HD270 Mixer Short Wheelbase
HYUNDAI HD Series
Model HD270
Vehicle Type Mixer
Cab Type Sleeper Cab
Wheel Base Short
Drive System LHD, 6 x 4
Application Engines D6CA38
Dimensions (mm)
Wheel Base 4,590
Length 8,310
Overall (Mixer) Width 2,495
Height 3,660
Wheel Tread Front / Rear 2,040 / 1,850
Overhang (Mixer) Front/ Rear 1,495 / 2,240
Overhang (Chassis Cab) Front / Rear 1,495 / 1,320
Length 4178.5
Drum Diameter ø2,100
Agitating Capacity 7m3
Drum Offset 470
C.A (Cab to rear Axle) 3,755
C.E (Cab to end of frame) 5,075
Min. Ground Clearance 285
Min. Turning Radius m 7.5
Weight (kg)
Mixer Weight 11,640
Front 4,445
Rear 7,195
** Max Gross Vehicle Weight 32,200
Front 7,000
Rear 25,200
** Max. GVW includes the front & rear axle loads based on the permissible tire load.
93 _Hyundai Commercial Vehicle SPECIFICATIONS
HD370S Mixer Short Wheelbase
HYUNDAI HD Series
Model HD370S
Vehicle Type Mixer
Cab Type Sleeper Cab
Wheel Base Short
Drive System LHD, 6 x 4
Application Engines D6CA38
Dimensions (mm)
Wheel Base 5,650
Length 8,115
Overall Width 2,585
Height 3,265
Front 2,070
Wheel Tread
Rear 1,905
Front 1,420
Overhang (Chassis Cab)
Rear (Frame) 2,440
C.A (Cab to rear Axle) 4,815
C.E (Cab to end of frame) 7,255
Min. Ground Clearance 325
Min. Turning Radius m 9.6
Weight (kg)
Chassis Cab Weight 9,630
Front 4,480
Rear 5,150
** Max Gross Vehicle Weight 38,000
Front 8,000
Rear 30,000
** Max. GVW includes the front &「ear axle loads based on the permissible tire load.
Hyundai Commercial Vehicle SPECIFICATIONS_ 94
HYUNDAI HD Series_HD270/370S Mixer
Chassis Specifications
Engine
Model HD270 HD370S
Engine D6CA38
Turbo Charger Intercooler
Type
4 stroke-cycle, water-cooled, direct-injection diesel engine
Number of Cylinder 6 in-line
Piston Displacement (cc) 12,920
Bore x Stmke (mm) 133 x 155
Compression Ratio 17 ： 1
Euroll 380 / 1,900
Max. Power** (ps/rpm) Euro III -
Euro IV -
Euroll 148 / 1,500
Max. Torque ** (kg.m/rpm) Euro III -
Euro IV -
General Pressure type with thermostat, Forced circulation by centrifugal water pump
Cooling System
Radiator Corrugated fin type with pressure cap and condenser tank
Battery 12V x 2, 150 AH at 20 Hr rates
Electrical System Alternator 24V-80A
Starter 24V-6.0kW
Injection pump Delphi EUI system
Fuel System Governor Electronic Control
Fuel filter Spin-on type
Lubrication Forced lubrication by gear pump
Oil filter Full flow and bypass type with paper element
Oil System
Oil cooler Water cooled, plate fin type
Oil grade API service classification CF-4 or above
Valve System Single Overhead Valve, Two valves per cylinder
** Max. Power and Torque of engine may vary according to each country.
Clutch
HD270 HD370S
Engine D6CA38
Type Hydraulic control with Air pressure assistance, Diaphragm spring, Single dry plate, Pre-Damper
Facing Material Non-Asbestos
Facing Size (mm) Outside dia x
ø430 x ø242
Inside dia
95 _Hyundai Commercial Vehicle SPECIFICATIONS
HYUNDAI HD Series_HD270/370S Mixer
Transmission
Model HD270 HD370S
Application Engines D6CA38
T/M Application M12S26 • •
• ： STD H160S 2X5 o
o ： OPT ZF16S151 o
Model M12S6 (Over Drive) H160S 2x5 ZF16S151
6 forward and 1 reverse speed,2nd to 6th 10 forward and 2 reverse speed, 2nd to 16 forward and 2 reverse speed, 1nd to
Type synchromesh, 1st & reverse constant-mesh 10th synchromesh, 1st & reverse constant- 16th synchromesh, reverse constant-
gears mesh gears mesh gears
1st (High / Low) 7.213 9.153 / 7.145 13.8 / 11.54
2nd (High / Low) 4.178 4.783 / 3.733 9.49 / 7.93
3rd (High / Low) 2.587 2.765 / 2.158 6.35 / 5.46
4th (High / Low) 1.621 1.666 / 1.301 4.57 / 3.82
Gear Ratio 5th (High / Low) 1.000 1.000 / 0.780 3.02 / 2.53
6th (High / Low) 0.702 2.08 / 1.74
7th (High / Low) - 1.43 / 1.20
8th (High / Low) - 1.000 / 0.84
Reverse 7.081 8,105 / 6,327 12.92 / 10.80
API service classification GL-4 or SAE service classification 80W (90 ； Tropical zones
Gear Oil
only)
T.G.S. (Transmission Gear Shift) Floor shift, Mechanical remote control
Rear Axle
Type Full floating type
Capacity kg 11,800 x 2 15,000 x 2
Type Single Reduction, Hypoid gear HUB Reduction, Hypoid gear
Final Reduction Gear
G/Ratio 5.571 6.676
Front Axle
Type Reverse Elliot type “ I ’’ beam
Capacity kg 7,000 8,000
Tire & Wheel
Type Single Front, Dual Rear
Tire Front / Rear 12R 22.5 - 16PR 12.00R24-20PR
Wheel Front / Rear 8.25T x 22.5-165 8.5V x 24-158 / 8.5V x 24-180
Steering
Type 2-Spoke, Ball-nut type, Tilt & Telescopic steering column
Tilting Angle 9°
Inner 49 °
Turning Angle
Outer 35 °
Hyundai Commercial Vehicle SPEGFICATIONS_ 96
HYUNDAI HD Series_HD270/370S Mixer
Service Brake
Model HD270 HD370S
Engine D6CA38
Actuation Full Air, Dual circuit fixed S cam with spring loaded chambers
Front Drum dia. x Lining width x Lining thickness ：ø410 x 156 x 19
Size (mm)
Rear Drum dia. x Lining width x lIning thickness ：ø410 x 220 x 19
Compressed air reservoir 120ℓ
Total lining area 9,639㎠
Parking Brake
Actuation Spring loaded type chamber on the rear wheel
Size (mm) Drum diameter x Lining width x Lining thickness ：ø410 x 220 x 19
Total lining area 7,166㎠
Exhaust Brake
Type Air operated, butterfly valve type
Jake brake (Optional)
Type Injection Cam operated type
Suspension
Front Semi-elliptic, laminated leaf springs Multi-Leaf
Type
Rear Semi-elliptic, laminated leaf springs with shackle link (Multi leaf spring)
Shock absorber Hydraulic double acting telescopic type on the front axle
Exhaust system
General Conventional (horizontal) type muffler
Tail pipe Droptail type, blowing to chassis rearward
Fuel tank
Capacity 200 liter 300, 380 liter (OPT)
Material Steel (STD), Aluminum (OPT)
Frame
“H” type frame with channel sectional side rail & cross members, side rail is reinforced with
Type
outer stiffeners
Main side rail (mm) Depth x Flange x Thickness：302 x 90 x 8t
Outer Stiffener (mm) Depth x Flange x Thickness : 316 x 97 x 7t
97 _Hyundai Commercial Vehicle SPECIFICATIONS
HYUnDAI HD Series_HD270/370S Mixer
Annotations
1) Empty vehicle weight and curb weight shown are to 3.5% variation to allow for production tolerance.
2) Empty vehicle weight and curb weight include weight of oil, fuel, coolant and spare tire carrier & bracket, spare tire but exclude standard tool set
3) The vehicle specifications may differ per country.
4) For further information please contact the commercial vehicle export teams of HMC.
5) In order that product improvement may be introduced at any time, specifications are subject to change without prior notice.
Hyundai Commercial Vehicle SPEGFICATIONS_ 98
