Horizontal Pump

6/4 AH
CURVE SHOWS APPROXIMATE PERFORMANCE FOR CLEAR WATER (International Test Standard ISO9906:1999 - Grade 2 unless otherwise specified). For media other than water,
corrections must be made for density, viscosity and/or other effects of solids. WEIR MINERALS reserves the right to change pump performance and/or delete impellers without notice. Frame
suitability must be checked for each duty and drive arrangement. Not all frame alternatives are necessarily available from each manufacturing centre.
60 Pump
FGD ACCEPTANCE CRITERIA ACCORDING TO
ISO 9906 WITH NO NEGATIVE TOLERANCE Discharge 102mm
Suction 152mm
Impeller
Vanes 6
Vane ø 400mm
50 1400 rpm 40% 60% Type Closed
65% Part No Material
70% E4058HE1 Metal
Frame (Rating - KW)
1300 rpm 75% D 60
DD 110
40
77.5% Seal
Y

Hr
1200 rpm
NC

NPS
Mechanical Sealed Pump
IC IE

75%
Head, H (m)

EFF

Liner (Norm Max r/min)

1100 rpm

4m
30 Polymer 1400
Min Passage Size

1000 rpm 32mm

Curve
Revision 2

3m
900 rpm Revision Notes
20
NEW TESTED PERFORMANCE
800 rpm Reference
TEST 52, 53, 56, 57
Last Issued Mar 98
2m

Issued Sep 05

10

© 3/2013 Weir Minerals Australia (PTC)

All Rights Reserved
50 100 150 200 250 300 350 400 450 TYPICAL PUMP PERFORMANCE CURVE

Flow Rate, Q (m³/hr) WPA64A010/2