LIFTING PLAN (Below 20Tons)

DESAL AREA PORTABLE

Location WATER TANK A&B, Plan No.
LAYDOWN AREA

Subcontractor SAMSUNG C&T

Erection & Dismantle of
Description of Lifting Activity wind girder, Loadging &
Unloading.

Details of Crane Load Position

Maker & Model (Model No.) LTM 1200-5
Liting Gear
Capacity (Ton) 200 Ton 62.8M + 22M Jib Weight
Max. boom length for Lifting(m) 62.8M + 22M Jib Counter
.52 Tons

Max.Working radius from center of crane(m) 50 m Weight

Object
Counter Weight (Ton) 52 Ton Counter
Weight

Outrigger Length (Full = m) 8.5 m Weight 8.5 m .5 Ton

Out Trigger Met Size (cm X cm) 90x90 52 Tons Total 1.02 Tons
Jib Length (m) and offset Angle (if needed) 50 m
Lifting Gears (Spreader Bar, Sling, Wire, Chain, Shackle, ETC)
1. Hook Block
a) Hook Block Capacity 12.5 Ton b) Total Weight of Hook Block .5 Ton
2. Shackle
a) Shackle Capacity 4.75 Ton b) Q'ty 4 Pcs
b) Total Rigging capacity (a x b) 19 Ton b) Total Weight of Shackles .01 Ton
3. □Sling □Wire □Chain □ETC Safety Factor

a) Breaking Load or WLL/SWL 2 Ton b) Q'ty 4 Pcs

c) Angle (Please check figure 1) : ( 60 ) 1.16 f) Total Weight of Slings .01 Ton
e) Total Rigging capacity (a x b)/c 6.9 Ton Total Lowest Capacity 6.9 Ton
Details of Object Load Position Details of Object Load Position
Weight of Object .5 Ton Size (m x m x m) 3 X1 X1
Weight of Gears (Ton) 0.52 Ton Max. height of lift from ground(m) 20 m
.
Calculation Chart
Total weight 1.02 Ton Max crane capacity at radius 4.3 Ton
Crane Capacity Ratio - Max 80% 23.7% Gears Capacity Ratio (%) - Max 80% 14.8%
Position Name Position Name
Supervisor Chandroth Sijin Crane Operator Surya Bahadur
Rigger Ehsan Ashiq Rigger Ehsan Ashiq
Banksman Jaman Banksman Jaman

Ground Conditions
Have assurances been obtained that the ground can withstand the load? Yes / No
Prepared (In charge person) Name/Signature Ehsan Ashiq 11/2/2023
Approved (CM) Name/Signature Chandroth Sijin 11/2/2023
Obligatory of Attachment #1 Crane position, Weight position, Swing of boom, Working radius, Length of boom,
- Drawings Including; Angle of sling when lifting, Location of lifting lugs, Foundation
Obligatory of Attachment #2
Load Chart, Crane Spec' 6.
- Crane Load Chart

1/7
HIGH RISK LIFTING PLAN (20Tons AND OVER,50M and Higher)
Subcontractor Date of lifting / / 2022
Description of Lifting Activity

Details of Crane Load Position

Maker & Model (Model No.) Counter Weight (Ton)
Capacity (Ton) Outrigger Exended 100%

Max. boom length for Lifting(m) Out Trigger Met Size (cm X cm)
Max. Working radius from center of crane Jib Length (m) and offset Angle (if
(m) needed)

Lifting Gears (Spreader Bar, Sling, Wire, Chain, Shackle, ETC)

1. Hook Block
a) Hook Block Capacity b) Total Weight of Hook Block
2. Spreader Bar (If need)
a) Capacity b) Weight
3. Shackle
a) Shackle Capacity and Q'ty b) Q'ty
e) Total Rigging capacity (a x b) Ton b) Total Weight of Shackles
4. □Sling □Wire □Chain □ETC Safety Factor(BL:6)

a) Breaking Load or WLL/SWL b) Q'ty

c) Angle (Please check figure 1) : ( ) f) Total Weight of Slings
e) Total Rigging capacity (a x b)/c #DIV/0! Total Lowest Capacity #DIV/0!

Details of Object Load Position Details of Object Load Position

Weight of Object Size (m x m x m)
Weight of Gears (Ton) 0.0 Ton Max. height of lift from ground(m)

Calculation Chart
Total weight Ton Max crane capacity at radius
Crane Capacity Ratio (%) - Max 85% 0.0% Gears Capacity Ratio (%) - Max 85% #DIV/0!
Position Name Position Name
Supervisor Crane Operator
Rigger Rigger
Banksman Banksman

Ground Conditions
Have assurances been obtained that the ground can withstand the load? Yes / No
Prepared (In charge person) Name/Signature / / 202

Reviewed(HSE Manager) Name/Signature / / 202

Approved (CM) Name/Signature / / 202

Obligatory of Attachment #1 Crane position, Weight position, Swing of boom, Working radius, Length of
- Drawings Including; boom, Angle of sling when lifting, Location of lifting lugs, Foundation
Obligatory of Attachment #2
Load Chart, Crane Spec'
- Crane Load Chart

2/7
HIGH RISK LIFTING PLAN (Tandem)
Subcontractor Date of lifting
Description of Lifting Activity

Details of Main Crane Load Position

Maker & Model (Model No.) Counter Weight (Ton)
Capacity (Ton) Outrigger Extended 100%

Max. boom length for Lifting(m) Out Trigger Met Size (cm X cm)
Max. Working radius from center of crane Jib Length (m) and offset Angle (if
(m) needed)
Details of Tail Crane Load Position
Maker & Model (Model No.) Counter Weight (Ton)
Capacity (Ton) Outrigger Extended 100%

Max. boom length for Lifting(m) Out Trigger Met Size (cm X cm)
Max. Working radius from center of crane Jib Length (m) and offset Angle
(m) (if needed)

Main Crane Lifting Gears (Spreader Bar, Sling, Wire, Chain, Shackle, ETC)
1. Hook Block
a) Hook Block Capacity b) Total Weight of Hook Block
2. Spreader Bar (If need)
a) Capacity b) Weight
3. Shackle
a) Shackle Capacity and Q'ty b) Q'ty
e) Total Rigging capacity (a x b) Ton b) Total Weight of Shackles
4. □Sling □Wire □Chain □ETC Safety Factor(BL:6)

a) Breaking Load or WLL / SWL b) Q'ty

c) Angle (Please check figure 1) : ( ) f) Total Weight of Slings
e) Total Rigging capacity (a x b)/c #DIV/0! Total Lowest Capacity
Tail Crane Lifting Gears (Spreader Bar, Sling, Wire, Chain, Shackle, ETC)
1. Hook Block
a) Hook Block Capacity b) Total Weight of Hook Block
2. Spreader Bar (If need)
a) Capacity b) Weight
3. Shackle
a) Shackle Capacity and Q'ty b) Q'ty
e) Total Rigging capacity (a x b) Ton b) Total Weight of Schakles
4. □Sling □Wire □Chain □ETC Safety Factor(BL:6)

a) Breaking Load or WLL /SWL b) Q'ty

c) Angle (Please check figure 1) f) Total Weight of Slings
e) Total Rigging capacity (a x b)/c #DIV/0! Total Lowest Capacity

3/7
HIGH RISK LIFTING PLAN (Tandem)
Details of Object for Main Load Position Details of Object
Weight of Object Size (m x m x m)
Weight of Gears (Ton) 0.0 Ton Max. height of lift from ground(m)

Details of Object for Tail Load Position Details of Object

Weight of Object Size (m x m x m)
Weight of Gears (Ton) 0.0 Ton Max. height of lift from ground(m)

Main Calculation Chart

Total weight (100% Weight Cover) Ton Max crane capacity at radius
Crane Capacity Ratio (%) - Max 75% 0.0% Crane Capacity Ratio (%) - Max 75%
Tail Calculation Chart
Total weight (Max 50% Weight Cover) Ton Main crane Max capacity at radius
Crane Capacity Ratio (%) - Max 75% 0.0% Crane Capacity Ratio (%) - Max 75%

Position Name Position

Supervisor Supervisor
Main Crane Operator Tail Crane Operator
Rigger Rigger
Banksman Banksman

Ground Conditions
Have assurances been obtained that the ground can withstand the load?

Prepared (In charge person) Name/Signature

Reviewed(HSE Manager) Name/Signature

Approved (CM) Name/Signature

Obligatory of Attachment #1 Crane position, Weight position, Swing of boom, Working radius, Length of
- Drawings Including; boom, Angle of sling when lifting, Location of lifting lugs, Foundation
Obligatory of Attachment #2
Load Chart, Crane Spec'
- Crane Load Chart

4/7
 / / 2022

Position

Position

C)

#DIV/0!

#DIV/0!

5/7
 Load Position

Load Position

#DIV/0!

#DIV/0!

Name

Yes / No

/ / 2022

/ / 2022

/ / 2022

m, Working radius, Length of

ting lugs, Foundation

6/7
SLING AND SHACKLE CALCULATION

1. 2 Points Lifting

Lifting Weight 6.3 Ton

L (Length of Sling) 10 m

D (Distance of Lifting Points) 5m

Calculation of Degree 1.3181160716528 RAD

W.L.L FOR EACH SLING/SHACKLE 3.3 Ton

W.L.L FOR SLING (If Choke) 4.1 Ton

1. 4 Points Lifting

Lifting Weight 6.3 Ton

L (Length of Sling) 10 m

A (Distance of Lifting Points) 5m H

B (Width of Lifting Points) 5m
D B
D (Diagonal) 7.0710678118655 m

Calculation of Degree 1.2094292028882 RAD 69.295188945365

W.L.L FOR EACH SLING/SHACKLE 2.2 Ton A

W.L.L FOR SLING (If Choke) 2.8 Ton