Scribd
Upload
35 views2 pages

JSS1 Basic Technology

This document is an examination paper for Basic Technology for JSS1 students at Datikan College, covering both objective and theoretical questions. Section A consists of multiple-choice questions related to technology, safety, materials, and workshop practices, while Section B requires students to answer three theoretical questions on topics such as technology definitions, accidents, and workshop safety. The exam is scheduled for the 2024/2025 session and has a time limit of 1 hour and 30 minutes.

Uploaded by

krystal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
35 views2 pages

JSS1 Basic Technology

This document is an examination paper for Basic Technology for JSS1 students at Datikan College, covering both objective and theoretical questions. Section A consists of multiple-choice questions related to technology, safety, materials, and workshop practices, while Section B requires students to answer three theoretical questions on topics such as technology definitions, accidents, and workshop safety. The exam is scheduled for the 2024/2025 session and has a time limit of 1 hour and 30 minutes.

Uploaded by

krystal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

DATIKAN COLLEGE

AFAHA ATAI IBESIKPO, IBESIKPO/ASUTAN L.GA


FIRST TERMINAL EXAMINATION 2024/2025 SESSION
SUBJECT: BASIC TECHNOLOGY TIME: I HOUR 30 MINUTES
CLASS: JSS1
INSTRUCTION: Answer all questions in section A and any three in Section B
SECTION A (OBJECTIVES)
1. _______ is the processes and products that make life easy and stress free a. machine b. Tool c. Equipment d. Technology
2. Technology is derived from the Greek Words tekne, which refers to a/an a. Art or Craft b. Test c. Training d. Trash
3. The following are products of technology except a. Stone b. Microwave c. Aircraft d. Computer
4. The following are modern technology except a. Cars b. Mobile Phone c. Tractor d. Hoes
5. The following are the importance of technology except _______ a. It encourages creativity in students b. It provides
students with a solid foundation for future training in pre-vocational subjects b. It prepares students with basic
technological literacy d. It encourages waste of resources
6. _______ is the place where activities such as fabrication, designing, construction and drawing takes place a. Factory b.
Hospital c. Hostel d. Workshop
7. _______ means protection from, or not being exposed to, the risk of harm or injury a. Methodology b. Skill c. Safety d.
Technology
8. _______ is a negative experience that happens to somebody when he does not expect it a. An accident b. Disease c. Fiee
outbreak d. Electrical sparking
9. The following are causes of accidents except a. Using appropriate safety devices b. Lack of concentration c. Horseplay d.
Lack of carefulness in handling machines
10. _______ are to be used to stop fire from destroying lives a. Extinguishers and buckets of sands c. Boots d. Goggles
11. _______ is hard fibrous substance that chiefly composes trees and bushes and is found beneath their bark a. Tree b.
Plastics c. Metal d. Wood
12. The materials used in technology include the following except a. Wood b. Metals c. Ceramics d. Cassava
13. The major parts of a tree are as follows except a. Roots b. Trunks and leaves c. Flowers and seeds d. Furniture
14. _______ are trees that shed their leaves in the dry season to prevent water loss e.g.\ Iroko, Afara, Mahogany, Opepe, Omo
a. Hard wood trees b. Soft wood trees c. Di-cotyledons tress d. Coniferous tress
15. Examples of soft wood trees include the following except a. Spruce and vine b. Cedar c. Cypress d. Afara
16. What is the common cause of chemical fire in the workshop? a. Faulty wiring b. Gas, oil or grease c. Overloading a
circuit d. Poor machine maintenance
17. Which of these items is essential for safety in the workshop? a. Mobile phone b. Hand gloves c. Calculator d. Headphones
18. What is one of the basic units of technology a. Software Engineering b. Wood Work c. Data Science d. Electrical
Marketing
19. Which of the following occupations is NOT part of career prospects in technology a. Mechanical Engineering b.
Telecommunication Engineering c. Fashion Design d. Civil Engineering
20. Which of the following is an essential feature of a workshop layout a. Library b. Office c. Gym d. Cafeteria
21. Why is technology important for students? a. It discourages creativity b. It encourages creativity in students c. It limits
future training d. It makes students dependent
22. What should be worn by workers during welding, drilling and metal cutting? a. T-shirt b. Safety goggles and one ,ask c.
Jeans d. Gloves only
23. _______ is a type of solid mineral substance that is usually hard and shiny and that heat and electricity can travel through
a. Plastic b. Rubber c. Metal d. Ceramics
24. Some metal have that ability to be hammered or beaten into shape without cracking. This quality is known as a.
Malleability b. Ductility c. Toughness d. Fusibility
25. The group of metals that contains iron is known as a. Ferrous metals b. Non-ferrous Metals c. Alloys d. Terrazzo
26. The group of metals that has no iron is not magnetic. Example are as follows except a. Aluminum b. Copper c. Steel d.
Brass
27. _______ is the process by which metals can be softened a. Casting b. Smelting c. Annealing d. Scrubbing
28. The ability of a metal to be melted and cast into shapes is known as a. Brittleness b. Magnetism c. Fusibility d.
Conductivity
29. Metals having weight and volume means the metal has _______ a. Toughness b. Density c. Electricity d. Color
30. _______ means protection from, or not being exposed to, the risk of harm or injury a. Methodology b. Skill c. Safety d.
Technology
SECTION B (THEORY)
INSTRUCTION: Answer any Three (3) questions
1a. Define Technology
b. Mention three (3) basic units of Technology
c. List five (5) importance of Technology

2a. What are Accidents?


b. List four (4) machine safety rules and regulations
c. State four (4) causes of accidents

3a. State five (5) workshop safety precautions


b. Mention five (5) workshop safety devices

4a. List five (5) examples of a soft wood


b. List five (5) external structure of a wood

5a. Explain three (3) methods of processing Metals


b. List seven (7) properties of Metals

GOOD LUCK AND HAPPY HOLIDAYS

You might also like