vSpace Pro Enterprise Edition

for Windows
Version 12.9.2 (Official Release)

RELEASE NOTES
February 21, 2025

400 CONCAR DRIVE 4TH FLOOR | SAN MATEO | CALIFORNIA 94402

RODUCT RELEASE NOTES:
NCOMPUTING VSPACE PRO ENTERPRISE EDITION

Product: NComputing vSpace Pro Enterprise Edition for Windows

Version: 12.9.2

Supported Operating Systems*:

• Windows Server 2025

• Windows Server 2022
• Windows Server 2019
• Windows Server 2016
• Windows Server 2012 R2 U1
• Windows Server 2012
• Windows Server 2008 R2 SP1
• MultiPoint Services Role – Windows Server 2016
• Windows MultiPoint Server 2012
• Windows MultiPoint Server 2011
• Windows 11 (64-bit)
• Windows 10 Enterprise Edition (64-bit)
• Windows 10 Pro Edition (64-bit)
• Windows 8.1 (64-bit)
• Windows 7 SP1 (64-bit)

* For licensing details, see: http://www.ncomputing.com/mslicensing.

Supported NComputing Access Devices and Clients with their latest firmware:

• L400 (version 1.3.0 or newer)

• RX300/RX300+ (version 4.4.0* or newer)
• RX420(vSpace) with any firmware version
• L250, L300 and L350 (L-series) (version 1.15.8* or newer)
• M300, MX100S and MX100D (M/MX-series) (version 2.4.8*)
• RX420(RDP), RX440(RDP), RX-RDP+ (version 5.12.4 or newer)
• RX520, RX540, RX580 (version 5.12.3 or newer)
• LEAFOS (BYOD or repurpose old PCs and laptops), EX500/EX500 (version
5.12.4 or newer)
• vSpace Pro Client for Windows** (version 2.6.0 or newer)

* Firmware update files are already included in the vSpace Pro Enterprise software.
These devices can update firmware directly via the vSpace Pro server.
** vSpace Client is supported for desktop session delivery only and does not include
the management options available for other access devices.

Supported vSpace Manager and vSpace Console

• vSpace Manager, version 1.8.14

• vSpace Console, version 3.1.8

Supported Server OS variants include: Standard, Enterprise, and Datacenter.

Note that only 64-bit versions of Windows operating systems are supported.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 2
The following notes contain important information. Please read this entire document to ensure that
your installation and deployment process goes smoothly.

ABOUT THIS RELEASE:

vSpace Pro Enterprise Edition is the focal point for future enhancements and development for the
vSpace Pro family. vSpace Pro Enterprise Edition includes advanced features such as scalability
improvements for large deployments, latest Windows OS support including Windows Server 2025,
Windows Server 2022, Windows Server 2019, Windows 11 and 10, UXP Turbo (H.264) protocol
support, multi-touch monitor support, advanced USB peripheral support and more. This vSpace Pro
Enterprise Edition is available for NComputing customers who are in compliance with the Annual
Maintenance Program (AMP) plans. Customers who are not in compliance with the AMP plan may
have restrictions to vSpace access.

You can download and install vSpace Pro Enterprise for free. By default you will begin in trial mode
where all functionality is available but limited as described below. To remove trial mode you'll need
to purchase the required licenses for the connected endpoints.

Limitations in trial mode vary by model. The following behaviors apply to customer accounts with no
existing licenses. If you are unsure about your licensing requirements, please contact your
NComputing representative.

Table 1: vSpace Pro Enterprise Trial Mode Behavior (version 12.7.4 and higher version)

Endpoint Trial mode restrictions Required license type

to remove trial mode
• RX300, RX300+ A maximum of 5 concurrent sessions are AMP for Space Pro (per
• L250, L300, L350, L400 permitted from this group of devices for a device)
• M300, MX100S, MX100D one-time trial period of 7 days. There is no
• RX420(vSpace) session time limit during the trial period. (SKU: NC-AMP-1A)
Once the trial period is over, sessions from
these devices will not be allowed, and AMP
for vSpace Pro will be required for these
devices to establish sessions with vSpace Pro
Enterprise.
• RX420(RDP), RX440(RDP) A maximum of 5 concurrent sessions are vSpace Pro Software
• RX-RDP+ permitted from this group of devices. No Connection license* (per
• RX520, RX540, RX580 expiration on trial period. The sessions will concurrent user session)
• vSpace Pro Software client end automatically after 10 minutes. Users can
for Windows sign-in again after the timeout. (SKU: vSpacePro-SW-1A)
• vSpace Pro Software client
for Chrome
• vSpace Pro Software client
for Whale Browser
• LEAFOS(x86/64) A maximum of 5 concurrent sessions are LEAF OS Software
• EX500 (part# 700-0038) permitted from this group of devices. No Connection license* (per
• LEAFOS(PI4) expiration on trial period. The sessions will concurrent user session)
end automatically after 10 minutes. Users can
sign-in again after the timeout. (SKU: vSpacePro-LeafOS-
1A)

* Note: RX420(RDP)/RX440(RDP) thin client, RX-RDP+ thin clients, RX520/RX540/RX580 thin clients,
or LEAF OS devices purchased with bundled vSpace connection licenses are not subject to trial mode
behaviors and will have full access.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 3
Please use the following link to learn more about NComputing’s Annual Maintenance Program (AMP)
and its benefits: https://www.ncomputing.com/products/vSpace/vSpace%20PRO%20AMP

Please review the NComputing software end-user license agreement.

NEW PRODUCT FEATURES, CHANGES, AND IMPROVEMENTS (12. 9.2)

vSpace Pro Enterprise Edition version 12.9.2 is a maintenance update release that replaces the
previously released version 12.9.1 and earlier with feature enhancements and bug fixes:

vSpace Server enhancement:

• Reduced vSpace host utilization and improved overall user density by enhancing GPU
offloading during H.264 sessions.

vSpace Server bug fixes:

• RDSL-7562 - Fixed slight text discoloration in vSpace sessions when H.264 is enabled.
• RDSL-7564 - Resolved vSpace incompatibility with the Windows 11 version 24H2 OS update
(2025-02 cumulative update, KB5051987). After this OS update, the vSpace host may
experience booting issues. To prevent this, the vSpace host should be upgraded to the latest
vSpace Pro Enterprise version before updating the host OS to Windows 11 (2025-02
cumulative update).

MPORTANT NOTE:

• NComputing has migrated to using enhanced security certificates for vSpace Pro software
12.5.2 and higher versions. Previous versions of vSpace Pro came with SHA1 security
certificates. Following the industry trend, we now only use SHA2 security certificates in
vSpace Pro.
• If you use Windows 7 or Windows Server 2008 R2 and do not have SHA2 security certificate
patch applied to the OS, you will not be able to install vSpace Pro Enterprise 12.5.2 or
higher versions. In this case, you must be updated to accept SHA2 security certificates.
Other newer Windows OSes support SHA2 security certificates by default.
• Please review our 'Knowledge Base article' for details of the requirements including the
specific Microsoft updates you must apply before you can install this version of vSpace Pro
software on Windows 7 and Windows Server 2008 R2.

PREVIOUS RELEASE NOTES (VSPACE PRO ENTERPRISE EDITION 12. 9.1)

vSpace Pro Enterprise Edition version 12.9.1 is a major update release that replaces the previously
released version 12.8.0 and earlier with feature enhancements and bug fixes:

vSpace Server new features & enhancements:

• Added Windows Server 2025 host OS support.

• Added support for RX520, RX540, and RX580 thin clients.
• Implemented safeguards to prevent system crashes by restricting new logins when the host
machine's memory reaches a critical threshold.
• Support for the enhanced ‘UXP Turbo’ protocol with advanced H.264 codec.
o The UXP Turbo protocol (with H.264 codec) provides more efficient compression
compared to both the UXP Turbo (with JPEG codec) and standard UXP protocols.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 4
 This results in significantly reduced bandwidth requirements and lower latency,
making it ideal for vSpace remote access over a Wide-Area Network or VPN.
Additionally, it is optimized for 3D rendering applications that demand low latency.

Please refer to the summary table below for the available vSpace protocol options
for supported clients:

vSpace Protocols UXP UXP Turbo (JPEG) UXP Tubo (H.264)*

Bandwidth Mid Higher Lower

requirements
Mid; Higher;
vSpace host Lower but can be lower via but can be lowered via GPU
utilization GPU offload offload

User access LAN LAN LAN, WAN, or VPN

(LAN vs WAN)

Use case profiles Productivity Multi-media Multi-media intensive

applications intensive applications, 3D
applications rendering applications,
WAN remote access

* Host Windows OSes with UXP Turbo (H.264) protocol support include:

▪ Windows Server 2022, Windows Server 2025, Windows 10, and Windows 11
▪ For Windows 10 and 11, the Window Media Feature Pack is required. For
Windows Server 2022 and 2025, Window Media Foundation is required. Learn
more here.

* Clients with UXP Turbo (H.264) protocol support include:

▪ L400 (version 1.3.0 or newer)

▪ RX300 and RX300+ (version 4.4.0 or newer)
▪ RX420(RDP), RX440(RDP), RX-RDP+ (version 5.12.4 or newer)
▪ LEAF OS, EX500/EX500W (version 5.12.4 or newer)
▪ RX520, RX540, and RX580 (version 5.12.3 or newer)
▪ vSpace Client for Windows (version 2.7.0 or newer)

o By default, the UXP Turbo (H.264) protocol is disabled in vSpace, but it can be
enabled through the vSpace Console. Refer to Figure 1 below for instructions on
how to centrally enable this feature across your vSpace deployment on supported
clients.

o If a client's firmware does not support UXP Turbo (H.264) protocol, it will fall back
to either the standard UXP protocol or UXP Turbo (JPEG) protocol, depending on the
vSpace Console settings.

o To enhance deployment flexibility, each device can be individually configured to

disable the UXP Turbo (H.264) protocol. When disabled, the system defaults to
either the standard UXP or UXP Turbo (JPEG) protocol, optimizing the vSpace host's
resource usage. For example, local users might use the standard UXP or UXP Turbo
(JPEG) protocol, while remote users over a wide-area network can employ the UXP
Turbo (H.264) protocol to reduce bandwidth consumption, though this requires more

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 5
 vSpace host resources. Please refer to Figure 2 below for guidance on using the
Device Profile in the vSpace Console to enable or disable the UXP Turbo (H.264)
protocol for individual devices or groups of supported clients.

Note: Using the UXP Turbo (H.264) protocol on a vSpace host may increase CPU
utilization due to the encoding process. It is advisable to enable this feature on a
more powerful vSpace host, ideally one with embedded or standalone GPU
components to support hardware acceleration. The UXP Turbo (H.264) protocol is
particularly suited for remote access over WAN and 3D rendering applications. This
protocol can be activated or deactivated on a per-device basis, allowing for
optimized management to balance vSpace host resource usage.

vSpace Console enhancements:

• Added device and session management support for RX520, RX540 and RX580 thin clients.
• Modernized UI for vSpace Console’s ‘Session View’ and ‘Multiview’.
• Added the option to enable UXP Turbo (h.264) protocol for the deployed vSpace Server:
o From vSpace Console > Manage Servers > select host > Select ‘Enable UXP Turbo
Protocol’ > Select ‘Use advanced H.264 codec’. By default, ‘Use hardware encoding
for H.264 codec’ will be selected.

Figure 1: Enabling UXP Turbo (H.264) protocol via vSpace Console

• Enhanced the Device Profile for RX300/RX300+, L400, RX420(RDP)/RX440(RDP), RX-RDP+,

LEAFOS, and RX520/RX540/RX580 devices to include the support for the UXP Turbo (H.264)
protocol.
• The UXP Turbo (H.264) protocol can be disabled on a per-device basis to suit the
deployment use case. For RX300 and RX300+ thin client:
o In the vSpace Console > Manage Devices > Create a custom profile based on RX300
pre-defined profile > Click on ‘Connections’ tab > De-select ‘Enable H.264 support’.
Then apply this custom Device Profile to your selected RX300 and/or RX300+
devices.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 6
 Figure 2: Use Device Profile in vSpace Console to disable UXP Turbo (H.264) protocol on selected device(s)

vSpace Server bug fixes:

• Resolved vSpace connection issues with Windows 11 (version 24H2).

• Fixed a rare vSpace freeze issue in virtualized environments.

RX300/RX300+ firmware (version 4.4.0) included in vSpace Pro Enterprise (version 12.9.1)
release:

New product features introduced in RX300/RX300+ version 4.4.0:

• Support for the enhanced ‘UXP Turbo’ protocol with the advanced H.264 codec
(requires vSpace Pro Enterprise version 12.9.1 or higher), offering improved
compression, reduced bandwidth, and lower latency, making it ideal for:
o vSpace Server access over WAN or VPN
o Applications requiring low network latency, such as CAD systems which need to
render and animate 3D objects.

The UXP Turbo with the H.264 support brings next-generation performance for vSpace
Pro Enterprise servers running on Windows 10, Windows 11, Windows Server 2022, or
Windows Server 2025.

• Possibility to upload wallpapers, boot-up splash images, certificates, and generic files
(e.g. ovpn files) from the locally connected USB drive.
• Ability to use Generic Files to distribute OpenVPN configurations.
• Ability to bypass the HTTP proxy when establishing management connection to PMC
Endpoint Manager (e.g., when deployed on-prem), while using the configured HTTP
proxy for other network connections (e.g., connections through the Internet).
• VPN icon in the system menu for IP display and quick configuration access.

Enhancements introduced in RX300/RX300+ version 4.4.0:

• New options in RX300/RX300+ vSpace Pro connection settings to enable/disable ‘UXP

Turbo protocol’ and ‘H.264 decoding’ capabilities.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 7
 These options provide the flexibility of being able to globally enable the H.264 encoding
in vSpace Server (requiring higher CPU/GPU load), but disable the H.264 support on
selected clients when not required.

• Enhanced vCAST components for improved compatibility and optimized performance

with full HD video content in vSpace sessions.
• Improved video and audio synchronization of vCAST-ed content.
• Support for eToken and Proton Electronic security keys to allow native redirection of
them into vSpace sessions.
• Updated VERDE VDI client with Secure Browser support.
• Updated OpenVPN client to newer version.
• Continuing the auto-connect loop when encountering RDP connection errors (e.g. host
machine not yet ready while powering up), if kiosk mode is configured.
• Added Wi-Fi scan button to refresh SSIDs.
• Updated Network settings with an easy-to-navigate tab widget.
• Update device system time after login to Enterprise 802.1x network.
• Added [Esc] key support to close GUI dialogs.
• Improved handling of real-time PMC Endpoint Manager requests and communication.

Issues resolved in RX300/RX300+ version 4.4.0:

• RX2092 – Resolved OpenVPN connection failure issue.

• RX2062 – Resolved issue with screen shadowing failure when PMC URL in device
configuration contains the /pmc path.
• RX2075 – Resolved Wi-Fi connection failure issue after rebooting after a power
interruption.

PREVIOUS RELEASE NOTES (VSPACE PRO ENTERPRISE EDITION 12.8.0)

vSpace Pro Enterprise Edition version 12.8.0 is a major update release that replaces the previously
released version 12.7.5 and earlier with feature enhancements and bug fixes:

vSpace Server, vSpace Manager and vSpace Console new features:

• Enabled vSpace Console broadcast support from L250/L300/L350 to the L400

thin client; devices must be set to the same display resolution.
• Implemented support for custom SSL certificate for vSpace Pro Enterprise
deployment; click here for further details.
• Added support for mice with back/forward buttons; requires L400 firmware
1.2.30 or higher.
• Implemented support for vSpace Pro Enterprise offline registration; customers
should contact NComputing to check for eligibility

vSpace Server and vSpace Manager bug fixes:

• VCON –1009 - Addressed the vSpace Console task scheduler issue (reboot, power off,
firmware update) for L400 devices.
• RDSL-7519 – Resolved the issue where vCast Streaming via VLC Player didn’t function
when VLC Player was installed through the Windows Package Manager.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 8
PREVIOUS RELEASE NOTES (VSPACE PRO ENTERPRISE EDITION 12.7.5)

vSpace Pro Enterprise Edition version 12.7.5 is a hotfix release that replaces the previously
released version 12.7.4 and earlier. This version is intended for customers who have
encountered occasional licensing issues with RX300, RX300+, RX-RDP+, RX420(RDP),
RX440(RDP), or EX500 devices related to the prebundled vSpace connection license.

PREVIOUS RELEASE NOTES (VSPACE PRO ENTERPRISE EDITION 12.7.4)

vSpace Pro Enterprise Edition version 12.7.4 is a major official release that replaces
previously released version 12.7.2, as well as all earlier Enterprise Edition versions with
feature enhancements and bug fixes. This version carries over all features and
enhancements from the previous vSpace Pro Enterprise Edition versions.

vSpace Server, vSpace Manager and vSpace Console new features:

• Added support for NComputing L400 thin client, including user session and device
management with vSpace Console.
• Added support for NComputing RX440(RDP) thin client with the proper client ID in
vSpace Console.

vSpace Server and vSpace Manager bug fixes:

• RDSL-7493 – Fixed an occasional auto-login black screen issue when reconnecting to

existing sessions on Windows Server 2022.
• RDSL-7495 – Resolved an occasional licensing issue where licenses were not
immediately returned to vSpace Manager when reconnecting multiple sessions
simultaneously.
• RDSL-7497 – Resolved a rare vSpace Manager crash issue when registering and
unregistering sequentially within a short period.
• RDSL-7496 – Fixed the issue where the first vSpace session connection couldn't be
established for up to 10 minutes immediately following a new vSpace installation or
software update. We recommend waiting for 2-3 minutes before attempting to
connect to a vSpace session right after vSpace installation or upgrade.
• RDSL-7473 – When UXP Turbo protocol is enabled, resolved the black screen issue
during login from LEAF OS and RX420 devices with incorrect usernames or
passwords.
• RDSL-7470 – When UXP Turbo protocol is enabled in dual display mode, fixed the
issue of the mouse pointer disappearing when moving it between displays.

Following is the new improvement introduced in RX300 firmware version 4.2.16 (from
the previous 4.2.15 release), which comes with vSpace Pro Enterprise Edition 12.7.4:

• Updated software components for vCAST Streaming in vSpace session.

PREVIOUS RELEASE NOTES (VSPACE PRO ENTERPRISE EDITION 12.7.2)

vSpace Pro Enterprise Edition version 12.7.2 is a major official release that replaces
previously released version 12.7.1, as well as all earlier Enterprise Edition versions with
feature enhancements and bug fixes. This version carries over all features and
enhancements from the previous vSpace Pro Enterprise Edition versions.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 9
 vSpace Server new features & enhancements:

• Upgraded vSpace encoding libraries for standard UXP protocol and UXP Turbo
protocol for improved performance and reduced server-side resource utilization.
• Further improved browser scrolling performance for vSpace Pro Enterprise in
Windows Server 2022, Windows 10 and 11.

vSpace Console enhancements:

• Enable Space Console remote session management (view/take control) of devices
connected to remote vSpace servers located in different subnets.
o To configure, go to vSpace Console > Servers > Select a vSpace Pro server >
select the ‘Enable Remote Access’ checkbox to allow vSpace Consoles
running on other servers to remotely access this vSpace server.

vSpace Server and vSpace Console bug fixes:

• RDSL-7437 - Resolved rare session crashed issue with UXP Turbo while browsing
certain web pages.
• RDSL-7434 - Resolved occasional display artifacts in UXP Turbo session on RX thin
clients when using webcam or during video playback.
• RDSL-7445 – Fixed incorrect colors during movie playback with standard UXP
protocol on Windows 7.

PREVIOUS RELEASE NOTES (VSPACE PRO ENTERPRISE EDITION 12.7.1)

vSpace Server enhancements:

New ‘UXP Turbo’ Protocol

• New ‘UXP Turbo’ protocol for enhanced desktop delivery experience for
multimedia intensive use cases such as:
o 3D rendering,
o Smooth browser scrolling & video playback,
o Enhanced performance on multi-media intensive applications,

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 10
 o Working in conjunction with vCAST streaming technology to offload
traffic from vSpace host machines.
• Supported on vSpace Pro Enterprise host machines running Windows 10,
Windows 11 or Windows Sever 2022 operating systems.
• Supported in both vSpace bare-metal or VM installations.
• Support hardware acceleration of UXP Turbo encoding on vSpace host machines
with Nvidia GPU and modern Intel CPU platforms; Refer to this KB article for
details.
• Supported clients include:
o RX300 (version 4.2.2 or higher version)
o RX420(RDP) and RX-RDP+ thin clients (version 3.2.4 or higher)
o LEAF OS devices (version 3.2.4 or higher)

vSpace Console enhancements:

• Option to enable ‘UXP Turbo’ protocol for enhanced desktop delivery
experience.
• To enable ‘UXP Turbo’: Launch Space Console > ‘Manage Servers’ > select the
target vSpace server > ‘Settings’ tab > select ‘Enable UXP Turbo Protocol’ and
click ‘Apply’ (see screenshot below):

vSpace Server and vSpace Console bug fixes:

• Fixed vSpace Console cannot start in domain environment.

• Upgraded Health Monitor module communication to NComputing Management
Portal from earlier version of TLS 1.x to TLS 1.2.
Following are the new product features introduced in RX300 firmware version 4.2.2
which comes with vSpace Pro Enterprise Edition 12.7.1:
• Support of new ‘UXP Turbo’ protocol with vSpace Pro Enterprise (12.7.1 and
higher versions) to provide enhanced desktop delivery experience for
multimedia intensive use cases.
• Support for PMC’s device ‘lost’ and ‘found’ feature related to device ownership
(ability to lock lost devices and unlock found devices).

Other improvements introduced in RX300 firmware version 4.2.2:

• Enhanced PMC URL auto-discovery mechanism.

• Updated vCAST streaming software [vSpace and RDP connection modes].

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 11
 The following RX300 firmware issues have been fixed in version 4.2.2:

• RX-2006 - Auto desktop connection feature does not work [VERDE VDI].
• RX-2000 - vSpace USB headset volume sound is too low.
• RX-1996 – Issues with static DNS after disconnecting VPN.

PREVIOUS RELEASE NOTES (VSPACE PRO ENTERPRISE EDITION 12.6.1)

vSpace Server enhancements:

• Support for Windows 11 (Insider Preview).

• Support for Windows 10 21H1 release.
• Support for LEAF OS license with bundled vSpace Pro perpetual connection
license (SKU# LEAFOS-P-VS):
o NComputing LEAF OS is a next-generation software endpoint solution
that transforms any x86-64 PC or laptop into a centrally managed
endpoint. Designed and optimized for vSpace Pro Enterprise, VERDE
VDI & Remote Access, Microsoft AVD, Microsoft Windows 365 Cloud
PC, and Microsoft RDS.

vSpace Console enhancements:

• New vSpace Console device ‘Export List’ feature (.csv file)

• vSpace Console code optimization for enhanced performance and reliability.

vSpace Server and vSpace Console bug fixes:

• Fixed the issue in the previous vSpace Pro interim release (version 12.6.0)
where incorrect drivers were installed in Windows 8, Windows Server 2011
and Windows 2012 OS environment. If vSpace Pro Enterprise 12.6.0 was
previously installed in the above Windows OS environment, we recommend
customers uninstalling 12.6.0 first before installing 12.6.1.
• RDSL-7401 – In some cases vSpace installation does not perform post-install
cleanup.
• RDSL-7380 – Dual display mouse cursor position is incorrectly scaled in X and
Y coordinates after newest Windows 10 and Windows Server 2019 updates.
• RDSL-7397 – RX300 with SDA (secondary display adapter) showed black
screen on the secondary display in native 1366x768 resolution.
• RDSL-7381 – The ‘Find Session’ feature in vSpace Console in device list does
not always work.
• VCON-814 – Sorting preference order should be saved after restarting vSpace
Console.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 12
 • VCON-989 – LEAF OS devices disappeared from device group in vSpace
Console when adding new devices or change to another device group tab.

PREVIOUS RELEASE NOTES (VSPACE PRO ENTERPRISE EDITION 12 .5.2)

vSpace Server enhancements:

• Support for Windows 10 20H2 release.

• vSpace Pro Enterprise Edition – vSpace Pro Software Client connection and
LEAF OS software connection trial mode (please refer to Table 1 above).
• Improved browser scrolling performance.
• Up to 2560x1440 display resolution support for vSpace connection on
selected endpoints. This resolution is commonly known as Quad High
Definition (QHD) or 2K.
• Endpoints with 2K display resolution support in vSpace Pro Enterprise Edition
includes:
o RX420(RDP) thin client – (version 1.12.8 and higher),
o vSpace Pro Software Client for Windows (version 1.6.0.1.132 and
higher), and
o LEAF OS devices (version 2.2.18 and higher).

vSpace Console enhancements:

• Removed redundant and external .NET Framework dependencies from

vSpace Console
• Added LEAFOS(PI4) new model support into vSpace Pro Enterprise Console
• If both Wi-Fi and Ethernet are active on a RX thin client, then vSpace
Console will only display an unique device (instead of two).
• Supported RX300 version 4.0.5 device management (without Raspbian
Desktop operation mode).
• If both Wi-Fi and Ethernet are active on a RX thin client, then vSpace
Console will only display an unique device (instead of two).
• New “Task Schedule” feature support for device ‘Groups’ in vSpace Console;
Refer this KB for details. See screenshot example below:
o Scheduled device reboot (repeat schedule)
▪ Supported endpoints include L/M/MX-series and RX-series
thin clients (RX300, RX-RDP+ and RX420(RDP)).
o Schedule device shutdown (repeat schedule)
▪ Supported endpoints include all RX-series thin clients.
o Scheduled firmware updates (single occurrence)
▪ Supported endpoints include L/M/MX-series and RX300 thin
client.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 13
vSpace Server and vSpace Console bug fixes:

• RDSL-7371 – vSpace sessions do not connect to vSpace Server for the first
few minutes after installation for certain Windows Oses.
• RDSL-7369 - Login screen size incorrect in rare cases.
• RDSL-7364 - When display resolution is set to 2560x1440 in dual displays,
mouse coordinates are incorrect in vSpace session.
• RDSL-6409 – Certain USB pen drives connected to endpoints are visible on all
vSpace sessions in Windows 10 and Windows Sever 2016 host machine.

Following are the new product features introduced in RX300 firmware version
4.0.5 which comes with vSpace Pro Enterprise Edition 12.5.2:

• Additional VPN clients:

o L2TP/IPsec VPN client.
o IKEv2/IPsec VPN client.
o FortiClient SSL VPN client.
• Notifications about availability of firmware updates.
• Support for Subnet Tags (when managed by the upcoming PMC 2.6).
• Ability to set up a custom boot splash image.
• Support for the shutdown command sent by vSpace Console.

Other improvements introduced in RX300 firmware version 4.0.5:

• VPN reconnect after plugging in the Ethernet cable.

• NTP date and time update after plugging in the Ethernet cable.
• New default NComputing wallpaper.
• Updated vCAST web streaming components.

The following RX300 firmware issues have been fixed in version 4.0.5:

• RX-1910 – Incorrect calculation of MD5 sums for certificate files added

manually.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 14
PREVIOUS RELEASE NOTES (VSPACE PRO ENTERPRISE EDITION 12.4.0)

vSpace Pro Enterprise Edition version 12.4.0 is a major product release that replaces
the previously released version 12.3.2 (as well as all earlier Enterprise Edition
versions) with feature enhancements and bug fixes. This version carries over all
features and enhancements from the previous vSpace Pro Enterprise Edition
versions.

vSpace Server enhancements:

• Support for the new RX-RDP+ clients operating in vSpace Client mode
(requires separate vSpace Pro Client connection license).
• Support for native redirection of webcams in vSpace sessions connected
from RX300, RX420(RDP), RX-RDP+ clients and vSpace Pro Client for
Windows:
o The following matrix table contains the native webcams support in
various Windows OSes in vSpace Client mode for each device.
Webcams support is tested in Microsoft Teams, Zoom, Webex,
GoToMeeting and Skype conferencing applications.
o With Windows Server 2019 or Windows 10 host, each user, under
Privacy settings, needs to allow the applications to access the
redirected camera.
Native webcams support RX300 RX-RDP+ RX420(RDP) vSpace Pro Client for Windows
(vSpace Client mode) (version 3.10.3 or higher) (version 1.10.10 or higher) (version 1.10.10 or higher) (version 2.6.0 or higher)
Windows Server 2019 ✔ ✔ ✔ ✔
Windows Server 2016 ✔ ✔ ✔ ✔
Windows Server 2012 R2 ✔ ✔ ✔ ✔
Windows Server 2008 R2 ✔ ✔ ✔ ✔
Windows 10 ✔ ✔ ✔ ✔
Windows 7 ✔ ✔ ✔ ✔

vSpace Console enhancements:

• Dual display support in session ‘View’ and ‘Take Control’ tools.

• Resizable session ‘View’ and ‘Take Control’ windows.

vSpace Server and vSpace Console bug fixes:

• VCON-961 – Health Monitor settings are pushed/pulled only from vSpace

Manager running on ‘localhost’.
• VCON-843 – Discrepancy between display settings shown in vSpace Console
and RX300.
• VCON-716 – In vSpace Console’s sessions ‘View’, the horizontal scrollbar is
hidden under Windows taskbar.

Following are the new product features introduced in RX300 firmware version
3.10.3 which comes with vSpace Pro Enterprise Edition 12.4.0:

• Native redirection of webcams in all operation modes (excluding Raspbian

Desktop mode).

Other improvements introduced in RX300 firmware version 3.10.3:

• RX-1869 – Prevent the use of native audio channel in UXP mode when audio
redirection is not set to Native.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 15
 The following RX300 firmware issues have been fixed in version 3.10.3:

• RX-1871 – OpenVPN: Device caches the .ovpn file and user credentials even
when not configured to do so.
• RX-1866 – Cracking sound in RDP session when using Zoom application.
• RX-1863 – No sound in USB headset when the headset was connected after a
webcam.
• RX-1859 – vSpace Client crash when opening a specific page in web browser
running in vSpace session.
• RX-1852 – OpenVPN client is not asking for key password when .ovpn file
contains encrypted RSA private key.

PREVIOUS RELEASE NOTES (VSPACE PRO ENTERPRISE EDITION 12.3.2)

vSpace Pro Enterprise Edition version 12.3.2 is a major product release that replaces
the previously released version 12.3.1 with feature enhancements and bug fixes, as
well as all earlier Enterprise Edition versions. This version carries over all features
and enhancements from the previous vSpace Pro Enterprise release versions.

vSpace Server enhancements:

• Support RX420(RDP) vSpace connection with native dual display, full-screen,

full-motion HD multimedia playback and NComputing vCAST streaming
support; requires separate vSpace Pro Client connection license.
• Added vCAST Streaming support for Microsoft Edge Browser. vCAST
Streaming reduces server-side CPU usage when users watch web videos like
YouTube, Vimeo, or local media content, and does so without the need for
expensive GPUs. This technology results in higher quality video streaming
without CPU bottlenecks, allowing for more concurrent users on your
system.
• Further Improved stability of vSpace Pro Enterprise server under high-CPU
load and low resource host environment.

vSpace Console enhancements:

• Support ‘Run” command dialog box in vSpace Console which allows admins
to type the name of a program, folder, document, or web pages to
simultaneously open on any remote vSpace user session or sessions(s).

vSpace Server bug fixes:

• RDSL-7307 – RX300 displayed a black screen instead of a session when ‘Video

stream support’ is disabled in vSpace Console.
• RDSL-7292 – vSpace Console broadcast feature did not work on Windows 10
1903.
• RDSL-7306 – Rare BSOD of host with high CPU load over an extended period
of time.

Following are the new product features introduced in RX300 firmware version
3.9.2 which comes with vSpace Pro Enterprise Edition (12.3.2):

• Support for the VERDE Remote Access feature (VERDE 8.2.7 or higher
version).

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 16
 Other improvements introduced in RX300 firmware version 3.9.2:

• Reduced Wi-Fi settings application time.

• Improved behavior of the Wi-Fi icon.
• 1270x720 will be set as Automatic resolution when the device will be booted
up without any HDMI monitor connected.
• Improved system daemons reloading procedure when applying configuration
changes.
• Improved RDP sessions stability by disabling audio redirection when "No
audio output/input" is at the top of audio priority list.
• Improved dialog box for selecting USB devices identified by custom VID:PID.

The following RX300 firmware issues have been fixed in version 3.9.2:

• RX-1833 – GUI crash when Ethernet, VPN and PMC were connected and the
Ethernet cable was unplugged/plugged.
• RX-1832 – OpenVPN: The key file specified as parameter of the tls-auth
entry of .ovpn file does not get copied from memory stick.
• RX-1828 – The Ethernet interface sometimes get disabled after firmware
recovery.

PREVIOUS RELEASE NOTES (VSPACE PRO ENTERPRISE EDITION 12.3.1)

vSpace Pro Enterprise Edition version 12.3.1 is a maintenance product release that
replaces the previously released version 12.3.0 with feature enhancements and bug
fixes, as well as all earlier Enterprise Edition versions. This version carries over all
features and enhancements from the previous vSpace Pro Enterprise release
versions.

vSpace Server enhancements:

• Support for Microsoft Teams conference calls. Audio & Video quality may
depend on the client type and Internet bandwidth connection.
• New RX300 firmware (version 3.8.1) with integrated VPN support.
• Support for HID DigitalPersonal fingerprint readers.
• Support for previous Fujitsu devices powered by NComputing.
• Added display information in vSpace Manager for AMP and Aged Device
Connection license count.

vSpacer Server bug fixes:

• RDSL-7293 - Fixed the issue where vCAST MOJO streaming does not work on
Windows 10 1903 and higher versions.
• RDSL-7292 - Fixed the issue where vSpace Console broadcast feature does
not work on Windows 10 1903 and higher versions.
• RDSL-7291 - Fixed the issue where the session reconnection with a different
display resolution would freeze the vSpace client on Windows 10 1903 and
higher versions.
• RDSL-7290 - Fixed the improper saving of "Disconnected Session Cleanup
Timeout" value in vSpace Console on Windows Server 2008R2 and Windows 7
host machines.
• RDSL-7285 - Fixed a rare BSOD issue after connecting RX300 devices with
connected USB peripheral devices.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 17
 Following are the new product features introduced in RX300 firmware version
3.8.1 which comes with vSpace Pro Enterprise Edition (12.3.1):

• Integrated OpenVPN client:

o Supported authentication methods include pre-shared keys,
certificate-based, and username/password-based authentications.
• Integrated OpenConnect VPN client (for connections to Cisco AnyConnect
and compatible VPNs):
o Supported authentication methods include certificate-based and
username/password-based authentications.
• Integrated PPTP VPN client supporting username/password-based
authentication.
• Ability to establish vSpace sessions on vSpace Servers using custom UXP port
numbers.
• Support for HID DigitalPersona fingerprint readers in vSpace Client, RDP
Client, and VERDE VDI Client operation modes.
• Ability to automatically start published RemoteApp resources.
• Reset to factory defaults button.
• Option to allow/disallow non-ASCII characters in usernames and passwords
for RDP and VERDE connection settings.

Other improvements introduced in RX300 firmware version 3.8.1:

• Improved error handling for RDP sessions.

• Country selection for Wi-Fi configuration to enable/disable available Wi-Fi
channels.
• Possibility do upload certificate files with any file name extension.

The following RX300 firmware issues have been fixed in version 3.8.1:

• RX-1782 - Fixed the issue where resetting to factory defaults has no effect
for keyboard language setting.
• RXRDP-413 – Fixed the issue where Wi-Fi channels 12 and 13 are not visible
in Wi-Fi scan results.
• RX-1778 - Fixed a rare issue where the device GUI would get stuck based on
certain Ethernet configuration.

PREVIOUS RELEASE NOTES (VSPACE PRO ENTERPRISE EDITION 12 .3.0)

vSpace Pro Enterprise Edition version 12.3.0 is a major product release that replaces
the previously released version 12.2.2, as well as all earlier Enterprise Edition
versions. This version carries over all features and enhancements from the previous
vSpace Pro Enterprise release versions.

vSpace Pro Enterprise Edition version 12.3.0 comes with the following enhancements
and bug fixes:

vSpace Server component:

• Support for repurposed PCs and laptops running NComputing LEAF OS.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 18
 • New NComputing display driver (based on the Remote Indirect Display Driver
model) to ensure compatibility with upcoming Windows OS updates.

vSpace Console improvements:

• Ability to manage repurposed PCs and laptops running NComputing LEAF OS,
which includes LEAF OS user session management, LEAF OS device
management and firmware updates.

Following are the new product features introduced in RX300 firmware version
3.6.5 which comes with vSpace Pro Enterprise Edition (12.3.0) release:

• Troubleshooting information collector tool

Other improvements introduced in RX300 firmware version 3.6.5:

• Improved device configuration settings applying routines for PMC

• VERDE client improvement to report more device details to VERDE server

The following RX300 firmware issues have been fixed in version 3.6.5:

• RX-1755 – Inaccurate message about ‘Empty group’ after applying profile

from vSpace Console.
• RX-1753 – User authentication may fail in RDP Client mode when user name
is specified as UPN.
• RX-1752 – RemoteApp connection fails when RD Session Host is using a non-
standard port number.

PREVIOUS RELEASE NOTES (VSPACE PRO ENTERPRISE EDITION 12.2.2)

vSpace Pro Enterprise Edition (version 12.2.2) is a maintenance update that replaces
vSpace Pro Enterprise Edition (version 12.1.0) and earlier Enterprise Edition
versions.

This latest version comes with the following enhancements and bug fixes:

vSpace Server component:

• (RDSL-7231) Fixed the issue where installing vSpace Pro Enterprise Edition
on Windows Server 2008 R2 host machine would result in black screen when
manually login on the host machine.

vSpace Console improvements:

• Fixed an issue where vSpace Console could not connect to vSpace Manager
in Windows Server 2008 R2 and Windows 7.
• (VCON-947) Improved RX300 serial number presentation in vSpace Console.
• Additional performance optimization and stability improvement.

Following are the new product features introduced in RX300 firmware version
3.6.0 which comes with vSpace Pro Enterprise Edition (12.2.2) release:

• 802.1x network authentication support on Ethernet interface.

• Remote Desktop Gateway support for RDP connections.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 19
 • Native redirection of ReinerSCT cyberJack smart card readers.
• Support for vSpace for Linux.
• User experience settings for RDP connections.
• Date and time saving on device shutdown and restoring on device bootup.
• History collection for manually entered RemoteApp RD Web Access URLs.

Other improvements introduced in RX300 firmware version 3.6.0:

• FreeRDP client updated to the latest stable version.

• Username field validation in Kiosk Mode / User auto-logon configuration.
• Username field auto-population on logon screens.
• Domain field auto-population on RDP/RemoteApp logon screen.
• Improved input fields focusing rules on logon screens.
• Improved error handling when RemoteApp support is enabled.
• Internet Proxy support for VERDE VDI connections.
• Support for ext2, ext3, and ext4 file systems on locally mounted USB storage
devices (used for native redirection or installation of certificates).
• Updated NComputing Pi Zero SDA firmware.
• Network connection loss detection for vSpace sessions.
• Increased video playback smoothness during vCAST Media Streaming with
VLC player 3.0.6.
• Displaying the wallpaper during firmware update installation.
• Cosmetic changes and spelling improvements in the GUI.

The following RX300 firmware issues have been fixed in version 3.6.0:

• RX-1732 – Dual screen: When using touchscreen as primary display with

position set to ‘Second’ and the Pi0 SDA as secondary display the
touchscreen events are applied to secondary display.
• RX-1731 – Device fails to connect to PMC through auto-detected address
when the DHCP reply is delayed.
• RX-1730 – Possibility to freeze the RX300 device when user presses the Sleep
button when the auto-connect countdown reaches zero
• RX-1722 – Unplugging Ethernet when vSpace client is connected to vSpace
Server ends with frozen session.
• RX-1715 – Device gets stuck without GUI when HTTP URL will be specified as
RD Web Access URL.
• RX-1673 – WiFi interface remains active after scanning WiFi networks.
• RX-1665 – Touchscreen doesn't work when USB SDA adapter is connected.
• RX-1655 – Syslog gets spammed with "'action 17' suspended" messages.
• RX-1654 – Kiosk Mode application and application directory are not excluded
from xfreerdp arguments when launching RDP RemoteApp programs.
• RX-1649 – Setup GUI allows saving an empty administrator password.
• RX-1643 – Green LED does not indicate SD card activity anymore after using
the sleep/power button to wake the device up from sleep mode.
• RX-1641 – USB composite devices do not redirect into VERDE/RDP sessions
(with Incentives Pro VID:PID list redirection)
• RX-1639 – [Dual display] RX300 + Pi0 SDA: session disconnect in less than a
minute from logon.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 20
 • RX-1631 – Some keyboard shortcuts are blocking mouse and keyboard events.
• RX-1630 – User does not get logged out from RemoteApp list if screen saver
action is set to "Disconnect sessions..."
• RX-1629 – ntfs-3g deb package for NTFS filesystem will not be installed if
firmware update starts on firmware older than version 3.2.16.
• RX-1628 – Loss of PMC connection after disabling WiFi if autodiscovered PMC
address was in use.
• RX-1626 – Device is collecting wallpapers instead of replacing old wallpaper
with the new one.
• RX-1619 – VNC screen shadowing stops working after display resolution
change.
• RX-1607 – Inability to use VNC if it was turned on at the same time when
reconfiguring screen resolution.
• RX-1602 – RemoteApp: All icons presented by task-switcher are identical.
• RX-1595 – vCAST Web Streaming waits in infinite loop on some Vimeo videos.
• RX-1591 – DisplayLink adapter doesn't work after waking the device up from
sleep mode.

Previous release notes (vspace pro enterprise edition 12.1.0 vSpace Pro Enterprise
Edition (version 12.1.0) is a maintenance update that replaces vSpace Pro Enterprise
Edition (version 12.0.2) with the following enhancements and bug fixes:

• vSpace Server:
o RDSL–7200 - Support for Windows 10 compatibility up to version 1903
(May 2019 Update)
o RDSL–7206, RDSL–7207 - Fixed the issue with dual display on
Windows 7 and Windows 2008 where the mouse pointer does not
move to the second screen and desktop icons are displayed on the
second screen.

• vSpace Console:
o RDSL-7202 - Fixed the issue where the Multiview application cannot
be opened from the system tray with a pre-defined passcode.

For customers with active Annual Maintenance Program (AMP) plans vSpace Pro
Enterprise Edition adds the following new product features:

• Support for Windows Server 2019.

• Support for multi-touch monitors.
• Support for smart boards/interactive whiteboards.
• Support for more than 100 concurrent terminal sessions.
• Enhanced vSpace Console software to manage user sessions/devices for
large deployments.
• Enhanced audio protocols for L-series, M-series and MX-series thin clients.
• Enhanced health monitoring service for vSpace Pro deployment.

Following are the new product features introduced in RX300 firmware version 3.4.9:

• Support for RemoteApp and Desktop connections.

• Support for native (functional) redirection of printers in RDP sessions.
• Support for VNC screen shadowing.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 21
 • Ability to setup a desktop wallpaper.
• Enhanced single- and multi-touch screen and smart board support
• Calibration tool for touch screen monitors.
• Enhanced vCAST Web Streaming with Vimeo support.
• Enhanced vCAST VLC Media Streaming with NComputing SDA support.
• PMC connection status display.
• Ability to select screen saver action.
• Lock-up of the ‘Domain’ field on the logon screen if a domain name is pre-
configured in Kiosk Mode settings.
• Additional splash screen at the early stage of device boot-up process.
• Ability to configure ‘Custom RDP parameters’ for RDP connections in VERDE
VDI Client mode.
• Improved behavior of the logon screen in VERDE VDI Client mode when the
‘Allow using custom VERDE Connection Brokers’ option is enabled.
• Cosmetic changes and spelling improvements in the GUI.

PREVIOUS RELEASE NOTES (SINCE VSPACE PRO 11.X AND VSPACE PRO
ENTERPRISE EDTION 12.0.2):

The following vSpace Server component issues have been fixed in this product
version:

• RDSL-7152, RDSL-7157 – Session does not appear on clients - only black

screen (Windows Server 2016, Windows Server 2019).
• RDSL-7146 – Server does not send KeepAlive messages to RX300 after
reconnecting to previously disconnected session.
• RDSL-7028 – Audio stops working in VLC player (used without vCAST) after
changing playback position by clicking the progress bar.

The following vSpace Console issues have been fixed in this product version:

• VCON-943 – Sessions do not appear in vSpace Console Sessions view.

• VCON-940 – vSpace Console crash when trying to open old RX300 profile
created by previous Console.
• VCON-939 – vSpace console fails to start MultiView window.
• VCON-938 – vSpace Console crashes occasionally when changing RX300
3.2.13 firmware settings.
• VCON-937 – Incorrect registration status when connecting vSpace Console to
remote vSpace manager.
• VCON-887 – Empty Session column in Devices view (sessions are not assigned
to devices).
• VCON-842 – Delay before displaying Premium Features.
• VCON-834 – Closed disconnected sessions do not disappear from session list
after disconnection session cleanup timeout elapses.
• VCON-823 – Error saving Health Monitor settings when vSpace Server is on a
different computer than vSpace Manager.
• VCON-803 – Dynamic refresh of vSpace Console data.
• VCON-801 – vSpace Console hangs after Multisuer service crash.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 22
 • VCON-792 – Incorrect behavior when vSpace Manager gets unavailable and
then comes back.

The following RX300 firmware issues have been fixed in version 3.4.9:

• RX-1614 – GUI termination due to receiving the SIGUSR1 signal just after
boot.
• RX-1525 – VERDE Client: Domain name disappears when username is being
entered.
• RX-1506 – Static IP Configuration: No error message is displayed if alphabetic
characters are entered.
• RX-1460 – Some special Japanese keys do not work in vSpace sessions.
• RX-1458 – Connections to VERDE VDI or vSpace Servers fails after switching
Network from Wireless to Ethernet (and vice-versa).

The following L-series firmware issues have been fixed in version 1.15.8:

• TT-794 - vSpace Console displays unknown characters when kiosk mode is

enabled but with empty user name and password.
• TT-790 - After firmware update to version 1.15.5 user name and password
are corrupted.
• TT-788 - Client only reacts after 3 minutes when vSpace Server goes down or
a network issue occurs.
• TT-787 - Auto-connect to the server group has a 3 minutes delay when
vSpace Server is in different subnet than L300 device.
• TT-783 - User autologin does not work with user names longer than 20
characters.
• TT-782 - Incorrect characters in user name after updating L300 firmware to
1.15.2.

KNOWN ISSUES:

• Please refer to https://support.ncomputing.com/portal/kb for known issue

details.

GENERAL INSTALLATION INSTRUCTIONS:

New vSpace Pro Enterprise Edition installations should be performed on machines

with fresh installs of supported Windows OS versions. vSpace Pro Enterprise Edition
relies on Remote Desktop Services thus the Remote Desktop Services must remain
enabled after vSpace Server installation to ensure correct system operation. When
installing vSpace Pro Enterprise Edition on a standalone Windows Server (not
belonging to Active Directory domain) the Remote Desktop Services will be
automatically enabled during vSpace Server installation. When installing vSpace Pro
Enterprise Edition on a Windows Server joined to an Active Directory domain the
Remote Desktop Services must be enabled prior to vSpace Pro Enterprise Edition
installation.
Any application software should be installed after completing vSpace Pro Enterprise
Edition installation and rebooting the system.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 23
 Refer to ‘vSpace Pro Quick Installation Guide’ for more detailed installation
instructions.

UPGRADING INFORMATION:

vSpace Pro Enterprise Edition can only be installed on machines running supported
Windows OS, where no vSpace Pro 10.x nor vSpace Server 8.x is installed, as
upgrades from these versions are not supported. Upgrades from vSpace Pro 11.0
(version released to selected customers only), 11.1,11.2, and 11.3 LTS, as well as
from earlier versions of vSpace Pro Enterprise Edition versions 12.x are supported.

LEAF OS MANAGEMENT:

vSpace Console included in this vSpace Pro Enterprise Edition release can only
manage a subset of LEAF OS configuration settings. For full LEAF OS feature set
management, the separate PMC Endpoint Manager system should be used.

LEAF OS CONNECTION LICENSE & TRIAL MODE:

LEAF OS is compatible with vSpace Pro Enterprise Edition (version 12.5.4 and
above). LEAF OS software can be downloaded and try for free.

By default, vSpace Pro Enterprise Edition provides a LEAF OS trial mode of up to five
10-minute vSpace concurrent sessions. After 10 minutes, the session will be ‘signed
out’. You can sign-in again to continue evaluating the product.

To remove the five 10-minute vSpace concurrent session limit, LEAF OS Connection
Licenses are required based on the number of LEAF OS computers concurrently
connected to vSpace Pro Enterprise Edition sessions.

Please note that AMP compliance is required to use vSpace Pro Enterprise. LEAF OS
Connection Licenses are available with the following SKUs:

• 1 year (vSpacePro-LeafOS-1A)
• 3 years (vSpacePro-LeafOS-3A)
• 5 years (vSpacePro-LeafOS-5A)

RX300 AND RX300+ FIRMWARE:

This vSpace Pro Enterprise Edition comes with RX300 and RX300+ firmware version
4.4.0. For correct operation with this vSpace Pro version and to ensure best
performance and remote management all RX300 and RX300+ devices need to be
upgraded to firmware version 4.4.0.
vSpace Console included in vSpace Pro Enterprise Edition can only manage a subset
of RX300 and RX300+ configuration settings. For full RX300 and RX300+ feature set
management the separate PMC device management system should be used (requires
active Annual Maintenance Program).
Important note:
The RX300 firmware upgrade to version 4.4.0 can only be applied to RX300 firmware
version 4.0.5 or a higher version.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 24
 If you have RX300 firmware version 3.x or 2.x, you must first upgrade to 4.0.5
firmware before you can upgrade again to a higher firmware version. This is due to
the fact that in RX300 firmware version 4.0.5 we have eliminated the Raspbian
Desktop operation mode and subsequent firmware upgrades are only possible when
upgrading from 4.0.5 or a higher firmware version.
For convenience purposes, NComputing has provided the following HTTP URL which
can be used for the RX300 4.0.5 firmware update:
http://firmware.ncomputing.com/RX300/rx300-4.0.5.upd

RX-RDP+, RX420(RDP) AND RX440(RDP) FIRMWARE:

RX-RDP+ and RX420(RDP) endpoints are compatible with vSpace Pro Enterprise
Edition (version 12.4.0 and above). RX440(RDP) endpoint is compatible with vSpace
Pro Enterprise Edition (version 12.7.4 and above).

By default, vSpace Pro Enterprise Edition provides a vSpace trial mode of up to five
10-minute vSpace concurrent sessions, including RX-RDP+, RX420(RDP) and
RX440(RDP) endpoints. After 10 minutes, the session will be signed out. You can
sign-in again to continue evaluating the product.

To remove the five 10-minute vSpace concurrent session limit for RX-RDP+,
RX420(RDP) and RX440(RDP), vSpace Pro Client Licenses are required based on the
number RX-RDP+, RX420(RDP) and RX440(RDP) concurrently connected to vSpace Pro
Enterprise Edition sessions.

Please note that AMP compliance is required to use vSpace Pro Enterprise. vSpace
Pro Client Licenses are available with the following SKUs:

• vSpacePro-SW-1A (1 year)
• vSpacePro-SW-3A (3 years)
• vSpacePro-SW-5A (5 years)

vSpace Console included in this vSpace Pro Enterprise Edition release can only
manage a subset of RX-RDP+, RX420(RDP) and RX440(RDP) configuration settings. For
full RX-RDP+, RX420(RDP) and RX440(RDP) feature set management, the separate
PMC device management system should be used.

L-SERIES FIRMWARE:

This vSpace Pro Enterprise Edition comes with L-series (L250/L300/L350) firmware
version 1.15.8. For correct operation with this vSpace Pro version and to ensure best
performance and device management all L-series devices need to be upgraded to
firmware version 1.15.8.

The new L400 thin client (any firmware version) is supported by vSpace Pro
Enterprise Edition (version 12.7.4 or newer).

M/MX-SERIES FIRMWARE:

This vSpace Pro Enterprise Edition comes with M/MX-series firmware version 2.4.8.
For correct operation with this vSpace Pro version and to ensure best performance

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 25
 and remote management all M/MX-series devices need to be upgraded to firmware
version 2.4.8.

ADDITIONAL NOTES AND WORKAROUNDS:

• ‘UXP Turbo’ protocol

vSpace Pro Enterprise 12.7.1 and higher versions support the new ‘UXP
Turbo’ protocol to further enhance the desktop delivery experience for
multimedia intensive use cases.
To enable ‘UXP Turbo’ protocol: Launch Space Console > ‘Manage Servers’ >
select the target vSpace server > ‘Settings’ tab > select ‘Enable UXP Turbo
Protocol’ and click ‘Apply’.
The ‘UXP Turbo’ protocol is supported on vSpace host machines Windows
Server 2022, Windows 10 or Windows 11 operating systems.
The supported clients include RX300 (version 4.2.2 or higher), RX420(RDP)
and RX-RDP+ (version 3.2.4 or higher), and LEAF OS devices (version 3.2.4 or
higher).
• Native (functional) redirection of webcams in vSpace sessions
vSpace Pro Enterprise 12.5.2 and higher versions support native webcam
redirection functionality. On Windows Server 2016, 2019 and on Windows 10,
each user, under Privacy settings, needs to allow the applications to access
the redirected camera.

• Enhanced audio protocol for L-series, M-series and MX-series thin clients
vSpace Pro Enterprise Edition comes with enhanced audio protocols for the
above thin clients to provide better audio delivery including website video
content and flash video content.

(a) In the case if the user still experiences interrupted and/or distorted
audio quality during rich-content playback (e.g. Flash content), please
refer to the instruction below to modify the registry key value to further
improve the audio quality:
Add the variable “PollingTimeout” in the “HKLM\SYSTEM\CurrentControl
Set\Control\MultiUser" key in the registry.

1. By default, “PollingTimeout” is set at 20 milliseconds.

2. Increase this value to 40 milliseconds to check for audio quality
improvement.
3. If further audio quality improvement is needed, increase this
value to a maximum of 60 milliseconds without affecting the
user experience.

Note: The “PollingTimeout” registry value needs to be in 32-bit D-

word value. The value is represented in milliseconds (i.e. 1000 = 1
second)

(b) In the case if the user wants to revert back to the previous audio
protocol used in vSpace Pro 10.x or 11.x for their L-series, M-series or
MX-series thin client, please follow the instructions below:
1. To revert L-series thin client audio protocol to the previous
vSpace Pro 10.x or 11.x method:

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 26
 HKLM\SYSTEM\CurrentControlSet\Control\Multiuser\VDM\LVAudio\
AudioL300

Change the “_Protocol Id” from “1” (new protocol) to “0”

(legacy protocol)

2. To revert M-series thin client audio protocol to the previous

vSpace Pro 10.x or 11.x method:

HKLM\SYSTEM\CurrentControlSet\Control\Multiuser\VDM\LVAudio\
AudioM300

Change the “_Protocol Id” from “1” (new protocol) to “0”

(legacy protocol)

3. To revert MX-series thin client audio protocol to the previous

vSpace Pro 10.x or 11.x method:

HKLM\SYSTEM\CurrentControlSet\Control\Multiuser\VDM\LVAudio\
AudioMX100

Change the “_Protocol Id” from “1” (new protocol) to “0”

(legacy protocol)

• Support for USB signature pad models:

Following are USB signature pad models which have been pre-configured in
vSpace Pro 11.3 server (and later versions) with proper server isolation (i.e.
user A will not see the signature pad connected to user B).
On RX-series thin client, generic USB redirection policy must be applied to
the connected signature pad for the peripheral to be recognized by vSpace.
This can be done in RX-series device Setup > Peripherals > Custom VID:PID.
Enter the VID and PID of the connected signature pad so this peripheral will
redirect to the vSpace Server.
o VID:PID: 056A:00A1 Model: WACOM STU-500
o VID:PID: 056A:00A2 Model: WACOM STU-300
o VID:PID: 056A:00A3 Model: WACOM STU-520A
o VID:PID: 056A:00A4 Model: WACOM STU-430
o VID:PID: 056A:00A5 Model: WACOM LCD Signature Pad STU-530
o VID:PID: 056A:00A6 Model: WACOM STU-430V
o VID:PID: 056A:00A7 Model: WACOM LCD Signature Pad STU-530V
o VID:PID: 056A:00A8 Model: WACOM LCD Signature Pad STU-540
o VID:PID: 056A:00A9 Model: WACOM LCD Signature Pad STU-541
o VID:PID: 0403:6001 Model: Topaz Signature Gem T-LBK462-BSB-R
o VID:PID: 06A8:0043 Model: Topaz Signature Gem T-L462-HSB-R

• Native (functional) redirection of smart card readers

Functional redirection of smart card readers leverages the PC/SC daemon
and smart card reader drives embedded in the device firmware. Please refer

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 27
 to RX-series device firmware Release Notes for list of smart card reader
drivers that are supported with native redirection.

• vCAST Media Streaming

vCAST Media Streaming supports up to and including VLC Player version
3.0.6.

• The ‘USB Audio Redirection’ option on L-series firmware

By default the “USB Audio Redirection” option in the L-series firmware is
not enabled, this is the recommended configuration. vSpace Server
sessions will default to use the ‘NComputing virtual audio device’ for
playback and recording of locally connected USB headset (or other USB
audio device) to an L-series client. This is the simplest and recommended
setup. In this case when both USB and analog headset are simultaneously
connected to an L-series client, the client device will default to use the
connected USB headset for all audio playback and recording.
With “USB Audio Redirection” enabled vSpace provides redirection of the
USB audio device to the host Windows server and uses the host servers
appropriate Windows audio device driver for playback and recording to and
from USB audio devices that are connected to an L-series device. In this case
the users Windows session will report the USB audio device name in the
Windows device manager alongside the ‘NComputing virtual audio device’.
With the ‘USB Audio Redirection’ option enabled the user in his/her vSpace
Server session can access two audio devices:
1) the ‘NComputing virtual audio device’ (with input/output assigned to
the L-series’ integrated audio jacks),
2) the locally connected USB audio device with its original name.
Using a USB headset (or other USB audio device) with the ‘USB Audio
Redirection’ option turned on usually allows a higher audio sampling rate
(which should result in improved sound quality), but also consumes
increased network bandwidth as larger amounts of audio data are required
to be transferred between the vSpace Server and the client device. As USB
audio devices tend to be timing sensitive, the sound may occasionally get
choppy or stutter if the network is not able to sustain the audio data traffic
data rates in a busy network environment. In some circumstances, where
L350 devices are used with HD monitors, in rare occasions it is possible for
audio playback to be disabled when playing web videos, if you experience
this problem you will need to re-boot your L350 access device. For this
reason, we do not recommend using USB Audio redirection with L350 access
devices.

• Truncation of the last few seconds of sound recording

Under certain system and network conditions, when recording sound without
enabling the ‘USB Audio Redirection’ option, the recording start time may
be delayed and the last few seconds of the recording might be truncated.
This happens because the client device buffers voice data prior to it being
sent to vSpace Server. The keyboard and mouse events however will be sent
immediately, without buffering. This results in the sound recording
application to receive the “stop recording” event before receiving all the

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 28
 recorded data. To avoid the possibility of truncated recordings users should
wait a second or two after finishing the recording before stopping a
recording. To minimize this effect, the UseAdvancedMicThread REG_DWORD
value can also be set to 0 in the
HKLM\SYSTEM\CurrentControlSet\Control\Multiuser registry key on the
vSpace Server.

• HTML5 video playback with Internet Explorer 11

To ensure successful playback of HTML5 videos on Windows Server 2008 R2
the Desktop Experience feature and an update for the Desktop Experience
Decoder must be installed.
See: https://support.microsoft.com/en-us/kb/2483177 for more details.

• Power Plan settings of vSpace Server

When using vSpace Server, especially on desktop versions of Windows OS,
the Power Plan settings should be configured in a way, which will never
allow the hard disks to be turned off or the computer to enter the sleep or
hibernation state after a period of inactivity.

• Using a physical host with AMD/ATI GPU

When using a physical host with AMD/ATI GPU it’s advisable to install the
video driver only, without the Catalyst Control Center (CCC.exe) utility. This
would prevent potential memory leak in AMD’s Catalyst Control Center
which may affect system instability.

CONTACTING TECHNICAL SUPPORT AND ADDITIONAL RESOURCES

• Visit the NComputing vSpace Pro website to learn about the benefits and common FAQs for
vSpace Pro Enterprise Edition
• Learn more about NComputing’s Annual Maintenance Program (AMP) and its benefits:
https://www.ncomputing.com/products/vSpace/vSpace%20Pro%20Annual%20Maintenance%2
0Plan
• Please use the following link to review the updated terms in the NComputing end user
license agreement for vSpace Pro:
https://support.ncomputing.com/portal/kb/articles/ncomputing-software-eula
• Visit the NComputing Knowledge Base at https://support.ncomputing.com/portal/kb for
more information, guides, and walkthroughs.
• To request Technical Support, please visit the NComputing Support page at
https://www.ncomputing.com/support/support-options

Disclaimer

Information contained in this document may have been obtained from internal testing or from a
third party. This information is for informational purposes only. Information may be changed or
updated without notice. NComputing reserves the right to make improvements and/or changes in
the products, programs and/or specifications described herein anytime without notice.

All NComputing software is subject to NComputing intellectual property rights and may be used only
in conjunction with Genuine NComputing hardware and in accordance to the NComputing End User
Licensing Agreement and Terms of Use.

www.ncomputing.com

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 29
© Copyright 2025 NComputing Global, Inc. All rights reserved. NComputing is the property of NComputing
Global, Inc. Other trademarks and trade names are the property of their respective owners. Specifications are
subject to change without notice. Performance may vary, depending on the configuration of the shared
computer.

VSS120902RN01
vSpace Pro Enterprise Edition (version 12.9.2) – Release Notes Page 30