Saf-T-Gard MH7035L Series Hydraulic Actuators
For use with 113/16-, 2-, 3-, and 4-in nominal gate valves
DESIGN FEATURES The MH7035L hydraulic actuator was developed
Fail safe design. If hydraulic pressure is for 2-, 3-, and 4-in valves. The MH7035L actuator
lost, the actuator will close the valve with can operate any gate valve that will require
available spring force without the assistance 35,000 lbf or less to open the valve. By focusing
of well bore pressure. on smaller valve sizes, the actuator can be
more compact and can fit into areas with space
Superior piston design. The top shaft and restraints. These types of designs provide the
piston are incorporated into a single unit. customer with a quality design at minimal cost.
T-seals with peek back up seals are utilized.
A 3-in piston keeps swept volumes low for Optional devices and accessories
quicker displacement and faster closing times. Cameron has a complete line of accessories
available to adapt to existing actuators in the
Nonpressurized actuator housing. The piston
field or installed on new manufactured actuators.
assembly is captured in a hydraulic power
Standard items include hydraulic overrides,
head contained fluid assembly. This allows
manual overrides, fusible lock open devices,
the hydraulic head to capture the pressure
electric proximity switches, solenoid valves for
between the piston seal and the top of the
SCADA tie-ins, quick exhausts, and manual
head assembly, keeping the spring housing
reset relays.
from being pressurized. Because the housing
is not pressurized, proximity switches can Ease of maintenance
be mounted on the side of the housing for Including the bonnet assembly, the MH7035L
electric position indication, versus mounting actuator consists of 23 components. The
them to the top shaft assembly. actuator without bonnet consists of 16 parts.
Minimal downtime is required when replacing
Corrosion-resistant materials. The Cameron
the piston seal, as the piston installed at the
MH7035L actuators are coated externally
top of the actuator in a power head assembly
and internally with Ever-Slik® 1201 corrosion-
separates from the spring housing. Removing
resistant coating, which provides excellent
the power head and changing the seal can be
chemical and abrasion resistance with good
performed in minutes.
thermal stability. The spring package is
coated with a SermaGard® coating.
Cameron seal technology. Cameron
incorporates its decades of seal design
knowledge and experience into its
Saf-T-Gard* actuator.
Fixed drift adjustment. Stainless-steel
spacers are used during the initial installation
of the actuator to adjust the drift. Subsequent
removal and replacement of the actuator
does not affect the drift setting.
Optional accessories and devices.
Saf-T-Gard MH7035L Series Hydraulic Actuators
Rising stem and nonrising stem visual Maintenance Interval
indication. A rising stem version is available Cycle open and close Once a month
that provides visual indication when the Replace actuator seals Every 5 years or when leakage occurs
valve is open or closed. A nonrising stem Inspect head, housing and piston When seals are replaced
version is available which provides visual Replace safety relief device (if applicable) As required
indication via indicator windows mounted on Clean debris from vent or breather holes As required
the actuator housing. This version shortens Technical data for MH7035L LT series actuators
the actuator and removes a seal from the Model MH7035L
power head. Actuator piston size, in [mm] 3 [76.2]
Rapid closure. The exhaust port is designed Specific application sizing, in [mm] 113/16 to 41/8 [46 to 105]
with a standard ½-in NPT thread, reducing API classification API 6A (6FA and 6FC are available)
closure time. Actuator trim Standard AA
Retained fluid actuators Upon request not standard
Actuator bonnet trim EE, FF, and HH (covers complete range)
PSL PSL 1, 2, 3, and 4†
PR-1 and PR-2 Appendix F 2.5
Actuator maximum operating pressure, psi [MPa] 6,000 [41.4]
Actuator test pressure, psi [MPa] 9,000 [62.1]
Spring preload at full closed position, lbf [N] 1,200 [5,338]
Actuator operating temperature, degF [degC] −20 to 250 [−29 to 138]
Actuator inlet port, in 1/2 NPT
Bonnet backseat test port Standard
Packing indicator port Standard
Rising stem design. Nonrising stem design.
Saf-T-Gard MH7035L Series Hydraulic Actuators
1 Actuator Kit
Protector
cap Item Description Material
2
3 1 Piston Stainless steel
4 2 Wiper Elastomer and metal
5, 6
3 Seal Elastomer
4 Head Carbon steel with protective coating
7 5 Port protector Plastic
8
10 9 6 Plug Carbon steel with protective coating
7 Set screw Stainless steel
11 12 8 Seal Elastomer
13 14 9 Downstop Carbon steel with protective coating
15
10 Spring retainer Carbon steel with protective coating
17 16 11 Spring Low alloy steel with protective coating
12 Bolt Carbon steel with protective coating
18
19 13 Housing Carbon steel with protective coating
14 Vent fitting Brass
20 Bonnet Kit
21 15 Stem Material class dependent
16 Washer Stainless steel
17 Packing retainer Aluminum bronze
18 Back up ring Polyaryletherketone (virgin)
Standard: SLS* spring-loaded lip seal
19 Packing seal
Optional: VariPak®
20 Bonnet Material class dependent
21 Grease fitting Material class dependent
MH7035L Series hydraulic actuator with rising stem.
MH7035LNRS Operating Pressure Calculation Formulas Rising Stem Actuator
Valve Valve Crack Open Crack Open Supply Hold Open Hold Open Supply Swept
Size, in Model Supply Pressure Pressure Requirement, Supply Pressure Pressure Requirement, Volume, in3
Requirement, psi at Full Differential Pressure, Requirement, psi at Full Differential Pressure,
psi [MPa] psi [MPa]
10M FLS .333 × WP + 272 3,602 [24.8] .214 × WP + 418 2,558 [17.6] 14.41
113/16
15M FLS .334 × WP + 272 5,282 [36.4] .214 × WP + 418 3,628 [25.0] 14.41
3M FL/FLS .338 × WP + 272 1,286 [8.9] .214 × WP + 419 1,061 [7.3] 14.41
3M 'M' .335 × WP + 272 1,277 [8.8] .214 × WP + 428 1,070 [8.8] 15.13
5M FL/FLS .340 × WP + 272 1,972 [13.6] .214 × WP + 419 1,489 [10.3] 14.41
21/16
5M 'M' .337 × WP + 272 1,957 [13.5] .214 × WP + 428 1,498 [10.3] 15.13
10M FLS .341 × WP + 272 3,682 [25.4] .214 × WP + 419 2,559 [17.6] 14.41
15M FLS .369 × WP + 272 5,812 [40.1] .214 × WP + 419 3,628 [25.0] 14.41
3M FL/FLS .449 × WP + 277 1,624 [11.2] .258 × WP + 466 1,240 [8.6] 17.69
3M 'M' .434 × WP + 277 1,579 [10.9] .258 × WP + 470 1,244 [8.6] 18.05
29/16 5M FL/FLS .452 × WP + 277 2,537 [17.5] .258 × WP + 466 1,756 [12.1] 17.69
5M 'M' .436 × WP + 277 2,457 [16.9] .258 × WP + 470 1,760 [12.1] 18.05
10M FLS .453 × WP + 277 4,807 [33.2] .258 × WP + 466 3,046 [21.0] 17.69
3M FL .566 × WP + 282 1,980 [13.7] .307 × WP + 515 1,436 [9.9] 21.16
3M 'M' .555 × WP + 282 1,947 [13.4] .307 × WP + 522 1,443 [10.0] 21.70
31/8 5M FL .569 × WP + 282 3,127 [21.6] .307 × WP + 515 2,050 [14.1] 21.16
5M FLS .571 × WP + 282 3,137 [21.6] .307 × WP + 515 2,050 [14.1] 21.16
5M 'M' .559 × WP + 282 3,077 [21.2] .307 × WP + 522 2,057 [14.2] 21.70
3M FL .901 × WP + 370 3,073 [21.2] .478 × WP + 850 2,284 [15.8] 21.17
3M FLS .903 × WP + 370 3,079 [21.2] .478 × WP + 850 2,284 [15.8] 21.17
3M 'M' .901 × WP + 370 3,073 [21.2] .478 × WP + 853 2,287 [15.8] 21.35
41/8
5M FL .905 × WP + 370 4,895 [33.8] .478 × WP + 850 3,240 [22.3] 21.17
5M FLS .908 × WP + 370 4,910 [33.9] .478 × WP + 850 3,240 [22.4] 21.17
5M 'M' .905 × WP + 370 4,895 [33.8] .478× WP + 853 2,287 [15.8] 21.35
Saf-T-Gard MH7035L Series Hydraulic Actuators
Specification
Rising stem
B
J
F
G
H K
D
C
E
Rising stem design dimensions. Complete actuator removal. Partial disassembly removal. Partial disassembly removal.
Dimensions
Bonnet Housing Valve Open Valve Closed Complete Actuator Removal Partial Disassembly Removal
Valve Valve
Diameter Diameter Height Height Height Height Height Height Height Height
Size, in Model
(A), in (B), in (C), in (D), in (E), in (F), in (G), in (H), in (J), in (K), in
113/16 10M FLS 8.94 6.62 28.64 31.11 18.66 40.52 1.91 33.33 14.55 33.21
15M FLS 9.50 6.62 28.64 31.11 18.66 40.52 1.91 33.33 14.55 33.21
21/16 3/5M FL/FLS 6.88 6.62 27.92 30.39 17.94 39.80 1.91 32.61 14.55 32.49
3/5M 'M' 7.13 6.62 28.01 30.61 18.16 40.02 1.91 32.84 14.55 32.71
10M FLS 9.00 6.62 28.64 31.11 18.66 40.52 1.91 33.33 14.55 33.21
15M FLS 9.50 6.62 28.64 31.11 18.66 40.52 1.91 33.33 14.55 33.21
29/16 3/5M FL/FLS 7.88 6.62 26.92 29.95 17.50 39.36 1.91 32.18 14.55 32.05
3/5M 'M' 7.75 6.62 26.80 29.89 17.44 39.30 1.91 32.12 14.55 31.99
10M FLS 9.38 6.62 28.77 31.80 19.35 41.21 1.91 34.03 14.55 33.90
31/8 3M FL 8.38 6.62 29.79 33.41 20.50 42.36 1.91 35.64 14.55 35.05
5M FL 9.12 6.62 29.79 33.41 20.50 42.36 1.91 35.64 14.55 35.05
5M FLS 9.12 6.62 27.54 31.16 18.25 40.11 1.91 33.39 14.55 32.80
3/5M 'M' 9.13 6.62 27.03 30.74 17.83 39.69 1.91 32.97 14.55 32.38
41/8 3M FL 10.38 8.62 33.00 37.99 23.22 53.51 2.88 40.87 17.97 41.19
3M FLS 10.38 8.62 31.59 36.58 21.81 52.10 2.88 39.86 17.97 39.78
3M 'M' 12.13 8.62 31.19 36.18 21.41 51.70 2.88 39.46 17.97 39.38
5M FL 10.69 8.62 31.59 36.58 21.81 52.10 2.88 39.46 17.97 39.78
5M FLS 10.81 8.62 31.59 36.58 21.81 52.10 2.88 39.46 17.97 39.78
Saf-T-Gard MH7035L Series Hydraulic Actuators
MH7035L Nonrising Stem Technical Data
Actuator Kit
3, 4
2 Item Description Material
1
1 Piston Stainless steel
5 2 Head Carbon steel with protective coating
6
8 3 Port protector Plastic
9
7 4 Plug Carbon steel with protective coating
11
5 Set screw Stainless steel
10 6 Seal Elastomer
14 12 7 Downstop Carbon steel with protective coating
15 13 8 Spring retainer Carbon steel with protective coating
16 9 Indicator window Clear acrylic
17 10 Spring Low-alloy steel with protective coating
11 Bolt Carbon steel with protective coating
19 12 Housing Carbon steel with protective coating
20 13 Vent fitting Brass
Bonnet Kit
14 Stem Material class dependent
15 Washer Stainless steel
16 Packing seal Aluminum bronze
17 Back up ring Polyaryletherketone (virgin)
Standard: SLS seal
18 Packing seal
Optional: VariPak
19 Bonnet Material class dependent
MH7035L Series hydraulic actuator 20 Grease fitting Material class dependent
with nonrising stem.
MH7035LNRS Operating Pressure Calculation Formulas Nonrising Stem Actuator
Valve Valve Crack Open Crack Open Supply Hold Open Hold Open Supply Swept
Size, in Model Supply Pressure Pressure Requirement, Supply Pressure Pressure Requirement, Volume, in3
Requirement, psi at Full Differential Pressure, Requirement, psi at Full Differential Pressure,
psi [MPa] psi [MPa]
10M FLS .276 × WP + 220 2,980 [20.6] .177 × WP + 341 2,111 [14.6] 17.43
113/16
15M FLS .276 × WP + 220 4,360 [30.1] .177 × WP + 341 2,996 [20.7] 17.43
3M FL/FLS .279 × WP + 220 1,057 [7.3] .177 × WP + 341 872 [6.0] 17.43
3M 'M' .277 × WP + 220 1,051 [7.2] .177 × WP + 349 880 [6.1] 18.30
5M FL/FLS .281 × WP + 220 1,625 [11.2] .177 × WP + 341 1,226 [8.5] 17.43
21/16
5M 'M' .279 × WP + 220 1,615 [11.1] .177 × WP + 349 1,234 [8.5] 18.30
10M FLS .282 × WP + 220 3,040 [21.0] .177 × WP + 341 2,111 [14.6] 17.43
15M FLS .305 × WP + 220 4,795 [33.1] .177 × WP + 341 2,996 [20.7] 17.43
3M FL/FLS .371 × WP + 224 1,337 [9.2] .213 × WP + 380 1,019 [7.0] 21.40
3M 'M' .359 × WP + 224 1,301 [9.0] .213 × WP + 384 1,023 [7.1] 21.83
29/16 5M FL/FLS .373 × WP + 224 2,089 [14.4] .213 × WP + 380 1,445 [10.0] 21.40
5M 'M' .361 × WP + 224 2,029 [14.0] .213 × WP + 384 1,449 [10.0] 21.83
10M FLS .375 × WP + 224 3,974 [27.4] .213 × WP + 380 2,510 [17.3] 21.40
3M FL .468 × WP + 229 1,633 [11.3] .254 × WP + 421 1,183 [8.2] 25.59
3M 'M' .459 × WP + 229 1,606 [11.1] .254 × WP + 427 1,189 [8.2] 26.25
31/8 5M FL .470 × WP + 229 2,579 [17.8] .254 × WP + 421 1,691 [14.1] 25.59
5M FLS .472 × WP + 229 2,589 [17.9] .254 × WP + 421 1,691 [11.7] 25.59
5M 'M' .462 × WP + 229 2,539 [17.5] .254 × WP + 427 1,697 [11.7] 26.25
3M FL .745 × WP + 301 2,536 [17.5] .395 × WP + 698 1,883 [13.0] 32.87
3M FLS .747 × WP + 301 2,542 [17.5] .395 × WP + 698 1,883 [13.0] 32.87
3M 'M' .745 × WP + 301 2,536 [17.5] .395 × WP + 701 1,888 [13.0] 33.09
41/8
5M FL .748 × WP + 301 4,895 [27.9] .395 × WP + 698 2,673 [18.4] 32.87
5M FLS .751 × WP + 301 4,056 [28.0] .395 × WP + 698 2,673 [18.4] 32.87
5M 'M' .748 × WP + 301 4,895 [27.9] .395 × WP + 701 2,676 [18.5] 33.09
Saf-T-Gard MH7035L Series Hydraulic Actuators
Specification
Nonrising stem
B
H
E
J
G F
C
A D
Nonrising stem design dimensions. Complete actuator removal. Partial disassembly removal. Partial disassembly removal
Dimensions
Valve Valve Bonnet Housing Valve Open or Closed Complete Actuator Removal Partial Disassembly Removal
Size, in Model Diameter Diameter Height (C), in Height (D), in Height (E), in Height Height Height Height
(A), in (B), in (F), in (G), in (H), in (J), in
113/16 10M FLS 8.94 6.62 22.91 18.66 38.12 1.91 24.82 14.55 33.21
15M FLS 9.50 6.62 22.91 18.66 38.12 1.91 24.82 14.55 33.21
21/16 3M/5M FL/FLS 6.88 6.62 22.19 17.94 37.40 1.91 24.10 14.55 32.49
3M/5M 'M' 7.13 6.62 22.28 18.16 37.62 1.91 24.19 14.55 32.71
10M FLS 9.00 6.62 22.91 18.66 38.12 1.91 24.82 14.55 33.21
15M FLS 9.50 6.62 22.91 18.66 38.12 1.91 24.82 14.55 33.21
29/16 3M/5M FL/FLS 7.88 6.62 21.19 17.50 36.96 1.91 23.10 14.55 32.05
3M/5M 'M' 7.75 6.62 21.07 17.44 36.90 1.91 22.98 14.55 31.99
10M FLS 9.38 6.62 23.04 19.35 38.81 1.91 24.95 14.55 33.90
31/8 3M FL 8.38 6.62 23.42 20.50 39.96 1.91 25.33 14.55 35.05
5M FL 9.12 6.62 23.42 20.50 39.96 1.91 25.33 14.55 35.05
5M FLS 9.12 6.62 21.17 18.25 37.71 1.91 23.08 14.55 32.80
3M/5M 'M' 9.13 6.62 20.66 17.83 37.29 1.91 22.57 14.55 32.38
41/8 3M FL 10.38 8.62 30.60 23.22 46.12 2.88 33.48 17.97 41.19
3M FLS 10.38 8.62 29.19 21.81 44.71 2.88 32.07 17.97 39.78
3M 'M' 12.13 8.62 28.79 21.41 44.31 2.88 31.67 17.97 39.38
5M FL 10.69 8.62 29.19 21.81 44.71 2.88 32.07 17.97 39.78
5M FLS 10.81 8.62 29.19 21.81 44.71 2.88 32.07 17.97 39.78
5M 'M' 12.13 8.62 28.79 21.41 44.31 2.88 31.67 17.97 39.38
cameron.slb.com/Saf-T-Gard
* Mark of Schlumberger
Other company, product, and service names
are the properties of their respective owners.
Copyright © 2016 Schlumberger. All rights reserved. 16-SUR-192916
