Scribd
Upload
25 views1 page

S-LINE Pre-Insulated Tubing Solutions

S-LINE® pre-insulated tubing is designed for steam, condensate, liquid, and gas transport lines of 3/4” and smaller, providing an economical alternative to field insulation and weatherproofing. It enhances personnel protection by reducing exposure to hot tubing and minimizes leak points through fewer fittings. The product features include weatherproofing, energy conservation, and various sizes and materials available upon request.

Uploaded by

a4081446
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views1 page

S-LINE Pre-Insulated Tubing Solutions

S-LINE® pre-insulated tubing is designed for steam, condensate, liquid, and gas transport lines of 3/4” and smaller, providing an economical alternative to field insulation and weatherproofing. It enhances personnel protection by reducing exposure to hot tubing and minimizes leak points through fewer fittings. The product features include weatherproofing, energy conservation, and various sizes and materials available upon request.

Uploaded by

a4081446
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

S-LINE®

Pre-Insulated Tubing

S-LINE is suggested for steam, condensate, liquid and gas


transport lines 3/4” and smaller where personnel protection and
heat loss are important. S-LINE offers an inexpensive alternative
to field insulation and weatherproofing of small diameter lines.

SAVE TIME SAVE MONEY PERSONNEL


Reduced installation Inexpensive alternative PROTECTION
time and labor with to field insulation and Increase personnel
S-Line pre-insulated weather proofing small protection from
tubing. Reduce leak diameter tubing. exposed hot tubing.
points by minimizing
fittings.

`` Save time and labor when installing lines 3/4”


and smaller
`` Reduce fittings with long coils
`` Eliminate leak paths from screwed and
Model Number
compression fittings associated with stick Other materials and sizes available on request.
tubing SA2 1/4” x 0.035 wall welded 316SS
`` Easy installation SA3 3/8” x 0.035 wall welded 316SS
SA4 1/2” x 0.035 wall welded 316SS
TYPICAL APPLICATIONS SE4 1/2” x 0.049 wall welded 316SS
SF1 1/8” x 0.035 wall seamless 316SS
`` Steam supply lines SF2 1/4” x 0.035 wall seamless 316SS
`` Condensate return lines SF3 3/8” x 0.035 wall seamless 316SS
`` Small diameter process lines SF4 1/2” x 0.035 wall seamless 316SS
SB2 1/4” x 0.049 wall seamless 316SS
PRODUCT FEATURES SB3 3/8” x 0.049 wall seamless 316SS
SB4 1/2” x 0.049 wall seamless 316SS
`` Personnel protection SB6 3/4” x 0.049 wall seamless 316SS
`` Weatherproofing SJ2 1/4” x 0.030 wall copper­
`` Energy conservation SC3 3/8” x 0.032 wall copper
SD4 1/2” x 0.035 wall c­­opper
SM4 1/2” x 0.049 wall copper
JACKET SM6 3/4” x 0.049 wall copper
`` SV47 PVC
`` UV resistant Accessories:
TPKHS-E1 Heat shrink end seal
INSULATION
`` Fibrous Glass Optional jacket colors subject to
`` Water soluble chloride < 45 ppm minimum order quantities.
`` Non-hygroscopic

Support Brackets
Allow bundles to be stacked vertically in tray.
`` SRBBB - 8” stainless steel bundle brackets are
designed to be used with 1/2” wide (12mm) band
clamps. Maximum load is 35 lbs (16kg).
`` SRBL-KR - 50’ of ½” wide black 400# cut-to-length
strap and 25 buckles for use with 8” bundle bracket.

© 2019, by AMETEK, Inc. All rights reserved • QLT-SLINE • 1 FEB 2019

BELGIUM • CHINA • JAPAN • RUSSIA • SINGAPORE • SOUTH KOREA • USA


[email protected] • www.obcorp.com

You might also like