Granny Square

Hooded Coat
Cascade 220 ®
Designed by Deborah Newton

Crochet Pattern W879 - Intermediate

Sizes:
Small (Medium, Large, XL, 2XL, 3XL), to fit bust 32-34 (36-
38, 40-42, 44-46, 48-50, 52-54) (this coat has a a slightly
oversized fit, with 6-8” of ease)

Materials:
• Cascade Yarns® Cascade 220®: 100% Peruvian High-
land Wool; 100g (3.5 oz)/ 220 yds (200 m)
• 7 (7, 8, 8, 9, 9, 10) skeins #9499 Sand
• 1 skein color #2414 Ginger
• 1 skein color #2415 Sunflower
• 1 skein color #8393 Navy
• 1 skein color #9567 Smoke Blue
• 1 skein color #1004 Bristol blue
• 1 skein color #9681 Crabapple
• 1 skein color #2401 Burgundy
• Size US 7 (4.5 mm) Crochet hook, size to obtain gauge.
• Yarn needle

Abbreviations:
Finished Measurements:
Finished bust measurement, includes 2” band overlapped Stitch(es) = st(s)
42(46, 50, 54, 58, 62)” Length, from shoulder: 34.75” Chain stitch = ch st
Sleeve width upper arm: 18(18, 18, 23, 23, 23)” Chain space = ch-sp
Double Crochet = dc
Established = est
Gauge: Half double crochet = hdc
13 dc x 8 rows = 4” (10 cm), in Side Panel Pattern with Remain(ing) = rem
hook 7 (4.5mm); Each square should measures 4.25”. Take Single crochet = sc
time to check gauge. Slip stitch = sl st

Notes:
The hooded coat is made in these steps:

Thank you for downloading our free pattern. Find us

online at https://www.cascadeyarns.com or on social:

All images, text and illustration(s) © Cascade Yarns® 2023

1. Granny squares are made in 14 different color ch 3) three times. Join with a sl st to the top of first ch-3.
combinations. Round 2: Change to color 2 and ch 4. (This is the first dc
2. Squares are joined according to the layout in the and ch-1 space.)
schematic drawings for Fronts, Back, Sleeves and Hood. In the next ch-3 space (first corner space), work: 3 dc, ch 3,
3. Extended sections (called Side Panel pattern) are 3 dc, ch 1.
crocheted on each piece in the main color, Sand, after Rep last step twice more, for total of three times; then in
squares are joined. the last ch-3 space, work: 3 dc, 3 ch, 2 dc, then in with a sl
4. Fronts, Back, Sleeves and Hood are joined together. st to the 3rd chain of the beg ch sts.
5. Front trim is added. Round 3: Change to color 3 and ch 3. Then into ch-1
space just below in previous round, work 2 dc, ch 1 (to
make first cluster of this round); then into the next ch-3
Granny Squares: corner space, work: 3 dc, ch 3, 3 dc, ch 1; then into the
next ch-1 space, work: 3 dc, ch 1.
Notes:
Rep around to the beg chain, join with a sl st to the top of
1. There are 14 different Granny squares.
the ch-3 at start.
2. Colors for each square are listed below, worked from
Round 4: Change to color SAND, MC, and ch 4. (This forms
center outward
1 dc and the ch-1 space).
3. First center color is round 1; Second color is round
Into the next ch-1 space, work: 3 dc, ch-1; then into the
2; Third color is round 3; then use main color Sand for
next ch-3 corner space, work 3 dc, ch 3, 3 dc, ch 1. Rep in
round 4 of ALL squares.
each of the remaining ch-1 and ch-3 spaces; then in the
4. The total number of squares needed are shown in last ch-1 space, work 2 dc. Join with a sl st to the top of
parentheses the starting ch-3. Cut strand and fasten off.
These 4 rounds form one Granny square.
Square 1 (make 6): Sunflower, Bristol Blue, Crabapple,
Sand.
Joining Squares:
Square 2 (make 6): Smoke Blue, Ginger, Bristol Blue, Sand.
Referring to the numbered arrangements in the schematic
Square 3 (make 6): Burgundy, Sunflower, Ginger, Sand. drawings, join the squares together for Back, Fronts,
Square 4 (make 7): Crabapple, Smoke Blue, Sunflower, Sleeves and Hood. Join squares side to side, and top to
Sand. bottom, by ch or sc into the back loops, or by sewing into
Square 5 (make 6): Burgundy, Ginger, Smoke Blue, Sand. the back loops: this way of joining allows the front loops to
form a “frame” around the square.
Square 6 (make 6): Ginger, Crabapple, Burgundy, Sand.
Back: 28 total squares
Square 7 (make 7): Sunflower, Navy, Smoke Blue, Sand.
Each Front (each different): 14 squares each
Square 8 (make 7): Navy, Burgundy, Bristol Blue, Sand.
Each sleeve (both sleeves the same): 12 total squares
Square 9 (make 7): Crabapple, Smoke Blue, Burgundy,
Sand. Hood: 7 total squares.
Square 10 (make 7): Bristol Blue, Navy, Sunflower, Sand.
Square 11 (make 6): Navy, Sunflower, Crabapple, Sand. Make extensions to enlarge and shape pieces:
Square 12 (make 5): Smoke Blue, Bristol Blue, Navy, Sand. After the squares are joined together as shown, work the
extension areas shown on the schematics, outside the
Square 13 (make 6): Bristol Blue, Burgundy, Ginger, Sand.
granny squares sections, ALL in SAND color.
Square 14 (make 5): Ginger, Crabapple, Navy, Sand.
These areas are color-coded on the schematic drawings, to
show the order in which they are worked: with Sand yarn,
work Blue sections first, Yellow sections next, then work
To make a GRANNY SQUARE: Green sections.
Note: A group of 3 double crochet sts is referred to as a The Pink section, bordering Front and Hood, is worked
cluster; with size 7 (4.5mm) hook and first (center) color, last, after body and sleeves are joined.
make a center ring.
Round 1: ch 3. Into the center ring, make 2 dc, ch 3, (3 dc,

All images, text and illustration(s) © Cascade Yarns® 2023 page 2

BACK EXTENSIONS: FRONT:
Right Back, SIDE PANEL PATTERN: After the Left Front and Right Front squares are joined,
as shown in the schematic, work the same side panel
Row 1: With RS facing and Sand, beg at lower right corner extensions as for the Back.
of Back, ch3, * 3dc, in corner, ch 1; then rep from * along
entire edge, working 3dc in each join between squares (so
do not work into corners of squares where squares are Left front neckline, with shaping:
joined), end 3dc in final corner space; turn.
Attach Sand yarn to top right hand corner space.
Row 2 (WS): Ch4, * 3dc in space, ch1; repeat across, end
Row 1: Ch3, 3dc in space – continue in side panel pattern
1dc in corner; turn. Extension measures 1”.
as est, to end.
Tie marker 6.5 (6.5, 6.5, 9, 9, 9)” down from top of piece to
Work one more row in pat. Extension measures 1”.
indicate beg of armhole.
Tie marker 5( 6, 6.5, 7, 7.5, 7.5 )” over from armhole edge:
Row 3 (RS): rep row 1 to marker, and turn.
this section represents shoulder.
Row 4 (WS): rep row 2, and turn.
Row 3: (right side facing) – work in pat as est to marker,
Rep the last 2 rows until lower part of the extension turn. Work 2 more rows in pat as est over this rem
measures 1.5 (2.5, 3.5, 4.5, 5.5, 6.5)”. Cut strand and section. Extension measures 2.5”. Cut strand and fasten
fasten off. off.

Left Back: Starting at upper corner, work same as for Right Right front neckline, with shaping:
Back edge, until piece measures 1” (2 rows). Cut strand
Work Right Front as for Left Front, in reverse: on row 3,
and fasten off. Tie marker 6.5 (6.5, 8, 8, 9, 9)” down from
work to marker and turn. Extension measures 2.5”. Cut
top of piece to indicate beg of armhole, same as for Right
strand and fasten off.
side of Back. Re-attach yarn at marker and work until
extension measures 1.5( 2.5, 3.5, 4.5, 5.5, 6.5)”. Cut strand
and fasten off. SLEEVE extensions:
Right side of sleeve:
Back Lower edge: Starting from lower right corner: Join Sand yarn in
Row 1: With RS facing and Sand, beg at lower corner of corner space. Work 2 (2, 2, 6, 6, 6) rows even in side panel
Back, ch3, * 3dc, in corner, ch 1; then rep from * along pattern.
entire edge, working 3dc in each join between squares (so Row 3: (3, 3, 7, 7, 7) – sl st past the first 2 3dc clusters, in
do not work into corners of squares where squares are next space, ch1, 3sc; ch1, 3hdc in next space; ch1, 3dc in
joined), end 3dc in corner space; turn. next space and all across to end; ch4, turn.
Row 2 (WS): Ch4, * 3dc, ch1; repeat across, end 1dc in Row 4: (4, 4, 8, 8, 8) – 3dc in first space; (ch1, 3dc in next
corner; turn. space) 8x; ch1, 3hdc in next space; ch1, 3sc in next space,
Repeat the last 2 rows until this section measures 2.5”. sl st in next stitch, turn.
Cut strand and fasten off. Row 5: (5, 5, 9, 9, 9) – slip stitch to second ch 1 space, ch1,
3sc in space; ch1, 3hdc, in next space; (ch1, 3dc)8x to end;
ch4, turn.
Back Upper edge extension:
Row 6: (6, 6, 10, 10, 10) – 3dc in first space; (ch1, 3dc in
Row 1: With RS facing, and Sand, beg at upper right
next space) 3x, ch 1, 3hdc in next space; ch1, 3sc in next
corner of Back, ch3, * 3dc, in corner, ch 1; then rep from
space, sl st in next stitch. Cut strand and fasten off.
* along entire edge, working 3dc in each join between
squares (so do not work into corners of squares where
they are joined), end 3dc in corner space; turn. Left side of sleeve:
Row 2 (WS): Ch4, * 3dc, ch1; repeat across, end 1dc in Starting from upper left corner:
corner; turn.
Join Sand yarn in corner space. Work 2 (2, 2, 6, 6, 6) rows
Repeat the last 2 rows until this section measures 2.5”. even in side panel pattern.
Cut strand and fasten off.
Row 3: (3, 3, 7, 7, 7) – Ch3, 3dc in first space; (ch1, 3dc in
Tie marker 5 (6, 6.5, 7, 7.5, 7.5)” over from each armhole next space) 12 x; ch1, 3hdc in next space; ch1, 3 sc in next
edge: these sections represent shoulders; Back neck, in space, sl st in next stitch; turn.
between markers should measure 8 (8, 9, 10, 10, 11)”.
All images, text and illustration(s) © Cascade Yarns® 2023 page 3
Row 4: (4, 4, 8, 8, 8) – Slip Stitch to 4 th space (end of 2 Trim:
nd 3dc cluster) ch1, 3sc in 4 th space; ch1, 3hdc in next with Smoke blue, work contrast trim approx. this way: *
space; ch1, 3dc in next space and all across to end; turn; (sc 3 times into cluster, sc once into ch) 2 times; then sc 2
Row 5: (5, 5, 9, 9, 9) – Ch3, 3dc in first space; (ch1, 3dc in times into cluster, sc once into ch; rep from * along entire
next space) 7x; ch1, 3hdc in next space; ch1, 3 sc in next edge.
space, sl st in next stitch; turn.
Row 6: (6, 6, 10, 10, 10) - Slip Stitch to 4 th space (end of Sleeve trim:
2nd 3dc cluster) ch1, 3sc in 4th space; ch1, 3hdc in next
space; ch1, 3dc in next space and work as est to end. With Smoke Blue, sc around lower sleeves: 2 sc in each
cluster, then 1 sc in each ch1.
Cut strand and fasten off.

Sleeve lower edge:

Work Row 1 as for Back lower edge.
Row 2, decrease row (WS): Ch4; (2 dc in space, ch1) 4(4,
4, 6, 6, 6) times; then 3dc ch1; repeat across to last 4(4, 4,
6, 6, 6) spaces, end 2dc in space, ch1, to corner, end dc in
corner.
Extension measures 1”, or work longer if desired. Cut
strand and fasten off.

HOOD extension:
Row 1: With RS facing, and Sand, beg at corner of hood,
ch3, * 3dc, in corner, ch 1; then rep from * along entire
edge, working 3dc in each join between squares, end 3dc
in corner space; turn.
Row 2 (WS): Ch4, * 3dc, ch1; repeat across, end 1dc in
corner; turn.
Repeat the last 2 rows until this section measures 7 (7,
7, 7, 7.5, 7.5)”. Cut strand and fasten off. Fold hood as
shown on schematic and join back edges.

FINISHING:
Weave in all ends. Steam all pieces lightly.

Join pieces in this order:

1. Fronts to Back at shoulders;
2. Tops of sleeves in armholes, centering at shoulder seam;
3. Sleeve sides, then Front and Back sides—note that
sewing (with right sides facing to maintain outline sts),
rather than crocheting, results in a softer seam at sides;
4. Hood to neckline, easing in any fullness.

Front and Hood Band:

The front band is worked along front and hood edges, all
in one section. With Sand, work in Side panel pattern as
est for 4 rows—band measures 2”.

All images, text and illustration(s) © Cascade Yarns® 2023 page 4

Weave in all remaining ends.

All images, text and illustration(s) © Cascade Yarns® 2023 page 5