PROP.

INLET CUT & COVER

HYDRAULIC ELEMENTS
Manhole in every 20 meters o.c. C A N A L
ELEM. UNIT
ABOVE BELOW

STA. 0 + 665.60

M A T C H L I N E
Q cu.m/s 0.1081 S
C C

B
V m/s 0.5408 A
A sq.m 0.224 M
700 b m. 0.70 E
d m. 0.321 A
D m. 0.60 S

B
t m. 0.60 A

M A T C H L I N E
r m. 0.1672 B

PROP. OUTLET CUT & COVER

S 0.0007 O
Ss vert. V.
Manhole in every 20 meters o.c.
n 0.015 E

STA. 0 + 665.60
P L A N
SCALE 1:100

Manhole in every 20 meters o.c.

ELEV. = (55.47) NEW ELEV. = 54.81

GENERAL NOTES:
GROUND · ALL DIMENSIONS ARE IN MILLIMETERS UNLESS
NATURAL
PROP. INLET CUT & COVER

(ELEV. = 53.23) NEW ELEV. = 52.57 OTHERWISE SPECIFIED.

· ALL CONCRETE SHALL BE 3000 PSI UNLESS

M A T C H L I N E
OTHERWISE SPECIFIED.
STA. 0 + 665.60

· CLEARANCE OF REINFORCING STEEL TO THE

NEAREST SURFACE OF CONCRETE SHALL BE 5
cm FOR FOUNDATIONS AND WARPED SURFACES,
REVISED ELEV.
TB ELEV. = 49.12 (TB ELEV. = 49.78) 7 cm FOR CONCRETE EXPOSED TO WATER, AND 4
WS ELEV. = 48.76 (WS ELEV. = 49.50) cm FOR OTHERS.
CB ELEV. = 48.52 (CB ELEV. = 49.18) ELEV. ELEV.
= (48.69) NEW ELEV. 48.03 = (48.67) NEW ELEV. 48.01 · LAPPING OF BARS SHALL BE 24d FOR DEFORMED
BARS AND 48d FOR PLAIN BARS; SPLICE SHALL
BE STAGGERED.
· ALL EXPOSED EDGES SHALL BE ROUNDED OR
CHAMFERED.
Manhole in every 20 meters o.c. · ALL BARS NOT OTHERWISE SPECIFIED SHALL BE
10 mm Ø SPACED @ 30 cm O.C. - B.W. OR 12 mm Ø
SPACED @ 45 cm O.C - B.W.
M A T C H L I N E

(ELEV. = 55.28) NEW ELEV. = 54.61

· ALL ELEVATIONS ARE IN METERS.
· ALL REINFORCING BAR SHALL BE DEFORMED (
COMFORMING TO ASTM A - 615 AND SHALL BE

PROP. OUTLET CUT & COVER

GRADE 40 ( Fy = 275 MPa) FOR 20 MM Ø BARS &
BELOW 25 MM Ø AND ABOVE, GRADE 60 (Fy = 414
NAT MPa) SHALL BE USED.

STA. 0 + 665.60
URA
LG
ROU
N D

(ELEV. = 50.33) NEW ELEV. = 49.65 150 1000 150

REVISED ELEV.
(TB ELEV. = 49.69) TB ELEV. = 49.03
(WS ELEV. = 49.41) WS ELEV. = 48.67
ELEV. ELEV. (CB ELEV. = 44.09) CB ELEV. = 48.43
= (48.65) NEW ELEV. 47.98 = (48.63) NEW ELEV. 47.97

SECTION A-A 150

SCALE 1:100

150 1000 150

12mm Ø RSB
LIFTING BAR
150 WS=700 150 600 700
CONSIDER 500mm from
N.G.L. ALL THROUGH
OUT
WS/4 WS/4
12mm Ø RSB
12mm Ø RSB
SP. @ 23 CM O.C. SP. @ 30 cm B.W.

150

VARIES REFER TO CUT AND

16mm Ø STEEL RUNG 150
HW/4
FILLET
10 cm x 10 cm
COVER PROFILE SP. @ 30 cm

12mm Ø RSB
15 X 15 FILLET 900
BARS 900
SP. @ 30 CM HW=600
O.C.
12mm Ø RSB
10mm Ø RSB
SP. @ 30 CM O.C. LIFTING BAR
150
HW/4

10mm Ø RSB
170
SP. @ 30 cm B.W.
300
12mm Ø RSB
12mm Ø RSB
SP. @ 18 CM O.C. 15 X 15 FILLET
SP. @ 30 CM O.C. 170 MANHOLE COVER
SCALE 1:10

12mm Ø RSB
SECTION B-B SP. @ 30 cm B.W.
SCALE 1:10
SECTION C-C
SCALE 1:20