2

2023 AUTOMOTIVE
DYNAMOMETER
PRICE LIST

DYNAMOMETER AND
DIAGNOSTICS TEST EQUIPMENT
 DYNAMOMETER AND DIAGNOSTIC TEST EQUIPMENT

MODEL 224X AUTOMOTIVE CHASSIS DYNAMOMETER

MODEL 224X STANDARD FEATURES AND EQUIPMENT

• Measures unlimited horsepower & torque with • Auto Tie Down Package (straps, ratchets and ground
200mph maximum speed hooks)
• NEW Power Core software suite with WinPEP 8 to • Wheel Chocks
interface (PC, printer, etc. not included) • Installation and operation manuals
• NEW DynoWare RT dynamometer electronics and • Toll-free technical support
hardware • Two Year Warranty and unlimited lifetime technical
• 1 Channel of Automatic Conditions support
Measurement(absolute pressure, air temp, humidity)
• 4 Analog Input Channels for 0-5v sensors (sensors
and cables not included)
Model 224x 25,650.00 USD
$

• 14 expansion ports for DynoWare RT accessories

and DJ-CAN devices
• Air Actuated Brake System
• 10 button sample pendant for software and dyno
control

MODEL 224XLC AUTOMOTIVE CHASSIS DYNAMOMETER

MODEL 224XLC STANDARD FEATURES AND EQUIPMENT

• Measures unlimited horsepower & torque with • Wheel Chocks
200mph maximum speed • Installation and operation manuals
• Eddy Current Load Absorption Unit to perform loaded tests, • Toll-free technical support
including step, sweep, and closed loop • Two Year Warranty and unlimited lifetime
• NEW Power Core Software Suite with WinPEP 8 to interface technical support
(PC, printer, etc. not included)
• NEW DynoWare RT dynamometer electronics and hardware
• 1 Channel of Automatic Conditions Measurement Model 224xLC 40,100.00 USD
$

(absolute pressure, air temp, humidity)

• 4 Analog Input Channels for 0-5v sensors (sensors and
cables not included)
• 14 expansion ports for DynoWare RT accessories and
DJ-CAN devices
• Air Actuated Brake System
• 10 button sample pendant for software and dyno control
• Auto Tie Down Package (straps, ratchets and ground hooks)

All prices subject to change without notification. All prices in U.S. Dollars. Shipping not included.

2191 MENDENHALL DRIVE, NORTH LAS VEGAS, NV 89081 Page 2

 DYNAMOMETER AND DIAGNOSTIC TEST EQUIPMENT

MODEL 424X ALL-WHEEL DRIVE CHASSIS DYNAMOMETER

MODEL 424X STANDARD FEATURES AND EQUIPMENT

• Measures unlimited horsepower & torque with • Air Actuated Brake System
200mph maximum speed • 10 button sample pendant for software and dyno
• Tests vehicles in either two-wheel or all-wheel drive control
modes, bi-directional rotation • Ignition wire inductive tachometer pickup leads
• Above-Ground or Pit installation accessories included • Electronically controlled wheelbase adjustment from
• Consists of two Model 224x chassis dynamometers standard 88” – 130” or optional 98” to 140”
• NEW Power Core Software Suite with WinPEP 8 to • Auto Tie Down Package (straps, ratchets, and ground
interface (PC, printer, etc. not included) hooks)
• NEW DynoWare RT dynamometer electronics and • Wheel Chocks
hardware • Installation and operation manuals
• 1 Channel of Automatic Conditions • Toll-free technical support
Measurement(absolute pressure, air temp, humidity) • Two Year Warranty and unlimited lifetime technical
• 4 Analog Input Channels for 0-5v sensors (sensors and support
cables not included)
• 14 expansion ports for DynoWare RT accessories Model 424x $
63,950.00 USD
and DJ-CAN devices

MODEL 424XLC2 ALL-WHEEL DRIVE CHASSIS DYNAMOMETER

MODEL 424XLC2 STANDARD FEATURES AND EQUIPMENT

• Measures unlimited horsepower & torque with DJ-CAN devices
200mph maximum speed • Air Actuated Brake System
• Tests vehicles in either two-wheel or all-wheel drive • 10 button sample pendant for software and dyno
modes, bi-directional rotation control
• Two Eddy Current Load Absorption Units for performing • Ignition wire inductive tachometer pickup leads
loaded tests, including step, sweep, and closed loop • Electronically controlled wheelbase adjustment from
• Above-Ground or Pit installation accessories included standard 88” – 130” or optional 98” to 140”
• Consists of two Model 224xlc chassis dynamometers • Auto Tie Down Package (straps, ratchets, and ground
• NEW Power Core Software Suite with WinPEP 8 to hooks)
interface (PC, printer, etc. not included) • Wheel Chocks
• NEW DynoWare RT dynamometer electronics and • Installation and operation manuals
hardware • Toll-free technical support
• 1 Channel of Automatic Conditions Measurement • Two Year Warranty and unlimited lifetime technical
(absolute pressure, air temp, humidity) support
• 4 Analog Input Channels for 0-5v sensors (sensors and
cables not included)
• 14 expansion ports for DynoWare RT accessories and
Model 424xLC2 87,600.00 USD
$

All prices subject to change without notification. All prices in U.S. Dollars. Shipping not included.

2191 MENDENHALL DRIVE, NORTH LAS VEGAS, NV 89081 Page 3

 DYNAMOMETER AND DIAGNOSTIC TEST EQUIPMENT

OP T IONAL ACCESSOR IES

ITEM DE TA IL PRICE
Four-post lift used to raise and lower vehicle for use with an above-ground installed
Rotary Four-Post Lift (SM-14L) $
8,500. 00 USD
dynamometer. Lift will also function independently from the dyno.
Necessary when using the four-post lift. Consists of a platform for the rear of the dyno
Above-Ground Platform Kit $
3,000. 00 USD
with a lift interface kit.
Required when installing the dynamometer into a pit/in-ground installation. Covers $
Pit Covers 1,575. 00 USD
open areas exposing the dyno roller only.
2 channel module to measure real-time air/fuel using high-flow pump w/ sample tube $
Air/Fuel Ratio Dual Monitor 1,500.00 USD
or bung. Comes with 1 wideband oxygen sensor. Second sensor not included.
Eddy current absorption unit and all necessary hardware to attach to
$
Eddy Current Load Control roller. Perform loaded tests including step, sweep, and closed loop. (pit or above 16,000. 00 USD
ground)
Includes magnetic base, optical sensor, and reflective tape. Recommended when
Optical RPM Pickup testing diesel engine vehicles. Can also be used for other purposes such as measuring $
400.00 USD
pulley slip.
Analog Sensor Cable Kit (Used for connecting customer supplied 0-5v sensors to Dyno- $
55.00 USD
Ware RT Main Control Module – includes 4 harness kits.)
$
Analog Channel Accessories -14.7-45psi Pressure Sensor Kit (includes 1 sensor and harness) 249. 00 USD
$
0-100psi Pressure Sensor Kit (includes 1 sensor and harness) 299. 00 USD
IR-Temp Sensor Kit Includes 1 0-500F sensor, magnetic base, and mounting stand. $
800.00 USD

PV3-ORPKIT Complete PV3 Off-Road Dealer Tuner Kit : Polaris, Honda, Can-Am, Yamaha, Kawasaki $ 1699. 99 USD

Includes one wideband O2 sensor with twelve-foot harness for use with AFR-2 for dual
O2 Sensor Kit (12ft) $199.00 USD
air/fuel readings.
Includes 34L gas cylinder with regulator. Used to baseline new O2 sensors, compare
$
O2 Sensor Test Gas Kit values with age and determine when to replace. Average test is 10-15 seconds and one 250.00 USD
bottle provides approx 68-min of test time.
Mechanically links 424x or 424xLC2 dynos to eliminate potential speed $
LINX System differentials between dyno rollers. 17,000 USD
UPGRADED CUSH DRIVE LINX: Mechanically links 424x or 424xLC2 dynos to
LINX Atra Flex FULL KIT $
19,900 USD
eliminate potential speed differentials between dyno rollers.
Add to an existing model 224x or 224xLC to gain four wheel drive testing capability.
224xAWD Upgrade Available for pit or above ground installation. Can accommodate 88” to 130” wheelbase. $
41,870. 00 USD
(Optional 98” to 140”)
Extended two-year warranty provides a total 4-Year “bumper to bumper”
2 Year Extended Warranty $
2,500. 00 USD
warranty on all mechanical and electronic parts. *Wear items such as tie-down
straps, O2 sensors, etc. not included*
Extends the length of 424x / 424xLC models to fit vehicles with wheelbases 98” – 140”. The $
424x Wheelbase Extension standard size is 88” – 130”. Available for above-ground and pit models. *Requires specific pit 1,500.00 USD
dimensions for the additional length* Contact Dyno Sales for more details.
Dynojet Factory Representatives will provide Dyno equipment installation and on- $ 2,800~$13,800
On-Site Training & Installation
site Dyno Training. Dynojet operations training packages are also available.
package options USD
**restrictions apply *Only available within the Continental USA & Canada*

Learn how to dyno tune using HP Tuners and SCT Advantage software. Training books
The Tuning School Software Training and online classes are available for Dodge, GM, Ford, and Jeep. Beginner, intermediate, Starting at
and advanced levels. Call for details on private classes, on-site training, and regional $459
seminars.

Receive RPM signal by plugging into cigarette/accessory power port or connect to $

EZ-RPM Module positive/negative battery posts for RPM signal. 700. 00 USD

1- 800-992-3525 - DYNOJET.COM - [email protected] Page 4