
Current measurement channel 1 1 3 3 3
Measurement of current without current transformers – up to 45 A – up to 100 A –
Interfaces
RS485 • • • • •
Protocols
Modbus RTU • • • • •
Modbus-Gateway – – – – –

B.6 3043800000
 Selection table

MID MID MID

certifie certifie certifie
d d d

Energy Meter
EM220-RTU-4DI2DO-GW EM111-RTU-2P-MID EM120-RTU-2P-MID EM122-RTU-2P-MID
7760051006 3099190000 3099200000 3099210000
Front panel mounting DIN rail DIN rail DIN rail

B
LCD round diagram LCD LCD LCD
– MID MID MID

50…345 V 176…276 V 138…276 V 138…276 V

50…600 V 240…480 V 240…480 V

CAT III CAT II CAT III CAT III
75…270 V 176…276 V 85…275 V AC 138…276 V
– • – –
• – • •
• – • •
Class 0.5 Class 1 Class 0.5 Class 1
0.20% 0.20% 0.20% 0.20%
0.25% 0.20% 0.25% 0.25%
4 – – –
2 – – –
2 2 2
3 1 3 3
– up to 45 A – up to 100 A

• • • •

• • • •
• – – –

3043800000 B.7
 Energy Meter – BasicLine

Energy meters for DIN rail mounting EM110-RTU-2P EM111-RTU-2P

Energy Meter

B
Technical data

Measurement range, voltage L-N, AC 176…276 V 176…276 V

Measurement range, voltage L-L, AC
Surge voltage category II II
Voltage supply
Three-wire system No No
Four-wire system No No
Measuring accuracy for voltage 0.5 % 0.5 %
Measuring accuracy for current 0.5 % 0.5 %
Measurement accuracy for active energy (kWh, /5 A) Class 1 (IEC 62053-21), Class B (EN 50470-3) Class 1 (IEC 62053-21), Class B (EN 50470-3)
Number of digital inputs 0 0
Number of digital outputs 0 0
Number of pulse outputs 2 2
Current-measuring channels 1 1
Max. current 5000 A 45 A
Interface RS485 RS485
Protocol Modbus RTU Modbus RTU
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
EM110-RTU-2P 1 7760051002 EM111-RTU-2P 1 7760051001
Note

B.8 3043800000
 Energy Meter – BasicLine

Energy meters for DIN rail mounting EM120-RTU-2P EM122-RTU-2P

Energy Meter
B
Technical data

Measurement range, voltage L-N, AC 138…276 V 176…276 V

Measurement range, voltage L-L, AC 240…480 V 240…480 V
Surge voltage category III III
Voltage supply 85…275 V AC
Three-wire system Yes Yes
Four-wire system Yes Yes
Measuring accuracy for voltage 0.5 % 0.5 %
Measuring accuracy for current 0.5 % 0.5 %
Measurement accuracy for active energy (kWh, /5 A) Class 0.5 Class 0.5
Number of digital inputs 0 0
Number of digital outputs 0 0
Number of pulse outputs 2 2
Current-measuring channels 3 3
Max. current 5000 A 100 A
Interface RS485 RS485
Protocol Modbus RTU Modbus RTU
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
EM120-RTU-2P 1 7760051004 EM122-RTU-2P 1 7760051003
Note

3043800000 B.9
 Energy Meter – BasicLine

Energy meters for front panel mounting EM220-RTU-4DI2DO EM220-RTU-4DI2DO-GW

Energy Meter

B
Technical data

Measurement range, voltage L-N, AC 50…345 V 50…345 V

Measurement range, voltage L-L, AC 50…600 V 50…600 V
Surge voltage category III III
Voltage supply 75…270 V AC, 100…380 V DC 75…270 V AC, 100…380 V DC
Three-wire system Yes Yes
Four-wire system Yes Yes
Measuring accuracy for voltage 0.5 % 0.5 %
Measuring accuracy for current 0.5 % 0.5 %
Measurement accuracy for active energy (kWh, /5 A) Class 0.5S (IEC 62053-22), Class 0.5 (IEC 61557-12) Class 0.5S (IEC 62053-22), Class 0.5 (IEC 61557-12)
Number of digital inputs 4 4
Number of digital outputs 2 2
Number of pulse outputs
Current-measuring channels 3 3
Interface RS485 RS485, Ethernet
Protocol Modbus RTU Modbus RTU, Modbus/TCP (Port 502), Modbus-Gateway
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
EM220-RTU-4DI2DO 1 7760051005 EM220-RTU-4DI2DO-GW 1 7760051006
Note

Accessories
Type Qty. Order No. Type Qty.
Qty. Order
OrderNo.
No.
EM220 BRACKET 1 3068970000 EM220 BRACKET 1 3068970000

Note

B.10 3043800000
 Energy Meter – BasicLine

Energy meters MID EM111-RTU-2P-MID EM120-RTU-2P-MID

Energy Meter
B
Technical data

Measurement range, voltage L-N, AC 176…276 V 3 x 230 V

Measurement range, voltage L-L, AC 400 V
Surge voltage category III
Voltage supply
Three-wire system No Yes
Four-wire system No Yes
Measuring accuracy for voltage 0.5 % 0.5 %
Measuring accuracy for current 0.5 % 0.5 %
Measurement accuracy for active energy (kWh, /5 A)
Number of digital inputs 0 0
Number of digital outputs 0 0
Number of pulse outputs 2 2
Current-measuring channels 1 3
Max. current 45 A 5000 A
Interface RS485 RS485
Protocol Modbus RTU Modbus RTU
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
EM111-RTU-2P-MID 1 3099190000 EM120-RTU-2P-MID 1 3099200000
Note

3043800000 B.11
 Energy Meter – BasicLine

Energy meters MID EM122-RTU-2P-MID

Energy Meter

B
Technical data

Measurement range, voltage L-N, AC 3 x 230 V

Measurement range, voltage L-L, AC 400 V
Surge voltage category III
Voltage supply
Three-wire system Yes
Four-wire system Yes
Measuring accuracy for voltage 0.5 %
Measuring accuracy for current 0.5 %
Measurement accuracy for active energy (kWh, /5 A)
Number of digital inputs 0
Number of digital outputs 0
Number of pulse outputs 2
Current-measuring channels 3
Max. current 100 A
Interface RS485
Protocol Modbus RTU
Note

Ordering data
Type Qty. Order No.
EM122-RTU-2P-MID 1 3099210000
Note

B.12 3043800000
 Energy Meter
B

3043800000 B.13
 Introduction ValueLine

Measuring energy consumption of production plants in detail

Weidmüller energy measuring devices make energy efficiency transparent
Energy Meter

Energy networks of industrial plants are complex. Our This gives you a quick overview of how the electrical energy
ValueLine energy meters make it possible to divide them into in your production facility is doing. This applies both in terms
manageable areas for convenient analysis of consumption of efficient use as well as quality, stability and availability.

B
and other energy parameters. Many companies want to
conserve energy sources, use energy more efficiently and But not every measuring device is suitable for every
maximize the availability of energy networks. application. You can select the adequate measuring device
for each of your plant components from our comprehensive,
This not only shows a sense of responsibility but is also modular device portfolio.
recommended for economic reasons. Weidmüller energy
measuring devices can do much more than just measure
the consumption of electrical energy. Among other things,
they are also suitable for determining basic parameters for
energy quality or for analyzing the currents of all conductors
individually and differentially - like our Energy Meter 750.

B.14 3043800000
 Introduction ValueLine

Energy Meter
Measurement data at a glance
In devices with integrated display, the essential

B
measurement data such as voltage, current,
power and energy can be conveniently read off
immediately

High scalability
Thanks to the extensive range of energy
measuring devices, you can divide the energy
networks of your production sites as precisely
as you like and carry out detailed measurements
per area

3043800000 B.15
 Selection table
Energy Meter

Type EM D370-CBM EM D650 EM 520 EM 535

24 230 24 230
Order No. 2540830000 2425490000 2500860000 2500880000 3008100000 3008130000
Type of mounting DIN rail DIN rail Front panel mounting Front panel mounting

B Display
Technical Characteristics
Measuring range, Voltage L-N, AC
LCD LCD LCD LCD

277 V 277 V 277 V 277 V

(without transducer)
Measuring range, Voltage L-L, AC
480 V 480 V 480 V 480 V
(without transducer)
Overvoltage category 300 V CAT III 300 V CAT III 300 V CAT III 300 V CAT III
Power supply voltage – 95 – 240 V AC; 135 – 340 V DC 24 – 90 V AC; 90 – 277 V AC; 24 – 90 V AC; 90 – 277 V AC;
24 – 90 V DC 90 – 250 V DC 24 – 90 V DC 90 – 250 V DC
Three wire – • • •
Four wire • • • •
Sampling frequency 50/60 Hz 5.4 kHz 20 kHz 21.33 / 25.6 kHz 21.33 / 25.6 kH
Measurement points per second 5.400 20.000 21.330 / 25.600 21.330 / 25.600
Measurement results per second 5 5 5 5
Measuring accuracy for voltage 0.20% 0.20% 0.20% 0.20%
Measuring accuracy for current 0.20% 0.25% 0.20% 0.20%
Number of digital inputs – 2 – –
Number of digital outputs – 2 2 –
Number of pulse outputs – 2 2 –
Current measurement channel 3 4 3 3
Temperature input – 1 – –
Memory size 4 MB Flash 4 MB Flash – –
Number of memory values 160 k 156 k – –
Interfaces
RS232 – • – –
RS485 • • • –
USB – – – –
Profibus DP – – – –
Ethernet – – – •
Webserver / E-Mail – – – –
Protocols
Modbus RTU • • • –
Modbus-Gateway – – – –
Profibus DP V0 – – – –
Modbus TCP/IP, Modbus RTU over Ethernet,
– – – •
SNMP
BACnet (optional) – – – –
Profinet – – – –

B.16 3043800000
 Selection table

Energy Meter
EM 610 EM 610 PB EM 750 EM 700 PN
24 230 24 230 24 230 24 230
2540920000 2540850000 2540860000 2540870000 2540900000 2540910000 2500870000 2500890000
Front panel mounting Front panel mounting Front panel mounting Front panel mounting
LCD LCD LCD
B
277 V 277 V 277 V 277 V

480 V 480 V 480 V 480 V

300 V CAT III 300 V CAT III 300 V CAT III 300 V CAT III
24 – 90 V AC; 90 – 277 V AC; 24 – 90 V AC; 90 – 277 V AC; 24 – 90 V AC; 90 – 277 V AC; 24 – 90 V AC; 90 – 277 V AC;
24 – 90 V DC 90 – 250 V DC 24 – 90 V DC 90 – 250 V DC 24 – 90 V DC 90 – 250 V DC 24 – 90 V DC 90 – 250 V DC
• • • •
• • • •
21.33 / 25.6 kHz 21.33 / 25.6 kHz 21.33 / 25.6 kHz 21.33 / 25.6 kHz
21.330 / 25.600 21.330 / 25.600 21.330 / 25.600 21.330 / 25.600
5 5 5 5
0.20% 0.20% 0.20% 0.20%
0.20% 0.20% 0.20% 0.20%
4 4 3 3
6 6 5 5
6 6 5 5
4 4 4+2 4+2
– – 2 2
256 MB 256 MB 256 MB –
10.000 k 10.000 k 10.000 k –

– – – –
• • • •
• • – –
– • – –
– – • •
– – •/• •/–

• • • •
– – • –
– • – –
– – • •
– – • –
– – – •

3043800000 B.17
 Energy Meter – ValueLine

Energy meters for DIN rail mounting Energy Meter 370-CBM

Energy Meter

B
Technical data

Measurement range, voltage L-N, AC 277 V

Measurement range, voltage L-L, AC 480 V
Surge voltage category 300 V CAT III
Voltage supply
Three-wire system No
Four-wire system Yes
Quadrants 4
Sampling frequency 50/60 Hz 5.4 kHz
Continuous measurements Yes
Effective value from the period (50/60 Hz) 10 / 12
Measurement result per second 5 ms
Residual current measuring No
Harmonics, per order / voltage 1.-25., odd
Harmonics, per order / current 1.-25., odd
Unbalanced No
Positive, negative and zero system Yes
Measuring accuracy for voltage 0.2 %
Measuring accuracy for current 0.2 %
Measurement accuracy for active energy (kWh, /5 A) Class 0.5S
Number of digital inputs 0
Number of digital outputs 0
Number of pulse outputs
Current-measuring channels 3
Temperature input No
Memory; minimum and maximum values Yes
Memory size 4 MB
Interface RS485: 9,6 – 115,2 kbps
Protocol Modbus RTU
Note

Ordering data
Type Qty. Order No.
ENERGY METER D370-CBM 1 2540830000
Note

B.18 3043800000
 Energy Meter – ValueLine

Energy meters for front panel mounting Energy Meter 520-24 Energy Meter 520-230

Energy Meter
B
Technical data

Measurement range, voltage L-N, AC 277 V 277 V

Measurement range, voltage L-L, AC 480 V 480 V
Surge voltage category 300 V CAT III 300 V CAT III
Voltage supply 24 - 90 V AC (50/60 Hz), 24 - 90 V DC 90 - 277 V AC (50/60 Hz), 90 - 250 V DC
Three-wire system Yes Yes
Four-wire system Yes Yes
Quadrants 4 4
Sampling frequency 50/60 Hz 25.6 kHz 25.6 kHz
Continuous measurements Yes Yes
Effective value from the period (50/60 Hz) 10 / 12 10 / 12
Measurement result per second 5 ms 5 ms
Residual current measuring No No
Harmonics, per order / voltage 1.-40. 1.-40.
Harmonics, per order / current 1.-40. 1.-40.
Unbalanced No No
Positive, negative and zero system Yes Yes
Measuring accuracy for voltage 0.2 % 0.2 %
Measuring accuracy for current 0.2 % 0.2 %
Measurement accuracy for active energy (kWh, /5 A) Class 0.5S Class 0.5S
Number of digital inputs 0 0
Number of digital outputs 2 2
Number of pulse outputs 2 2
Current-measuring channels 3 3
Temperature input No No
Memory; minimum and maximum values Yes Yes
Memory size
Interface RS485: 9,6 – 115,2 kbps RS485: 9,6 – 115,2 kbps
Protocol Modbus RTU Modbus RTU
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
ENERGY METER 520-24 1 2500860000 ENERGY METER 520-230 1 2500880000
Note

Accessories
Type Qty. Order No. Type Qty.
Qty. Order
OrderNo.
No.
DIN rail adapters ENERGY METER BRACKET S2 1 2433070000 ENERGY METER BRACKET S2 1 2433070000
Seal ENERGY METER SEAL L96-2 1 2495610000 ENERGY METER SEAL L96-2 1 2495610000
Fixing clamps ENERGY METER FIXING SET 1 2433030000 ENERGY METER FIXING SET 1 2433030000

Note

3043800000 B.19
 Energy Meter – ValueLine

Energy meters for front panel mounting Energy Meter 535-24 Energy Meter 535-230
Energy Meter

B
Technical data

Measurement range, voltage L-N, AC 277 V 277 V

Measurement range, voltage L-L, AC 480 V 480 V
Surge voltage category 300 V CAT III 300 V CAT III
Voltage supply 24 - 90 V DC, 24 - 90 V AC (50/60 Hz) 90 - 277 V AC (50/60 Hz), 90 - 250 V DC
Three-wire system Yes Yes
Four-wire system Yes Yes
Quadrants 4 4
Sampling frequency 50/60 Hz 25.6 kHz 25.6 kHz
Continuous measurements Yes Yes
Effective value from the period (50/60 Hz) 10 / 12 10 / 12
Measurement result per second 5 ms 5 ms
Residual current measuring No No
Harmonics, per order / voltage 1.-40. 1.-40.
Harmonics, per order / current 1.-40. 1.-40.
Unbalanced No No
Positive, negative and zero system Yes Yes
Measuring accuracy for voltage 0.2 % 0.2 %
Measuring accuracy for current 0.2 % 0.2 %
Measurement accuracy for active energy (kWh, /5 A) Class 0.5S Class 0.5S
Number of digital inputs 0 0
Number of digital outputs 0 0
Number of pulse outputs
Current-measuring channels 3 3
Temperature input No No
Memory; minimum and maximum values Yes Yes
Memory size
Interface Ethernet Ethernet
Protocol Modbus/TCP, Modbus RTU over Ethernet Modbus RTU over Ethernet, Modbus/TCP
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
ENERGY METER 535-24 1 3008100000 ENERGY METER 535-230 1 3008130000
Note

Accessories
Type Qty. Order No. Type Qty.
Qty. Order
OrderNo.
No.
DIN rail adapters ENERGY METER BRACKET L1 1 2433060000 ENERGY METER BRACKET L1 1 2433060000
Seal ENERGY METER SEAL L96-2 1 2495610000 ENERGY METER SEAL L96-2 1 2495610000
Fixing clamps ENERGY METER FIXING SET 1 2433030000 ENERGY METER FIXING SET 1 2433030000

Note

B.20 3043800000
 Energy Meter – ValueLine

Energy meters for front panel mounting Energy Meter 610-24 Energy Meter 610-230

Energy Meter
B
Technical data

Measurement range, voltage L-N, AC 277 V 277 V

Measurement range, voltage L-L, AC 480 V 480 V
Surge voltage category 300 V CAT III 300 V CAT III
Voltage supply 24 - 90 V AC (50/60 Hz), 24 - 90 V DC 90 - 277 V AC (50/60 Hz), 90 - 250 V DC
Three-wire system Yes Yes
Four-wire system Yes Yes
Quadrants 4 4
Sampling frequency 50/60 Hz 25.6 kHz 25.6 kHz
Continuous measurements Yes Yes
Effective value from the period (50/60 Hz) 10 / 12 10 / 12
Measurement result per second 5 ms 5 ms
Residual current measuring No No
Harmonics, per order / voltage 1.-40. 1.-40.
Harmonics, per order / current 1.-40. 1.-40.
Unbalanced No No
Positive, negative and zero system Yes Yes
Measuring accuracy for voltage 0.2 % 0.2 %
Measuring accuracy for current 0.2 % 0.2 %
Measurement accuracy for active energy (kWh, /5 A) Class 0.5S Class 0.5S
Number of digital inputs 4 4
Number of digital outputs 6 6
Number of pulse outputs 6 6
Current-measuring channels 4 4
Temperature input No No
Memory; minimum and maximum values Yes Yes
Memory size 256 MB 256 MB
Interface RS485: 9,6 – 115,2 kbps, USB RS485: 9,6 – 115,2 kbps, USB
Protocol Modbus RTU Modbus RTU
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
ENERGY METER 610-24 1 2540920000 ENERGY METER 610-230 1 2540850000
Note

Accessories
Type Qty. Order No. Type Qty.
Qty. Order
OrderNo.
No.
DIN rail adapters ENERGY METER BRACKET L1 1 2433060000 ENERGY METER BRACKET L1 1 2433060000
Seal ENERGY METER SEAL L96-2 1 2495610000 ENERGY METER SEAL L96-2 1 2495610000
Fixing clamps ENERGY METER FIXING SET 1 2433030000 ENERGY METER FIXING SET 1 2433030000

Note

3043800000 B.21
 Energy Meter – ValueLine

Energy meters for front panel mounting Energy Meter 610 PB-24 Energy Meter 610 PB-230
Energy Meter

B
Technical data

Measurement range, voltage L-N, AC 277 V 277 V

Measurement range, voltage L-L, AC 480 V 480 V
Surge voltage category 300 V CAT III 300 V CAT III
Voltage supply 24 - 90 V AC (50/60 Hz), 24 - 90 V DC 90 - 277 V AC (50/60 Hz), 90 - 250 V DC
Three-wire system Yes Yes
Four-wire system Yes Yes
Quadrants 4 4
Sampling frequency 50/60 Hz 25.6 kHz 25.6 kHz
Continuous measurements Yes Yes
Effective value from the period (50/60 Hz) 10 / 12 10 / 12
Measurement result per second 5 ms 5 ms
Residual current measuring No No
Harmonics, per order / voltage 1.-40. 1.-40.
Harmonics, per order / current 1.-40. 1.-40.
Unbalanced No No
Positive, negative and zero system Yes Yes
Measuring accuracy for voltage 0.2 % 0.2 %
Measuring accuracy for current 0.2 % 0.2 %
Measurement accuracy for active energy (kWh, /5 A) Class 0.5S Class 0.5S
Number of digital inputs 4 4
Number of digital outputs 6 6
Number of pulse outputs 6 6
Current-measuring channels 4 4
Temperature input No No
Memory; minimum and maximum values Yes Yes
Memory size 256 MB 256 MB
Interface RS485: 9,6 – 115,2 kbps, Profibus DP, USB RS485: 9,6 – 115,2 kbps, Profibus DP, USB
Protocol Modbus RTU, Profibus DP V0 Modbus RTU, Profibus DP V0
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
ENERGY METER 610-PB-24 1 2540860000 ENERGY METER 610-PB-230 1 2540870000
Note

Accessories
Type Qty. Order No. Type Qty.
Qty. Order
OrderNo.
No.
DIN rail adapters ENERGY METER BRACKET L1 1 2433060000 ENERGY METER BRACKET L1 1 2433060000
Seal ENERGY METER SEAL L96-2 1 2495610000 ENERGY METER SEAL L96-2 1 2495610000
Fixing clamps ENERGY METER FIXING SET 1 2433030000 ENERGY METER FIXING SET 1 2433030000

Note

B.22 3043800000
 Energy Meter – ValueLine

Energy meters for front panel mounting Energy Meter 700 PN-24 Energy Meter 700 PN-230

Energy Meter
B
Technical data

Measurement range, voltage L-N, AC 277 V 277 V

Measurement range, voltage L-L, AC 480 V 480 V
Surge voltage category 300 V CAT III 300 V CAT III
Voltage supply 24 - 90 V AC (50/60 Hz), 24 - 90 V DC 90 - 277 V AC (50/60 Hz), 90 - 250 V DC
Three-wire system Yes Yes
Four-wire system Yes Yes
Quadrants 4 4
Sampling frequency 50/60 Hz 25.6 kHz 25.6 kHz
Continuous measurements Yes Yes
Effective value from the period (50/60 Hz) 10 / 12 10 / 12
Measurement result per second 5 ms 5 ms
Residual current measuring Yes Yes
Harmonics, per order / voltage 1.-40. 1.-40.
Harmonics, per order / current 1.-40. 1.-40.
Unbalanced No No
Positive, negative and zero system Yes Yes
Measuring accuracy for voltage 0.2 % 0.2 %
Measuring accuracy for current 0.2 % 0.2 %
Measurement accuracy for active energy (kWh, /5 A) Class 0.5S Class 0.5S
Number of digital inputs 3 3
Number of digital outputs 5 5
Number of pulse outputs 5 5
Current-measuring channels 4+2 4+2
Temperature input Yes Yes
Memory; minimum and maximum values Yes Yes
Memory size
Interface RS485: 9,6 – 115,2 kbps, Ethernet, Web server RS485: 9,6 – 115,2 kbps, Ethernet, Web server
Protocol PROFINET, Modbus RTU, Modbus TCP/IP, Modbus RTU over Ethernet, PROFINET, Modbus RTU, Modbus TCP/IP, Modbus RTU over Ethernet,
SNMP SNMP
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
ENERGY METER 700-PN-24 1 2500870000 ENERGY METER 700-PN-230 1 2500890000
Note

Accessories
Type Qty. Order No. Type Qty.
Qty. Order
OrderNo.
No.
DIN rail adapters ENERGY METER BRACKET L1 1 2433060000 ENERGY METER BRACKET L1 1 2433060000
Seal ENERGY METER SEAL L96-2 1 2495610000 ENERGY METER SEAL L96-2 1 2495610000
Fixing clamps ENERGY METER FIXING SET 1 2433030000 ENERGY METER FIXING SET 1 2433030000

Note

3043800000 B.23
 Energy Meter – ValueLine

Energy meters for front panel mounting Energy Meter 750-24 Energy Meter 750-230
Energy Meter

B
Technical data

Measurement range, voltage L-N, AC 277 V 277 V

Measurement range, voltage L-L, AC 480 V 480 V
Surge voltage category 300 V CAT III 300 V CAT III
Voltage supply 24 - 90 V AC (50/60 Hz), 24 - 90 V DC 90 - 277 V AC (50/60 Hz), 90 - 250 V DC
Three-wire system Yes Yes
Four-wire system Yes Yes
Quadrants 4 4
Sampling frequency 50/60 Hz 25.6 kHz 25.6 kHz
Continuous measurements Yes Yes
Effective value from the period (50/60 Hz) 10 / 12 10 / 12
Measurement result per second 5 ms 5 ms
Residual current measuring Yes Yes
Harmonics, per order / voltage 1.-40. 1.-40.
Harmonics, per order / current 1.-40. 1.-40.
Unbalanced No No
Positive, negative and zero system Yes Yes
Measuring accuracy for voltage 0.2 % 0.2 %
Measuring accuracy for current 0.2 % 0.2 %
Measurement accuracy for active energy (kWh, /5 A) Class 0.5S Class 0.5S
Number of digital inputs 3 3
Number of digital outputs 5 5
Number of pulse outputs 5 5
Current-measuring channels 4+2 4+2
Temperature input Yes Yes
Memory; minimum and maximum values Yes Yes
Memory size 256 MB 256 MB
Interface RS485: 9,6 – 115,2 kbps, Ethernet, Web server/e-mail RS485: 9,6 – 115,2 kbps, Ethernet, Web server/e-mail
Protocol Modbus RTU, Modbus-Gateway, Modbus TCP/IP, Modbus RTU over Modbus RTU, Modbus-Gateway, Modbus TCP/IP, Modbus RTU over
Ethernet, SNMP, BACnet (optional) Ethernet, SNMP, BACnet (optional)
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
ENERGY METER 750-24 1 2540900000 ENERGY METER 750-230 1 2540910000
Note

Accessories
Type Qty. Order No. Type Qty.
Qty. Order
OrderNo.
No.
DIN rail adapters ENERGY METER BRACKET L1 1 2433060000 ENERGY METER BRACKET L1 1 2433060000
Seal ENERGY METER SEAL L96-2 1 2495610000 ENERGY METER SEAL L96-2 1 2495610000
Fixing clamps ENERGY METER FIXING SET 1 2433030000 ENERGY METER FIXING SET 1 2433030000

Note

B.24 3043800000
 Contents

Energy Analyser

Energy Analyser
Energy Analyser Introduction C.2

Selection table C.4

Energieanalysegeräte C.5

3043800000 C.1
 Introduction

Holistic analysis of the quality of electrical supply networks

Energy analyser for transparency and improved plant availability
Energy Analyser

Integrated monitoring of residual current

The built-in residual current measurement highlights creeping increases
in residual current before fuses or residual current detectors switch off the
section of the system. This maximizes operating times.

Large, clear display

The large QVGA colour display on the device clearly visualises all

C
measurement parameters and allows convenient adjustment of the
system parameters.

Top-hat rail devices for simple requirements

For less comprehensive measurements, we offer the Energy Analyser D550,
a very small device for installation on standard DIN rails.

The quality of the electrical network is an important parameter

for the effectiveness and availability of industrial plants and
production facilities. The Energy Analyser 750 is the first step
towards increased added value and is particularly suitable for
monitoring power quality according to common standards
such as EN 50160, IEEE 519 or IEC 61000-2-4.

An increasing number of non-linear consumers and plant With the Energy Analyser 750, you can carry out
components are being used in production facilities. They comprehensive checks on the quality of the electrical energy
have an impact on, for example, network frequency, phase in your production facility and initiate optimization steps to
shift and the amplitude of phases. This influences the quality maximize the effectiveness and availability of your plant.
of the electrical energy and thus the uptime of the plant. The Important events can be recorded as required.
new Energy Analyser 750 measures all quality parameters
of the electrical supply network, from the symmetry to
transients and many other parameters besides.

C.2 3043800000
 Introduction

Continuously monitoring voltage quality

Standard-compliant measurements with the Energy Analyser 750

Energy Analyser
($ ($

6XSSO\ 8 ,QIOXHQFH ,

(1 ,(& ,(&

5HVSRQVLELOLW\ 5HVSRQVLELOLW\ (0&VWDQGDUGV 0D[LPXP
RIWKHJULGRSHUDWRU RILQGXVWU\ WUDQVPLVVLRQLQWHUIHUHQFHYDOXHV

,(&VHULHV
5HVSRQVLELOLW\RIWKH
GHYLFHPDQXIDFWXUHU

Power quality – standards and guidelines

Within Europe, EN 50160 is the standard for describing It defines the immunity levels for voltage distortions that
the quality of an electrical power supply. The standard machinery and systems in industrial enterprises need to be
mainly describes the characteristics of the supply voltage able to withstand.
at the point of supply to the customer in public low If the level is exceeded, this may result in outages that the
and medium voltage networks under normal operating machinery or system supplier is not liable for. Monitoring
conditions. EN 50160 applies to the grid voltage, i.e. the in accordance with IEC 61000-2-4 is therefore advisable.
voltage measured at the point of connection with the grid. New standards such as EN 50600-2-2 for electrical systems
A voltage distortion in the public grid distorts the voltage in data processing centres also require voltage quality in
in the industrial grid, and should therefore be monitored accordance with EN 50160 and IEC 61000-2-4.
continuously.
The Energy Analyser 750 facilitates the comprehensive
The IEC 61000-2-4 standard defines numerical thresholds monitoring of specific parameters of voltage quality, and
for industrial and non-public electricity distribution systems supports compliance with all required standards.
with nominal voltages of up to 35 kV. The IEC 61000-2-4
standard should apply to the quality of the voltage at the
point of supply to the consumer. That is why it serves as the
basis for many product and machinery design standards.

3043800000 C.3
 Selection table
Energy Analyser

Type EA D550 EA 550 EA 750

24 230 24 230 24 230
Order No. 2425510000 2489780000 2602580000 2425500000 2534160000 2534130000
Type of mounting DIN rail Front panel mounting Front panel mounting
Display LCD Graphic Colour graphic
Technical Characteristics
Measuring range, Voltage L-N, AC
277 V 417 V 347 V
(without transducer)
Measuring range, Voltage L-L, AC
480 V 720 V (3 wire 600 V) 600 V
(without transducer)

C
Overvoltage category 300 V CAT III 600 V CAT III 600 V CAT III
Power supply voltage 20 - 50 V AC; 95 - 240 V AC; 48 - 110 V AC, 95 - 240 V AC; 48 - 110 V AC; 95 - 240 V AC;
20 - 70 V DC 135 - 340 V DC 24 - 150 V DC 80 - 300 V DC 24 - 150 V DC 80 - 300 V DC
Three wire • • •
Four wire • • •
Sampling frequency 50/60 Hz 20 kHz 20 kHz 25.6 kHz
Measurement points per second 20,000 20,000 25,600
Measurement results per second 5 5 5
Measuring accuracy for voltage 0.20 % 0.10 % 0.10 %
Measuring accuracy for current 0.25 % 0.20 % 0.10 %
Number of digital inputs 2 2 2
Number of digital outputs 2 2 2
Number of pulse outputs 2 2 2
Current measurement channel 4 4+2 4+2
Temperature input 1 1 1
Memory size 128 MB 256 MB 256 MB
Number of memory values 5.000 k 10.000 k 10.000 k
Interfaces
RS232 • - -
RS485 • • •
Profibus DP - • •
M-Bus - -
Ethernet • • •
Webserver / E-Mail •/• •/• •/•
Protocols
Modbus RTU • • •
Modbus-Gateway • • •
Profibus DP V0 - • •
Modbus TCP/IP, Modbus RTU over Ethernet,
• • •
SNMP
BACnet (optional) • • •

C.4 3043800000
 Energy Analyser

Energy analysis instruments Energy Analyser D550-24 Energy Analyser D550-230

Energy Analyser
Technical data

Measurement range, voltage L-N, AC 277 V 277 V

Measurement range, voltage L-L, AC 480 V 480 V

C
Surge voltage category 300 V CAT III 300 V CAT III
Voltage supply 20 ... 50 V AC ±10%, 20 ... 70 V DC ±10% 95 - 240 V AC, 135 - 340 V DC
Three-wire system Yes Yes
Four-wire system Yes Yes
Quadrants 4 4
Sampling frequency 50/60 Hz 20 kHz 20 kHz
Continuous measurements Yes Yes
Effective value from the period (50/60 Hz) 10 / 12 10 / 12
Measurement result per second 5 ms 5 ms
Residual current measuring No No
Harmonics, per order / voltage 1.-40. 1.-40.
Harmonics, per order / current 1.-40. 1.-40.
Unbalanced Yes Yes
Positive, negative and zero system Yes Yes
Measuring accuracy for voltage 0.2 % 0.2 %
Measuring accuracy for current 0.25 % 0.25 %
Measurement accuracy for active energy (kWh, /5 A) Class 0.5S Class 0.5S
Number of digital inputs 2 2
Number of digital outputs 2 2
Number of pulse outputs 2 2
Current-measuring channels 4 4
Temperature input Yes Yes
Memory; minimum and maximum values Yes Yes
Memory size 128 MB 128 MB
Interface RS232: 9.6 – 115.2 kbps, RS485: 9.6 – 921.6 kbps, Ethernet, Web RS232: 9.6 – 115.2 kbps, RS485: 9.6 – 921.6 kbps, Ethernet, Web
server/e-mail server/e-mail
Protocol Modbus RTU, Modbus-Gateway, Modbus TCP/IP, Modbus RTU over Modbus RTU, Modbus-Gateway, Modbus TCP/IP, Modbus RTU over
Ethernet, SNMP, BACnet (optional) Ethernet, SNMP, BACnet (optional)
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
ENERGY ANALYSER D550-24 1 2489780000 ENERGY ANALYSER D550 1 2425510000
Note

Accessories
Type Qty. Order No. Type Qty. Order No.

Note

3043800000 C.5
 Energy Analyser

Energy analysis instruments Energy Analyser 550-24 Energy Analyser 550-230

Energy Analyser

Technical data

Measurement range, voltage L-N, AC 417 V 417 V

Measurement range, voltage L-L, AC 720 V 720 V

C Surge voltage category 600 V CAT III 600 V CAT III

Voltage supply 48…110 V AC, 24…150 V DC 95 - 240 V AC, 80 - 300 V DC
Three-wire system Yes Yes
Four-wire system Yes Yes
Quadrants 4 4
Sampling frequency 50/60 Hz 20 kHz 20 kHz
Continuous measurements Yes Yes
Effective value from the period (50/60 Hz) 10 / 12 10 / 12
Measurement result per second 5 ms 5 ms
Residual current measuring Yes Yes
Harmonics, per order / voltage 1.-63. 1.-63.
Harmonics, per order / current 1.-63. 1.-63.
Unbalanced Yes Yes
Positive, negative and zero system Yes Yes
Measuring accuracy for voltage 0.1 % 0.1 %
Measuring accuracy for current 0.2 % 0.2 %
Measurement accuracy for active energy (kWh, /5 A) Class 0.2S Class 0.2S
Number of digital inputs 2 2
Number of digital outputs 2 2
Number of pulse outputs 2 2
Current-measuring channels 4+2 4+2
Temperature input Yes Yes
Memory; minimum and maximum values Yes Yes
Memory size 256 MB 256 MB
Interface RS485: 9.6 – 921.6 kbps, Profibus DP, Ethernet, Web server/e-mail RS485: 9.6 – 921.6 kbps, Profibus DP, Ethernet, Web server/e-mail

Protocol Modbus RTU, Modbus-Gateway, Modbus TCP/IP, Modbus RTU over Modbus RTU, Modbus-Gateway, Modbus TCP/IP, Modbus RTU over
Ethernet, SNMP, Profibus DP V0, BACnet (optional) Ethernet, SNMP, Profibus DP V0, BACnet (optional)
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
ENERGY ANALYSER 550-24 1 2602580000 ENERGY ANALYSER 550 1 2425500000
Note

Accessories
Type Qty. Order No. Type Qty.
Qty. Order
OrderNo.
No.
DIN rail adapters ENERGY METER BRACKET B1 1 2433040000 ENERGY METER BRACKET B1 1 2433040000
Seal ENERGY METER SEAL L144 1 2495630000 ENERGY METER SEAL L144 1 2495630000

Note

C.6 3043800000
 Energy Analyser

Energy analysis instruments Energy Analyser 750-24 Energy Analyser 750-230

Energy Analyser
Technical data

Measurement range, voltage L-N, AC 347 V 347 V

Measurement range, voltage L-L, AC 600 V 600 V

C
Surge voltage category 600 V CAT III 600 V CAT III
Voltage supply 48…110 V AC, 24…150 V DC 95 - 240 V AC, 80 - 300 V DC
Three-wire system Yes Yes
Four-wire system Yes Yes
Quadrants 4 4
Sampling frequency 50/60 Hz 25.6 kHz 25.6 kHz
Continuous measurements Yes Yes
Effective value from the period (50/60 Hz) 10 / 12 10 / 12
Measurement result per second 5 ms 5 ms
Residual current measuring Yes Yes
Harmonics, per order / voltage 1.-63. 1.-63.
Harmonics, per order / current 1.-63. 1.-63.
Unbalanced Yes Yes
Positive, negative and zero system Yes Yes
Measuring accuracy for voltage 0.1 % 0.1 %
Measuring accuracy for current 0.1 % 0.1 %
Measurement accuracy for active energy (kWh, /5 A) Class 0.2S Class 0.2S
Number of digital inputs 2 2
Number of digital outputs 2 2
Number of pulse outputs 2 2
Current-measuring channels 4+2 4+2
Temperature input Yes Yes
Memory; minimum and maximum values Yes Yes
Memory size 256 MB 256 MB
Interface RS485: 9.6 – 921.6 kbps, Profibus DP, Ethernet, Web server/e-mail RS485: 9.6 – 921.6 kbps, Ethernet, Profibus DP, Web server/e-mail

Protocol Modbus RTU, Modbus-Gateway, Modbus TCP/IP, Modbus RTU over Modbus RTU, Modbus-Gateway, Modbus TCP/IP, Modbus RTU over
Ethernet, SNMP, Profibus DP V0, BACnet (optional) Ethernet, SNMP, Profibus DP V0, BACnet (optional)
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
ENERGY ANALYSER 750-24 1 2534160000 ENERGY ANALYSER 750-230 1 2534130000
Note

Accessories
Type Qty. Order No. Type Qty.
Qty. Order
OrderNo.
No.
DIN rail adapters ENERGY METER BRACKET B1 1 2433040000 ENERGY METER BRACKET B1 1 2433040000
Seal ENERGY METER SEAL L144 1 2495630000 ENERGY METER SEAL L144 1 2495630000

Note

3043800000 C.7
 C
Energy Analyser

C.8
3043800000
 Contents

Energy Logger

Energy Logger
Energy Logger Introduction D.2

Energy Logger D.3

3043800000 D.1
 Introduction

Provide measurement data efficiently and conveniently

Our energy logger collects consumption and process data
Energy Logger

Integrated temperature measurement

The Energy Logger D550 has an input for temperature measurement. This
saves costs in setting up an infrastructure for the measurement of process
parameters

Integrated ModBus interface

As well as the consumption data of simple measuring devices,
measurement values from devices with a ModBus interface can also be
forwarded over a network.

D
Integrated data memory
Data can be saved long-term in the device’s built-in
32 MB memory.

As well as the consumption of electrical energy, the This particularly compact Energy Logger D550 is the
consumption of, for example, compressed air, water and costeffective solution to simplify and accelerate the
gas can also be optimised. Energy Logger D550 enables the collecting and forwarding of consumption and process data.
provision of cross-plant measurement data in the network.

Measuring devices with a simple S0 interface are

widespread. But they cannot transfer measured values direct
into the internal network. Therefore, a gateway is required
for each measuring device. The Energy Logger D550 can
collect and save impulse signals from up to 15 measurement
devices and forwards them via a LAN interface.

D.2 3043800000
 Energy Logger

Energy Logger Energy Logger D550

Energy Logger
Technical data

Surge voltage category 300 V CAT III

Voltage supply 20 - 250 V AC, 20 - 300 V DC20 - 300 V DC
Operating-hours counter Yes
Number of digital inputs 15
Number of digital outputs 3

D
Memory size 32 MB
Software ecoExplorer go®
Interfaces
Interface RS485: 9,6 – 115,2 kbps, Ethernet
Protocol
Protocol Modbus RTU, Modbus-Gateway, Modbus TCP/IP, Modbus RTU over
Ethernet, SNMP
Note

Ordering data
Type Qty. Order No.
ENERGY LOGGER D550 1 2425520000
Note

Accessories
Type Qty. Order No.
S0 module 1.3 kOhm ENERGY LOGGER S0 MODULE 1 2446170000

Note

3043800000 D.3
Energy Logger

D.4 3043800000
 Contents

Current transformer

Current transformer
Current transformer Introduction E.2

Cable-type current transformer E.4

Mini current transformer E.11

Plug-on current transformer E.12

Difference current transformer (Residual Current Monitoring, RCM) E.16

Rogowski current transformer system E.20

Instrument transformer wiring E.23

E

3043800000 E.1
 Introduction

Compatibility for different measurement environments

Current transformer

Current transformers from Weidmüller

Current transformers are mainly used where currents cannot The rated current can also be defined
be measured directly. They are special forms of transformers based on the following considerations:
which translate the primary current into a (usually) smaller,
standardized secondary current of a certain accuracy (class) • Transformer rated current multiplied by approximately 1.1
and galvanically separate the primary and secondary circuits. (next transformer size)
The physically induced saturation phenomenon of the core • Fuse rated current (transformer rated current) of the
material additionally ensures protection of the secondary measured system part (LV, UV)
circuit against excessive currents. • Actual rated current multiplied by 1.2 (recommended
if the actual current is significantly lower than the
A basic distinction can be made between single-conductor transformer rating or the fuse rating)
current transformers and wound current transformers.
The most common representative of the single-conductor Overdimensioning of the current transformer must be

E
current transformers is the clip-on current transformer. This is avoided, otherwise the measurement accuracy will drop
plugged onto the current-carrying conductor and thus forms considerably in some cases for relatively small currents
a transformer with a primary winding or with secondary (based on the primary rated current).
windings corresponding to the respective transmission ratio.

Proper selection of the primary rated current is important for

measurement accuracy. A ratio directly above the measured
1 / / /
or defined current (In) is recommended - for example:
In = 1.154 A, selected transformer ratio = 1.250/5.

1 / / /

Overview of
current converters

Type Plug-on current transformer

Rod current transformer
Technical information ValueLine BasicLine
Application New systems New systems
Coil Closed Closed
Installation Round cable, copper busbar, terminal rail, mounting plate Round cable (insulated)
Primary current 60 A…2,500 A 40 A …300 A 32 A…64 A
Secondary current 5A 1A 1A
Accuracy class 0.5 oder 1 3.1 oder 0.5 1
Ambient temperature –5…+50 °C -5 °C…+40 °C –5…+50 °C
Standards EN 61869-2 IEC 61869-2

E.2 3043800000
 Introduction

Current transformer
Rated current
The rated or formerly nominal current is the value of the
value of the primary and secondary current indicated on the
rating plate and secondary current (primary rated current,
secondary rated current) for which the current transformer
is rated. Standardized rated currents are - except for classes
0.2 S and 0.5 S - 10, 12.5, 15, 20, 25, 30, 40, 50, 60 and 75
A and their decimal multiples and parts thereof. Standardized
secondary currents are 1 and 5 A.

Translation ratio
The rated ratio is the ratio of the primary rated current
to the secondary rated current and is indicated as an
unabbreviated fraction on the rating plate. Most commonly,
x / 5 A transformers are used, because most measuring
instruments have the higher accuracy class at 5 A. For
technical and above all economic reasons, x /1 A converters
are recommended for long measuring cable lengths. The line
losses are only 4 percent for 1 A converters compared to 5 A
converters. However, the measuring devices here often have
the lower measuring accuracy.

Split-core current transformer RCM current transformers System with Rogowski coil and analysis unit

Retrofitting New systems/Retrofitting Retrofitting

Detachable Closed/Detachable Detachable with bayonet joint
Round cable (insulated), copper busbar Round cable, copper busbar Round cable, copper busbar
50 A…5,000 A 18 A...25 A 5,000 A
1 A or 5 A 0.0417 A 1A
0.5; 1 or 3 0.5/0.5
–5…+55 °C -10 °C...+70 °C –40…+80 °C
EN 61869-2 EN 61869-2 IEC 61010 / EN 61869-2

3043800000 E.3
 Cable-type current transformer

Cable-type current transformer

The KCMA series cable-type current transformer is mainly used for retrofitting in existing
Current transformer

systems. Due to its compact design with dimensions of 41.6 mm x 64.5 mm x 68 mm,
it is especially suited for installation in hard-to-reach places or use in locations with
restricted dimensional freedom. The KCMA-18 registers primary currents of 50 A to 250 A
and transforms these into up to 5 A on the secondary side. To install the transformer, the
locking mechanism is opened, the transformer is positioned around the primary conductor
and is then closed again with an audible click. Once the secondary cables are successfully
connected, the measuring apparatus is immediately ready for operation.

64.50

E
23

.50
18

x.
ma 41.6 55
67.30

Ordering data
Order No. Type Primary current Secondary current max. Tolerance class Load Round conductor Qty.
1482020000 KCMA-18-50-1A-1VA-3 50 A 1A 3 1 VA 18.50 mm 1
2420780000 KCMA-18-75-1A-1VA-3 75 A 1A 3 1 VA 18.50 mm 1
1482010000 KCMA-18-100-1A-1,25VA-3 100 A 1A 3 1.25 VA 18.50 mm 1
2752980000 KCMA-18-125-1A-1,5VA-3 125 A 1A 3 1.5 VA 18.50 mm 1
2420770000 KCMA-18-150-1A-2VA-3 150 A 1A 3 2 VA 18.50 mm 1
2420760000 KCMA-18-200-1A-3VA-3 200 A 1A 3 3 VA 18.50 mm 1
2420750000 KCMA-18-250-1A-4VA-3 250 A 1A 3 4 VA 18.50 mm 1
2752990000 KCMA-18-100-1A-0.3VA-1 100 A 1A 1 0.3 VA 18.50 mm 1
2753000000 KCMA-18-125-1A-0.5VA-1 125 A 1A 1 0.5 VA 18.50 mm 1
2753010000 KCMA-18-150-1A-1VA-1 150 A 1A 1 1 VA 18.50 mm 1
2753020000 KCMA-18-200-1A-1.5VA-1 200 A 1A 1 1.5 VA 18.50 mm 1
1482000000 KCMA-18-250-1A-1,5VA-1 250 A 1A 1 1.5 VA 18.50 mm 1
2753030000 KCMA-18-150-5A-1VA-1 150 A 5A 1 1 VA 18.50 mm 1
2753040000 KCMA-18-200-5A-1,5VA-1 200 A 5A 1 1.5 VA 18.50 mm 1
2753050000 KCMA-18-250-5A-1VA-0.5 250 A 5A 0,5 1 VA 18.50 mm 1
Note

E.4 3043800000
 Cable-type current transformer

Cable-type current transformer

The KCMA-28 series cable-type current transformer is mainly used for retrofitting in

Current transformer
existing systems. Due to its compact design with dimensions of 49 mm x 59 mm x 79.5
mm, it is especially suited for installation in hard-to-reach places or use in locations with
restricted dimensional freedom. The KCMA-28 registers primary currents of 200 A to 500 A
and transforms these into up to 5 A on the secondary side. To install the transformer, the
locking mechanism is opened, the transformer is positioned around the primary conductor
and is then closed again with an audible click. Once the secondary cables are successfully
connected, the measuring apparatus is immediately ready for operation.

Ordering data
Order No. Type Primary current Secondary current max. Tolerance class Load Round conductor Qty.
2753060000 KCMA-28-200-1A-0.3VA-1 200 A 1A 1 0.3 VA 27.00 mm 1
2753070000 KCMA-28-250-1A-1VA-1 250 A 1A 1 1 VA 27.00 mm 1
2753080000 KCMA-28-300-1A-1.5VA-1 300 A 1A 1 1.5 VA 27.00 mm 1
2753090000 KCMA-28-400-1A-2.5VA-1 400 A 1A 1 2.5 VA 27.00 mm 1
2753100000 KCMA-28-500-1A-1VA-0.5 500 A 1A 0,5 1 VA 27.00 mm 1
2753110000 KCMA-28-250-5A-1VA-1 250 A 5A 1 1 VA 27.00 mm 1
2753120000 KCMA-28-300-5A-1.5VA-1 300 A 5A 1 1.5 VA 27.00 mm 1
2753130000 KCMA-28-400-5A-2.5VA-1 400 A 5A 1 2.5 VA 27.00 mm 1
2753140000 KCMA-28-500-5A-3VA-1 500 A 5A 1 3 VA 27.00 mm 1
Note

3043800000 E.5
 Cable-type current transformer

Cable-type current transformer

The KCMA-32 series cable-type current transformer is mainly used for retrofitting in
Current transformer

existing systems. Due to its compact design with dimensions of 59.2 mm x 96.4 mm x
90 mm, it is especially suited for installation in hard-to-reach places or use in locations with
restricted dimensional freedom. The KCMA-32 registers primary currents of 400 A to 600 A
and transforms these into up to 5 A on the secondary side. To install the transformer, the
locking mechanism is opened, the transformer is positioned around the primary conductor
and is then closed again with an audible click. Once the secondary cables are successfully
connected, the measuring apparatus is immediately ready for operation.
96.4

E 32
.50

m ax.
75
59.2 89.20

Ordering data
Order No. Type Primary current Secondary current max. Tolerance class Load
1481990000 KCMA-32-400-1A-5VA-1 400 A 1A 1 5 VA
1481980000 KCMA-32-600-1A-5VA-1 600 A 1A 1 5 VA
2420730000 KCMA-32-400-5A-5VA-1 400 A 5A 1 5 VA
2420740000 KCMA-32-500-5A-5VA-1 500 A 5A 1 5 VA
2420720000 KCMA-32-600-5A-5VA-1 600 A 5A 1 5 VA
Note

E.6 3043800000
 Cable-type current transformer

Cable-type current transformer

The KCMA-42 series cable-type current transformer is mainly used for retrofitting in

Current transformer
existing systems. As a result of its compact design with dimensions of 72.2 mm x 120.6
mm x 98.1 mm, it is especially suited for installation in hard-to-reach places or use in
locations with restricted dimensional freedom. The KCMA-42 registers primary currents
of 250 A to 1000 A and transforms these into up to 5 A on the secondary side. To install
the transformer, the locking mechanism is opened, the transformer is positioned around
the primary conductor and is then closed again with an audible click. Once the secondary
cables are successfully connected, the measuring apparatus is immediately ready for
operation.

Ordering data
Order No. Type Primary current Secondary current max. Tolerance class Load Round conductor Qty.

2753150000 KCMA-42-250-1A-2.5VA-1 250 A 1A 1 2.5 VA 42.00 mm 1

2753160000 KCMA-42-300-1A-2.5VA-1 300 A 1A 1 2.5 VA 42.00 mm 1
2753170000 KCMA-42-400-1A-2.5VA-0.5 400 A 1A 0,5 2.5 VA 42.00 mm 1
2753180000 KCMA-42-500-1A-2.5VA-0.5 500 A 1A 0,5 2.5 VA 42.00 mm 1
2753190000 KCMA-42-600-1A-2.5VA-0.5 600 A 1A 0,5 2.5 VA 42.00 mm 1
2753200000 KCMA-42-750-1A-2.5VA-0.5 750 A 1A 0,5 2.5 VA 42.00 mm 1
2753210000 KCMA-42-800-1A-2.5VA-0.5 800 A 1A 0,5 2.5 VA 42.00 mm 1
2753220000 KCMA-42-1000-1A-2.5VA-0.5 1000 A 1A 0,5 2.5 VA 42.00 mm 1

2753230000 KCMA-42-300-5A-2.5VA-1 300 A 5A 1 2.5 VA 42.00 mm 1

2753240000 KCMA-42-400-5A-5VA-1 400 A 5A 1 5 VA 42.00 mm 1
2753250000 KCMA-42-500-5A-5VA-1 500 A 5A 1 5 VA 42.00 mm 1
2753260000 KCMA-42-600-5A-2.5VA-0.5 600 A 5A 0,5 2.5 VA 42.00 mm 1
2753270000 KCMA-42-750-5A-2.5VA-0.5 750 A 5A 0,5 2.5 VA 42.00 mm 1
2753280000 KCMA-42-800-5A-2.5VA-0.5 800 A 5A 0,5 2.5 VA 42.00 mm 1
2753290000 KCMA-42-1000-5A-2.5VA-0.5 1000 A 5A 0,5 2.5 VA 42.00 mm 1
Note

3043800000 E.7
 Cable-type current transformer

Cable-type current transformer

The KCMA-44 series cable-type current transformer is mainly used for retrofitting in
Current transformer

existing systems. As a result of its compact design with dimensions of 72.2 mm x

120.6 mm x 98 mm, it is especially suited for installation in hard-to-reach places or use in
locations with restricted dimensional freedom. The KCMA-44 registers primary currents
of 750 A to 1000 A and transforms these into up to 5 A on the secondary side. To install
the transformer, the locking mechanism is opened, the transformer is positioned around
the primary conductor and is then closed again with an audible click. Once the secondary
cables are successfully connected, the measuring apparatus is immediately ready for
operation. 120.6

E
44
x.
ma 85
72.2 98.10

Ordering data
Order No. Type Primary current Secondary current max.
2420710000 KCMA-44-750-5A-5VA-1 750 A 5A
2437370000 KCMA-44-800-5A-5VA-1 800 A 5A
2437400000 KCMA-44-1000-5A-5VA-1 1000 A 5A
Note

E.8 3043800000
 Cable-type current transformer

Cable-type current transformer

The KCMA-5 series cable-type current transformer with its separable measuring core

Current transformer
allows it to be retrofitted in existing systems without disconnecting the primary conductor.
Thanks to the practical integrated interlock system, the transformer can be positioned
around the primary conductor and then closed again with an audible click. The KCMA-5
registers primary currents of 250 A to 1000 A and transforms these into currents of up to
5 A on the secondary side.

58
34
158.15
85

E
36.15

55
125 71

Ordering data
Order No. Type Primary current Secondary current max. Tolerance class Load
2753360000 KCMA 5-250-5A-1.5VA-1 250 A 5A 1 1.5 VA
2753370000 KCMA 5-400-5A-1VA-0.5 400 A 5A 0,5 1 VA
2753380000 KCMA 5-500-5A-2.5VA-0.5 500 A 5A 0,5 2.5 VA
2753390000 KCMA 5-600-5A-2.5VA-0.5 600 A 5A 0,5 2.5 VA
2753400000 KCMA 5-1000-5A-5VA-0.5 1000 A 5A 0,5 5 VA
Note

3043800000 E.9
 Cable-type current transformer

Cable-type current transformer

The KCMA-8 series cable-type current transformer with its separable measuring core
Current transformer

allows it to be retrofitted in existing systems without disconnecting the primary conductor.

Thanks to the practical integrated interlock system, the transformer can be positioned
around the primary conductor and then closed again with an audible click. The KCMA-8
registers primary currents of 250 A to 5000 A and transforms these into currents of up to
5 A on the secondary side.

155 58
85 34
198.15
125

E
36.15

71

Ordering data
Order No. Type Primary current Secondary current max. Tolerance class Load Round conductor Rail Qty.
2728090000 KCMA-8-250-5A-1.5VA1 250 A 5A 1 1.5 VA 80.00 mm 80 x 120 mm 1
2728100000 KCMA-8-500-5A-5VA1 500 A 5A 1 5 VA 80.00 mm 80 x 120 mm 1
2728110000 KCMA-8-750-5A-2VA1 750 A 5A 1 2 VA 80.00 mm 80 x 120 mm 1
2728130000 KCMA-8-1000-5A-10VA1 1000 A 5A 1 10 VA 80.00 mm 80 x 120 mm 1
2728140000 KCMA-8-1200-5A-10VA1 1200 A 5A 1 10 VA 80.00 mm 80 x 120 mm 1
2728150000 KCMA-8-1500-5A-15VA1 1500 A 5A 1 15 VA 80.00 mm 80 x 120 mm 1
2728160000 KCMA-8-2000-5A-15VA1 2000 A 5A 1 15 VA 80.00 mm 80 x 120 mm 1
2728170000 KCMA-8-2500-5A-15VA1 2500 A 5A 1 15 VA 80.00 mm 80 x 120 mm 1
2728180000 KCMA-8-3000-5A-15VA1 3000 A 5A 1 15 VA 80.00 mm 80 x 120 mm 1
2728190000 KCMA-8-4000-5A-15VA1 4000 A 5A 1 15 VA 80.00 mm 80 x 120 mm 1
2728210000 KCMA-8-5000-5A-15VA1 5000 A 5A 1 15 VA 80.00 mm 80 x 120 mm 1
2753410000 KCMA-8-600-5A-2.5VA-0.5 600 A 5A 0,5 2.5 VA 80.00 mm 80 x 120 mm 1
2753420000 KCMA-8-800-5A-2.5VA-0.5 800 A 5A 0,5 2.5 VA 80.00 mm 80 x 120 mm 1
2753430000 KCMA-8-1000-5A-5VA-0.5 1000 A 5A 0,5 5 VA 80.00 mm 80 x 120 mm 1
2753450000 KCMA-8-1200-5A-5VA-0.5 1200 A 5A 0,5 5 VA 80.00 mm 80 x 120 mm 1
Note

E.10 3043800000
 Mini current transformer

Mini current transformer

The CMA-CTM 7 series mini current transformer is an inductive current transformer

Current transformer
designed according to the transformer principle for circular primary conductors. The
CMA-CTM 7 series current transformers are maintenance-free and are designed for
primary currents of 32 A to 64 A. These are transformed into a current of up to 1 A on the
secondary side.

7.6
46.50

E
27.50 19

Ordering data
Order No. Type Primary current Secondary current max.
2525150000 CMA-CTM-7-32-1A-0.2VA-1 32 A 1A
2556030000 CMA-CTM-7-50-1A-0.4VA-1 50 A 1A
2556010000 CMA-CTM-7-64-1A-0.5VA-1 64 A 1A
Note

3043800000 E.11
 Plug-on current transformer

Plug-on current transformer – ValueLine

The current transformers in our ValueLine can detect primary currents in the range from
Current transformer

60 A to 2,500 A and convert them into currents of up to 5 A on the secondary side.

The transformers are equipped with a maintenance-free cage clamp terminal and are
particularly suitable for mounting on busbars and on cables of new installations. These
transformers have UL approval.

CMA-31
52
37
35

25.7
0
20.30
25.30
30.30
31.50

E
10.30
12.30

10.30
12.30
20.30
25.30 33
30.30 68

Ordering data
Order No. Type Primary current Secondary current max. Tolerance class Load Round conductor Rail Qty.

2421380000 CMA-31-60-5A-1,25VA-1 60 A 5A 1 1.25 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1

1482040000 CMA-31-75-5A-2,5VA-1 75 A 5A 1 2.5 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1
1482030000 CMA-31-100-5A-2,5VA-1 100 A 5A 1 2.5 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1
2420960000 CMA-31-150-5A-5VA-1 150 A 5A 1 5 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1
2420950000 CMA-31-200-5A-5VA-1 200 A 5A 1 5 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1
2420940000 CMA-31-250-5A-5VA-1 250 A 5A 1 5 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1
2420920000 CMA-31-400-5A-5VA-1 400 A 5A 1 5 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1
2420910000 CMA-31-500-5A-5VA-1 500 A 5A 1 5 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1
2420900000 CMA-31-600-5A-5VA-1 600 A 5A 1 5 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1
2420890000 CMA-31-750-5A-5VA-1 750 A 5A 1 5 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1
2680150000 CMA-41-1000-5A-5VA-1 1000 A 5A 31.00 mm 30 x 15 mm, 40 x 10 mm 1
2680160000 CMA-51-1250-5A-5VA-1 1250 A 5A 1 5 VA 43.00 mm 40 x 30 mm, 50 x 12 mm 1
2680170000 CMA-61-1500-5A-5VA-1 1500 A 5A 1 5 VA 43.00 mm 50 x 30 mm, 63 x 10 mm 1
2680180000 CMA-81-2000-5A-10VA-1 2000 A 5A 1 10 VA 54.00 mm 80 x 10 mm, 60 x 30 mm 1
2680190000 CMA-101-2500-5A-10VA-1 2500 A 5A 1 10 VA 70.00 mm 100 x 10 mm, 80 x 30 mm 1

2680200000 CMA-31-125-5A-2,5VA-0,5 125 A 5A 0,5 2.5 VA 25.70 mm 30 x 10 mm, 25 x 12 mm, 20 x 20 mm 1

2421030000 CMA-31-150-5A-2,5VA-0,5 150 A 5A 0,5 2.5 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1
2421020000 CMA-31-200-5A-2,5VA-0,5 200 A 5A 0,5 2.5 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1
1482050000 CMA-31-250-5A-5VA-0,5 250 A 5A 0,5 5 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1
2420990000 CMA-31-300-5A-5VA-0,5 300 A 5A 0,5 5 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1
2420980000 CMA-31-400-5A-5VA-0,5 400 A 5A 0,5 5 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1
1482070000 CMA-31-500-5A-5VA-0,5 500 A 5A 0,5 5 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1
2420970000 CMA-31-600-5A-5VA-0,5 600 A 5A 0,5 5 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1
1482080000 CMA-31-750-5A-5VA-0,5 750 A 5A 0,5 5 VA 25.70 mm 20 x 20 mm, 25 x 12 mm, 30 x 10 mm 1
2680210000 CMA-41-1000-5A-5VA-0,5 1000 A 5A 31.00 mm 30 x 15 mm, 40 x 10 mm 1
2680220000 CMA-51-1250-5A-5VA-0,5 1250 A 5A 43.00 mm 50 x 12 mm, 40 x 30 mm 1
2680230000 CMA-61-1500-5A-5VA-0,5 1500 A 5A 43.00 mm 50 x 30 mm, 63 x 10 mm 1
2680240000 CMA-81-2000-5A-10VA-0,5 2000 A 5A 54.00 mm 60 x 30 mm, 80 x 10 mm 1
2680250000 CMA-101-2500-5A-10VA-0,5 2500 A 5A 0,5 10 VA 70.00 mm 100 x 10 mm, 80 x 30 mm 1
Note For additional articles and information, refer to
eshop.weidmueller.com

E.12 3043800000
 Plug-on current transformer

CMA-41

Current transformer
CMA-51

E
CMA-61

CMA-81

CMA-101

3043800000 E.13
 Plug-on current transformer

Plug-on current transformer – BasicLine

The BasicLine current transformers can detect primary currents in the range from 40 A to
Current transformer

300 A and convert them into a current of up to 1 A on the secondary side. These BasicLine
current transformers are also suitable for mounting on busbars and on cables of new
installations. This portfolio of current transformer has an excellent cost/performance ratio.

Ordering data
Order No. Type Primary current Secondary current max. Tolerance class Load Round conductor Rail Qty.
3008140000 CMA-A20-40-1A-3-1VA 40 A 1A 3 1 VA 10.50 mm 20 x 10 mm 1
3008200000 CMA-A20-50-1A-3-1VA 50 A 1A 3 1 VA 10.50 mm 20 x 10 mm 1
3008210000 CMA-A20-60-1A-1-1VA 60 A 1A 1 1 VA 10.50 mm 20 x 10 mm 1
3008220000 CMA-A20-75-1A-1-1,5VA 75 A 1A 1 1.5 VA 10.50 mm 20 x 10 mm 1
3008230000 CMA-A20-100-1A-1-2,5VA 100 A 1A 1 2.5 VA 10.50 mm 20 x 10 mm 1
3008240000 CMA-A20-125-1A-0,5-2,5VA 125 A 1A 0,5 2.5 VA 10.50 mm 20 x 10 mm 1
3008250000 CMA-A20-150-1A-0,5-2,5VA 150 A 1A 0,5 2.5 VA 10.50 mm 20 x 10 mm 1
3008260000 CMA-A20-200-1A-0,5-5VA 200 A 1A 0,5 5 VA 10.50 mm 20 x 10 mm 1
3008270000 CMA-A30-250-1A-0,5-5VA 250 A 1A 0,5 5 VA 20.00 mm 30 x 10 mm 1
3008280000 CMA-A30-300-1A-0,5-5VA 300 A 1A 0,5 5 VA 20.00 mm 30 x 10 mm 1
Note For additional articles and information, refer to
eshop.weidmueller.com

E.14 3043800000
3043800000
E.15
E

Current transformer
 Difference current transformer (Residual Current Monitoring, RCM)

Difference current transformer (Residual Current Monitoring, RCM)

The current transformers of the CMA-RCM series are current transformers for RCM
Current transformer

measurement on circular primary conductors. Current transformers of this series are

maintenance-free and designed for the detection of residual currents of 25 A. For example,
these converters are compatible with our Energy Meter EM 750.

Ordering data
Order No. Type Primary current Round conductor
2603420000 CMA-RCM-DACT-20 25 A 20.00 mm
2603430000 CMA-RCM-DACT-35 25 A 35.00 mm
2603440000 CMA-RCM-DACT-60 25 A 60.00 mm
2603450000 CMA-RCM-DACT-120 25 A 120.00 mm
Note

E.16 3043800000
 Difference current transformer (Residual Current Monitoring, RCM)

CMA-RCM-DACT-20

82

Current transformer
20

62.20
62.90
34

30
64.20

CMA-RCM-DACT-35
104.50

35

E
86.43
85.50
45.50

30

63.40

CMA-RCM-DACT-60
135

60
117
116
62

37
70.40

CMA-RCM-DACT-120
210

12
0
190.30

191.50
101.50

37

63.40

3043800000 E.17
 Difference current transformer (Residual Current Monitoring, RCM)

Difference current transformer (Residual Current Monitoring, RCM)

The KCMA-RCM series cable conversion current transformer is mainly used to retrofit an
Current transformer

RCM measurement into existing systems. The KCMA-RCM measures residual currents
of up to 25 A. During installation, the locking mechanism of the transformer is opened,
the transformer is placed around the primary conductor and audibly re-engaged. After
successful connection of the secondary conductors, the measurement setup is immediately
ready for operation. For example, these converters are compatible with our Energy Meter
EM 750.

Ordering data
Order No. Type Primary current Round conductor
2656270000 KCMA-RCM-23D 18 A 20.00 mm
2656280000 KCMA-RCM-58D 18 A 50.00 mm
2656290000 KCMA-RCM-812D 18 A 80.00 mm
Note

E.18 3043800000
 Difference current transformer (Residual Current Monitoring, RCM)

KCMA-RCM-23D 93 58
34
23

Current transformer
106,15

33
36,15

71

KCMA-RCM-58D
58
34
158.15
85

E
36.15

55
125 71

KCMA-RCM-812D
155 58
85 34
198.15
125 36.15

71

3043800000 E.19
 Rogowski current transformer system

Measure energy consumption easily, safely and flexibly

Current transformer

Rogowski current transformer system for easy retrofitting

Growing environmental requirements are forcing companies Our Rogowski coils can be integrated either on busbars or
to make the energy consumption of their existing machinery power cables. They are available
and equipment transparent. Rogowski coils are used for for three diameters between 70 and 175 mm. Their output
reliable measurement of AC currents and can be quickly and signal is fed to a measuring transducer. This measures
easily integrated into existing environments. alternating currents or a voltage signal and can - depending
on the version - output a standardized standard signal (1 A) or
In addition to conventional current transformers, Rogowski a signal selectable from four V or mA ranges. Twelve values
coils can also be used for current measurement. Due to the between 100 A and 5,000 A can be selected for the input
lack of an iron core, non-linear influences of the iron core measuring range.
are eliminated. Rogowski coils can be easily applied and
removed without breaking the circuit, i.e. without major Your special advantage:
installation work.

E
In contrast to current transformers, high short-circuit • Evaluation unit for Rogowski coils
currents in the power distribution do not cause high losses • Linearity error below 0.1%
in Rogowski coils. There can also be no saturation or • 12 different current ranges from 100 to 5000A selectable
remanence effects that are detrimental to the measurement. • Selection of different outputs (RCMC-5000-A0-P only):
Likewise, no dangerous voltages can be generated in open 4 true RMS outputs: 0-20 mA, 4-20 mA, 0-5 V & 010 V
circuit operation. and 2 instantaneous voltage outputs: 0-225 mV and
0-333 mV or 1 A output

E.20 3043800000
 Rogowski current transformer system

Current transformer
Universally applicable
Combined with our Rogowski coils, it offers a
universal measurement and monitoring solution

Simple configuration and status query

Configuration possible by 2 buttons on the
device. Additional LEDs indicate the status of
the device

Retrofittable
DIN mounting allows easy retrofit within the
control cabinet

3043800000 E.21
 Rogowski current transformer system

Rogowski-System
Current transformer

Ordering data
Order No. Type Diameter Cable length Primary current Qty.
Rogowski coils
2593370000 RCMA-B22-D70-1.5 70 mm 1.5 m 5000 A 1
2593340000 RCMA-B22-D70-4.5 70 mm 4.5 m 5000 A 1
2831090000 RCMA-B22-D70-6.0 70 mm 6m 5000 A 1
2593380000 RCMA-B22-D125-1.5 125 mm 1.5 m 5000 A 1
2593350000 RCMA-B22-D125-4.5 125 mm 4.5 m 5000 A 1
2831100000 RCMA-B22-D125-6.0 125 mm 6m 5000 A 1
2593390000 RCMA-B22-D175-1.5 175 mm 1.5 m 5000 A 1
2593360000 RCMA-B22-D175-4.5 175 mm 4.5 m 5000 A 1
2831110000 RCMA-B22-D175-6.0 175 mm 6m 5000 A 1
2865880000 RCMA-B22-D300-6.0 300 mm 6m 5000 A 1
Note

Ordering data
Order No. Type Output current Input measurement range
Transmitter
2593400000 RCMC-5000-1A-P 0…1 A AC
2593410000 RCMC-5000-AO-P 0...20 mA, 4...20 mA 100 A, 200 A, 300 A, 400 A, 500 A, 600 A, 800 A, 1000 A, 1500 A, 2000 A, 4000 A, 5000 A
Note

E.22 3043800000
 Instrument transformer wiring

Efficient implementation of testing and measurement switchgear

Current transformer
Current and voltage transformer wiring solutions

When installing power monitoring components, a simple

defective connection can result in the destruction of current
transformers or voltage converters. Our specially developed
test-disconnect terminal blocks are a safe way of solving this
problem. Easy to use and available with different connection
technologies, they facilitate error-free and convenient wiring.
This guarantees the protection of your transformers and
measuring devices and ensures safe, precise work. The
modular concept of our terminal blocks for transformer
switchgears also saves space in the cabinet.

E
Avoiding errors through ease of use

Our test terminal blocks with tried-and-tested screw

connection technology allow a large number of switching
tasks to be overcome clearly and cost-effectively. The screws
for the wire connection can only be accessed once the
current transformer‘s short-circuit slider has been activated.
This enhances safety as it prevents the accidental short-cir-
cuiting or opening of the converter circuit. Our pre-installed
LST EM-BLOCK makes it easier to connect and short the
current transformers, and is suitable for up to four phases.

Ordering data
Type Order No.
EM CONNECTOR CURRENT ATTB 8000100996
EM CONNECTOR VOLTAGE ATTB 8000100997 EM CONNECTOR CURRENT ATTB EM CONNECTOR VOLTAGE ATTB

Technical data
EM CONNECTOR EM CONNECTOR
VOLTAGE ATTB CURRENT ATTB
Connectable current transformers 4 4
Fuses for measurement voltage 3 phases No
Fuse for supply voltage Yes No
Neutral conductor connection 2 No
PE connection Yes No
Markers Yes Yes

3043800000 E.23
 E
Current transformer

E.24
3043800000
 Contents

Sensors - u-sense

Sensors - u-sense
Sensors - u-sense u-sense vibration – Introduction F.2

u-sense vibration – Selection table F.4

u-sense vibration – Wireless sensors F.6

u-sense vibration – Cable sensors – Introduction F.10

u-sense vibration – Cable sensors – VIB2x F.12

u-sense vibration – Cable sensors – VIB4x F.18

u-sense vibration – Cable sensors – VIB6x F.24

Accessories F.30

3043800000 F.1
 u-sense vibration – Introduction

Smart industrial IoT sensor solutions

Sensors - u-sense

for optimising systems and processes

u-sense vibration for condition monitoring of machines
The Industrial Internet of Things (IIoT) means connecting physical objects in the
industrial environment to the internet. Sensors play a crucial role here, as they
provide us with valuable information about the state of the real world. Based on
the sensor data, we can optimise the efficiency and flexibility of systems and
processes, reduce costs, improve quality and identify risks in good time, increasing
the resilience of our systems.
An important field of application for the Industrial IoT is machine monitoring
through vibration analysis. Vibrations tell us a lot about the condition of a machine.
For example, they can indicate imbalances, misalignment or structural damage, or
detect signs of wear on bearings at an early stage.
Modern IIoT sensors use microelectromechanical acceleration sensors (MEMS)
to record vibrations and pre-process the raw signals directly in the sensor. This
usually involves broadband analysis in the time domain of the signal, which
provides vibration indicators such as the effective vibration speed or vibration
acceleration. In addition, a spectral analysis after Fourier transformation can also

F
be carried out in the frequency domain. This provides detailed information about
the condition of the machine and can increase the sensitivity of damage detection
and provide further information about the cause and type of damage. Machine
monitoring methods using vibration analysis are described in international
standards such as ISO 10816 or ISO 13337.
In addition to the actual measurement and signal processing, IIoT sensors also
have the task of communicating the information to higher-level data processing
systems. The physical connection is made via cable or radio; Weidmüller’s portfolio
of vibration sensors includes both wired and wireless sensors. Established
automation technology protocols, such as current interface and fieldbus protocols,
as well as modern protocols from the field of information technology, such as
Bluetooth, IO-Link and MQTT, are used for communication.

F.2 3043800000
 u-sense vibration – Introduction

Sensors - u-sense
Perfect for retrofitting
Completely wireless installation due to data
transmission via Bluetooth Low Energy (BLE) 5.0
and power supply via lithium-ion battery. High
protection according to IP67 for use in harsh
environments.

Variable mounting
Vibration analysis according to
Various mounting options, either via M8 screw
DIN ISO 10816
connections or via mounting adapters, give the
u-sense vibration supports signal analysis in the
greatest possible flexibility.
time and frequency domain and complies with
DIN ISO 10816 for measuring and evaluating
vibrations.

3043800000 F.3
 u-sense vibration – Selection table

Selection table
Sensors - u-sense

Typ VIB20 VIB22 VIB24 VIB40 VIB42

IP66, IP67 (each with IP66, IP67 (each with IP66, IP67 (each with mounted IP66, IP67 (each with IP66, IP67 (each with
Protection class
mounted plug) mounted plug) plug) mounted plug) mounted plug)
Ex class – – – Ex db IIC, Ex tb IIC, Ex ib IIC –
For dust Ex zones – – – Various: 1, 2, no Various
For gas Ex zones – – – Various: 21, 22, no Various
Safety requirement level partly SIL1 – – – –
With connection for machine mounting Yes Yes Yes Yes Yes
Ambient temperature, max. +80°C +80°C +80°C +60°C +60°C
Ambient temperature, min. -40°C -40°C -40°C -40°C -40°C
Number of measuring axes 1 1 1 1 1
Preparation of sensor measurement data 1-axis broadband analysis 1-axis broadband analysis 1-axis broadband analysis 1-axis broadband analysis 1-axis broadband analysis
according to ISO 10816-3 10 Hz...1 kHz, VRMS 10 Hz...1 kHz, VRMS 10 Hz...1 kHz, VRMS 10 Hz...1 kHz, VRMS 10 Hz...1 kHz, VRMS
Raw data – – Zeitdomäne, Beschleunigung – –
Transmission interval of the signals continuous measurement continuous measurement continuous measurement continuous measurement continuous measurement
Temperature measurement No Yes Yes No Yes
Temperature range at the measuring head -40 °C ... +85 °C -40 °C ... +85 °C -40 °C ... +85 °C -40°C – +125°C -40°C – +125°C
Measurement range +-15g +-15g +-48g +-16.5g +-16.5g
Output 1 (pin 4): IO-Link or
Output 1 (pin 4): IO-Link
4...20 mA Switching contact; 4...20 mA 2x 4...20 mA
Output 2 (pin 2): 4…20
Output signal (proportional to Output 2 (pin 2): 4…20 mA (proportional to (proportional to
mA (proportional to
measurement range) (proportional to measurement measurement range) measurement range)
measurement range)

F
range) or Switching contact
Auxiliary voltage 18…30 V DC 18…30 V DC 18…30 V DC 10…30 V DC 10…30 V DC
With IO-Link output No Yes Yes No No
Wireless No No No No No
Material Stainless steel 1.44 V2A / V4A Stainless steel 1.44 V2A / V4A Stainless steel 1.44 V2A / V4A Stainless steel 1.44 V2A / V4A Stainless Steal 1.44 V2A

Ordloc: M12 Plug connector, 4-pin;

Electrical connection M12 Plug connector, 4-pin M12 Plug connector, 4-pin M12 Plug connector, 4-pin M12 Plug connector, 4-pin
Hazloc Ex i: M12 Plug connector, 5-pin

Product key
XXXX-XXXXXX-XXX- X XXX X X
Type Features EX Measurement and range Safety Material/Housing
US67-VIB20C-ANA- analog, vrms 0 non EX (Standard) UNI IOLink configurable 0 no SIL (Standard) 0 Material V2A (Standard)
US67-VIB22C-IOL- IO-Link, standard frequency A VIB4X Ex db, tb Zone 1/21, 2/22 008 vrms 0-8mm/s A VIB2X SIL 1 A Material V4A
US67-VIB24C-IOL- IO-Link, extended frequency B VIB4X Ex ib Zone 1/21, 2/22 010 vrms 0-10mm/s B VIB6X SIL 2 B Material Dublex

US67-VIB40C-ANA- analog, vrms C VIB4X Ex UL, Division 2 016 vrms 0-16mm/s C VIB6X Material V2A Adapter
US67-VIB42C-ANA- analog, vrms, T D VIB6X Ex db, tb, Zone 1/21 020 vrms 0-20mm/s D VIB6X Material V4A Adapter
US67-VIB44C-ANA- analog, arms E VIB6X Ex ec, Zone 2/22 025 vrms 0-25mm/s
US67-VIB46C-ANA- analog, vrms, extended average time 60s 032 vrms 0-32mm/s
US67-VIB60C-ANA- analog, vrms/arms, 2 switch, limit 050 vrms 0-50mm/s
US67-VIB62C-ANA- analog, arms, 2 switch, window 064 vrms 0-64mm/s
128 vrms 0-128mm/s
A01 arms 0-1g
A02 arms 0-2g
A04 arms 0-4g
A06 arms 0-6g
A08 arms 0-8g
A10 arms 0-10g
A12 arms 0-12g

F.4 3043800000
 u-sense vibration – Selection table

Sensors - u-sense
VIB44 VIB46 VIB60 VIB62 V1T
IP66, IP67 (with mounted plug IP66, IP67 (with mounted plug
IP66, IP67 (each with mounted plug) IP66, IP67 (each with mounted plug) IP66, IP67
and closed cover) and closed cover)
– – Ex db IIC, Ex ec IIC – IIC
Various Various Various Various 22
Various Various Various Various 2
– – SIL2 SIL2 –
Yes Yes Yes Yes Yes
+60°C +60°C +60°C +60°C –
-40°C -40°C -40°C -40°C –
1 1 1 1 3
1-axis broadband analysis 1-axis broadband analysis 1-axis broadband analysis 1-axis broadband analysis 3-axis broadband analysis
10 Hz...1 kHz, VRMS 10 Hz...1 kHz, VRMS 10 Hz...1 kHz, VRMS 10 Hz...1 kHz, VRMS 10 Hz...1 kHz, VRMS
– – – – Frequency domain, acceleration
continuous measurement continuous measurement continuous measurement continuous measurement 10 Sek, 10 Min, 1 Std
No No No No No
-40°C – +125°C -40°C – +125°C -40°C – +85°C -40°C – +85°C –
+-16.5g +-16.5g +-16.5g +-16.5g +-16g

4...20 mA 4...20 mA 1 x 4...20 mA 1 x 4...20 mA Measurement data can be checked

(proportional to measurement range) (proportional to measurement range) (proportional to measurement range) (proportional to measurement range) in the gateway

10…30 V DC
No
10…30 V DC
No
21.6…25.6 V DC
No
21.6…25.6 V DC
No
No external power supply
No F
No No No No Yes
Edelstahl 1.4404 (V4A),
Stainless Steal 1.44 V2A Stainless Steal 1.44 V2A Stainless steel 1.44 V2A / V4A Stainless Steal 1.44 V2A
AISI 316L & plastic PA 66
M12 Plug connector, 4-pin M12 Plug connector, 4-pin M12 Plug connector, 8-pin M12 Plug connector, 8-pin kein

XX X X X XXX
Frequency range Temperature range head Interface electric Interface mechanic Spezial differentiation tbd
00 VIB20/4x/6x 10 … 1 000 Hz (Standard) A VIB2X -40°C...+85°C 0 M12 Plug (Standard) 0 VIB2X M8x8, thread pitch 1,25 (Standard) 000 no special features
01 VIB22 IOLink 10 … 1 000 Hz config B VIB4X -40°C...+125°C A 2m cable 0 VIB4X M8x8, thread pitch 1,25 (Standard) …
02 VIB24 IOLink 1 … 1 000 Hz config, C VIB6X -40°C...+85°C B 5m cable A VIB4X SPM thread cone
10 … 10 000 Hz crest & bearing indicator
03 VIB4X/6X 1 … 1 000 Hz D VIB6X -35°C...+125°C C 10m cable B VIB4X M8x8 inner thread
E VIB6X -20°C...+125°C 0 VIB6x Hole (Standard)

3043800000 F.5
 u-sense vibration – Wireless sensors

Wireless condition monitoring of machines through vibration analysis

Sensors - u-sense

u-sense vibration VIB1 wireless sensor for easy retrofitting

The Industrial Internet of Things concept has great potential for retrofitting
existing systems that have not yet been digitised in any way. The
US67-V1T-BLE wireless radio vibration sensor is ideal for easy retrofitting in
existing systems.
It is powered by a replaceable battery and communicates via Bluetooth
with Weidmüller gateways and controllers. This makes it quick and easy to
monitor the condition of existing and new machines without the need for
extensive installation work on the machines.
The sensor is suitable for use in production, water management and, thanks
to its Ex certification for Zone 2, also in the process industry.

F.6 3043800000
 u-sense vibration – Wireless sensors

Wireless sensors US67-V1T-BLE

Sensors - u-sense
Technical data
General data
Diameter 66 mm
Height 55.5 mm
Air pressure (operation) ≥ 795 hPa (height ≤ 2000 m) as per DIN EN 61131-2
Protection degree IP67, IP66
Sensor data
Output interval 10s, 10m, 1h
Sensor measuring method acc. to ISO10816-3 3-axis broadband analysis 10 Hz...1 kHz, VRMS
Monitored value Temperature
Type of sensor Temperature MEMS
Measurement accuracy +/-1°C
Spectral analysis method (FFT) 3-axis spectral analysis 10 Hz...3,3 kHz, acceleration spectrum
Transmission intervall of signals 10 s, 10 min, 1 h
Frequency range 10...3300 Hz

F
Measured temperature value -20...60 °C
Sampling frequency 6.6 kHz
Monitored value Acceleration
Type of sensor tri-axial MEMS
Monitoring Vibration monitoring acc. to DIN ISO 10816-3
Communication
Communication range, max., line-of sight 90 m
Communication range, max., in shop floor 30 m
Bluetooth module Bluetooth Low Energy, 2.4 GHz RF Transceiver
Power supply
Battery type Lithium
Battery voltage 3.6 V
Battery capacity 2.2 Ah
Battery lifetime Typ. 3 years (at a transmission interval of 1h and an operating
temperature between +15°C…+25°C)
Insulation coordination
Surge voltage category II
Rated voltage 50 V secondary circuits
Pollution severity 2
Enclosure
Cover material PA 66
Socket material Stainless steel
Installation
Type of mounting sensor Many possibilities using adapters, Direct mounting: screw connection

Sealing with tie possible Yes

Mounting thread M8
Note

Ordering data
Type Qty. Order No.
US67-V1T-BLE 1 2751260000
Note

3043800000 F.7
 u-sense vibration – Wireless sensors

A quick introduction to the monitoring of machines and systems

Sensors - u-sense

u-sense VIB1 pilot kit – measuring system for easy field testing

With our Pilot-Kit, you can test vibration analysis with u-sense vibration quickly
and easily on your machine. The sensor records vibration and temperature data
from your machine and sends it wirelessly to the gateway, where it is displayed in
the easy-to-use, open-source Node-RED development environment. All you need is
your browser.

The Pilot-Kit includes the hardware as well as the application software on the
gateway for local visualisation, storage and monitoring of the measured values.
The application software also offers the option of connecting to additional data
services (multi-connectivity).

Your special advantages:

• Quick and easy data collection on your machine
• Local visualisation and monitoring

F
• Multi-connectivity for local, on-premise, and cloud integration

F.8 3043800000
 u-sense vibration – Wireless sensors

Sensors - u-sense
Wireless data transmission
The sensor transmits the data to the
gateway via Bluetooth and from there
to other data services via an optional
Testing at the customer site
mobile phone connection.
With our Pilot-Kit, you can test vibration analysis
quickly and easily on your machine.

F
Kit with hardware and software
The pilot kit consists of the sensor, the
gateway in a robust FieldPower enclosure
and the application software.

Start with prepared dashboards

The local software on the gateway
visualises the measured values in real
time and communicates them to various
data platforms.

3043800000 F.9
 u-sense vibration – Cable sensors – Introduction

Continuous condition monitoring in real time

Sensors - u-sense

Robust wired u-sense vibration sensors of the VIB2x/4x/6x series

In addition to the wireless sensor, Weidmüller’s portfolio of vibration sensors

also includes wired sensors. Although they require more effort to install,
they offer the operational advantage of no battery changes. In addition,
wired sensors measure continuously and are also suitable for machines that
frequently change their operating states.
The wired vibration sensors of the VIB2x, VIB4x, and VIB6x series are
powered and read via an analogue current interface (4...20 mA). They
also provide digital switching outputs to signal out-of-limit conditions. The
VIB22 and VIB24 series have an IO-Link interface for the configuration and
communication of extended measured values. With Ex and SIL certification,
Weidmüller’s wired sensors are suitable for a wide range of industries and SIL
applications.

F.10 3043800000
 u-sense vibration – Cable sensors – Introduction

Sensors - u-sense
Condition-based machine monitoring in
SIL2/Pl d and explosion protection with
our VIB6x series
• SIL2 TÜV certified
• Selectable alarm thresholds
• Ex-certified for zones 1/2

Condition monitoring with

sensors from the VIB2x series
VIB4x - analog vibration sensors in • With IO-Link
high-quality stainless steel design • Compact
• Ex-certified • High OEE
• Compact • Fast commissioning
• Robust
• Reliable

3043800000 F.11
 u-sense vibration – Cable sensors – VIB2x

Effective vibration monitoring with IO-Link

Sensors - u-sense

Condition monitoring with compact sensors from the VIB2x series

Vibration monitoring with sensors from the VIB2x series enables

the measurement of vibration speed, vibration acceleration
and temperature and can be used, for example, to monitor
absolute bearing vibration on machines in accordance with the
DIN ISO 10816 standard.

The IO-Link types also allow the individual adjustment and

modification of parameters via IO-Link communication.

Your special advantages:

• With IO-Link
• Compact
• High OEE
• Fast commissioning

The product key and the selection table for

all u-sense sensors can be found on pages
F.4 and F.5.

F.12 3043800000
 u-sense vibration – Cable sensors – VIB2x

Cable sensors - VIB2x US67-VIB20C-ANA-00160000A00000 US67-VIB20C-ANA-00320000A00000

Basic product VIB20 Measuring range: 0...32mm/s

Sensors - u-sense
Technical data
General data
Operating life 10 years 10 years
Protection degree IP67 (in plugged condition), IP66 (in plugged condition) IP67 (in plugged condition), IP66 (in plugged condition)
For Ex zone dust None None
For Ex zone gas None None
Explosion protection type
Safety category No No
Machine vibration assessment included Yes Yes
Installation location Indoor and outdoor use Indoor and outdoor use
Material Stainless steel 1.4305 (V2A), AISI 303 (standard) Stainless steel 1.4305 (V2A), AISI 303 (standard)
Ambient temperature -40...80 °C -40...80 °C
Sensor data
Number of measuring axes 1 1
Sensor measuring method acc. to ISO10816-3 1-axis broadband analysis 10 Hz...1 kHz, VRMS 1-axis broadband analysis 10 Hz...1 kHz, VRMS

F
Spectral analysis method (FFT) No FFT calculation No FFT calculation
Transmission intervall of signals Continuous measurement Continuous measurement
Temperature measurement available No No
Temperature range measuring head -40...85°C -40...85°C
Vibration acceleration (gravity g) -15...15 -15...15
Effective vibration velocity ...16 mm/s ...32 mm/s
Accuracy of vibration measurement 10 % 10 %
Frequency range 10...1000 Hz 10...1000 Hz
Frequency range configurable No No
Measuring and process variables RMS vibration velocity RMS vibration velocity

Electrical data / connection

Voltage supply 18...30 V DC 18...30 V DC
Output signal 4...20 mA (proportional to measuring range) 4...20 mA (proportional to measuring range)
IO-Link available No No
Connection type of IO-Link interface
Wireless No No
Connection type M12 M12
Cable length
Plug 1x M12 female 4-pole 1x M12 female 4-pole
Sensor installation
Connection thread M8 thread M8 thread
Type of mounting sensor Many possibilities using adapters, Direct mounting: screw connection Direct mounting: screw connection, Many possibilities using adapters

Tightening torque 8 Nm 8 Nm
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
US67-VIB20C-ANA-00160000A00000 1 3094340000 US67-VIB20C-ANA-00320000A00000 1 3094350000
Note

3043800000 F.13
 u-sense vibration – Cable sensors – VIB2x

Cable sensors - VIB2x US67-VIB20C-ANA-0016A000A00000 US67-VIB20C-ANA-00160A00A00000

Further approval: SIL1 Housing material: 1.4404 (V4A)
Sensors - u-sense

Technical data
General data
Operating life 10 years 10 years
Protection degree IP67 (in plugged condition), IP66 (in plugged condition) IP67 (in plugged condition), IP66 (in plugged condition)
For Ex zone dust None None
For Ex zone gas None None
Explosion protection type
Safety category SIL 1 No
Machine vibration assessment included Yes Yes
Installation location Indoor and outdoor use Indoor and outdoor use
Material Stainless steel 1.4305 (V2A), AISI 303 (standard) Stainless steel 1.4404 (V4A), AISI 316L
Ambient temperature -40...80 °C -40...80 °C
Sensor data
Number of measuring axes 1 1
Sensor measuring method acc. to ISO10816-3 1-axis broadband analysis 10 Hz...1 kHz, VRMS 1-axis broadband analysis 10 Hz...1 kHz, VRMS

F
Spectral analysis method (FFT) No FFT calculation No FFT calculation
Transmission intervall of signals Continuous measurement Continuous measurement
Temperature measurement available No No
Temperature range measuring head -40...85°C -40...85°C
Vibration acceleration (gravity g) -15...15 -15...15
Effective vibration velocity ...16 mm/s ...16 mm/s
Accuracy of vibration measurement 10 % 10 %
Frequency range 10...1000 Hz 10...1000 Hz
Frequency range configurable No No
Measuring and process variables RMS vibration velocity RMS vibration velocity

Electrical data / connection

Voltage supply 18...30 V DC 18...30 V DC
Output signal 4...20 mA (proportional to measuring range) 4...20 mA (proportional to measuring range)
IO-Link available No No
Connection type of IO-Link interface
Wireless No No
Connection type M12 M12
Cable length
Plug 1x M12 female 4-pole 1x M12 female 4-pole
Sensor installation
Connection thread M8 thread M8 thread
Type of mounting sensor Many possibilities using adapters, Direct mounting: screw connection Direct mounting: screw connection, Many possibilities using adapters

Tightening torque 8 Nm 8 Nm
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
US67-VIB20C-ANA-0016A000A00000 1 3094360000 US67-VIB20C-ANA-00160A00A00000 1 3094370000
Note

F.14 3043800000
 u-sense vibration – Cable sensors – VIB2x

Cable sensors - VIB2x US67-VIB22C-IOL-0UNI0001A00000 US67-VIB22C-IOL-0UNI0A01A00000

Basic product VIB22 Housing material: 1.4404 (V4A)

Sensors - u-sense
Technical data
General data
Operating life 10 years 10 years
Protection degree IP67 (in plugged condition), IP66 (in plugged condition) IP67 (in plugged condition), IP66 (in plugged condition)
For Ex zone dust None None
For Ex zone gas None None
Explosion protection type
Safety category No No
Machine vibration assessment included Yes Yes
Installation location Indoor and outdoor use Indoor and outdoor use
Material Stainless steel 1.4305 (V2A), AISI 303 (standard) Stainless steel 1.4404 (V4A), AISI 316L
Ambient temperature -40...80 °C -40...80 °C
Sensor data
Number of measuring axes 1 1
Sensor measuring method acc. to ISO10816-3 1-axis broadband analysis 10 Hz...1 kHz, VRMS 1-axis broadband analysis 10 Hz...1 kHz, VRMS

F
Spectral analysis method (FFT) No FFT calculation No FFT calculation
Transmission intervall of signals Continuous measurement Continuous measurement
Temperature measurement available Yes Yes
Temperature range measuring head -40...85°C -40...85°C
Vibration acceleration (gravity g) -15...15 -15...15
Effective vibration velocity ...64 mm/s ...64 mm/s
Accuracy of vibration measurement 10 % 10 %
Frequency range 10...1000 Hz 10...1000 Hz
Frequency range configurable Yes Yes
Measuring and process variables Peak value vibration acceleration, RMS vibration velocity, RMS Peak value vibration acceleration, RMS vibration acceleration, RMS
vibration acceleration, Temperature, Status of the internal self-test, vibration velocity, Temperature, Status of the internal self-test, Error
Error status, States of all switching signals, Crest value, Bearing status, States of all switching signals, Crest value, Bearing condition
condition parameter according to 13337-3 parameter according to 13337-3
Electrical data / connection
Voltage supply 18...30 V DC 18...30 V DC
Output signal 4...20 mA (proportional to measuring range) 4...20 mA (proportional to measuring range)
IO-Link available Yes Yes
Connection type of IO-Link interface IO-Link V1.1.3 IO-Link V1.1.3
Wireless No No
Connection type M12 M12
Cable length
Plug 1x M12 female 4-pole 1x M12 female 4-pole
Sensor installation
Connection thread M8 thread M8 thread
Type of mounting sensor Many possibilities using adapters, Direct mounting: screw connection Direct mounting: screw connection, Many possibilities using adapters

Tightening torque 8 Nm 8 Nm
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
US67-VIB22C-IOL-0UNI0001A00000 1 3094380000 US67-VIB22C-IOL-0UNI0A01A00000 1 3094630000
Note

3043800000 F.15
 u-sense vibration – Cable sensors – VIB2x

Cable sensors - VIB2x US67-VIB24C-IOL-0UNI0002A00000 US67-VIB24C-IOL-0UNI0A02A00000

Basic product VIB24 Housing material: 1.4404 (V4A)
Sensors - u-sense

Technical data
General data
Operating life 10 years 10 years
Protection degree IP67 (in plugged condition), IP66 (in plugged condition) IP67 (in plugged condition), IP66 (in plugged condition)
For Ex zone dust None None
For Ex zone gas None None
Explosion protection type
Safety category No No
Machine vibration assessment included Yes Yes
Installation location Indoor and outdoor use Indoor and outdoor use
Material Stainless steel 1.4305 (V2A), AISI 303 (standard) Stainless steel 1.4404 (V4A), AISI 316L
Ambient temperature -40...80 °C -40...80 °C
Sensor data
Number of measuring axes 1 1
Sensor measuring method acc. to ISO10816-3 1-axis broadband analysis 10 Hz...1 kHz, VRMS 1-axis broadband analysis 10 Hz...1 kHz, VRMS

F
Spectral analysis method (FFT) No FFT calculation No FFT calculation
Transmission intervall of signals Continuous measurement Continuous measurement
Temperature measurement available Yes Yes
Temperature range measuring head -40...85°C -40...85°C
Vibration acceleration (gravity g) -48...48 -48...48
Effective vibration velocity ...64 mm/s ...64 mm/s
Accuracy of vibration measurement 10 % 10 %
Frequency range 1...12000 Hz 1...12000 Hz
Frequency range configurable Yes Yes
Measuring and process variables RMS vibration acceleration, RMS vibration velocity, Peak value RMS vibration acceleration, RMS vibration velocity, Peak value
vibration acceleration, Temperature, Status of the internal self-test, vibration acceleration, Temperature, Status of the internal self-test,
Error status, States of all switching signals, Crest value, Bearing Error status, States of all switching signals, Crest value, Bearing
condition parameter according to 13337-3 condition parameter according to 13337-3
Electrical data / connection
Voltage supply 18...30 V DC 18...30 V DC
Output signal 4...20 mA (proportional to measuring range) 4...20 mA (proportional to measuring range)
IO-Link available Yes Yes
Connection type of IO-Link interface IO-Link V1.1.3 IO-Link V1.1.3
Wireless No No
Connection type M12 M12
Cable length
Plug 1x M12 female 4-pole 1x M12 female 4-pole
Sensor installation
Connection thread M8 thread M8 thread
Type of mounting sensor Many possibilities using adapters, Direct mounting: screw connection Many possibilities using adapters, Direct mounting: screw connection

Tightening torque 8 Nm 8 Nm
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
US67-VIB24C-IOL-0UNI0002A00000 1 3094640000 US67-VIB24C-IOL-0UNI0A02A00000 1 3094650000
Note

F.16 3043800000
3043800000
F.17
F

Sensors - u-sense
 u-sense vibration – Cable sensors – VIB 4x

Smart condition monitoring – analogue vibration monitoring

Sensors - u-sense

VIB4x – analogue vibration sensors in a high-quality stainless steel design

The VIB4x series provides you with analogue vibration sensors in a

high-quality stainless steel design and with two-wire technology. Monitor
and protect rotating machines in different frequency and measurement
ranges. The VIB4x series offers extensive Ex approvals for zones 1/21 and
2/22, such as cULus Hazardous Location DIV2.

Your special advantages:

• Ex-certified
• Compact
• Robust
• Reliable

The product key and the selection table for

all u-sense sensors can be found on pages
F.4 and F.5.

F.18 3043800000
 u-sense vibration – Cable sensors – VIB4x

Cable sensors - VIB4x US67-VIB40C-ANA-00160000B00000 US67-VIB40C-ANA-00160003B00000

Basic product VIB40 Frequency range: 1...1000Hz

Sensors - u-sense
Technical data
General data
Operating life 10 years 10 years
Protection degree IP67 (in plugged condition), IP66 (in plugged condition) IP67 (in plugged condition), IP66 (in plugged condition)
For Ex zone dust None None
For Ex zone gas None None
Explosion protection type
Safety category No No
Machine vibration assessment included Yes Yes
Installation location Indoor and outdoor use Indoor and outdoor use
Material Stainless steel 1.4305 (V2A), AISI 303 (standard) Stainless steel 1.4305 (V2A), AISI 303 (standard)
Ambient temperature -40...60 °C -40...60 °C
Sensor data
Number of measuring axes 1 1
Sensor measuring method acc. to ISO10816-3 1-axis broadband analysis 10 Hz...1 kHz, VRMS 1-axis broadband analysis 10 Hz...1 kHz, VRMS

F
Spectral analysis method (FFT) No FFT calculation No FFT calculation
Transmission intervall of signals Continuous measurement Continuous measurement
Temperature measurement available No No
Temperature range measuring head -40...125°C -40...125°C
Vibration acceleration (gravity g) -16.5...16.5 -16.5...16.5
Effective vibration velocity ...16 mm/s ...16 mm/s
Accuracy of vibration measurement 10 % 10 %
Frequency range 10...1000 Hz 1...1000 Hz
Frequency range configurable No No
Measuring and process variables RMS vibration velocity RMS vibration velocity
Electrical data / connection
Voltage supply 10…30 V DC 10…30 V DC
Output signal 4...20 mA (proportional to measuring range) 4...20 mA (proportional to measuring range)
IO-Link available No No
Connection type of IO-Link interface
Wireless No No
Connection type M12 M12
Cable length
Plug 1x M12 female 4-pole 1x M12 female 4-pole
Sensor installation
Connection thread M8 thread M8 thread
Type of mounting sensor Direct mounting: screw connection, Many possibilities using adapters Direct mounting: screw connection, Many possibilities using adapters

Tightening torque 8 Nm 8 Nm
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
US67-VIB40C-ANA-00160000B00000 1 3094660000 US67-VIB40C-ANA-00160003B00000 1 3094750000
Note

3043800000 F.19
 u-sense vibration – Cable sensors – VIB4x

Cable sensors - VIB4x US67-VIB40C-ANA-00160A00B00000 US67-VIB40C-ANA-A0160000BB0000

Housing material: 1.4404 (V4A) Ex area: Ex-d, with cable
Sensors - u-sense

Technical data
General data
Operating life 10 years 10 years
Protection degree IP67 (in plugged condition), IP66 (in plugged condition) IP67 (in plugged condition), IP66 (in plugged condition)
For Ex zone dust None 21, 22
For Ex zone gas None 1, 2
Explosion protection type Ex d - flameproof, Ex tb
Safety category No No
Machine vibration assessment included Yes Yes
Installation location Indoor and outdoor use Indoor and outdoor use
Material Stainless steel 1.4404 (V4A), AISI 316L Stainless steel 1.4305 (V2A), AISI 303 (standard)
Ambient temperature -40...60 °C -40...60 °C
Sensor data
Number of measuring axes 1 1
Sensor measuring method acc. to ISO10816-3 1-axis broadband analysis 10 Hz...1 kHz, VRMS 1-axis broadband analysis 10 Hz...1 kHz, VRMS

F
Spectral analysis method (FFT) No FFT calculation No FFT calculation
Transmission intervall of signals Continuous measurement Continuous measurement
Temperature measurement available No No
Temperature range measuring head -40...125°C -40...125°C
Vibration acceleration (gravity g) -16.5...16.5 -16.5...16.5
Effective vibration velocity ...16 mm/s ...16 mm/s
Accuracy of vibration measurement 10 % 10 %
Frequency range 10...1000 Hz 10...1000 Hz
Frequency range configurable No No
Measuring and process variables RMS vibration velocity RMS vibration velocity
Electrical data / connection
Voltage supply 10…30 V DC 10…30 V DC
Output signal 4...20 mA (proportional to measuring range) 4...20 mA (proportional to measuring range)
IO-Link available No No
Connection type of IO-Link interface
Wireless No No
Connection type M12 Cable
Cable length
Plug 1x M12 female 4-pole 1x M12 female 5-pole
Sensor installation
Connection thread M8 thread M8 thread
Type of mounting sensor Direct mounting: screw connection, Many possibilities using adapters Direct mounting: screw connection, Many possibilities using adapters

Tightening torque 8 Nm 8 Nm
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
US67-VIB40C-ANA-00160A00B00000 1 3094790000 US67-VIB40C-ANA-A0160000BB0000 1 3094870000
Note

F.20 3043800000
 u-sense vibration – Cable sensors – VIB4x

Cable sensors - VIB4x US67-VIB40C-ANA-B0160000B00000 US67-VIB40C-ANA-00320000B00000

Ex area: Ex-i Measuring range: 0...32mm/s

Sensors - u-sense
Technical data
General data
Operating life 10 years 10 years
Protection degree IP67 (in plugged condition), IP66 (in plugged condition) IP67 (in plugged condition), IP66 (in plugged condition)
For Ex zone dust 21, 22 None
For Ex zone gas 1, 2 None
Explosion protection type Ex ib
Safety category No No
Machine vibration assessment included Yes Yes
Installation location Indoor and outdoor use Indoor and outdoor use
Material Stainless steel 1.4305 (V2A), AISI 303 (standard) Stainless steel 1.4305 (V2A), AISI 303 (standard)
Ambient temperature -40...60 °C -40...60 °C
Sensor data
Number of measuring axes 1 1
Sensor measuring method acc. to ISO10816-3 1-axis broadband analysis 10 Hz...1 kHz, VRMS 1-axis broadband analysis 10 Hz...1 kHz, VRMS

F
Spectral analysis method (FFT) No FFT calculation No FFT calculation
Transmission intervall of signals Continuous measurement Continuous measurement
Temperature measurement available No No
Temperature range measuring head -40...125°C -40...125°C
Vibration acceleration (gravity g) -16.5...16.5 -16.5...16.5
Effective vibration velocity ...16 mm/s ...32 mm/s
Accuracy of vibration measurement 10 % 10 %
Frequency range 10...1000 Hz 10...1000 Hz
Frequency range configurable No No
Measuring and process variables RMS vibration velocity RMS vibration velocity
Electrical data / connection
Voltage supply 10…30 V DC 10…30 V DC
Output signal 4...20 mA (proportional to measuring range) 4...20 mA (proportional to measuring range)
IO-Link available No No
Connection type of IO-Link interface
Wireless No No
Connection type M12 M12
Cable length
Plug 1x M12 female 4-pole 1x M12 female 4-pole
Sensor installation
Connection thread M8 thread M8 thread
Type of mounting sensor Direct mounting: screw connection, Many possibilities using adapters Many possibilities using adapters, Direct mounting: screw connection

Tightening torque 8 Nm 8 Nm
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
US67-VIB40C-ANA-B0160000B00000 1 3094880000 US67-VIB40C-ANA-00320000B00000 1 3094960000
Note

3043800000 F.21
 u-sense vibration – Cable sensors – VIB4x

Cable sensors - VIB4x US67-VIB40C-ANA-C0160000B00000 US67-VIB42C-ANA-00160000B00000

Ex area: UL Div 2 Basic product VIB42/44/46
Sensors - u-sense

Technical data
General data
Operating life 10 years 10 years
Protection degree IP67 (in plugged condition), IP66 (in plugged condition) IP67 (in plugged condition), IP66 (in plugged condition)
For Ex zone dust None None
For Ex zone gas None None
Explosion protection type
Safety category No No
Machine vibration assessment included Yes Yes
Installation location Indoor and outdoor use Indoor and outdoor use
Material Stainless steel 1.4305 (V2A), AISI 303 (standard) Stainless steel 1.4305 (V2A), AISI 303 (standard)
Ambient temperature -40...60 °C -40...60 °C
Sensor data
Number of measuring axes 1 1
Sensor measuring method acc. to ISO10816-3 1-axis broadband analysis 10 Hz...1 kHz, VRMS 1-axis broadband analysis 10 Hz...1 kHz, VRMS

F
Spectral analysis method (FFT) No FFT calculation No FFT calculation
Transmission intervall of signals Continuous measurement Continuous measurement
Temperature measurement available No Yes
Temperature range measuring head -40...125°C -40...125°C
Vibration acceleration (gravity g) -16.5...16.5 -16.5...16.5
Effective vibration velocity ...16 mm/s ...16 mm/s
Accuracy of vibration measurement 10 % 10 %
Frequency range 10...1000 Hz 10...1000 Hz
Frequency range configurable No No
Measuring and process variables RMS vibration velocity RMS vibration velocity
Electrical data / connection
Voltage supply 10…30 V DC 10…30 V DC
Output signal 4...20 mA (proportional to measuring range) 2x 4...20 mA (proportional to measuring range)
IO-Link available No No
Connection type of IO-Link interface
Wireless No No
Connection type M12 M12
Cable length
Plug 1x M12 female 4-pole 1x M12 female 4-pole
Sensor installation
Connection thread M8 thread M8 thread
Type of mounting sensor Many possibilities using adapters, Direct mounting: screw connection Direct mounting: screw connection, Many possibilities using adapters

Tightening torque 8 Nm 8 Nm
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
US67-VIB40C-ANA-C0160000B00000 1 3095030000 US67-VIB42C-ANA-00160000B00000 1 3095040000
Note

F.22 3043800000
 u-sense vibration – Cable sensors – VIB4x

Cable sensors - VIB4x US67-VIB44C-ANA-0A080000B00000 US67-VIB46C-ANA-00160003B00000

Measuring range: 0...8g Frequency range: 1...1000Hz

Sensors - u-sense
Technical data
General data
Operating life 10 years 10 years
Protection degree IP67 (in plugged condition), IP66 (in plugged condition) IP67 (in plugged condition), IP66 (in plugged condition)
For Ex zone dust None None
For Ex zone gas None None
Explosion protection type
Safety category No No
Machine vibration assessment included Yes Yes
Installation location Indoor and outdoor use Indoor and outdoor use
Material Stainless steel 1.4305 (V2A), AISI 303 (standard) Stainless steel 1.4305 (V2A), AISI 303 (standard)
Ambient temperature -40...60 °C -40...60 °C
Sensor data
Number of measuring axes 1 1
Sensor measuring method acc. to ISO10816-3 1-axis broadband analysis 10 Hz...1 kHz, VRMS

F
Spectral analysis method (FFT) No FFT calculation No FFT calculation
Transmission intervall of signals Continuous measurement Continuous measurement
Temperature measurement available No No
Temperature range measuring head -40...125°C -40...125°C
Vibration acceleration (gravity g) -16.5...16.5 -16.5...16.5
Effective vibration velocity ...64 mm/s ...16 mm/s
Accuracy of vibration measurement 10 % 10 %
Frequency range 10...1000 Hz 1...1000 Hz
Frequency range configurable No No
Measuring and process variables RMS vibration acceleration RMS vibration velocity
Electrical data / connection
Voltage supply 10…30 V DC 10…30 V DC
Output signal 4...20 mA (proportional to measuring range) 4...20 mA (proportional to measuring range)
IO-Link available No No
Connection type of IO-Link interface
Wireless No No
Connection type M12 M12
Cable length
Plug 1x M12 female 4-pole 1x M12 female 4-pole
Sensor installation
Connection thread M8 thread M8 thread
Type of mounting sensor Many possibilities using adapters, Direct mounting: screw connection Many possibilities using adapters, Direct mounting: screw connection

Tightening torque 8 Nm 8 Nm
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
US67-VIB44C-ANA-0A080000B00000 1 3095050000 US67-VIB46C-ANA-00160003B00000 1 3095130000
Note

3043800000 F.23
 u-sense vibration – Cable sensors – VIB6x

Smart condition monitoring – secure vibration monitoring

Sensors - u-sense

Condition-based machine monitoring in SIL2/PL d and in explosion protection

The vibration sensors in the VIB6x series offer condition-based

monitoring of systems and machines in SIL2/PL d and, depending on
requirements, also in explosion protection. Depending on the type, they
can be used in a temperature range from –40 to 125°C. Another feature
is switching outputs with adjustable delay times.

This ensures a long service life and the safe, efficient operation of SIL
machines and systems.

Your special advantages:

• SIL2 TÜV certified
• Selectable alarm thresholds
• Ex-certified
• Compact

The product key and the selection table for

all u-sense sensors can be found on pages
F.4 and F.5.

F.24 3043800000
 u-sense vibration – Cable sensors – VIB6x

Cable sensors – VIB6x US67-VIB60C-ANA-0016B000C00000 US67-VIB60C-ANA-D016B000CB0000

Basic product VIB60 Ex area: 1 / 21, with cable

Sensors - u-sense
Technical data
General data
Operating life 10 years 10 years
Protection degree IP66 (cover and plug connection closed), IP67 (cover and plug IP66 (cover and plug connection closed), IP67 (cover and plug
connection closed) connection closed)
For Ex zone dust None
For Ex zone gas None
Explosion protection type Ex tb, Ex d - flameproof
Safety category SIL 2 SIL 2
Machine vibration assessment included Yes Yes
Installation location Indoor and outdoor use Indoor and outdoor use
Material Stainless steel 1.4305 (V2A), AISI 303 (standard) Stainless steel 1.4305 (V2A), AISI 303 (standard)
Ambient temperature -40...60 °C -40...60 °C
Sensor data
Number of measuring axes 1 1

F
Sensor measuring method acc. to ISO10816-3 1-axis broadband analysis 10 Hz...1 kHz, VRMS 1-axis broadband analysis 10 Hz...1 kHz, VRMS
Spectral analysis method (FFT) No FFT calculation No FFT calculation
Transmission intervall of signals Continuous measurement Continuous measurement
Temperature measurement available No No
Temperature range measuring head -40...85°C -40...85°C
Vibration acceleration (gravity g) -16.5...16.5 -16.5...16.5
Effective vibration velocity ...16 mm/s ...16 mm/s
Accuracy of vibration measurement 10 % 10 %
Frequency range 10...1000 Hz 10...1000 Hz
Frequency range configurable No No
Measuring and process variables RMS vibration velocity RMS vibration velocity
Electrical data / connection
Voltage supply 21,6…25,6 V DC 21,6…25,6 V DC
Output signal 4...20 mA (proportional to measuring range) 4...20 mA (proportional to measuring range)
IO-Link available No No
Connection type of IO-Link interface
Wireless No No
Connection type M12 Cable
Cable length
Plug
Sensor installation
Connection thread Threaded hole on mounting surface: M8, 15 mm Threaded hole on mounting surface: M8, 15 mm
Type of mounting sensor Many possibilities using adapters, Direct mounting: screw connection, Many possibilities using adapters, Direct mounting: screw connection,
Hexagon socket head cap screw M8x20 Hexagon socket head cap screw M8x20

Tightening torque 8 Nm 8 Nm
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
US67-VIB60C-ANA-0016B000C00000 1 3095140000 US67-VIB60C-ANA-D016B000CB0000 1 3095160000
Note

3043800000 F.25
 u-sense vibration – Cable sensors – VIB6x

Cable sensors – VIB6x US67-VIB60C-ANA-E016B000C00000 US67-VIB60C-ANA-0032B000C00000

Ex area: 2 / 22, UL Div 2 Measuring range: 0...32mm/s
Sensors - u-sense

Technical data
General data
Operating life 10 years 10 years
Protection degree IP67 (cover and plug connection closed), IP66 (cover and plug IP67 (cover and plug connection closed), IP66 (cover and plug
connection closed) connection closed)
For Ex zone dust None
For Ex zone gas None
Explosion protection type Ex e
Safety category SIL 2 SIL 2
Machine vibration assessment included Yes Yes
Installation location Indoor and outdoor use Indoor and outdoor use
Material Stainless steel 1.4305 (V2A), AISI 303 (standard) Stainless steel 1.4305 (V2A), AISI 303 (standard)
Ambient temperature -40...60 °C -40...60 °C
Sensor data
Number of measuring axes 1 1

F
Sensor measuring method acc. to ISO10816-3 1-axis broadband analysis 10 Hz...1 kHz, VRMS 1-axis broadband analysis 10 Hz...1 kHz, VRMS
Spectral analysis method (FFT) No FFT calculation No FFT calculation
Transmission intervall of signals Continuous measurement Continuous measurement
Temperature measurement available No No
Temperature range measuring head -40...85°C -40...85°C
Vibration acceleration (gravity g) -16.5...16.5 -16.5...16.5
Effective vibration velocity ...16 mm/s ...32 mm/s
Accuracy of vibration measurement 10 % 10 %
Frequency range 10...1000 Hz 10...1000 Hz
Frequency range configurable No No
Measuring and process variables RMS vibration velocity RMS vibration velocity
Electrical data / connection
Voltage supply 21,6…25,6 V DC 21,6…25,6 V DC
Output signal 4...20 mA (proportional to measuring range) 4...20 mA (proportional to measuring range)
IO-Link available No No
Connection type of IO-Link interface
Wireless No No
Connection type M12 M12
Cable length
Plug
Sensor installation
Connection thread Threaded hole on mounting surface: M8, 15 mm Threaded hole on mounting surface: M8, 15 mm
Type of mounting sensor Direct mounting: screw connection, Many possibilities using adapters, Hexagon socket head cap screw M8x20, Many possibilities using
Hexagon socket head cap screw M8x20 adapters, Direct mounting: screw connection

Tightening torque 8 Nm 8 Nm
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
US67-VIB60C-ANA-E016B000C00000 1 3095190000 US67-VIB60C-ANA-0032B000C00000 1 3095410000
Note

F.26 3043800000
 u-sense vibration – Cable sensors – VIB6x

Cable sensors – VIB6x US67-VIB60C-ANA-0016BA00C00000 US67-VIB60C-ANA-0016B003C00000

Housing material: 1.4404 (V4A) Frequency range: 1...1000Hz

Sensors - u-sense
Technical data
General data
Operating life 10 years 10 years
Protection degree IP66 (cover and plug connection closed), IP67 (cover and plug IP66 (cover and plug connection closed), IP67 (cover and plug
connection closed) connection closed)
For Ex zone dust None None
For Ex zone gas None None
Explosion protection type
Safety category SIL 2 SIL 2
Machine vibration assessment included Yes Yes
Installation location Indoor and outdoor use Indoor and outdoor use
Material Stainless steel 1.4404 (V4A), AISI 316L Stainless steel 1.4305 (V2A), AISI 303 (standard)
Ambient temperature -40...60 °C -40...60 °C
Sensor data
Number of measuring axes 1 1

F
Sensor measuring method acc. to ISO10816-3 1-axis broadband analysis 10 Hz...1 kHz, VRMS 1-axis broadband analysis 10 Hz...1 kHz, VRMS
Spectral analysis method (FFT) No FFT calculation No FFT calculation
Transmission intervall of signals Continuous measurement Continuous measurement
Temperature measurement available No No
Temperature range measuring head -40...85°C -40...85°C
Vibration acceleration (gravity g) -16.5...16.5 -16.5...16.5
Effective vibration velocity ...16 mm/s ...16 mm/s
Accuracy of vibration measurement 10 % 10 %
Frequency range 10...1000 Hz 1...1000 Hz
Frequency range configurable No No
Measuring and process variables RMS vibration velocity RMS vibration velocity
Electrical data / connection
Voltage supply 21,6…25,6 V DC 21,6…25,6 V DC
Output signal 4...20 mA (proportional to measuring range) 4...20 mA (proportional to measuring range)
IO-Link available No No
Connection type of IO-Link interface
Wireless No No
Connection type M12 M12
Cable length
Plug
Sensor installation
Connection thread Threaded hole on mounting surface: M8, 15 mm Threaded hole on mounting surface: M8, 15 mm
Type of mounting sensor Many possibilities using adapters, Direct mounting: screw connection, Many possibilities using adapters, Direct mounting: screw connection,
Hexagon socket head cap screw M8x20 Hexagon socket head cap screw M8x20

Tightening torque 8 Nm 8 Nm
Note

Ordering data
Type Qty. Order No. Type Qty. Order No.
US67-VIB60C-ANA-0016BA00C00000 1 3095420000 US67-VIB60C-ANA-0016B003C00000 1 3095430000
Note

3043800000 F.27
 u-sense vibration – Cable sensors – VIB6x

Cable sensors – VIB6x US67-VIB62C-ANA-0A08B000C00000

Measuring range: 0...8g
Sensors - u-sense

Technical data
General data
Operating life 10 years
Protection degree IP67 (cover and plug connection closed), IP66 (cover and plug
connection closed)
For Ex zone dust None
For Ex zone gas None
Explosion protection type
Safety category SIL 2
Machine vibration assessment included Yes
Installation location Indoor and outdoor use
Material Stainless steel 1.4305 (V2A), AISI 303 (standard)
Ambient temperature -40...60 °C
Sensor data
Number of measuring axes 1

F
Sensor measuring method acc. to ISO10816-3
Spectral analysis method (FFT) No FFT calculation
Transmission intervall of signals Continuous measurement
Temperature measurement available No
Temperature range measuring head -40...85°C
Vibration acceleration (gravity g) -16.5...16.5
Effective vibration velocity ...64 mm/s
Accuracy of vibration measurement 10 %
Frequency range 10...1000 Hz
Frequency range configurable No
Measuring and process variables RMS vibration acceleration
Electrical data / connection
Voltage supply 21,6…25,6 V DC
Output signal 4...20 mA (proportional to measuring range)
IO-Link available No
Connection type of IO-Link interface
Wireless No
Connection type M12
Cable length
Plug
Sensor installation
Connection thread Threaded hole on mounting surface: M8, 15 mm
Type of mounting sensor Hexagon socket head cap screw M8x20, Many possibilities using
adapters, Direct mounting: screw connection

Tightening torque 8 Nm
Note

Ordering data
Type Qty. Order No.
US67-VIB62C-ANA-0A08B000C00000 1 3095440000
Note

F.28 3043800000
3043800000
F.29
F

Sensors - u-sense
 Accessories

High-quality installation accessories

Sensors - u-sense

Cables, plugs, mounting adapters and magnets for professional installation

and customised use

For the professional industrial-grade installation of vibration monitoring

systems, Weidmüller offers high-quality cables, plugs, mounting adapters
and magnets for mobile use.
The table below shows the accessory category, associated articles and
usability with the sensor product groups.

F.30 3043800000
 Selection table accessoiries

Sensors - u-sense
Category Order no. Description Feature VIB1 VIB2x VIB4x VIB6x
3069360000 US67-MNT-00M08-00M06-000 M8 to M6, AF24 • • •
3069470000 US67-MNT-00M08-000M8 -CON M8 to M8 Cone, AF30 • • • •
3072980000 US67-MNT-00M08-00M10-S30 M8 to M10, AF30 • •
3073200000 US67-MNT-00M08-00M10-S24 M8 to M10, AF24 • • •
3073210000 US67-MNT-00M08-00M12-S30 M8 to M12, AF30 • •
3073300000 US67-MNT-00M08-00M12-S24 M8 to M12, AF24 • • •
3073330000 US67-MNT-00M08-00M16-000 M8 to M16, AF30 • • • •
3073360000 US67-MNT-00M08-00M20-000 M8 to M20, AF30 • • • •
Mounting adapter

3073370000 US67-MNT-00M08-00M24-000 M8 to M24, AF30 • • • •

F
3073380000 US67-MNT-00M08-00M30-000 M8 to M30, AF30 • • • •
3073540000 US67-MNT-00M08-003/8-000 M8 to 3/8” UNF 28A, AF24 • • •
3073550000 US67-MNT-00M08-01/4U-000 M8 to 1/4” UNF 28G, AF24 • • •
3073570000 US67-MNT-00M08-01/4N-000 M8 to 1/4” NPT, AF24 • • •
3073690000 US67-MNT-00M08-01/2B-000 M8 to 1/2” BSPT, AF24 • • •
3073700000 US67-MNT-00M08-0GLUE-000 M8 to glued surface • • • •
3073740000 US67-MNT-00M08-0MAG1-000 M8 to magnet, flat • • • •
3073750000 US67-MNT-00M08-0MAG2-000 M8 on magnet, convex • • • •
2811910000 US67-PLATE64-STD M8 to glued surface •
3106100500 SAIL-M12BG-4SD5.0UBL Socket-open, length 5 m •
3106101000 SAIL-M12BG-4SD10UBL Socket-open, length 15 m •
1890520500 SAIL-M12BG-8S5.0U Socket-open, length 5 m •
1890521500 SAIL-M12BG-8S15U Socket-open, length 10 m •
1812540150 SAIL-M12BG-4S1.5U Socket-open, length 1.5 m •
Sensor cable

1812540500 SAIL-M12BG-4S5.0U Socket-open, length 5 m •

1812541000 SAIL-M12BG-4S10U Socket-open, length 10 m •
3107900200 SAIL-M12BG-4SA2.0U Socket-open, length 2 m •
3107900500 SAIL-M12BG-4SA5.0U Socket-open, length 5 m •
1058500150 SAIL-M12GM12G-4S1.5U Socket-pin, length 1.5 m •
1058500500 SAIL-M12GM12G-4S5.0U Socket-pin, length 5 m •
1058501000 SAIL-M12GM12G-4S10U Socket-pin, length 10 m •
3074700000 US67-CON-VIB4x-01500 Length 1.5 m •
Protective metal hose

3074720000 US67-CON-VIB4x-04500 Length 4.5 m •

3074730000 US67-CON-VIB4x-09500 Length 9.5 m •
3074740000 US67-CON-VIB6X-01500 Length 1.5 m •
3074750000 US67-CON-VIB6X-04500 Length 4.5 m •
3074760000 US67-CON-VIB6X-09500 Length 9.5 m •
3074630000 US67-SLV-VIB2X •
Protective
rubber
sleeve

3074640000 US67-SLV-VIB4X •
3074650000 US67-SLV-VIB6X •
2757620000 US67-BAT-COSL Spare battery •
accessories
laneous
Miscel-

2874720000 US67-USB-STICK-BLE USB-Stick •

3008440000 PILOTKIT U-SENSE VIBRATION Pilot-Kit •

3043800000 F.31
 F
Sensors - u-sense

F.32
3043800000
 Contents

A comprehensive automation portfolio

A comprehensive automation portfolio

A comprehensive automation portfolio Introduction G.2

u-remote – I/O Systeme IP20 G.4

u-control – Controls and edge devices G.20

IoT-Gateways G.28

u-view – Touch Panels G.32

3043800000 G.1
 Introduction
A comprehensive automation portfolio

The easy way into Industrial IoT and automation

With our integrated and future-oriented portfolio
Build on openness

Innovative Industrial IoT and automation applications create significant added

value for our customers. The added value is mainly generated by software.
Whether energy management, remote maintenance, predictive maintenance,
asset management or classic anomaly detection – all use cases are based on
a similar mode of operation: data is collected in the field, pre-processed at the
machine (edge), converted into control commands and communicated to a central
location (cloud or on-premise system). There, software visualizes and analyses the
data and converts it into added value. From data to value.

This is how it works in a wide variety of industrial segments: From mechanical

engineering, renewable energies and shipbuilding to smart agriculture. As an
enabler, we offer you, our diverse customers, a comprehensive and universal
modular system in the field of Industrial IoT and automation. We cover all data

G
levels „from data to value“ with our hardware, software, cloud applications
and associated services. Depending on the combination and parameterisation/
configuration of the individual components, different systems are created to suit
your application.

G.2 3043800000
 Introduction

A comprehensive automation portfolio

Scalability plays a central role for us, as it gives you maximum flexibility and the
ability to map applications of varying complexity. Everything can, nothing must –
from individual components to fully vertically integrated systems. Our top
priority is to make it as easy as possible for you. Easy access to our digital services
is just one example of this. With our Industrial Service Platform easyConnect, we
make this possible throughout the entire life cycle.

We also focus on openness in terms of partnerships, technologies and products.

We believe in open source and de facto standards. In many of our industrial IoT
and automation projects, we connect ecosystems with each other through open
communication interfaces, for example, thus creating future security and the
greatest possible flexibility for you. Our open software platform for industrial IoT and
automation u-OS is a concrete example of this.

The potential around Industry 4.0 is huge. By combining Industrial IoT and
automation, we enable you to tap into individual fields of application easily,
G
efficiently, and consistently and move step by step towards Industry 4.0.

3043800000 G.3
 Introduction
A comprehensive automation portfolio

Seamless data communication in a wide range of

applications – secure, flexible, future-orientated

Industrial Ethernet components from Weidmüller are the ideal

choice for future-proof, high-performance data communication
in industrial automation. Our solutions connect Ethernet-enabled
devices reliably and flexibly and support a wide range of topologies
and protocols to adapt perfectly to any industrial application.
As a partner for first-class network infrastructures in plant and
mechanical engineering, we offer you a broad portfolio: High-quality
switches, scalable security routers, media converters, Power-over-
Ethernet switches, high-performance Wi-Fi devices and flexible
serial/Ethernet converters ensure smooth processes and maximum
efficiency. Our extensive range of RJ45 and fibre optic connectors
and cables rounds off the product range and ensures that with
Weidmüller you get a solution that will meet the highest demands
tomorrow.
Count on Weidmüller and make your Industrial Ethernet

G
infrastructure fit for the future!

Further information can be found on our website:

www.weidmueller.com/ieportfolio

Optimum power supply for automation technology

The switch-mode power supplies feature a high efficiency, compact

dimensions and minimal heat generation. They are an excellent and
reliable solution for providing power in all automation applications
– safely providing 24 V DC voltage. The different product series are
optimised for the automation industry: they feature Ex approvals
for the processing industry, a flat shape perfect for distribution
tasks within buildings and provide decentralised control voltages.
All-purpose usage: with a wide range of AC/DC inputs, single-,
double- or three-phase versions and a wide temperature range.
Additional performance increases are possible using simple parallel
connection. Weidmüller switch-mode power supplies are reliable
usable for all applications because of their high efficiency and their
resistance to both short circuits and overloads.
Weidmüller offers a system of one- and three-phase switchmode
power supplies especially for the PROtop family.

Further information can be found on our website:

www.weidmueller.com/powermanagement

G.4 3043800000
 Introduction

A comprehensive automation portfolio

Isolating amplifiers

Isolating amplifiers and measuring transducer are important

components in modern industry. They play a decisive role in safe
signal transmission and conversion, particularly due to their ability to
provide galvanic isolation and EMC filtering. These measures protect
systems from voltage peaks and at the same time ensure reliable
signal quality. Whether in the process industry or in mechanical
engineering - our solutions guarantee efficiency and safety in
sensitive applications.
With a wide range of input signals, functions and signal outputs,
such as 4-20 mA active/passive or 0-10 V, our measuring
transducers offer maximum flexibility and can be easily integrated
into existing systems.

G
Further information can be found on our website:
www.weidmueller.com/asc

3043800000 G.5
 u-remote – I/O Systeme IP20
A comprehensive automation portfolio

Achieving maximum efficiency in the control cabinet

With great savings potential and optimum system performance

u-remote from Weidmüller is the reliable interface between field bus and field level in automation.
The modular system is based on various components: a fieldbus coupler, up to 64 I/O modules,
optional power-feed modules and a wealth of accessories, such as markers and terminating
elements.

The fieldbus coupler is the central link between the various field bus standards and the u-remote
system bus. At the same time, up to 64 I/O modules are supplied via its integrated power
contacts. The well-engineered technology of the connection system enables 2 x 10 A to be
supplied for the input and output modules and the system voltage to be fully supplied through
the fieldbus coupler. Every fieldbus coupler provides direct access to the u-remote system via a
web server without additional software having to be installed. This means that the system can
be parameterised and its configuration checked. Inputs and outputs can also be checked or
influenced. The connection may take the form of an Ethernet-based field bus or micro USB. The
u-remote fieldbus couplers are integrated in the standard simple manner. The corresponding
development environments of the control systems and the device description files available online,
e.g. GSD, ESD, EDS or XML, can be used to easily perform the necessary settings.

The modularly structured I/O modules are unique in that they allow the sensor and actuator

G
wiring to be designed in both a robust and plug-in manner. This allows the electronics to be
replaced at any time even with permanent wiring. This achieves an invaluable time saving, in
terms of both wiring inaccessible cabinets and rapidly replacing sensors. Thanks to the PUSH IN
technology for up to 1.5 mm2, in their narrowest form of 11.5 mm, the modularly structured
u-remote I/O modules can be used for all sensor and actuator connections with a very high
connection density. A clear status and diagnosis display on the connection also ensures rapid and
precise checks for individual sensors and actuators.

G.6 3043800000
 u-remote – I/O Systeme IP20

A comprehensive automation portfolio

Simply plug and go
Why waste space? The plug-in connection level allows sensors and
Design your cabinets one size smaller: u-remote, actuators to be connected with pre-assembled
with the highest connection density on a cables. This means improved time benefits,
module, offers you the most slender module better handling, and minimises the number of
width and a far lower space requirement for mistakes in system wiring.
power-feed modules – an unrivaled channel
density and extremely flexible design options.

Diagnostics, even
without a control connection
u-remote simplifies machine commissioning
section-by-section and accelerates maintenance
work with its integrated web server. Thanks to
the high performance diagnostic tool, you can
simulate the functionality of inputs and outputs
prior to control connection. Intelligently separated
You can conduct plain text error analyses using u-remote separates the supply for inputs and
any standard browser – whether you're working outputs using two 10 A current paths which are
on-site or remotely. able to withstand high loads. High productivity
translates into fewer power-feed modules and
therefore more space and less planning.

3043800000 G.7
 u-remote – I/O Systeme IP20
A comprehensive automation portfolio

ModbusTCP fieldbus coupler

Web server tool,
two RJ45 Ports, 10/100 Mbit/s
System safety around the globe is provided by the ModbusTCP version, which
is stated in IEC 61158 as an Industrial Ethernet Standard. The UR20-FBC-MOD-
TCP-V2 from Weidmüller is a fieldbus coupler designed in accordance with
IEC 61158. With options for connecting up to 64 u-remote participants, it serves
as the head module for the u-remote system bus.

The coupler can be activated with a system-independent web server application

via the USB service interface or the Ethernet ports. All information, such as
diagnoses, status values and parameters, can therefore be read out. All connected
inputs can also be simulated or outputs set. The system's initial power supply
is already integrated in the fieldbus coupler. Power is supplied via two 4-pin
connectors, separated into the input and output current paths.

Since the ModbusTCP products from Weidmüller make full use of all the latest
technological possibilities, such as diagnosis options, they actively support your
application in the most important tasks – from engineering and commissioning to
fault diagnosis.

Block diagram Modbus TCP fieldbus coupler

Internal from the control card System System System

USB µC
8x bus bus bus

DC USYS USYS

DC
24 V/10 A Input

UIN UIN
RJ45
UIN

RJ45 UOUT UOUT

UOUT

24 V/10 A Output

G.8 3043800000
 u-remote – I/O Systeme IP20

A comprehensive automation portfolio

ModbusTCP UR20-FBC-MOD-TCP-V2
• 2 x 10 A current path
• Web server
• System supply for 64 I/O modules
• Temperature range: -20... +60 °C
• Dual LAN mode
• Various Modbus services

Technical data
System data
Connection type 2x RJ45 plug-in connectors
Field bus protocol Modbus/TCP MOD
Process data 1 kByte X1
TD+ 1
Parameter data 1024 Byte
TD– 2
Diagnostic data 1024 Byte
RD+ 3
max. number of modules 64 RD– 6
Configuration interface Micro USB 2.0
Transmission rate of field bus, max. 100 Mbit/s
Transmission speed of system bus, max. 48 Mbit/s X2
Supply TD+ 1
Supply voltage for inputs 24 V DC +20 %/ -15 % TD– 2
Supply voltage for outputs 24 V DC +20 %/ -15 % RD+ 3 24V DC IN
Feed current for IIN (input current path) , max. 10 A RD– 6 24 V DC IN
Feed current for IOUT (output current path) , max. 10 A GND IN
Current consumption IIN (power segment of the field bus coupler), typ. 112 mA GND IN
General data 24V DC OUT

G
Weight 223 g 24 V DC OUT
Dimensions H x W x D 120 mm / 52 mm / 76 mm GND OUT
GND OUT
Note

Ordering data
Module variants Type Qty. Order No.
Fieldbus coupler, ModbusTCP UR20-FBC-MOD-TCP-V2 1 2476450000
Note A termination kit (UR20-EBK-ACC) is included in the coupler package

Accessories
Type Qty. Order No.
Termination kit UR20-EBK-ACC 5 1346610000
Swievel marker UR20-SM-ACC 20 1339920000
Connection marker for pusher custom printing PM 2.7/2.6 MC SDR 192 1323700000
Connection marker for pusher neutral PM 2.7/2.6 MC NE WS 960 1323710000
Module marker for custom printing DEK 5/8-11.5 MC SDR 100 1341610000
Module marker for neutral DEK 5/8-11.5 MC NE WS 500 1341630000
Thermotransfer version (Material: Polyester) THM UR20 GE 1 1429910000
Thermotransfer version (material: polyester) THM UR20 WS 1 1429420000
Paper version for Laserprinter ESO UR20 DIN A4 WS 10 1429430000
USB cable (USB A to Micro USB) IE-USB-A-MICRO-1.8M 1 1487980000
Replacement parts
Plug-in connector unit UR20-PK-2476450000-SP 5 2485280000
Note 1 roll = 1000 labels = 1 Qty.
1 sheet = 60 labels = 1 unit

3043800000 G.9
 u-remote – I/O Systeme IP20
A comprehensive automation portfolio

ModbusTCP fieldbus coupler ECO

Web server tool,
two RJ45 Ports, 100 Mbit/s
System safety around the globe is provided by the Modbus TCP version, which
is stated in IEC 61158 as an Industrial Ethernet Standard. The UR20-FBC-MOD-
TCP-ECO from Weidmüller is a fieldbus coupler designed in accordance with
IEC 61158. With options for connecting up to 16 u-remote participants, it serves
as the head module for the u-remote system bus.

The coupler can be activated with a system-independent web server application

via the Ethernet ports. All information, such as diagnoses, status values and
parameters, can therefore be read out. All connected inputs can also be simulated
or outputs set. The initial system power supply is already integrated in the fieldbus
coupler.

ModbusTCP products from Weidmüller fully exploit all the possibilities of the
technology standard, e.g. through diagnostic options. In this way, they actively
support your application in the most important tasks – from engineering and
commissioning to fault diagnosis.

Block diagram Modbus TCP fieldbus coupler ECO

Internal from the control card System System System

µC
8x bus bus bus

DC USYS USYS

DC

UIN UIN
RJ45
U
RJ45 UOUT UOUT

24 V/10 A

UR20-FBC-MOD-TCP-ECO

G.10 3043800000
 u-remote – I/O Systeme IP20

A comprehensive automation portfolio

ModbusTCP ECO UR20-FBC-MOD-TCP-ECO
• 10 A current paths
• Web server via ethernet
• System supply of 16 I/O modules
• Temperature range 0… +50 °C
• Various Modbus services

Technical data
System data
Connection type 2x RJ45 plug-in connectors
Field bus protocol Modbus/TCP MOD-ECO
Process data 1 kByte
Parameter data 1 kByte
Diagnostic data 1 kByte
max. number of modules 16
Transmission rate of field bus, max. 100 Mbit/s
Transmission speed of system bus, max. 48 Mbit/s
Supply
Voltage supply 24 V DC +20 %/ -15 %, via the system bus
Feed current for IIN (input current path) , max. 10 A
Current consumption IIN (power segment of the field bus coupler), typ. 80 mA
General data
Weight 247 g
Dimensions H x W x D 120 mm / 52 mm / 76 mm
Note 24 V DC

G
24 V DC
X1 GND
Ordering data GND
Module variants Type Qty. Order No. X2

Fieldbus coupler, ModbusTCP UR20-FBC-MOD-TCP-ECO 1 2659700000

Note A termination kit (UR20-EBK-ACC) is included in the coupler package.

Accessories
Type Qty. Order No.
Termination kit UR20-EBK-ACC 5 1346610000
Swievel marker UR20-SM-ACC 20 1339920000
Connection marker for pusher custom printing PM 2.7/2.6 MC SDR 192 1323700000
Connection marker for pusher neutral PM 2.7/2.6 MC NE WS 960 1323710000
Module marker for custom printing DEK 5/8-11.5 MC SDR 100 1341610000
Module marker for neutral DEK 5/8-11.5 MC NE WS 500 1341630000
Thermotransfer version (Material: Polyester) THM UR20 GE 1 1429910000
Thermotransfer version (material: polyester) THM UR20 WS 1 1429420000
Paper version for Laserprinter ESO UR20 DIN A4 WS 10 1429430000
Replacement parts
Plug-in connector unit UR20-PK-2659700000-SP 5 2702610000
Note 1 roll = 1000 labels = 1 Qty.
1 sheet = 60 labels = 1 unit

3043800000 G.11
 u-remote – I/O Systeme IP20
A comprehensive automation portfolio

Digital input modules

P- or N-switching, Reverse polarity protection, up to 3-wire+FE

Digital input modules from Weidmüller are available in different versions and
are used primarily to receive binary control signals from sensors, transmitters,
switches or proximity switches. Thanks to their flexible design, they will satisfy
your need for well coordinated project planning with reserve potential.

All modules are available with 4, 8 or 16 inputs and comply fully with IEC 61131-2.
The digital input modules are available as P- or N-switching variant. The digital
inputs are for Type 1 and Type 3 sensors in accordance with the standard. With
a maximum input frequency of up to 1 kHz, they are used in many different
applications. The variant for PLC interface units enables rapid cabling to the
proven Weidmüller interface sub-assemblies using system cables. This ensures
rapid incorporation into your overall system. Two modules with a timestamp
function are able to capture binary signals and to provide a timestamp in 1 μs
resolution. Further solutions are possible with the module UR20-4DI-2W-230V-AC
which works with accurant current up to 230 V as an input signal.

The module electronics supply the connected sensors from the input current path
(UIN).

UR20-4DI-P UR20-4DI-P-3W UR20-8DI-P-2W UR20-8DI-P-3W

UR20-8DI-P-3W-HD UR20-16DI-P UR20-16DI-P-PLC-INT UR20-2DI-P-TS

UR20-4DI-P-TS UR20-4DI-N UR20-8DI-N-3W UR20-16DI-N

UR20-16DI-N-PLC-INT UR20-4DI-2W-230V-AC UR20-8DI-ISO-2W

G.12 3043800000
 u-remote – I/O Systeme IP20

A comprehensive automation portfolio

Analogue input modules
Input parameters can be set for current or voltage,
up to 3-wire+FE, Accuracy 0.1% FSR
The analogue input modules can detect up to 2, 4 or 8 analogue sensors with +/-10 V, +/-5 V,
0...10 V, 0...5 V, 2...10 V, 1...5 V, 0...20 mA or 4...20 mA. Variations are available in 12 and 16 bit
resolution per channel. Sensors in a 2-wire, 3-wire or 3-wire connection + FE can be connected to
each plug-in connector. The measurement range is defined using parametrisation. A status LED
is assigned to each channel. The inputs are protected against voltage surges and overcurrent. The
module electronics supply the connected sensors from the input current path IIN (The "ISO" module
is an exception: the module has no auxiliary voltage outputs. Connected sensors must be supplied
with power from external sources).

"DIAG" module: the module provides individual channel diagnosis with channel-related fault
messages.

"DIF" module: the input channels are differential inputs with a common-mode voltage range of
+/-30 V.

"HART" module: the module can be used as a HART master, with each channel using a dedicated
HART modem. HART devices can be connected to each channel in single connection (point-to-
point, P2P) or multiple connection (multidrop).

UR20-2AI-UI-16 UR20-4AI-UI-12 UR20-4AI-UI-16 UR20-2AI-UI-16-DIAG

UR20-4AI-UI-16-DIAG UR20-4AI-UI-ISO-16-DIAG UR20-4AI-UI-16-HD UR20-4AI-UI-16-DIAG-HD

UR20-8AI-I-16-HD UR20-8AI-I-16-DIAG-HD UR20-8AI-I-PLC-INT UR20-4AI-UI-DIF-16-DIAG

UR20-4AI-UI-DIF-32-DIAG UR20-4AI-I-HART-16-DIAG UR20-4AI-I-HART-ISO-16

3043800000 G.13
 u-remote – I/O Systeme IP20
A comprehensive automation portfolio

Strain gauge module

2-channel module for u-remote load cell analysis

The UR20-2AI-SG-24-DIAG strain gauge module is an analogue input module

designed for the connection of force sensors that use strain gauges. In this
way, weights, torques or vibrations can be precisely recorded. The module
can be calibrated via parametrisation. The web server can be used to calibrate
the module with password protection, and the calibration settings are then
documented.

The tare function can be triggered individually for each channel via a digital
input or via software. Several sensors can be connected in parallel to each of
the two channels in a 4- or 6-wire connection, as long as their input impedance
is within the permissible sensor load. The resolution per channel is 24 bits
with an accuracy of 0.01% of full scale. A status LED is assigned to each
channel. The module electronic supplies the connected sensors from a potential
electrogalvanised from the input current path (IIN). The inputs are protected
against voltage surges and overcurrent.

The u-remote strain gauge module enables the parallel analysis of measurement
data from up to four load cells on a single channel.

UR20-2AI-SG-24-DIAG

G.14 3043800000
 u-remote – I/O Systeme IP20

A comprehensive automation portfolio

3EM-400V-AC-CT1A UR20-3EM-400V-AC-CT1A
• 1-phase power measurement for 1 A converter (with or
without transformer)
• 16 bit resolution
• 32 bit resolution for energy meters
• Power-/ reactiv power measurement
• Energy meter Active / reactive
• Power factor
• Frequency measurement 45 ... 65 Hz
• Analysis of 43 harmonics

Technical data
System data /
/
Interface u-remote system bus /

Transmission speed of system bus, max. 192 Mbit

Galvanic isolation 500 V DC between the current paths
Supply (0&7

Voltage supply 24 V DC +20 %/ -15 %, via the system bus, 24V DC +20 %/-15 % 
1
(according to IEC 61131), 24V DC +30%/-25% (according to DNV GL) /
 
, ,
Current consumption IIN (power segment of the field bus coupler), typ. 8 mA

/

Current consumption IIN (the respective power segment) <35 mA


/

/
Analogue inputs
 
/
/ 
Number 3 voltage inputs / 4 current inputs
. /
3 3

Rated voltage 300 V eff AC (L-N), 520 V eff AC (L-L), according to table I.1 of IEC
,B3 V V
 N O
,B1
61010-1:2010/AMD1:2016/COR1:2019


,B3

,B1 . /
Resolution 16 bit per channel (internal 24 bit), 32 bit for energy counter 
3 3

,B3
Sampling rate of current measurement Sigma Delta ADC with 1.024 MHz (bandwidth of interest from 40 Hz
V V
 N O
,B1

to 3.3 kHz) ,1B3
,1B1



Frequency of the supply system 45…65 Hz

G
Analysis of harmonic up to 43rd
Power rating 0…1 A AC
Insulation reinforced insulation /
Category for voltage measurements CAT III (according to IEC 61010-1), CAT II (according to IEC 61010-1) /
/
for installations with rated voltage to earth > 300 V 1

Measurement method High Resolution Delta Sigma (current measurement in outer conductor)
Measurement accuracy 0.25% in relation to final value (U / I), 0.5% for the calculated values, (0&7

0.75% for harmonics

Connectable converter ratios 1:1 1



/ , , , ,1
Input impedance voltage 1.881 MΩ / 

Input impedance current (differential) 40 mΩ / 

General data

/
 
/
Weight 91 g /  .
3
/
3

Dimensions H x W x D 120 mm / 11.5 mm / 76 mm ,B3  V

N
V
O
. / . /
 3 3 3 3
Note
,B1


,B3 V V V V
 N O N O
,B1 . /
3 3

,B3 
V V

Ordering data
 N O
,B1

,1B3 

Module variants Type Qty. Order No. ,1B1 

Power measurement module, 3 channels UR20-3EM-400V-AC-CT1A 1 2920830000

Note

Accessories
Type Qty. Order No.
Coding elements KOSM BHZ5.00 100 1483050000
Termination kit UR20-EBK-ACC 5 1346610000
Swievel marker UR20-SM-ACC 20 1339920000
Connection marker for pusher custom printing PM 2.7/2.6 MC SDR 192 1323700000
Connection marker for pusher neutral PM 2.7/2.6 MC NE WS 960 1323710000
Module marker for custom printing DEK 5/8-11.5 MC SDR 100 1341610000
Module marker for neutral DEK 5/8-11.5 MC NE WS 500 1341630000
Thermotransfer version (Material: Polyester) THM UR20 GE 1 1429910000
Thermotransfer version (material: polyester) THM UR20 WS 1 1429420000
Paper version for Laserprinter ESO UR20 DIN A4 WS 10 1429430000
Replacement parts
Electronic module UR20-EM-2920830000-SP 1 3052120000
Basic module UR20-BM-SP 5 1350930000
Plug-in connector unit UR20-PK-2920830000-SP 5 3052170000
Note

3043800000 G.15
 u-remote – I/O Systeme IP20
A comprehensive automation portfolio

3EM-400V-AC-CT5A UR20-3EM-400V-AC-CT5A
• 1-phase power measurement for 5 A converter (with or
without transformer)
• 16 bit resolution
• 32 bit resolution for energy meters
• Power-/ reactiv power measurement
• Energy meter Active / reactive
• Power factor
• Frequency measurement 45 ... 65 Hz
• Analysis of 43 harmonics

Technical data
System data /
/
Interface u-remote system bus /

Transmission speed of system bus, max. 192 Mbit

Galvanic isolation 500 V DC between the current paths
Supply (0&7

Voltage supply 24 V DC +20 %/ -15 %, via the system bus, 24V DC +20 %/-15 % 
1
(according to IEC 61131), 24V DC +30%/-25% (according to DNV GL) /
 
, ,
Current consumption IIN (power segment of the field bus coupler), typ. 8 mA

/

Current consumption IIN (the respective power segment) <35 mA


/

/
Analogue inputs
 
/
/ 
Number 3 voltage inputs / 4 current inputs
. /
3 3

Rated voltage 300 V eff AC (L-N), 520 V eff AC (L-L), according to table I.1 of IEC
,B3 V V
 N O
,B1
61010-1:2010/AMD1:2016/COR1:2019


,B3

,B1 . /
Resolution 16 bit per channel (internal 24 bit), 32 bit for energy counter 
3 3

,B3
Sampling rate of current measurement Sigma Delta ADC with 1.024 MHz (bandwidth of interest from 40 Hz
V V
 N O
,B1

to 3.3 kHz) ,1B3
,1B1



Frequency of the supply system 45…65 Hz

G
Analysis of harmonic up to 43rd
Power rating 0…5 A AC
Insulation reinforced insulation /
Category for voltage measurements CAT III (according to IEC 61010-1), CAT II (according to IEC 61010-1) /
/
for installations with rated voltage to earth > 300 V 1

Measurement method High Resolution Delta Sigma (current measurement in outer conductor)
Measurement accuracy 0.25% in relation to final value (U / I), 0.5% for the calculated values, (0&7

0.75% for harmonics

Connectable converter ratios 5:5 1



Input impedance voltage 1.881 MΩ
/ , , , ,1

/
Input impedance current (differential) 5 mΩ / 

General data /



/
Weight 91 g /  .
3
/
3
Dimensions H x W x D 120 mm / 11.5 mm / 76 mm ,B3  V V . / . /
N O

Note
 3 3 3 3
,B1


,B3 V V V V
 N O N O
,B1 . /
3 3

,B3 

Ordering data
V V
 N O
,B1

,1B3 

Module variants Type Qty. Order No. ,1B1 

Power measurement module, 3 channels UR20-3EM-400V-AC-CT5A 1 2920840000

Note

Accessories
Type Qty. Order No.
Coding elements KOSM BHZ5.00 100 1483050000
Termination kit UR20-EBK-ACC 5 1346610000
Swievel marker UR20-SM-ACC 20 1339920000
Connection marker for pusher custom printing PM 2.7/2.6 MC SDR 192 1323700000
Connection marker for pusher neutral PM 2.7/2.6 MC NE WS 960 1323710000
Module marker for custom printing DEK 5/8-11.5 MC SDR 100 1341610000
Module marker for neutral DEK 5/8-11.5 MC NE WS 500 1341630000
Thermotransfer version (Material: Polyester) THM UR20 GE 1 1429910000
Thermotransfer version (material: polyester) THM UR20 WS 1 1429420000
Paper version for Laserprinter ESO UR20 DIN A4 WS 10 1429430000
Replacement parts
Electronic module UR20-EM-2920840000-SP 1 3052130000
Basic module UR20-BM-SP 5 1350930000
Plug-in connector unit UR20-PK-2920840000-SP 5 3052180000
Note

G.16 3043800000
 u-remote – I/O Systeme IP20

A comprehensive automation portfolio

3EM-400V-AC-RC UR20-3EM-400V-AC-RC
• 1-phase power measurement for Rogowski coils
• 16 bit resolution
• 32 bit resolution for energy meters
• Power-/ reactiv power measurement
• Energy meter Active / reactive
• Power factor
• Frequency measurement 45 ... 65 Hz
• Analysis of 43 harmonics

Technical data
System data /
/
Interface u-remote system bus /

Transmission speed of system bus, max. 192 Mbit

Galvanic isolation 500 V DC between the current paths
Supply (050

Voltage supply 24 V DC +20 %/ -15 %, via the system bus, 24V DC +20 %/-15 % 
1
(according to IEC 61131), 24V DC +30%/-25% (according to DNV GL) /
 
, ,
Current consumption IIN (power segment of the field bus coupler), typ. 8 mA

/

Current consumption IIN (the respective power segment) <35 mA


/

/
Analogue inputs
 
/
/ 
Number 3 voltage inputs / 4 current inputs
. /
3 3

Rated voltage 300 Veff AC (L–N), 520 Veff AC (L–L), according to table I.1 of IEC
,B3 V V
 N O
,B1
61010-1:2010/AMD1:2016/COR1:2019


,B3

,B1 . /
Resolution 16 bit per channel (internal 24 bit), 32 bit for energy counter 
3 3

,B3
Sampling rate of current measurement Sigma Delta ADC with 1.024 MHz (bandwidth of interest from 40 Hz
V V
 N O
,B1

to 3.3 kHz) ,1B3
,1B1



Frequency of the supply system 45…65 Hz

G
Analysis of harmonic up to 43rd
Power rating 112.5 mVeff / 1 Aeff (50 Hz), 135 mVeff / 1 Aeff (60 Hz)
Insulation reinforced insulation /
Category for voltage measurements CAT III (according to IEC 61010-1), CAT II (according to IEC 61010-1) /
/
for installations with rated voltage to earth > 300 V 1

Measurement method Converter / Current transformer / Voltage transformer

Measurement accuracy 0.25% in relation to final value (U / I), 0.5% for the calculated values, (050

0.75% for harmonics

Input impedance voltage 1.881 MΩ 1



General data
/ , , , ,1

/
Weight 91 g / 

Dimensions H x W x D 120 mm / 11.5 mm / 76 mm /




/
/  . /
3 3

,B3 V V . / . /
N O

Note
 3 3 3 3
,B1


,B3 V V V V
 N O N O
,B1 . /
3 3

,B3 

Ordering data
V V
 N O
,B1

,1B3 

Module variants Type Qty. Order No. ,1B1 

Power measurement module, 3 channels UR20-3EM-400V-AC-RC 1 2920850000

Note

Accessories
Type Qty. Order No.
Coding elements KOSM BHZ5.00 100 1483050000
Termination kit UR20-EBK-ACC 5 1346610000
Swievel marker UR20-SM-ACC 20 1339920000
Connection marker for pusher custom printing PM 2.7/2.6 MC SDR 192 1323700000
Connection marker for pusher neutral PM 2.7/2.6 MC NE WS 960 1323710000
Module marker for custom printing DEK 5/8-11.5 MC SDR 100 1341610000
Module marker for neutral DEK 5/8-11.5 MC NE WS 500 1341630000
Thermotransfer version (Material: Polyester) THM UR20 GE 1 1429910000
Thermotransfer version (material: polyester) THM UR20 WS 1 1429420000
Paper version for Laserprinter ESO UR20 DIN A4 WS 10 1429430000
Replacement parts
Electronic module UR20-EM-2920850000-SP 3052140000
Basic module UR20-BM-SP 5 1350930000
Plug-in connector unit UR20-PK-2920850000-SP 3052190000
Note

3043800000 G.17
 u-remote – I/O Systeme IP20
A comprehensive automation portfolio

3EM-400V-AC-333MV UR20-3EM-400V-AC-333MV
• 1-phase power measurement for current transformers
with 333 mV output
• 16 bit resolution
• 32 bit resolution for energy meters
• Power-/ reactiv power measurement
• Energy meter Active / reactive
• Power factor
• Frequency measurement 45 ... 65 Hz
• Analysis of 43 harmonics

Technical data
System data /
/
Interface u-remote system bus /

Transmission speed of system bus, max. 192 Mbit

Galvanic isolation 500 V DC between the current paths
Supply (0

Voltage supply 24 V DC +20 %/ -15 %, via the system bus, 24V DC +20 %/-15 % 
1
(according to IEC 61131), 24V DC +30%/-25% (according to DNV GL) /
 
, ,
Current consumption IIN (power segment of the field bus coupler), typ. 8 mA

/

Current consumption IIN (the respective power segment) <35 mA


/

/
Analogue inputs
 
/
/ 
Number 3
. /
3 3

Rated voltage 300 Veff AC (L–N), 520 Veff AC (L–L), according to table I.1 of IEC
,B3 V V
 N O
,B1
61010-1:2010/AMD1:2016/COR1:2019


,B3

,B1 . /
Resolution 16 bit per channel (internal 24 bit), 32 bit for energy counter 
3 3

,B3
Sampling rate of current measurement Sigma Delta ADC with 1.024 MHz (bandwidth of interest from 40 Hz
V V
 N O
,B1

to 3.3 kHz) ,1B3
,1B1



Frequency of the supply system 45…65 Hz

G
Analysis of harmonic up to 43rd
Power rating 333 mVeff / 1 Aeff
Insulation reinforced insulation /
Category for voltage measurements CAT III (according to IEC 61010-1), CAT II (according to IEC 61010-1) /
/
for installations with rated voltage to earth > 300 V 1

Measurement method Converter / Current transformer / Voltage transformer

Measurement accuracy 0.25% in relation to final value (U / I), 0.5% for the calculated values, (0

0.75% for harmonics

Input impedance voltage 1.881 MΩ 1



General data
/ , , , ,1

/
Weight 91 g / 

Dimensions H x W x D 120 mm / 11.5 mm / 76 mm /




/
/  . /
3 3

,B3 V V . / . /
N O

Note
 3 3 3 3
,B1


,B3 V V V V
 N O N O
,B1 . /
3 3

,B3 

Ordering data
V V
 N O
,B1

,1B3 

Module variants Type Qty. Order No. ,1B1 

Power measurement module, 3 channels UR20-3EM-400V-AC-333MV 1 2920860000

Note

Accessories
Type Qty. Order No.
Coding elements KOSM BHZ5.00 100 1483050000
Termination kit UR20-EBK-ACC 5 1346610000
Swievel marker UR20-SM-ACC 20 1339920000
Connection marker for pusher custom printing PM 2.7/2.6 MC SDR 192 1323700000
Connection marker for pusher neutral PM 2.7/2.6 MC NE WS 960 1323710000
Module marker for custom printing DEK 5/8-11.5 MC SDR 100 1341610000
Module marker for neutral DEK 5/8-11.5 MC NE WS 500 1341630000
Thermotransfer version (Material: Polyester) THM UR20 GE 1 1429910000
Thermotransfer version (material: polyester) THM UR20 WS 1 1429420000
Paper version for Laserprinter ESO UR20 DIN A4 WS 10 1429430000
Replacement parts
Electronic module UR20-EM-2920860000-SP 3052200000
Basic module UR20-BM-SP 5 1350930000
Plug-in connector unit UR20-PK-2920860000-SP 3052210000
Note

G.18 3043800000
3043800000
G.19
G

A comprehensive automation portfolio

 u-control – Controls and edge devices
A comprehensive automation portfolio

Combining OT and IT to perfection

Modular controllers for industrial automation and IoT applications

In the context of automation, more and more physical devices are being integrated
into networks. This promotes the trend towards convergence of IT and OT
systems. The new modular control systems u-control M3000 and M4000 point
the way to the future.

M3000 or M4000 – which controller is right for you?

With u-control M3000, automation solutions can be perfectly integrated into
the IoT integration. The powerful controller also serves as an edge device
for information in the network and can be expanded by connecting function
modules – ideal for automation and Industrial IoT applications. u-control M4000
also offers two additional CPU cores, four Ethernet interfaces and more RAM, NV-
RAM and flash memory for complex edge computing in automation.

G Approvals:

Planned approvals:

G.20 3043800000
 u-control – Controls and edge devices

A comprehensive automation portfolio

PLC and edge device in
one device MultiCore technology

u-OS G
inside

2 Ethernet interfaces
4 Ethernet interfaces

Optional extension with

additional interfaces (field
buses, Wifi, GSM)
Simple option for connecting
additional function modules

3043800000 G.21
 u-control – Controls and edge devices
A comprehensive automation portfolio

UC20-M3000 UC20-M3000
• Controller for automation and IoT applications
• u-OS integrated
• System supply for 64 u-remote I/O modules
• Additional interface for function modules that can be
bayed on the left
• Dual-core CPU, 1.2 GHz
• 2 x 10 A current path

Technical data
System data
Connection type PUSH IN
max. number of modules 64 0
Configuration interface USB-C (3.1), MicroSD CARD
Processor Dual Core ARM Cortex A53, 1200 MHz 6HUYLFH
Memory (Flash) 16 GB ;
Real-time clock Battery buffered —6'
Engineering tool u-OS
Supply
Supply voltage for inputs 24 V DC +20 %/ -15 %
Supply voltage for outputs 24 V DC +20 %/ -15 %
Feed current for IIN (input current path) , max. 10 A
Feed current for IOUT (output current path) , max. 10 A 9 '&,1
Current consumption IIN (power segment of the field bus coupler), typ. 116 mA ; ; 9 '&,1
General data *1',1
Weight 588 g *1',1
Dimensions H x W x D 120 mm / 80 mm / 101 mm 9 '&287

G
Note 9 '&287
*1'287
; ; *1'287
Ordering data
Module variants Type Qty. Order No.
UC20-M3000 1 2839150000
Note A termination kit (UC20-EBK-ACC) is included in the controller package.

Accessories
Type Qty. Order No.
Swievel marker UR20-SM-ACC 20 1339920000
Connection marker for pusher custom printing PM 2.7/2.6 MC SDR 192 1323700000
Connection marker for pusher neutral PM 2.7/2.6 MC NE WS 960 1323710000
Module marker for custom printing DEK 5/8-11.5 MC SDR 100 1341610000
Module marker for neutral DEK 5/8-11.5 MC NE WS 500 1341630000
Thermotransfer version (Material: Polyester) THM UR20 GE 1 1429910000
Thermotransfer version (material: polyester) THM UR20 WS 1 1429420000
Paper version for Laserprinter ESO UR20 DIN A4 WS 10 1429430000
USB cable (USB A to Micro USB) IE-USB-A-MICRO-1.8M 1 1487980000
Replacement parts
Plug-in connector unit UR20-PK-2839150000-SP 5 2884000000
Control accessories
SD Memory Card SD-CARD 1 2684400000
Note u-link licences: See catalogue 9 - Industrial Ethernet in chapter E, PROCON-WEB
licences: See chapter G

G.22 3043800000
 u-control – Controls and edge devices

A comprehensive automation portfolio

UC20-M3000 UC20-M4000
• Controller for automation and IoT applications
• u-OS integrated
• System supply for 64 u-remote I/O modules
• Additional interface for function modules that can be
bayed on the left
• Quad-Core CPU, 1.2 GHz
• 2 x 10 A current path

Technical data
System data
Connection type PUSH IN
max. number of modules 64 0
Configuration interface USB-C (3.1), MicroSD CARD
Processor Quad Core ARM Cortex A53, 1200 MHz 6HUYLFH
Memory (Flash) 16 GB ;
Real-time clock Battery buffered —6'
Engineering tool u-OS
Supply
Supply voltage for inputs 24 V DC +20 %/ -15 %
Supply voltage for outputs 24 V DC +20 %/ -15 %
Feed current for IIN (input current path) , max. 10 A
Feed current for IOUT (output current path) , max. 10 A 9 '&,1
; ;
Current consumption IIN (power segment of the field bus coupler), typ. 116 mA 9 '&,1
General data *1',1
Weight 604 g *1',1
; ;
Dimensions H x W x D 120 mm / 80 mm / 101 mm 9 '&287

G
Note 9 '&287
*1'287
; ; *1'287
Ordering data
Module variants Type Qty. Order No.
UC20-M4000 1 2839160000
Note A termination kit (UC20-EBK-ACC) is included in the controller package.

Accessories
Type Qty. Order No.
Swievel marker UR20-SM-ACC 20 1339920000
Connection marker for pusher custom printing PM 2.7/2.6 MC SDR 192 1323700000
Connection marker for pusher neutral PM 2.7/2.6 MC NE WS 960 1323710000
Module marker for custom printing DEK 5/8-11.5 MC SDR 100 1341610000
Module marker for neutral DEK 5/8-11.5 MC NE WS 500 1341630000
Thermotransfer version (Material: Polyester) THM UR20 GE 1 1429910000
Thermotransfer version (material: polyester) THM UR20 WS 1 1429420000
Paper version for Laserprinter ESO UR20 DIN A4 WS 10 1429430000
USB cable (USB A to Micro USB) IE-USB-A-MICRO-1.8M 1 1487980000
Replacement parts
Plug-in connector unit UR20-PK-2839160000-SP 5 2883990000
Control accessories
SD Memory Card SD-CARD 1 2684400000
Note u-link licences: See catalogue 9 - Industrial Ethernet in chapter E, PROCON-WEB
licences: See chapter G

3043800000 G.23
 u-control – Controls and edge devices
A comprehensive automation portfolio

Flexible automation of applications

u-control WL2000 for compact and cost-optimised control

The u-control WL2000 controller is based on the compact design of the

u-remote fieldbus coupler – for even greater space saving and maximum
flexibility when it comes to the implementation of individual automation
solutions. It is compatible with the u-remote range and allows for direct
connection of I/O modules. Combined with our open u-OS operating system, it
can be utilised for its entire range of applications, and offers an excellent level of
customisation. For further information on u-OS, read chapter E.

The u-control WL2000 is equipped with an Ethernet-based fieldbus and one

or optionally two TCP/IP interfaces. The controller also has an optional CAN
interface. In addition, communication via the Modbus TCP protocol or OPC-UA is
also possible over our u-OS operating system and Codesys. u-control WL2000
also has a Dual-Core ARM A9 processor and a USB service interface. In addition
to the battery-buffered real-time clock, there is also a plug-in station for a
microSD card with up to 32 GB of storage space for your projects.

G.24 3043800000
 u-control – Controls and edge devices

A comprehensive automation portfolio

Battery-buffered real-time clock
Battery-buffered real-time clock and
slot for MicroSD cards up to 32 GB.
Versatile connection options
Fitted with a fieldbus and TCP/
IP interface, plus an optional CAN
interface.

Separate power supply

Galvanic isolation of the
physical input and output
power supply.

u-OS
inside

Simple data exchange

The micro USB interface enables easy data
exchange and service of the control.

Input & output current

3 separate current paths for system
bus, as well as input current and
output current path.

3043800000 G.25
 u-control – Controls and edge devices
A comprehensive automation portfolio

UC20-WL2000-AC UC20-WL2000-AC
• Controller for automation and IoT applications
• Engineering tool u-create web
• System supply of 64 I/O modules
• Dual-Core CPU, 624 MHz
• 2 x 5 A current path

Technical data
System data
Connection type 2 x RJ45 plug-in connectors
max. number of modules 64 AC
X1
Configuration interface Micro USB 2.0 TD+ 1
Processor Dual Core ARM Cortex A9, 624 MHz, 512 Mbyte RAM TD– 2
Memory (Flash) 8 GB, 32 GB via microSD RD+ 3
Real-time clock Battery buffered RD– 6
Engineering tool u-create web, u-OS
Supply
Supply voltage for inputs 24 V DC +20 %/ -15 % X2
Supply voltage for outputs 24 V DC +20 %/ -15 % TD+ 1
Feed current for IIN (input current path) , max. 5A TD– 2
Feed current for IOUT (output current path) , max. 5A RD+ 3
24V DC IN
RD– 6
Current consumption IIN (power segment of the field bus coupler), typ. 116 mA 24V DC IN
General data GND IN
Weight 232 g GND IN
Dimensions H x W x D 120 mm / 52 mm / 76 mm
24V DC OUT

G
Note 24 V DC OUT
GND OUT
GND OUT
Ordering data
Module variants Type Qty. Order No.
Automation controller (Web engineering) UC20-WL2000-AC 1 1334950000
Note A termination kit (UC20-EBK-ACC) is included in the controller package.

Accessories
Type Qty. Order No.
Swievel marker UR20-SM-ACC 20 1339920000
Connection marker for pusher custom printing PM 2.7/2.6 MC SDR 192 1323700000
Connection marker for pusher neutral PM 2.7/2.6 MC NE WS 960 1323710000
Module marker for custom printing DEK 5/8-11.5 MC SDR 100 1341610000
Module marker for neutral DEK 5/8-11.5 MC NE WS 500 1341630000
Thermotransfer version (Material: Polyester) THM UR20 GE 1 1429910000
Thermotransfer version (material: polyester) THM UR20 WS 1 1429420000
Paper version for Laserprinter ESO UR20 DIN A4 WS 10 1429430000
USB cable (USB A to Micro USB) IE-USB-A-MICRO-1.8M 1 1487980000
Replacement parts
Plug-in connector unit UR20-PK-1334950000-SP 5 2605360000
Control accessories
SD Memory Card SD-CARD 1 2684400000
Battery for real-time clock BATTERY-CR1220-3V 1 2684410000
Note u-link licences: See catalogue 9 - Industrial Ethernet in chapter E, PROCON-WEB
licences: See chapter G

G.26 3043800000
 u-control – Controls and edge devices

A comprehensive automation portfolio

UC20-WL2000-AC-CAN UC20-WL2000-AC-CAN
• Controller for automation and IoT applications
• Engineering tool u-create web
• System supply of 64 I/O modules
• Dual-Core CPU, 624 MHz
• 2 x 5 A current path
• CAN Interface

Technical data
System data
Connection type 2 x RJ45 plug-in connectors
max. number of modules 64 :/$&&$1
;
Configuration interface Micro USB 2.0
7' 
Processor Dual Core ARM Cortex A9, 624 MHz, 512 Mbyte RAM 7'² 
Memory (Flash) 8 GB, 32 GB via microSD 5' 
Real-time clock Battery buffered 5'² 
Engineering tool u-create web, u-OS
Supply
Supply voltage for inputs 24 V DC +20 %/ -15 % ;
Supply voltage for outputs 24 V DC +20 %/ -15 % 7' 
Feed current for IIN (input current path) , max. 5A 7'² 
Feed current for IOUT (output current path) , max. 5A 5' 
9'&,1
5'² 
Current consumption IIN (power segment of the field bus coupler), typ. 116 mA 9'&,1
General data *1',1
Weight 232 g *1',1
Dimensions H x W x D 120 mm / 52 mm / 76 mm

&$1+
&$1/
9'&287

*1'
;

G
Note 9'&287
*1'287
*1'287
Ordering data

&$1+
&$1/
*1'
Module variants Type Qty. Order No.
Automation controller (Web engineering) UC20-WL2000-AC-CAN 1 2928020000
Note A termination kit (UC20-EBK-ACC) is included in the controller package.

Accessories
Type Qty. Order No.
Swievel marker UR20-SM-ACC 20 1339920000
Connection marker for pusher custom printing PM 2.7/2.6 MC SDR 192 1323700000
Connection marker for pusher neutral PM 2.7/2.6 MC NE WS 960 1323710000
Module marker for custom printing DEK 5/8-11.5 MC SDR 100 1341610000
Module marker for neutral DEK 5/8-11.5 MC NE WS 500 1341630000
Thermotransfer version (Material: Polyester) THM UR20 GE 1 1429910000
Thermotransfer version (material: polyester) THM UR20 WS 1 1429420000
Paper version for Laserprinter ESO UR20 DIN A4 WS 10 1429430000
USB cable (USB A to Micro USB) IE-USB-A-MICRO-1.8M 1 1487980000
Replacement parts
Plug-in connector unit UR20-PK-2928020000-SP 5 2742900000
Control accessories
SD Memory Card SD-CARD 1 2684400000
Battery for real-time clock BATTERY-CR1220-3V 1 2684410000
Note u-link licences: See catalogue 9 - Industrial Ethernet in chapter E, PROCON-WEB
licences: See chapter G

3043800000 G.27
 IoT-Gateways
A comprehensive automation portfolio

Integration of existing components into IoT networks

Complete application representation for the IoT gateway

The intelligent networking of machines and devices in the IoT opens up many
possibilities and offers opportunities for new business models. IoT gateways Also
enable the exchange of data between field devices and servers or cloud availa
applications. The transmitted data can be used to deepen process knowledge, ble in
carry out optimisations or offer new services. IP54
With our IoT gateway, you can collect machine data and gain access to your
field devices and controls. Various protocols and interfaces are available for
this purpose. The Weidmüller u-OS operating system is pre-installed on the IoT
gateway. This means customers can choose to install a wide range of apps for
data pre-processing. One option is Node-RED as a graphic development tool for
IoT applications, which makes available a large community and an extensive
selection of system interfaces, as well as pre-processing functions free of charge.
Nodes are available to easyConnect, AWS or Google cloud to ensure a simple,
configurable connection to these systems. A connection to Siemens Industrial
Edge via the convenient App Manager within u-OS is also possible as another
example. Last but not least, of course, integration into the u-link remote access
service is available, for remote maintenance of systems from any location. For

G
location-independent remote system maintenance, you can also integrate the
gateway into the u-link remote access service.

Your special advantage:

• Full flexibility via u-OS for your own and third party applications
Simple installation of (software) containers and other apps through the App
Manager
• Secure and cost-optimised use of cloud systems through pre-processing
and storage
• Can also be used as a controller through Linux with PREEMPT-RT

G.28 3043800000
 IoT-Gateways

A comprehensive automation portfolio

Monitoring and analysis of the system
status, e.g. with regard to the total energy
consumption with a single web-based
application

Transfer of system data to

public cloud platforms

G
Use of a multifunctional
measuring instrument with
extensive interfaces

Collect data from a

variety of field sensors
and devices
Electricity Gas Temperature Water Production data Control

More products in our

online catalogue:
eshop.weidmueller.com

3043800000 G.29
 IoT-Gateways
A comprehensive automation portfolio

IoT-Gateways
• Enables machine data acquisition and provides access to field devices and PLC's via
various protocols and interfaces
• Interfaces to your own IT systems as well as to common cloud systems
• Data traffic reduction through preprocessing on edge via the open IoT standard Node-
RED
• Secure and easy remote maintenance with Weidmüller u-link remote access Service
• Integration of most common communication interfaces in small design
• D1Open programming platform Node-RED with strong community support

Technical data
Interfaces Approvals
Digital outputs 1x, 19.2 - 28 V high; max. 1 A EMC standards EN 61000-6-3, EN 61000-6-2
Digital inputs 2x, >10 V high , <3.6 V low; max. 30 V DC Shock according to IEC 60068-2-27
Ethernet ports 2 Vibration according to IEC 60068-2-6
RJ45 ports 10/100BaseT(X), auto negotiation, Full-/half-duplex mode, Auto ROHS marking J
MDI/MDI-X port
Serial port 1x RS232/RS485 Ordering data
USB port 1x USB 2.0 (Type A; max. 500 mA)
Type Qty. Order No.
System data
IOT-GW30 1 2682620000
Real-time clock Capacity buffered (max. 5 days)
Processor Dual Core ARM Cortex A9, 600 MHz
Memory (Flash) 4 GB
Memory (RAM) 1 GB, DDR3
VPN functionality
u-link OpenVPN-based remote access service via the Weidmüller
u-link cloud

G
Technical data
Housing main material Metal
Speed Fast Ethernet
Protection degree IP20
Type of mounting DIN rail
Dimensions H x W x D 125 / 35 / 105 mm
Net weight 412 g
Environmental conditions
Operating temperature -20 °C...60 °C
Humidity 5 to 95 % (non-condensing)
Power supply
Voltage supply 24 V DC
Voltage supply range 19.2...28VDC
Current consumption 0.24A @ 24V
Reverse polarity protection Yes
Note Mobile phone antennas and connection cables can be found in Chapter I.

G.30 3043800000
 IoT-Gateways

A comprehensive automation portfolio

IoT-Gateways
• Enables machine data acquisition and provides access to field devices and PLC's via
various protocols and interfaces
• Interfaces to your own IT systems as well as to common cloud systems
• Data traffic reduction through preprocessing on edge via the open IoT standard Node-
RED
• Secure and easy remote maintenance with Weidmüller u-link remote access Service
• Integration of most common communication interfaces in small design
• D1Open programming platform Node-RED with strong community support

Technical data
Interfaces Mobile radio interface
Connector for external antennas 2x SMA female Frequency band LTE: 2100MHz (B1), 1800MHz (B3), 850MHz (B5), 2600MHz
Number of SIM-Card slots 1 (B7), 900MHz (B8), 800MHz (B20), 2600MHz (B38),
Digital outputs 1x, 19.2 - 28 V high; max. 1 A 2300MHz (B40), 2600MHz (B41), UMTS/WCDMA: 2100MHz
Digital inputs 2x, >10 V high , <3.6 V low; max. 30 V DC (B1), 850MHz (B5), 900MHz (B8), GSM/GPRS/EDGE: 900MHz
Ethernet ports 2 (B8), 1800MHz (B3)
RJ45 ports 10/100BaseT(X), auto negotiation, Full-/half-duplex mode, Auto Wireless module LTE / HSPA+ multiband wireless module (4G / 3G / 2G) for fast
MDI/MDI-X port wireless Internet access
Serial port 1x RS232/RS485 LTE category CAT 4
SIM-Card slot type Micro-SIM Download rate, max. 150
USB port 1x USB 2.0 (Type A; max. 500 mA) Upload rate, max. 50
System data Approvals
Real-time clock Capacity buffered (max. 5 days) EMC standards EN 61000-6-3, EN 61000-6-2
Processor Dual Core ARM Cortex A9, 600 MHz Shock according to IEC 60068-2-27
Memory (Flash) 4 GB Vibration according to IEC 60068-2-6
Memory (RAM) 1 GB, DDR3 ROHS marking J

G
VPN functionality
u-link OpenVPN-based remote access service via the Weidmüller Ordering data
u-link cloud Type Qty. Order No.
Technical data IOT-GW30-4G-EU 1 2682630000
Housing main material Metal IOT-GW30-4G-NA 1 2682640000
Speed Fast Ethernet
Protection degree IP20
Type of mounting DIN rail
Dimensions H x W x D 125 / 35 / 105 mm
Net weight 500 g
Environmental conditions
Operating temperature -20 °C...60 °C
Humidity 5 to 95 % (non-condensing)
Power supply
Voltage supply 24 V DC
Voltage supply range 19.2...28VDC
Current consumption 0.24A @ 24V
Reverse polarity protection Yes
Note Mobile phone antennas and connection cables can be found in Chapter I.

3043800000 G.31
 u-view – Touch Panels
A comprehensive automation portfolio

Optimum visualisation and operation

u-view touch panels: brilliant pictures meet elegant, flat design

Comfortable touch panels simplify the monitoring and control of machines and
systems. Web-based u-view HMIs from Weidmüller offer excellent image quality
and can be used in an industrial environment without any restrictions.

The u-view series comprises zwei product lines:

• Eco Line (resistive web panels) in 4.3“, 7“ and 10.1“
• Advanced Line (capacitive web panels) in 7“, 10.1“, 15.6“ und 21.5“

All panels feature a particularly flat design, a robust aluminium housing and
IP66 protection on the front. In addition, they also offer convenient configuration
options for accessing different web servers via modern browsers. This makes
them ideally suitable for future-oriented web applications, especially for web-
based visualisation solutions with PROCON-WEB.

G.32 3043800000
 u-view – Touch Panels

A comprehensive automation portfolio

Attractive design
All u-view touch panels come with
Comfortable configuration particularly flat and space-saving
u-view touch panels are quick and housings.
easy to configure and can therefore
be set up intuitively.

Optim
i
PROC zed for
O
and ot N-WEB
her w
techn eb
ologie
s

G
High compatibility
u-view touch panels can be used in a wide
variety of applications thanks to their modern Great performance
web technology based on HTML5. First-class image quality and powerful
processors make working with u-view
touch panels particularly enjoyable.

Intuiti
v
touch e
u-view Eco or Advanced – Which
techn -
product line best meets your needs?
ology
Compared to the Eco Line, the
Advanced Line offers significantly
better connectivity with two
independently usable Ethernet interfaces
(10/100/1000 Mbit/s), two USB type A
interfaces to connect external devices
(like a mouse, keyboard or storage
media), a high-precision capacitive multi-
touch with gesture control and higher
performance when displaying complex
web content.

3043800000 G.33
 G
A comprehensive automation portfolio

G.34
3043800000
 Contents

Energy management software

Energy management software

Energy management software Introduction H.2

ecoExplorer go – configuration software H.4

ResMa® Resource and energy management H.6

ResMa® – Basic and ResMa® Package extensions H.8

ResMa® Evaluation Kit H.10

PROCON-Connect H.12

3043800000 H.1
 Introduction
Energy management software

Data processing for Energy Management and energy analytics

Weidmüller Energy Suite

Data processing is becoming increasingly important in an industrial context.

We are your partner for all matters relating to software application matters,
and will provide you with suitable software solutions as necessary. With
our comprehensive expertise, we ensure a smooth interplay in digitalised
industry – from the recording of data at the field level and distribution
using our industrial ethernet components through to comprehensive data
processing in the fields of industrial analytics and Energy Management.

H.2 3043800000
 Introduction

Energy management software

Industrial software solutions need to have a large number of Data storage
specific properties in order to provide the greatest possible Our software solutions allow you to reliably store data within
benefit. We will advise you on the selection and application your own network without needing to rely on cloud-based
of your software with our broad expertise. The focus for us is services.
on the following factors:
Scalability
Availability The scalability of our software solutions makes it possible to
Our high standards of quality guarantee error-free data adapt the growing demands of your company at any time.
processing, a high level of availability and long-term benefit.
User-friendliness
Security Well thought-out and practical operation in the field
With all of our projects for customers we tackle the plays a particularly important role for us. We focus on
growing danger of attacks from hackers with a particularly operating concepts that are tailored precisely to the
thought-out approach. In this way we ensure the greatest location of use, and promote efficiency and productivity.
possible security before, during and after implementation.

3043800000 H.3
 ecoExplorer go – configuration software
Energy management software

Conveniently record and clearly display measurement data

ecoExplorer go simplifies parameterisation and visualisation
Quick commissioning
The user-friendly interface of ecoExplorer go
allows quick connection and configuration of
the measurement devices.

With the ecoExplorer go, you can easily create a

commissioning report that can be used to carry
out a connection check, thereby verifying the
correct functioning of the devices.

Quick insight
For an efficient energy management, the
further processing and evaluation of energy and
measurement data for the power quality is of
key importance. ecoExplorer go enables initial
analysis of the energy grid.

Power quality report

With the ecoExplorer go and our EA750, you
can monitor the voltage quality of the whole
system, and with the report generator you can
generate network quality reports according to
PQ standards like EN 50160 or EN61000-2-4.

Hardware- • CPU: x86_64 Dualcore, >= 2,0 GHz, >= 8 MB cache

Requirements • Min. 8 GB Memory
• Min. 16 GB free hard drive space (demand dependends on data retention)

Data storage • Live visualisation of measurement data

• Reading the device memory (if available)
• Creation of CSV files

Fielddevice- • Local backup of the field device configuration

Configuration • Graphical configuration of Energy Meters / Energy Analysers
• Management of the field device memory (when available)

We reserve the right to make technical changes.

H.4 3043800000
 ecoExplorer go – configuration software

Energy management software

The visualisation of energy consumers is a central principle
to make production sites more efficient.

Many of our energy measurement devices have a very simple user interface for
reasons of clarity to allow the display and parameterisation of the measured
data directly on the device. ecoExplorer go is a PC-based software which
allows you to access your devices quicker and more simply and conveniently
than before. Thanks to the intuitive user interface, users can configure the
measurement devices quickly and easily and display the measured data clearly.

ecoExplorer go has been tailored to the use of measurement equipment in the

energy sector. This guarantees that it provides optimum performance in practice.

You can find the download

for the software ecoEcplorer go here:
www.weidmueller.com/ecoexplorergo

3043800000 H.5
 ResMa® Resource and energy management
Energy management software

ResMa® Software for process and energy optimization

Optimize your processes with the intelligent energy
management that can be combined to Industrial IoT
The use of energy and resources is a cost factor that grows with increasing automation
and is having an increasing impact on industrial production. By linking resource and
energy management with Industrial IoT, we create the transparency needed to make
your processes more sustainable and economical.

The resource and energy management software ResMa® combines the analysis of
energy and process data with Industrial IoT platform solutions and offers an integrated
system to merge and analyse comprehensive data centrally and to use the knowledge
for the optimisation of processes or for new services.

The modular and preconfigured system variants for the standard ResMa® use cases
enable the flexible and fast implmentation of your projects, whether in production,
industry or distributed infrastructures. In addition, open interfaces allow simple and
cost-effective integration into the existing IT environment. We enable you to make
optimal use of your data, uncovering potential and increasing your productivity.

Your benefits at a glance

H
Recording of production data Reduction of costs
The simple collection of data With our solutions, energy and
from different machines and process data become meaningful
systems enables the collection of key figures. In this way, you not
production data. Thus, complex only reduce costs, but also optimize
key figures can be calculated and your processes, increase availability
plausibility can be configured to and reduce the use of resources.
optimize production processes.

Automatic reporting Real-time alerting

For standardized reporting, individual States, limit or set values are
energy reports or production- continuously monitored and
relevant evaluations can be sent show abnormalities in order to
automatically. In addition, the avoid downtimes and increase
interactive documentation within OEE. This information can be
the system supports the exchange conveniently forwarded to users.
of information between users.

Simple system integration Certified acc. to ISO 50001

Flexible integration of different measu- DIN EN ISO 50001 compliant energy
rement systems, industrial controllers management certified by the TÜV-Süd
or other data sources through com- (German Technical Inspectorate) and
munication drivers (like Modbus or listed at the BAFA. ResMa® allows
OPC-UA) and open interfaces. Data ex- for simple documentation of energy
change with ERP/MES systems or other saving measures with subsequent
databases is also easy to implement. monitoring and final analysis.

H.6 3043800000
 ResMa® Resource and energy management

Energy management software

ResMa® offers comprehensive analysis options to identify energy and process-based
potentials, document them and derive measures for optimization. Power and production data
are collected and prepared in ResMa®. Display options like Sankey diagrams, comprehensive
reports or options to compare time periods provide maximum transparency.

Transparency of production
Simple acquisition of all measured variables

• Electricity, gas, water, heat, air consumption

• Order-related quantities and material input
• Machine and equipment performance

ResMa® delivers comprehensive values for

statistical analysis of all recorded measured
variables, such as: Min, Max, Mean, Sum etc.

Simple and efficient process analysis

Detailed analysis via interactive,
adaptable charts for optimal display

• Generation of meaningful key figures including

production parameters
• Specific analyses for energy usage and other
production parameters

Less effort, more control

Automated evaluation

• Representation of energy flows via Sankey diagrams

• Use of mobile devices for fast notifications and
status queries
• Central monitoring of all production halls or branches
for cross-site benchmarking

3043800000 H.7
 ResMa® – Basic and ResMa® Package extensions
Energy management software

ResMa® Basic
Evaluate data – plan optimizations
Basic package for the preparation, presentation and
analysis of data from the production environment

• Identification of weak points and causes with fluctuating

process quality
• Documentation of the entire consumption
• Efficient reporting through automated reports
• Simple operability with high functionality at the same time
• Adjustable dashboards for maximum transparency

Optionally extend your ResMa® Basic

Add-on Packages

H
Optionally expand your ResMa® Basic. The modular structure allows
you to use special and extensive evaluations and analyses. Find the
ideal addition to optimise your use case with the ResMa® energy
management software and easily gain added value from your data.

ResMa® Energy Package ResMa® Production Package

DIN EN ISO 50001 certified energy management system For a detailed analysis of machines and systems

• Continuous monitoring and optimisation of energy usage • Increase process stability to reduce scrap
• PDCA cycles and documentation functions and increase quality
• Calculate meaningful energy KPIs and key data • Reduce use of resources (material and power)
• Automated reporting with custom reporting templates to save costs
• Transparent cost calculation with tariff integration • Statistics on the causes of downtime as the basis
for a cost analysis
• Increase availability and productivity to maximize profits
• Optimize productivity through cross-location
benchmarking on the product level and on an order-
specific basis

H.8 3043800000
 ResMa® – Basic and ResMa® Package extensions

Energy management software

ResMa® Regression Analysis Package ResMa® Recipe Management Package
Regression analyses for optimisation Documentation, representation and analysis
and investment decisions of recipes to improve quality

• Find dependencies in data via correlation analyses and • Standardisation through the use and exchange of recipes
thereby boost process understanding and transparency • Document concrete production processes
• Determine the type and strength of dependencies as • Analyse warning and limit value violations
the basis for optimization and investment decisions • Visualise unstable processes early on
• Create regression models based on dependency findings (connection to LiveValueCache)
• Complete regression analyses based on • Integrate findings into newly developed recipe versions
created models for any time period • Increase production quality for the long-term
• Visualise the effects of optimisation
measures on energy and processes

ResMa® Import Package

Facilitates imports from third-party systems
to evaluate all data in a single system

• Browse through external data sources (MS SQL, CSV)

• Map time series data on measurement points
• Configure import jobs
• Automatic cyclical execution
• Automate adoption of time series data
from third-party systems

3043800000 H.9
 ResMa® Evaluation Kit
Energy management software

ResMa® Evaluation Kit

Test package with comprehensive functions
To get to know the versatile functions of ResMa®, our ResMa® Evaluation Kit
provides a cost-effective introduction to recording and evaluating measured
values. We would like to make it possible for everyone to use our ResMa®
energy management software in the form of a test package in order to make
energy management in companies of any size as efficient as possible.

Further information is available on our website:

http://wmqr.eu/ResMa-Evaluation-Kit

Your advantages

H
Short delivery times More efficiency through transparency Individual introduction
Hardware and software test package Continuous monitoring, analysis and You will receive an introduction to your
available at short notice evaluation of your energy data individual project from our experts

H.10 3043800000
 Order overview

Energy management software

ResMa® Basic & Add-on Packages
Order overview
The available functions of ResMa® are divided into different function
packages, allowing you to customise configuration to suit your needs.
We will be happy to advise you with the selection and demonstrate
the corresponding scope of services of the extension packages.

Type Number of process variables, max. Platform for runtime system Order No.
RESMA
RESMA-100 100 Windows 3036610000
RESMA-200 200 Windows 3036620000
RESMA-500 500 Windows 3036630000
RESMA-1000 1.000 Windows 3036640000
RESMA-3000 3.000 Windows 3036650000
RESMA-10000 10.000 Windows 3036660000
RESMA-100-ENMS 100 Windows 3036750000
RESMA-200-ENMS 200 Windows 3036760000
RESMA-500-ENMS 500 Windows 3036770000
RESMA-1000-ENMS 1.000 Windows 3036780000
RESMA-3000-ENMS 3.000 Windows 3036790000
RESMA-10000-ENMS 10.000 Windows 3036800000
RESMA-100-PROD 100 Windows 3036670000
RESMA-200-PROD 200 Windows 3036690000
RESMA-500-PROD 500 Windows 3036700000
RESMA-1000-PROD 1000 Windows 3118160000
RESMA-3000-PROD 3.000 Windows 3036720000
RESMA-10000-PROD 10.000 Windows 3036710000

H
RESMA-100-IMPORT 100 Windows 3029480000
RESMA-200-IMPORT 200 Windows 3029490000
RESMA-500-IMPORT 500 Windows 3029500000
RESMA-1000-IMPORT 1.000 Windows 3029510000
RESMA-3000-IMPORT 3.000 Windows 3029520000
RESMA-10000-IMPORT 10.000 Windows 3029530000
RESMA-100-REZEPTUR 100 Windows 3029540000
RESMA-200--REZEPTUR 200 Windows 3029550000
RESMA--500-REZEPTUR 500 Windows 3029560000
RESMA-1000--REZEPTUR 1000 Windows 3029570000
RESMA-3000--REZEPTUR 3000 Windows 3029580000
RESMA-10000--REZEPTUR 10000 Windows 3118170000
RESMA-100-REGRESSION 100 Windows 3118180000
RESMA-200-REGRESSION 200 Windows 3029610000
RESMA-500-REGRESSION 500 Windows 3029620000
RESMA-1000-REGRESSION 1000 Windows 3029630000
RESMA-3000-REGRESSION 3000 Windows 3029640000
RESMA-10000-REGRESSION 10000 Windows 3029650000

RESMA-MODBUS-CONNECTOR Windows 2854870000

RESMA-PLC-CONNECTOR Windows 2854120000

Basic Training 2938790000

Inbetriebnahme [Stunde] 2938840000
Installation Standard 2938810000
Project Coordination 2938820000
SLA Technical Support (PWEB/ResMa) 2938730000
SLA Update (ResMa) 3107540000

3043800000 H.11
 Overview – PROCON-Connect
Energy management software

PROCON-Connect –
Simple data acquisition, pre-processing and communication

Our PROCON-Connect enables the acquisition of

machine data from different control systems and their
further utilisation in the Weidmüller solutions ResMa
and easyConnect, among others. It also allows local pre-
processing and the use of machine data in other software
systems through connectors and APIs, among other things.

The PROCON-Connect can be used for a wide range of

data- and service-oriented Industrial IoT use cases. The
connections to controllers, databases and the interfaces
to other software solutions are conveniently configured in
the browser. In addition to a comprehensive driver portfolio
for connecting controllers, the PROCON-Connect uses
industry-appropriate standards (such as InfluxDB or MQTT),​

H
• Drivers with browsing function: ­OPC-UA,
ModbusTCP/RTU, CODESYS®, AllenBradley
and drivers for u-mation PLC​
• Installation of u-OS App Manager or on
industrial PCs via Docker container
• Parameterisation of controller connections,
databases and cloud connections via
browser

Platform-independent app Open standards and interfaces Intuitive web engineering

Simple installation under u-OS using Communication drivers, database Our PROCON-Connect can be
the App Manager and on any hard- technologies, APIs and cloud interfaces configured completely in the
ware using Docker containers. of the PROCON-Connect are based browser at run-time. It supports
on open standards (e.g. OPC-UA, engineering with project import
InfluxDB or MQTT) and, in addition and export functionality as well as
to our APIs, allow seamless integ- extensive feedback for the user.
ration into the IIoT infrastructure.

H.12 3043800000
 Overview – PROCON-Connect

Energy management software

Ordering data
Type Number of process variables, max. Number of devices Platform for runtime system Order No.
P-CON RUN Windows, Linux, Docker Container 3053900000
P-CON DRV CODESYS Windows, Linux, Docker Container 3053910000
P-CON DRV ALLENBRADLEY Windows, Linux, Docker Container 3053920000
P-CON COM 50 50 Windows, Linux, Docker Container 3053930000
P-CON COM 100 100 Windows, Linux, Docker Container 3053940000
P-CON COM 250 250 Windows, Linux, Docker Container 3053950000
P-CON COM 500 500 Windows, Linux, Docker Container 3053960000
P-CON COM 1000 1000 Windows, Linux, Docker Container 3053970000
P-CON COM 2500 2500 Windows, Linux, Docker Container 3053980000
P-CON COM 5000 5000 Windows, Linux, Docker Container 3053990000
P-CON COM 10000 10000 Windows, Linux, Docker Container 3054000000

3043800000 H.13
 H
Energy management software

H.14
3043800000
 Contents

A comprehensive software portfolio

A comprehensive software portfolio

A comprehensive software portfolio PROCON-WEB embedded System I.2

PROCON-WEB SCADA I.6

Automated Machine Learning I.10

AutoML ModelBuilder and ModelRuntime I.11

edgeML – Easy and flexible ML integration into automation I.12

edgeML Runtime I.14

Engineering Software I.15

u-link Remote Access Service I.16

3043800000 I.1
 PROCON-WEB Embedded Systems
A comprehensive software portfolio

Future-proof visualisations for Industrial IoT applications

PROCON-WEB Embedded Systems – the platform-independent
HMI software
In modern Industrial IoT and automation applications, machine data must be
available locally and in the cloud for all users. To ensure task-oriented provision
and intuitive use, the relevant information needs to be collected and visually
prepared.

PROCON-WEB Embedded Systems is a platform-independent visualisation

solution ideally suited for use in modern Industrial IoT applications. Thanks to its
low system requirements, it can be used on many different devices, and is also
available on Weidmüller u-OS family controllers through the App Manager. The
HMI is conveniently accessed via HTML5-compatible browsers and can therefore
be accessed from a wide variety of end devices.

Your special advantage:

• Portable and easy-to-parametrise HMI and Industrial IoT solution

• High performance with low resource requirements
• Compatible with devices with OPC-UA server, Modbus interface,
CODESYS® and u-Os PLCs
• Dynamic web interface with adaptive design and customisable
control elements

I.2 3043800000
 PROCON-WEB Embedded Systems

A comprehensive software portfolio

Many visualisation features
Predefined control elements, user and rights
management, multilingualism, data recording,
recipe management, alarm and message
processing, and many other features make
PROCON-WEB Embedded Systems versatile.
Maximum flexibility
PROCON-WEB Embedded Systems can be
used independently of hardware and operating
system. Web-based visualisation, support for
mobile devices, and open communication
standards increase flexibility.

Efficient project planning

Project management is accelerated through
features like a class-instance concept, structural
support and automated project generation.
Scripting and customisable control elements
increase flexibility for complex requirements.

3043800000 I.3
 PROCON-WEB Embedded Systems
A comprehensive software portfolio

PROCON-WEB Embedded Systems – Visualisation solutions for your Industrial IoT applications

Ordering data
Type Number of process variables, max. Number of devices Platform for runtime system Order No.
PROCON-WEB Embedded Systems runtime licences
PWEB-ES-RT-50/2 50 2 Windows, Linux, Docker Container 2992900000
PWEB-ES-RT-50/5 50 5 Windows, Linux, Docker Container 2992910000
PWEB-ES-RT-50/10 50 10 Windows, Linux, Docker Container 2992890000
PWEB-ES-RT-100/2 100 2 Windows, Linux, Docker Container 2992810000
PWEB-ES-RT-100/5 100 5 Windows, Linux, Docker Container 2992820000
PWEB-ES-RT-100/10 100 10 Windows, Linux, Docker Container 2992800000
PWEB-ES-RT-500/2 500 2 Windows, Linux, Docker Container 2992930000
PWEB-ES-RT-500/5 500 5 Windows, Linux, Docker Container 2992940000
PWEB-ES-RT-500/10 500 10 Windows, Linux, Docker Container 2992920000
PWEB-ES-RT-1000/2 1000 2 Windows, Linux, Docker Container 2992840000
PWEB-ES-RT-1000/5 1000 5 Windows, Linux, Docker Container 2992850000
PWEB-ES-RT-1000/10 1000 10 Windows, Linux, Docker Container 2992830000
PWEB-ES-RT-2000/2 2000 2 Windows, Linux, Docker Container 2992870000
PWEB-ES-RT-2000/5 2000 5 Windows, Linux, Docker Container 2992880000
PWEB-ES-RT-2000/10 2000 10 Windows, Linux, Docker Container 2992860000
PWEB-ES-RT-5000/2 5000 2 Windows, Linux, Docker Container 2875320000
PWEB-ES-RT-5000/5 5000 5 Windows, Linux, Docker Container 2875330000
PWEB-ES-RT-5000/10 5000 10 Windows, Linux, Docker Container 2875340000
PWEB-ES-DESIGNER-2000_FREE 2000 3037270000
PWEB-DESIGNER-PRO 2857650000
Basic Training 2938790000
Customer Specific Training 2938800000
SLA Technical Support 2938730000

Ordering data
Type Number of process variables, max. Number of devices Platform for runtime system Order No.
PROCON-WEB Embedded Systems runtime licences for u-OS

I
U-OS-PWEB-ES-RT-250/1_free 250 1 u-OS 2987740000
U-OS-PWEB-ES-RT-250/2 250 2 u-OS 3038630000
U-OS-PWEB-ES-RT-500/2 500 2 u-OS 2941960000
U-OS-PWEB-ES-RT-500/5 500 5 u-OS 2941970000
U-OS-PWEB-ES-RT-1000/2 1000 2 u-OS 2941980000
U-OS-PWEB-ES-RT-1000/5 1000 5 u-OS 2941990000
U-OS-PWEB-ES-RT-2000/2 2000 2 u-OS 2942000000
U-OS-PWEB-ES-RT-2000/5 2000 5 u-OS 2942010000
U-OS-PWEB-ES-RT-5000/2 5000 2 u-OS 2942020000
U-OS-PWEB-ES-RT-5000/5 5000 5 u-OS 2942030000
U-OS-PWEB-ES-RT-10000/2 10000 2 u-OS 2942040000
U-OS-PWEB-ES-RT-10000/5 10000 5 u-OS 2942050000
PWEB-DESIGNER-PRO 2857650000
PWEB-ES-DESIGNER-2000_FREE 3037270000
Basic Training 2938790000
Customer Specific Training 2938800000
SLA Technical Support 2938730000

I.4 3043800000
3043800000
I.5
I

A comprehensive software portfolio

 PROCON-WEB SCADA
A comprehensive software portfolio

Operate machines and systems via browser interfaces

PROCON-WEB SCADA – the future-proof visualisation solution

Easily scalable and platform-independent HMI and SCADA solutions can be used
flexibly and make relevant machine data available everywhere. They facilitate fault
processing as well as data recording and management to support the control of
complex processes.

PROCON-WEB SCADA as a Windows application for complex tasks simplifies the

project planning of modern multi-touch-capable user interfaces for automation.
The integrated web server enables the use of all HTML5-capable browsers
without special plug-ins. The comprehensive portfolio of communication drivers
facilitates the connection with all common control systems. Standardised open
interfaces guarantee problem-free integration into any IT surroundings.

Your special advantage:

• Easy creation of modern user interfaces without knowledge of web technologies

• Dynamic web interface with adaptive design and customisable control elements
• User and rights management including geographical rights assignment
• Ideal for control technology or complex digitalisation tasks
• Expanded scope of functions for more efficient data processing

I.6 3043800000
 PROCON-WEB SCADA

A comprehensive software portfolio

Future-proof solution
Intuitive user interfaces, the solutions are
especially future-proof with the help of an
adaptive UX design and the use of state-of-the-
art web technologies.

Efficient project planning

The class-instance concept and automation
objects with structure support accelerate
project planning. Scripting and customisable
control elements increase flexibility for special
requirements.

Simple scalability
From simple HMI applications to complex
SCADA applications, PROCON-WEB
SCADA is scalable and flexible, and can be
integrated into your IT environment through
open standards and interfaces.

3043800000 I.7
 PROCON-WEB SCADA
A comprehensive software portfolio

PROCON-WEB SCADA – Visualisation solutions for your Industrial IoT applications

Ordering data
Type Number of process variables, max. Number of devices Platform for runtime system Order No.
SCADA runtime licences
PWEB-SCADA-RT-500/2 500 2 Windows 2857420000
PWEB-SCADA-RT-500/5 500 5 Windows 2857430000
PWEB-SCADA-RT-500/10 500 10 Windows 2857470000
PWEB-SCADA-RT-1000/2 1000 2 Windows 2857480000
PWEB-SCADA-RT-1000/5 1000 5 Windows 2857520000
PWEB-SCADA-RT-1000/10 1000 10 Windows 2997580000
PWEB-SCADA-RT-2000/2 2000 2 Windows 2857540000
PWEB-SCADA-RT-2000/5 2000 5 Windows 2857550000
PWEB-SCADA-RT-2000/10 2000 10 Windows 2857560000
PWEB-SCADA-RT-5000/2 5000 2 Windows 2857570000
PWEB-SCADA-RT-5000/5 5000 5 Windows 2857580000
PWEB-SCADA-RT-5000/10 5000 10 Windows 2857600000
PWEB-SCADA-RT-10000/2 10000 2 Windows 2857610000
PWEB-SCADA-RT-10000/5 10000 5 Windows 2857620000
PWEB-SCADA-RT-10000/10 10000 10 Windows 2857630000
PWEB-SCADA-RT-30000/2 30000 2 Windows 2862170000
PWEB-SCADA-RT-30000/5 30000 5 Windows 2862180000
PWEB-SCADA-RT-30000/10 30000 10 Windows 2862190000
PWEB-SCADA-RT-60000/2 60000 2 Windows 2862200000
PWEB-SCADA-RT-60000/5 60000 5 Windows 2862210000
PWEB-SCADA-RT-60000/10 60000 10 Windows 2862220000
PWEB-DESIGNER-PRO Windows 2857650000
PWEB-ES-DESIGNER-2000_FREE Windows 3037270000
Basic Training 2938790000
Customer Specific Training 2938800000
SLA Technical Support 2938730000

I.8 3043800000
3043800000
I.9
I

A comprehensive software portfolio

 Automated Machine Learning
A comprehensive software portfolio

AutoML
The most important facts at a glance

Build and deploy end-to-end machine learning model solutions faster.

You only need your domain knowledge.

With AutoML, you can easily use advanced analytic functions

to optimise operations, improve product quality and enable
new business models. As a machine or process expert, you
can build and run machine learning models quickly and
easily without expert knowledge in data science. As machine
builder, the AutoML tool enables you to transform your data
and domain knowledge into ML models that add value to
your business. In manufacturing environments, the models
can be used in order to provide machine operators with real-
time analysis and insight during operation, for example. The
tool consists of AutoML ModelBuilder, with which models are
created, AutoML Runtime for cloud applications, and edgeML
ModelRuntime for on-premise applications.

The benefits for you

Accelerated innovation End-to-end solution Build customer relationships

Leverage your existing machine data Build and continuously improve and new business models
and domain knowledge and benefit ML models with AutoML ModelBuilder. Increase customer satisfaction with
directly from advanced analytics. improved products and services.
Maintain sovereignty over your Get a better understanding of your
own data. customers' needs.

Ordering data ModelBuilder Ordering data ModelRuntime

Type Number of users License term Order No. Type Number of models License term Order No.
AML-MB-EC-1Y 3 365 days 2864190000 Azure
AML-MB-MA-AZ-03 3 365 days 2819870000 AML-MR-MA-AZ-S 50 365 days 2886740000
AML-MB-EC-TRIAL-3M 3 90 days 2864180000 AML-MR-MA-AZ-M 150 365 days 2886750000
AML-MB-AZ-3-Trial 3 90 days 2885120000 AML-MR-MA-AZ-L 30 365 days 2886760000
AML-MR-AZ-Trial 10 90 days 2885130000
AML-Operations Basic 2896870000 easyConnect
SLA Technical Support 2938730000 AML-MR-EC-1Y-S 50 365 days 2976360000
AML-MR-EC-1Y-M 150 365 days 2976370000
AML-MR-EC-1Y-L 30 365 days 2976380000
AML-MR-EC-TRIAL-3M 10 90 days 2976350000
AML-Cloud-Cost 2896880000

AML-OPERATIONS BASIC 2896870000

AML-OPERATIONS PLUS 2896860000
SLA Technical Support 2938730000

I.10 3043800000
 AutoML ModelBuilder and ModelRuntime

A comprehensive software portfolio

AutoML ModelBuilder
From data to model in just a few steps

Feature of the ModelBuilder

The AutoML ModelBuilder is available as a cloud-based solution. On the basis of prepared
data, the user is guided through the following essential building blocks of the tool:

• Import machine and process data and analyse examined

• Data using automatically generated quality
criteria (such as missing words)
• Enrich data by creating custom features
• Set data into a context, for instance by
determining anomalies and normal behaviour
• Selection of the machine learning model to be
created possible (for instance a model to detect
or classify anomalies)
• The tool then automates the model creation
process, including feature engineering, required
preprocessing and post processing operations
• Selection of the created models possible
(for instance based on criteria like model
performance or plausibility)

I
AutoML ModelRuntime
For flexible use in the cloud

Features of AutoML ModelRuntime for the cloud

AutoML ModelRuntime makes it easy for an organization‘s machine or process experts to
bring ML models directly into the application – with complete flexibility in the cloud.

• Easily connect machine data with ModelRuntime via

databases or other standardised interfaces
• Import created models and assign them to specific
machines (multiple models can be used for the same
machine)
• Visualise results directly in the production process
with the help of the embedded graphic user interface
and trigger alarms, for instance
• Use and configure AutoML ModelRuntime with the
help of the provided interfaces

3043800000 I.11
 edgeML – Easy and flexible ML integration into automation
A comprehensive software portfolio

edgeML – Simple and flexible ML integration into automation

High flexibility: use hardware and OS agnostic ML models

edgeML makes it possible to integrate ML models into automation in a particularly

easy and flexible way – regardless of the hardware. And this is completely
independent of the hardware. This allows systems or processes to be monitored
continuously and efficiently with machine learning.
With edgeML, machine or process experts can quickly and easily put ML models
into practical use. The models can be conveniently managed and executed using
the integrated web server. The model results provide detailed insight into the
condition of the machine. This information can be used, for example, to optimise
maintenance intervals and improve product quality. edgeML thus makes an
important contribution to increasing production efficiency.

Simple integration Intuitive operation Supports ML models according

on controllers of ML models to ONNX format

edgeML is available as an app for u-OS edgeML supports MLOps and can In addition to models created by the
and can be conveniently installed via therefore be easily integrated into Weidmüller ModelBuilder, edgeML
the App-Manager. In addition, edgeML company processes. In addition, the also allows the execution of ML
is available for Docker and can also be runtime allows the models to be opera- models in the open ONNX standard.
installed as a Linux image on third- ted intuitively (e.g. through import and
party hardware. administration functions).

I.12 3043800000
 edgeML – Easy and flexible ML integration into automation

A comprehensive software portfolio

I
Open platform
(supports the
ONNX format)

Hardware-independent
deployment (docker
containers)
Intuitive import, parameterisation
and commissioning of ML models
on Edge devices

3043800000 I.13
 edgeML Runtime
A comprehensive software portfolio

edgeML Runtime
Machine and process managers who work on-premise use edgeML Runtime

Features of edgeML Runtime

• Quickly begin operation of ML models on edge devices –

importing is simple and parameterisation is intuitive
• Deploy your application on any hardware via docker
containers or on u-OS
• Trust in an open platform – we support the ONNX format
and MLOps

Ordering data
Type Number of models Platform for runtime system License term Best.-Nr.

I
edgeML
EML-RT-S 3 Linux, Windows unlimited 2885080000
EML-RT-M 5 Linux, Windows unlimited 2885090000
EML-RT-L 10 Linux, Windows unlimited 2885110000
EML-RT-XL Linux, Windows unlimited auf Anfrage
EML-RT-Trial 10 Linux, Windows 90 days 3037000000

U-OS-EML-RT-S 3 u-OS 3036820000

U-OS-EML-RT-M 5 u-OS 3036830000
U-OS-EML-RT-L 10 u-OS 3036840000
U-OS-EML-RT-XL u-OS auf Anfrage
U-OS-EML-RT-Trial 10 u-OS 90 days 3100520000

I.14 3043800000
 Engineering Software

A comprehensive software portfolio

Engineering Software

Just select your CODESYS® package and get in touch with your
Weidmüller sales contact.

Current information is available on our website:

www.weidmueller.com/u-os-apps

U-OS-CODESYS-BASIC
For applications that solve simple and individual automation tasks.

Ordering data
Type Code size Max I/O Order-No.
U-OS-CODESYS-BASIC-S 500 kB 64 2924000000
U-OS-CODESYS-BASIC-M 1 MB 128 2924020000
U-OS-CODESYS-BASIC-L 3 MB 256 2924030000

U-OS-CODESYS-STANDARD and U-OS-CODESYS-PERFORMANCE

For applications with more complex logic and an increased need for external communication.

Ordering data
Type Code size Max I/O Order-No.
Standard
U-OS-CODESYS-STANDARD-S 3 MB 512 2924040000

I
U-OS-CODESYS-STANDARD-M 8 MB 1.024 2924050000
U-OS-CODESYS-STANDARD-L 10 MB 2.048 2924060000
Performance
U-OS-CODESYS-PERFORMANCE-M 12 MB 4.096 2924070000
U-OS-CODESYS-PERFORMANCE-L 18 MB 8.192 2924080000

Web-Visualisation

Ordering data
Type Number of Tags Order-No.
U-OS-CODESYS-VISU-M 2.048 2924100000
U-OS-CODESYS-VISU-L 4.096 2924110000
U-OS-CODESYS-VISU-XL 8.192 2924120000
U-OS-CODESYS-VISU-XXL unlimited 3012570000

U-OS-CODESYS-COMMUNICATION
The CODESYS Communication M licence enables the use of the symbol configuration, the communication manager and the DataSource Manager.

Ordering data
Type Number of Tags Order-No.
U-OS-CODESYS-COMMUNICATION M 4.096 2984440000
U-OS-CODESYS-COMMUNICATION XXL unlimited 2924130000
U-OS-CODESYS-REDUNDANCY 2924090000
U-OS-CODESYS-OPC-UA-XL 3012600000

3043800000 I.15
 u-link Remote Access Service
A comprehensive software portfolio

u-link Remote Access Service – one tool for all cases

Advanced functions for convenient remote access management

The remote maintenance of machines and systems is often complex and

time-consuming. In addition, users also need a targeted and secure functional
connection to the associated IT systems. For many users, these two challenges
are a major obstacle to the worldwide connection of systems.

u-link guarantees quick and secure access to machinery and equipment while
enabling the efficient management of production facilities, user clients, access
rights or firmware versions. You choose: use u-link classic as a web-based portal
application, or u-link on easyConect, our cloud-based industrial service platform.

The intuitive u-link web portal can be quickly and easily configured and adapted
to specific processes without expert knowledge. Secured servers in Europe and
the USA provide an online platform that ensures conformity between different
IT systems when performing remote maintenance. easyConnect, in contrast,
combines your entire Weidmüller service landscape at a single location. In
addition to remote maintenance, realise your use cases easily, consistently and
without any relevant prior knowledge, thanks to the perfect interaction of platform,
devices and diverse software services. It is your intuitive, future-proof tool for your
path to the Industrial IoT.

Remote Access head

office of manufacturers
I

Individual system management

u-link can manage users and groups as well as their access
rights according to individual specifications. These include
group allocation and access permission to production
facilities.

Low configuration effort

With the intuitive user interface and without specific IT
knowledge, you can easily connect routers and clients to
each other. With u-link, you can quickly establish a several
($6<6(783 systems network.

Secure remote access and remote diagnosis

Remote access to machines and systems is provided
worldwide everywhere via secure VPN connection. The
high availability of the servers grants secure access to your
systems at all times.

Status monitoring and status message

Weidmüller Heartbeat can be used to report the availability
of a router to u-link. It facilitates status monitoring and
enables status messages from the installed router.
u-link.weidmueller.com

I.16 3043800000
 u-link Remote Access Service

A comprehensive software portfolio

Plant operator 3 Plant operator 1

u-link Remote
Access Service I

Mobile Remote Access

of manufacturers

Plant operator 2

3043800000 I.17
 I
A comprehensive software portfolio

I.18
3043800000
 Contents

Applications in practice
Applications in practice

Applications in practice Implement your own individual energy management system J.2

Intelligent energy management in practice J.4

edgeML – Easy and flexible ML integration into automation J.6

Modernise large power grids J.8

Reliable monitoring of grid quality J.10

Reliable residual current measurement J.12

3043800000 J.1
 Implement your own individual Energy Management system
Applications in practice

Implement your own individual Energy Management system

With our integrated expertise from a single source

Energy Management is a triad of recording all relevant energy consumption

data, analysing the information obtained, and comprehensive consulting on
possible saving potential. We at Weidmüller see the development of an Energy
Management system as a holistic task which combines expert advice with
intelligent hardware and software solutions to form a strong unit which is modular
in design and therefore tailored to your requirements.

Integrated planning
of the approach

J
Selection of suitable products,
solutions and functions

Modular adaptation to your

requirements

J.2 3043800000
 Implement your own individual Energy Management system

Applications in practice
Hardware components Software and controlling
Extraction of exact measurement data for analysis Determination of relevant indices for planning

Use our comprehensive hardware portfolio of selected „Total Energy The software modules of the Weidmüller Energy Suite meet your
Monitoring“ components for energy consumption measurement requirements, from the sensor level to the cloud. Parameterise
and monitoring, integrated analysis of the quality of electrical supply our field devices using ecoExplorer go, digitise the data using the
networks and for efficient, convenient provision of measurement u-create data hub, conduct standardised analyses using the u-create
data. ResMa® or forecast load peaks with the u-create energetics System.
The perfect interaction between Weidmüller field devices and the
components of the Weidmüller Energy Suite ensures the greatest
possible predictability, even for complex requirements.

J
• Energy meters • Power supply solutions • Recording process and energy data
• Energy analyser • Connection technology • Registering energy and raw materials prices
• Energy loggers • u-mation toolbox • Forecasting costly load peaks
• Measurement converter • Industrial communication • Cost centre analyses
disconnector terminals infrastructure • Long-term data archiving
• Current transformers • Customer-specific • Database interfaces for MES/SCADA systems
Plug&Play solutions
• Rogowski coils

Simple, Use of Option of Compact – Server –

cost-effective high-quality, implementing IPC-based entry- Extensive
integration into tried and tested tailored solutions level solution scalable
existing systems standard
components Customer-specific Record, automate Strong integration
Broad range assembly and and bundle into your own
of universal-fit Well proven construction of measurement data infrastructure for
connection components that components to on a central basis. extensive data
solutions to connect are tailored to meet individual Create transparency collection. Ideal for
existing hardware each other from requirements about energy media cross-site Energy
the Weidmüller and draw up initial Management.
standard range reports.

3043800000 J.3
 Intelligent energy management in practice
Applications in practice

Intelligent energy management in practice

Insights into Weidmüller‘s „transparent factory“

Weidmüller has a long tradition of handling energy and resources responsibly. One
perfect example for the practical implementation of our collective know-how and
the effects which can be achieved is our production hall at the Detmold site. We
can use specific examples to show interested customers how well modern Energy
Management works in practice.

From
Production.
For Production.

Anchoring Energy Management

All employees are given comprehensive training to increase
awareness of conserving energy as a resource. Projects to
optimise procurement, increase production efficiency, for new
buildings and renovation and handling Energy Management
tools are carried out in order to reduce energy consumption even

J
further in future.

Transparency at every level

Depending on the degree of detail required, we measure
Energy flows at all five levels in our „transparent factory“:

• Measurement at the point of interface with the grid in order to continuously monitor the power quality
• Measurement at factory level to optimise whole sites and departments.
• Measurement at production line level to optimise individual production areas
• Measurement at machine level to optimise complex process structures
• Measurement at machine module level to optimise individual machine and plant elements

Production area Employees in production Annual CO₂ saving

6.600 m² 155 people approx. 1.665t CO₂

J.4 3043800000
 Intelligent energy management in practice

Applications in practice
Visit our „transparent factory“
with its multi award-winning
Needs-based lighting control energy efficiency measures.
Reduction of basic lighting helps reduce the basic load. Where
more light is required, lighting positioned as required provides
optimum adapted lighting. The use of efficient control and Arrange an appointment with your
lighting systems minimises the energy required further still. sales engineer

Systematic minimisation of energy losses

Load-optimised main consumers guarantee optimum energy
use with reduced energy peaks Systems in standby mode are
switched off. This saves energy and helps reduce the basic
and peak loads. Transformers are installed at the performance
hotspots near the main consumers and fitted with efficient
technology to avoid conversion losses. Distribution routes in the
low voltage sector which are as short as possible also minimise
conductor losses.

Efficient use of compressed air

Cascaded compressors are intelligently controlled to ensure the
network pressure built up is only what is required. Cables are
carefully routed, sealed and constantly checked to minimise cable
losses. Employees are made aware of the most efficient use of
compressed air to reduce the consumption of compressed air
further still.

Efficient heating and cooling

The excess heat generated by processes is transferred to the
heating system. The heat extraction reduces the burden on the
machine cooling system. A free-cooler uses the ambient air for
cooling with minimum use of electrical power and even takes
over all cooling work in winter. The core processor heat created
when generating compressed air is also used and fed back into
the heating system.

3043800000 J.5
 Collect energy and process data with ResMa®
Applications in practice

Energy and process data acquisition - step by step

More than energy management: ResMa® helps to optimize right up to the
process level
Good energy management is the result of the interaction between people and technology. Both sides
contribute their expertise. This report outlines what to expect from a good system.

It is more important than ever to reduce a company‘s energy Interactively adaptable charts help provide a detailed
consumption and to increase efficiency with targeted analysis; they allow for the optimal representation of
measures. High energy costs and legal regulations require a correlations for every situation and can be saved for further
targeted and structured approach. editing, including by other colleagues. Customable reports
According to company information, Weidmüller GTI‘s balance energy and KPIs from production in a clearly
ResMa® energy management system helps to record and arranged layout.
monitor energy flows and process data as well as evaluate
and optimise efficiency. „The generation of meaningful EnPIs Energy management according to ISO 50001
(KPIs) including production parameters and their monitoring
using energy monitoring is the basis for the reduction of daily With the ResMa® energy management system, Weidmüller
monitoring expenses“, explains Weidmüller GTI in a press GTI Software is offering a comprehensive software solution
release. for energy management according to ISO 50001, The energy
and resource manager allows manufacturing companies
Consumption overview and other organisations to systematically and continually
increase energy efficiency. The system supports all tasks for
The consumption overview and the resulting energy efficient and active energy management, refers to factors
balancing means that approaches can quickly be determined that can be influenced by the company and can be adapted
with the aim of expanding the measuring equipment or to individual requirements. At the same time, the solution
introducing concrete saving potential. These approaches are also includes the necessary support for the integration
documented in the PDCA cycle and then reviewed. into existing automation technology, control technology or

J.6 3043800000
 Collect energy and process data with ResMa®

Applications in practice
building automation and for the connection of the company‘s network failure, ResMa® -Connect industrial PCs were used,
IT systems. Customer-specific requirements regarding which are set up close to the measurement technology and
energy planning, peak-load optimisation or on-demand which cache the data.
control can be tailored to the customer‘s needs by means of
customised support. „ResMa® allowed us to carry out the step-by-step
development of our EnMS on our own and opened up
User in Kronach potential for integrating extensive information from
production“, says Wolfgang Fehn, the management represen-
Horst Scholz GmbH in Kronach, Franconia, uses ResMa® for tative for quality and environment at Horst Scholz GmbH.
energy management in multiple production and administ-
ration buildings; the company specialises in the production Process data recording
of high-precision plastic parts for microtechnology and
medical technology. Because some buildings already had The third expansion stage has now been implemented,
energy meters, these were to be integrated into the system. involving the recording of process data from automation
Additional energy meters were connected via Modbus TCP technology. For this purpose, Scholz uses three ResMa®
based on the good network infrastructure that was already in connectors and a direct network connection to the
place. most important machines. This makes it possible to use
extensive data from the production process directly for
Modbus-TCP KPI development and the performance of analyses within
ResMa®.
The first step involved the company independently adding
all of the meters in its first building to the system. Convinced
by the simple connection, the company then equipped
the newly constructed building with Modbus TCP-capable
meters as well. In order to prevent data loss in the event of a

3043800000 J.7
 Modernise large power grids
Applications in practice

How can large-scale electricity grids be modernised successfully?

Support from Weidmüller with key component

If, for example, the electricity grids of a six-digit square kilometre area need to be renewed, this
amounts to a costly infrastructure project. If the substations also need to be modernised and
digitalised as part of a sub-project, the control cabinets need to be renewed in their entirety.
Experts from Weidmüller support control cabinet builders who specialise in automation in power
distribution.

Any control cabinet manufacturer that needs to find a partner Cooperation from the very beginning
whose components comply with regional and national
approval regulations for monitoring power quality will find When replacing the control cabinets, it is crucial to ensure
what they are looking for with Weidmüller. With its key universal monitoring of the transformers. This is where
product Energy Analyser D550, a multifunctional measuring the Energy Analyser can really show off its strengths. It
device for monitoring voltage quality in accordance with measures various parameters of the network quality such as
IEC 61000-2-4 and EN 50160, among other things, short-term interruptions, transients, starting currents, voltage
Weidmüller even satisfies the most demanding requirements. fluctuations or harmonics caused by contamination. It
Another advantage is the fact that as a major manufacturer, transfers this data via a Modbus interface for evaluation. This
Weidmüller is geared towards being able to supply large provides the company with transparent information about
quantities at short notice. current incidents and allows it to monitor the networks in real

J.8 3043800000
 Modernise large power grids

Applications in practice
time while guaranteeing and monitoring operation. When Overview - a real winner for Weidmüller
data is recorded and analysed, it is simultaneously entered
into the Industrial IoT, giving the company the opportunity to • Weidmüller has the right product with the necessary
fully exploit the opportunities offered by digitalisation. approvals and certifications for monitoring network quality
• Weidmüller provides support right from the start of
Thanks to its decades of experience, Weidmüller can the project, is on hand to assist in an advisory capacity
efficiently support and advise control cabinet builders from and supervises the project consistently right through to
the very outset of a project. During a qualification phase for a implementation
recent project, Weidmüller initially provided samples so that • As a large manufacturer, Weidmüller is able to guarantee
the Analyser could be put through its paces. This convinced the delivery of the required high quantities.
the control cabinet builder just as much as Weidmüller‘s
commercial offer, and led them to include Weidmüller in Outlook
the tender as a listed supplier. Together they were awarded
the contract and were able to implement the project By providing worldwide support for major projects in the
successfully. The project volume for Weidmüller ultimately field of power engineering and power distribution, this opens
amounted to a total of 1,400 units. up desirable target markets for Weidmüller. Its extensive
portfolio for control cabinet building and power distribution
provides control cabinet manufacturers with support on site
and establishes Weidmüller in the local energy sector.

3043800000 J.9
 Reliable monitoring of grid quality
Applications in practice

Reliable monitoring of grid quality

Certified as class A in accordance with IEC 61000-4-30

There is a direct correlation between the quality of the power Generating relevant results
supply and the lasting security of supply with no noticeable
interruptions. Disruptions and damage are often caused by For monitoring it is advisable to use class-A energy analysis
overvoltage and transients. In addition to a reliable supply, devices, which are connected alongside the charging meters.
high-quality voltage (* point 2. in the figure) is crucial to the Only analysers that have been certified as class A ensure that
reliable operation of equipment with all of its electronic the results are reliable, repeatable and comparable. Because
consumers, such as industrial control units or EDP facilities. regardless of whether you want to hold a “guilty party”
The grid operator must keep the voltage and frequency as to account for damages incurred or identify and remedy
constant as possible, and is liable irrespective of culpability sources of disruption as a precaution, this always requires
in the event of disruptions (* point 3. in the figure). Precise reliable and documented measurements that even stand up
analysis and documentation using certified procedures in court if necessary.
are required in order to achieve the greatest possible
transparency regarding energy consumption and voltage
quality. Detailed insights into equipment

The recording of power quality analysers, which Weidmüller

Looking for causes has been selling for years, can also be helpful in this regard.
Their extensive analyses and documentation provide
Voltage quality is becoming relevant for an increasing a detailed insight into a system. In addition to voltage,
number of providers and consumers – including in the frequency and curve shape they also record all forms of
field of renewable energies. More and more photovoltaic disruption. These could be flicker effects or brief voltage
and wind power installations have been connected to the drops, which are typical for automated reclosure following
medium-voltage grid over the last decade (* point 1. in the electric arc short-circuits. Harmonics from non-linear
figure). The grid operators are responsible for the operation consumers can also significantly impact the function of
of medium-voltage grids. They therefore have a significant other devices. Unlike the basic oscillation in the three-phase
interest in monitoring the quality of electricity at the point of system, all of the harmonics that are divisible by three in the
connection with equipment. neutral conductor reinforce each other instead of cancelling

J
each other out. This can cause the current load on the neutral
conductor to rise beyond permissible levels. Harmonics are
Reliable monitoring and error detection typically mainly generated by frequency converters as well as
surge voltages from switching operations.
Weidmüller‘s product portfolio includes the Energy
Analyser 750 power quality analyser for comprehensive
monitoring. The capabilities it offers allow comprehensive
error detection, because in addition to continuously
recording consumption it also monitors residual currents.
Overvoltage, asymmetries, transients, flicker and other
disruption parameters are recorded and analysed. The
Energy Analyser 750 complies with all common standards
such as EN 50160, IEEE 519 and IEC 61000-2-4, and can be
integrated into most communications architectures at low
cost thanks to a variety of interfaces.

J.10 3043800000
 Reliable monitoring of grid quality

Applications in practice
Transmission Grid
1.
3.

Distribution Grid
2.

1.

1. Producer
2. Consumer
3. Grid operator

3043800000 J.11
 Reliable residual current measurement
Applications in practice

Reliable residual current measurement

Use of RCM (Residual Current Monitoring) measuring instruments

Residual currents caused by the failure of insulation can constitute a significant Personnel protection
System protection
risk to safety in electrical systems. Using an appropriate protective concept it is mA
Fire protection
Switch-off

possible to detect residual currents, eliminate insulation faults in good time and
therefore ensure the availability of the system.
Message
from RCM
RCM stands for Residual Current Monitoring and means the monitoring of residual

Residual current
currents in electrical systems. This current is calculated as the sum of the currents
of all conductors, apart from the protective earth (PE), which feed into the system. Information advantage
t Time
Residual currents are typically the result of insulation faults, leakage currents or
EMC filter leakage currents for example.

Whilst GFI devices (ground failt interrupter) switch off the power supply in the Fig.: Report prior to switching off - an aim of residual current
event of a certain residual current being exceeded, RCM measuring devices monitoring
indicate the actual value, record the long-term development and report the
exceeding of a critical value. This message can also be used in order to switch
off the power supply via external switching devices (contactors, relays). Through
the use of residual current measuring devices it is possible to detect and report
residual currents in a timely manner. It is possible to initiate counter measures in
good time, so that it is not necessary to switch the system off. This facilitates the
implementation of measures in the event of slowly deteriorating insulation values
or steadily rising residual currents – caused for example by ageing insulation –
before the system is switched off.

Further errors that are detectable by a RCM measurement:

• Insulation faults of lines and electrical operating resources
• Residual currents from electrical loads
• Defective PP power capacitors for the PFC

J
• Defective components in switched mode power supplies, e.g. in computers
• Correctness of TNS systems (Terra Neutral Separate)
• Disclosure of impermissible PEN connections
• Avoidance of neutral conductor reverse currents to grounded equipment

Residual current monitoring in conjunction with energy measurement in combined

energy / RCM measuring devices in electrical systems constitutes a measure
for fire protection and maintenance prevention. Down times and the associated
costs are thereby reduced. Timely and preventative maintenance – facilitated
through the information additionally gained from an RCM measuring device – also
significantly enhances the efficiency and availability of a system.

Constant RCM monitoring is of particular significance in preventing unwanted

surprises in ongoing operation, and provides consistent information regarding the
actual status of the electrical system.

J.12 3043800000
 Reliable residual current measurement

Applications in practice
Fundamental measuring process with RCM L1 I L2 I L3 I N

The functionality of RCM measuring devices is based on the differential current

Fault current = 0 Sum > 0
principle. This requires that all phases be guided through a residual current
System is OK Fault in the
transformer at the measuring point (outlet to be protected), with the exception system
of the protective earth. If there is no failure in the system then the sum of all
currents will be nil. If, however, residual current is flowing away to ground then
the difference will result in the current at the residual current transformer being
evaluated by the electronics in the RCM measuring device.

Typical applications

RCM measuring instruments are mainly used in systems where a high level of
availability is required, such as: The following measuring
• Data processing centres, production facilities, hospitals, telecommunications instruments support RCM
• TN-S systems with strict EMC requirements measurement:
• Equipment at risk of fire
• Equipment in cleanroom conditions • Energy Meter 700-PN
• Research facilities, laboratory technology areas • Energy Meter 750
• Energy Analyser 550
Weidmüller combines Energy Management, grid quality and residual current • Energy Analyser 750
monitoring in a single system, providing you with a holistic solution from medium
voltage down to the individual circuit.

Residual current monitoring

L1
L2
L3
PEN
N
PE

L1 L2 L3 N I1 I2 I3 I4 I5 I6
M
Energy Meter 750 (RCM) 3~

3043800000 J.13
 J
Applications in practice

J.14
3043800000
 Contents

Service and support

Service and support

Service and support Service connects – worldwide V.2

Engineering services and customised products V.3

easyConnect – Your Industrial Service Platform V.4

Support Center V.6

Additional support services V.7

Weidmüller Configurator: intuitive, uncomplicated & fast digital engineering V.8

Your digital ordering options at Weidmüller V.10

3043800000 V.1
 Service connects – worldwide

Our expertise for your requirements

Service and support

Service connects – worldwide

Automation technology functions are becoming more complex in a globally-oriented world facing
ambitious targets in terms of energy efficiency and smart production. We are your equal partners for
the best connections in Industrial Connectivity.

Our personal support answers all questions reliably and expertly. During planning, installation or
operation our service and support offer is your best companion.

In short: Weidmüller’s global service combines our expertise with your requirements.

Your way to our service

www.weidmueller.com/service

V.2 3043800000
 Engineering services and customised products

Engineering services and customised products

Service and support

Automation engineering and connectivity consulting belongs to our services as well as assembly of engineered products. We
also support the process from the idea to the product with our Weidmüller Configurator and the Configure-to-Order process.

Consulting and engineering Connectivity Consulting Assembled terminal rails - Flexibly

The challenge for you is reducing Increase your competitiveness - designed to suit your requirements
costs and increasing efficiency. This supported by our experts Your processes in panel building have
requires intelligent, individual solutions. Our drive is to optimise your to be fast, flexible and productive. This
Whether it is modified products, pre- competitiveness. That‘s why our team is the only way you can cut your costs
fitted mounting rails or complete small of experts supports you in significantly and increase efficiency. Depending
cabinets – our application centres increasing your efficiency in electrical on the application in question, you
provide a highly qualified custom-made machine design and control cabinet will have different requirements with
engineering and production service. construction. With proven products and respect to the engineering service,
services from the Weidmüller portfolio delivery speed and flexibility to be
– and with the experience gained from provided.
over 300 projects worldwide.

Modified and assembled Fast Delivery Service - Your ideas

enclosures - Competitive deserve a quick realisation

V
advantages included Obtain offers 24/7 and within minutes,
To compete internationally, your plants including directly orderable article
need to satisfy high standards of numbers with our Fast Delivery Service.
safety, quality and performance. The The Weidmüller Configurator (WMC)
smart combination of consultation, for planning and configuration is key
application expertise and industry for consistent processes. Dispatch your
know-how is our key to finding a orders in 5 days. Assemble individual
custom-fit solution for your application. terminal strips and enclosures from
Reduce costs and increase efficiency. batch size 1!

3043800000 V.3
 easyConnect – Your Industrial Service Platform

Your ticket to the world of digital service

Service and support

easyConnect – Your Industrial Service Platform

Our cloud-based platform is your ticket to the world of digital services from Weidmüller, and the
intuitive and future-proof tool for your way to the Industrial IoT. Realise your use cases easily,
consistently and without any relevant prior knowledge, thanks to the perfect interaction of platform,
devices and diverse software services.

As an open, modular and perfectly integrable system, the platform is your enabler for a wide range of
use cases. Increase your efficiency and unleash your full innovation potential with easyConnect.

Interested in using easyConnect?

Learn how to get started with easyConnect step-by-step.

www.weidmueller.com/easyconnect

V.4 3043800000
 easyConnect – Your Industrial Service Platform

Service and support

Why should you use easyConnect?
• You want to enter your digital transformation step-by-
step?
• You want to make the step into Industrial IOT, but have
no or little IT expertise?
• You want to use your digital data for smart & scalable
services?
• You want to offer digital services (such as customised
dashboard) to your customers?
• You want to improve your service offering and
efficiency, e.g. through remote access?
• You feel Weidmüller‘s digital services are interesting,
but you have „your cloud“ already?

Weidmüller comes up with the solution: easyConnect, the new digitalisation platform. It bundles Weidmüller‘s digital
services at one place in the cloud and connects them with various Weidmüller devices.
With easyConnect you start digitalising your application step-by-step without ballast in a secure way.

The following services are initially available on easyConnect:

Device management
Adding and managing cloud-connected devices is typically
the first step in any Industrial IoT use case.

Asset management
The asset management service is a modelling tool that
allows users to model their assets and processes and link
them to relevant time series data.

Remote access (u-link)

u-link guarantees a quick and secure access to machines and
plants while also allowing for efficient management.

Data visualisation

V
easyConnect data visualisation services enable users to
view, monitor and display live and historical data.

AutoML
With Weidmüller Industrial AutoML, you can optimize
operations, increase product quality and develop new
business models by benefiting from advanced analytics.

3043800000 V.5
 Support Center

Expand the possibilities of our products

Service and support

Our Support Center provides you with comprehensive, clear and personal
assistance

Receive fast and intuitive support to get the most out of our products in your application. In our new
Support Center you can search or navigate to the many application notes, product information, video
tutorials or software downloads of our products.

• Everything at a glance – One central support hub, where all relevant information is available
• Powerful search – Provides filter functions for various types of information and products
• Different views and navigations – Content provided in views product information, engineering
support or software downloads
• More than 170,000 downloads – Application notes, video tutorials, templates and examples,

V
user documentation, engineering data, ...
• Personal contact – Direct access to your personal technical contact in your country

Explore the world of our new Support Center

support.weidmueller.com

V.6 3043800000
 Additional support services

Additional support services

Service and support

Training and Webinars Repairs and replacement parts Security advisory board
Stay tuned in a world that is We offer repair and components Our Product Security Incident
accelerating. In our entertaining for our Workplace Solutions as well Response Team (PSIRT) continuously
interactive webinars, we offer you as assistance for other Weidmüller informs you about possible security-
the opportunity to learn about new products. Find out how our experts can related vulnerabilities of our products.
products and technology topics and to help you with your repair request.
interact with our experts.

Engineering data Product change notifications Technical product catalogues

For the quick integration of our Technical modifications of our products Technical data for our entire program in
products into your design, there always available online. Industrial Connectivity for download in
are a lot of digital product data for PDF-format.
engineering systems like EPLAN, Zuken
E3.series, WSCAD and many others
available for download.

3043800000 V.7
 Weidmüller Configurator: intuitive, uncomplicated & fast digital engineering

From the idea to the finished solution

Service and support

Weidmüller Configurator: intuitive, uncomplicated & fast digital engineering

Digital engineering can be so easy – with the Weidmüller Configurator!

It´s a free to use software application to easily configure industrial solutions. It features more than
12,000 articles from multiple product families including rail-mounted components, industrial and ex-
certified enclosures, Heavy Duty Connectors, remote I/O-systems and PCB connectors.

Unleash the full power of digital engineering:

Our application wizards help you choose the right articles.

Place, mark or modify them to your needs and get your solution visualized in 3D – what you see is
what you get!

Our promise: Speed up your solution planning process by up to 70%!

Your benefits:
• Proven configuration designs in real 3D: The plausibility and collision check with the
complete digital documentation ensures that you can rely 100% on your configuration.
• Seamless E-CAD Roundtrip: Interfaces enable the simple exchange of product data between
the WMC and all common engineering tools, such as Zuken E3 or EPLAN Electric P8.
• Sample Service & Fast Delivery Service: to support your design-in process, we offer a 3-day
sample service for many products. Inquire them directly online – for free!
You want your solution right away? Our Fast Delivery Service guarantees delivery of individually
assembled terminal strips or enclosures within a few days.

Get started online now!

The Weidmüller Configurator makes solution planning easy. Visit our website for more information,
tutorials and download it for free:

V
www.weidmueller.com/wmc

or register on easyconnect.weidmueller.com
and use it online.

V.8 3043800000
 Weidmüller Configurator: intuitive, uncomplicated & fast digital engineering

Service and support

V
Wizards: Assistants: 1-click documentation:
Design complete applications within few Finalize your solutions with supporting Get assembly drawings for production – only 1
clicks – even without detailed product assistants to add cross-connectors, markers or click. Bill of material – only 1 click. The complete
knowledge – for signal wiring, load monitoring, colors and verify the faultlessness. Automatic solution documentation including all component
instrument transformers, enclosures, remote modes save valuable time! data sheets – you´re right, only 1 click!
I/O-systems and many more.

3043800000 V.9
 Your digital ordering options at Weidmüller

Digital ordering options

Service and support

Your digital ordering options at Weidmüller

Find and easily select the products you need, with convenient ordering: as your Partner in Industrial Connectivity, we know
what counts in purchasing. That is why we offer you a variety of options for ordering products from us and optimising your
purchasing processes to meet your individual requirements and your workflow. The choice is yours.

Order via the Weidmüller eShop

Our eShop offers you access to the complete Weidmüller product range around
the clock – directly from a PC, tablet, or smartphone. The intuitive user guidance
supports you as you select from over 50,000 products. Technical data, prices,
and availabilities are available at any time. The shopping basket with check out
function lets you place an order in seconds. Convenient additional functions like
CSV upload, order history, reports, or custom order templates make your ordering
processes even more efficient.

Order via the OCI interface

The Open Catalogue Interface (OCI) facilitates the exchange of data between
your enterprise resource planning system and our eShop. This means that our
eShop is integrated into your system via an OCI interface, so you have access to
our complete product catalogue from your enterprise resource planning system.
You can filter and select products, place them in your shopping basket and place
direct orders without changing your software application. The open OCI standard
is supported worldwide from a variety of software providers.

Order via the EDI interface

Our Electronic Data Interchange (EDI) also offers you the option of ordering our
products directly from your enterprise resource planning system. All order data is
transmitted automatically to our system and processed immediately. Orders, order

V
confirmations, invoices, and delivery notices are transmitted lightning fast. This
helps you make your purchasing processes even more efficient.

We will be glad to advise you on which solutions are suitable for you and how implementation is possible.
Get in touch with us
www.weidmueller.com/digital-order

V.10 3043800000
 Contents

Index

Index
Index Index Type X.2

Index Order No. X.4

Addresses worldwide X.6

3043800000 X.1
 Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

A E ESO UR20 DIN A4 WS 1429430000 G.27

P
AML-Cloud-Cost
AML-MB-AZ-3-Trial
2896880000
2885120000
I.10
I.10
EM CONNECTOR CURRENT ATTB
EM CONNECTOR VOLTAGE ATTB
8000100996
8000100997
E.23
E.23 I P-CON COM 100
P-CON COM 1000
3053940000
3053970000
H.13
H.13
AML-MB-EC-1Y 2864190000 I.10 EM110-RTU-2P 7760051002 B.6 IE-USB-A-MICRO-1.8M 1487980000 G.9 P-CON COM 10000 3054000000 H.13
AML-MB-EC-TRIAL-3M 2864180000 I.10 EM110-RTU-2P 7760051002 B.8 IE-USB-A-MICRO-1.8M 1487980000 G.22 P-CON COM 250 3053950000 H.13
AML-MB-MA-AZ-03 2819870000 I.10 EM111-RTU-2P 7760051001 B.6 IE-USB-A-MICRO-1.8M 1487980000 G.23 P-CON COM 2500 3053980000 H.13
AML-MR-AZ-Trial 2885130000 I.10 EM111-RTU-2P 7760051001 B.8 IE-USB-A-MICRO-1.8M 1487980000 G.26 P-CON COM 50 3053930000 H.13
Index / Type

AML-MR-EC-1Y-L 2976380000 I.10 EM111-RTU-2P-MID 3099190000 B.6 IE-USB-A-MICRO-1.8M 1487980000 G.27 P-CON COM 500 3053960000 H.13
AML-MR-EC-1Y-M 2976370000 I.10 EM111-RTU-2P-MID 3099190000 B.11 Inbetriebnahme [Stunde] 2938840000 H.11 P-CON COM 5000 3053990000 H.13
AML-MR-EC-1Y-S 2976360000 I.10 EM120-RTU-2P 7760051004 B.6 Installation Standard 2938810000 H.11 P-CON DRV ALLENBRADLEY 3053920000 H.13
AML-MR-EC-TRIAL-3M 2976350000 I.10 EM120-RTU-2P 7760051004 B.9 IOT-GW30 2682620000 G.30 P-CON DRV CODESYS 3053910000 H.13
AML-MR-MA-AZ-L 2886760000 I.10 EM120-RTU-2P-MID 3099200000 B.6 IOT-GW30-4G-EU 2682630000 G.31 P-CON RUN 3053900000 H.13
AML-MR-MA-AZ-M 2886750000 I.10 EM120-RTU-2P-MID 3099200000 B.11 IOT-GW30-4G-NA 2682640000 G.31 PILOTKIT U-SENSE VIBRATION 3008440000 F.31
AML-MR-MA-AZ-S 2886740000 I.10 EM122-RTU-2P 7760051003 B.6 PM 2.7/2.6 MC NE WS 1323710000 G.9
AML-Operations Basic
AML-Operations plus
2896870000
2896860000
I.10
I.10
EM122-RTU-2P
EM122-RTU-2P-MID
7760051003
3099210000
B.9
B.6 K PM 2.7/2.6 MC NE WS
PM 2.7/2.6 MC NE WS
1323710000
1323710000
G.11
G.15
EM122-RTU-2P-MID 3099210000 B.12 KCMA 5-1000-5A-5VA-0.5 2753400000 E.9 PM 2.7/2.6 MC NE WS 1323710000 G.16

B EM220 BRACKET
EM220-RTU-4DI2DO
3068970000
7760051005
B.10
B.6
KCMA 5-250-5A-1.5VA-1
KCMA 5-400-5A-1VA-0.5
2753360000
2753370000
E.9
E.9
PM 2.7/2.6 MC NE WS
PM 2.7/2.6 MC NE WS
1323710000
1323710000
G.17
G.18
Basic Training 2938790000 H.11 EM220-RTU-4DI2DO 7760051005 B.10 KCMA 5-500-5A-2.5VA-0.5 2753380000 E.9 PM 2.7/2.6 MC NE WS 1323710000 G.22
Basic Training 2938790000 I.4 EM220-RTU-4DI2DO-GW 7760051006 B.6 KCMA 5-600-5A-2.5VA-0.5 2753390000 E.9 PM 2.7/2.6 MC NE WS 1323710000 G.23
Basic Training 2938790000 I.8 EM220-RTU-4DI2DO-GW 7760051006 B.10 KCMA-18-100-1A-0.3VA-1 2752990000 E.4 PM 2.7/2.6 MC NE WS 1323710000 G.26
BATTERY-CR1220-3V 2684410000 G.26 EML-ER-RT-L 2885110000 I.14 KCMA-18-100-1A-1,25VA-3 1482010000 E.4 PM 2.7/2.6 MC NE WS 1323710000 G.27
BATTERY-CR1220-3V 2684410000 G.27 EML-ER-RT-M 2885090000 I.14 KCMA-18-125-1A-0.5VA-1 2753000000 E.4 PM 2.7/2.6 MC SDR 1323700000 G.9
EML-ER-RT-S 2885080000 I.14 KCMA-18-125-1A-1,5VA-3 2752980000 E.4 PM 2.7/2.6 MC SDR 1323700000 G.11

C EML-RT-Trial
ENERGY ANALYSER 550
3037000000
2425500000
I.14
C.4
KCMA-18-150-1A-1VA-1
KCMA-18-150-1A-2VA-3
2753010000
2420770000
E.4
E.4
PM 2.7/2.6 MC SDR
PM 2.7/2.6 MC SDR
1323700000
1323700000
G.15
G.16
CMA-101-2500-5A-10VA-0,5 2680250000 E.12 ENERGY ANALYSER 550 2425500000 C.6 KCMA-18-150-5A-1VA-1 2753030000 E.4 PM 2.7/2.6 MC SDR 1323700000 G.17
CMA-101-2500-5A-10VA-1 2680190000 E.12 ENERGY ANALYSER 550-24 2602580000 C.4 KCMA-18-200-1A-1.5VA-1 2753020000 E.4 PM 2.7/2.6 MC SDR 1323700000 G.18
CMA-31-100-5A-2,5VA-1 1482030000 E.12 ENERGY ANALYSER 550-24 2602580000 C.6 KCMA-18-200-1A-3VA-3 2420760000 E.4 PM 2.7/2.6 MC SDR 1323700000 G.22
CMA-31-125-5A-2,5VA-0,5 2680200000 E.12 ENERGY ANALYSER 750-230 2534130000 C.4 KCMA-18-200-5A-1,5VA-1 2753040000 E.4 PM 2.7/2.6 MC SDR 1323700000 G.23
CMA-31-150-5A-2,5VA-0,5 2421030000 E.12 ENERGY ANALYSER 750-230 2534130000 C.7 KCMA-18-250-1A-1,5VA-1 1482000000 E.4 PM 2.7/2.6 MC SDR 1323700000 G.26
CMA-31-150-5A-5VA-1 2420960000 E.12 ENERGY ANALYSER 750-24 2534160000 C.4 KCMA-18-250-1A-4VA-3 2420750000 E.4 PM 2.7/2.6 MC SDR 1323700000 G.27
CMA-31-200-5A-2,5VA-0,5 2421020000 E.12 ENERGY ANALYSER 750-24 2534160000 C.7 KCMA-18-250-5A-1VA-0.5 2753050000 E.4 Project Coordination 2938820000 H.11
CMA-31-200-5A-5VA-1 2420950000 E.12 ENERGY ANALYSER D550 2425510000 C.4 KCMA-18-50-1A-1VA-3 1482020000 E.4 PWEB-DESIGNER-PRO 2857650000 I.4
CMA-31-250-5A-5VA-0,5 1482050000 E.12 ENERGY ANALYSER D550 2425510000 C.5 KCMA-18-75-1A-1VA-3 2420780000 E.4 PWEB-DESIGNER-PRO 2857650000 I.8
CMA-31-250-5A-5VA-1 2420940000 E.12 ENERGY ANALYSER D550-24 2489780000 C.4 KCMA-28-200-1A-0.3VA-1 2753060000 E.5 PWEB-ES-DESIGNER-2000_FREE 3037270000 I.4
CMA-31-300-5A-5VA-0,5 2420990000 E.12 ENERGY ANALYSER D550-24 2489780000 C.5 KCMA-28-250-1A-1VA-1 2753070000 E.5 PWEB-ES-DESIGNER-2000_FREE 3037270000 I.4
CMA-31-400-5A-5VA-0,5 2420980000 E.12 ENERGY LOGGER D550 2425520000 D.3 KCMA-28-250-5A-1VA-1 2753110000 E.5 PWEB-ES-DESIGNER-2000_FREE 3037270000 I.8
CMA-31-400-5A-5VA-1 2420920000 E.12 ENERGY LOGGER S0 MODULE 2446170000 D.3 KCMA-28-300-1A-1.5VA-1 2753080000 E.5 PWEB-ES-RT-100/10 2992800000 I.4
CMA-31-500-5A-5VA-0,5 1482070000 E.12 ENERGY METER 520-230 2500880000 B.16 KCMA-28-300-5A-1.5VA-1 2753120000 E.5 PWEB-ES-RT-100/2 2992810000 I.4
CMA-31-500-5A-5VA-1 2420910000 E.12 ENERGY METER 520-230 2500880000 B.19 KCMA-28-400-1A-2.5VA-1 2753090000 E.5 PWEB-ES-RT-100/5 2992820000 I.4
CMA-31-60-5A-1,25VA-1 2421380000 E.12 ENERGY METER 520-24 2500860000 B.16 KCMA-28-400-5A-2.5VA-1 2753130000 E.5 PWEB-ES-RT-1000/10 2992830000 I.4
CMA-31-600-5A-5VA-0,5 2420970000 E.12 ENERGY METER 520-24 2500860000 B.19 KCMA-28-500-1A-1VA-0.5 2753100000 E.5 PWEB-ES-RT-1000/2 2992840000 I.4
CMA-31-600-5A-5VA-1 2420900000 E.12 ENERGY METER 535-230 3008130000 B.16 KCMA-28-500-5A-3VA-1 2753140000 E.5 PWEB-ES-RT-1000/5 2992850000 I.4
CMA-31-75-5A-2,5VA-1 1482040000 E.12 ENERGY METER 535-230 3008130000 B.20 KCMA-32-400-1A-5VA-1 1481990000 E.6 PWEB-ES-RT-2000/10 2992860000 I.4
CMA-31-750-5A-5VA-0,5 1482080000 E.12 ENERGY METER 535-24 3008100000 B.16 KCMA-32-400-5A-5VA-1 2420730000 E.6 PWEB-ES-RT-2000/2 2992870000 I.4
CMA-31-750-5A-5VA-1 2420890000 E.12 ENERGY METER 535-24 3008100000 B.20 KCMA-32-500-5A-5VA-1 2420740000 E.6 PWEB-ES-RT-2000/5 2992880000 I.4
CMA-41-1000-5A-5VA-0,5 2680210000 E.12 ENERGY METER 610-230 2540850000 B.16 KCMA-32-600-1A-5VA-1 1481980000 E.6 PWEB-ES-RT-50/10 2992890000 I.4
CMA-41-1000-5A-5VA-1 2680150000 E.12 ENERGY METER 610-230 2540850000 B.21 KCMA-32-600-5A-5VA-1 2420720000 E.6 PWEB-ES-RT-50/2 2992900000 I.4
CMA-51-1250-5A-5VA-0,5 2680220000 E.12 ENERGY METER 610-24 2540920000 B.16 KCMA-42-1000-1A-2.5VA-0.5 2753220000 E.7 PWEB-ES-RT-50/5 2992910000 I.4
CMA-51-1250-5A-5VA-1 2680160000 E.12 ENERGY METER 610-24 2540920000 B.21 KCMA-42-1000-5A-2.5VA-0.5 2753290000 E.7 PWEB-ES-RT-500/10 2992920000 I.4
CMA-61-1500-5A-5VA-0,5 2680230000 E.12 ENERGY METER 610-PB-230 2540870000 B.16 KCMA-42-250-1A-2.5VA-1 2753150000 E.7 PWEB-ES-RT-500/2 2992930000 I.4
CMA-61-1500-5A-5VA-1 2680170000 E.12 ENERGY METER 610-PB-230 2540870000 B.22 KCMA-42-300-1A-2.5VA-1 2753160000 E.7 PWEB-ES-RT-500/5 2992940000 I.4
CMA-81-2000-5A-10VA-0,5 2680240000 E.12 ENERGY METER 610-PB-24 2540860000 B.16 KCMA-42-300-5A-2.5VA-1 2753230000 E.7 PWEB-ES-RT-5000/10 2875340000 I.4
CMA-81-2000-5A-10VA-1 2680180000 E.12 ENERGY METER 610-PB-24 2540860000 B.22 KCMA-42-400-1A-2.5VA-0.5 2753170000 E.7 PWEB-ES-RT-5000/2 2875320000 I.4
CMA-A20-100-1A-1-2,5VA 3008230000 E.14 ENERGY METER 700-PN-230 2500890000 B.16 KCMA-42-400-5A-5VA-1 2753240000 E.7 PWEB-ES-RT-5000/5 2875330000 I.4
CMA-A20-125-1A-0,5-2,5VA 3008240000 E.14 ENERGY METER 700-PN-230 2500890000 B.23 KCMA-42-500-1A-2.5VA-0.5 2753180000 E.7 PWEB-SCADA-RT-1000/10 2997580000 I.8
CMA-A20-150-1A-0,5-2,5VA 3008250000 E.14 ENERGY METER 700-PN-24 2500870000 B.16 KCMA-42-500-5A-5VA-1 2753250000 E.7 PWEB-SCADA-RT-1000/2 2857480000 I.8
CMA-A20-200-1A-0,5-5VA 3008260000 E.14 ENERGY METER 700-PN-24 2500870000 B.23 KCMA-42-600-1A-2.5VA-0.5 2753190000 E.7 PWEB-SCADA-RT-1000/5 2857520000 I.8
CMA-A20-40-1A-3-1VA 3008140000 E.14 ENERGY METER 750-230 2540910000 B.16 KCMA-42-600-5A-2.5VA-0.5 2753260000 E.7 PWEB-SCADA-RT-10000/10 2857630000 I.8
CMA-A20-50-1A-3-1VA 3008200000 E.14 ENERGY METER 750-230 2540910000 B.24 KCMA-42-750-1A-2.5VA-0.5 2753200000 E.7 PWEB-SCADA-RT-10000/2 2857610000 I.8
CMA-A20-60-1A-1-1VA 3008210000 E.14 ENERGY METER 750-24 2540900000 B.16 KCMA-42-750-5A-2.5VA-0.5 2753270000 E.7 PWEB-SCADA-RT-10000/5 2857620000 I.8
CMA-A20-75-1A-1-1,5VA 3008220000 E.14 ENERGY METER 750-24 2540900000 B.24 KCMA-42-800-1A-2.5VA-0.5 2753210000 E.7 PWEB-SCADA-RT-2000/10 2857560000 I.8
CMA-A30-250-1A-0,5-5VA 3008270000 E.14 ENERGY METER BRACKET B1 2433040000 C.6 KCMA-42-800-5A-2.5VA-0.5 2753280000 E.7 PWEB-SCADA-RT-2000/2 2857540000 I.8
CMA-A30-300-1A-0,5-5VA 3008280000 E.14 ENERGY METER BRACKET B1 2433040000 C.7 KCMA-44-1000-5A-5VA-1 2437400000 E.8 PWEB-SCADA-RT-2000/5 2857550000 I.8
CMA-CTM-7-32-1A-0.2VA-1 2525150000 E.11 ENERGY METER BRACKET L1 2433060000 B.20 KCMA-44-750-5A-5VA-1 2420710000 E.8 PWEB-SCADA-RT-30000/10 2862190000 I.8
CMA-CTM-7-50-1A-0.4VA-1 2556030000 E.11 ENERGY METER BRACKET L1 2433060000 B.21 KCMA-44-800-5A-5VA-1 2437370000 E.8 PWEB-SCADA-RT-30000/2 2862170000 I.8
CMA-CTM-7-64-1A-0.5VA-1 2556010000 E.11 ENERGY METER BRACKET L1 2433060000 B.22 KCMA-8-1000-5A-10VA1 2728130000 E.10 PWEB-SCADA-RT-30000/5 2862180000 I.8
CMA-RCM-DACT-120 2603450000 E.16 ENERGY METER BRACKET L1 2433060000 B.23 KCMA-8-1000-5A-5VA-0.5 2753430000 E.10 PWEB-SCADA-RT-500/10 2857470000 I.8
CMA-RCM-DACT-20 2603420000 E.16 ENERGY METER BRACKET L1 2433060000 B.24 KCMA-8-1200-5A-10VA1 2728140000 E.10 PWEB-SCADA-RT-500/2 2857420000 I.8
CMA-RCM-DACT-35 2603430000 E.16 ENERGY METER BRACKET S2 2433070000 B.19 KCMA-8-1200-5A-5VA-0.5 2753450000 E.10 PWEB-SCADA-RT-500/5 2857430000 I.8
CMA-RCM-DACT-60 2603440000 E.16 ENERGY METER D370-CBM 2540830000 B.16 KCMA-8-1500-5A-15VA1 2728150000 E.10 PWEB-SCADA-RT-5000/10 2857600000 I.8
Customer Specific Training 2938800000 I.4 ENERGY METER D370-CBM 2540830000 B.18 KCMA-8-2000-5A-15VA1 2728160000 E.10 PWEB-SCADA-RT-5000/2 2857570000 I.8
Customer Specific Training 2938800000 I.8 ENERGY METER D650 2425490000 B.16 KCMA-8-250-5A-1.5VA1 2728090000 E.10 PWEB-SCADA-RT-5000/5 2857580000 I.8
ENERGY METER FIXING SET 2433030000 B.19 KCMA-8-2500-5A-15VA1 2728170000 E.10 PWEB-SCADA-RT-60000/10 2862220000 I.8

D ENERGY METER FIXING SET

ENERGY METER FIXING SET
2433030000
2433030000
B.20
B.21
KCMA-8-3000-5A-15VA1
KCMA-8-4000-5A-15VA1
2728180000
2728190000
E.10
E.10
PWEB-SCADA-RT-60000/2
PWEB-SCADA-RT-60000/5
2862200000
2862210000
I.8
I.8
DEK 5/8-11.5 MC NE WS 1341630000 G.9 ENERGY METER FIXING SET 2433030000 B.22 KCMA-8-500-5A-5VA1 2728100000 E.10
DEK 5/8-11.5 MC NE WS
DEK 5/8-11.5 MC NE WS
1341630000
1341630000
G.11
G.15
ENERGY METER FIXING SET
ENERGY METER FIXING SET
2433030000
2433030000
B.23
B.24
KCMA-8-5000-5A-15VA1
KCMA-8-600-5A-2.5VA-0.5
2728210000
2753410000
E.10
E.10 R
DEK 5/8-11.5 MC NE WS 1341630000 G.16 ENERGY METER SEAL L144 2495630000 C.6 KCMA-8-750-5A-2VA1 2728110000 E.10 RCMA-B22-D125-1.5 2593380000 E.22
DEK 5/8-11.5 MC NE WS 1341630000 G.17 ENERGY METER SEAL L144 2495630000 C.7 KCMA-8-800-5A-2.5VA-0.5 2753420000 E.10 RCMA-B22-D125-4.5 2593350000 E.22
DEK 5/8-11.5 MC NE WS 1341630000 G.18 ENERGY METER SEAL L96-2 2495610000 B.19 KCMA-RCM-23D 2656270000 E.18 RCMA-B22-D125-6.0 2831100000 E.22
DEK 5/8-11.5 MC NE WS 1341630000 G.22 ENERGY METER SEAL L96-2 2495610000 B.20 KCMA-RCM-58D 2656280000 E.18 RCMA-B22-D175-1.5 2593390000 E.22
DEK 5/8-11.5 MC NE WS 1341630000 G.23 ENERGY METER SEAL L96-2 2495610000 B.21 KCMA-RCM-812D 2656290000 E.18 RCMA-B22-D175-4.5 2593360000 E.22
DEK 5/8-11.5 MC NE WS 1341630000 G.26 ENERGY METER SEAL L96-2 2495610000 B.22 KOSM BHZ5.00 1483050000 G.15 RCMA-B22-D175-6.0 2831110000 E.22
DEK 5/8-11.5 MC NE WS 1341630000 G.27 ENERGY METER SEAL L96-2 2495610000 B.23 KOSM BHZ5.00 1483050000 G.16 RCMA-B22-D300-6.0 2865880000 E.22
DEK 5/8-11.5 MC SDR 1341610000 G.9 ENERGY METER SEAL L96-2 2495610000 B.24 KOSM BHZ5.00 1483050000 G.17 RCMA-B22-D70-1.5 2593370000 E.22
DEK 5/8-11.5 MC SDR 1341610000 G.11 ESO UR20 DIN A4 WS 1429430000 G.9 KOSM BHZ5.00 1483050000 G.18 RCMA-B22-D70-4.5 2593340000 E.22
DEK 5/8-11.5 MC SDR 1341610000 G.15 ESO UR20 DIN A4 WS 1429430000 G.11 RCMA-B22-D70-6.0 2831090000 E.22
DEK 5/8-11.5 MC SDR 1341610000 G.16 ESO UR20 DIN A4 WS 1429430000 G.15
M RCMC-5000-1A-P 2593400000 E.22

X
DEK 5/8-11.5 MC SDR 1341610000 G.17 ESO UR20 DIN A4 WS 1429430000 G.16 RCMC-5000-AO-P 2593410000 E.22
DEK 5/8-11.5 MC SDR 1341610000 G.18 ESO UR20 DIN A4 WS 1429430000 G.17 MICRO-SD-CARD-16GB 2684400000 G.22 RESMA-100 3036610000 H.11
DEK 5/8-11.5 MC SDR 1341610000 G.22 ESO UR20 DIN A4 WS 1429430000 G.18 MICRO-SD-CARD-16GB 2684400000 G.23 RESMA-100-ENMS 3036750000 H.11
DEK 5/8-11.5 MC SDR 1341610000 G.23 ESO UR20 DIN A4 WS 1429430000 G.22 MICRO-SD-CARD-16GB 2684400000 G.26 RESMA-100-IMPORT 3029480000 H.11
DEK 5/8-11.5 MC SDR 1341610000 G.26 ESO UR20 DIN A4 WS 1429430000 G.23 MICRO-SD-CARD-16GB 2684400000 G.27 RESMA-100-PROD 3036670000 H.11
DEK 5/8-11.5 MC SDR 1341610000 G.27 ESO UR20 DIN A4 WS 1429430000 G.26 RESMA-100-RECIPE 3029540000 H.11

X.2 3043800000
Type Order No. Page Type Order No. Page Type Order No. Page

RESMA-100-REGRESSION 3118180000 H.11 U-OS-PWEB-ES-RT-1000/2 2941980000 I.4 US67-VIB40C-ANA-B0160000B00000 3094880000 F.21

RESMA-1000 3036640000 H.11 U-OS-PWEB-ES-RT-1000/5 2941990000 I.4 US67-VIB40C-ANA-C0160000B00000 3095030000 F.22
RESMA-1000-ENMS 3036780000 H.11 U-OS-PWEB-ES-RT-10000/2 2942040000 I.4 US67-VIB42C-ANA-00160000B00000 3095040000 F.22
RESMA-1000-IMPORT 3029510000 H.11 U-OS-PWEB-ES-RT-10000/5 2942050000 I.4 US67-VIB44C-ANA-0A080000B00000 3095050000 F.23
RESMA-1000-PROD 3118160000 H.11 U-OS-PWEB-ES-RT-2000/2 2942000000 I.4 US67-VIB46C-ANA-00160003B00000 3095130000 F.23
RESMA-1000-RECIPE 3029570000 H.11 U-OS-PWEB-ES-RT-2000/5 2942010000 I.4 US67-VIB60C-ANA-0016B000C00000 3095140000 F.25
RESMA-1000-REGRESSION 3029630000 H.11 U-OS-PWEB-ES-RT-250/1_FREE 2987740000 I.4 US67-VIB60C-ANA-0016B003C00000 3095430000 F.27
RESMA-10000 3036660000 H.11 U-OS-PWEB-ES-RT-250/2 3038630000 I.4 US67-VIB60C-ANA-0016BA00C00000 3095420000 F.27

Index / Type
RESMA-10000--REZEPTUR 3118170000 H.11 U-OS-PWEB-ES-RT-500/2 2941960000 I.4 US67-VIB60C-ANA-0032B000C00000 3095410000 F.26
RESMA-10000-ENMS 3036800000 H.11 U-OS-PWEB-ES-RT-500/5 2941970000 I.4 US67-VIB60C-ANA-D016B000CB0000 3095160000 F.25
RESMA-10000-IMPORT 3029530000 H.11 U-OS-PWEB-ES-RT-5000/2 2942020000 I.4 US67-VIB60C-ANA-E016B000C00000 3095190000 F.26
RESMA-10000-PROD 3036710000 H.11 U-OS-PWEB-ES-RT-5000/5 2942030000 I.4 US67-VIB62C-ANA-0A08B000C00000 3095440000 F.28
RESMA-10000-REGRESSION 3029650000 H.11 UC20-M3000 2839150000 G.22
RESMA-200 3036620000 H.11 UC20-M4000 2839160000 G.23
RESMA-200-ENMS 3036760000 H.11 UC20-PK-2839150000-SP 2884000000 G.22
RESMA-200-IMPORT 3029490000 H.11 UC20-PK-2839160000-SP 2883990000 G.23
RESMA-200-PROD 3036690000 H.11 UC20-PK-2928020000-SP 2742900000 G.27
RESMA-200-RECIPE 3029550000 H.11 UC20-WL2000-AC 1334950000 G.26
RESMA-200-REGRESSION 3029610000 H.11 UC20-WL2000-AC-CAN 2928020000 G.27
RESMA-3000 3036650000 H.11 UR20-3EM-400V-AC-333MV 2920860000 G.18
RESMA-3000-ENMS 3036790000 H.11 UR20-3EM-400V-AC-CT1A 2920830000 G.15
RESMA-3000-IMPORT 3029520000 H.11 UR20-3EM-400V-AC-CT5A 2920840000 G.16
RESMA-3000-PROD 3036720000 H.11 UR20-3EM-400V-AC-RC 2920850000 G.17
RESMA-3000-RECIPE 3029580000 H.11 UR20-BM-SP 1350930000 G.15
RESMA-3000-REGRESSION 3029640000 H.11 UR20-BM-SP 1350930000 G.16
RESMA-500 3036630000 H.11 UR20-BM-SP 1350930000 G.17
RESMA-500-ENMS 3036770000 H.11 UR20-BM-SP 1350930000 G.18
RESMA-500-IMPORT 3029500000 H.11 UR20-EBK-ACC 1346610000 G.9
RESMA-500-PROD 3036700000 H.11 UR20-EBK-ACC 1346610000 G.11
RESMA-500-RECIPE 3029560000 H.11 UR20-EBK-ACC 1346610000 G.15
RESMA-500-REGRESSION 3029620000 H.11 UR20-EBK-ACC 1346610000 G.16
RESMA-MODBUS-CONNECTOR 2854870000 H.11 UR20-EBK-ACC 1346610000 G.17
RESMA-PLC-CONNECTOR 2854120000 H.11 UR20-EBK-ACC 1346610000 G.18
UR20-EM-2920830000-SP 3052120000 G.15

S UR20-EM-2920840000-SP
UR20-EM-2920850000-SP
3052130000
3052140000
G.16
G.17
SAIL-M12BG-4S1.5U 1812540150 F.31 UR20-EM-2920860000-SP 3052200000 G.18
SAIL-M12BG-4S10U 1812541000 F.31 UR20-FBC-MOD-TCP-ECO 2659700000 G.11
SAIL-M12BG-4S5.0U 1812540500 F.31 UR20-FBC-MOD-TCP-V2 2476450000 G.9
SAIL-M12BG-4SA2.0U 3107900200 F.31 UR20-PK-1334950000-SP 2605360000 G.26
SAIL-M12BG-4SA5.0U 3107900500 F.31 UR20-PK-2476450000-SP 2485280000 G.9
SAIL-M12BG-4SD10UBL 3106101000 F.31 UR20-PK-2659700000-SP 2702610000 G.11
SAIL-M12BG-4SD5.0UBL 3106100500 F.31 UR20-PK-2920830000-SP 3052170000 G.15
SAIL-M12BG-8S15U 1890521500 F.31 UR20-PK-2920840000-SP 3052180000 G.16
SAIL-M12BG-8S5.0U 1890520500 F.31 UR20-PK-2920850000-SP 3052190000 G.17
SAIL-M12GM12G-4S1.5U 1058500150 F.31 UR20-PK-2920860000-SP 3052210000 G.18
SAIL-M12GM12G-4S10U 1058501000 F.31 UR20-SM-ACC 1339920000 G.9
SAIL-M12GM12G-4S5.0U 1058500500 F.31 UR20-SM-ACC 1339920000 G.11
SLA Technical Support (PWEB/ResMa) 2938730000 H.11 UR20-SM-ACC 1339920000 G.15
SLA Technical Support (PWEB/ResMa) 2938730000 I.4 UR20-SM-ACC 1339920000 G.16
SLA Technical Support (PWEB/ResMa) 2938730000 I.8 UR20-SM-ACC 1339920000 G.17
SLA Technical Support (PWEB/ResMa) 2938730000 I.10 UR20-SM-ACC 1339920000 G.18
SLA Update (ResMa) 3107540000 H.11 UR20-SM-ACC 1339920000 G.22
UR20-SM-ACC 1339920000 G.23

T UR20-SM-ACC
UR20-SM-ACC
1339920000
1339920000
G.26
G.27
THM UR20 GE 1429910000 G.9 US67-BAT-COSL 2757620000 F.31
THM UR20 GE 1429910000 G.11 US67-CON-VIB4X-01500 3074700000 F.31
THM UR20 GE 1429910000 G.15 US67-CON-VIB4X-04500 3074720000 F.31
THM UR20 GE 1429910000 G.16 US67-CON-VIB4X-09500 3074730000 F.31
THM UR20 GE 1429910000 G.17 US67-CON-VIB6X-01500 3074740000 F.31
THM UR20 GE 1429910000 G.18 US67-CON-VIB6X-04500 3074750000 F.31
THM UR20 GE 1429910000 G.22 US67-CON-VIB6X-09500 3074760000 F.31
THM UR20 GE 1429910000 G.23 US67-MNT-00M08-000M8 -CON 3069470000 F.31
THM UR20 GE 1429910000 G.26 US67-MNT-00M08-003/8-000 3073540000 F.31
THM UR20 GE 1429910000 G.27 US67-MNT-00M08-00M06-000 3069360000 F.31
THM UR20 WS 1429420000 G.9 US67-MNT-00M08-00M10-S24 3073200000 F.31
THM UR20 WS 1429420000 G.11 US67-MNT-00M08-00M10-S30 3072980000 F.31
THM UR20 WS 1429420000 G.15 US67-MNT-00M08-00M12-S24 3073300000 F.31
THM UR20 WS 1429420000 G.16 US67-MNT-00M08-00M12-S30 3073210000 F.31
THM UR20 WS 1429420000 G.17 US67-MNT-00M08-00M16-000 3073330000 F.31
THM UR20 WS 1429420000 G.18 US67-MNT-00M08-00M20-000 3073360000 F.31
THM UR20 WS 1429420000 G.22 US67-MNT-00M08-00M24-000 3073370000 F.31
THM UR20 WS 1429420000 G.23 US67-MNT-00M08-00M30-000 3073380000 F.31
THM UR20 WS 1429420000 G.26 US67-MNT-00M08-01/2B-000 3073690000 F.31
THM UR20 WS 1429420000 G.27 US67-MNT-00M08-01/4N-000 3073570000 F.31
US67-MNT-00M08-01/4U-000 3073550000 F.31

U US67-MNT-00M08-0GLUE-000
US67-MNT-00M08-0MAG1-000
3073700000
3073740000
F.31
F.31
U-OS-CODESYS-BASIC-L 2924030000 I.15 US67-MNT-00M08-0MAG2-000 3073750000 F.31
U-OS-CODESYS-BASIC-M 2924020000 I.15 US67-PLATE64-STD 2811910000 F.31
U-OS-CODESYS-BASIC-S 2924000000 I.15 US67-SLV-VIB2X 3074630000 F.31
U-OS-CODESYS-Communication M 2984440000 I.15 US67-SLV-VIB4X 3074640000 F.31
U-OS-CODESYS-Communication XXL 2924130000 I.15 US67-SLV-VIB6X 3074650000 F.31
U-OS-CODESYS-OPC-UA-XL 3012600000 I.15 US67-USB-STICK-BLE 2874720000 F.31
U-OS-CODESYS-PERFORMANCE-L 2924080000 I.15 US67-V1T-BLE 2751260000 F.7
U-OS-CODESYS-PERFORMANCE-M 2924070000 I.15 US67-VIB20C-ANA-00160000A00000 3094340000 F.13
U-OS-CODESYS-REDUNDANCY 2924090000 I.15 US67-VIB20C-ANA-00160A00A00000 3094370000 F.14
U-OS-CODESYS-STANDARD-L 2924060000 I.15 US67-VIB20C-ANA-0016A000A00000 3094360000 F.14
U-OS-CODESYS-STANDARD-M 2924050000 I.15 US67-VIB20C-ANA-00320000A00000 3094350000 F.13
U-OS-CODESYS-STANDARD-S 2924040000 I.15 US67-VIB22C-IOL-0UNI0001A00000 3094380000 F.15
U-OS-CODESYS-VISU-L 2924110000 I.15 US67-VIB22C-IOL-0UNI0A01A00000 3094630000 F.15
U-OS-CODESYS-VISU-M 2924100000 I.15 US67-VIB24C-IOL-0UNI0002A00000 3094640000 F.16

X
U-OS-CODESYS-VISU-XL 2924120000 I.15 US67-VIB24C-IOL-0UNI0A02A00000 3094650000 F.16
U-OS-CODESYS-VISU-XXL 3012570000 I.15 US67-VIB40C-ANA-00160000B00000 3094660000 F.19
U-OS-EML-RT-L 3036840000 I.14 US67-VIB40C-ANA-00160003B00000 3094750000 F.19
U-OS-EML-RT-M 3036830000 I.14 US67-VIB40C-ANA-00160A00B00000 3094790000 F.20
U-OS-EML-RT-S 3036820000 I.14 US67-VIB40C-ANA-00320000B00000 3094960000 F.21
U-OS-EML-RT-Trial 3100520000 I.14 US67-VIB40C-ANA-A0160000BB0000 3094870000 F.20

3043800000 X.3
 Order No. Type Page Order No. Type Page Order No. Type Page Order No. Type Page

1050000000 1429430000
1429430000
ESO UR20 DIN A4 WS
ESO UR20 DIN A4 WS
G.26
G.27 2470000000 2680190000
2680200000
CMA-101-2500-5A-10VA-1
CMA-31-125-5A-2,5VA-0,5
E.12
E.12
1058500150 SAIL-M12GM12G-4S1.5U F.31 1429910000 THM UR20 GE G.9 2476450000 UR20-FBC-MOD-TCP-V2 G.9 2680210000 CMA-41-1000-5A-5VA-0,5 E.12
1058500500 SAIL-M12GM12G-4S5.0U F.31 1429910000 THM UR20 GE G.11 2680220000 CMA-51-1250-5A-5VA-0,5 E.12
1058501000 SAIL-M12GM12G-4S10U F.31 1429910000
1429910000
THM UR20 GE
THM UR20 GE
G.15
G.16 2480000000 2680230000
2680240000
CMA-61-1500-5A-5VA-0,5
CMA-81-2000-5A-10VA-0,5
E.12
E.12

1320000000
Index / Order No.

1429910000 THM UR20 GE G.17 2485280000 UR20-PK-2476450000-SP G.9 2680250000 CMA-101-2500-5A-10VA-0,5 E.12
1429910000 THM UR20 GE G.18 2489780000 ENERGY ANALYSER D550-24 C.4 2682620000 IOT-GW30 G.30
1323700000 PM 2.7/2.6 MC SDR G.9 1429910000 THM UR20 GE G.22 2489780000 ENERGY ANALYSER D550-24 C.5 2682630000 IOT-GW30-4G-EU G.31
1323700000 PM 2.7/2.6 MC SDR G.11 1429910000 THM UR20 GE G.23 2682640000 IOT-GW30-4G-NA G.31
1323700000
1323700000
PM 2.7/2.6 MC SDR
PM 2.7/2.6 MC SDR
G.15
G.16
1429910000
1429910000
THM UR20 GE
THM UR20 GE
G.26
G.27 2490000000 2684400000
2684400000
MICRO-SD-CARD-16GB
MICRO-SD-CARD-16GB
G.22
G.23
1323700000 PM 2.7/2.6 MC SDR G.17 2495610000 ENERGY METER SEAL L96-2 B.19 2684400000 MICRO-SD-CARD-16GB G.26
1323700000
1323700000
PM 2.7/2.6 MC SDR
PM 2.7/2.6 MC SDR
G.18
G.22 1480000000 2495610000
2495610000
ENERGY METER SEAL L96-2
ENERGY METER SEAL L96-2
B.20
B.21
2684400000
2684410000
MICRO-SD-CARD-16GB
BATTERY-CR1220-3V
G.27
G.26
1323700000 PM 2.7/2.6 MC SDR G.23 1481980000 KCMA-32-600-1A-5VA-1 E.6 2495610000 ENERGY METER SEAL L96-2 B.22 2684410000 BATTERY-CR1220-3V G.27
1323700000 PM 2.7/2.6 MC SDR G.26 1481990000 KCMA-32-400-1A-5VA-1 E.6 2495610000 ENERGY METER SEAL L96-2 B.23
1323700000
1323710000
PM 2.7/2.6 MC SDR
PM 2.7/2.6 MC NE WS
G.27
G.9
1482000000
1482010000
KCMA-18-250-1A-1,5VA-1
KCMA-18-100-1A-1,25VA-3
E.4
E.4
2495610000
2495630000
ENERGY METER SEAL L96-2
ENERGY METER SEAL L144
B.24
C.6 2700000000
1323710000 PM 2.7/2.6 MC NE WS G.11 1482020000 KCMA-18-50-1A-1VA-3 E.4 2495630000 ENERGY METER SEAL L144 C.7 2702610000 UR20-PK-2659700000-SP G.11
1323710000 PM 2.7/2.6 MC NE WS G.15 1482030000 CMA-31-100-5A-2,5VA-1 E.12
1323710000
1323710000
PM 2.7/2.6 MC NE WS
PM 2.7/2.6 MC NE WS
G.16
G.17
1482040000
1482050000
CMA-31-75-5A-2,5VA-1
CMA-31-250-5A-5VA-0,5
E.12
E.12 2500000000 2720000000
1323710000 PM 2.7/2.6 MC NE WS G.18 1482070000 CMA-31-500-5A-5VA-0,5 E.12 2500860000 ENERGY METER 520-24 B.16 2728090000 KCMA-8-250-5A-1.5VA1 E.10
1323710000 PM 2.7/2.6 MC NE WS G.22 1482080000 CMA-31-750-5A-5VA-0,5 E.12 2500860000 ENERGY METER 520-24 B.19 2728100000 KCMA-8-500-5A-5VA1 E.10
1323710000 PM 2.7/2.6 MC NE WS G.23 1483050000 KOSM BHZ5.00 G.15 2500870000 ENERGY METER 700-PN-24 B.16 2728110000 KCMA-8-750-5A-2VA1 E.10
1323710000 PM 2.7/2.6 MC NE WS G.26 1483050000 KOSM BHZ5.00 G.16 2500870000 ENERGY METER 700-PN-24 B.23 2728130000 KCMA-8-1000-5A-10VA1 E.10
1323710000 PM 2.7/2.6 MC NE WS G.27 1483050000 KOSM BHZ5.00 G.17 2500880000 ENERGY METER 520-230 B.16 2728140000 KCMA-8-1200-5A-10VA1 E.10
1483050000 KOSM BHZ5.00 G.18 2500880000 ENERGY METER 520-230 B.19 2728150000 KCMA-8-1500-5A-15VA1 E.10

1330000000 1487980000
1487980000
IE-USB-A-MICRO-1.8M
IE-USB-A-MICRO-1.8M
G.9
G.22
2500890000
2500890000
ENERGY METER 700-PN-230
ENERGY METER 700-PN-230
B.16
B.23
2728160000
2728170000
KCMA-8-2000-5A-15VA1
KCMA-8-2500-5A-15VA1
E.10
E.10
1334950000 UC20-WL2000-AC G.26 1487980000 IE-USB-A-MICRO-1.8M G.23 2728180000 KCMA-8-3000-5A-15VA1 E.10
1339920000
1339920000
UR20-SM-ACC
UR20-SM-ACC
G.9
G.11
1487980000
1487980000
IE-USB-A-MICRO-1.8M
IE-USB-A-MICRO-1.8M
G.26
G.27 2520000000 2728190000
2728210000
KCMA-8-4000-5A-15VA1
KCMA-8-5000-5A-15VA1
E.10
E.10
1339920000 UR20-SM-ACC G.15 2525150000 CMA-CTM-7-32-1A-0.2VA-1 E.11
1339920000 UR20-SM-ACC G.16
1810000000 2740000000
1339920000
1339920000
UR20-SM-ACC
UR20-SM-ACC
G.17
G.18 1812540150 SAIL-M12BG-4S1.5U F.31 2530000000 2742900000 UC20-PK-2928020000-SP G.27
1339920000 UR20-SM-ACC G.22 1812540500 SAIL-M12BG-4S5.0U F.31 2534130000 ENERGY ANALYSER 750-230 C.4
1339920000
1339920000
UR20-SM-ACC
UR20-SM-ACC
G.23
G.26
1812541000 SAIL-M12BG-4S10U F.31 2534130000
2534160000
ENERGY ANALYSER 750-230
ENERGY ANALYSER 750-24
C.7
C.4 2750000000
1339920000 UR20-SM-ACC G.27
1890000000 2534160000 ENERGY ANALYSER 750-24 C.7 2751260000
2752980000
US67-V1T-BLE
KCMA-18-125-1A-1,5VA-3
F.7
E.4

1340000000 1890520500
1890521500
SAIL-M12BG-8S5.0U
SAIL-M12BG-8S15U
F.31
F.31 2540000000 2752990000
2753000000
KCMA-18-100-1A-0.3VA-1
KCMA-18-125-1A-0.5VA-1
E.4
E.4
1341610000 DEK 5/8-11.5 MC SDR G.9 2540830000 ENERGY METER D370-CBM B.16 2753010000 KCMA-18-150-1A-1VA-1 E.4
1341610000
1341610000
DEK 5/8-11.5 MC SDR
DEK 5/8-11.5 MC SDR
G.11
G.15 2420000000 2540830000
2540850000
ENERGY METER D370-CBM
ENERGY METER 610-230
B.18
B.16
2753020000
2753030000
KCMA-18-200-1A-1.5VA-1
KCMA-18-150-5A-1VA-1
E.4
E.4
1341610000 DEK 5/8-11.5 MC SDR G.16 2420710000 KCMA-44-750-5A-5VA-1 E.8 2540850000 ENERGY METER 610-230 B.21 2753040000 KCMA-18-200-5A-1,5VA-1 E.4
1341610000 DEK 5/8-11.5 MC SDR G.17 2420720000 KCMA-32-600-5A-5VA-1 E.6 2540860000 ENERGY METER 610-PB-24 B.16 2753050000 KCMA-18-250-5A-1VA-0.5 E.4
1341610000 DEK 5/8-11.5 MC SDR G.18 2420730000 KCMA-32-400-5A-5VA-1 E.6 2540860000 ENERGY METER 610-PB-24 B.22 2753060000 KCMA-28-200-1A-0.3VA-1 E.5
1341610000 DEK 5/8-11.5 MC SDR G.22 2420740000 KCMA-32-500-5A-5VA-1 E.6 2540870000 ENERGY METER 610-PB-230 B.16 2753070000 KCMA-28-250-1A-1VA-1 E.5
1341610000 DEK 5/8-11.5 MC SDR G.23 2420750000 KCMA-18-250-1A-4VA-3 E.4 2540870000 ENERGY METER 610-PB-230 B.22 2753080000 KCMA-28-300-1A-1.5VA-1 E.5
1341610000 DEK 5/8-11.5 MC SDR G.26 2420760000 KCMA-18-200-1A-3VA-3 E.4 2540900000 ENERGY METER 750-24 B.16 2753090000 KCMA-28-400-1A-2.5VA-1 E.5
1341610000 DEK 5/8-11.5 MC SDR G.27 2420770000 KCMA-18-150-1A-2VA-3 E.4 2540900000 ENERGY METER 750-24 B.24 2753100000 KCMA-28-500-1A-1VA-0.5 E.5
1341630000 DEK 5/8-11.5 MC NE WS G.9 2420780000 KCMA-18-75-1A-1VA-3 E.4 2540910000 ENERGY METER 750-230 B.16 2753110000 KCMA-28-250-5A-1VA-1 E.5
1341630000 DEK 5/8-11.5 MC NE WS G.11 2420890000 CMA-31-750-5A-5VA-1 E.12 2540910000 ENERGY METER 750-230 B.24 2753120000 KCMA-28-300-5A-1.5VA-1 E.5
1341630000 DEK 5/8-11.5 MC NE WS G.15 2420900000 CMA-31-600-5A-5VA-1 E.12 2540920000 ENERGY METER 610-24 B.16 2753130000 KCMA-28-400-5A-2.5VA-1 E.5
1341630000 DEK 5/8-11.5 MC NE WS G.16 2420910000 CMA-31-500-5A-5VA-1 E.12 2540920000 ENERGY METER 610-24 B.21 2753140000 KCMA-28-500-5A-3VA-1 E.5
1341630000 DEK 5/8-11.5 MC NE WS G.17 2420920000 CMA-31-400-5A-5VA-1 E.12 2753150000 KCMA-42-250-1A-2.5VA-1 E.7
1341630000
1341630000
DEK 5/8-11.5 MC NE WS
DEK 5/8-11.5 MC NE WS
G.18
G.22
2420940000
2420950000
CMA-31-250-5A-5VA-1
CMA-31-200-5A-5VA-1
E.12
E.12 2550000000 2753160000
2753170000
KCMA-42-300-1A-2.5VA-1
KCMA-42-400-1A-2.5VA-0.5
E.7
E.7
1341630000 DEK 5/8-11.5 MC NE WS G.23 2420960000 CMA-31-150-5A-5VA-1 E.12 2556010000 CMA-CTM-7-64-1A-0.5VA-1 E.11 2753180000 KCMA-42-500-1A-2.5VA-0.5 E.7
1341630000 DEK 5/8-11.5 MC NE WS G.26 2420970000 CMA-31-600-5A-5VA-0,5 E.12 2556030000 CMA-CTM-7-50-1A-0.4VA-1 E.11 2753190000 KCMA-42-600-1A-2.5VA-0.5 E.7
1341630000 DEK 5/8-11.5 MC NE WS G.27 2420980000 CMA-31-400-5A-5VA-0,5 E.12 2753200000 KCMA-42-750-1A-2.5VA-0.5 E.7
1346610000
1346610000
UR20-EBK-ACC
UR20-EBK-ACC
G.9
G.11
2420990000
2421020000
CMA-31-300-5A-5VA-0,5
CMA-31-200-5A-2,5VA-0,5
E.12
E.12 2590000000 2753210000
2753220000
KCMA-42-800-1A-2.5VA-0.5
KCMA-42-1000-1A-2.5VA-0.5
E.7
E.7
1346610000 UR20-EBK-ACC G.15 2421030000 CMA-31-150-5A-2,5VA-0,5 E.12 2593340000 RCMA-B22-D70-4.5 E.22 2753230000 KCMA-42-300-5A-2.5VA-1 E.7
1346610000 UR20-EBK-ACC G.16 2421380000 CMA-31-60-5A-1,25VA-1 E.12 2593350000 RCMA-B22-D125-4.5 E.22 2753240000 KCMA-42-400-5A-5VA-1 E.7
1346610000 UR20-EBK-ACC G.17 2425490000 ENERGY METER D650 B.16 2593360000 RCMA-B22-D175-4.5 E.22 2753250000 KCMA-42-500-5A-5VA-1 E.7
1346610000 UR20-EBK-ACC G.18 2425500000 ENERGY ANALYSER 550 C.4 2593370000 RCMA-B22-D70-1.5 E.22 2753260000 KCMA-42-600-5A-2.5VA-0.5 E.7
2425500000 ENERGY ANALYSER 550 C.6 2593380000 RCMA-B22-D125-1.5 E.22 2753270000 KCMA-42-750-5A-2.5VA-0.5 E.7

1350000000 2425510000
2425510000
ENERGY ANALYSER D550
ENERGY ANALYSER D550
C.4
C.5
2593390000
2593400000
RCMA-B22-D175-1.5
RCMC-5000-1A-P
E.22
E.22
2753280000
2753290000
KCMA-42-800-5A-2.5VA-0.5
KCMA-42-1000-5A-2.5VA-0.5
E.7
E.7
1350930000 UR20-BM-SP G.15 2425520000 ENERGY LOGGER D550 D.3 2593410000 RCMC-5000-AO-P E.22 2753360000 KCMA 5-250-5A-1.5VA-1 E.9
1350930000 UR20-BM-SP G.16 2753370000 KCMA 5-400-5A-1VA-0.5 E.9
1350930000
1350930000
UR20-BM-SP
UR20-BM-SP
G.17
G.18 2430000000 2600000000 2753380000
2753390000
KCMA 5-500-5A-2.5VA-0.5
KCMA 5-600-5A-2.5VA-0.5
E.9
E.9
2433030000 ENERGY METER FIXING SET B.19 2602580000 ENERGY ANALYSER 550-24 C.4 2753400000 KCMA 5-1000-5A-5VA-0.5 E.9

1420000000 2433030000
2433030000
ENERGY METER FIXING SET
ENERGY METER FIXING SET
B.20
B.21
2602580000
2603420000
ENERGY ANALYSER 550-24
CMA-RCM-DACT-20
C.6
E.16
2753410000
2753420000
KCMA-8-600-5A-2.5VA-0.5
KCMA-8-800-5A-2.5VA-0.5
E.10
E.10
1429420000 THM UR20 WS G.9 2433030000 ENERGY METER FIXING SET B.22 2603430000 CMA-RCM-DACT-35 E.16 2753430000 KCMA-8-1000-5A-5VA-0.5 E.10
1429420000 THM UR20 WS G.11 2433030000 ENERGY METER FIXING SET B.23 2603440000 CMA-RCM-DACT-60 E.16 2753450000 KCMA-8-1200-5A-5VA-0.5 E.10
1429420000 THM UR20 WS G.15 2433030000 ENERGY METER FIXING SET B.24 2603450000 CMA-RCM-DACT-120 E.16 2757620000 US67-BAT-COSL F.31
1429420000 THM UR20 WS G.16 2433040000 ENERGY METER BRACKET B1 C.6 2605360000 UR20-PK-1334950000-SP G.26
1429420000 THM UR20 WS G.17 2433040000 ENERGY METER BRACKET B1 C.7
2810000000
1429420000
1429420000
THM UR20 WS
THM UR20 WS
G.18
G.22
2433060000
2433060000
ENERGY METER BRACKET L1
ENERGY METER BRACKET L1
B.20
B.21 2650000000 2811910000 US67-PLATE64-STD F.31
1429420000 THM UR20 WS G.23 2433060000 ENERGY METER BRACKET L1 B.22 2656270000 KCMA-RCM-23D E.18 2819870000 AML-MB-MA-AZ-03 I.10
1429420000 THM UR20 WS G.26 2433060000 ENERGY METER BRACKET L1 B.23 2656280000 KCMA-RCM-58D E.18
1429420000
1429430000
THM UR20 WS
ESO UR20 DIN A4 WS
G.27
G.9
2433060000
2433070000
ENERGY METER BRACKET L1
ENERGY METER BRACKET S2
B.24
B.19
2656290000
2659700000
KCMA-RCM-812D
UR20-FBC-MOD-TCP-ECO
E.18
G.11 2830000000
1429430000 ESO UR20 DIN A4 WS G.11 2437370000 KCMA-44-800-5A-5VA-1 E.8 2831090000 RCMA-B22-D70-6.0 E.22

X 2680000000
1429430000 ESO UR20 DIN A4 WS G.15 2437400000 KCMA-44-1000-5A-5VA-1 E.8 2831100000 RCMA-B22-D125-6.0 E.22
1429430000 ESO UR20 DIN A4 WS G.16 2831110000 RCMA-B22-D175-6.0 E.22
1429430000
1429430000
ESO UR20 DIN A4 WS
ESO UR20 DIN A4 WS
G.17
G.18 2440000000 2680150000
2680160000
CMA-41-1000-5A-5VA-1
CMA-51-1250-5A-5VA-1
E.12
E.12
2839150000
2839160000
UC20-M3000
UC20-M4000
G.22
G.23
1429430000 ESO UR20 DIN A4 WS G.22 2446170000 ENERGY LOGGER S0 MODULE D.3 2680170000 CMA-61-1500-5A-5VA-1 E.12
1429430000 ESO UR20 DIN A4 WS G.23 2680180000 CMA-81-2000-5A-10VA-1 E.12

X.4 3043800000
Order No. Type Page Order No. Type Page Order No. Type Page Order No. Type Page

2850000000 2941980000
2941990000
U-OS-PWEB-ES-RT-1000/2
U-OS-PWEB-ES-RT-1000/5
I.4
I.4
3036790000
3036800000
RESMA-3000-ENMS
RESMA-10000-ENMS
H.11
H.11 3100000000
2854120000 RESMA-PLC-CONNECTOR H.11 2942000000 U-OS-PWEB-ES-RT-2000/2 I.4 3036820000 U-OS-EML-RT-S I.14 3100520000 U-OS-EML-RT-Trial I.14
2854870000 RESMA-MODBUS-CONNECTOR H.11 2942010000 U-OS-PWEB-ES-RT-2000/5 I.4 3036830000 U-OS-EML-RT-M I.14 3106100500 SAIL-M12BG-4SD5.0UBL F.31
2857420000 PWEB-SCADA-RT-500/2 I.8 2942020000 U-OS-PWEB-ES-RT-5000/2 I.4 3036840000 U-OS-EML-RT-L I.14 3106101000 SAIL-M12BG-4SD10UBL F.31
2857430000 PWEB-SCADA-RT-500/5 I.8 2942030000 U-OS-PWEB-ES-RT-5000/5 I.4 3037000000 EML-RT-Trial I.14 3107540000 SLA Update (ResMa) H.11

Index / Order No.

2857470000 PWEB-SCADA-RT-500/10 I.8 2942040000 U-OS-PWEB-ES-RT-10000/2 I.4 3037270000 PWEB-ES-DESIGNER-2000_FREE I.4 3107900200 SAIL-M12BG-4SA2.0U F.31
2857480000 PWEB-SCADA-RT-1000/2 I.8 2942050000 U-OS-PWEB-ES-RT-10000/5 I.4 3037270000 PWEB-ES-DESIGNER-2000_FREE I.8 3107900500 SAIL-M12BG-4SA5.0U F.31
2857520000 PWEB-SCADA-RT-1000/5 I.8 3037270000 PWEB-ES-DESIGNER-2000_FREE I.4
2857540000
2857550000
PWEB-SCADA-RT-2000/2
PWEB-SCADA-RT-2000/5
I.8
I.8 2970000000 3038630000 U-OS-PWEB-ES-RT-250/2 I.4
3110000000
2857560000
2857570000
PWEB-SCADA-RT-2000/10
PWEB-SCADA-RT-5000/2
I.8
I.8
2976350000
2976360000
AML-MR-EC-TRIAL-3M
AML-MR-EC-1Y-S
I.10
I.10 3050000000 3118160000
3118170000
RESMA-1000-PROD
RESMA-10000--REZEPTUR
H.11
H.11
2857580000 PWEB-SCADA-RT-5000/5 I.8 2976370000 AML-MR-EC-1Y-M I.10 3052120000 UR20-EM-2920830000-SP G.15 3118180000 RESMA-100-REGRESSION H.11
2857600000 PWEB-SCADA-RT-5000/10 I.8 2976380000 AML-MR-EC-1Y-L I.10 3052130000 UR20-EM-2920840000-SP G.16
2857610000
2857620000
PWEB-SCADA-RT-10000/2
PWEB-SCADA-RT-10000/5
I.8
I.8
2980000000
3052140000
3052170000
UR20-EM-2920850000-SP
UR20-PK-2920830000-SP
G.17
G.15 7760000000
2857630000 PWEB-SCADA-RT-10000/10 I.8 3052180000 UR20-PK-2920840000-SP G.16 7760051001 EM111-RTU-2P B.6
2857650000 PWEB-DESIGNER-PRO I.4 2984440000 U-OS-CODESYS-Communication M I.15 3052190000 UR20-PK-2920850000-SP G.17 7760051001 EM111-RTU-2P B.8
2857650000 PWEB-DESIGNER-PRO I.8 2987740000 U-OS-PWEB-ES-RT-250/1_FREE I.4 3052200000 UR20-EM-2920860000-SP G.18 7760051002 EM110-RTU-2P B.6
3052210000 UR20-PK-2920860000-SP G.18 7760051002 EM110-RTU-2P B.8

2860000000 2990000000 3053900000

3053910000
P-CON RUN
P-CON DRV CODESYS
H.13
H.13
7760051003
7760051003
EM122-RTU-2P
EM122-RTU-2P
B.6
B.9
2862170000 PWEB-SCADA-RT-30000/2 I.8 2992800000 PWEB-ES-RT-100/10 I.4 3053920000 P-CON DRV ALLENBRADLEY H.13 7760051004 EM120-RTU-2P B.6
2862180000 PWEB-SCADA-RT-30000/5 I.8 2992810000 PWEB-ES-RT-100/2 I.4 3053930000 P-CON COM 50 H.13 7760051004 EM120-RTU-2P B.9
2862190000 PWEB-SCADA-RT-30000/10 I.8 2992820000 PWEB-ES-RT-100/5 I.4 3053940000 P-CON COM 100 H.13 7760051005 EM220-RTU-4DI2DO B.6
2862200000 PWEB-SCADA-RT-60000/2 I.8 2992830000 PWEB-ES-RT-1000/10 I.4 3053950000 P-CON COM 250 H.13 7760051005 EM220-RTU-4DI2DO B.10
2862210000 PWEB-SCADA-RT-60000/5 I.8 2992840000 PWEB-ES-RT-1000/2 I.4 3053960000 P-CON COM 500 H.13 7760051006 EM220-RTU-4DI2DO-GW B.6
2862220000 PWEB-SCADA-RT-60000/10 I.8 2992850000 PWEB-ES-RT-1000/5 I.4 3053970000 P-CON COM 1000 H.13 7760051006 EM220-RTU-4DI2DO-GW B.10
2864180000 AML-MB-EC-TRIAL-3M I.10 2992860000 PWEB-ES-RT-2000/10 I.4 3053980000 P-CON COM 2500 H.13
2864190000
2865880000
AML-MB-EC-1Y
RCMA-B22-D300-6.0
I.10
E.22
2992870000
2992880000
PWEB-ES-RT-2000/2
PWEB-ES-RT-2000/5
I.4
I.4
3053990000
3054000000
P-CON COM 5000
P-CON COM 10000
H.13
H.13 8000000000
2992890000 PWEB-ES-RT-50/10 I.4 8000100996 EM CONNECTOR CURRENT ATTB E.23

2870000000 2992900000
2992910000
PWEB-ES-RT-50/2
PWEB-ES-RT-50/5
I.4
I.4 3060000000 8000100997 EM CONNECTOR VOLTAGE ATTB E.23

2874720000 US67-USB-STICK-BLE F.31 2992920000 PWEB-ES-RT-500/10 I.4 3068970000 EM220 BRACKET B.10
2875320000 PWEB-ES-RT-5000/2 I.4 2992930000 PWEB-ES-RT-500/2 I.4 3069360000 US67-MNT-00M08-00M06-000 F.31
2875330000 PWEB-ES-RT-5000/5 I.4 2992940000 PWEB-ES-RT-500/5 I.4 3069470000 US67-MNT-00M08-000M8 -CON F.31
2875340000 PWEB-ES-RT-5000/10 I.4 2997580000 PWEB-SCADA-RT-1000/10 I.8

3070000000
2880000000 3000000000 3072980000 US67-MNT-00M08-00M10-S30 F.31
2883990000 UC20-PK-2839160000-SP G.23 3008100000 ENERGY METER 535-24 B.16 3073200000 US67-MNT-00M08-00M10-S24 F.31
2884000000 UC20-PK-2839150000-SP G.22 3008100000 ENERGY METER 535-24 B.20 3073210000 US67-MNT-00M08-00M12-S30 F.31
2885080000 EML-ER-RT-S I.14 3008130000 ENERGY METER 535-230 B.16 3073300000 US67-MNT-00M08-00M12-S24 F.31
2885090000 EML-ER-RT-M I.14 3008130000 ENERGY METER 535-230 B.20 3073330000 US67-MNT-00M08-00M16-000 F.31
2885110000 EML-ER-RT-L I.14 3008140000 CMA-A20-40-1A-3-1VA E.14 3073360000 US67-MNT-00M08-00M20-000 F.31
2885120000 AML-MB-AZ-3-Trial I.10 3008200000 CMA-A20-50-1A-3-1VA E.14 3073370000 US67-MNT-00M08-00M24-000 F.31
2885130000 AML-MR-AZ-Trial I.10 3008210000 CMA-A20-60-1A-1-1VA E.14 3073380000 US67-MNT-00M08-00M30-000 F.31
2886740000 AML-MR-MA-AZ-S I.10 3008220000 CMA-A20-75-1A-1-1,5VA E.14 3073540000 US67-MNT-00M08-003/8-000 F.31
2886750000 AML-MR-MA-AZ-M I.10 3008230000 CMA-A20-100-1A-1-2,5VA E.14 3073550000 US67-MNT-00M08-01/4U-000 F.31
2886760000 AML-MR-MA-AZ-L I.10 3008240000 CMA-A20-125-1A-0,5-2,5VA E.14 3073570000 US67-MNT-00M08-01/4N-000 F.31
3008250000 CMA-A20-150-1A-0,5-2,5VA E.14 3073690000 US67-MNT-00M08-01/2B-000 F.31

2890000000 3008260000
3008270000
CMA-A20-200-1A-0,5-5VA
CMA-A30-250-1A-0,5-5VA
E.14
E.14
3073700000
3073740000
US67-MNT-00M08-0GLUE-000
US67-MNT-00M08-0MAG1-000
F.31
F.31
2896860000 AML-Operations plus I.10 3008280000 CMA-A30-300-1A-0,5-5VA E.14 3073750000 US67-MNT-00M08-0MAG2-000 F.31
2896870000 AML-Operations Basic I.10 3008440000 PILOTKIT U-SENSE VIBRATION F.31 3074630000 US67-SLV-VIB2X F.31
2896880000 AML-Cloud-Cost I.10 3074640000 US67-SLV-VIB4X F.31

3010000000 3074650000 US67-SLV-VIB6X F.31

2920000000 3012570000 U-OS-CODESYS-VISU-XXL I.15

3074700000
3074720000
US67-CON-VIB4X-01500
US67-CON-VIB4X-04500
F.31
F.31
2920830000 UR20-3EM-400V-AC-CT1A G.15 3012600000 U-OS-CODESYS-OPC-UA-XL I.15 3074730000 US67-CON-VIB4X-09500 F.31
2920840000 UR20-3EM-400V-AC-CT5A G.16 3074740000 US67-CON-VIB6X-01500 F.31
2920850000
2920860000
UR20-3EM-400V-AC-RC
UR20-3EM-400V-AC-333MV
G.17
G.18 3020000000 3074750000
3074760000
US67-CON-VIB6X-04500
US67-CON-VIB6X-09500
F.31
F.31
2924000000 U-OS-CODESYS-BASIC-S I.15 3029480000 RESMA-100-IMPORT H.11
2924020000
2924030000
U-OS-CODESYS-BASIC-M
U-OS-CODESYS-BASIC-L
I.15
I.15
3029490000
3029500000
RESMA-200-IMPORT
RESMA-500-IMPORT
H.11
H.11 3090000000
2924040000 U-OS-CODESYS-STANDARD-S I.15 3029510000 RESMA-1000-IMPORT H.11 3094340000 US67-VIB20C-ANA-00160000A00000 F.13
2924050000 U-OS-CODESYS-STANDARD-M I.15 3029520000 RESMA-3000-IMPORT H.11 3094350000 US67-VIB20C-ANA-00320000A00000 F.13
2924060000 U-OS-CODESYS-STANDARD-L I.15 3029530000 RESMA-10000-IMPORT H.11 3094360000 US67-VIB20C-ANA-0016A000A00000 F.14
2924070000 U-OS-CODESYS-PERFORMANCE-M I.15 3029540000 RESMA-100-RECIPE H.11 3094370000 US67-VIB20C-ANA-00160A00A00000 F.14
2924080000 U-OS-CODESYS-PERFORMANCE-L I.15 3029550000 RESMA-200-RECIPE H.11 3094380000 US67-VIB22C-IOL-0UNI0001A00000 F.15
2924090000 U-OS-CODESYS-REDUNDANCY I.15 3029560000 RESMA-500-RECIPE H.11 3094630000 US67-VIB22C-IOL-0UNI0A01A00000 F.15
2924100000 U-OS-CODESYS-VISU-M I.15 3029570000 RESMA-1000-RECIPE H.11 3094640000 US67-VIB24C-IOL-0UNI0002A00000 F.16
2924110000 U-OS-CODESYS-VISU-L I.15 3029580000 RESMA-3000-RECIPE H.11 3094650000 US67-VIB24C-IOL-0UNI0A02A00000 F.16
2924120000 U-OS-CODESYS-VISU-XL I.15 3029610000 RESMA-200-REGRESSION H.11 3094660000 US67-VIB40C-ANA-00160000B00000 F.19
2924130000 U-OS-CODESYS-Communication XXL I.15 3029620000 RESMA-500-REGRESSION H.11 3094750000 US67-VIB40C-ANA-00160003B00000 F.19
2928020000 UC20-WL2000-AC-CAN G.27 3029630000 RESMA-1000-REGRESSION H.11 3094790000 US67-VIB40C-ANA-00160A00B00000 F.20
3029640000 RESMA-3000-REGRESSION H.11 3094870000 US67-VIB40C-ANA-A0160000BB0000 F.20

2930000000 3029650000 RESMA-10000-REGRESSION H.11 3094880000

3094960000
US67-VIB40C-ANA-B0160000B00000
US67-VIB40C-ANA-00320000B00000
F.21
F.21
2938730000
2938730000
SLA Technical Support (PWEB/ResMa)
SLA Technical Support (PWEB/ResMa)
H.11
I.4 3030000000 3095030000
3095040000
US67-VIB40C-ANA-C0160000B00000
US67-VIB42C-ANA-00160000B00000
F.22
F.22
2938730000 SLA Technical Support (PWEB/ResMa) I.8 3036610000 RESMA-100 H.11 3095050000 US67-VIB44C-ANA-0A080000B00000 F.23
2938730000 SLA Technical Support (PWEB/ResMa) I.10 3036620000 RESMA-200 H.11 3095130000 US67-VIB46C-ANA-00160003B00000 F.23
2938790000 Basic Training H.11 3036630000 RESMA-500 H.11 3095140000 US67-VIB60C-ANA-0016B000C00000 F.25
2938790000 Basic Training I.4 3036640000 RESMA-1000 H.11 3095160000 US67-VIB60C-ANA-D016B000CB0000 F.25
2938790000 Basic Training I.8 3036650000 RESMA-3000 H.11 3095190000 US67-VIB60C-ANA-E016B000C00000 F.26
2938800000 Customer Specific Training I.4 3036660000 RESMA-10000 H.11 3095410000 US67-VIB60C-ANA-0032B000C00000 F.26
2938800000 Customer Specific Training I.8 3036670000 RESMA-100-PROD H.11 3095420000 US67-VIB60C-ANA-0016BA00C00000 F.27
2938810000 Installation Standard H.11 3036690000 RESMA-200-PROD H.11 3095430000 US67-VIB60C-ANA-0016B003C00000 F.27
2938820000 Project Coordination H.11 3036700000 RESMA-500-PROD H.11 3095440000 US67-VIB62C-ANA-0A08B000C00000 F.28

X
2938840000 Inbetriebnahme [Stunde] H.11 3036710000 RESMA-10000-PROD H.11 3099190000 EM111-RTU-2P-MID B.6
3036720000 RESMA-3000-PROD H.11 3099190000 EM111-RTU-2P-MID B.11

2940000000 3036750000
3036760000
RESMA-100-ENMS
RESMA-200-ENMS
H.11
H.11
3099200000
3099200000
EM120-RTU-2P-MID
EM120-RTU-2P-MID
B.6
B.11
2941960000 U-OS-PWEB-ES-RT-500/2 I.4 3036770000 RESMA-500-ENMS H.11 3099210000 EM122-RTU-2P-MID B.6
2941970000 U-OS-PWEB-ES-RT-500/5 I.4 3036780000 RESMA-1000-ENMS H.11 3099210000 EM122-RTU-2P-MID B.12

3043800000 X.5
 Addresses worldwide
Addresses worldwide

X
You can find all Weidmüller addresses
and your local contact on the internet at:
www.weidmueller.com/countries

X.6 3043800000
 Addresses worldwide
Sales company

Representation abroad

Distributors

3043800000 X.7
Index

We cannot guarantee that there are no mistakes in the

publications or software provided by us to the customer for the
purpose of making orders. We try our best to quickly correct
errors in our printed media.

All orders are based on our general terms of delivery, which can
be reviewed on the websites of our group companies where you
place your order. On demand we can also send the general terms
of delivery to you.

X
Imprint: Weidmüller Interface GmbH & Co. KG, Klingenbergstraße 26, 32756 Detmold, Tel.: +49 5231 14280, E-Mail: [email protected], www.weidmueller.de | Limited partnership (KG), Registered office: Detmold, Register court Lemgo HRA 2790 | General partner:
Weidmüller Führungsgesellschaft mbH, Registered office: Detmold, Register court Lemgo HRB 3924, VAT ID no.: DE124599660 | Corporate Executive Management: Dr. Timo Berger, Dr. Sebastian Durst, André Sombecki

X.8 3043800000
Weidmüller – Your partner in Smart Industrial Connectivity

As experienced experts we support our customers and partners around the world
with products, solutions and services in the industrial environment of power,
signal and data. We are at home in their industries and markets and know the
technological challenges of tomorrow. We are therefore continuously developing
innovative, sustainable and useful solutions for their individual needs. Together we
set standards in Smart Industrial Connectivity.

Technical Guide ou r m ea su ring and mon

itoring system
cal Gui de w
s
ith
information on offer a Techni
More detailed ad di tio n w e ec t of
our website. In related to the
subj
is available on ni ca l ba sic knowledge
te ch
comprehensive
ring.
energy monito
ymonitoring
ller.com/energ
www.weidmue

Made in Germany
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
32758 Detmold, Germany
T +49 5231 14-0 Personal support can
F +49 5231 14-292083 be found on our website:
www.weidmueller.com www.weidmueller.com/contact Bestellnummer: 3043800000/12/2024/SMD