TWI
Welding Inspection
BS EN 22553
Course Reference WIS 5
M.S.Rogers
TWI BS EN 22553. Welding Symbols
(ISO 2553)
Reference lines
Arrow line
Other side Arrow side
Arrow side Other side
M.S.Rogers
TWI BS EN 22553. Welding Symbols
(ISO 2553)
Other side
Both sides
Arrow side
M.S.Rogers
TWI BS EN 22553. Welding Symbols
(ISO 2553)
a b
c d
M.S.Rogers
TWI BS EN 22553. Welding Symbols
(ISO 2553)
Flat Convex
Concave Toes
shall be
blended
M.S.Rogers
TWI BS EN 22553. Welding Symbols
(ISO 2553)
Field weld (site weld) Welding to be carried out all
round component
(peripheral weld)
NDT WPS
The component requires Additional information, the
NDT inspection reference document is
included in the box
M.S.Rogers
TWI BS EN 22553. Welding Symbols
(ISO 2553)
a = Design throat thickness
z = Leg length
a = 0.7 of z
a4
4mm throat
a
z
b6
6mm leg
M.S.Rogers
TWI BS EN 22553. Welding Symbols
(ISO 2553)
n = number of weld elements
n x l (e) l = length of each weld element
(e) = distance between each weld
element
Welds to be
staggered
3 x 10 (20)
111
2 x 10 (20)
Process
M.S.Rogers
TWI BS EN 22553. Welding Symbols (ISO 2553)
MR
M
Single-V Butt with Single-U Butt with
permanent backing strip removable backing strip
Single-V Butt flush cap Single-U Butt with sealing run
M.S.Rogers
TWI BS EN 22553. Welding Symbols (ISO 2553)
Single-bevel butt Double-bevel butt
Single-bevel butt Single-J butt
M.S.Rogers
TWI
BS EN 22553. Welding Symbols (ISO 2553)
10
10
Partial penetration single-V butt
M.S.Rogers
TWI
Ans to BS EN 22553 Fillet Welds ex: 1
6
1. Welded arrow side: A continuous fillet weld
with a 6 mm leg length , toes to be blended
smoothly.
6 3 x 25 (40)
6 3 x 25 (40)
2. Welded both sides: Three intermittent fillet
welds with 6 mm leg lengths, the length of each 25 40 25 40 25
weld 25 mm and the distance between each
weld 40 mm.
3. Welded arrow sides: Three intermittent fillet 25 40 25 40 25
welds with 10 mm leg lengths, the length of each
10 3 x 40 (30)
weld 40 mm, the distance between each weld
6 3 x 50 (25)
30mm.
30 40 30 40 30 40
Welded other side: Three intermittent fillet
welds 6 mm leg lengths, the length of each weld
50mm and the distance between each weld
25mm, welds to be staggered. 50 25 50 25 50
8 3 x 25 (50)
4. Welded arrow side: Three intermittent fillet
welds with 8 mm leg lengths, the length of each 10 2 x 20 (40)
weld 25 mm and the distance between each 50
25 50 25 25
weld 50 mm.
Welded other side: Two intermittent fillet welds
with 10 mm leg lengths, the length of each weld
20 mm and the distance between each weld 40 20 40 20
40mm, welds to be staggered.
M.S.Rogers
TWI
Ans to BS EN 22553 Butt Welds ex: 1
M
1. Welded arrow side: Single „V‟ butt weld with permanent
backing strip, flat weld profile.
2. Welded other side: Single “U” butt weld, flat weld profile
10
3. Welded arrow side: Single “V” butt weld depth of
preparation 10 mm
Welded other side: Backing run. (Plate thickness 15 mm.)
12
12
8
4. Welded arrow side: Single “J” butt weld, depth of
preparation 12 mm with a 8 mm fillet weld superimposed.
(plate thickness 15 mm.
Welded other side: 12 mm leg length fillet weld.
M.S.Rogers
