-3-
INFORMATION AND INSTRUCTIONS FOR BIDDERS FOR e-TENDERING
FORMING PART OF BID DOCUMENT AND TO BE POSTED ON WEBSITE
The Executive Engineer, President’s Estate, CPWD, Rashtrapati Bhavan, New Delhi-
110004 on behalf of the President of India invites online Percentage rate tenders from approved
and eligible contractors of CPWD for the following work(s): -
S. NIT Name of work Estimated Earnest Period of Last date & Time &
No. No. & Location cost put money Completion time of date of
to submission of opening
Bid Online Bid, of Bid
EMD, e-tender
Processing Fee
and other
Documents as
uploaded on
website
1 2 3 4 5 6 7 8
1
Construction of New
Toilets near Herbal
Garden at
63/EE/PE/24-25
Upto 03:00 P.M
19-09-2024
Rs. 99,686/-
19-09-2024
Rashtrapati
Rs. 49,84,283/-
03:30 P.M
Nilayam, Hyderabad
on
on
during 2024-25. 06 Months
1. The intending bidder must read the terms and conditions of CPWD-6 carefully. He should only
submit his bid if he considers himself eligible and he is in possession of all the documents
required.
2. Information and instructions for bidders posted on website shall form part of bid document.
3. The tender document consisting of plans, specifications, the schedule of quantities of various
types of items to be executed and the set of terms and conditions of the contract to be complied
with and other necessary documents can be seen and downloaded from website CPWD
eTendering (https://etender.cpwd.gov.in), and www.eprocure.gov.in free of cost.
4. But the bid can only be submitted after deposition of original EMD either in the office of Executive
Engineer inviting bids or division office of any Executive Engineer, CPWD within the period of
bid submission and uploading the mandatory scanned documents such Insurance Surety Bonds, Account
Payee Demand Draft or Bankers Cheque or Fixed Deposit Receipts or/ and Bank Guarantee (for balance amount
as prescribed) from any of the Commercial bank towards EMD in Favour of Executive Engineer, President
Estate Division, CPWD, Rashtrapati Bhavan, New Delhi as mentioned in NIT, receipt for deposition
of original EMD to division office of any Executive Engineer (including NIT issuing EE/AE),
CPWD and other documents as specified
Addition… Nil Correction... Nil Deletion ... Nil Overwriting... Nil Sr.D/MAN AE(P) EE
- 49 -
31 STAINLESS STEEL SINKS NILKANTH, NIRALI, COBRA, PRAYAG
32 SOIL, WASTE & VENT PIPES &FITTINGS NECO, RIF
( A) CENTRIFUGAL CAST IRON
33 STONEWARE PIPE & GULLY TRAPS PERFECT, PARRY, ANY ISI MARK
34 SMC STORAGE PANEL TANK ANY MAKE IN INDIA BRAND (ISI MARKED)
35 TILE ADHESIVE CICO, PIDILITE
36 UPVC WINDOW FENESTA, REHAU, POLYWOOD
37 VITRIFIED TILES GRANITO, KAJARIA, JOHNSON (MARBONITE), RAK
38 VITREOUS CHINA SANITARYWARE ( HINDWARE,CERA, KEROVIT
W.C./ WASH BASIN)
39 WHITE CEMENT J.K. WHITE, BIRLA WHITE
40 WATER PROOFING COMPOUND TAPCRETE, CICO, ACCOPROOF, IMPERMO
41 WIRE MESH STERLING ENTERPRISES, TRIMURTY WELDED
MESH
42 WATER-PROOF CEMENT PAINT SNOWCEM, ASIAN,BERGER PAINT.
43 WATER PROOFING MEMBRANE -APP SIKA INDIA, IWL INDIA LTD., PIDILITE, SHALIMAR
(ATACTIC POLYPROPYLENE POLYMER) SEAL AND TAR PRODUCTS (P) LTD., BENGAL
BITUMEN.
44 OIL BOUND WASHABLE DISTEMPER BISON WASHABLE OIL BOUND DISTEMPER OF
BERGER MAKE, PREMIUM WASHABLE OIL
BOUND DISTEMPER OF KANSAI -NEROLAC MAKE,
TRACTOR BRAND WASHABLE DISTEMPER OF
ASIAN PAINTS MAKE, MAXILITE OF ICI- DULUX
PAINTS MAKE.
45 ACRYLIC / PLASTIC EMULSION RANGOLI ACRYLIC EMULSION OF BERGER
MAKE’, BEAUTY GOLD OF KANSAI - NEROLAC
MAKE, APCOLITE ACRYLIC EMULSIONOF ASIAN
PAINTS MAKE, SUPER COVER ICI- DULUX PAINTS
MAKE.
46 ACRYLIC EXTERIOR PAINT SONWCRYL XT OF SNOWCEM PAINT,
WEATHERCOAT SMOOTH OF BERGER PAINTS,
WEATHER SHIELD OF ICI PAINT, APEX OF ASIAN
PAINTS
47 SYNTHETIC ENAMEL PAINT LUXOL SILK EMULSION OF BERGER PAINT
MAKES.ALLSCAPE OF KANSAI- NEROLAC PAINT
LTD. MAKE.APCOLITE OF ASIAN PAINT MAKE.
SUPER ENAMEL OF ICI- DULUX PAINTS MAKE.
48 PLY WOOD ARCHID PLY, DURO BOARD, KITPLY INDUSTRIES
(SWASTIKA) CENTAURY OR EQUIVALENT,
DUROPLY (BWR) CENTURY PLYWOOD, GREEN
PLYWOOD, MYSORE BOARDS.
49 FLUSH DOOR SHUTTERS KUTTY FLUSH DOOR, KITPLY INDUSTRIES
(SWASTIK), SAMRAT LAMINATE PVT. LTD.
(SAMRAT) CNC COMMERCIAL LTD. (SHIVALIK),
SR JINDAL PLY WOOD INDUSTRIES (PRIMA),
ARCHIDPLY, KIT’ PLY, MYSORE BOARDS,
KITLAM, NATIONAL, SWASTIC, CORBEET OR ANY
BIS APPROVED BRAND
50 CI SLUICE VALVES, CHECK VALVES IVC (CALCUTTA) KIRLOSKAR/ UPADYAYA/OR
WITH ISI MARK.
51 TILE ADHESIVE CICO, PIDLITE FERROUS
52 PTMT FITTINGS PRAYAG, SHAKTI
Addition… Nil Correction... Nil Deletion ... Nil Overwriting... Nil Sr.D/MAN AE(P) EE
-99-
Providing and fixing uplasticised PVC connection pipe
63 with brass unions :
63.1 45 cm length
63.1.1 20 mm nominal bore 7.00 Each 115.84 811.00
Providing & fixing (ALD-579) Hand shower (Health
Faucet) with 1 Meter Long Easy Flex Tube in Chrome
64 Finish and Wall Hook with N.R.V. (Back Flow 7.00 Each 1389.77 9728.00
Preventer) of make jaguar or equivalent as per
direction of Engineer-in-charge
Providing and fixing of SMC Panel Tank (ISI Marked-
14399) Part-I CMC number batch number Panel class
type as per BIS (ISI) of the under mentioned size
(2.0m x 2.0m x 1.0m) GS-PT-NP-0003.00 KL and the
capacity (4 kl) made out of HOT PRESS MOULDED
SHEET MOULDING COMPOUND (SMC) Panel of size
Bottom Panel SMC-1005mmX1005mm ( ! 16.5 Kg) ,
side Panel 1005X1005, 2010X1005 (W ! 13.0 Kg,
Roof Panel 1005X1005 (Wt.! 13.0 Kg), Manhole
assembly size SMC 1005X1005 and corner L Angle
Assembly 1005X75 with All necessary required for
65 Installation. The flange should be perpendicular to
the main surface. The shape should be Trunked Type
for extra strength and 90 degree flanges
predrilled for bolting. All the Flanges of the Panel
should have 13 Nos. holes for fastening/joining the
panels to one another. Hot Pressed Moulded SMC Pre
Drilled Corner Pieces with built-in ribs of the size
75mm X 75 mm should be provided for 90 degree
joints of tank walls or wall to base or wall to roof
joints complete with galvanized iron nuts, bolts and
washers. Special sealant having excellent UV
Resistance as well as suitable for potable water,
Addition… Nil Correction... Nil Deletion ... Nil Overwriting... Nil Sr.D/MAN AE(P) EE
-100-
complete with Top Covered construction having
Man-Hole with Cover of dia 600mm specification of
Panel Tank have excellent thermal & hygienic
properties, zero light penetration, stable thermal
transition and made of hygienic quality IIs I logo &
CMC number must be printed on all Panels in
confirming to ISI standards. SMC Panel Tanks meets
all specified test as per ISI standard as per eg; Hydro
static pressure test, detection test, Impact test, & our
quotation equipped with all testing machine & report
can be submitted as required. Test will be done by
contractor on his part. Accessories with tanks sealant,
Air vent, water level indicator with PVC material,
Fasteners use for the Panel joints-nut bolt 2 washers
(3/8''-1.5-inch-long) with hot dip galvanization
(SS304) olive green bolt. Roof support pipe the tank Per
4000.00 59.18 236720.00
will have PVC roof support pipes every internal top Ltr
joints to avoid sagging of the roof Panels. Nozzles are
not dip galvanized. Nozzles/pipe Nipples for making
the inlet, outlet, drain, overflow & Vent as required by
the client. The internal dimension of the tank should
not be less than 1m X 1m X2m and the minimum
capacity of the tank should be 4000 Ltr. Complete as
specified the direction of the Engineer. Contractor
shall prepare shop drawings and submit design
calculation of the supporting arrangement and its
fixing which shall be vetted by approved agency of
the engineer in charge before execution on own cost.
(Each Panel of SMC Tank mark with ISI stamping CMC
Number, Batch Number, Panel Class Type as per BIS
(GIF), Embossed brand logo as per direction of
Engineer-in-charge.
Providing & fixing (KUP-35053PM) Angular stop cock
66 with wall flange of make jaguar or equivalent as per 20.00 Each 1698.30 33966.00
direction of Engineer-in-charge
67 Providing and fixing square-mouth S.W. gully trap
class SP-1
complete with C.I. grating brick masonry chamber
with water tight C.I. cover with frame of 300 x300
mm size (inside) the weight of cover to be not less
than 4.50 kg and frame to be not less than 2.70 kg as
per standard design:
67.1 100x100 mm size P type
67.1.1 th common burnt clay F.P.S. (non modular)bricks of
class designation 7.5 8.00 Each 2634.54 21076.00
68 Providing and laying non-pressure NP2 class (light
duty) R.C.C. pipes with collars jointed with stiff
mixture of cement mortar in the proportion of 1:2 (1
cement : 2 fine sand) including testing of joints etc.
complete :
68.1 250 mm dia. R.C.C. pipe 20.00 mtr 875.51 17510.00
Addition… Nil Correction... Nil Deletion ... Nil Overwriting... Nil Sr.D/MAN AE(P) EE
