Technical Support and E-Warranty Certificate www.vevor.
com/support
SLIDING GATE OPERATOR
MODEL: MD750
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
SLIDING GATE
OPERATOR
MODEL: MD750
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
-1-
Dear user,
Thank you for your purchase of our Remote-Control Door Machine. Please read
and understand the instruction manual carefully before using the product. Always
ensure the safety first, please follow all the safety instruction provided in the
instruction manual attentively. Fully understand the working principle before
attempting installation.
Safety Instructions
Safety Instruction
1. Must use 220V~240V of power supply. Do not use over or under supply voltage.
2. When installing or performing maintenance, always ensure the input power is cut-off.
3. Please ensure proper grounding is applied to the product with grounding resistance < 4m,
it is recommended to use short circuit or current leakage protection.
4. Please ensure proper welding is applied when working with block iron. Make sure the iron
does not come in contact with any open electrical circuit.
5. Always ensure proper safety and follow the instruction provided carefully when installing
the product. Ensure the gate has firm base to prevent any tilting in case of power failure.
6. Before installing the door, clean any obstacles that may aid door malfunction. The
product is designed for domestic use only. Installing near public places or near pedestrian
walking area is not recommended.
7. Please ensure the remote control and the control box is away from the reach of children.
8. Please do not perform disassembly by yourself. Always take help of professionals when
performing maintenance.
Technical Parameters
1. Supply power:220VAC~240VAC / 2. Motorpower:370W/550W/750W/120
50Hz 0W
3. Input current: 3A 4. Motor speed: 1400RPM
5. Running speed: 12m/min 6. Suitable door weight: 100-2000KG
7. Temperature: -25°C ~ +70°C 8. Reserved line installation: 1 square
millimeter (or 1.5 square meter with
tow conductor)
-2-
Working Principle:
It consists of motor, worm gear, and driven gear. The motor drives worm gear and
driven gear. The driven gear in turn drives the rack. The motor transfers its motion
energy to the socket through worm and driven gear. Both the gears will rotate
simultaneously when clutch is engaged, so that the door can open and close with
simple electrical controls. In case if the power fails, disengage the clutch through
disengage key (by turning it at about 90°).
Instruction
Please read the instruction carefully before use
Sliding gate opener installation schematic diagram
1、Installing the metal base
The machine should be installed using the bolt on the metal base. Please follow
-3-
the metal base installation pictures below (P1).
2、Installing the steel rack
Firstly, put it above the door motor teeth, deviate from the door machine, and then
through the door steel rack and slowly push forward, bit by bit till it fixed on the
steel rack. Following this method, you can make sure the rack and pinion teeth fit
together perfectly. (P2) While installing please make sure you do not apply excess
weight on the door and the gear.
3、Motor release clutch (manual door open)
The door can be manually opened using the release lock mechanism. This feature
ensures manual opening of the door in case of power failure. Please follow the
picture below (P3).
-4-
4、Installing limit switch
To finalize the position of the stroke, the switch bracket should be installed on rack
(P4-P5). For spring switch limit should align with iron block. For magnetic switch
limit make sure the magnet points towards the motor, position of shield shell
magnetic limit switch should be located.
-5-
5、Motor wiring diagram (P6)
Electrical connection
1. The connection shall be made in strict accordance with the label on the
-6-
terminal, and "fire" and "zero" shall not be reversed.
2. Observe safety regulations and separate power lines and control lines.
3. Motor enclosure must be grounded.
4. According to the wiring diagram below, it is important to separate the power
line from the control line, especially not to connect the "switch in place" control line
to the motor line and power line, otherwise the controller will be damaged.
5.Schematic diagram of the composition of the control board and remote control
-7-
Pairing instructions:
1. Learning remote control: hold down the learning button until the learning
indicator light LED is on, press any key of the remote control for 1 second, then the
coding is finished, and the learning indicator is flashing.
2. Delete password: press and hold the learning button for 12 seconds to
automatically remove all alignment codes and the original remote control is invalid。
3.The remote control adopts advanced vehicle rolling code technology, and the
common remote-control code on the outside is not easy to be repeated, effectively
preventing the door opening by mistake. The remote control has intelligent
program design. Press the remote control for 4 seconds to automatically stop the
launch, so as to prevent it from interfering with other remote control. And save
remote battery power. Convenient for transportation and storage.
4. You can learn more than 40 remote controls.
Use a function:
1.The controller has the automatic memory function of power off. It is possible that
-8-
the debugging test has been carried out by the manufacturer，Limit detection, so
the door must be pushed to the middle during installation。
2. Because the controller is turned on after the power is off. First of all, execute the
turn on. This is normal phenomenon。
3. Single key loop: single key loop interface 1.3。
4. The potentiometer has automatic door closing. Turn counterclockwise to
minimum close automatic door closing. The LED flicker once represents 1 second。
5. Equipped with infrared interface. And automatic resistance return.
6. Open the door automatically when the interface is switched on.
Power supply test
1.Before using the product, carefully check the power supply voltage, frequency
and other data is in accordance with the requirement stated. Ensure proper
grounding is applied and electrical wiring are accurate.
2.Turn the special random key counterclockwise, open the clutch and push the
sliding door. Make the door movement idle if the door machine is working normally.
Switch the special random key on-off clockwise, shut down the clutch.
3.Apply the input power supply, start to open the door. Observe the door
movement.
4.Carefully adjust magnets or mechanical stop positions until the door opens and
closes as per user requirement.
Maintenance
1.Coat the clutch keyhole with small amounts of antirust oil to prevent rust.
2.Regularly check the condition of electrical grounding.
3.Perform regular checks to ensure the parts are in good condition.
4.Motor requires advanced lubricating grease for smooth movement. Please do
not apply regular lubricating oils.
-9-
5.The controller places the child out of reach. Always check whether the
wire is broken, loose and wet. If you find it, please cut off the high-voltage
power immediately and use it after repairing and replacing.
Error analysis and correction
Obstacle Cause analysis Corrections
1 Motor does not No power supply, low or no Check the power supply,
work capacitance, overload, thermal replace the capacitor,
protection, inductive switch is inspect the door for any
damaged, broken or loose obstacles. Replace the
cable. induction switch, connect
the cables properly
- 10 -
2 Door opens Damage to induction switch, Replace the induction
but does not A/COM/C line is wrong, check door, adjust the doors
close or wise the controller or motor position, make sure wiring
versa is done according to wiring
diagram, check for any
open circuit
3 Does not limit Induction switch distance is too Adjust the position
long, induction switch position according to wiring
is not correct, the magnet diagram, check for any
position is not correct, open circuit, replace the
W.V.COM is wrong, induction induction switch
switch is damaged
4 Manual clutch The clutch handle is damaged, Replace the clutch handle
failure rotation error, clutch is binding as per instructed, turn the
output gear right or left
5 Press “open” W.V line connection error Ensure wiring is properly
to “close” connected
6 Motor rotating Clutch pressure spring failure, Check, adjust or replace,
but door is elasticity is insufficient, clutch is replace or adjust the
non-functional disengaged, friction clutch spring pressure
pressure spring failure
Troubleshooting method
fault phenomenon Analysis of the fault To deal with failure
There is no 110V power input Check power line
- 11 -
1.1. Check the output
A. The power The fuse is broken. The line for short circuit.
indicator is off connector is not in place 2. Replace the same
specification after
troubleshooting
B. Power indicator The clutch is not closed Re-close the clutch
light is on, press open
and close key, door Circuit board damage due to Back for repair
body cannot.be short circuit or severe
switched open and off overload of external devices.
C. Press the "open" 1.Limit sensor cable short 1. Check the circuit and
button and "close" circuit or break. troubleshoot. Bring the
button, and the door 2.sensor away from magnet. sensor to the point
body will stop magnet.
automatically or stop
Limit the damage Replace sensor
when the limit is
reached
D. Press the "open" Check the circuit and
Short circuit of infrared probe
button to turn green, troubleshoot the probe
line
but press the "close" line
button to stop and Replace the infrared
back Infrared probe damaged
probe
1.Replace the
E. The remote control
1.Battery is low remote-control battery
becomes shorter
23A or 27A 12v.
- 12 -
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address：Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi
Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD
NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
SHUNSHUN GmbH
Römeräcker 9 Z2021,76351
EC REP Linkenheim-Hochstetten,Germany
[email protected]
+49 1727041930
Pooledas Group Ltd
Unit 5 Albert Edward House, The
UK REP Pavilions Preston, United Kingdom
[email protected] Tel: 01772418127
Made In China
- 13 -
Technical Support and E-Warranty Certificate
www.vevor.com/support
