Product information PI 46/11/07/2018
Top Tec ATF 1800
Description
Low-viscosity high-performance oil of the new gener-
ation for automatic transmissions. It is based on syn-
thesis technology with modern, high-performance ad-
ditives. Aside from excellent ageing and oxidation sta-
bility, optimal shifting is guaranteed under all operat-
ing conditions thanks to the extremely high viscosity
index. It enables long oil change intervals.
Properties Technical data
- excellent viscosity/temperature properties Flash point 196 °C
- prevents foam formation DIN ISO 2592
- enables a multifaceted range of applications Color / appearance bräunlich/brownish
- stable to oxidation
Color number (ASTM) L 1,5
- outstanding friction characteristics
DIN ISO 2049
- high resistance to aging
- very good low-temperature properties
- excellent corrosion protection Areas of application
- high wear resistance Developed for ZF 6HP19/26/32 and ZF 8HP
- outstanding resistance to oxidation 45/55/70/90 type automatic transmissions that are in-
stalled in various Audi, BMW, Jaguar, Land Rover,
Specifications and approvals: Porsche, etc. vehicles. Meets further specifications,
Dexron VI ∙ Ford Mercon LV allowing it to cover an even wider range of vehicles.
LIQUI MOLY also recommends this product for Application
vehicles or assemblies for which the following The specifications and instructions from the as-
specifications or original part numbers are sembly or vehicle manufacturer must be followed!
required: Optimum effectiveness is only possible when the
Aisin Warner AW-1 ∙ BMW 83 22 0 142 516 ∙ BMW 83 product is used unmixed.
22 2 152 426 ∙ BMW 83 22 2 289 720 ∙ BMW 83 22 2
305 396 ∙ BMW 83 22 2 305 397 ∙ BMW M-1375.4 ∙ Fi- Available pack sizes
at 9.55550-AV5 ∙ JWS 3324 (Aisin Warner) ∙ Land 1 l Can plastic 3687
Rover TYK 500050 ∙ Honda ATF 3.1 ∙ Honda ATF DW-1 D-GB-I-E-P
∙ Hyundai SP IV ∙ Mazda ATF FZ ∙ Mitsubishi Dia
Queen ATF-PA ∙ Nissan AT-Matic S Fluid ∙ Toyota WS 1 l Can plastic 9704
∙ VW G 055 005 ∙ VW G 055 540 ∙ VW G 060 162 D-GB-F-ARAB
1 l Can plastic 20032
Technical data GB-F-E-USA-CAN
Density at 15 °C 0,845 g/cm³ 1 l Can plastic 2381
DIN 51757 D-RUS-UA
Viscosity at 40 °C 28,2 mm²/s 1 l Can plastic 20461
ASTM D 7042-04 D-PL-H-RO-TR
Viscosity at 100 °C 5,9 mm²/s 1 l Can plastic 21107
ASTM D 7042-04 D-GB-CN
Viscosity at -40°C (Brook- <= 10000 mPas 5 l Canister plastic 20662
field) ASTM D 2983-09 D-GB-I-E-P
Viscosity index 161 5 l Canister plastic 39020
DIN ISO 2909 D-RUS-UA
Pour point -45 °C 20 l Canister plastic 3688
DIN ISO 3016 D-GB-I-E-P
20 l Canister plastic 20034
GB-F-E-USA-CAN
LIQUIMOLY GmbH Postfach 2829 Phone: +49 (0)731/1420-13 Service-hotline: 0800/8323230
Jerg-Wieland-Str. 4 89018 Ulm Fax: +49 (0)731/1420-82 Technical hotline: +49 (0)731/1420-871
89081 Ulm-Lehr Germany e-mail:
[email protected] www.liqui-moly.de
Product information PI 46/11/07/2018
Top Tec ATF 1800
Available pack sizes
60 l Drum sheet metal 3689
D-GB
205 l Drum sheet metal 20624
D-GB
Our information is based on thorough research
and may be considered reliable, although not
legally binding.
LIQUIMOLY GmbH Postfach 2829 Phone: +49 (0)731/1420-13 Service-hotline: 0800/8323230
Jerg-Wieland-Str. 4 89018 Ulm Fax: +49 (0)731/1420-82 Technical hotline: +49 (0)731/1420-871
89081 Ulm-Lehr Germany e-mail:
[email protected] www.liqui-moly.de
