Scribd
Upload
91 views1 page

EOT Crane Inspection Checklist

The document is an EOT Crane Inspection Checklist used by Transrail Lighting Ltd. to ensure safety and compliance during crane operations. It includes a series of inspection criteria such as the physical condition of the machine, visibility of SWL, and the condition of the power cable and remote. The checklist is to be filled out by the inspector and includes spaces for remarks and signatures from the operator and HSE officer.

Uploaded by

Gaurav kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
91 views1 page

EOT Crane Inspection Checklist

The document is an EOT Crane Inspection Checklist used by Transrail Lighting Ltd. to ensure safety and compliance during crane operations. It includes a series of inspection criteria such as the physical condition of the machine, visibility of SWL, and the condition of the power cable and remote. The checklist is to be filled out by the inspector and includes spaces for remarks and signatures from the operator and HSE officer.

Uploaded by

Gaurav kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Format No.

EOT CRANE INSPECTION CHECKLIST TRANSRAIL/CONST/HSE/EOT-CHKL/031


Transrail Lighting Ltd. Rev. No: 01
Date: 01.04.2021

Name of Project: Date of Inspection:


Project Loc:
Inspected By:

SN. Description Yes No Remarks

1. Machine should be physically good & should have valid TPI


certificate.
2. SWL should be visible on either side.
3. Wire sling should be free from damage/rust.
4. Ensure Hook latch is available with hook or not?
5. Power cable should be free from defect.
6. Remote should be in good condition.
7. Audible horn should be in working condition.
8. Operator have suitable license/experience certificate.
9. Deflection test should be carried out.
10. Safe access and egress should be provided.

Operator HSE Officer Section/P&M I/C

CONTROLLED
Page no. 1

You might also like