User’s

Manual
Dishwasher

DF15A
DF15A
 Please read this user manual first!
Dear Customer,
We hope that you get the best results from your product which has been manufactured
with high quality and state-of-the-art technology. Therefore, please read this entire user
manual and all other accompanying documents carefully before using the product and
keep it as a reference for future use. If you handover the product to someone else, give
the user manual as well. Follow all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences
between models will be identified in the manual.

Explanation of symbols
Throughout this User Manual the following symbols are used:

C Important information or useful

hints about usage.

A Warning for hazardous situations

with regard to life and property.

B Warning for electric shock.

Packaging materials of the

product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.

Do not dispose of the packaging materials together with the domestic or other wastes.
Take them to the packaging material collection points designated by the local authorities.

Dishwasher
User’s Manual
This product was manufactured using the latest technology in environmentally friendly conditions.
CONTENTS

1 INSTRUCTIONS FOR SAFETY Upper basket height adjustable rack.24

AND ENVIRONMENT 4 Upper basket multipurpose service
General safety........................................4 rack........................................................ 24
Intended use...........................................4 Adjusting the height of the upper
Children’s safety.....................................5 basket................................................... 25
Disposing of packaging material.........5 Collapsible upper basket wires......... 26
Transportation of the product.............5 Height setting with empty basket... 26
Compliance with WEEE Directive and Ceiling cutlery basket..........................27
Disposing of the Waste Product..........6 Ceiling cutlery basket..........................27
Compliance with RoHS Directive.........6
Package information.............................6 5 OPERATING THE PRODUCT28
Programme Selection / Programme
2 DISHWASHER 7 Cancel key............................................. 29
Overview.................................................7 Function Keys...................................... 29
Fan drying system..................................8 Preparing the machine...................... 29
Technical specifications........................8 Programme selection......................... 29
Auxiliary functions............................. 32
Scheduling the washing time........... 34
3 INSTALLATION 9 Starting the programme.................... 35
Appropriate installation location........9 Cancelling the programme................ 35
Connecting water supply......................9 Salt indicator ( )............................... 35
Connection to the drain..................... 10 Rinse Aid indicator ( )...................... 35
Adjusting the feet............................... 10 Adjusting the amount of rinse aid.... 35
Aquasafe+ ............................................11 End of programme.............................. 36
Electrical connection...........................11 Water cut-off warning........................ 36
Initial use...............................................11 Overflowing warning.......................... 36
4 PREPARATION 12 6 HOMEWHIZ FUNCTION 37
Tips for energy saving.........................12 HomeWhiz Setup and User Account
Water softening system.....................12 Settings.................................................37
Adjusting the water softening
system...................................................12
Adding salt............................................14 7 MAINTENANCE AND
Detergent..............................................15 CLEANING 42
Tablet detergents................................16 Cleaning the outer surface of the
Rinse aid................................................17 product................................................. 42
Items not suitable for washing in the Cleaning the interior of the machine.42
dishwasher........................................... 18 Cleaning the filters............................. 42
Placing the dishes into the Cleaning the hose filter...................... 43
dishwasher........................................... 18 Upper impeller .................................... 44
Cutlery basket ..................................... 20 Cleaning the impellers....................... 44
Cutlery basket ..................................... 20 Lower impeller assembly................... 44
Collapsible lower basket tines...........21
Collapsible lower basket tines...........21 8 TROUBLESHOOTING 45
Tray Wash Supports............................ 22
SoftTouch Accessory.......................... 22 9 WARRANTY 50
Lower Basket Glass Holder................ 22
Lower basket multipurpose / height
adjustable service rack...................... 23
Lower basket bottle wire................... 24
 1 instructions for safety and environment
This section contains safety •• Never touch the plug with
instructions that will help to get wet hands! Never unplug by
protected from risk of personal pulling on the cable, always
injury or property damage. Failure pull out by grabbing the plug.
to follow these instructions shall •• The product must be
void all warranties. unplugged during installation,
maintenance, cleaning and
General safety repairing procedures.
•• Never place the product •• Always have the installation
on a carpet-covered floor; and repairing procedures
otherwise, lack of airflow carried out by the Authorised
beneath the product will Service Agent. Manufacturer
cause electrical parts to shall not be held liable for
overheat. This will cause damages that may arise from
problems with your product. procedures carried out by
•• Do not operate the product unauthorised persons.
if the power cable / plug is •• Never use chemical solvents
damaged! Call the Authorised in the product. They bring
Service Agent. forth the risk of explosion.
•• Connect the product to a •• When you pull the upper and
grounded outlet protected lower baskets out completely,
by a fuse complying with the door of the product will
the values in the “Technical bear all the weight of the
specifications” table. Do baskets. Do not put other
not neglect to have the loads on the door; otherwise,
grounding installation made the product may tilt.
by a qualified electrician. The •• Never leave the door of
manufacturer shall not be the product open apart
liable for any damages that from loading and unloading
will arise when the product procedures.
is used without grounding •• Do not to open the door of
in accordance with the local the product when it is running
regulations. unless necessary. Be careful
•• The water supply and for the rush of hot steam
draining hoses must be when you open the door.
securely fastened and remain
undamaged. Intended use
•• Unplug the product when not •• This product has been
in use. designed for domestic use.
•• Never wash the product by •• It must be used to do the
spreading or pouring water domestic type dishes only.
onto it! There is the risk of
electric shock!
4 /52 EN Dishwasher / User’s Manual
instructions for safety and environment
•• This appliance is intended Children’s safety
to be used in household and •• Electrical products are
similar applications such as: dangerous for the children.
- Staff kitchen areas in shops, Keep children away from the
offices and other working product when it is in use. Do
environments; not let them to tamper with
- Farm houses; the product.
- By clients in hotels, motels •• Do not forget to close the door
and other residential type of the product when leaving
environments; the room where it is located.
- Bed and breakfast type •• Store all detergents and
environments additives in a safe place away
•• Only dishwasher safe from the reach of the children.
detergents, rinse aids and
additives must be used. Disposing of
•• The manufacturer waives packaging material
any responsibility arisen Packaging materials are
from incorrect usage or dangerous to children. Keep
transportation. packaging materials in a safe place
•• The service life of your away from reach of the children.
product is 10 years. During Packaging materials of the
this period, original spare product are manufactured from
parts will be available to recyclable materials. Dispose
operate the product properly. of them properly and sort in
•• This appliance can be used accordance with recycled waste
by children aged from 8 years instructions. Do not dispose
and above and persons with of them with normal domestic
reduced physical,sensory waste.
or mental capabilities or
lack of experience and Transportation of the
knowledge if they have product
been given supervision or

A
instruction concerning use If you need to move the
of the appliance in a safe product, do it in upright
way and understand the position and hold from
hazards involved. Children the rear side. Slanting
shall not play with the the product onto its
appliance. Cleaning and user front side may cause the
maintenance shall not be electronic parts in it get
made by children without wet and damaged.
supervision.

Dishwasher / User’s Manual 5 / 52 EN

instructions for safety and environment

1. Unplug the product before Package information

transporting it. Packaging materials of the
2. Remove water drainage and product are manufactured from
water supply connections. recyclable materials in accordance
3. Drain the remaining water in with our National Environment
the product completely. Regulations. Do not dispose
of the packaging materials
Compliance with together with the domestic or
other wastes. Take them to the
WEEE Directive and packaging material collection
Disposing of the points designated by the local
authorities.
Waste Product
This product complies with
EU WEEE Directive
(2012/19/EU). This product
bears a classification symbol
for waste electrical and electronic
equipment (WEEE).This product
has been manufactured with high
quality parts and materials which
can be reused and are suitable for
recycling. Do not dispose of the
waste product with normal
domestic and other wastes at the
end of its service life. Take it to the
collection center for the recycling
of electrical and electronic
equipment. Please consult your
local authorities to learn about
these collection centers.
Compliance with RoHS
Directive
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited materials
specified in the Directive.

6 /52 EN Dishwasher / User’s Manual

2 Dishwasher

Overview

1. Upper basket
2. Upper impeller
3. Lower impeller
4. Silverware basket
15 5. Door
6. Rating Label
7. Control panel
8. Detergent dispenser
9. Lower basket
10. Filters
11. Salt reservoir lid
12. Upper basket rail
13. Upper cutlery basket (depends on model)
14. Tabletop (depends on model)
15. Fan drying system (depends on model)

Dishwasher / User’s Manual 7 / 52 EN

Dishwasher

Technical specifications
Compliance to standards and test data / EC declaration of conformity
This product complies with the following EU directives;
Development, production and sales stages of this product comply with the safety
rules included in all pertaining European Community regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power input 220-240 V, 50 Hz (see rating label)
Total power consumption 1800-2100 W (see rating label)
Heater power consumption 1800 W (see rating label)
Total current (depends on the model) 10 A (see rating label)
Drain pump power consumption 30 W (see rating label)
Water pressure 0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0
Mpa)

C Technical specifications may be changed without prior notice to improve the

quality of the product.

C Figures in this manual are schematic and may not match the product exactly.

C
Values stated on the markings of the product or in the printed documents
accompanying the product are obtained in the laboratory on basis of the relevant
standards. Depending on operational and environmental conditions of the
product, these values may vary.

Call center number mentioned:

981899 4444 / 1860 599 4444 & service e mail / contact > [email protected]

Fan drying system

(depends on model)
Fan drying system ensures efficient drying of your dishes.
It is normal to hear a different sound than that of washing cycle during fan operation.

Note for test institutions:

Data required for performance tests shall be provided upon request. Requests can be
e-mailed to the following address:
[email protected]
Do not forget to provide the code, stock and serial numbers of the product to be tested in
your request e-mail along with your contact information. Code, stock and serial numbers of
the product may be found on the type label attached to the side wall of the door.

8 /52 EN Dishwasher / User’s Manual

3 Installation
Refer to the nearest Authorised Service Appropriate installation
Agent for installation of your product. To location
make the product ready for use, make sure
•• Place the product on a solid and flat
that the electricity, tap water supply and
floor that has sufficient load carrying
water drainage systems are appropriate
capacity! The product must be installed
before calling the Authorised Service Agent.
on a flat surface in order for the door to
If they are not, call a qualified technician
be closed comfortably and securely.
and plumber to have any necessary
•• Do not install the product at places
arrangements carried out.
where temperature may fall below 0ºC.

C
Preparation of the location and •• Place the product at least 1 cm away
electrical, tap water and waste from the edges of other furniture.
water installations at the place •• Place the product on a rigid floor. Do
of installation is the customer's not place it on a long pile rug or similar
responsibility. surfaces.

B B
Installation and electrical
Do not place the product on the
connections must be carried
power cable.
out by the Authorised Service
Agent. Manufacturer shall not •• Make sure that you select a location
be held responsible for damages that will allow you to load and unload
arising from processes carried the dishes in a fast and comfortable
out by unauthorised persons. manner.

A
Prior to installation, visually •• Install the product in a place close to
check if the product has any the tap and the drain hole. Select the
defects on it. If so, do not have installation location by considering
it installed. Damaged products that it will not be changed after the
cause risks for your safety. connections are made.

C
Make sure that the water inlet Connecting water supply
and discharge hoses are not

C
We recommend attaching a
folded, pinched or crushed
filter on the house/apartment
while pushing the product into
supply water inlet to protect the
its place after installation or
machine from damages that
cleaning procedures.
may arise from impurities (sand,
When placing the product, pay attention not dirt, rust, etc.) coming from the
to damage the floor, walls, piping, etc. Do urban water supply system or
not hold the product by its door or panel to from your own water system as
move it. well as to prevent complaints
such as yellowing or sludge
accumulation at the end of
washing.

Dishwasher / User’s Manual 9 / 52 EN

Installation
Permitted water temperature: up causes dirty washing.
to 25°C Attach the water discharge hose to the
The dishwasher may not be connected to drainpipe without bending it. Tightly fix the
open warm water devices or flow-through water discharge hose to the drainpipe in
water heaters. order to prevent any dislocation of the water
discharge hose during operation of the
•• Do not use old or used water inlet hose product.
on the new product. Use the new water
inlet hose supplied with the product.
•• Connect the water inlet hose directly
to the water tap. Pressure coming from
the tap should be minimum 0.3 and
maximum 10 bars. If the water pressure
exceeds 10 bars, a pressure relief valve
should be installed in between.
•• Open the taps completely after making
the connections to check for water

120
min
leaks.

max 1000
C
Use a screw-on hose connector

min 500
to connect the water inlet hose

300
min
to a water tap with a ¾ inch
external thread. If required, use
a filter insert to filter deposits

C
Drainpipe must be connected
from the pipes.
to the sewage system and it
should not be connected to any
surface water.

Adjusting the feet

If the door of the product cannot be closed
properly or if the product swings when you
push it slightly, then you need to adjust

A
For your safety, close the water the feet of the product. Adjust the feet of
inlet tap completely after the the product as illustrated in the installation
washing programme is over. manual supplied with the product.

A
Dishwashers door must be
Connection to the drain aligned properly otherwise hot
steam can escape! Danger of
Water discharge hose can directly be
serious burns, other injury or
connected to the drain hole or sink’s
may damage furniture.
drainage. The length of this connection must
be min. 50 cm and max. 100 cm from the
floor. A discharge hose longer than 4 meters

10 /52 EN Dishwasher / User’s Manual

Installation
Aquasafe+ •• The voltage and allowed fuse or
(depends on model) breaker protection are specified in the
The Aquasafe+ system protects against “Technical specifications” section. If the
water leaks that may occur at the hose inlet. current value of the fuse or breaker in
Water contact with the valve box of the the house is less than 16 Amps, have
system must be avoided to prevent damage a qualified electrician install a 16 Amp
to the electrical system. If the Aquasafe+ fuse.
system is damaged, unplug the product and •• The specified voltage must be equal to
call the Authorised Service Agent. your mains voltage.
•• Do not make connections via extension

A
As the hose set contains cables or multi-plugs.
electrical connections and

B
assemblies, never shorten Damaged power cables must
or lengthen the hose with be replaced by the Authorised
extension hoses. Service Agent.

B
If your dishwasher is equipped
with internal illumination, lamp
should only be replaced by the
Authorised Service Agent in case
of failures that may occur on the
lamp.

B
If the product has a failure, it
should not be operated unless
it is repaired by the Authorised
Service Agent! There is the risk
of electric shock!

Initial use
Electrical connection
Before starting to use the product, make
Connect the product to a grounded outlet
sure that all preparations are made in
protected by a fuse complying with the
accordance with the instructions in sections
values in the “Technical specifications” table.
“Important safety instructions” and
The manufacturer shall not be liable for any
“Installation”.
damages that will arise when the product is
•• To prepare the product to do the
used without grounding in accordance with
dishes, perform first operation in the
the local regulations.
shortest programme with detergent
•• Connection must comply with national
while the machine is empty. During the
regulations.
initial use, fill the salt reservoir with 1
•• Power cable plug must be within easy
litre of water prior to filling it with salt.
reach after installation.

A
There might be a small amount

B Unplug the product after the

washing programme is over.
of water left in the product after
factory quality control tests. This
has no harm on the product.
Dishwasher / User’s Manual 11 / 52 EN
4 Preparation
Tips for energy saving Adjusting the water
Following information will help you use the softening system
product in an ecological and energy-efficient Cleaning, rinsing and drying performance of
manner. your dishwasher will increase when water
Wipe away any coarse food remnants on the softening system is adjusted properly.
dishes before putting them in the product. Adjust the new water hardness level
Operate the product after filling it according to the Water hardness level
completely. instruction in this booklet.
When selecting a programme, consider Use the test strip supplied with the product
the table of "Programme data and average according to the steps given below to
consumption values". determine hardness level of your supply
Do not put more detergent than suggested water.
on the detergent package.
Water softening system
The product is equipped with a water
softening system which reduces the
hardness of incoming water. This system
softens the supply water to a level that will
allow washing the dishes with the required
quality.

C
The mains water hardness must
be softened if it is over 7°dH.
Otherwise, hardness ions will
accumulate on the dishes that
are washed and may affect the
washing, rinsing and drying
performances of the machine.

12 /52 EN Dishwasher / User’s Manual

 Preparation

Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows
strip from the let the water run for the water for about strip from the water you the hardness
packet. about a minute. a second. and shake it. level.

After determining hardness level of the supply water:

1. After switching on your machine, long press the Menu key
2. Pres the settings menu key for 3 seconds to enter the Settings Menu.
3. Using <- and +> keys, proceed until the water hardness setting indicator becomes on (“r”
position will be displayed).
4. Using the Selection key, adjust water hardness level according to the hardness of the supply
water. For correct setting please see “Water hardness level setting table”.
5. Switch off your machine to save the new settings.
Water hardness level adjustment table
Hardness English Water German Water French Water Water Hardness Level Indicator
Level Hardness °dE Hardness °dH Hardness °dF

Level 0 0-5 0-4 0-8

Press the Selection key to switch the water
Level 1 6-9 5-7 9-13 hardness level to position 1. (r1)

Level 2 Press the Selection key to switch the water

10-15 8-12 14-22 hardness level to position 2. (r2)
Level 3 16-19 13-15 23-27 Press the Selection key to switch the water
hardness level to position 3. (r3)
Level 4 Press the Selection key to switch the water
20-24 16-19 28-34 hardness level to position 4. (r4)
Level 5 Press the Selection key to switch the water
25-62 20-50 35-90 hardness level to position 5. (r5)
In order to protect your glassware against glass corrosion in an optimal way, you have to
perform the same hardness settings, which you have made in the control panel, with the
regeneration setting switch.
For example, if you have adjusted to “3rd level” in the control panel, also set the regeneration
adjustment switch to 3rd level.
Regeneration Adjustment Switch
0th Level 1st Level 2nd Level 3rd Level 4th Level 5th Level

1 1 2 3 4 5

Dishwasher / User’s Manual 13/52 EN

Preparation

C
If the hardness level of the supply water Salt reservoir will be filled with
is above 90 °dF or if you are using well water when you start the
water, then it is recommended to use water product. For this reason, add salt
purification devices and special filters. before operating the machine.
If the hardness level of the supply water is
below 13°dF, there is no need to use salt 1. Firstly, take the lower basket out to add
in your dishwasher. If this is the case, “No softening salt.
Salt Warning Indicator” (if any) illuminates 2. Turn the salt reservoir lid counter-
continuously on the panel of your machine. clockwise to open it (A).
If the water hardness level adjustment is set
to level 1, the “No salt warning indicator” will
illuminate continuously although it is not
necessary to use salt. If you use salt under
this condition, salt will not be consumed and
the Salt indicator will not illuminate.

C
If you move your house, it is
necessary to readjust water
hardness level of your machine
by considering the information
given above according to the 3. Add 1 litre of water to salt reservoir of
hardness level of the supply your machine only in initial use.
water in your new location. 4. Fill the salt reservoir with salt by
Your machine will display the using the salt funnel (D). To speed up
most recently adjusted water dissolution rate of salt in water, stir it
hardness level. with a spoon.
Adding salt
Water softening system needs to be
regenerated in order for the product operates
with the same performance continuously.
Dishwasher salt is used for this purpose.

C
Use only special softening salts
produced particularly for the
dishwashers in your machine.

C
You can put about 2 kg of

C
It is recommended to use
softening salt into the salt
granule- or powder-formed
reservoir.
softening salts in the water
softening system. Do not use 5. Replace the lid and tighten it when the
salts that do not completely reservoir is full.
dissolve in water such as table
salt or rock salt. Otherwise the
performance of the system may
deteriorate in time.
14 /52 EN Dishwasher / User’s Manual
Preparation

C
You need to add salt right before Put the detergent into the detergent
starting the machine. Thus, the dispenser just before operating the machine
overflowing salty water will be as illustrated below.
flushed immediately, preventing 1. Push the latch to right to open the
the risk of corrosion in machine. detergent dispenser lid (A). (depends on
In cases where you would not model)
start washing immediately,
run your machine empty in the
shortest program.

C
Since different salt brands
in the market have different
particle sizes and since the water
hardness may vary, dissolution
of the salt in water may take
a couple of hours. Therefore,
Salt Indicator remains on for a
while after adding salt into the
machine.

Detergent
2. Put suggested amount of powder,
You can use powder, liquid/gel or tablet liquid/gel or tablet detergent in the
detergents in the machine. reservoir.

A
Only use in the machine the

C
Inside the detergent dispenser
detergents produced particularly
there are level markings that
for use with dishwashers.
help you use appropriate amount
We recommend you not use
of powder detergent. When
detergents that contain chlorine
brimful, detergent dispenser will
and phosphate as they are
contain 45 cm³ of detergent.
harmful for the environment.
Fill detergent up to 15 cm³ or 25
Adding detergent cm³ level marks in the detergent

C
Pay attention to the warnings dispenser according to fullness
on the detergent packaging of the machine and/or soiling
to get better washing and degree of the dishes. One
drying results. Contact the tablet is enough if you are using
manufacturer of the detergent detergent tablets.
for further questions.

A
Do not put solvents into the
detergent dispenser. There is
the risk of explosion!

Dishwasher / User’s Manual 15/52 EN

Preparation
Tablet detergents
In addition to the conventional tablet
detergents, there are also commercially
available detergent tablets that show water
softening salt and/or rinse aid effect. Some
types of these detergents contain special-
purpose components such as glass and
stainless steel protectors. These tablets
show their effects up to a certain water
3. Push the lid of the detergent dispenser hardness level (21°dH). Water softening salt
to close it. A "click" will be heard when and rinse aid must also be used together
the lid is closed. with the detergent if the water hardness
level is above the mentioned level.
1
C
The best washing performance
in dishwashers is obtained by
using detergent, rinse aid and
water softening salt individually.

C
Observe the instructions of the
detergent manufacturer on
the package when using tablet
detergents.

C
Contact the detergent

C
Use powder or liquid/gel manufacturer if your dishes
detergent in short programmes are wet and/or if you notice
without prewash since the limescale spots particularly on
solubility of the tablet detergent your glasses after the washing
changes depending on the programme is over when using a
temperature and time. tablet detergent.

16 /52 EN Dishwasher / User’s Manual

Preparation
When you switch to powder 2. Fill the reservoir until “MAX” level.
detergent from tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the highest
level and perform an empty run.
3. After the empty washing cycle, review
the user manual and readjust the water
hardness level so as to suit the water
supply.
4. Make the appropriate rinse aid settings. 3. Slightly press the point (B) of the
reservoir lid to close it.
Rinse aid

C
The rinse aid used in
dishwashers is a special
combination that aims to
increase drying efficiency and
prevent water or lime stains
on the washed items. For this
reason, care must be paid
to have rinse aid in the rinse 4. If there are stains on tableware items
aid reservoir and to use rinse after washing, level must be increased
aids produced specially for and if there is a blue trace after wiping
dishwashers only. them by hand, it must be decreased.
This is set to position 3 as factory
1. Open the lid of the rinse aid reservoir default.
with the help of the latch.

C
The rinse aid adjustment is
described under "Adjusting
the amount of rinse aid" in
the section for operating the
machine.

C
Wipe clean any spilled rinse
aid outside the reservoir. Rinse
aid that spilled accidentally
will cause foaming and it will
eventually decrease washing
performance.

Dishwasher / User’s Manual 17/52 EN

Preparation
Items not suitable for
A
To prevent possible injuries,
washing in the dishwasher always place the sharp and
•• Never wash dishes soiled by cigarette pointed dishes such as service
ash, candle remnants, polish, dyestuff, fork, bread knife, etc. upside
chemicals, etc. in your dishwasher. down so as their pointed ends
•• Do not wash silverware and cutlery will face down or they will lie
with wooden or bone stems, glued horizontally in the dish basket.
pieces, or pieces that are not resistant Unload dishes in the lower basket first and
to heat, as well as copper and tin-plated then the dishes in the upper basket.
containers in the dishwasher.

C
Decorative prints of chinaware
as well as aluminium and silver
items may get discoloured or
tarnished after washing in the
dishwasher just as it happens
in handwashing as well. Some
delicate glass types and crystals
may become dull in time. We
strongly recommend you to
check if the tableware you are
going to purchase is suitable
for washing especially in the
dishwasher.

Placing the dishes into the

dishwasher
You can use your dishwasher in the optimum
way with respect to energy consumption
and washing and drying performance only if
you place the dishes in an orderly way.
•• Wipe away any coarse food remnants
(bones, seeds, etc.) on the dishes
before placing them in the dishwasher.
•• Place thin, narrow pieces in the middle
sections of baskets if possible.
•• Place the heavily soiled and bigger
items in the lower basket and smaller,
delicate and light items in the upper
basket.
•• Place the hollowed dishes such as
bowls, glasses and pans upside down in
the dishwasher. Thus, accumulation of
water in deep hollows is prevented.

18 /52 EN Dishwasher / User’s Manual

Preparation
Suggestions for loading the dishwasher Improper Loading Of Dishware

Lower basket

Upper basket

Improper Loading Of Dishware

Dishwasher / User’s Manual 19/52 EN

 Preparation

Cutlery basket Cutlery basket

(depends on model) (depends on model)
Cutlery basket is designed to wash your Cutlery basket is designed to wash your
dishes such as knife, fork, spoon, etc. in an dishes such as knife, fork, spoon, etc. in an
efficient manner. efficient manner.
Since the cutlery basket can be moved (A, Since the cutlery basket can be moved (A,
B), you can create more space while placing B), you can create more space while placing
your dishes in the lower basket and free up your dishes in the lower basket and free up
space for your dishes of different sizes. space for your dishes of different sizes..

20 /52 EN Dishwasher / User’s Manual

Preparation

Collapsible lower basket

C
Bringing the tines to the
tines horizontal position by holding
them from the tips may cause
(depends on model) them to bend. Therefore, it will
There are foldable tines (A) located at the be appropriate to bring the tines
lower basket of the machine are designed in the middle to horizontal or
for an easier placement of large pieces such vertical position by holding them
from their stems and pushing in
as pans, bowls, etc. You can create larger the direction of arrow.
spaces by folding each tines individually or
all of them at once.
Collapsible lower basket
tines
(depends on model)
There are foldable tines (A) located at the
lower basket of the machine are designed
for an easier placement of large pieces such
as pans, bowls, etc. You can create larger
spaces by folding each tines individually or
all of them at once.

To bring the collapsible tines into horizontal

position, grab the tines from mid position
and push them in the directions of arrows
(B). To bring the tines back to vertical
position, just lift them up. Collapsible tines
will click into the latch again (C).

To bring the collapsible tines into horizontal

position, grab the tines from mid position
and push them in the directions of arrows
(B). To bring the tines back to vertical
position, just lift them up. Collapsible tines
will click into the latch again (C).

Dishwasher / User’s Manual 21/52 EN

 Preparation
SoftTouch Accessory
(depends on model)
The SoftTouch Accessory found in the lower
basket of your machine enables a safe
washing for your fragile glasses.

C
Bringing the tines to the
horizontal position by holding
them from the tips may cause
them to bend. Therefore, it will
be appropriate to bring the tines
in the middle to horizontal or
vertical position by holding them
from their stems and pushing in
the direction of arrow. Lower Basket Glass Holder
(depends on model)
Tray Wash Supports Lower Basket Glass Holder found in the
(depends on model) lower basket of your machine enables a safe
Use the supports to wash trays in the washing for your oversized and tall glasses.
bottom basket.
See the Auxiliary functions section for
appropriate programme and function
selection.

22 /52 EN Dishwasher / User’s Manual

Preparation

Lower basket multipurpose

/ height adjustable service
rack A Make sure that the impeller does
not touch the dishes you placed
on the racks.
(depends on model)
This accessory located at the lower basket To close the racks:
of your machine allows you to easily wash 1. Fold the rack (A).
pieces such as extra glasses, long ladles and 2. Slide the rack up (B).
bread knives. 3. Put the rack in vertical position (C).
4. Slide the rack down and lock it by the
tabs (D).

C You may open the racks in the

same process in reverse order.

To adjust the height of the racks:

1. Fold the rack (E).
2. Slide the rack up (F).
3. Open the rack at the desired level (G).

C
You may use the racks as
required by moving them to
lower or upper position, or close
them to create a wider space in
your lower basket.

Dishwasher / User’s Manual 23/52 EN

 Preparation
Lower basket bottle wire Upper basket multipurpose
(depends on model) service rack
The bottle wire is designed for easier (depends on model)
washing of long pieces with wide mouths. This accessory located at the upper basket
You may take out the bottle wire from the of your machine allows you to easily wash
basket when not in use by pulling it out from pieces such as extra long ladles and bread
both sides (H). knives.

Upper basket height You can lift up the upper basket

adjustable rack multipurpose service rack to remove it if you
(depends on model) do not want to use it.
Use the lower and upper parts of the height
adjustable racks in the upper basket of
the machine by sliding them down or up
according to the heights of the glasses, cups
or etc. (A, B, C).

If you want to use the upper basket

multipurpose service rack again, you can
easily attach it to the side section of your
upper basket.

24 /52 EN Dishwasher / User’s Manual

Preparation
Adjusting the height of the To lower the basket, while it is in the
upper basket uppermost position;
1. Hold the upper basket wires with both
(depends on model)
hands, slightly lift up the basket and
The upper basket height adjustment
simultaneously push and release the
mechanism has been designed for you to
latches shown in the figure (B).
create large spaces in the lower or upper 1
sections of your machine depending on your 2. Lower the basket from its current
needs by adjusting the height in the upper position to the lower one.
2
or lower direction while your basket is empty 3. Release the basket after it has reached
or loaded. one
3 level down.
Repeat the process if the height is not
Thanks to this mechanism, you can use your sufficient.
basket in three different positions, namely
lower, middle and upper positions (1, 2, 3).
1. To raise your basket, hold the upper
basket wires with both hands while the
basket is in the lowermost position and
pull them up (A).
2. You will hear a "Click" from the right
and left mechanisms, indicating that
the basket has reached the next level.
Release the basket.
Repeat the process if the height is not
sufficient.

C
The movement mechanism
may not function properly if the
upper basket is overloaded or
if the weight distribution is not
balanced. In heavier conditions,
1 there is the risk of falling one
level down.
2

C
Make sure that the adjustment
3 mechanism has the same
positions on the right and left
sides of the upper basket.

Dishwasher / User’s Manual 25/52 EN

 Preparation
Collapsible upper basket Height setting with empty
wires basket
(depends on model) (depends on model)
You can use collapsible wires when you need In this model, the height setting of the upper
a larger space for your dishes in the upper basket may be changed using the wheels
basket of your machine. which are mounted at two different heights.
To bring the collapsible wires into horizontal Release the latches on both the right and
position, grab the wire from the middle left tracks of the upper basket by pushing
position and push them in the direction of them outwards.
arrow in the figure. Place your larger dishes Pull the basket out completely.
into the area created. To bring the wires back Place the basket back into the tracks at the
to vertical position, just lift them up. desired height.
Push the latches back into the correct
position.

C
Bringing the wires to the
horizontal position by holding
them from the tips may cause
them to bend. Therefore, hold
the wires from their stems while
bringing them to the horizontal
or vertical positions.

26 /52 EN Dishwasher / User’s Manual

Preparation
Ceiling cutlery basket
(depends on model)
Ceiling cutlery basket is designed to wash
your cutlery items such as forks, spoons and
etc. by placing them between the bars on
the basket.

When the central tray is in the lower

position, you can load long/high items such
as coffee cups, ladles, etc. on the tray. When
the side trays lean on two side walls, the
handle can be pulled to allow the central tray
1 to rise and the system to be locked.

Ceiling cutlery basket

In models with partial movement feature, (depends on model)
pushing the bar (1) on the handle enables Ceiling cutlery basket is designed to wash
the central tray of the basket to get to your cutlery items such as forks, spoons and
the lower position and the system gets etc. by placing them between the bars on
unlocked. Thus right and left side trays can the basket.
be used as moving parts.
The free space enabled by the side trays
allows long parts to be loaded in the upper
basket.

Dishwasher / User’s Manual 27/52 EN

 5 Operating the product
1 2 3 4 5 6 7

9 8
1. On / Off Key 8. Function Selection Keys
2. Remote Control function F1 TrayWash Function
3. Menu Key F2 Fast+ Function
4. Time Delay Selection / Menu Direction Selection Keys F3 SteamGloss Function
5. Selection / Confirmation Key F4 Super Rinse Function
6. Display F5 Half Load function
7. Start / Pause / Cancel Key 9. Programme Selection Keys
10 11 12 13 14 15 16 17

24 23 22 21 20 19 18

10. Tablet Detergent Indicator (depends on the model)

11. Liquid Detergent Dosing Indicator (depends on the model)
12. Auto Door Open Indicator (depends on the model)
13. Filter Cleaning Function Indicator (depends on the model)
14. IonGuard Function Indicator (depends on the model)
15. Delay Time / Programme Time Indicator
16. Delayed Start Indicator
17. End of Programme Indicator
18. Rinse Aid Indicator
19. Salt Indicator
20. Water Cut-off Indicator
21. Sound Settings Menu Indicator
22. Water Hardness Settings Menu Indicator
23. HomeWhiz Indicator
24. HomeWhiz Setting Indicator

28 /52 EN Dishwasher / User’s Manual

Operating the product
On/Off Key Programme selection
When you press the On/Off key, the indicator 1. Press the On/Off button to turn on your
lights illuminate on the display for ON machine.
position. The lights turn off in OFF position.
2. Check the Salt and Rinse Aid indicators
Programme Selection / and add salt and/or rinse aid if needed.
Programme Cancel key 3. Refer to the table of "Programme data
Select the desired programme using the and average consumption values"
“programme selection keys” and press the to determine a washing programme
button. suitable for your dishes.
To cancel the running programme, open the 4. Selected programme will start when you
door of the machine and press and hold the close the door of your machine.
Programme Start/Pause/Cancel key for 3
seconds.
After the 3 - 2 - 1 countdown, 0:01 is
displayed, close the door of the product
and wait for the draining process complete.
Draining is completed in 2 minutes and the
machine gives an audible warning when it is
completed.
Function Keys
If you press any of the Function keys
during programme selection or time delay
selection, an affirmative key signal will be
heard provided that the relevant function
is supported by the selected programme.
Function will be deemed selected when the
indicator of the selected function is lit.
To cancel the selected function, keep the
function key pressed until the function
indicator disappears.
Preparing the machine
1. Open the door of the dishwasher.
2. Place the dishes in accordance with the
instructions in the user manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent into
the detergent dispenser.

Dishwasher / User’s Manual 29/52 EN

 Programme Table
Programme number 1 2 3 4 5 6 7 8 9

30 /52 EN
Downloaded
Programme name Auto AquaFlex Intensive Eco * GlassCare Quick&Shine Mini Prewash Program
(Infintity)
Cleaning temperature 40-65 ºC - 70 ºC 50 ºC 40 ºC 60 ºC 35 ºC - -
Determines the It is the most Suitable for Most Special Daily washing Suitable for Suitable for Please see the
soiling degree of suitable washing heavily soiled economical programme for programme for lightly soiled removing the table on the
the dishes and programme for dishes, pots and washing gentle cleaning normally soiled daily dishes that remnants on the other page for
Operating the product

sets the daily mixed pans. programme for of delicate dishes in the are scraped or soiled dishes programmes
temperature and dishes including the medium glassware. fastest way. pre-cleaned. that will be kept you can
amount of the plastic items. soiled daily waiting in the download
washing water While delicate dishes that are machine for a through wireless
as well as the glass items are kept waiting. few days, and connection.
washing time washed in the thus, for
automatically. upper basket, preventing the
Degree of Soiling Suitable for all pans and trays bad odour
types of dishes. can be washed buildup.
in the lower
basket.

Medium to high Medium High Medium Low Medium Low - -

Prewash + + + + + - - + -
Wash + + + + + + + - -
Dry + + + + + + - - -

Duration (min) 112-180 203 170 245 120 58 30 15

Water (I) 9,4-12,4 19 16,8 9,5 13,6 10,6 10,8 4

Energy (kWh) 0,90-1,45 1,53 1,51 0,94 1,20 1,18 0,80 -

The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions. *

Dishwasher / User’s Manual

Reference programme for testing institutes. The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full
rinse aid reservoir, and using the test programme.
 Downloaded Program ( Infintity )
Programme number 1 2 3 4

Programme name Baby Protect Clean&Shine SilentWash InnerClean

Cleaning temperature 70 ºC 65 ºC - -
Suitable for the dishes Daily washing programme It is the daily washing This programme is
which require extra hygiene for normally soiled dishes. programme to wash the recommended to be
such as articles for babies. normally soiled left dishes operated on every 1-2
Operating the product

Dishwasher / User’s Manual

Also suitable for heavily in the most silent way. months for machine
soiled dishes. cleaning and
necessary hygiene.
The programme
Degree of Soiling should be operated
while the machine is
empty.
In order to achieve
an efficient result
use together with
special machine
High Medium Medium -
Prewash + - + -
Wash + + + -
Dry + + + -

Duration (min) 112-180 203 170 245

Water (I) 9,4-12,4 19 16,8 9,5

Energy (kWh) 0,90-1,45 1,53 1,51 0,94

31/52 EN
#
 Operating the product
Auxiliary functions TrayWash Function
Washing programmes of your dishwasher Select Intensive 70°C programme and press
are designed to obtain the best cleaning function key to run this function.
effect, considering the type of the soiling, SteamGloss Function
soiling degree and properties of the dishes It provides superior drying performance.
to be washed. Super Rinse Function
Auxiliary functions allow you save from time, Depending on the type of the detergent
water and power. used, if a detergent dissolving issue is

C
Auxiliary functions may cause encountered it will remove the resulting
changes in the programme stains from the dishes and enables the
duration. optimum rinsing performance.

C
Auxiliary functions are not Floor illumination
suitable for all washing Warning to show that machine is
programs. Indicator of the in washing phase
auxiliary function that is not (depends on the model)
compatible with the programme Your machine reflects a light to the floor
will not be active. during the washing process. This light turns
off after the washing process is complete.
Half Load function

C
It is used to operate the machine without Floor illumination is activated
loading it completely. automatically when the washing
1. Load your dishes in the machine as you programme starts and remains lit
like. until the end of the programme.

C
2. Turn the machine on with On/Off key. Floor illumination cannot be
3. Select the desired programme and press cancelled by the user.
the Half Load key.
While the function is active, the selection Functions Under the Settings
indicator on the selected function key will Menu
become on. (depends on the model)
4. Close the door of the machine to start Under the settings menu of your product,
the programme. there are some additional functions that
depend on the model.

C
With the Half Load function you To access these functions, press and hold
can save both water and power the Menu key for 3 seconds. Use <- and +>
while using the lower and upper to proceed to the desired function or setting.
baskets of the machine. Use the selection key to change the desired
Fast+ Function function or setting and press the Menu key
It shortens the time of the washing cycle to exit the Settings menu.
selected and decreases water consumption
by enabling washing under higher pressure.

32 /52 EN Dishwasher / User’s Manual

Operating the product

C
The function indicator will Liquid Dosing Function Off / On
light up even if the functions
activated on the settings menu
are not active in the selected
washing programme.
Submenu Functions:
(depends on the model)
Doormatic Function Off/On
Liquid Dosing Function detergent use
setting:
Level 1: 10 cc lower than the default value
Level 2: 5 cc lower than the default value
Level 3: Use the default detergent amount
determined by the programme.
Level 4: 5 cc higher than the default value
Level 5: 10 cc higher than the default value
Detergent Tablet Function Off/On

EverClean Function Off/On

IonGuard Function Off/On

Dishwasher / User’s Manual 33/52 EN

 Operating the product
Interior Lighting programme until 24 hours.
(Depends on the model) 1. Press the Time Delay function key after
Some models have interior lighting to selecting the washing programme and
illuminate the interior when the door is other auxiliary functions.
opened. 2. Once you press the Time Delay key,
Changing the interior lighting Display Information Line will show
setting "0:30" and Time Delay indicator will start
1. After switching on your machine, press flashing.
the Menu key for 1 second.
3. Set the desired time by pressing the
2. Press <- and +> to proceed to “L:” on Time Delay key. Time will increase with
the display. Select the position you want increments of 30 minutes up to 6 hours
with the Selection key. Interior lighting and after that in 1 hour increments up to
is off in “L:0” position and on in “L:1” 24 hours every time you press the key.
position.
4. Close the door of your machine after
3. Press the Menu key to exit the settings setting the Delayed Start. Once
menu. Your setting will be saved the delay time is over, the selected
automatically. programme will start automatically.
Tablet detergent function Changing the settings while Time
Allows to obtain a better drying performance Delay function is active
from the multi-purpose detergents called as While the Time Delay function is activated,
all in one detergents such as 2in1, 3in1, 4in1, you cannot make changes in the washing
5in1 and etc., depending on the hardness programme, auxiliary functions or the
level of the tap water. duration of delay time.

C C
If you have used the Tablet Programme and auxiliary
features during the last washing functions cannot be set/
programme you used, Tablet changed after the programme
function will remain active in the has started.
next washing programme you
To cancel the Time Delay function
will select.
Open the door of the product Press and

C
Tablet Detergent function may hold the Programme Selection / Programme
cause change in the programme Cancel keys for 3 seconds. After the 3 - 2 - 1
duration. countdown, 0:01 is displayed, close the door
of the product and wait for the draining
Scheduling the washing process complete. Draining is completed in
time 2 minutes and the machine gives an audible
Time Delay warning when it is completed.

C
If an economical electricity tariff is applied You can select and start a
in your region, you can use the Time new programme following
Delay function to wash your dishes during the cancellation of Time Delay
appropriate hours. function.
You can delay the start of the selected

34 /52 EN Dishwasher / User’s Manual

Operating the product

C C
Time Delay function cannot be There might be residues of
set after the programme starts. detergent or rinse aid in the
machine and/or on the pieces
being washed depending on the
Starting the programme step the programme you have
Close the door of your machine to start it cancelled was in.
after selecting the programme and auxiliary
functions. Salt indicator ( )

C
Your machine performs water Please check the salt indicator on the display
softening depending on the to see whether there is adequate amount
hardness level of the supply of softening salt in the dishwasher or not.
water. Washing time can You need to refill the salt reservoir with
change while the programme salt whenever salt indicator appears on the
is running depending on the display of your machine.

C
ambient temperature where Adjusting the water hardness
your machine is installed, level is explained in Water
temperature of the supply water Softening System section.
and amount of the dishes.

C
Pay attention not to open the Rinse Aid indicator ( )
door of the machine when it is Please check the rinse aid indicator on the
running. There may be a rush of display to see whether there is adequate
vapour when you open the door amount of rinse aid in the dishwasher or
of your machine; be careful. not. You need to refill the rinse aid reservoir

C
The machine will remain silent with rinse aid whenever rinse aid indicator
in pause mode for some time appears on the display of your machine.
in order to remove the water
from the machine and on the Adjusting the amount of
dishes completely and to have rinse aid
the water softener cleaned, and 1. After switching on your machine, press
then it will resume running in the Menu key for 1 second.
drying mode.
2. Using <- and +> keys, proceed to “P:” on
the display.
Cancelling the programme
3. Set to the appropriate level with the
Open the door of the product Press and Selection key.
hold the Programme Selection / Programme
Cancel keys for 3 seconds. After the 3 - 2 - 1 4. Press the Menu key to exit the settings
countdown, 0:01 is displayed, close the door of menu. Your setting will be saved
the product and wait for the draining process automatically.
complete. Draining is completed in 2 minutes
and the machine gives an audible warning
when it is completed.

Dishwasher / User’s Manual 35/52 EN

 Operating the product
No rinse aid dispensed in P:0 wash position. Water cut-off warning
1 dose of rinse aid is dispensed in P:1 If mains water is cut or water inlet tap is
position. turned off the machine cannot take water
2 doses of rinse aid are dispensed in P:2 in and E:02 icon will flash on the programme
position. indicator. As long as the problem continues,
3 doses of rinse aid are dispensed in P:3 washing programme is paused and the
position. water inlet is checked regularly by the
4 doses of rinse aid are dispensed in P:4 machine; when the water is restored E:02
position. icon will disappear after a while and the
washing programme resumes.
End of programme Overflowing warning

C
When the programme you have If the machine intakes too much water or
selected comes to an end, an there is leakage at any of the components
audible warning signal will warn then the machine will detect this and E:01
you to turn off your machine. icon will flash on the Programme indicator.
This audible signal will warn you As long as the overflowing continues safety
with certain intervals before it algorithm will be active and try to discharge
turns off. the water. If overflowing stops and safety is
assured, E:01 icon will disappear. If E:01 does
End of Programme indicator will light up
not disappear, there is a permanent fault. In
when the washing programme is over.
this case the authorised service should be
1. Open the door of the machine.
contacted.
2. Press On/Off key to turn off your
machine.
3. Close the tap.
4. Unplug the machine from the socket.

C
For energy saving, the machine
is automatically turned off
following the completion of the
programme or if the programme
is not started.

C
Leave your dishes in the machine
for about 15 minutes to allow
them cool down after they are
washed. Your dishes will dry in a
shorter time if you leave the door
of your machine ajar during this
period. This process will increase
the drying effectiveness of your
machine.

36 /52 EN Dishwasher / User’s Manual

5 HOMEWHIZ FUNCTION
You can check your dishwasher and learn HomeWhiz Setup and User
about its status via your smart device with Account Settings
the HomeWhiz function.
Install the HomeWhiz application from the

C HomeWhiz only runs on a

frequency band of 2.4GHz.
application store of your smart device to use
the WLAN function of your machine. Make
sure that your smart device is connected to

C
You can use your machine via the internet to use the application.
your smart device while the If you are using the application for the first
function is selected. You can time, complete the registration process with
monitor your machine through your e-mail address on the application. Once
the application when the you've completed the registration process,
function is not selected. you can use all HomeWhiz supported
appliances in your house through this

C
You can check the indicator on
the product to see if the function account.
is enabled or not. You can tap "Add/Remove Appliance"
If the function is disabled, the under the "Appliances" section to see the
HomeWhiz indicator will be off appliances paired with your account. You can
or continuously flash at short perform the user pairing processes of these
intervals. For example, when the appliances from this page.
wireless connection setting is Initial setup
off or the door of the machine is 1 Tap "Add/Remove Appliance" section on
open. the HomeWhiz application.

C
The function will be disabled 2 Tap "Tap here to setup a new appliance".
when the door of the 3. When the machine is off, press the
dishwasher is open or when on/off key and the remote control key
operations regarding On/Off are simultaneously to enter the settings
performed on the machine. It menu. Press the setting key to set the
can be enabled again with the product to “wireless connection setup”.
remote control key. 4. Then, in the settings section of your
smart device, connect to “HomeWhiz
xxx-xxxx” network under the wireless
connection settings. Password of the
network can be seen on the HomeWhiz
application.
5. Connect your smart device to the
The display when HomeWhiz is enabled. HomeWhiz network and return to
the HomeWhiz application. On the
application, you can see the dishwasher
you are adding. Tap Next to proceed to
the next step.

Dishwasher / User’s Manual 37/52 EN

 HOMEWHIZ FUNCTION

C
6. Select the network to which you want If the account you have logged
to connect your dishwasher and enter on is the one to which you have
the password. added appliance(s) before, you
7. While the dishwasher is connecting to can start using your dishwasher
the selected network, you will see the directly after logging in.
HomeWhiz icon ( ) flashing. Once the
connection has been established, the Follow the steps below to use
said icon will become on permanently. an already setup dishwasher
through a new account.
8. Once your dishwasher is connected 1. Create a new account and use this
to the selected network, you need to account to log into the HomeWhiz
connect to the same network on your application. Make sure that your smart
smart device. If your smart device does device and dishwasher are connected to
not get connected automatically, go the same network.
to its settings and connect it to the
network to which your dishwasher is 2. Tap “Add/Remove Appliance” on
connected. the Products page. You can see the
appliance and the user it belongs to
9. Return to the HomeWhiz application under “Other Appliances” tab.
and give a name to your dishwasher.
This is the last step. You can see your 3. Tap (+) next to the dishwasher you
product on the “Products” page. want to add and give a name to the
appliance.
10. Once the setup of the dishwasher
has been performed successfully, the 4. Your request to add the appliance will
product will show the main screen be sent to its owner via e-mail. You can
automatically and return to the use start to use the appliance jointly once
mode. the owner confirms your request.

C
11. If the setup has failed, or if it could not Your smart device and
be completed within 5 minutes in the dishwasher do not need to be
setup mode, the HomeWhiz icon will go connected to the same network
off and the product will switch to the off once the setup processes are
mode. To perform setup again, please complete. You can use your
repeat the steps starting from step 1. appliance as long as your smart
device is connected to the
Using the dishwasher on more internet.

C
than one device You can tap "Add/Remove
You can use your dishwasher on more than Appliance" under the
one smart device. Install the HomeWhiz "Appliances" section to see the
application on the other smart device to use appliances paired with your
this feature. You need to log in with your account. You can perform the
account upon launching the application. user pairing processes of these
appliances from this page.

38 /52 EN Dishwasher / User’s Manual

HOMEWHIZ FUNCTION
HomeWhiz on/off connection indicator will light permanently;
Press the remote control key to enable the if it is off, the wireless connection indicator
function. will flash at short intervals.

Once the wireless connection has been

turned “On”, your machine will connect
to the home network by using the setup
settings you made before.
Deleting the HomeWhiz settings
The display when HomeWhiz is enabled. When the dishwasher is on, press and hold
If you press the remote control key while the remote control and menu direction keys
the function is enabled, the Home Whiz (-) for 5 seconds. After the countdown 5 - 4 -
function will be disabled, and the product 3 - 2 - 1, your settings will be deleted.
indicator will return to the delay time/ HomeWhiz on/off
programme time display. In the off position, Press the remote control key to enable the
the HomeWhiz key LED will go off. function.

C
You can check the indicator on
the product to see if wireless
connection is enabled or not.
If the wireless connection is off,
you can see that the HomeWhiz
icon is off.
If the HomeWhiz icon is on, The display when HomeWhiz is enabled.
this means that the wireless If you press the remote control key while the
connection of the product is on function is enabled, the Home Whiz function will
and the product is connected be disabled, and the product indicator will return
to the wireless network. If the to the delay time/programme time display. In the
HomeWhiz icon is continuously off position, the HomeWhiz key LED will go off.

C
flashing at regular intervals, this You can check the indicator on
means that it is enabled but the product to see if wireless
could not connect or is trying to connection is enabled or not.
connect the network. If the wireless connection is off,
you can see that the HomeWhiz
Wireless connection on/off
icon is off.
While your machine is on, press the “Menu”
If the HomeWhiz icon is on,
key for 1 second to enter the settings menu.
this means that the wireless
Follow the screen and press <- and +> keys
connection of the product is on
on the panel, then wait until the wireless
and the product is connected
connection indicator comes on. Press the
to the wireless network. If the
selection key and if the wireless connection
HomeWhiz icon is continuously
is on, turn it off; if it is off, turn it on. In the
flashing at regular intervals, this
wireless connection on/off settings menu,
means that it is enabled but
if the wireless connection is on, the wireless
could not connect or is trying to
connect the network.
Dishwasher / User’s Manual 39/52 EN
 HOMEWHIZ FUNCTION
Wireless connection on/off Changing the Downloaded
While your machine is on, press the “Menu” key Program
for 1 second to enter the settings menu. Follow You can use the HomeWhiz application to
the screen and press <- and +> keys on the change the Downloaded Programme, which
panel, then wait until the wireless connection is the last program on the product.
indicator comes on. Press the selection key and You can check the Table of Program Data
if the wireless connection is on, turn it off; if itand Average Consumption Values
is off, turn it on. In the wireless connection on/ to see what the downloaded programs
off settings menu, if the wireless connection is might be and the default Downloaded
on, the wireless connection indicator will light Program.
permanently; if it is off, the wireless connection To change the Downloaded
indicator will flash at short intervals. Program:
•• Connect to your product on the
Once the wireless connection has been turned HomeWhiz application.
“On”, your machine will connect to the home •• Turn on the Remote Control function
network by using the setup settings you made for the product.
before. •• Go to the settings page of the product
Deleting the HomeWhiz settings on the HomeWhiz application.
When the dishwasher is on, press and hold the •• On the settings page of the product,
remote control and menu direction keys (-) for proceed to the Download Program
5 seconds. After the countdown 5 - 4 - 3 - 2 - 1, page.
your settings will be deleted. •• On the Download Program page,
HomeWhiz troubleshooting select a program to download on your
Follow these instructions if you encounter a product.
control or connection problem. If it persists, take •• Select the desired program on the
the next step. Download Program page, and press
1. Check if your smart device is connected to Download Program on the HomeWhiz
the internet. application.
•• While the program is being
2. Close the HomeWhiz application on your
downloaded, you will see an animation
smart device and start it again.
on the program and HomeWhiz
3. Restart your smart device. application.
4. Check the wireless connection status •• Once the download procedure is
of your dishwasher. If you see "WLAN: complete, you can select and install the
Off", switch it to "WLAN: On" and wait for Downloaded Program on the product or
the machine to connect. Then close the the HomeWhiz application.

C
HomeWhiz application on your smart device You can check the Table of
and start it again. Program Data and Average
5. If the connection cannot be established Consumption values to see the
following the instructions above, repeat the programs you can download on
initial setup settings on the appliance. your product.
6. If the problem persists, contact the
authorised service.
40 /52 EN Dishwasher / User’s Manual
HOMEWHIZ FUNCTION

C
If you download another
program on the product, your
previous selection will be
cancelled.

C
You can download as many
programs as you wish on
the product, and change the
Downloaded Program whenever
you want. You just need to make
sure that your smart device and
product are connected to the
internet and the Remote Control
function of the product is turned
on.

Dishwasher / User’s Manual 41/52 EN

 6 Maintenance and cleaning
Service life of the product extends and Cleaning the filters
frequently faced problems decrease if it is Clean the filters at least once a week in order
cleaned at regular intervals. for the machine operates efficiently. Check if

A
Unplug the product and turn off food residues are left on the filters. If there
the tap before attempting any are food residues on filters, take them out
cleaning procedures. and clean well under running water.
1. Turn the micro filter (1) and coarse filter

C Do not use abrasive substances

for cleaning.
(2) assembly counter clockwise and pull
it out from its seating.

C
Clean the filter and impellers at
least once a week in order for the
machine operates efficiently.

Cleaning the outer surface

of the product
Wipe the outer surface and door gaskets
of the product gently with a mild cleaning
material and damp cloth. Wipe the "Control
panel" only with a slightly damp cloth.
Cleaning the interior of the 2. Pull out the metal/plastic filter (3) from
machine the seating.
•• Clean the interior of the machine and
the tank by running a programme with
or without detergent based on the
degree of soil.
•• If water has remained in the machine,
drain the water by performing the
procedures under the topic "Canceling
a programme". If the water cannot
be discharged, remove the filters
as specified in the "Cleaning the
filters" section and check if there
are any leftover deposits that have
3. Press the two pawls on the coarse filter
accumulated at the bottom of the
inwards and separate the coarse filter
machine, blocking the water path. Clean
from the assembly.
if necessary.

42 /52 EN Dishwasher / User’s Manual

Maintenance and cleaning
Cleaning the hose filter
Damages on the machine that may be
caused by impurities coming from the urban
supply water or your own water installation
(such as sand, dirt, rust, etc.) can be
prevented by means of the filter attached to
the water inlet hose. Check the filter and the
hose regularly and clean them if necessary.
1. Turn off the tap and remove the hose.
4. Clean all three filters under tap water by 2. After taking out the filter, clean it under
means of a brush. running tap water.
5. Place the metal/plastic filter. 3. Place the cleaned filter back to its seat
6. Place the coarse filter into the micro in the hose.
filter. Make sure that it is properly 4. Install the hose to tap.
seated. Turn the coarse filter clockwise
until a "click" sound is heard. (depends on model)

C Do not use the dishwasher

without filter.

C Incorrect placement of the filters

will reduce washing efficiency.

Dishwasher / User’s Manual 43/52 EN

 Maintenance and cleaning
Cleaning the impellers Upper impeller
Clean the impellers for the machine to work Check if the holes on the upper impeller (1)
efficiently. are clogged. If they are clogged, remove
and clean the impeller. Turn its nut to left to
remove the upper impeller.
Make sure that the nut is tightened well
when installing the upper impeller.

A
Do not try to rotate the impeller
by holding its ends. Trying to
rotate the end sections may
cause the gear system within
the impeller to break.

Lower impeller assembly

C
If the washing performance
decreases, check if the holes
on the lower impeller assembly
are clogged. If they are clogged,
remove and clean the impeller
assembly.

To remove and clean the lower impeller

assembly together, hold by one hand from
the (C) points shown in the figure and pull up
to remove. After cleaning, follow these
steps in reverse order to reinstall the
impeller assembly.

44 /52 EN Dishwasher / User’s Manual

7 Troubleshooting
Machine does not start.
• Power cable is unplugged. >>> Check if the power cable is plugged in.
• Fuse is blown. >>> Check the fuses in your house.
• Water is cut. >>> Make sure that the water inlet tap is open.
• Door of the machine is open. >>> Make sure that you have closed the door of the
machine.
• On / Off button is not pressed. >>> Make sure that you have turned on the machine by
pressing the On / Off button.
Dishes are not washed clean
• Dishes are not placed orderly in the machine. >>> Load the dishes as described in the
user manual.
• Selected programme is unsuitable. >>> Select a programme with a higher temperature
and cycle time.
• Impellers are stuck. >>> Prior to starting the programme, turn the lower and upper
impellers by hand to make sure that they rotate freely.
• Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged with
food remnants such as lemon pips. Clean the impellers regularly as illustrated in section
“Cleaning and Care”.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system
regularly as illustrated in section “Cleaning and Care”.
• Filters are installed incorrectly. >>> Check the filter system and make sure that it is
installed correctly.
• Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.
• Detergent is stored under unsuitable conditions. >>> If you are using powder detergent,
do not store the detergent package in humid places. Keep it in a closed container if
possible. For ease-of-storing, we recommend you to use tablet detergents.
• Detergent is not sufficient. >>> If you are using powder detergent, adjust the amount of
detergent according to the soiling degree of your dishes and/or programme definitions.
We recommend you to use tablet detergents for optimum results.
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
• Detergent dispenser lid is left open. >>> Make sure that the detergent dispenser lid is
closed tightly after adding detergent.
Dishes are not dry at the end of cycle
• Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no
water will accumulate in them.

Dishwasher / User’s Manual 45/52 EN

 Troubleshooting

• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
• Machine is unloaded right after the programme is over. >>> Do not unload your machine
right after washing process is completed. Slightly open the door and wait for evacuation
of the steam inside for a while. Unload the dishes after the pieces cool down to a
touchable level. Start unloading process from the lower basket. Thus, dropping of water
remained on a piece at upper basket onto the pieces at lower basket is prevented.
• Selected programme is unsuitable. >>> Since rinsing temperature is low at programmes
with short duration, drying performance will also be low. Select programmes with longer
duration for a higher drying performance.
• Surface quality of the kitchen utensils is deteriorated. >>> Desired washing
performance can not be obtained on kitchen utensils with deteriorated surfaces and it
is not suitable to use such utensils in terms of hygiene as well. Also, water can not flow
easily on deteriorated surfaces. It is not recommended to wash such kitchen utensils in
dishwasher.

C
It is normal that drying complaints can be experienced with Teflon kitchen
utensils. It is associated with the structure of Teflon. Since the surface tensions
of Teflon and water are different, water droplets will remain as beads on the
Teflon surface.
Tea, coffee or lipstick stains remain on dishes.
• Selected programme is unsuitable. >>> Select a programme with a higher temperature
and cycle time.
• Surface quality of the kitchen utensils is deteriorated. >>> Tea and coffee stains
or other dye spots may not be cleaned in dishwasher when they have penetrated in
deteriorated surfaces. Desired washing performance can not be obtained on kitchen
utensils with deteriorated surfaces and it is not suitable to use such utensils in terms of
hygiene as well. It is not recommended to wash such kitchen utensils in dishwasher.
• Detergent is stored under unsuitable conditions. >>> If you are using powder detergent,
do not store the detergent package in humid places. Keep it in a closed container if
possible. For ease-of-storing, we recommend you to use tablet detergents.
Lime traces remain on dishes and glassware gains a misty appearance
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
• Water hardness setting is low or salt level is insufficient >>> Measure the hardness of
the supply water appropriately and check the water hardness setting.
• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while
adding salt. Make sure that the salt reservoir lid is tightly closed after finishing the filling
process. Run the prewash programme to remove the salt that spilled inside the machine.

46 /52 EN Dishwasher / User’s Manual

Troubleshooting
Since the salt granules that will remain under the lid will dissolve during prewash, causing
the lid loosen, check the lid once again at the end of the programme.
There is a different odour in the machine

•
C A new machine has a peculiar odour. It will fade out after a couple of washes.

Filters are clogged. >>> Check if the filter system is clean. Clean the filter system
regularly as illustrated in section “Cleaning and Care”.
• Dirty dishes are kept in dishwasher for 2-3 days. >>> If you are not going to start the
machine right after you have put the dishes into it, remove the remnants on the dishes
and run the Prewash programme without detergent every 2 days. In such cases, do not
close the door of the machine completely in order to avoid odour build up in machine. You
can also use commercially available odour removers or machine cleaners.
Rust, discoloration or surface deterioration occurs on dishes
• Salt leakage exists. >>> Salt may cause deterioration and oxidation on metal surfaces.
Pay attention not to spill salt around the salt filling hole while adding salt. Make sure that
the salt reservoir lid is tightly closed after finishing the filling process. Run the prewash
programme to remove the salt that spilled inside the machine. Since the salt granules
that will remain under the lid will dissolve during prewash, causing the lid loosen, check
the lid once again at the end of the programme.
• Salty food remnants have remained on dishes for a long time. >>> If cutlery soiled with
such foods will be kept waiting in machine, dirt must be removed by prewash or dishes
must be washed without being kept waiting.
• Electric installation is not grounded. >>>Check if your machine is connected to the actual
grounding line. Otherwise, the static electric created in the product causes arcs on the
surfaces of metal items creating pores, removing the protective cover on the surface and
causing discoloration.
• Intensive cleansers such as bleaches are used. >>> Protective cover on metal surfaces
gets damaged and looses its efficiency in time when it gets in contact with cleansers
such as bleach. Do not wash your dishes with bleach.
• Metal items particularly knives are used for purposes other then their intended uses.
>>> Protective cover on the edges of knives may get damaged when they are used for
purposes such as opening cans. Do not use metal kitchen utensils out of their intended
uses.
• Cutlery are made of low quality stainless steel. >>> Corrosion on such items is inevitable;
they should not be washed in dishwashers.
• Kitchen utensils that are already corroded are washed in dishwasher. >>> Rust on a
corroded item can migrate to other stainless steel surfaces and cause corrosion on those
surfaces as well. Such items should not be washed in dishwashers.

Dishwasher / User’s Manual 47/52 EN

 Troubleshooting

Detergent remains in detergent dispenser.

• Detergent dispenser was damp when adding detergent. >>> Make sure that the
detergent dispenser is dried well prior to filling it with detergent.
• Detergent is added long before the washing process. >>> Pay attention to add detergent
shortly before start-up of the washing.
• Opening of the detergent dispenser lid is prevented during washing. >>> Place the
dishes in a way that will not prevent the detergent dispenser lid from opening and the
water going into the machine from impellers.
• Detergent is stored under unsuitable conditions. >>> If you are using powder detergent,
do not store the detergent package in humid places. Keep it in a closed container if
possible. For ease-of-storing, we recommend you to use tablet detergents.
• Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged with
food remnants such as lemon pips. Clean the impellers regularly as illustrated in section
“Cleaning and Care”.
Decorations and ornaments on kitchen utensils are being erased.

C
Decorated glasses and decorated lustre porcelains are not suitable for washing in
the dishwasher. Manufacturers of some glassware and porcelain tableware items
do not recommend washing such kitchen utensils in the dishwashers either.
Dishes are scratched.

•
C Kitchen utensils that contains or are made of aluminium should not be washed in
dishwasher.
Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while
adding salt. Spilled salt can cause scratches. Make sure that the salt reservoir lid is tightly
closed after finishing the filling process. Run the prewash programme to remove the salt
that spilled inside the machine. Since the salt granules that will remain under the lid will
dissolve during prewash, causing the lid loosen, check the lid once again at the end of the
programme.
• Water hardness setting is low or salt level is insufficient >>> Measure the hardness of
the supply water appropriately and check the water hardness setting.
• Dishes are not placed orderly in the machine. >>> When placing the glasses and other
glassware into the basket lean them not against other dishes but the edges or racks of
the basket or the glass support tines. Striking of the glasses to each other or to other
dishes due to the impact of water during washing can cause breaks, or scratches on their
surfaces.

48 /52 EN Dishwasher / User’s Manual

Troubleshooting

A smear remains on glasses that resembles milk stain which can not be
removed when wiped by hand. A bluish / rainbow appearance occurs when
the glass is pointed to light.
• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when
adding rinse aid.
• Corrosion has occurred on glass due to soft water. >>> Measure the hardness of the
supply water appropriately and check the water hardness setting. If your supply water is
soft (<5 dH), do not use salt. Choose programmes that wash in higher temperatures (e.g.
60-65°C). You can also use glass protective detergents that are commercially available.
Foam forms in the machine.
• Dishes are washed with hand-wash detergent by hand but not rinsed before placing
them into the machine. >>> Hand-wash detergents do not contain antifoam. There is
no need to hand-wash the dishes before placing them into the machine. Removing the
coarse soil on the dishes under tap water, with a tissue paper or fork will be sufficient.
• Rinse aid has spilled into the machine when adding rinse aid. >>> Take care that rinse
aid is not spilled in the machine when you are filling it. Clean any spilled rinse ait with the
help of a tissue paper/towel.
• Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse aid
reservoir is closed after adding rinse aid.
Kitchen utensils are broken.
• Dishes are not placed orderly in the machine. >>> Load the dishes as described in the
user manual.
• Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.
Water remains in the dishwasher at the end of the programme.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system
regularly as illustrated in section “Cleaning and Care”.
• Discharge hose is clogged/blocked. >>> Check the discharge hose. If necessary, remove
the discharge hose, clear the blockage and insert is as illustrated in the user manual.

C
If you cannot eliminate the problem although you follow the instructions in this
section, consult your dealer or the Authorised Service Agent. Never try to repair a
nonfunctional product yourself.

Dishwasher / User’s Manual 49/52 EN

8 Warranty
Dear Customer,

Your Voltas.Beko Dish Washer is covered for a comprehensive warranty of 2 year from date of
purchase and additional 10 year warranty on Motor (2 Year Standard + 10 Year extended only
on Motor only ) irrespective of whether product is in use or not.

Warranty conditions:

• Warranty covers repair or replacement of functional spare parts if needed as a result

of faulty material, defective components or manufacturing defect to make the unit
functional and does not entitle replacement or refund of entire unit, or refund of money.
However, any civil, plumbing or electrical addition / alteration to install, shift the product
will be within the scope of the customer.
• The Company will make their best of efforts to repair or the required parts as and when
required in the best possible time, but will not be bound for repairs within a specified
period of time.
• Any breakage of part, component due to customer handling or accessories external to
the unit will not be in the scope of this warranty.
• Warranty is personal to the original purchaser / customer and is not transferable.
• Customer must produce proof of purchase like original bill/ invoice of the product as and
when required by the service or company personnel. Warranty card alone as proof of
purchase will not make customer eligible for warranty.
• The warranty shall not be applicable if the product has been used for non-residential or
commercial purpose.
• The Company shall not be liable for indirect, incidental, punitive, exemplary,
consequential or damage or loss (including loss of profits, use, goodwill) arising from or
related to this warranty.
• In case the warranty obligation could not be met due to any condition beyond our control,
commercial settlement will be done considering the depreciation value of the product,
based on the purchase date. The Company’s decision in this regard shall be final and
conclusive.
• This Warranty becomes void if there is any unauthorized repair, tampering, alteration,
modification, misuse or damage to the Product.
• Warranty shall not be applicable in case of use of faulty stabilizer or in case of power
surge/fluctuations.
• Repairs required due to corrosion or rust or leaks due to corrosive environment shall not
be covered by this Warranty.
• Terms of this Warranty shall not apply in case the product serial number is removed or
defaced.

50 /52 EN Dishwasher / User’s Manual

Warranty
• This Warranty is not applicable to any defects and damages arising from force majeure
conditions, accident, negligence, misuse, lack of proper care or handling and operation.
• Free installation or demo of the product if applicable can be availed only once within a
month of purchase of the product and any additional installation, re location or demo will
be carried out on chargeable basis.
• Defective parts replaced if any during the warranty period will be taken back by our
service center.
• Services during the warranty period as per conditions mentioned above within municipal
limits of the town/city where our service center is available will be provided free and for
services outside the municipal limits will attract travelling and transportation charges as
applicable.
• In case of any dispute or claims settlement arising out of current warranty will be subject
to jurisdiction of court in Mumbai only.
• The Company assumes no responsibility or liability for its authorized agents or
distributors. No credit or other reimbursement shall be issued for any repair performed
by third parties, including distributors and service centers, other than as specifically
authorized by the Company in writing.
• The Company reserves the right to amend and change the Terms and Conditions of the
warranty anytime.
• Warranty conditions for additional warranty on Motor: Additional warranty is only on
Motor, and will be replaced free of cost if found faulty or defective due to manufacturing
defects. Other charges like visit charges, transportation or labour charges need to be paid
by customer.

Customers are advised to register the product with the Company by contacting the customer
care no --- 18005994444 by providing the purchase data along with customer details like
name, mobile no etc.
For Installation and demo of the product, please contact :
Voltas Beko Customer Care Number : 981899 4444 / 1860 599 4444.
SMS<VB> to 56677 to get a call back from our customer care team
Customer care mail id : [email protected]

Customer Purchase details

Model No. Bill No. : Bill Date : / /

Serial No. Purchased From :
Customer Name, Address & Mobile No.

Registered Office: Voltbek Home Appliances Pvt Ltd

Voltas House – A , Dr. Babasaheb Ambedkar Road, Chinchpokli
Mumbai – 400033 , India
18 7468 0100_AA_vBEKO_E8P_EN/ 23-09-19.(10:02)

Dishwasher / User’s Manual 51/52 EN

Voltas Beko Customer Care Number : 981899 4444 / 1860 599 4444
SMS <VB> 56677
Customer Care Mail ID : [email protected]
Website : www.voltasbeko.com
Facebook: Voltasbeko
Twitter : Voltasbeko

Registered office :
Voltbek Home Appliances Private Limited
Voltas House ‘A’, Dr. Babasaheb Ambedkar Road, Chinckpokli, Mumbai – 400 033