Scribd
Upload
103 views3 pages

BP6904A

The BP6904A is a high voltage, high speed half-bridge pre-driver designed for power MOSFET and IGBT applications, capable of operating up to 600V. It features a single input for both high side and low side, internal dead time to prevent cross-conduction, and is compatible with various input logic levels. The device is available in an SOP8 package and operates within a temperature range of -40°C to 105°C.

Uploaded by

Михаил Керван
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
103 views3 pages

BP6904A

The BP6904A is a high voltage, high speed half-bridge pre-driver designed for power MOSFET and IGBT applications, capable of operating up to 600V. It features a single input for both high side and low side, internal dead time to prevent cross-conduction, and is compatible with various input logic levels. The device is available in an SOP8 package and operates within a temperature range of -40°C to 105°C.

Uploaded by

Михаил Керван
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

BP6904A

晶丰明源半导体 600V Half-Bridge Pre-Driver

Description Features
The BP6904A is a high voltage, high speed half- ◼ Floating channel operation up to 600V
bridge pre-driver for power MOSFET and IGBT. It ◼ Single input for high side and low side
has one input for high side and low side, and two ◼ Shut down input turns off both channels
output channels with internal dead time to avoid ◼ Robust at negative transient voltage
cross-conduction. ◼ Gate drive supply range from 10V to 20V
The input logic level is compatible with 3.3V/5V/15V ◼ 3.3V, 5V and 15V input logic compatible
signal. The floating high side channel can drive a N- ◼ UVLO for both high side and low side
channel power MOSFET or IGBT up to 600V. ◼ Built-in dead time
◼ Available in SOP8 package

Typical Application

Up to
600V
VCC

VCC VB
IN IN HO

SDb VS TO
SDb
LOAD
COM LO

Figure 1. Typical application circuit

BP6904A_EN_DS_Rev.1.0 www.bpsemi.com 1
BPS Confidential – Customer Use Only
BP6904A
晶丰明源半导体 600V Half-Bridge Pre-Driver

Ordering Information

Part Number Package Operation Package Method Marking


Temperature
Tape BP6904
BP6904A SOP8 -40 ℃ to 105 ℃ XXXXXYA
4,000 Piece/Roll XXWWX

Pin Configuration and Marking Information

XXXXXYA: lot code


VCC XXXXXYA VB XX: Fab code
WW：Week
IN HO
BP6904
XXWWX

X: Special code

SDb VS

COM LO

Figure 2. Pin configuration

Pin Definition

Pin No. Name Description


1 VCC Low side and logic supply voltage
2 IN Logic input for high side and low side, in phase with HO
3 SDb Logic input for shut down
4 COM Logic ground and low side driver return
5 LO Low side driver output
6 VS High side driver return
7 HO High side driver output
8 VB High side floating supply

BP6904A_EN_DS_Rev.1.0 www.bpsemi.com 2
BPS Confidential – Customer Use Only

You might also like