1

EE/EC/IN Batch : Hinglish

Subject : Digital Electronics DPP - 02

Chapter : ADC and DAC

[NAT]
1. In a 4-bit SAR type ADC, conversion time for input
analog voltage VAN = 2.2 Volt is 15 nsec. Clock
frequency used is _____MHz.

[MCQ]
2. In a 4-bit counter type ADC, applied input analog
voltage is VAN = 2.35 volt. If resolution of DAC used
in designing of counter type ADC is 0.4 Volt, then
digital output corresponding to applied analog input
is
(a) (0110)2 (b) (1100)2
(c) (0101)2 (d) (1010)2
VAN is input analog voltage and Vr is reference
voltage used for logic ‘1’. Output of comparators (1)
[MCQ] & (2) is as mentioned in the figure, then output y1 y0
will be
3. In a counter type ADC if we double the input analog
voltage then (a) (11)2
(a) Conversion time will be double for sure. (b) (10)2
(b) Conversion time will be half for sure. (c) (01)2
(c) Conversion time will increase and may be (d) Can’t be determine as x2 is unknown.
double or may not be double.
(d) None of these [MCQ]
6. In 3-bit SAR type ADC, corresponding to any input
analog voltage which digital output sequence is not
[NAT]
possible?
4. In a 5-bit flash type ADC, number of comparators
used are _______ . (a) 100 → 110 → 101 → 100
[MCQ] (b) 100 → 110 → 111 → 110
5. A flash type ADC is as given below:
(c) 100 → 110 → 111 → 101

(d) 100 → 110 → 101 → 101

 2

[NAT] [MCQ]
9. If we arrange the ADCs according to their speed of
7. We have two analog to digital converter circuits: operation then which of the following is true?
(a) Counter type > SAR type > Dual slope type
Circuit-A → Counter type ADC with resolution
> Flash type
0.5 V
(b) Flash type > Counter type > SAR type > Dual
Circuit-B → SAR type ADC with resolution 0.5 V slope type
(c) Dual slope type > Counter type > SAR type
Both are 4-bit ADCs and are operating with same > Flash type
clock.
(d) Flash type > SAR type > Counter type
For input analog voltage VAN = 4.4 Volt, > Dual slope type
Conversion time for Circuit-A is T1 and conversion
time for Circuit-B is T2 the then value of
[MCQ]
T1
__________ . 10. If input analog voltage change, then which of the
T2
following is not true?
(a) Conversion time charges in counter type ADC
[NAT] in general.
(b) Conversion time charges in dual slope type
ADC in general.
8. A digital circuit is designed as shown:
(c) Conversion time charges in SAR type ADC in
general.
(d) Conversion time remains unchanged in SAR
type ADC.

When counter will be at Q2 Q1 Q0 = (101)2, then

digital output will be ____(10)10 ___.
 3

Answer Key
1. (26.67) 6. (c)
2. (a) 7. (2.25)
3. (c) 8. (10)
4. (31) 9. (d)
5. (c) 10. (c)

Any issue with DPP, please report by clicking here:- https://forms.gle/t2SzQVvQcs638c4r5

For more questions, kindly visit the library section: Link for web: https://smart.link/sdfez8ejd80if

PW Mobile APP: https://smart.link/7wwosivoicgd4