伊之密品牌管理部策划 2023年10月版

技术 更进一步

90T-1000T
SKⅢ精密伺服注塑机
客户价值更进一步

SKIII SERIES GENERAL-PURPOSE

INJECTION MOLDING MACHINE
Creating more value to customers

广东伊之密精密注压科技有限公司
Yizumi Precision Molding Technology Co., Ltd.

ADD: 广东省佛山市顺德五沙高新区顺昌路12号
Address: No.12 Shunchang Road, Shunde, Foshan, Guangdong 528300, China
TEL: 86-757-2921 9764 86-757-2921 9001(overseas)
Email: [email protected]
www.yizumi.com

【免责声明 DISCLAIMER】
【1】本公司保留对样本中描述产品进行改进的权利，规格如有变更，恕不另行通知。
YIZUMI reserves the right to modify the product description in the catalogue. Specification might be changed without prior notice.
【2】样本中的产品照片仅供参考，产品以实物为准。
The picture in the catalogue is for reference only. The real object should be considered as final.
【3】样本中数据为伊之密厂内测试检验得出，仅作为参考信息，不保证是最新数据，一切以实际产品为准。
The data in the catalogue is obtained from internal testing in YIZUMI laboratory.
Please refer to the actual machine for the final data. YIZUMI reserves the right of final interpretation upon disputes and ambiguities.
THINK TECH FORWARD
 02

客户核心价值主张 CORE VALUE

PROPOSITIONS

效率更进一步 稳定性更进一步 More effective More stable

注射速度提高 全新锁模技术提升 Improved injection speed New clamping technology enhancement
动力全新升级，射胶速度提升 15%-25%，530 吨以下平均 锁模机构刚性提升，锁模力分布平均，加强中心受 With a newly upgraded power system, the injection speed is Enhance the rigidity of clamping mechanism to

射速 100mm/s 以上，
大大提升生产效率及产品质量； 力改善，更可靠耐用；
increased by 15%-25%, while the average injection speed for evenly apply clamping force. Strengthen the center
machines below 530T exceeds 100mm/s, significantly improving force to improve reliability and durability.
production efficiency and product quality.
塑化能力提高 电控系统
Electrical system
全新优化螺杆设计、螺杆转速大大提升，塑化能力进一 升级为全新KEBA系列控制器，屏幕更大，页面切 Improved plasticizing effect Upgraded to the new KEBA series controller with
步提升 5%-10%； 换更流畅； The all-new optimized screw design greatly increases the larger screens and smoother page switching.
screw speed, improving the plasticizing capacity by 5%-10%.

干周期提高 射台结构及塑化组件 Injection unit structure and

整机干周期缩短 5% 以上，提升产品效率； 全新线轨式设计，降低产品不良率； Shorter cycle time plasticizing components
The cycle time of the machine is reduced by more than 5%, to New linear guide design reduces product defects.
enhance efficiency.

节能更进一步 适用性更进一步
全新油路设计 更多的规格，更强的动力和更快的响应速度，更细 More energy-saving Further improved applicability
采用控制管路以及油阀适配性优化设计，减少压力损失； 更精准的段数控制；
产品和原料使用范围更广；
New hydraulic circuit design Offer more specifications, more power, faster

射台结构优化，阻力降低、节能
Optimized adaptability design of control lines and oil valves to response, and more precise stage control.
Wider range of product and raw material
射移、射胶均采用高精度线轨，油封采用低摩擦油封，降
minimize pressure loss.
applications.
低摩擦阻力；
Optimized structure of the injection unit for
lower resistance and higher energy efficiency
伺服系统升级、节能 High-precision linear guide rails for carriage and injection.
采用新一代伺服系统搭配齿轮泵，高转速，能耗低； Employ low-friction oil seal to reduce friction resistance.

Upgraded servo system for higher energy efficiency

Adopt a new generation servo system with gear pump for
higher rotation speed and lower energy consumption.

※页面所有数据均来源于伊之密工厂，请以实际定制设备情况为准

※The Data above were acquired by testing in the factory, only for your reference.
The specific data please accord to the actual equipment.
 04

锁模单元 CLAMPING UNIT

锁模机构全面优化，中心强支撑二板结构、高刚性锁模头板、锁模二板结构设计提升锁模机构整体刚性； 高刚性锁模头板、锁模尾板结构
全系配置T型槽+码模孔组合式模板，既满足方便装拆模具，又提高模板的整体刚性。 Highly rigid fixed platen and tail platen structure

Comprehensive optimization of the clamping unit that enhances overall rigidity of the clamping unit by adopting movable 锁模头板、锁模尾板结构优化，刚性提升 , 形变更小。
platen with strong central support, high-rigidity fixed platen and movable platen Optimization of fixed platen and tail platen structure to enhance rigidity and reduce mold deformation.

The SKIII series is equipped with modular platen design (T-slot + mounting holes) to facilitate the mold loading/unloading
while enhancing the overall rigidity of the platen.

中心强支撑二板结构 导柱及导柱螺母结构
Strong central support to the Tie bar and tie bar nut structure
movable platen structure
独特的导柱卸荷槽设计、导柱及导柱螺母螺纹中径
二板中心强支撑结构设计 , 模板变形更小 , 实现锁 设计，大幅降低应力集中，实现导柱及导柱螺母零
模力平均分布 ; 失效，可靠性更进一步。
使用较低锁模力也能减少模腔尺寸形变 , 提高制品 The unique tie bar unloading groove design
成型精度 , 节能。 and the pitch diameter design for tie bar and
标配
tie bar nut threads greatly reduce stress
Movable platen with strong central support concentration, cause no damage to tie bar
minimizes platen deformation while achieving and tie bar nut, and improve the reliability.
even distribution of clamping force;

U se l owe r c l a m p i n g fo rc e to re d u c e
deformation of mold cavity, improve product
molding accuracy, and save energy.

※页面所有数据均来源于伊之密工厂，请以实际定制设备情况为准

※The Data above were acquired by testing in the factory, only for your reference.
The specific data please accord to the actual equipment.
 06

注射单元 INJECTION UNIT

塑化组件 Plasticizing components

新一代低剪切高混炼塑化组件：提升塑化效率及质量，提升注射
重量重复精度；
原料适用性更广，提升混色效果。

New generation of low-shear high-mixing plasticizing

components: Improve plasticizing efficiency and quality,
and improve injection weight repeatability;

Wider applicability of raw materials and improved

color-mixing effect.

移动射嘴防护罩 Mobile nozzle guard

采用伊之密专利的专用射嘴护罩：射嘴护罩随料筒一同运动，方
便操作与观察。

YIZUMI patented special nozzle guard: The nozzle guard

moves together with the barrel, convenient for operation
全新射台结构升级 Upgraded injection unit and observation.

射胶线轨结构：降低移动摩擦阻力，提高注射精度，提升塑化效率；
射移线轨双射移油缸结构：降低移动摩擦阻力，维护操作方便；
射台所有线轨采用自润滑和储油盒设计，可实现 10 年生产免加润
滑油，并减少润滑油蒸发对车间及环境的污染。

Injection linear guide structure: Reduce motion friction, 全新冷却升级 Newly upgraded cooling system
内藏式冷却水道：冷却面积加大、冷却效果提升 100% 以上，降
increase injection accuracy, and enhance plasticizing
efficiency;
低原料架桥风险，料管组更换更方便；
Linear carriage guide with dual-cylinder: Reduced motion
friction resistance for easy operation and maintenance; Built-in cooling water circuits: Increase cooling area,
improve cooling effect by more than 100%, reduce the risk
All linear guides for injection units adopt self-lubrication and of bridging raw materials, and make it easier to replace
oil chamber design to achieve 10 years of production without the barrel assembly;
lubrication maintenance, reducing the pollution to the
workshop and the environment caused by the evaporation of
lubricant.

优化注射单元 Optimized injection unit 带轴承料斗滑轨 Hopper slide with bearings

整体式射移支架：采用整体射移支架，支撑点前移，射胶头板固定， 新一代带密封带轴承滑轨：拖动更顺滑，更省力，减少漏料。
提升注射部分的稳定性；
New generation of sealed sliding rail with bearings: Allow
射台更换更便捷，加快设备交货期。 smoother sliding with less effort. Reduce material leakage.

Integral carriage support: Adopt integral carriage support to

move forward the support points. Fixed injection plate to
improve the stability of injection section;

Easier injection unit change to shorten production lead time.

※页面所有数据均来源于伊之密工厂，请以实际定制设备情况为准

※The Data above were acquired by testing in the factory, only for your reference.
The specific data please accord to the actual equipment.
 08

液压系统 HYDRAULIC SYSTEM 电控系统 ELECTRICAL SYSTEM

控制系统价值更进一步
Control system with higher value

升级 KEBA 系统；
可以扩展 AO、AI、DO、DI、TM 等多种多个模块，满足更多需求；
实时监测机器配置传感器等信号，匹配相关动作，安全性更高；
支持常用通讯接口 RS232/485，CANOPEN，以太网接口，温度补偿传
感器接口，USB 接口。

Upgraded KEBA system;

Expandable with multiple modules including AO, AI, DO, DI, and
TM to meet more requirements;

Real-time monitoring of signals from machine equipped

sensors to coordinate corresponding movements for higher
operating safety;

Support common RS232/485 communication interface,

CANOPEN, Ethernet port, temperature compensation sensor
connector, and USB port.

速度15段线性控制 15-stage linear control on speed

伊之密第四代伺服节能技术 控制更精准 1% 流量有准确响应，参数调节操作更友好。
YIZUMI’s fourth-generation energy-saving servo technology Offer more precise control. Accurate response to 1% flow.
全新伺服动力系统 , 采用一体式风道技术 , 高转速、低噪音 More user-friendly parameter adjustment.

The all-new servo drive system adopts one-piece air duct technology, offering high speed and low noise.

其他 GENERAL UNIT
整体式高刚性机架
Integral high rigidity frame

采用榫卯结构焊接机架，提高机器整体刚性；
高速运行更稳定，可配重型模具；

Welded machine frame with mortise and tenon construction

响应更进一步 Faster response 全新液压油路设计 All-new hydraulic circuit design to improve the overall rigidity;

射胶熔胶速度响应150ms以内，工艺范围更广。 优化油路流道设计、减少压力损失、更加节能：优化液压原理及 More stable high speed operation, suitable for heavy duty

Injection/Plasticizing response speed within 150ms 阀板管路流道设计、减少油路压力损失、更加节能。 molds;

for wider range of process applications. Optimized oil circuit design for lower pressure loss and
more energy-saving: Use optimized hydraulic principle and
动力更进一步 Stronger power valve plate pipeline design to reduce oil pressure loss and

射胶熔胶高响应速度，工艺范围更广。
improve energy-saving.

低摩擦油封 Low friction oil seal

High response speed for injection/plasticizing for
wider range of process applications.
降低摩擦热，减少能量损失。
※页面所有数据均来源于伊之密工厂，请以实际定制设备情况为准
Reduce frictional heat and energy loss
※The Data above were acquired by testing in the factory, only for your reference.
The specific data please accord to the actual equipment.
 10

UN90˜320SKIII 技术参数表 SPECIFICATIONS

说明 Description 单位 Unit UN90SKIII UN120SKIII UN160SKIII UN200SKIII UN260SKIII UN320SKIII
国际标准规格 International size IU295 IU420 IU604 IU895 IU1000 IU1800

射胶机构 Injection Unit

理论注射容积 Theoretical shot volume cm3 116.6 158.7 207.3 163.6 246.9 307.6 297.7 370.9 452.3 425.2 518.4 664.4 479.5 584.6 749.2 834.1 978.9 1135.3

g(克) 107.3 146.0 190.8 150.5 227.1 283.0 273.9 341.3 416.1 391.2 477.0 611.3 441.2 537.9 689.3 767.3 900.6 1044.4
实际注射量 Shot weight (PS)
oz(盎司) 3.8 5.2 6.7 5.3 8.0 10.0 9.7 12.1 14.7 13.8 16.9 21.6 15.6 19.0 24.4 27.1 31.8 36.9

螺杆直径 Screw diameter mm 30 35 40 35 43 48 43 48 53 48 53 60 48 53 60 60 65 70

注射压力 Injection pressure MPa 252.8 185.7 142.2 257.1 170.4 136.7 203.0 162.9 133.6 210.8 172.9 134.9 210.8 172.9 134.9 217.0 184.9 159.5

注射速率 Injection rate g/s 69.6 94.8 123.8 89.8 135.5 168.8 135.6 169.0 206.0 168.5 205.4 263.2 168.5 205.4 263.2 237.5 278.7 323.2

螺杆长度直径比 Screw L:D ratio 24:1 20:1 20:1 24:1 20:1 20:1 22.3:1 20:1 20:1 22:1 20:1 20:1 22:1 20:1 20:1 22.6:1 20.9:1 19.4:1

塑化效率 Plasticizing effect g/s 10.6 15.2 20.4 16.8 25.2 30.8 27.3 33.8 41.1 28.2 36.8 49.8 24.2 31.5 42.6 43.5 55.2 67.2

最大注射速度 Max. injection speed mm/s 107.1 101.4 101.5 101.2 101.2 91.3

螺杆行程 Screw stroke mm 165 170 205 235 265 295

螺杆转速 Screw speed r/min 0-206 0-233 0-260 0-222 0-190 0-195

锁模机构 Clamping Unit

锁模力 Clamping force kN 900 1200 1600 2000 2600 3200

开模行程 Opening stroke mm 320 360 410 460 530 580

导柱内间距 Space between tie bars (W×H) mm×mm 365×365 415×375 460×440 510×510 570×570 670×670

模板最大距离 Max. daylight mm 670 760 870 980 1100 1240

容模量(最薄-最厚) Mold thickness (min.-max.) mm 130-350 145-400 160-460 180-520 205-570 220-660

顶出行程 Ejector stroke mm 100 120 140 150 160 170

顶出孔数量 Number of ejector pin holes 5 5 5 5 13 13

顶出力 Ejector force kN 28 42 42 49 77 77

动力/电热 Power Unit

最大系统压力 Max. system pressure MPa 17.5 17.5 17.5 17.5 17.5 17.5

电机最大功率 Max. motor power kW 13.2 21.4 25.2 29.3 29.3 35.2

电热功率 Heating capacity kW 6.9/7.8 9/10.1 10.9/12.1 13.06/15.36 13.06/15.36 22.9

温度控制区数 Number of temp control zones 4 4 4 5 5 5

其它 Other

干循环时间 Dry cycle time s 1.9 1.9 2.1 2.7 2.8 3.4

油箱容量 Oil tank capacity L 120 146 167 230 230 326

外形尺寸 Machine dimensions (LxWxH) m×m×m 4.34×1.07×1.79 4.4x1.19x1.89 4.99x1.20x1.92 5.47x1.27x2.02 5.87x1.53x2.1 6.63×1.66×2.21

机器重量 Machine weight kg 2800 3200 4100 5000 6700 8800

1. 理论注射容积 = 注塑机料筒截面积 X 注射行程。 1. Theoretical shot volume = barrel sectional area × injection stroke;
2. 实际注射量 = 理论注射容积 X0.92( 以 GPPS 计算）
。 2. Shot weight = theoretical shot volume × 0.92 (GPPS);
3. 正常情况下改善规格参数 , 恕不另行通知。 3. Due to improvement, specifications may be changed without prior notice.
4. 当您有成型 PVC,PC,PMMA 等工程塑料产品或有其他特殊要求时 , 敬请告知本公司。 4. Please inform us if you need to produce parts made from engineering plastics like PVC, PC, and PMMA or if you have other special requirements;
5. 机型外形以中料筒为准，
大料筒或特殊机型，
按本公司实际尺寸为准。 5. The specification of machine size is based on mid-size barrel. If you need large-size barrel or a special machine model, please refer to YIZUMI actual size.
 12

UN380˜1000SKIII 技术参数表 SPECIFICATIONS

说明 Description 单位 Unit UN380SKIII UN450SKIII UN530SKIII UN630SKIII UN750SKIII UN1000SKIII
国际标准规格 International size IU2260 IU3200 IU4200 IU4500 IU6780 IU9015

射胶机构 Injection Unit

理论注射容积 Theoretical shot volume cm3 1095.0 1270.0 1658.7 1423.9 1859.8 2459.5 2211.6 2438.3 2924.9 3455.7 2211.6 2438.3 2924.9 3455.7 3190.8 3769.8 4397.1 5072.6 4319.6 5038.3 5812.4 6749.3

g(克) 1007.4 1168.4 1526.0 1310.0 1711.0 2262.8 2034.7 2243.2 2690.9 3179.2 2034.7 2243.2 2690.9 3179.2 2935.5 3468.2 4045.3 4666.8 3974.0 4635.3 5347.4 6209.4
实际注射量 Shot weight (PS)
oz(盎司) 35.6 41.3 53.9 46.3 60.5 80.0 71.9 79.3 95.1 112.3 71.9 79.3 95.1 112.3 103.7 122.6 142.9 164.9 140.4 163.8 189.0 219.4

螺杆直径 Screw diameter mm 65 70 80 70 80 92 80 84 92 100 80 84 92 100 92 100 108 116 100 108 116 125

注射压力 Injection pressure MPa 207.1 178.6 136.7 225.9 172.9 130.8 190.3 172.6 143.9 121.8 201.7 182.9 152.5 129.1 212.9 180.2 154.5 133.9 208.9 179.1 155.2 133.7

注射速率 Injection rate g/s 308.3 357.6 467.1 356.5 465.7 615.8 470.3 518.5 622.0 734.8 443.9 489.4 587.1 693.6 555.9 656.8 766.1 883.8 659.0 768.6 886.7 1029.6

螺杆长度直径比 Screw L:D ratio 21.5:1 20:1 20:1 22.8:1 20:1 20:1 23.2:1 22:1 21.7:1 20:1 23.2:1 22:1 21.7:1 20:1 21.7:1 22:1 21.5:1 20:1 21.7:1 22:1 21.5:1 20:1

塑化效率 Plasticizing effect g/s 48.2 59.8 84.1 55.2 73.8 82.9 66.2 72.5 82.5 86 66.2 72.5 91.5 88.2 90.2 105.3 124.3 143.2 90.2 106.7 132.2 143.5

最大注射速度 Max. injection speed mm/s 101 100.7 101.7 96.0 90.9 91.2

螺杆行程 Screw stroke mm 330 370 440 440 480 550

螺杆转速 Screw speed r/min 0-176 0-163 0-147 0-128 0-147 0-128 0-143 0-120 0-118 0-106

锁模机构 Clamping Unit

锁模力 Clamping force kN 3800 4500 5300 6300 7500 10000

开模行程 Opening stroke mm 660 740 825 900 980 1120

导柱内间距 Space between tie bars (W×H) mm×mm 710×710 780×780 830×800 880×880 980×960 1090×1090

模板最大距离 Max. daylight mm 1370 1520 1675 1800 1960 2220

容模量(最薄-最厚) Mold thickness (min.-max.) mm 250-710 310-780 350-850 400-900 400-980 500-1100

顶出行程 Ejector stroke mm 210 220 220 280 280 320

顶出孔数量 Number of ejector pin holes 13 13 17 21 21 21

顶出力 Ejector force kN 110 110 166 182 182 215

动力/电热 Power Unit

最大系统压力 Max. system pressure MPa 17.5 17.5 17.5 17.5 17.5 17.5

电机最大功率 Max. motor power kW 55.5 66 66 66 76.4 98.4

电热功率 Heating capacity kW 25.1/27.44 31.33/39.22 33.69/36.69/41.94 33.69/36.69/41.94 42/51 46.5/63.6

温度控制区数 Number of temp control zones 5 6 6 7 7 6

其它 Other

干循环时间 Dry cycle time s 3.6 3.9 5.2 5 5.4 7.8

油箱容量 Oil tank capacity L 410 510 570 570 720 720

外形尺寸 Machine dimensions (LxWxH) m×m×m 7.5×1.9×2.1 8.33×1.99×2.2 8.87x2.06x2.16 9.1x2.14x2.11 10.3×2.5×2.3 11.37×2.60×2.66

机器重量 Machine weight kg 12100 15000 17100 28000 40000 50000

1. 理论注射容积 = 注塑机料筒截面积 X 注射行程。 1. Theoretical shot volume = barrel sectional area × injection stroke;
2. 实际注射量 = 理论注射容积 X0.92( 以 GPPS 计算）
。 2. Shot weight = theoretical shot volume × 0.92 (GPPS);
3. 正常情况下改善规格参数 , 恕不另行通知。 3. Due to improvement, specifications may be changed without prior notice.
4. 当您有成型 PVC,PC,PMMA 等工程塑料产品或有其他特殊要求时 , 敬请告知本公司。 4. Please inform us if you need to produce parts made from engineering plastics like PVC, PC, and PMMA or if you have other special requirements;
5. 机型外形以中料筒为准，
大料筒或特殊机型，
按本公司实际尺寸为准。 5. The specification of machine size is based on mid-size barrel. If you need large-size barrel or a special machine model, please refer to YIZUMI actual size.
 14

模板尺寸图
Platen Dimensions

UN90SKIII UN160SKIII

UN120SKIII UN200SKIII

※页面所有数据均来源于伊之密工厂，请以实际定制设备情况为准

※The Data above were acquired by testing in the factory, only for your reference.
The specific data please accord to the actual equipment.
 16

模板尺寸图
Platen Dimensions

UN260SKIII UN380SKIII

UN320SKIII UN450SKIII

※页面所有数据均来源于伊之密工厂，请以实际定制设备情况为准

※The Data above were acquired by testing in the factory, only for your reference.
The specific data please accord to the actual equipment.
 18

模板尺寸图
Platen Dimensions

UN530SKIII UN750SKIII

UN630SKIII UN1000SKIII

※页面所有数据均来源于伊之密工厂，请以实际定制设备情况为准

※The Data above were acquired by testing in the factory, only for your reference.
The specific data please accord to the actual equipment.
 20

外形尺寸图
Machine Dimensions

4128 5310
2207 275 2807 295
535 535 632 632

1378

1642
1782

2014
1601

1831
UN90SKIII UN200SKIII

1337

1533
1136

1302
38

40
970 620 657 1180 835 852
3715 4663
4338 5462

4325
5845
2252 275 3218 325
623 565
775 752
1423

1750
1822
1632

2097
UN120SKIII UN260SKIII

2007
1375
1165

1606
1375
38

40
970 668 717 1481 826 875
3775 4944
4399 5862

4983 6628
2637 295 3445
600 600 350
840 817
1548

1865
1911

2202
UN160SKIII UN320SKIII

2013
1730

1709
1479

1430
1248

40
40

1088 757 1562 955 1005

787
4120 5650

4919 6585

※页面所有数据均来源于伊之密工厂，请以实际定制设备情况为准

※The Data above were acquired by testing in the factory, only for your reference.
The specific data please accord to the actual equipment.
 22

外形尺寸图
Machine Dimensions

9100

4725 1102 1037

500

1914
2299
UN380SKIII UN630SKIII

1621
1329

90
8225
1120
8955

UN450SKIII UN750SKIII

UN530SKIII UN1000SKIII

※页面所有数据均来源于伊之密工厂，请以实际定制设备情况为准

※The Data above were acquired by testing in the factory, only for your reference.
The specific data please accord to the actual equipment.
UN90-530SKIII 标配选配表
24

标准配置 备选配置 标准配置 备选配置

射胶/熔胶部分 系统压力流量自动校正 ●

整体式射台支架配线性导轨 ● 熔胶背压调节装置 ●

双缸平衡注射系统 ● 外露高压油管配防爆链 ●

低速大扭矩液压马达 ● 多组运水装置并配快速插头 ●

氮化合金钢螺杆料筒 ● 低摩擦密封元件 ●

料管节能环结构（专利设计） ● 变量泵系统 ○
料管多段PID温度控制(4-7段) ● 加大一级油泵电机 ○
双射移油缸 ● 加大多级熔胶马达 ○
射胶、熔胶故障自动检测 ● 同步顶出、抽芯、熔胶系统 ○
精密电子尺控制熔胶行程/射胶行程 ● 注射采用伺服阀控制 ○
螺杆防冷启动功能 ● 开合模采用比例阀控制 ○
自动清料功能 ● 多组抽芯装置 ○
熔胶前、后松退可选 ● 加装液压旋转脱模装置 ○
注射速度、压力、位置6段设定 ● 独立油温控制 ○
保压速度、压力、时间5段设定 ● 油温检测及高低温报警 ○
储料速度、压力、位置3段设定 ● 控制系统
滚动料斗装置（60T-320T） ● 料管加热强制保护 ●

加长射嘴 ○ 输入、输出检视画面 ●

专用料管组（电镀、合金、PC、PMMA、PBT等） ○ 自动保温及自动加热设定功能 ●

料筒风冷装置 ○ 射胶转保压方式：时间/位置/时间+位置 ●

弹簧自锁射嘴/液压射嘴 ○ 动作斜率的独立调整 ●

加大注射行程或加大（减少）一级射胶结构 ○ 锁模力自动调整功能 ●

旋转射台 ○ 工艺参数锁定功能 ●

陶瓷发热圈（630T以上标配） ○ 1000组大容量工艺参数存贮空间 ●

料筒保温节能装置（硅胶保温、红外线加热） ○ 10.4''TFT真彩色LCD显示屏 ●

不锈钢料斗 ○ 多种操作语言 ●

锁模部分 2组/三相电源插座（16A+32A） ●

精密电子尺控制锁模/顶针行程 ● 预留吹风、抽芯、顶退回保护等多种接口 ●

锁模三大板/机铰采用QT500-7A高刚性球墨铸铁 ● 前、后机门急停开关保护 ●

电脑控制两段顶出前进/后退动作 ● 两色报警灯 ●

欧规机械手机械定位接口 ● 热流道接口 ○
液压驱动齿轮调模装置 ● 气动顺序阀 ○
液压/电气双重保护装置 ● 电动旋转脱模接口 ○
移动模板耐磨锰钢带轨道 ● 吹气带阀装置 ○
自动集中润滑系统 ● 气辅注射装置 ○
多种顶针控制功能可选 ● 中央（联网）监控系统 ○
低压模具保护功能 ● 前、后机门内光栅保护 ○
T型槽、码模孔复合模板 ● 电脑整机能耗显示 ○
加装特殊模具安装孔 ○ 更改电源电压 ○
加装模具隔热板 ○ 其他配置
加大顶出力、加大顶出行程 ○ 说明书 ●

加大容模量 ○ 可调防震避震脚 ●

磁力模板 ○ 模具压板 ●

吊模架 ○ 工具箱及工具一套，精密过滤器滤芯一件 ●

液压系统 自动上料机 ○
第四代伺服系统 ● 玻璃管冷却流量计 ○
高精密实时旁路滤油器装置 ● 干燥机 ○
低噪音节能型液压回路 ● 除湿机 ○
高性能液压控制阀 ● 模具温度控制器 ○
外置式冷却器 ●
※页面所有数据均来源于伊之密工厂，请以实际定制设备情况为准 ※The Data above were acquired by testing in the factory, only for your reference.
The specific data please accord to the actual equipment.
 26
UN90-530SKIII Standard & Optional Features
Standard Optional Standard Optional
Injection Unit Automatic calibration of pressure and flow ●

One-piece injection unit support with linear guides ● Plasicizing back pressure adjustment device ●

Parallel double-cylinder injection system ● Cable hose restraint for exposed HP hydraulic hose ●

Low-speed high-torque hydraulic motor ● Multi-channel cooling water devices with fast connectors ●

Nitrided alloy-steel screw and barrel ● Low-friction seal ●

Energy-saving groove design of barrel (patented design) ● Variable displacement pump system ○
Multi-stage PID barrel temperature control (4-7 stage) ● Enlarged oil pump and motor (1-satge) ○
Double-carriage cylinder ● Enlarged plasticizing motor (multi-satge) ○
Automatic detection of injection and plasticizing faults ● Synchronized ejection, core pulling and plasticizing system ○
Precision transducer for injection/ plasticizing stroke control ● Servo valve for injection ○
Cold start protection ● Proportional valve for mold opening and closing ○
Automatic purging ● Multiple sets of core puller ○
Selectable suck-back before or after plasticizing ● Additional hydraulic unscrewing device ○
6-stage injection control (speed, pressure, position) ● Independent oil temperature control ○
5-stage holding pressure control (speed, pressure, position) ● Automatic oil temperature detection and alarm ○
3-stage storage control (speed, pressure, position) ● Control System
Sliding hopper (60T-320T) ● Barrel heater protection ●

Extended nozzle ○ Input/output inspection ●

Dedicated barrel unitElectroplated, alloyed, PC, PMMA PBT, ect. ○ Automatic heat retaining and automatic heating setting ●

Barrel air-cooling device ○ Time / position / time + position controlled switchover from injection to holding ●

Spring shut-off nozzle/hydraulic nozzle ○ Separate adjustment of motion slope ●

Increased injection stroke or one-size larger (smaller) injection unit ○ Automatic clamping force adjustment ●

Swivel injection unit ○ Molding data locking function ●

Ceramic heater band (standard on machines over 630T) ○ Storage space for 1000 sets of process parameters ●

Barrel heat-retaining energy-saving device (silicone heat preservation, infrared heating) ○ 10.4'' TFT true color display ●

Stainless steel hopper ○ Multiple operating languages ●

Clamping Unit Two sets of 3-phase power socket (16A+32A) ●

Precision transducer for clamping / ejector stroke control ● Reserved interfaces for air blowers, cores, and ejector backward protection ●

Clamping platens / toggles made of highly-rigid ductile iron QT500-7A ● Emergency stop buttons for front and rear safety gates ●

2-stage ejector forward/backward control ● Two-color alarm light ●

EUROMAP-based robot mounting holes ● Hot runner interface ○

Hydraulic mold height adjustment device ● Pneumatic sequence valve ○
Hydraulic / electrical safety devices ● Interface for electric unscrewing interface ○
Wear-resistant manganese steel supporting tracks for movable platen ● Air blowing with valve ○
Automatic centralized lubrication system ● Air-assisted injection device ○
Multiple ejector function settings ● Central (networked) monitoring system ○
Low-pressure mold protection ● Protective light grid of safety gates ○
Platen with T-slots and screw holes ● Display of overall energy consumption ○
Special mold mounting hole ○ Change of power supply voltage ○
Mold thermal insulation plate ○ Other
Increased ejector force & stroke ○ Operation manual ●

Increased mold thickness ○ Leveling pad ●

Magnetic platen ○ Mold retaining plate ●

Mold lifting device ○ A tool kit and a precision filter ●

Hydraulic System Auto loader ○
Fourth-generation servo motor system ● Glass tube flowmeter ○
High-precision bypass oil filter ● Dryer ○
Low-noise energy-efficient hydraulic circuit ● Dehumidifier ○
High-performance hydraulic valve ● Mold temperature controller ○
External cooler ●
※页面所有数据均来源于伊之密工厂，请以实际定制设备情况为准 ※The Data above were acquired by testing in the factory, only for your reference.
The specific data please accord to the actual equipment.
UN630-1000SKIII 标配选配表
28

标准配置 备选配置 标准配置 备选配置

射胶/熔胶部分 系统压力流量自动校正 ●

整体式射台支架配线性导轨 ● 熔胶背压调节装置 ●

双缸平衡注射系统 ● 外露高压油管配防爆链 ●

低速大扭矩液压马达 ● 多组运水装置并配快速插头 ●

氮化合金钢螺杆料筒 ● 低摩擦密封元件 ●

料管节能环结构（专利设计） ● 变量泵系统 ○
料管多段PID温度控制(6-9段) ● 加大一级油泵电机 ○
双射移油缸 ● 加大多级熔胶马达 ○
射胶、熔胶故障自动检测 ● 同步顶出、抽芯、熔胶系统 ○
精密电子尺控制熔胶行程/射胶行程 ● 注射采用伺服阀控制 ○
螺杆防冷启动功能 ● 开合模采用比例阀控制 ○
自动清料功能 ● 多组抽芯装置 ○
熔胶前、后松退可选 ● 加装液压旋转脱模装置 ○
注射速度、压力、位置6段设定 ● 独立油温控制 ○
保压速度、压力、时间5段设定 ● 油温检测及高低温报警 ○
储料速度、压力、位置3段设定 ● 控制系统
数控比例背压 ● 料管加热强制保护 ●

加长射嘴 ○ 输入、输出检视画面 ●

专用料管组（电镀、合金、PC、PMMA、PBT等） ○ 自动保温及自动加热设定功能 ●

料筒风冷装置 ○ 射胶转保压方式：时间/位置/时间+位置 ●

弹簧自锁射嘴/液压射嘴 ○ 动作斜率的独立调整 ●

加大注射行程或加大（减少）一级射胶结构 ○ 锁模力自动调整功能 ●

旋转射台 ○ 工艺参数锁定功能 ●

滑动/滚动料斗装置 ○ 1000组大容量工艺参数存贮空间 ●

料筒保温节能装置（硅胶保温、红外线加热） ○ 10.4''TFT真彩色LCD显示屏 ●

不锈钢料斗 ○ 多种操作语言 ●

上料平台 ○ 3组/三相电源插座（2x32A+16A） ●

锁模部分 预留吹风、抽芯、顶退回保护等多种接口 ●

精密电子尺控制锁模/顶针行程 ● 前、后机门急停开关保护 ●

锁模三大板/机铰采用QT500-7A高刚性球墨铸铁 ● 两色报警灯 ●

电脑控制两段顶出前进/后退动作 ● 热流道接口 ○
欧规机械手机械定位接口 ● 气动顺序阀 ○
液压驱动齿轮调模装置 ● 电动旋转脱模接口 ○
液压/电气双重保护装置 ● 吹气带阀装置 ○
移动模板耐磨锰钢带轨道 ● 气辅注射装置 ○
自动集中润滑系统 ● 中央（联网）监控系统 ○
多种顶针控制功能可选 ● 前、后机门内光栅保护 ○
低压模具保护功能 ● 电脑整机能耗显示 ○
T型槽、码模孔复合模板 ● 更改电源电压 ○
加装特殊模具安装孔 ○ 其他配置
加装模具隔热板 ○ 说明书 ●

加大顶出行程 ○ 可调防震避震脚 ●

加大容模量 ○ 模具压板 ●

磁力模板 ○ 工具箱及工具一套，精密过滤器滤芯一件 ●

液压系统 自动上料机 ○
第三代伺服系统 ● 玻璃管冷却流量计 ○
高精密实时旁路滤油器装置 ● 干燥机 ○
低噪音节能型液压回路 ● 除湿机 ○
高性能液压控制阀 ● 模具温度控制器 ○
外置式冷却器 ●
※页面所有数据均来源于伊之密工厂，请以实际定制设备情况为准 ※The Data above were acquired by testing in the factory, only for your reference.
The specific data please accord to the actual equipment.
 30
UN630-1000SKIII Standard & Optional Features
Standard Optional Standard Optional
Injection Unit Automatic calibration of pressure and flow ●

One-piece injection unit support with linear guides ● Plasicizing back pressure adjustment device ●

Parallel double-cylinder injection system ● Cable hose restraint for exposed HP hydraulic hose ●

Low-speed high-torque hydraulic motor ● Multi-channel cooling water devices with fast connectors ●

Nitrided alloy-steel screw and barrel ● Low-friction seal ●

Energy-saving groove design of barrel (patented design) ● Variable displacement pump system ○
Multi-stage PID barrel temperature control (6-9 stage) ● Enlarged oil pump and motor (1-satge) ○
Double-carriage cylinder ● Enlarged plasticizing motor (multi-satge) ○
Automatic detection of injection and plasticizing faults ● Synchronized ejection, core pulling and plasticizing system ○
Precision transducer for injection/ plasticizing stroke control ● Servo valve for injection ○
Cold start protection ● Proportional valve for mold opening and closing ○
Automatic purging ● Multiple sets of core puller ○
Selectable suck-back before or after plasticizing ● Additional hydraulic unscrewing device ○
6-stage injection control (speed, pressure, position) ● Independent oil temperature control ○
5-stage holding pressure control (speed, pressure, position) ● Automatic oil temperature detection and alarm ○
3-stage storage control (speed, pressure, position) ● Control System
Digital proportional back pressure ● Barrel heater protection ●

Extended nozzle ○ Input/output inspection ●

Dedicated barrel unitElectroplated, alloyed, PC, PMMA PBT, ect. ○ Automatic heat retaining and automatic heating setting ●

Barrel air-cooling device ○ Time / position / time + position controlled switchover from injection to holding ●

Spring shut-off nozzle/hydraulic nozzle ○ Separate adjustment of motion slope ●

Increased injection stroke or one-size larger (smaller) injection unit ○ Automatic clamping force adjustment ●

Swivel injection unit ○ Molding data locking function ●

Sliding hopper ○ Storage space for 1000 sets of process parameters ●

Barrel heat-retaining energy-saving device (silicone heat preservation, infrared heating) ○ 10.4'' TFT true color display ●

Stainless steel hopper ○ Multiple operating languages ●

Loading platform ○ Three sets of 3-phase power socket (2x32A+16A) ●

Clamping Unit Reserved interfaces for air blowers, cores, and ejector backward protection ●

Precision transducer for clamping / ejector stroke control ● Emergency stop buttons for front and rear safety gates ●

Clamping platens / toggles made of highly-rigid ductile iron QT500-7A ● Two-color alarm light ●

2-stage ejector forward/backward control ● Hot runner interface ○

EUROMAP-based robot mounting holes ● Pneumatic sequence valve ○
Hydraulic mold height adjustment device ● Interface for electric unscrewing interface ○
Hydraulic / electrical safety devices ● Air blowing with valve ○
Wear-resistant manganese steel supporting tracks for movable platen ● Air-assisted injection device ○
Automatic centralized lubrication system ● Central (networked) monitoring system ○
Multiple ejector function settings ● Protective light grid of safety gates ○
Low-pressure mold protection ● Display of overall energy consumption ○
Platen with T-slots and screw holes ● Change of power supply voltage ○
Special mold mounting hole ○ Other
Mold thermal insulation plate ○ Operation manual ●

Increased ejector stroke ○ Leveling pad ●

Increased mold thickness ○ Mold retaining plate ●

Magnetic platen ○ A tool kit and a precision filter ●

Hydraulic System Auto loader ○
Third-generation servo motor system ● Glass tube flowmeter ○
High-precision bypass oil filter ● Dryer ○
Low-noise energy-efficient hydraulic circuit ● Dehumidifier ○
High-performance hydraulic valve ● Mold temperature controller ○
External cooler ●
※页面所有数据均来源于伊之密工厂，请以实际定制设备情况为准 ※The Data above were acquired by testing in the factory, only for your reference.
The specific data please accord to the actual equipment.