Scribd
Upload
42 views3 pages

Bosch High-Pressure Sensors Overview

The document provides specifications for high-pressure sensors capable of measuring up to 200 MPa, highlighting features such as ratiometric signal evaluation, media resistance, and protection against electrical faults. It details the application of these sensors in automotive braking systems and fuel rails, as well as their design using polysilicon thin-film metal strain gauge elements. Additionally, it outlines storage conditions, technical data, and available accessories for the sensors.

Uploaded by

me20d009
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
42 views3 pages

Bosch High-Pressure Sensors Overview

The document provides specifications for high-pressure sensors capable of measuring up to 200 MPa, highlighting features such as ratiometric signal evaluation, media resistance, and protection against electrical faults. It details the application of these sensors in automotive braking systems and fuel rails, as well as their design using polysilicon thin-film metal strain gauge elements. Additionally, it outlines storage conditions, technical data, and available accessories for the sensors.

Uploaded by

me20d009
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

0 281 002 755 1/3

High-pressure sensors
Measurement up to 200 MPa

• Ratiometric signal evaluation


(relative to supply voltage)
• Self-monitoring offset and
sensitivity.
• Excellent media resistance as the
medium only comes into contact
with stainless steel.
• Resistant to brake fluids, mineral
oils, fuel, water and air.
• Protection against reverse polarity,
overvoltage and short circuit at the
output to the supply voltage or
ground.

Application For 0 265 005 303:


Pressure sensors of this type are used in Î 0,75
motor vehicles to measure the pressure à 0,12 · p / ‚
in a braking system or in the fuel rail of
engines with direct gasoline injection or
the diesel common rail system.

Design and operation


Polysilicon thin-film metal strain gauge
elements are used. These are connected
to form a Wheatstone bridge. This
permits good signal utilization and
temperature compensation. Only for 0
265 005 303
The following additional diagnostic
function distinguishes this sensor from
conventional sensors:
Comparison of two signal paths in the
sensor enables
– Offset error
– Amplification error
to be detected.

Storage conditions
Temperature range: -30...+60 °C
Rel. humidity: 0...80 % rF
Maximum storage time: 5 years
The specified storage conditions do not
cause any change in function.
The sensors are no longer to be used
once the maximum storage time has
expired.

Explanation of characteristic
quantities
U Output voltage
u Supply voltage
bar Pressure
] Feed voltage
p Pressure [MPa]
ë 0.1
à 0.8/Pn MPa!
‚ Rated pressure [MPa]

Robert Bosch GmbH


Automotive Aftermarket
Postfach 410960
76225 Karlsruhe
Germany

www.bosch-sensoren.de
0 281 002 755 2/3

Part number 0 281 002 755


Technical data
Pressure range ‚ bar (MPa)
2000 ( 200 )
Pressure-sensor type RDS4.1
Thread M 18 x 1,5
Connectors Compact 1.1
Pin Gold-plated
Application/medium Diesel fuel or biodiesel 2)
Max. feed voltage j V
16
Supply voltage u V
5 + 0,25
Supply current K mA
9...15
Load capacitance to ground nF
10
Temperature range °C-
40 ...+ 130
Max. overpressure í bar
230
Rupture pressure ï bar
400
Response time , ms
2
Accessories are not included in the scope of delivery of the sensor and are therefore to be ordered separately as required.

Dimensional drawing Characteristic curve

Pin 1 Ground
Pin 2 Output
Pin 3 Supply

U = (à + ë) · ]
O Oberer Bereich für Signal Range
Check SRC
U Unterer Bereich für Signal Range
Check SRC

Measurement circuit
0 281 002 755 3/3

Accessories Part number


Connector housing 1 928 403 968
Contact pins Contents: 100 x 1 928 498 054
Single-wire seal Contents: 10 x 1 928 300 599
Accessories are not included in the scope of delivery of the sensor and are therefore to be ordered separately as required.

You might also like